Answer:
Explanation:
is the
Plss Guyss I need ur helpp ?? Ill give u brainilist and 35 points ...
A chemical reaction is taking place between two reactants dissolved in a liter of water. If an additional liter of pure water is added to the reaction mixture, what will be the effect on the reaction rate? Explain
Answer:
The chemical reaction rate will have a effect that which two reactants disolve in liter so if pure water is added it will still have the same reaction but lighter
Explanation:
#keep on learning
which one of these three elements conatain the most protons
A.copper
B. radon
C. sodium
Answer:
i think it's B sorry if i'm wrong
If I have 4.4 moles of nitrous oxide (laughing gas) that is kept at 32.9 °C in a container under 1.6 atm, what is the volume of the container? (R = 0.0821 (L*atm)/(mol*K))
Round your answer to 1 decimal place.
Answer:
Explanation:
Using the ideal gas equation as follows:
PV = nRT
Where:
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
Based on the information provided in this question;
P = 1.6atm
n = 4.4 moles
R = 0.0821 L*atm/mol*K
T = 32.9°C = 32.9 + 273 = 305.9K
V = ?
Can someone please explain this to me t,t
I could do the second part if i just understood the first-
Answer:
Theoretical 32.04 g
The precent yeild 87. 39 %
Explanation:
Mole of H2 = m/mw = 4/2 = 2 mol
From the equation
1 mol H2 --> 1/2 mol CH3OH
2 mol H2 -->??
So we have 1 mol Ch3oh
Mass of Ch3oh = mole *Mw = 1* 32.04
= 32.04g >>> the theoretically
For percent yeild = actual / theoretical * 100%
( 28.0/32.04) *100% =
87.93%
How many moles of Chlorine gas are required to produce 5.35 moles of NaCl in this
reaction?
Answer:
2.675 moles of Chlorine gas are required
Explanation:
Chlorine gas, Cl2, reacts with NaBr to produce NaCl and Br2 as follows:
Cl2 + 2NaBr → 2NaCl + Br2
Where 1 mole of chlorine gas produce 2 moles of NaCl
Thus, to produce 5.35 moles of NaCl are required:
5.35mol NaCl * (1mol Cl2 / 2mol NaCl) =
2.675 moles of Chlorine gas are requiredOne of the reasons that solid CuSO4 dissolves in water is: a instantaneous dipole-induced dipole forces (dispersion or London forces) between the Cu2 and the SO42- ions b the ion-dipole forces between the ions and the water molecules c the electrostatic force of attraction between the Cu2 and the SO42- ions d the hydrogen bonding between the water molecules e instantaneous dipole-induced dipole forces (dispersion or London forces) between the water molecules
Answer:
the ion-dipole forces between the ions and the water molecules
Explanation:
Water is a polar molecule having a high dipole moment. This high polarity makes it a popular choice of polar solvent.
CuSO4 is an ionic compound composed of Cu^2+ and SO4^2-. When dissolved in water, the positive dipole in water interacts with the negative ion while the negative dipole in water interacts with the positive ion thereby causing the compound(CuSO4 ) to dissolve in water due to the ion-dipole forces between the ions and the water molecules.
This unknown element could most likely be a part of which of the following
familles?
A Alkall metals
B Alkaline earth metals
C Halogens
D Noble Gases
Answer:
halogen
Explanation:
because the lewis dot structure shows 7 dots which means 7 valence electron. halohe falls on group 17 or7A having 7 valence electron
How do fossils evidence help you put the landmasses together
Explanation:
Alfred wegener collected pieces of evidence to support his theory having to do with geological "fit" and fossil evidence. This means that these extensive oceans between these land masses act as a type of barrier for fossil transfer.
Adding energy to an endothermic reaction will push the reaction towards...
A. Will have no effect
B. Products
C. Reactants
thank you :)
Answer:
Products
Explanation:
In an endothermic reaction, energy is taken in. This means that the absorption of energy favours the forward reaction.
Hence for a process; A + B----> C, if energy must be added for the equilibrium to shift towards the right and more of C is produced, then the reaction is endothermic.
What is the molarity of 2.5 mol NaOH in a 1.0 L solution?
Answer:
0.0015 M
Explanation:
we know, M = n/V = 2.5/1000 = 0.0015 M
Determine the percent yield if 0.0419 mol of ethyl acetate is produced but 0.0722 mol is calculated as the theoretical yield?
what is the method use to separate sand and water
Sand and water can be separated by any of the following methods:
1. Sedimentation and decantation: This method involves the mixture being kept undisturbed for some time. After some time, sand being heavier and insoluble in water, settles down at the bottom of container. Now, water is poured into another container to separate it from sand.
2. Filtration: This method involves the mixture being passed through a filter paper (a filter with very fine pores). Sand particles being larger in size are retained by the filter paper and get separated from water.
I hope this helps! :D
What is the mass of a sample of NH3 containing 3.80 x 1024 molecules of NH3? (5 points)
74.8 grams
107 grams
89.4 grams
101 grams
Answer: 107 grams
Explanation: got it right on the test
The mass of a sample of f NH₃ containing 3.80 x 10²⁴ molecules of NH₃ is 107.27 grams.
What is a molecule?A molecule is a group of two or more atoms that form the smallest identifiable unit into which a pure substance can be divided and still retain the composition and chemical properties of that substance.
6.02214076 × 10²³ molecules constitute 1 mole of NH₃
3.80 x 10²⁴ molecules constitutes of = 6.31 moles
1 mole of NH₃ = 17 gm
11.19 mole will be = 17 X 6.31
= 107.27 grams
Therefore the mass of a sample of NH₃ containing 3.80 x 10²⁴ molecules of NH₃ is 107.27 grams.
Learn more about molecules here:
brainly.com/question/19922822
#SPJ2
(2-2) Looking at the chemical formula CaF2 (calcium fluoride), what do you think this substance is made of? (Choose ALL that apply)
Metal
Metalloid
Non-metal
Answer:
Metal
Non-metal
Explanation:
CaF2 is an ionic compound. Ionic compounds are mostly composed of a metal and a non metal. Metals donate electrons to non-metals to form ionic compounds.
Calcium is a divalent ion of group two in the periodic table while F is a univalent nonmetal of group 17 in the periodic table. Hence the compound CaF2 is composed of a metal and a nonmetal.
Can someone please help me pls
Answer:
I guess option d
hope I am correct
What is the hottest place on the planet?
Answer:
Death Valley in California U.S. is the hottest place in the world
6. Changes in the rate of chemical reactions depend on what conditions?
Answer:
temperature, concentration, pressure
Ions Types of Ions Cation Anion 1. H+ 2.O-2 3.Ba2+ 4.Br- 5.Hg2+ 6.Li+ 7.Ca2+ 8.F- 9.S-2 10.Fe3+
Explanation:
The species with a positive charge over it, which means lack of electrons are called cations. Whereas the species with negative over it, meaning it has an excess of electrons with it are called anions.
From the list given the cations are
H+, Ba2+, Hg2+, Li+, Ca2+ and Fe2+
Whereas anions from the list are
O-2, Br-5, F-, S-2.
A Combination of cation and anions make an ionic compound in which cation is written first and then anion.
Nitrogen-13 emits beta radiation and decays to carbon-13 with a half life of 10
minutes. Assume a starting mass of 2.00 g of nitrogen-13.
(Use to answer the questions below.)
How long is three half-lives in the example above? *
Answer:
From the Question....
A half life is 10minutes...
3half lives would be a total of 30minutes.
HELP ME PLEASE
IM LITERALLY FAILING
Which of the following is not a component of cell theory?
a. Cells can be generated by element condensation in water vapor.
b. All organisms are made of one or more cells.
c. Cells are basic building blocks of all life.
d. Cells must come from pre-existing cells.
Answer:
A
Explanation:
Definitely not in the cell theory
the molar mass of CCI2F2
Answer:
The molar mass and molecular weight of CCI2F2 is 315.8271.
Explanation:
Base your answer on the information below. Some carbonated beverages are made by forcing carbon dioxide gas into a beverage solution. When a bottle of one kind of carbonated beverage is first opened, the beverage has a pH value of 3. After the beverage bottle is left open for an hour, the hydronium ion concentration in the beverage solution decreases by 10 times of the original concentration. Determine the new pH of the beverage solution.
The question is incomplete, the complete question is;
Some carbonated beverages are made by forcing carbon dioxide gas into a beverage solution. When a bottle
of one kind of carbonated beverage is first opened, the beverage has a pH value of 3.
After the beverage bottle is left open for several hours, the hydronium ion concentration in the beverage
solution decreases to 1/1000 of the original concentration. Determine the new pH of the beverage solution.
Answer:
6
Explanation:
Recall that
pH= -log[H3O^+]
Hence, [H^+] when the drink was first opened;
3 = -log[H^3O+]
[H^+] = Antilog(-3)
[H30^+] = 1 * 10^-3
Since [H3O^+] decreases to 1/1000 times its original value;
New [H3O^+] = 1 * 10^-3 * 1/1000 = 1 * 10^-6
Hence,
New pH = -log[1 * 10^-6]
New pH = 6
At which position in its orbit was the Moon located during the 2015 supermoon total lunar eclipse?
The moon was located at position C in its orbit during the 2015 supermoon total lunar eclipse.
What is a supermoon lunar eclipse?A supermoon can be described as a full moon that nearly coincides with perigee which is the closest that the Moon comes to the Earth in its elliptic orbit as results in a slightly larger-than-usual apparent size of the lunar disk can be viewed from the earth.
Perigee syzygy is the technical name of the Earth-Moon-Sun system or a full Moon around perigee. The association of the Moon with oceanic and crustal tides claims that the supermoon phenomenon can be associated with an increased risk of events such as volcanic eruptions and earthquakes, but no such connection has been found.
In the 21st century, there are 87 lunar eclipses in total, of which 6 are micro moons and 28 are supermoons. A supermoon lunar eclipse was seen in the September 2015 lunar eclipse.
Learn more about lunar eclipse, here:
https://brainly.com/question/12075389
#SPJ2
A gas has a pressure of 6.5 atm at 540 K. What will the pressure be at 210 K if the volume does not change
Answer:
The pressure at 210 K will be 2.53 atm.
Explanation:
Gay-Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.
This law mathematically indicates that the quotient between pressure and temperature is constant:
[tex]\frac{P}{T} =k[/tex]
You want to study two different states, an initial state and a final state. You have a gas that is at a pressure P1 and at a temperature T1 at the beginning of the experiment. By varying the temperature to a new value T2, then the pressure will change to P2, and the following will be fulfilled:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 6.5 atmT1= 540 KP2= ?T2= 210 KReplacing:
[tex]\frac{6.5 atm}{540 K} =\frac{P2}{210 K}[/tex]
Solving:
[tex]P2=210 K*\frac{6.5 atm}{540 K}[/tex]
P2=2.53 atm
The pressure at 210 K will be 2.53 atm.
How many atoms of Neon are in 65.0 L of Neon gas?
Answer:
65.0 g NH3 x
mol NH3
17.04 g NH3
x
6.02x1023 NH3 molecules
mol NH3
= 2.30x1024 NH3 molecules
(have uh good day)
Answer:
mole of Neon = 65L/22.4L
=2.901moles of Neon
1 mole of a substance contains 6.022x10^23atoms
So 2.901moles will contains
2.901 x 6.022x10^23atoms
=1.747 x 10^24atoms
A physics experiment is conducted at a pressure of 14.0 kPa. What is this pressure in mmHg?
Answer:
18.4 mmHg. The answer is 18.4 mmHg.
does it have any difference between atomic mass and mass number
Answer:
Atomic mass is the weighted average mass of an atom of an element based on the relative natural abundance of that element's isotopes. The mass number is a count of the total number of protons and neutrons in an atom's nucleus.
Answer:
Atomic mass is the weighted average mass of atom of an element based on the relative abundance of the element's isotopes. The mass number is a count of total number of protons and neutrons in an atom's nucles
what does LUCA stand for
¿por qué la teoría de Demócrito fue reemplazada por la teoría de Dalton y luego esta teoría fue reemplazada por por Rutherford.?
Answer:
Debido al descubrimiento de protones, neutrones y electrones.
Explicación:
La teoría de Demócrito fue reemplazada por la teoría de Dalton y luego la teoría de Dalton fue reemplazada por la de Rutherford debido al descubrimiento de protones, neutrones y electrones que están presentes dentro del átomo. Demócrito afirma que el átomo es una partícula indivisible de materia, pero el descubrimiento del protón, el neutrón y el electrón cambió este concepto de átomo, por lo que debido al mayor descubrimiento y estudio del átomo y sus partículas subatómicas, las teorías cambiaron con el paso del tiempo.
11. Which do you think is more important in forming personality---environment or heredity? Explain your answer.
Answer:
I believe forming an environmental personality is more important than forming a hereditary personality. Why I said this is because of the people around out can change your personality, and sometimes if you're with the wrong people, it can go wrong, with your personality too. You could have been a nice person at some time, you bur you hung out with the wrong people and now you're just very inconsiderate. Another reason on why I believe forming an environmental personality is more important because of the fact that maybe you could've been born with a parent who has a bad personality. You could try your best to be nicer by the choice of people you choose to be friends with.
Explanation:
i hope this helped, im only in 7th