Answer:
Suppression
Explanation:
suppression is used to reduce pest populations below the economic threshold if prevention and avoidance tactics have failed--chemical, bio and cultural and other tactics are used which minimize environmental impacts
Answer:
i know im late again but its suppression
Explanation:
Which substances are compounds? Please help
Answer:
1 and 3
Explanation:
oh this one lol,, hope it helps
Answer:
1 and 3
Explanation:
hope this helps :)
A pool float was filled with air to capacity in the middle of a hot day. The next morning the pool float looked different yet no gas escaped or entered the float. Describe what you think the float looked like in the morning and why it occurred.
Answer:
The pool float looked would have looked deflated the next morning.
Explanation:
When temperature decreases the volume decreases
Answer:
The pool float most likely looked a little deflated or pushed in
Explanation:
The pool float most likely looked a little deflated or pushed in. This is because during the night temperatures most likely dropped. These cold temperatures during the night would have caused the air molecules inside the pool float to come closer together which would cause there to be more excess space inside the pool float. Therefore, allowing it to collapse into itself. This would be far worse if the float was filled with helium or another gas other than O2.
What is the empirical formula for a compound that has 1.5 moles of copper and 0.5 moles of phosphorus?
Answer:
[tex]Cu_{3}P[/tex]
Explanation:
usually, the first step is to calculate the moles but since that is already given in the question we can move onto the next step
least molar ratio:
Cu = [tex]\frac{1.5}{0.5}[/tex] = 3
P = [tex]\frac{0.5}{0.5}[/tex] = 1
thus, empirical formula = [tex]Cu_{3}P[/tex]
The empirical formula for a compound that has 1.5 moles of copper and 0.5 moles of phosphorus is Cu₃P.
What is the empirical formula?Empirical formula of any compound gives idea about the number of constituents particles present in that compound by mentioning the ration.
In the question, given that:
Moles of copper = 1.5 moles
Moles of phophorous = 0.5 moles
Now we divide the given moles by the smallest number to get the ration number as follow:
Cu : P
1.5/0.5 : 0.5/0.5
3 : 1
Hence, required empirical formula is Cu₃P.
To know more about empirical formula, visit the below link:
https://brainly.com/question/1603500
Define what natural gas is, explain how it forms, and
what it is used for today.
Answer:
is a naturally occurring hydrocarbon gas mixture consisting primarily of methane, but commonly including varying amounts of other higher alkanes, and sometimes a small percentage of carbon dioxide, nitrogen, hydrogen sulfide, or helium.
It is formed when layers of decomposing plant and animal matter are exposed to intense heat and pressure under the surface of the Earth over millions of years. The energy that the plants originally obtained from the sun is stored in the form of chemical bonds in the gas
for heating, cooking, and electricity generation. It is also used as a fuel for vehicles and as a chemical feedstock in the manufacture of plastics and other commercially important organic chemicals.
Haley has been having difficulty breathing. She is having difficulty with the gas exchange in the respiratory system. Which organ is being affected?
Answer:
Lungs.
Explanation:
This is because the lungs are respiratory organs in the body that are located at the either side of the thorax or chest. These are organs that are incharge of exchange of gases. The air is breathe in through the trachea i.e oxygen is inhaled and carbondioxide which is the waste product is exhaled. Gas exchange take place in the lungs.
Nate measured an iron bar. He put the iron bar in the hot sun. When he measured the bar after it had been in the sun, it was slightly longer. Which sentence best describes what happened to the iron atoms after the bar was left in the hot sun?
Consider what happens to an iron bar when left out and exposed to sunlight and why it happens.
Evaluate the statements and select the one that best represents what happens.
Provide your reasoning in the text box provided.
The number of atoms increased.
The size of the atoms increased.
The space between each atom increased.
The air in the spaces between the iron atoms expanded.
Answer:
need dim points back ma boi
Explanation:
What is the normality of a 2.0 M NaOH solution?
Answer:
Normality= molarityX total POSITIVE oxidation number of solute Solvent=substance present in the greatest amount Solute= all other substances in the solution +1 (1 na+) is the total POSITIVE oxidation number of NaOH 2.0X1= 2.0 N=2.0
Explanation:
I had the same question on one of my assignments earlier
What will the nervous system feedback do when the human body's temperature drops just below its normal range? Plssss help
Answer:
Homeostasis
Explanation:
The blood vessels constrict and you start to shiver, that shivering generates heat to warm the body to help to body temperature go back to normal. Homeostasis is the condition of keeping your body at a normal condition.
what is molarity ? also write its formula ?
Answer:
Definition:
Molarity of a given solution is defined as the total number of moles of solute per litre of solution. The molality of a solution is dependent on the changes in physical properties of the system such as pressure and temperature as unlike mass, the volume of the system changes with the change in physical conditions of the system. Molarity is represented by M, which is termed as molar. One molar is the molarity of a solution where one gram of solute is dissolved in a litre of solution. As we know, in a solution, the solvent and solute blend to form a solution, hence, the total volume of the solution is taken.
Formula :
[tex]m \: = \frac{n}{v} [/tex]
Where,
m = molar concentration
n = moles of solute
v = litres of solution.
What happens to food we eat?
Answer:
It goes through our digestive system then though our bladder.
Answer: When we eat the food gets digested.
Explanation: Once filled with food, the stomach grinds and churns the food to break it down into small particles. It then pushes the small particles of food into the first part of the small intestine, called the duodenum. The small intestine is where most of the digestion and absorption of our food takes place.
Calculate the molar mass of HCI.
What makes an atom stable?
a. Having the nucleus in the center
b. Being very small
c. Being neutral
d. Having the right number of protons and neutrons
4. What is the volume of 6.5 moles of Helium at STP?
|
Answer:
Volume of 6.5 moles of Helium at STP is 145.6954 L
Explanation:
As we know
[tex]pV = nRT[/tex]
At STP, temperature is 273.15 K and pressure is 1 atm
n is the number of moles which is equal to 6.5
R is the gas constant = 0.08206 L atm/K mol
Substituting the given values in above equation, we get -
[tex]1 * V = 6.5 * 0.08206 * 273.15\\V = 145.6954[/tex]Liters
Volume of 6.5 moles of Helium at STP is 145.6954 L
A car with a mass of 3,500lbs accelerates negatively from 35m/s to 8m/s in 8s. What is the
car's negative acceleration?
Answer:
[tex]a=-3.37\ m/s^2[/tex]
Explanation:
Given that,
A car accelerates negatively from 35m/s to 8m/s in 8s.
We need to find the car's acceleration.
Initial speed, u = 35 m/s
Final speed, v = 8 m/s
Time, t = 8 s
The acceleration of an object is equal to the rate of change of velocity. So,
[tex]a=\dfrac{v-u}{t}[/tex]
Put all the values,
[tex]a=\dfrac{8-35}{8}\\\\a=-3.37\ m/s^2[/tex]
So, the acceleration of the car is equal to [tex]-3.37\ m/s^2[/tex].
Please please help me!! It needs to be turned in in a few minutes!
Answer:
D. Thermal
Thermal is another energy the match gives off
an archer releases an arrow toward a Target the arrow travels 166 m in 2 seconds what is the speed of the arrow
the speed of arrow is 83m/per second
that means
83metres = 1 second
●The arrow would cover the distance of 83 metres in 1 second
may this helps you
bye
What is a peer review? *
A. A summary of results from several different experiments
B. A presentation of scientific ideas
C. group of scientists that analyze scientific experiments
D. The errors in an experiment
Answer: Hewo, there! your Answer is Below
C. group of scientists that analyze scientific experiments
Explanation:
the process of someone reading, checking, and giving his or her opinion about something that has been written by another scientist or expert working in the same subject area, or a piece of work in which this is done: All these papers have been published after being subjected to peer review.
Hope this Helps you !!!
Have a great day!!!
How can sound waves be used to put out fire
PLEASE HELP SOMEONE PLEASEEEE
Answer:
the answer is b
hope this helps you!!
Have a lovely day!
-millie :D
What is the pH of a 0.30 M solution of Ca(OH)2?
Explanation:
30 to the second power
Define the term metal ore
Answer:
Ore is a deposit in Earth's crust of one or more valuable minerals. The most valuable ore deposits contain metals crucial to industry and trade, like copper, gold, and iron
The naturally occurring material from which a mineral or minerals of economic value can be extracted.
Which organisms are consumers?
Select all correct answers.
mushrooms
monkey
grasshopper
bacteria
snake
Answer: snake grass hopper and monkey
Explanation: i took the test and this is what i got
Answer:
snake grasshopper and monkey
Explanation:
2-ciclopropilpropano
Answer:
cool
Explanation:
A flash contains 85.6g of C7H5NO3S (Saccharine) in 2.00 litre of a solution. What is the molarity?
Answer:
0.234 M
Explanation:
C- 12.009 x 7
H- 1.001 x 5
N- 14.006
O- 16 x 3
S- 32.059
___________+
183.133 g/mol
[tex]\frac{1mol}{183.133g} *\frac{85.6g}{2.00L}[/tex] = 0.234 M Cancel out the grams mol/L equals molarity. Lowest significant figure is 3
How many grams of solid iron will be produced from 32.1 grams of iron (III) oxide? Hint: Balance the equation first
Answer:
22.45g of Fe will be produced
Explanation:
The balanced reaction is:
Fe₂O₃(s) + 3CO(g) → 2Fe(s) + 3CO₂(g)
Where 1 mole of Iron (III) oxide reacts with 2 moles of Iron
To solve this question we have to find the moles of iron (III) oxide. With these moles and the balanced reaction we can find the moles of iron produced and its mass:
Moles iron (III) oxide -Molar mass: 159.69g/mol-
32.1g Fe₂O₃ * (1mol / 159.69g) = 0.201 moles Fe₂O₃
Moles Iron:
0.201 moles Fe₂O₃ * (2mol Fe / 1mol Fe₂O₃) = 0.402 moles of Fe
Mass Fe -Molar mass: 55.845g/mol-
0.402 moles of Fe * (55.845g/mol) =
22.45g of Fe will be producedThe characteristics of two unknown intermolecular forces, X and Y, are compared in the table.
Intermolecular Forces
х
Y
Occurs between molecules with instantaneous dipoles Occurs between molecules with permanent dipoles and ions
Which of the following conclusions about the two intermolecular forces is correct?
X represents London dispersion forces, and Y represents ion-dipole forces.
X represents dipole-dipole forces, and Y represents ion-dipole forces.
X represents hydrogen bonding, and Y represents dipole-dipole forces.
X represents London dispersion forces, and Y represents dipole-dipole forces.
Answer:
X represents London dispersion forces, and Y represents ion-dipole forces.
Explanation:
London forces occurs between molecules that are normally non-polar (electrically symmetric). It arises from instantaneous dipoles in molecules. It occurs in all substances.
Permanent dipoles are caused by non-symmetric electron distribution in molecules leading to a permanent dipole in the molecule such as in HCl. Interaction between the permanent dipole in these molecules and an ion is called ion-dipole interaction.
Hence; X represents London dispersion forces, and Y represents ion-dipole forces.
X represents London dispersion forces, and Y represents ion-dipole forces.
London forces:
London forces occurs between molecules that are normally non-polar (electrically symmetric). It arises from instantaneous dipoles in molecules. It occurs in all substances.For example: F₂, I₂Ion-dipole forces:
Permanent dipoles are caused by non-symmetric electron distribution in molecules leading to a permanent dipole in the molecule such as in HCl. Interaction between the permanent dipole in these molecules and an ion is called ion-dipole interaction.For example: sodium ion [tex](Na^+)[/tex]and water molecule[tex](H_2O)[/tex]Hence; X represents London dispersion forces,
and Y represents ion-dipole forces.
Learn more:
brainly.com/question/22602228
You heat 100 mL of water and 1000 mL of water using 40,000 joules of energy. What would be the outcome of this experiment? *
A. The 100 mL of water would be a higher temperature than the 1,000 mL of water.
B. The 100 mL of water would be a lower temperature than the 1,000 mL of water.
C. They would both be the same temperature.
D. There is not enough information
Answer:
A. The 100 mL of water would be a higher temperature than the 1,000 mL of water.
Explanation:
Since the volume of water affects temperature, when the volume increases this results in a lower temperature. This means that the water with the smaller volume will have a higher temperature.
i need help in this can someone help
Answer:
the limiting reagent is butane
Explanation:
5C₄H₁₀ + 25O₂ → 20CO₂ + 5H₂0
A teacher reacts 84.0 g of sodium bicarbonate with excess hydrochloric acid. What is the percent yield for sodium chloride if 56.0 g of sodium chloride is produced?
4.20%
8.01%
92.0%
95.8%
95.8% is the percent yield for sodium chloride if 56.0 g of sodium chloride is produced in the reaction.
How we calculate the percentage yield?Percentage yield of any chemical reaction can be calculated as:
% yield = (Experimental yield/Theoretical yield) × 100
Given chemical reaction is:
NaHCO₃ + HCl → NaCl + CO₂ + H₂O
In the question it is given that 56 grams of NaCl is produced by mass. But according to the stoichiometry of the reaction 1 mole of NaCl will be produced whose mass should be 58.44 grams. So, % yield will be:
% yield = (56/58.44) × 100 = 95.8%
Hence, option (d) is correct it means 95.8% is the percent yield.
To know more about percent yield, visit the below link:
https://brainly.com/question/8638404
6. Find the number of molecules in 33.6 L of co, at STP? What is the name
of this compound?
!!!!!!PLEASE HELP!!!!!!!!!!