V = Vf Vi = 18 cm3 18000 cm3 = 17982 cm3, for example. Since the volume in the final state is less than the volume in the starting state, the change is negative.
(a) Because K is in the fourth period whereas Na is in the third, K has a substantially higher atomic radius (280 pm vs. 227 pm). K has a bigger size since it has an additional shell.
(b) Because the K+ ion is significantly more stable than the Ca+ ion, the first-ionization energy of K is lower than that of Ca. K has the following electronic configuration: 1s2 2s2 2p6 3s1. The cation achieves the stable structure of a noble gas after losing an electron.
(c) The brittle, ionic compound Na2O also has the formula M2O. This is true because potassium and sodium are both members of the same periodic table group. They are chemically similar since they both have valency+1.
(d) The chemist has the ability to identify the substance in the sample. The chemist can determine the mass of K in the sample using elemental analysis because he is aware of its mass. The ratio of K to O in the sample can then be calculated, and it can be compared to ratios of K2O or K2O2.
To know more about electronic configuration, click here:
https://brainly.com/question/29757010
#SPJ4
6. A sealed flask filled with an ideal gas is moved from an ice bath into a hot water bath. The initial temperature is 273K and
the final temperature is 350 K. The initial pressure is 100kPa. The volume does not change. What is the final pressure of the flask? Name the gas law.
Answer:
Explanation:
Since the volume of the gas does not change, we can use the Gay-Lussac's law (also known as Pressure-Temperature law), which states that the pressure of an ideal gas is directly proportional to its absolute temperature when the volume is kept constant. Mathematically, this can be expressed as:
P1/T1 = P2/T2
where P1 and T1 are the initial pressure and temperature, respectively, and P2 and T2 are the final pressure and temperature, respectively.
Substituting the given values in the above equation, we get:
P2 = (P1/T1) × T2
= (100 kPa/273 K) × 350 K
= 128.83 kPa (approx.)
Therefore, the final pressure of the flask is approximately 128.83 kPa.
you find that the delta h of a solution is 105.2kj/mol and the delta s of the same solution is found to be 54.1kj/mol*k at 254k. what is the solnG of the solution? Is the reaction exothermic or endothermic? Are the reactants or products favorable?
The delta h of a solution is 105.2kj/mol and the delta s of the same solution is found to be 54.1kj/mol*k at 254k. what is the solnG of the solution:
To determine the sol n G (ΔG) of the solution, we will use the Gibbs free energy equation:
ΔG = ΔH - TΔS
Given the values:
ΔH = 105.2 kJ/mol
ΔS = 54.1 J/mol*K (note that it should be J/mol*K, not kJ/mol*K)
T = 254 K
Now, we can calculate ΔG:
ΔG = 105.2 kJ/mol - (254 K * 54.1 J/mol*K * (1 kJ/1000 J))
ΔG = 105.2 kJ/mol - (254 K * 0.0541 kJ/mol*K)
ΔG ≈ 105.2 kJ/mol - 13.7 kJ/mol
ΔG ≈ 91.5 kJ/mol
The solnG of the solution is approximately 91.5 kJ/mol. Since ΔH is positive, the reaction is endothermic. A positive ΔG indicates that the reaction is non-spontaneous, meaning the reactants are more favorable than the products under the given conditions.
To know more about Gibbs free energy:
https://brainly.com/question/13318988
#SPJ11
Almost all cells contain the enzyme inorganic pyrophosphatase, which catalyzes the hydrolysis of PP, to P, What effect does the presence of this enzyme have on the synthesis of acetyl-CoA? A. Hydrolysis of pyrophosphate increases the rate of the reaction. B. Hydrolysis of pyrophosphate shifts the equilibrium of the reaction to the left, making the formation of acetyl-CoA energetically less favorable." C. Hydrolysis of pyrophosphate decreases the rate of the reaction. D. Hydrolysis of pyrophosphate shifts the equilibrium of the reaction to the right, making the formation of acetyl-CoA energetically more favorable. E. Hydrolysis of pyrophosphate has no effect on the reaction.
The correct answer is D. Hydrolysis of pyrophosphate shifts the equilibrium of the reaction to the right, making the formation of acetyl-CoA energetically more favorable.
PP ⇒ P
Explanation:
Enzyme inorganic pyrophosphatase catalyzes the hydrolysis of PP to P. This hydrolysis releases energy, which drives the synthesis of acetyl-CoA forward.
PP ⇄⇒ acetyl-CoA
By breaking down the pyrophosphate bond (P-P), the enzyme effectively removes it from the reaction, shifting the equilibrium to the right and making the formation of acetyl-CoA more favorable energetically.
To know more about hydrolysis, click on the below link:
https://brainly.com/question/29439050
#SPJ11
define depolarization. how does it differ from repolarization? discuss in terms of ions and direction of ion movement.
Depolarization refers to the process by which the membrane potential of a cell becomes less negative. This occurs as positively charged ions, such as sodium (Na+) or calcium (Ca2+), enter the cell through ion channels in the membrane. The movement of these ions into the cell causes the membrane potential to become less negative, which is known as depolarization.
On the other hand, repolarization refers to the process by which the membrane potential returns to its resting state after depolarization. This occurs as positively charged ions, such as potassium (K+), leave the cell through ion channels in the membrane. The movement of these ions out of the cell causes the membrane potential to become more negative, which is known as repolarization.
The main difference between depolarization and repolarization is the direction of ion movement. Depolarization involves the movement of positively charged ions into the cell, while repolarization involves the movement of positively charged ions out of the cell. Additionally, different ion channels are responsible for depolarization and repolarization. Sodium channels are primarily responsible for depolarization, while potassium channels are primarily responsible for repolarization.
Learn More about Depolarization here :-
https://brainly.com/question/29698882
#SPJ11
PLEASEE
Explain the relationship between electrons and protons in a positive ion.
Answer:
In a positive ion, the number of electrons are less than the number of protons.
Explanation:
Answer:
A positive ion, also known as a cation, is formed when an atom loses one or more electrons. Electrons are negatively charged particles that orbit the nucleus of an atom. The nucleus contains positively charged particles called protons and neutral particles called neutrons.
In a neutral atom, the number of electrons is equal to the number of protons. When an atom loses one or more electrons, the balance between the number of protons and electrons is disrupted. Since there are now more protons than electrons, the atom becomes positively charged and is now a cation.
For example, when a sodium atom (Na) loses one electron, it becomes a sodium cation (Na+). The sodium atom has 11 protons and 11 electrons. When it loses one electron, it now has 11 protons and 10 electrons. Since there is one more proton than an electron, the sodium cation has a charge of +1.
Enter the half-reaction occurring at Cathode for the electrochemical cell labeled in Part C.Express your answer as a chemical equation. Identify all of the phases in your answer.Previously in Part C;Ni2+(aq)+2e−→Ni(s)Ni2+(aq)+2e−→Ni(s)The half-reaction reaction that occurs at the cathode is reduction (electron gain).Overall:Ni2+(aq)+Mg(s)→Ni(s)+Mg2+(aq)Cathode: Ni2+(aq)+2e−→Ni(s)
The half-reaction occurring at the cathode for the given electrochemical cell is - Ni²⁺(aq) + 2 e⁻ → Ni (s)
A half-reaction is part of the total reaction that represents, on its own, either oxidation or reduction. A redox reaction requires two half-reactions, one oxidation, and one reduction.
At the cathode, the reduction of Nickel will take place. the reduction half-reaction is expressed as
Ni²⁺(aq) + 2 e⁻ → Ni (s) - equation 1
At the anode, the oxidation of magnesium will take place. So the oxidation half-reaction is expressed as
Mg (s) → Mg²⁺ +2e⁻ - equation 2
So the overall chemical equation is
Ni²⁺ (aq) + Mg (aq) → Ni (s) + Mg²⁺(aq)
Equation 1 is the half-reaction occurring at the cathode.
To learn more about half-reaction, refer to the link:
https://brainly.com/question/18403544
#SPJ12
what is the change in the enthalpy for the complete combustion of 39.0g of fructose, roughly the amount of sugar in a 12-oz can of soda?C6H12O6(s) +6O2 (g) --> 6CO2(g) + 6H2O(I) ΔH = -2.83 x 10 kJ mol-1 A: -6.13 x 10^2
The change in enthalpy for the complete combustion of 39.0g of fructose is approximately -6.13 x 10² kJ.
To find the change in enthalpy for the complete combustion of 39.0g of fructose, we need to follow these steps:
1. Determine the molar mass of fructose (C6H12O6).
2. Convert the given mass of fructose (39.0g) to moles.
3. Use the stoichiometry of the balanced equation to determine the change in enthalpy (ΔH) for the given moles of fructose.
Determine the molar mass of fructose (C6H12O6)
Molar mass = (6 × 12.01) + (12 × 1.01) + (6 × 16.00) = 72.06 + 12.12 + 96.00 = 180.18 g/mol
Convert the given mass of fructose (39.0g) to moles
moles of fructose = mass / molar mass = 39.0g / 180.18 g/mol ≈ 0.216 mol
Use the stoichiometry of the balanced equation to determine the change in enthalpy (ΔH) for the given moles of fructose
ΔH = -2.83 x 10³ kJ/mol × 0.216 mol ≈ -6.13 x 10^2 kJ
So, approximately -6.13 x 10² kJ is the change in enthalpy for the complete combustion of 39.0g of fructose.
More on enthalpy: https://brainly.com/question/22407879
#SPJ11
What is the net ionic equation of the reaction of MgSO4 with Sr(NO3)2? Express you answer as a chemical equation including phases.
I have tried this several times myself and it has told me my answers are wrong, here were my answers,
SO2−4(aq)+Sr2+(aq)→SrSO4(s)
SO4(aq)2−+Sr2+(aq)→SrSO4(s)
Sr2+(aq)+SO4(aq)2−→SrSO4(s)
The net ionic equation for the reaction of MgSO4 with Sr(NO3)2 is:
SO42-(aq) + Sr2+(aq) → SrSO4(s)
The net ionic equation of the reaction of MgSO4 with Sr(NO3)2 can be determined by writing the balanced chemical equation and then canceling out the spectator ions that appear on both the reactant and product sides of the equation.
The balanced chemical equation for the reaction is:
MgSO4(aq) + Sr(NO3)2(aq) → Mg(NO3)2(aq) + SrSO4(s)
To write the net ionic equation, we must first identify the ions that are involved in the reaction. In this case, the aqueous solutions contain Mg2+, SO42-, Sr2+, and NO3-.
The spectator ions, which do not participate in the reaction, are Mg2+ and NO3-. Therefore, we can cancel them out to write the net ionic equation as:
SO42-(aq) + Sr2+(aq) → SrSO4(s)
This equation shows the ions that are involved in the reaction and the formation of the solid precipitate SrSO4. The phases for the different species are also included in the equation.
To know more about spectator ions refer to
https://brainly.com/question/9512088
#SPJ11
The net ionic equation for the reaction of MgSO4 with Sr(NO3)2 is:
SO42-(aq) + Sr2+(aq) → SrSO4(s)
The net ionic equation of the reaction of MgSO4 with Sr(NO3)2 can be determined by writing the balanced chemical equation and then canceling out the spectator ions that appear on both the reactant and product sides of the equation.
The balanced chemical equation for the reaction is:
MgSO4(aq) + Sr(NO3)2(aq) → Mg(NO3)2(aq) + SrSO4(s)
To write the net ionic equation, we must first identify the ions that are involved in the reaction. In this case, the aqueous solutions contain Mg2+, SO42-, Sr2+, and NO3-.
The spectator ions, which do not participate in the reaction, are Mg2+ and NO3-. Therefore, we can cancel them out to write the net ionic equation as:
SO42-(aq) + Sr2+(aq) → SrSO4(s)
This equation shows the ions that are involved in the reaction and the formation of the solid precipitate SrSO4. The phases for the different species are also included in the equation.
To know more about spectator ions refer to
https://brainly.com/question/9512088
#SPJ11
sketch the lewis structures for the acid and base forms of 2-naphthol.
2-naphthol, also known as β-naphthol, is a compound that exists in both an acidic and basic form. The acid form has a phenolic hydroxyl group, which can act as a proton donor, while the base form has a deprotonated hydroxyl group.
The Lewis structure of the acid form of 2-naphthol shows the phenolic hydroxyl group (-OH) attached to the aromatic ring of naphthalene. This hydroxyl group forms a hydrogen bond with the neighboring oxygen atom in the ring. The Lewis structure of the base form of 2-naphthol shows the deprotonated hydroxyl group (-O-) attached to the ring. The negative charge on the oxygen is delocalized over the ring, making it more stable.
To draw the Lewis structures of the acid and base forms of 2-naphthol, start by drawing the skeletal structure of the naphthalene ring. Next, add the hydroxyl group (-OH) in the acid form or the deprotonated hydroxyl group (-O-) in the base form. Finally, add any lone pairs of electrons or charges to satisfy the octet rule and maintain charge neutrality.
Overall, the Lewis structures for the acid and base forms of 2-naphthol show the different protonation states of the phenolic hydroxyl group and their effect on the electron density of the naphthalene ring.
Learn more about deprotonated hydroxyl group (-O-)
https://brainly.com/question/28024927
#SPJ4
Which of the following is NOT one of the common Science and Engineering Practices?
a) Planning and Carrying Out Investigations
b) Constructing Explanations and Designing Solutions
c) Communicating information
d) Forming opinions based on personal beliefs
D. Forming opinions based on personal beliefs is NOT one of the common Science and Engineering Practices.
What are Science and Engineering Practices?The Science and Engineering Practices (SEPs) aid scientists and engineers in exploring and resolving issues through a set of techniques and abilities.
These practices are interrelated, manifesting concurrently during scientific as well as engineering examinations, aiming to guide learners towards the acquisition of critical thinking capabilities, adept problem-solving skills, besides instilling a scientific temperament.
Learn about scientific method here https://brainly.com/question/17216882
#SPJ1
The Ksp for a very insoluble salt is 4.2×10−47 at 298 K. What is ΔG∘ for the dissolution of the salt in water?
The for a very insoluble salt is at 298 . What is for the dissolution of the salt in water?
-265 kJ/mol
-115 kJ/mol
-2.61 kJ/mol
+115 kJ/mol
+265 kJ/mol
The -2.61 kJ/mol is for the dissolution of the salt in water.
What is solution ?
A steady change in the relative ratios of two or more substances up to the point at which they become homogenous when combined; this point is known as the limit of solubility.
What is solute ?
Solute refers to an object that dissolves in a solution. In fluid solutions, there is a larger concentration of solvent than solute. Salt and water are two excellent examples of substances that we use on a daily basis. Since salt dissolves in water, it serves as the solute.
Therefore, The -2.61 kJ/mol is for the dissolution of the salt in water.
Learn more about solution from the given link.
https://brainly.com/question/16159788
#SPJ1
Discuss the regulation of citrate synthase and explain why the effectors NADH, ATP and succinyl CoA make sense.The rate of flow is limited by the availability of the citrate synthase substrates, oxaloacetate and acetyl- CoA, or of NAD+, which is depleted by its conversion to NADH.• The enzyme is inhibited by high ratios of [ATP]/[ADP] and [NADH]/[NAD], as high concentrations of ATP and NADH show that the energy supply is high for the cell. This is to make sure not more NADH is produced that is converted into ATP. Similarly, when enough ATP is around, the introduction of acetyl-CoA into the pathway is inhibited.
The regulation of citrate synthase is important for maintaining cellular energy balance. The enzyme is inhibited by effectors such as NADH, ATP, and succinyl CoA, which makes sense due to their roles in cellular energy metabolism.
Citrate synthase catalyzes the reaction between oxaloacetate and acetyl-CoA to form citrate, a key step in the citric acid cycle. The rate of this reaction is limited by the availability of substrates oxaloacetate, acetyl-CoA, and NAD+, which gets converted to NADH during the cycle.
High concentrations of NADH and ATP indicate that the cell has sufficient energy supply. In such cases, citrate synthase is inhibited to prevent excessive production of NADH, which would ultimately lead to more ATP generation. This ensures that the cell does not produce more energy than needed.
Similarly, when there is an abundance of ATP, the enzyme is inhibited to prevent the introduction of acetyl-CoA into the citric acid cycle. This allows the cell to maintain an optimal energy balance by preventing unnecessary energy production.
In conclusion, the regulation of citrate synthase by effectors such as NADH, ATP, and succinyl CoA is crucial for maintaining cellular energy homeostasis. By responding to the concentrations of these molecules, citrate synthase helps to ensure that the cell produces the appropriate amount of energy for its needs.
To know more about Citrate synthase:
https://brainly.com/question/14845050
#SPJ11
A compound is isolated from the rind of lemons that is found to be 88 14% carbon and 11 86% hydrogen by mass. How many grams of C and H are there in a 240.0 g sample of this substance? Express your answers using one decimal place separated by a comma.
In a 240.0 g sample of the compound, there are approximately 211.5 g of carbon and 28.5 g of hydrogen. 211.5, 28.5
To find the grams of C and H in a 240.0 g sample of the compound, we need to first calculate the mass percentages of C and H in the compound:
- Mass percent of C: 88.14%
- Mass percent of H: 11.86%
This means that in 100 g of the compound, there are:
- 88.14 g of C
- 11.86 g of H
To find the grams of C and H in a 240.0 g sample, we can use proportions:
- Grams of C = (240.0 g) x (88.14 g C/100 g compound) = 211.5 g C
- Grams of H = (240.0 g) x (11.86 g H/100 g compound) = 28.5 g H
Therefore, there are 211.5 grams of C and 28.5 grams of H in a 240.0 g sample of this compound.
Learn more about compound here:
https://brainly.com/question/6769323
#SPJ11
Give the approximate bond angle for a molecule with a linear shape. Select one: a. 105 b. 109.5 C. 120 d. 180 e. 90
Answer:
d. 180°
Explanation:
Linear means flat, and flat means that it makes a perfect angle of 180°!
how many grams of kno3are required to prepare 250ml of a .700m solution
To prepare 250 mL of a 0.700 M KNO3 solution, you will need to calculate the grams of KNO3 required. You will need 17.69 grams of KNO3 to prepare 250 mL of a 0.700 M solution.
To prepare a 250ml solution of 0.700m, you will need to use the formula:
molarity = moles of solute / liters of solution
First, let's calculate the number of moles of solute required:
moles of solute = molarity x liters of solution
moles of solute = 0.700m x 0.250L
moles of solute = 0.175 moles
Next, we need to convert moles of solute into grams of KNO3, using its molar mass:
molar mass of KNO3 = 101.1032 g/mol
grams of KNO3 = moles of solute x molar mass
grams of KNO3 = 0.175 moles x 101.1032 g/mol
grams of KNO3 = 17.6736 grams
Therefore, you will need 17.6736 grams of KNO3 to prepare 250ml of a 0.700m solution.
Learn more about solution here:
https://brainly.com/question/6566593
#SPJ11
Write the balanced chemical equation for each of the se reactions. Include phases. When aqueous sodium hydroxide is added to a solution containing lead(ll) nitrate, a solid precipitate forms. 2NaOH(aq) + Pb(N03)2(aq) -> Pb(0H)2(s) + 2NaN03(aq) However, when additional aqueous hydroxide is added the precipitate redissolves forming a soluble [Pb(OH)4]2"(aq) complex ion.
The balanced chemical equation for the reaction between aqueous sodium hydroxide and lead(ll) nitrate is:
2NaOH(aq) + Pb(NO3)2(aq) → Pb(OH)2(s) + 2NaNO3(aq)
When additional aqueous hydroxide is added, the precipitate redissolves and forms a soluble [Pb(OH)4]2-(aq) complex ion. The balanced chemical equation for this reaction is:
Pb(OH)2(s) + 2NaOH(aq) + 2H2O(l) → [Pb(OH)4]2-(aq) + 2Na+(aq)
Note that water (H2O) is also a reactant in this reaction.
When aqueous sodium hydroxide is added to a solution containing lead(II) nitrate, a solid precipitate forms as shown in the balanced chemical equation:
2NaOH(aq) + Pb(NO3)2(aq) -> Pb(OH)2(s) + 2NaNO3(aq)
However, when additional aqueous hydroxide is added, the precipitate redissolves forming a soluble [Pb(OH)4]2- complex ion:
Pb(OH)2(s) + 2OH-(aq) -> [Pb(OH)4]2-(aq)
Visit here to learn more about precipitate brainly.com/question/30904755
#SPJ11
an ion of charged +4 has 21 electrons remaining in its atomic structure. what is the nunber of neutrons if it has a mass number of 55? A. 21 B. 25 C. 24 D. 30
An ion of charged +4 has 21 electrons remaining in its atomic structure. 30 is the number of neutrons if it has a mass number of 55. The correct option is option D.
Every atom's nucleus is made up of neutrons and protons, with the exception of common hydrogen, which nucleus only contains one proton. Neutrons are neutral subatomic particles. It is one of the three fundamental particles that make up atoms, the fundamental units of all matter & chemistry, together with protons and electrons.
The neutron is electrically neutral and has a rest mass of 1.67492749804 1027 kg, which is somewhat higher than the proton's but 1,838.68 times higher than the electron's.
atomic number = 21 + 4 = 25
mass number = 55
number of neutron = mass number- atomic number
= 55 -25
= 30
Therefore, the correct option is option D.
To know more about neutron, here:
https://brainly.com/question/28992636
#SPJ1
3. would a drying tube hurt or help in the synthesis of benzocaine? why or why not?
A drying tube would help in the synthesis of benzocaine.
Benzocaine synthesis usually involves an esterification reaction between p-aminobenzoic acid and ethanol or methanol in the presence of a strong acid catalyst.
In this reaction, the carboxylic acid group in p-aminobenzoic acid and the alcohol group in ethanol or methanol react to form an ester bond, with the elimination of a water molecule as a byproduct.
However, the presence of water in the reaction mixture can cause the reaction to be reversible, leading to a reduced overall yield of benzocaine. Therefore, it is essential to use a drying tube to remove water from the reaction environment.
A drying tube typically contains a drying agent, such as calcium chloride or magnesium sulfate, which has a high affinity for water. As the reaction mixture passes through the drying tube, any remaining water molecules are adsorbed by the drying agent, thereby removing them from the reaction environment.
This helps to ensure that the esterification reaction proceeds efficiently and yields a higher amount of benzocaine.
In summary, using a drying tube in the synthesis of benzocaine helps to remove water from the reaction environment, which is essential for ensuring that the esterification reaction proceeds efficiently and yields a higher amount of benzocaine.
To know more about "Acid" refer here:
https://brainly.com/question/3421848#
#SPJ11
atoms or molecules of this state of matter can change shape to any container but do not necessarily occupy the whole space of the container.
The state of matter you are referring to is the liquid state.
In this state, atoms or molecules can change shape to fit the container they are in, but they do not necessarily occupy the whole space of the container, as they are held together by intermolecular forces, giving liquids a definite volume.
The liquid state of matter is one of the four fundamental states of matter, along with solid, gas, and plasma.
In the liquid state, atoms or molecules are in constant motion, but they are still close enough to each other to be held together by intermolecular forces, such as hydrogen bonds, van der Waals forces, and other attractive forces.
One of the key characteristics of liquids is that they have a definite volume, which means that they maintain a fixed amount of space regardless of the shape of the container they are in.
This is because the intermolecular forces prevent the atoms or molecules from spreading out to fill the entire container. Instead, they tend to occupy the bottom of the container due to gravity, forming a level surface known as the liquid's free surface.
However, liquids do not have a definite shape and can change shape to fit the container they are in. This property is known as fluidity, and it allows liquids to flow and take the shape of their container.
To learn more about plasma, refer below:
https://brainly.com/question/13153516
#SPJ11
Given the following balanced equation, determine the rate of reaction with respect to the [NOCl]. If the rate of Cl2 loss is 4.84 * 10-2 M/s, what is the rate of formation of NOCl?2 NO (g) + Cl 2 (g) -----> 2 NOCL (g)
The rate of formation of NOCl, given the rate of [tex]Cl_2[/tex] loss as 4.84 * [tex]10^{-2[/tex] M/s, is: 9.68 * [tex]10^{-2[/tex]M/s.
Determine the rate of reaction with respect to [NOCl]. Given the balanced equation:
2 NO (g) + [tex]Cl_2[/tex] (g) → 2 NOCl (g)
The rate of Cl2 loss is 4.84 * [tex]10^{-2[/tex] M/s. To find the rate of formation of NOCl, we need to compare the stoichiometric coefficients of [tex]Cl_2[/tex] and NOCl in the balanced equation.
Step 1: Identify the stoichiometric coefficients
For [tex]Cl_2[/tex], the coefficient is 1, and for NOCl, the coefficient is 2.
Step 2: Calculate the rate of formation of NOCl
Since the coefficient ratio between NOCl and [tex]Cl_2[/tex] is 2:1, the rate of formation of NOCl is twice the rate of [tex]Cl_2[/tex] loss.
Rate of NOCl formation = 2 * (Rate of [tex]Cl_2[/tex] loss)
Rate of NOCl formation = 2 * (4.84 * [tex]10^{-2[/tex] M/s)
Step 3: Compute the result
Rate of NOCl formation = 9.68 * [tex]10^{-2[/tex] M/s
To know more about "Stoichiometric coefficients" refer here:
https://brainly.com/question/15047541#
#SPJ11
Balance the equations for glycogen degradation. _____+ Pi glycogen phosphorylase ____ + glucose 1-phosphate _____ phosphoglucomutase _____. Balance the equations for glycogen synthesis. _____ + UTP, UDP-glucose + glycogen synthase + UDP-glucose + _____ + UDP-glucose, glycogen synthase _____+ UDP. Complete the balanced equation for the simultaneous activation of glycogen degradation (via glycogen phosphorylase) and glycogen synthesis (via glycogen synthase). glycogen, + ______ --> glycogen, + + Pi
Balance the equations for glycogen degradation:
Glycogen + Pi → Glycogen phosphorylase → Glucose 1-phosphate + Glycogen phosphorylase (remaining)
Phosphoglucomutase → Glucose 6-phosphate + Phosphoglucomutase (remaining)
Balance the equations for glycogen synthesis:
Glucose 1-phosphate + UTP → UDP-glucose + PPi + Glycogen synthase → Glycogen + UDP-glucose + Glycogen synthase (remaining) + UDP
Complete the balanced equation for the simultaneous activation of glycogen degradation (via glycogen phosphorylase) and glycogen synthesis (via glycogen synthase):
Glycogen + Pi + UDP-glucose → Glycogen phosphorylase → Glucose 1-phosphate + Glycogen phosphorylase (remaining) + UDP-glucose → Glycogen synthase → Glycogen + UDP
Here you can learn more about glycogen degradation
https://brainly.com/question/30258784#
#SPJ11
consider the molecule ICI3. the central iodine atom possesses ____ nonbonding (lone) pairs of electrons and____bonding pairs of electrons. you may find a periodic table helpful. a)2,2 b)1,3 c)3,1 d)1,2 e)3,3
Therefore, the central iodine atom possesses 2 nonbonding (lone) pairs of electrons and 3 bonding pairs of electrons. The answer is a) 2, 3.
How to determine the structure of a molecule?The molecule [tex]ICl_{3}[/tex] has a central iodine atom surrounded by three chlorine atoms. Each chlorine atom shares one bonding pair of electrons with the central iodine atom. Therefore, the central iodine atom possesses three bonding pairs of electrons. Looking at the periodic table, we can see that iodine is in group 7, which means it has seven valence electrons. In the molecule [tex]ICl_{3}[/tex], the central iodine atom is using three of its valence electrons to form covalent bonds with the three chlorine atoms.
That leaves four valence electrons on the central iodine atom. These electrons are not involved in any covalent bonds and are therefore nonbonding or lone pairs.
To know more about Non-Bonding Pair of electrons:
https://brainly.com/question/29871097
#SPJ11
For the reaction K = 1.8 × 10−7 at a particular temperature. If the equilibrium system is analyzed and it is found that [O2] = 0.0012 M, what is the concentration of O3 in the system?
The concentration of O₃ in the system can be calculated using the equilibrium constant expression: K = [O₃]²/[O₂] = 1.8 × 10⁻⁷.
Rearranging the equation, [O₃]² = K[O₂] = 1.8 × 10⁻⁷ × 0.0012 = 2.16 × 10⁻¹⁰. Taking the square root of both sides, [O₃] = 1.47 × 10⁻⁵ M.
The given equilibrium constant K relates the concentrations of the products and reactants at equilibrium. For this reaction, the equilibrium constant expression is K = [O₃]²/[O₂]. Given that K = 1.8 × 10⁻⁷ and [O₂] = 0.0012 M, we can solve for [O₃].
Rearranging the equation, [O₃]² = K[O₂]. Substituting the values, we get [O₃]² = 1.8 × 10⁻⁷ × 0.0012 = 2.16 × 10⁻¹⁰. Taking the square root of both sides gives the concentration of O₃ in the system as 1.47 × 10⁻⁵ M.
To know more about equilibrium constant click on below link:
https://brainly.com/question/31321186#
#SPJ11
how much energy would be associated with 1.00 mol photons of electromagnetic radiation with a wavelength of 2.55 x 10-14 m??
4.69 x 10^12 J
7.82 x 10^-12 J
3.99 x 10^-10 J
1.02 x 10^-47 J
The energy associated with one photon of electromagnetic radiation is given by the equation E=hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength.
To find the energy associated with 1.00 mol photons, we first need to find the energy of one photon and then multiply it by Avogadro's number (6.022 x 10^23) to get the energy of 1.00 mol photons.
Using the given wavelength of 2.55 x 10^-14 m, we can calculate the energy of one photon as:
E = hc/λ
E = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (2.55 x 10^-14 m)
E = 2.454 x 10^-19 J
Multiplying by Avogadro's number gives us the energy of 1.00 mol photons:
E(mol) = E(photon) x N_A
E(mol) = (2.454 x 10^-19 J) x (6.022 x 10^23)
E(mol) = 1.475 x 10^5 J/mol
Therefore, the answer is not one of the given choices. The correct answer is 1.475 x 10^5 J/mol.
Learn more about wavelength here:
https://brainly.com/question/31143857
#SPJ11
calculate the ph of a solution that results from mixing 26.8 ml of 0.11 m benzoic acid with 33.1 ml of 0.14 m sodium benzoate. the ka value for c6h5cooh is 6.5 x 10-5.
To calculate the pH of the solution resulting from mixing benzoic acid and sodium benzoate, we need to first determine the concentrations of the benzoic acid and benzoate ions in the solution.
Using the formula for calculating the concentration of the benzoate ion:
[benzoate] = (volume of sodium benzoate x concentration of sodium benzoate) / total volume of solution
[benzoate] = (33.1 mL x 0.14 M) / (26.8 mL + 33.1 mL) = 0.100 M
Similarly, the concentration of the benzoic acid can be calculated:
[benzoic acid] = (volume of benzoic acid x concentration of benzoic acid) / total volume of solution
[benzoic acid] = (26.8 mL x 0.11 M) / (26.8 mL + 33.1 mL) = 0.089 M
Using the Ka value for benzoic acid, we can then calculate the concentration of H+ ions in the solution:
Ka = [H+][benzoate] / [benzoic acid]
[H+] = Ka x [benzoic acid] / [benzoate]
[H+] = (6.5 x 10^-5) x (0.089) / (0.100) = 5.8 x 10^-5 M
Finally, we can calculate the pH using the formula:
pH = -log[H+]
pH = -log(5.8 x 10^-5) = 4.24
Therefore, the pH of the solution resulting from mixing 26.8 mL of 0.11 M benzoic acid with 33.1 mL of 0.14 M sodium benzoate is 4.24.
Learn more about benzoic acid here:
https://brainly.com/question/24052816
#SPJ11
In fruit flies, red eyes are dominant (E). White eyes are recessive (e). If the female fly has white eyes and the male fly has homozygous dominant red eyes, what are the possible phenotypes and genotypes of their offspring?
The fruit fly female must be homozygous recessive for the gene encoding for eye color because she has white eyes. (ee).
How are genotypes determined?The male fly has homozygous red eyes that are dominant. (EE). As a result, each of their children will have one allele from each parent, giving each of them the genotype Ee.
All progeny will have the dominant of red eyes because the red eye allele (E) is dominant over the white eye allele (e). As a result, although having distinct genes, every child will inherit the identical phenotypic of red eyes. (Ee).
As a result, all of the offspring's potential phenotypes—red eyes and heterozygous genotypes—are possible. (Ee).
Learn more about phenotypes here:
brainly.com/question/20730322
#SPJ1
What is the mass of 4.50 x 1022 atoms of gold, Au? (a) 0.0679 g (b) 0.0748 g 13.3 g 14.7 g 2640 g 1.
The mass of 4.50 x 10^22 atoms of gold, Au, is 14.7 g.
To find the mass of 4.50 x 10^22 atoms of gold (Au), we need to use the following steps:
1. Determine the molar mass of gold (Au). From the periodic table, the molar mass of gold is 197 g/mol.
2. Calculate the number of moles of gold atoms by using Avogadro's number (6.022 x 10^23 atoms/mol). Divide the number of atoms (4.50 x 10^22) by Avogadro's number:
(4.50 x 10^22 atoms) / (6.022 x 10^23 atoms/mol) = 0.0748 mol
3. Multiply the number of moles by the molar mass to get the mass of gold atoms:
(0.0748 mol) x (197 g/mol) = 14.7 g
So, the mass of 4.50 x 10^22 atoms of gold (Au) is 14.7 g.
Learn more about molar mass at https://brainly.com/question/837939
#SPJ11
what volume of 6.0 m h2so4 should be mixed with 10. l of 1.0 m h2so4 to make 20. l of 3.0 m h2so4 upon dilution to volume?A 1.7 L B 5.0 L C 8.3 L D 10 L
C) 8.3 L . We should mix 8.3 L of 6.0 M H2SO4 with 10 L of 1.0 M H2SO4 to make 20 L of 3.0 M H2SO4 upon dilution to volume.
.
To make a 20 L solution of 3.0 M H2SO4, we need to calculate the amount of 6.0 M H2SO4 that should be mixed with 10 L of 1.0 M H2SO4.
Let's use the equation:
M1V1 + M2V2 = M3V3
where M1 and V1 are the concentration and volume of the first solution (6.0 M H2SO4), M2 and V2 are the concentration and volume of the second solution (1.0 M H2SO4), and M3 and V3 are the concentration and volume of the final solution (3.0 M H2SO4).
Plugging in the values:
(6.0 M) (V1) + (1.0 M) (10 L) = (3.0 M) (20 L)
Simplifying:
6V1 + 10 = 60
6V1 = 50
V1 = 8.3 L
Therefore, we should mix 8.3 L of 6.0 M H2SO4 with 10 L of 1.0 M H2SO4 to make 20 L of 3.0 M H2SO4 upon dilution to volume.
The answer is C) 8.3 L.
Learn more about dilution here:
https://brainly.com/question/28997625
#SPJ11
A) Calculate Kc for the reaction below.I2(g)⇌2I(g)Kp=6.26×10−22 (at 298 K)B) Calculate Kc for the reaction below.CH4(g)+H2O(g)⇌CO(g)+3H2(g)Kp=7.7×1024 (at 298 K)C) Calculate Kc for the reaction below.I2(g)+Cl2(g)⇌2ICl(g)Kp=81.9 (at 298 K)
A) To find Kc, we need to use the relationship Kp = Kc(RT)^(Δn), where Δn is the difference in moles between the products and reactants. For the reaction I2(g)⇌2I(g), Δn = 2 - 1 = 1, since there is one mole of gas on the reactant side and two moles of gas on the product side. Therefore, we have:
Kc = Kp/RT^(Δn)
Kc = (6.26×10^(-22))/(8.314 J/K/mol × 298 K)^(1)
Kc = 2.35×10^(-26)
B) For the reaction CH4(g)+H2O(g)⇌CO(g)+3H2(g), Δn = (1+1) - (1+3) = -2, since there are two moles of gas on the reactant side and four moles of gas on the product side. Therefore, we have:
Kc = Kp/RT^(Δn)
Kc = (7.7×10^(24))/(8.314 J/K/mol × 298 K)^(-2)
Kc = 5.6×10^(5)
C) For the reaction I2(g)+Cl2(g)⇌2ICl(g), Δn = (2+0) - (0+2) = 0, since there are two moles of gas on both the reactant and product sides. Therefore, we have:
Kc = Kp/RT^(Δn)
Kc = 81.9/((8.314 J/K/mol × 298 K)^(0))
Kc = 81.9
Learn more about Kc for the reaction here:
https://brainly.com/question/21406244
#SPJ11
a volume of 3.0 l of air at 36°c is expelled from the lungs into cold surroundings at 1.6°c. what volume (in l) does the expelled air occupy at this temperature?
So, the volume of the expelled air at 1.6°C is approximately 2.67 liters.
How to calculate the volume of air at a particular temperature?To calculate the volume of the expelled air at 1.6°C, we can use Charles' Law, which states that the volume of a gas is directly proportional to its temperature, provided that the pressure and the amount of gas remain constant. The formula for Charles' Law is:
V1/T1 = V2/T2
where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume, and T2 is the final temperature. In this case:
V1 = 3.0 L
T1 = 36°C + 273.15 = 309.15 K (convert to Kelvin)
V2 = ? (we need to find this)
T2 = 1.6°C + 273.15 = 274.75 K (convert to Kelvin)
Now, we can rearrange the formula and solve for V2:
V2 = V1 * (T2/T1)
V2 = 3.0 L * (274.75 K / 309.15 K)
V2 ≈ 2.67 L
To know more about Charles Law:
https://brainly.com/question/22172610
#SPJ11