7. comment on the qod for the gas law lab: what effect does the limiting reactant mass have on the molar gas volume? hint: this question is asking about molar gas volume, not simply gas volume. (8pts)

1.03 g of ground cloves and 17 mL of distilled water were added to the completed device shown in the sketch below. Clove oil is called eugenol. Its boiling point is 248 degrees Celsius.

The oil present in cloves, eugenol, has a boiling point of 248 °C; however, by performing a co-distillation with water, sometimes referred to as a steam distillation, it can be isolated at a lower temperature.The distillation apparatus, often known as a "still," is made up of a container for the plant material and water, a condenser to cool and condense the created vapour, and a receiving mechanism. The required plant material for extraction is submerged in water in the distillation tank.

To know more about eugenol, click here:

https://brainly.com/question/29756034

#SPJ4

The isoline indicated on this weather map is an isobar.

The high-pressure area is located in a region of relatively high pressure.

In a high-pressure area, the weather is typically fair and dry, with clear skies and little or no precipitation.

High-pressure systems are associated with sinking air, which tends to suppress cloud formation and precipitation. The sinking air also leads to increased atmospheric stability, which further inhibits cloud formation and precipitation. An isobar is a line connecting points of equal atmospheric pressure on a weather map.

In a high-pressure area, the atmospheric pressure is relatively high compared to the surrounding areas, and the isobars are closely spaced together. This indicates a steep pressure gradient and strong pressure gradient force. The clockwise rotation of air around a high-pressure area in the Northern Hemisphere also leads to the formation of clear skies and dry weather conditions. The sinking air associated with the high-pressure system suppresses cloud formation and precipitation, resulting in sunny and dry weather conditions.

To know more about the Weather map, here

https://brainly.com/question/30260238

#SPJ1

Answer:

1. Isobar

2. 1024 mb

3. sunny weather

Explanation:

I did it on edge

For an electron with orbital angular momentum quantum number (l) equal to 5, the possible distinct angles from the vertical axis that the orbital angular momentum vector can make are determined by the magnetic quantum number (m_l).

The orbital angular momentum vector of an electron is given by the equation L = (nh/2π)√(l(l+1)), where n is the principal quantum number, h is Planck's constant, and l is the angular momentum quantum number.

For an electron with n = 5, the maximum value of l is 4 (since l must be less than n). Therefore, the possible values of l for this electron are 0, 1, 2, 3, and 4.

The number of distinct angles that the orbital angular momentum vector can make from the vertical axis is equal to the number of values of l. Therefore, for an electron with n = 5, there are 5 distinct angles that the orbital angular momentum vector can make from the vertical axis.

Learn more about electron here: brainly.com/question/28977387

#SPJ11

The mL of a 0.150 M Ca(OH)₂ solution required to titrate a 200.0 mL of a 0.060 M HCl solution to its equivalence point is 40.0 mL.

The balanced chemical equation for the reaction between Ca(OH)₂ and HCl is:

Ca(OH)₂(aq) + 2HCl(aq) → CaCl₂(aq) + 2H₂O(l)

From the equation, we can see that 1 mole of Ca(OH)₂ reacts with 2 moles of HCl. Therefore, the number of moles of HCl in the 200.0 mL of 0.060 M HCl solution is:

n(HCl) = M(HCl) x V(HCl) = 0.060 mol/L x 0.2000 L = 0.0120 mol

Since 1 mole of Ca(OH)₂ reacts with 2 moles of HCl, the number of moles of Ca(OH)2 required to react with the HCl is:

n(Ca(OH)₂) = 1/2 x n(HCl) = 1/2 x 0.0120 mol = 0.0060 mol

The concentration of the Ca(OH)₂ solution is 0.150 M, so the volume of Ca(OH)₂ solution required to provide 0.0060 mol of Ca(OH)₂ is:

V(Ca(OH)₂) = n(Ca(OH)₂) / M(Ca(OH)₂) = 0.0060 mol / 0.150 mol/L = 0.0400 L = 40.0 mL

Therefore, 40.0 mL of the 0.150 M Ca(OH)₂ solution is required to titrate the 200.0 mL of 0.060 M HCl solution to its equivalence point.

To know more about the Equivalence point, here

https://brainly.com/question/13166362

#SPJ4

The moles of benzoic acid (C6H5COOH) actually produced in the experiment is 0.1498 mol.

To determine the moles of benzoic acid produced, we need to first find the molar mass of benzoic acid.

Molar mass of C = 12 g/mol
Molar mass of H = 1 g/mol
Molar mass of O = 16 g/mol

From the chemical formula of benzoic acid, we can see that it contains 7 carbon atoms, 6 hydrogen atoms, and 2 oxygen atoms. Molar mass is the sum of the molar masses of its constituent atoms. Therefore, its molar mass is:

(7 * 12 g/mol) + (6 * 1 g/mol) + (2 * 16 g/mol) = 84 + 6 + 32 = 122 g/mol

Given that the product mass is 18.28 g, we can now calculate the moles of benzoic acid produced:

Moles of benzoic acid = Product mass / Molar mass = 18.28 g / 122 g/mol = 0.1498 mol

So, 0.1498 moles of benzoic acid were actually produced in the experiment.

Learn more about Molar mass: https://brainly.com/question/837939

#SPJ11

Before the addition of KOH, the HBr is in excess, so we can assume all of it is still present in solution. The moles of HBr present in the solution are:

moles HBr = (0.15 mol/L) x (50.0 mL/1000 mL/L) = 0.0075 mol

When 16.0 mL of 0.25 M KOH is added, the moles of KOH added are:

moles KOH = (0.25 mol/L) x (16.0 mL/1000 mL/L) = 0.004 mol

Since KOH is a strong base, it will fully dissociate in solution to form K+ and OH-. The OH- will react with the H+ from the HBr to form water. The moles of H+ that react with the added KOH are equal to the moles of KOH added, because HBr and KOH react in a 1:1 ratio.

moles H+ = 0.004 mol

The initial moles of HBr were 0.0075 mol, so the moles of H+ remaining in solution after the titration are:

moles H+ remaining = 0.0075 mol - 0.004 mol = 0.0035 mol

The volume of the final solution is 50.0 mL + 16.0 mL = 66.0 mL, or 0.0660 L. The concentration of H+ in the final solution is:

[H+] = moles H+ remaining / volume of solution = 0.0035 mol / 0.0660 L = 0.0530 M

Taking the negative logarithm of the [H+] gives us the pH:

pH = -log [H+] = -log (0.0530) = 1.28

Therefore, the pH after the addition of 16.0 mL of KOH is 1.28.

Before any HNO3 is added, the NH3 is in excess, so we can assume all of it is still present in solution. The moles of NH3 present in the solution are:

moles NH3 = (0.200 mol/L) x (75.0 mL/1000 mL/L) = 0.015 mol

When 13.0 mL of 0.500 M HNO3 is added, the moles of HNO3 added are:

moles HNO3 = (0.500 mol/L) x (13.0 mL/1000 mL/L) = 0.0065 mol

HNO3 is a strong acid, so it will fully dissociate in solution to form H+ and NO3-. The H+ will react with the NH3 to form NH4+. The moles of H+ that react with the added HNO3 are equal to the moles of HNO3 added, because NH3 and HNO3 react in a 1:1 ratio.

moles H+ = 0.0065 mol

The initial moles of NH3 were 0.015 mol, so the moles of NH3 remaining in solution after the titration are:

moles NH3 remaining = 0.015 mol - 0.0065 mol = 0.0085 mol

The volume of the final solution is 75.0 mL + 13.0 mL = 88.0 mL, or 0.0880 L. The concentration of NH4+ in the final solution is:

[NH4+] = moles NH4+ / volume of solution = 0.0065 mol / 0.088

Visit here to learn more about dissociate brainly.com/question/30961097

#SPJ11

The [OH⁻] for a 0.049 m solution of Sr(OH)₂ is 0.098 M.

This is because each formula unit of Sr(OH)₂ dissociates into two OH⁻ ions, so the concentration of OH⁻ ions is twice the molarity of the solution. To find the molarity of OH⁻, simply multiply the molarity of Sr(OH)₂ by 2.

In other words, when Sr(OH)₂ dissolves in water, it breaks up into Sr²⁺ ions and two OH⁻ ions. Since there is only one Sr(OH)₂ formula unit for every three ions produced (one Sr²⁺ ion and two OH⁻ ions), the concentration of OH⁻ ions is twice that of the Sr(OH)₂ concentration. Thus, the [OH⁻] for a 0.049 m solution of Sr(OH)₂ is 0.098 M.

To know more about molarity click on below link:

https://brainly.com/question/8732513#

#SPJ11

To calculate the pOH and pH of a 1.25 M LiOH solution at 25°C, we need to use the following equations:

pOH = -log[OH-]

pH + pOH = 14

First, we need to find the concentration of hydroxide ions [OH-] in the solution.

LiOH is a strong base, meaning it completely dissociates in water to form Li+ and OH- ions:

LiOH → Li+ + OH-

So, the concentration of [OH-] in a 1.25 M LiOH solution is also 1.25 M.

Using the pOH equation, we can calculate:

pOH = -log (1.25)

        = 0.9031

Next, we can use the pH equation to find pH:

pH + pOH = 14
pH + 0.9031 = 14

pH = 13.0969

Therefore, the pOH of a 1.25 M LiOH solution at 25°C is 0.9031, and the pH is 13.0969.

https://brainly.com/question/31485772

#SPJ11

The balanced equation for the combustion of isopropyl alcohol is:
(CH₃)₂CHOH + 5O₂ → 3CO₂ + 4H₂O

To balance the combustion equation for isopropyl alcohol ((CH₃)₂CHOH), you need to consider the reactants and products involved in the reaction. The reactants are isopropyl alcohol and oxygen (O₂), while the products are carbon dioxide (CO₂) and water (H₂O). The balanced equation is:
(CH₃)₂CHOH + 5O₂ → 3CO₂ + 4H₂O

This means that for every one molecule of isopropyl alcohol ((CH₃)₂CHOH), five molecules of oxygen (O₂) are required to produce three molecules of carbon dioxide (CO₂) and four molecules of water (H₂O). It is important to note that this reaction represents complete combustion, meaning that all of the fuel is burned and converted into products.

Learn more about balanced equation here: https://brainly.com/question/26694427

#SPJ11

In this case, absorbance of final solution of batch B is higher than that of batch A. This means that batch B contains a higher concentration of salicylic acid than batch A, indicating that batch A is purer than batch B. Purity can be determined by comparing the absorbance of final solutions.

The purity of a substance can be determined by comparing the absorbance of its final solution to that of a standard solution of the same substance.

In this case, since the absorbance of both samples falls within the range of the salicylic acid standard solutions, we can conclude that both batches contain salicylic acid.

However, the difference in absorbance between the two samples indicates that there is a difference in the concentration of salicylic acid in each batch.

It is important to note that the purity of a substance cannot be determined solely by its weight, as other impurities may be present in the sample. Therefore, using a spectrophotometer to measure absorbance can be a useful tool for determining the purity of a substance.

Know more about spectrophotometer here:

https://brainly.com/question/30724865

#SPJ11

The chemical that would form the least acidic aqueous solution is HF (hydrofluoric acid).

Acidity depends on the strength of an acid, which is determined by its ability to dissociate in water to produce H+ ions. Among the given options (HI, HBr, HCl, and HF), hydrofluoric acid (HF) is the weakest acid.

This is because fluorine is more electronegative than other halogens, which results in a stronger bond with hydrogen, making it harder for HF to dissociate into H+ and F- ions in water. As a result, HF forms a less acidic aqueous solution compared to HI, HBr, and HCl.

To know more about electronegative click on below link:

https://brainly.com/question/17762711#

#SPJ11

The chemical that would form the least acidic aqueous solution is HF (hydrofluoric acid).

Acidity depends on the strength of an acid, which is determined by its ability to dissociate in water to produce H+ ions. Among the given options (HI, HBr, HCl, and HF), hydrofluoric acid (HF) is the weakest acid.

This is because fluorine is more electronegative than other halogens, which results in a stronger bond with hydrogen, making it harder for HF to dissociate into H+ and F- ions in water. As a result, HF forms a less acidic aqueous solution compared to HI, HBr, and HCl.

To know more about electronegative click on below link:

https://brainly.com/question/17762711#

#SPJ11

Option A. When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase.

When a can of soda is moved from room temperature into a fridge, the solubility of carbon dioxide inside the beverage will increase. This is because cooler temperatures generally increase the solubility of gases in liquids, allowing more carbon dioxide to dissolve into the beverage.

When you put your Soda can or bottle of Soda into the fridge, it will go flat faster than if you had left it out on the counter. This is because cold temperatures cause carbonation to escape more quickly from a beverage. This can happen when there are small holes in the bottom of an aluminum container.

Know more about  solubility - brainly.com/question/9098308

#SPJ11

The mass of PbI2 produced is 105 g (to three significant digits).

The mole ratio of KI to PbI2 in the balanced chemical equation is 2:1.

The molar mass of PbI2 is 461.01 g/mol.

To solve this problem, we need to use stoichiometry to convert the given number of moles of KI to the mass of PbI2 produced.

From the balanced chemical equation, we can see that 2 moles of KI react with 1 mole of Pb(NO3)2 to produce 1 mole of PbI2. Therefore, the mole ratio of KI to PbI2 is 2:1.

We can use this ratio to calculate the number of moles of PbI2 produced:

0.455 moles KI x (1 mole PbI2 / 2 moles KI) = 0.228 moles PbI2

Next, we can use the molar mass of PbI2 to convert moles to grams:

0.228 moles PbI2 x 461.01 g/mol = 105.19 g PbI2

Learn more about mole ratio here:

https://brainly.com/question/15288923

#SPJ1

The mass of PbI2 produced is 105 g (to three significant digits).

The mole ratio of KI to PbI2 in the balanced chemical equation is 2:1.

The molar mass of PbI2 is 461.01 g/mol.

To solve this problem, we need to use stoichiometry to convert the given number of moles of KI to the mass of PbI2 produced.

From the balanced chemical equation, we can see that 2 moles of KI react with 1 mole of Pb(NO3)2 to produce 1 mole of PbI2. Therefore, the mole ratio of KI to PbI2 is 2:1.

We can use this ratio to calculate the number of moles of PbI2 produced:

0.455 moles KI x (1 mole PbI2 / 2 moles KI) = 0.228 moles PbI2

Next, we can use the molar mass of PbI2 to convert moles to grams:

0.228 moles PbI2 x 461.01 g/mol = 105.19 g PbI2

Learn more about mole ratio here:

https://brainly.com/question/15288923

#SPJ1

we need to use the balanced chemical equation for the decomposition of SbCl5: Therefore, you need to add 0.05955 moles of chlorine gas to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration.

SbCl5 (g) ⇌ SbCl3 (g) + Cl2 (g)
equilibrium concentrations given are:
[SbCl5] = 0.0293 M
[SbCl3] = [Cl2] = 0.00794 M
We want to find the number of moles of Cl2 that must be added to the container to make the new equilibrium concentration of SbCl3 to be half that of the original equilibrium concentration.
Let's call the new equilibrium concentration of SbCl3 "x" M. Since the volume of the container is constant at 15.00 L, we can use the equilibrium expression to set up an equation and solve for x:
Kc = [SbCl3][Cl2]/[SbCl5]
Kc = (0.00794)(0.00794)/(0.0293) = 0.001706 M
0.001706 = x(0.00794-x)/(0.0293+x)
Simplifying this equation and solving for x, we get:
x = 0.002296 M
This is half of the original equilibrium concentration of SbCl3, which was 0.00794 M. So, we need to add enough Cl2 to increase the concentration from 0.00794 M to 0.002296 M.
The change in concentration of Cl2 is:
Δ[Cl2] = x - [Cl2] = 0.002296 - 0.00794 = -0.005644 M
This means we need to remove 0.005644 M of Cl2 from the container. Since the volume of the container is 15.00 L, we can use the equation:
moles = concentration × volume
to calculate the number of moles of Cl2 that must be removed:
moles of Cl2 = (0.005644 M) × (15.00 L) = 0.08466 moles
Therefore, we need to remove 0.08466 moles of Cl2 from the container to reach the new equilibrium concentration of SbCl3.

To determine the number of moles of chlorine gas that must be added to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration, follow these steps:
1. Write the balanced equation for the reaction:
SbCl5 (g) ⇌ SbCl3 (g) + Cl2 (g)
2. Given the original equilibrium concentrations:
[SbCl5] = 0.0293 M
[SbCl3] = [Cl2] = 0.00794 M
3. The new equilibrium concentration of SbCl3 (g) should be half the original:
[SbCl3_new] = 0.5 * 0.00794 M = 0.00397 M
4. Since the stoichiometry of SbCl3 and Cl2 in the balanced equation is 1:1, the change in the concentration of Cl2 must be equal to the change in the concentration of SbCl3:
Δ[Cl2] = 0.00397 M
5. Calculate the number of moles of Cl2 to be added to the container:
moles of Cl2 = Δ[Cl2] * volume of container
moles of Cl2 = 0.00397 M * 15.00 L = 0.05955 moles
Therefore, you need to add 0.05955 moles of chlorine gas to the 15.00L container to make the new equilibrium concentration of SbCl3 (g) half that of the original equilibrium concentration.

Visit here to know more about decomposition:

brainly.com/question/8009068

#SPJ11

In the case of hydrogen atoms van der waals interactions  in n=2 states, C6 can be calculated as C6 = (3/2) * h * c * α².

To calculate the van der Waals interactions between two hydrogen atoms in n=2 states, you can use the London dispersion formula, which is given by:

U(r) = -C6/r⁶

Here, U(r) is the van der Waals potential energy, r is the distance between the two atoms, and C6 is the dispersion coefficient.

where h is the Planck's constant, c is the speed of light, and α is the static polarizability of hydrogen in the n=2 state.

Now, to interpret the results, the van der Waals interactions are attractive and depend on the distance between the atoms. At large distances, the interactions become weaker, while at short distances, they become stronger.

These interactions play a significant role in stabilizing molecular structures, particularly in non-polar and weakly polar molecules.

To know more about van der waals interactions click on below link:

https://brainly.com/question/5541979#

#SPJ11

1. Newman projections are used to visualize and analyze the spatial arrangement of atoms and their conformations in a molecule, specifically to represent the different rotational conformations of a single bond.

2. There are two main conformations of cyclohexane: the chair conformation and the boat conformation. However, there are additional conformations, such as twist-boat and half-chair, resulting in a total of four possible conformations.

3. The normal bond angle for a tetrahedral is approximately 109.5 degrees.

4. I do not have a modeling kit. Yes, I am going to purchase one after today to better understand the structures and conformations of molecules in the studies.

https://brainly.com/question/31485794

#SPJ11

Four physical quantities that are conserved during a process include energy, momentum, angular momentum, and electric charge. On the other hand, two quantities that are not conserved during a process are mechanical energy and mass.

Energy conservation states that the total energy of an isolated system remains constant, as energy can neither be created nor destroyed, only converted from one form to another. Momentum conservation asserts that the total momentum of a system remains constant, provided no external forces act on it. Similarly, the conservation of angular momentum dictates that the total angular momentum of an isolated system remains constant if no external torques are applied. Lastly, electric charge conservation states that the net electric charge within an isolated system remains constant, as charges can neither be created nor destroyed, only redistributed or transferred.

Mechanical energy, which comprises kinetic and potential energy, may not be conserved in non-conservative systems, such as those experiencing dissipative forces like friction or air resistance. In these cases, some mechanical energy is lost as thermal energy or other forms of energy. Mass conservation is not always maintained at the subatomic level, particularly during processes like nuclear reactions, where mass can be converted into energy following Einstein's mass-energy equivalence principle, E=mc².

Learn more about mechanical energy at:

https://brainly.com/question/28928306

#SPJ11

The energy change (δe) for the decomposition of hydrogen peroxide: 2 H₂O(g) → 2 H₂O(g) ⁺ O₂(g) is 794 kJ/mol.

To calculate the energy change (δe) for the decomposition of hydrogen peroxide, we first need to calculate the energy required to break the bonds in the reactants and the energy released when the bonds in the products form.

Here are the bond energies of the reactants and products:

To break the bonds in the reactants, we need to break four H-O bonds and one O-O bond, so the total energy required to break the bonds in the reactants is:

4(H-O) + 1(O-O)

= 4(463 kJ/mol) + 498 kJ/mol

= 2218 kJ/mol

To form the bonds in the products, we need to form two H-O bonds and one O=O bond, so the total energy released when the bonds in the products form is:

2(H-O) + 1(O=O)

= 2(463 kJ/mol) + 498 kJ/mol

= 1424 kJ/mol

Therefore, the energy change (δe) for the decomposition of hydrogen peroxide is:

δe = energy required to break bonds in reactants - energy released when bonds in products form

δe = 2218 kJ/mol - 1424 kJ/mol

δe = 794 kJ/mol

So the energy change for the decomposition of hydrogen peroxide is 794 kJ/mol.

Learn more about decomposition of hydrogen peroxide: https://brainly.com/question/18221920

#SPJ11

According to decreasing polarity, the order of the molecules in each set is as follows: PF₃ > PCl > PBr, BF > CF > NF, Te > Se > BrF₃, and so on. The bond's ionic nature (polarity) increases as the electronegativity difference between the atoms increases.

The degree of electronegativity gap between the atoms affects how polar covalent bonds are. The bonds' polarity increases as the difference in electronegativity between the atoms increases. Since fluorine is more electronegative than hydrogen, its p character would be higher in the N-F bond than in the N-H bond. More character also results in wide bond angles. As a result, the bond angle in NH₃ is higher than in NF₃.

To know more about polarity, click here:

https://brainly.com/question/30002497

#SPJ4

Rank the members of each set of compounds according to the ionic character of their bonds. Most ionic bonds?a) PCl3 PBr3 PF3 Most ionic bonds? b) BF3 NF3 CF3 Most ionic bonds? c) SeF4 TeF4 BrF3 Least ionic bonds? d) PCl3 PBr3 PF3 Least ionic bonds?e) BF3 NF3 CF3 Least ionic bonds? f) SeF4 TeF4 BrF3

The electron configuration for platinum (Pt) can be abbreviated using the noble-gas inner core of xenon (Xe) as [Xe] 4f^14 5d^9 6s^1.

To write the electron configuration for the precious metal platinum (Pt), follow these steps:

1. Identify the atomic number of platinum, which is 78.
2. Find the nearest noble gas with an atomic number less than platinum. In this case, it's Xenon (Xe) with an atomic number of 54.
3. Write the electron configuration for Xenon as [Xe].
4. Continue filling the remaining electron orbitals following the Aufbau principle.

To know more about Electron Configuration:

https://brainly.com/question/9508055

#SPJ11

Alcohol activation reagents that help you avoid the formation of carbocations and control the stereochemistry at the carbon attached to the alcohol. Out of the options provided, the following reagents allow you to achieve this: 1.PCl3 ;2. PBr3 3. SOCl2

1. PCl3 (Phosphorus trichloride),2. PBr3 (Phosphorus tribromide),3. SOCl2 (Thionyl chloride) in the presence of pyridine
These reagents are known for converting alcohols into alkyl halides without the formation of carbocations and retaining the stereochemistry at the carbon attached to the alcohol. Pyridine can also be used in combination with either of these reagents to stabilize the oxonium or Lewis acid intermediate. This helps to avoid the formation of carbocations and control the stereochemistry at the carbon attached to the alcohol.

learn more about stereochemistry Refer: https://brainly.com/question/28658912

#SPJ11

The root mean square speed of an oxygen gas molecule (O2) at 35.0 °C is approximately 490.1 m/s.

To calculate the root mean square speed of an oxygen gas molecule (O2) at 35.0 °C, follow these steps:
1. Convert the temperature from Celsius to Kelvin: K = °C + 273.15
  35.0 °C + 273.15 = 308.15 K
2. Use the root mean square speed formula: vrms = √(3RT/M), where vrms is the root mean square speed, R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin, and M is the molar mass of the gas in kg/mol.
3. Convert the molar mass of O2 to kg/mol:
  Molar mass of O2 = 32 g/mol (16 g/mol for each oxygen atom)
  1 g = 0.001 kg, so 32 g/mol = 0.032 kg/mol

4. Plug the values into the formula: vrms = √(3 x 8.314 J/(mol·K) x 308.15 K / 0.032 kg/mol)
5. Calculate the root mean square speed:
  vrms ≈ √(240,183.665625 J/mol) = 490.0853  ≈ 490.1 m/s

Therefore, the root mean square speed of an oxygen gas molecule (O2) at 35.0 °C is approximately 490.1 m/s.

Learn more about  root mean square speed : https://brainly.com/question/30759623

#SPJ11

Answer:

Pressure= 1.52atm

Explanation:

Using; PV = nRT

P (Pressure) = ?

V (Volume) = 10litres = 10dm³

n (Number of moles) = 0.6 mol

R (Universal Gas Constant) = 0.082

T (Absolute Temperature) = 35 + 273 = 308K.

P × 10 = 0.6 × 0.082 × 308

P = 15.1546 ÷ 10

P = 1.52atm

Mass of product 996.8972 mg. What is the melting point (mp) range of your product 110–115 °C.

To calculate the theoretical yield of the lactone product, we need to determine the limiting reagent first. We can do this by calculating the number of moles of each reagent present and comparing the ratios of the moles to the stoichiometric ratio of the reaction.

The balanced chemical equation for the reaction is:

C₂H₈O₃ + Br₂ → C₉H₉BrO4

From the equation, we can see that the stoichiometric ratio of C₂H₈O₃ to Br₂ is 1:1. Therefore, we need to calculate the number of moles of each reagent present in the reaction mixture and compare them.

Br₂ MW 159.81, d25 °C = 3.1028 mg/mL

C₂H₈O MW 164.16

C₉H₉BrO₄ 261.07

Assuming we have 1 mL of the reaction mixture, we can calculate the number of moles of Br2 present:

3.1028 mg/mL x 1 mL x (1 g / 1000 mg) x (1 mol / 159.81 g) = 1.940 x 10^-5 mol Br2

We can also calculate the number of moles of C₉H₈O₃ present:

Mass of C₉H₈O₃ = (1 g/mL) x 1 mL - (3.1028 mg/mL) x 1 mL = 996.8972 mg

Number of moles of C₉H₈O₃ = 996.8972 mg x (1 g / 1000 mg) x (1 mol / 164.16 g) = 6.072 x 10^-3 mol C₉H₈O₃

Since the stoichiometric ratio of C₉H₈O₃ to Br2 is 1:1, we can see that C₉H₈O₃ is present in excess, and Br₂ is the limiting reagent.

To calculate the theoretical yield of the lactone product, we can use the number of moles of Br₂ as the limiting reagent:

Number of moles of C₉H₉BrO₄ = 1.940 x 10^-5 mol Br₂ x (1 mol / 1 mol Br₂) x (1 mol C₉H₉BrO₄ / 1 mol) = 1.940 x 10^-5 mol C₉H₉BrO₄

Mass of C₉H₉BrO₄ = 1.940 x 10^-5 mol C₉H₉BrO₄ x 261.07 g/mol = 5.06 mg

Therefore, the theoretical yield of the lactone product is 5.06 mg.

To calculate the percent yield of the product, we need to know the mass of the isolated product. Let's assume that the mass of the isolated product is 4.5 mg.

Percent yield = (mass of isolated product / theoretical yield) x 100%

Percent yield = (4.5 mg / 5.06 mg) x 100% = 89%

The melting point range of the product is 110–115 °C (Lit.). This means that the melting point of the product should fall within this range if it is pure. However, the melting point range alone is not enough to determine the purity of the product. Other characterization methods, such as spectroscopic analysis, should also be used to confirm the identity and purity of the product.

Know more about moles here: https://brainly.com/question/31597231

#SPJ4

When NaOClO3 is dissolved in pure water, the pH of the solution will increase. NaOClO3 is a salt that dissociates in water to form Na+ and ClO3-. The pH of the solution will depend on the basicity or acidity of these ions. Na+ is a neutral ion and will not affect the pH of the solution.

ClO3-, on the other hand, is a conjugate base of a weak acid (HClO3). As a result, ClO3- is a weak base that can accept protons from water molecules to form OH- ions. This process is called hydrolysis and leads to an increase in the pH of the solution.

Therefore, when NaOClO3 is dissolved in pure water, the pH of the solution will increase. This effect is more pronounced at higher concentrations of NaOClO3.

The degree of hydrolysis depends on the acid-base strength of the ions and the ionic strength of the solution. Overall, NaOClO3 is a basic salt that will increase the pH of pure water.

To know more about pH refer here:

https://brainly.com/question/2288405#

#SPJ11

The molar ratio of Al to alum in this reaction is 1:1.

From the balanced equation, the molar ratio of Al and alum in the reaction is as follows:
2 Al(s) + 2 KOH(aq) + 22 H2O(l) + 4H2SO4 → 2 [KAl(SO4)2·12 H2O(s)] + 3H2(g)
In this balanced equation, 2 moles of Al react to form 2 moles of alum ([KAl(SO4)2·12 H2O]). Therefore, the molar ratio of Al to alum is:
2 moles Al : 2 moles alum
To simplify the ratio, divide both sides by 2:
1 mole Al : 1 mole alum
So, the molar ratio of Al to alum in this reaction is 1:1.

Learn more about molar ratio or mole ratio : https://brainly.com/question/30632038

#SPJ11

The oil from the seeds can be obtained by crushing, grinding, or rolling and then doing mechanical pressing to liberate oil from the seeds.

Most of the plants have seeds and they are a source of vegetable oils that can be used for cooking, medicinal purposes, and other self-care purposes. Oil can be extracted from the seeds by following a vigorous mechanical procedure.

The seeds are crushed to separate the oil, then mixed with a solvent like water or hexane. Then the oil floats on the liquid and is separated from the mixture. The cold-pressed oils are so pure.

Some of the important vegetable seed oils are coconut oil, almond oil, hazel-nut oil, hemp seed oil etc. All these oils are used on a daily basis for various requirements.

To know more about Vegetable oils, click on:https://brainly.com/question/16788604

In the early phases of protein folding, sheets are less likely to form than helices because sheets need the alignment of several polypeptide chains.

The polypeptide chain starts to fold into its natural conformation during the first stages of protein folding. Because it includes hydrogen bonding between neighbouring residues along a single polypeptide chain, the creation of helices is advantageous. In contrast, the formation of the distinctive hydrogen-bonded sheet structure in sheets necessitates the alignment of many polypeptide chains in a certain orientation. Because it requires numerous chains to join together in a certain orientation, whereas helices can form from a single chain, this alignment is less likely to happen by accident. Therefore, during the initial phases of protein folding, sheets are less likely to form.

learn more about  helices here:

https://brainly.com/question/13032246

#SPJ11

The pH of the solution formed by adding 30 mL of 0.10 M NaOH to 50 mL of 0.10 M CH₃COOH is 9.61.

First, we need to determine the number of moles of CH₃COOH and NaOH in the solution.

moles of CH₃COOH = 0.050 L × 0.10 mol/L = 0.005 mol

moles of NaOH = 0.030 L × 0.10 mol/L = 0.003 mol

Next, we need to determine which species is the limiting reagent. Since NaOH reacts with CH₃COOH in a 1:1 ratio, and there are fewer moles of NaOH than CH₃COOH, NaOH is the limiting reagent.

The reaction between NaOH and CH₃COOH produces NaCH₃COO and H₂O. The NaCH₃COO is a salt that is completely dissociated in water, so we can ignore it for pH calculations.

The reaction also produces H₃O⁺ ions, which will determine the pH of the solution.

Since NaOH is a strong base, it completely dissociates in water to produce OH⁻ ions. We can use the equation for the reaction between NaOH and H₂O to determine the concentration of OH⁻ ions in the solution:

NaOH + H₂O → Na⁺ + OH⁻ + H₂O

[OH⁻] = [NaOH] = 0.003 mol / (0.050 L + 0.030 L) = 0.03 M

Now we need to determine the concentration of CH₃COOH that remains unreacted. Since CH₃COOH is a weak acid, it only partially dissociates in water. We can use the expression for the equilibrium constant for the dissociation of acetic acid to determine the concentration of H₃O⁺ ions in the solution:

K_a = [CH₃COO⁻][H₃O⁺] / [CH₃COOH]

Assuming that the concentration of CH₃COOH that remains unreacted is x:

K_a = (0.005 - x)(x) / (0.005 + x)

Solving for x using the quadratic formula gives:

x = 0.00182 mol

Therefore, the concentration of H₃O⁺ ions in the solution is:

[H₃O⁺] = K_a / [CH₃COOH] = (1.8 × 10⁻⁵) .

learn more about equilibrium here:

https://brainly.com/question/30807709

#SPJ11