The atomic absorption sensitivity of lead in this solution is 0.55 ppm.
The atomic absorption sensitivity (ppm) can be calculated using the following formula: Atomic Absorption Sensitivity = Atomic Absorption Signal / Concentration of Element
In this case, the atomic absorption signal is 9.4 and the concentration of lead in the solution is 17 ppm. Therefore, Atomic Absorption Sensitivity = 9.4 / 17, Atomic Absorption Sensitivity = 0.55 ppm
So, the atomic absorption sensitivity of lead in this solution is 0.55 ppm.
To know more about atomic absorption, refer here:
https://brainly.com/question/30695254#
#SPJ11
identify the element in period 3 with the following successive ionization energies (ies) in kj/mol. input the symbol of the element. ie1 = 578 ie2 =1820 ie3 = 2740 ie4 =11,500 ie5 =13,000
The element in period 3 with successive ionization energies (IE1 = 578, IE2 = 1820, IE3 = 2740, IE4 = 11,500, and IE5 = 13,000) is Magnesium (Mg).
The very minimum energy required to remove one electron from a gaseous atom in isolation is referred to as ionization energy. Because these atoms are more stable and have orbitals that are partially and completely occupied, it takes more energy to remove an electron from them. In the case of such atoms, the ionization enthalpy is thus larger than the expected value.
To identify the element in period 3 with the successive ionization energies (IEs) in kJ/mol (IE1 = 578, IE2 = 1820, IE3 = 2740, IE4 = 11,500, and IE5 = 13,000), we need to follow these steps:
1. Locate the period 3 elements on the periodic table. Period 3 elements are those in the third row, and they include Na, Mg, Al, Si, P, S, and Cl.
2. Compare the given ionization energies with the known ionization energies of the period 3 elements.
After comparing the given ionization energies with the known values, we can identify the element as Magnesium (Mg).
The element in period 3 with successive ionization energies (IE1 = 578, IE2 = 1820, IE3 = 2740, IE4 = 11,500, and IE5 = 13,000) is Magnesium (Mg).
To learn more about ionization energies, visit: https://brainly.com/question/31192717
#SPJ11
calculate the theoretical yield nacl if you mix 2.00g of na2co3
The theoretical yield of NaCl when you mix 2.00g of Na2CO3 is 2.21g. Use the balanced equation's stoichiometry to determine the NaCl moles produced. To calculate the theoretical yield of NaCl when mixing 2.00g of Na2CO3, we need to first consider the balanced chemical equation for the reaction between Na2CO3 and HCl:
Na2CO3 + 2HCl -> 2NaCl + CO2 + H2O
This equation shows that one mole of Na2CO3 reacts with two moles of HCl to produce two moles of NaCl. We can use this information to calculate the theoretical yield of NaCl by following these steps:
1. Convert 2.00g of Na2CO3 to moles by dividing by its molar mass (105.99 g/mol).
2. Use stoichiometry to determine the moles of NaCl produced. Since the reaction produces two moles of NaCl for every mole of Na2CO3, we can multiply the moles of Na2CO3 by 2 to get the moles of NaCl.
3. Convert the moles of NaCl to grams by multiplying by its molar mass (58.44 g/mol).
The calculation looks like this:
2.00g Na2CO3 x (1 mol Na2CO3/105.99 g Na2CO3) x (2 mol NaCl/1 mol Na2CO3) x (58.44 g NaCl/1 mol NaCl) = 2.78g NaCl (theoretical yield)
Therefore, the theoretical yield of NaCl when mixing 2.00g of Na2CO3 is 2.78g.
Learn more about NaCl here:
https://brainly.com/question/18248731
#SPJ11
When an action potential reaches a neuromuscular junction, it causes acetylcholine to be released into this synapse. The acetylcholine binds to the nicotinic receptors concentrated on the motor end plate, a specialized area of the muscle fibre's post-synaptic membrane.
When an action potential reaches a neuromuscular junction, it triggers the release of acetylcholine into the synaptic cleft.
The acetylcholine then binds to the nicotinic receptors, which are concentrated on the motor end plate of the muscle fiber's post-synaptic membrane. This binding causes the opening of ion channels and the influx of positively charged ions, which results in depolarization of the muscle fiber's membrane. This depolarization then spreads through the muscle fiber, ultimately leading to muscle contraction. The action of acetylcholine at the neuromuscular junction is critical for normal muscle function and is targeted by many drugs used to treat neuromuscular disorders.
Learn more about depolarization :
https://brainly.com/question/29698882
#SPJ11
The table lists the specific heat values for brick, ethanol, and wood.Specific Heats of SubstancesSubstanceBrickEthanolWoodSpecific Heat (cal/g.°c)0.200.580.10Calculate the amount of heat, in calories, that must be added to warm 14.9 g of brick from 21.4 °C to 47.4 °C. Assume nochanges in state occur during this change in temperature.heat added: 165.308
Therefore, it takes 165.308 calories of heat to warm 14.9 g of brick from 21.4 °C to 47 °C.
What is a substance's specific heat?The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat.
Using the following calculation, we can determine how much heat is needed to raise 14.9 g of brick from 21.4 to 47.4 degrees Celsius:
q = m * c * ΔT
where q is the required quantity of heat, m is the substance's mass, c is its specific heat, and T is the temperature change.
Brick has a specific heat of 0.20 cal/g.°C, so when the given values are substituted, we obtain:
q = 14.9 g * 0.20 cal/g.°C * (47.4°C - 21.4°C)
q = 14.9 g * 0.20 cal/g.°C * 26°C
q = 165.308 cal
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
Therefore, it takes 165.308 calories of heat to warm 14.9 g of brick from 21.4 °C to 47 °C.
What is a substance's specific heat?The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat.
Using the following calculation, we can determine how much heat is needed to raise 14.9 g of brick from 21.4 to 47.4 degrees Celsius:
q = m * c * ΔT
where q is the required quantity of heat, m is the substance's mass, c is its specific heat, and T is the temperature change.
Brick has a specific heat of 0.20 cal/g.°C, so when the given values are substituted, we obtain:
q = 14.9 g * 0.20 cal/g.°C * (47.4°C - 21.4°C)
q = 14.9 g * 0.20 cal/g.°C * 26°C
q = 165.308 cal
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
What happens to the market price that buyers face as a result of taxation?
Multiple Choice select which one it is and ill give u 35 point ;D
1. It is greater than before the tax was imposed.
2. It is less than before the tax was imposed.
3. Taxation has no effect on price, only output.
4. Taxation affects average cost only.
Answer:
2) It is less than before the tax was imposed.
A portion of the tax that is levied on a commodity must be paid by the seller, which lowers their profit margin. Sellers will raise the cost of the good and pass this cost onto purchasers in order to preserve their profit. This causes the market price that buyers must pay to rise as a result of taxation.
2. CuCO3 is a sparingly soluble salt with a Ksp of 2.30x10-10. The addition of NH3(aq) to CuCO3(s) yields the complex ion [Cu(NH3)4]2+(aq) with a Kf of 1.07x1012. a. Write out the overall reaction below. Calculate the Keg for this overall reaction. b. What is the molar solubility of CuCO3 (s) in a solution with the equilibrium (NH3] = 0.2 M? c. The complex ion [Cu(en)2]2+(aq) has a Kf of 9.77x1019. Why does ethylene diamine (en) have a much large Kf than ammonia when forming a complex ion with metal cations?
The Keg for the overall reaction is [tex]2.01 x 10^21[/tex]. Once the concentration of ammonia (aq) in the solution has been determined, the equilibrium constant Keg for the entire process can be computed using equation.
How does concentration affect the equilibrium constant?Temperature-dependent The quantity of a reaction, the presence of a catalyst, or the presence of inert materials have no impact on equilibrium constants. It is also unaffected by the amounts, pressures, or concentrations of the reactants. The equilibrium constant's degree of temperature dependence is, in general, determined by the reaction.
What factors affect the equilibrium constant KC?The equilibrium constant is temperature-dependent and unaffected by the precise ratios of reactants to products, the presence of a catalyst, or the presence of inert substances. The volumes, pressures, and concentrations of the reactants and products have no impact on it either.
To know more about ammonia visit:-
https://brainly.com/question/14672082
#SPJ1
Which of the labeled groups in compound A is the best leaving group? Which of the labeled groups is the worst leaving group? HNYÖ :OH Which option correctly ranks the marked groups from best to worst leaving group? 0 O –OH,*>—OH——NH, -NH, >-OH-OH, -OH, >-NH, > -OH -OH >–NH, >-OH -OH -OH2>-NH,
In compound A, the best leaving group is the O –OH group, and the worst leaving group is the –OH group.
The correct ranking from best to worst leaving group is O –OH, > –NH, > –OH.
To explain this step-by-step:
1. A good leaving group is one that can easily dissociate from the molecule, stabilizing the negative charge it acquires upon leaving.
2. The O –OH group, being an alkoxide ion, is a better leaving group because it can stabilize the negative charge through resonance.
3. The –NH group is the next best leaving group, as it can somewhat stabilize the negative charge through its lone pair of electrons.
4. Finally, the –OH group is the worst leaving group among the given options, as it is less capable of stabilizing the negative charge upon leaving the molecule.
Know more about leaving group - brainly.com/question/30640450
SPJ11
tetrodotoxin acts by blocking sodium channels. how does it lead to a loss of excitatory conduction in neurons?
Tetrodotoxin blocks sodium channels, which prevents the influx of sodium ions and inhibits the generation and propagation of action potentials, leading to a loss of excitatory conduction in neurons.
Sodium channels are responsible for the rapid depolarization phase of the action potential in neurons. When an action potential is initiated, voltage-gated sodium channels open and allow an influx of sodium ions into the neuron, which depolarizes the membrane potential and triggers the propagation of the action potential down the axon.
Tetrodotoxin works by binding to the extracellular pore of the sodium channel and blocking the flow of sodium ions through the channel. This prevents the rapid depolarization of the membrane potential, which is necessary for the generation of action potentials. As a result, neurons are unable to generate action potentials and their ability to conduct electrical impulses is greatly diminished.
In summary, tetrodotoxin inhibits excitatory conduction in neurons by blocking sodium channels and preventing the generation and propagation of action potentials. This can lead to a range of neurological symptoms, including muscle weakness, paralysis, and respiratory failure, and can be fatal in high enough doses.
learn more about Tetrodotoxin here:
https://brainly.com/question/12222951
#SPJ11
a. many grams of calcium carbonate are necessary to weigh out 9.50 moles?
b. How many molecules of ammonia are there in 15.0 moles of NH3?
c. How many moles of H are there in 26.0 g of H20?
d. How many molecules of CH4 are there in 25.5 g of methane?
e. How many moles of H atoms are there?
a) The mass of 9.50 moles of calcium carbonate is 950.95 g.
b) The number of molecule in ammonia are 9.033 x 10²⁴ molecules.
c) The number of moles of H is 0.112 mol.
d) The number of molecule of methane is 9.57 x 10²³ molecules.
e) Number of moles of H atoms are2.
a. To determine how many grams of calcium carbonate are needed to weigh out 9.50 moles, we need to use the molar mass of calcium carbonate, which is approximately 100.09 g/mol. Therefore, the mass of 9.50 moles of calcium carbonate would be 9.50 mol x 100.09 g/mol = 950.95 g.
b. To calculate the number of molecules of ammonia in 15.0 moles of NH₃, we can use Avogadro's number, which is 6.022 x 10²³ molecules/mol. Thus, the number of molecules of ammonia would be 15.0 mol x 6.022 x 10²³ molecules/mol = 9.033 x 10²⁴ molecules.
c. To find the number of moles of hydrogen (H) in 26.0 g of H₂O, we need to first calculate the molar mass of H₂O. The molar mass of H₂O is approximately 18.015 g/mol. Therefore, the number of moles of H atoms in 26.0 g of H₂O can be found by dividing the mass of H in 1 mole of H₂O (2.016 g/mol) by the molar mass of H₂O: 2.016 g/mol ÷ 18.015 g/mol ≈ 0.112 mol.
d. To determine the number of molecules of CH₄ in 25.5 g of methane, we need to first calculate the molar mass of CH₄, which is approximately 16.04 g/mol. Then, we can use Avogadro's number to convert from moles to molecules: 25.5 g / 16.04 g/mol = 1.59 mol, and 1.59 mol x 6.022 x 10²³ molecules/mol ≈ 9.57 x 10²³ molecules.
e. To determine the number of moles of hydrogen (H) atoms, we need to know the number of moles of the compound that contains them. If we consider water (H₂O) as an example, we can find the number of moles of H atoms by using the same approach as in part c. In one mole of H₂O, there are two moles of H atoms. Therefore, to find the number of moles of H atoms, we can simply multiply the number of moles of H₂O by 2.
To know more about Avogadro's number click on below link:
https://brainly.com/question/28812626#
#SPJ11
Choose the stronger acid in each of the following pairs:
H2SeO3 or H2SeO4
The stronger acid between H₂S₂O₃ (thiosulfuric acid) and H₂SO₄ (sulfuric acid) is H₂SO₄.
To determine the stronger acid, we can compare their acid dissociation constant (Ka) values. A higher Ka value indicates a stronger acid, as it shows a greater tendency to donate a proton (H⁺).
Sulfuric acid (H₂SO₄) has a higher Ka value, with its first dissociation constant being around 10¹, while thiosulfuric acid (H₂S₂O₃) has a much lower Ka value. Therefore, H₂SO₄ is the stronger acid.
Additionally, the strong acidity of H₂SO₄ can be attributed to the highly electronegative oxygen atoms present in its structure, which stabilizes the negatively charged conjugate base (HSO₄⁻) formed after donating a proton.
On the other hand, H₂S₂O₃ has sulfur atoms in its structure, which are less electronegative and less able to stabilize the negative charge on the conjugate base, making it a weaker acid.
To know more about acid dissociation constant click on below link:
https://brainly.com/question/4363472#
#SPJ11
Complete question:
Choose the stronger acid in each of the following pairs:
H₂S₂O₃ or H₂SO₄
beyond what volume of added base is the ph calculated by focusing on the amount of excess strong based added?
The volume of added base beyond which the pH is calculated by focusing on the amount of excess strong base added is referred to as the equivalence point.
At this point, the amount of added strong base is equal to the amount of acid in the solution. The pH at the equivalence point depends on the strength of the acid and base being titrated.
When a strong base is added to a weak acid, the pH of the solution increases gradually until it reaches the equivalence point. However, if a strong acid is added to a weak base, the pH decreases until it reaches the equivalence point.
In general, the pH changes rapidly near the equivalence point, so it is important to add the base slowly near the end of the titration to accurately determine the equivalence point. Once the equivalence point is reached, the pH is calculated based on the amount of excess strong base added. The pH at the equivalence point can be used to determine the concentration of the acid or base being titrated.
In conclusion, the volume of added base beyond which the pH is calculated by focusing on the amount of excess strong base added is the equivalence point. Accurately determining the equivalence point is crucial in determining the concentration of the acid or base being titrated.
Here you can learn more about equivalence point
https://brainly.com/question/30464075#
#SPJ11
Which of the following reactiond of alkenes takes place with syn stereospecificity? a. Addition of HBr b. Acid catalyzed hydration (H2O/H2SO4) c. Addition of bromine (Br2) d. Hydrogenation (H2/Pt)
The addition of hydrogen (H2/Pt) to alkenes takes place with syn stereospecificity, meaning that the two hydrogen atoms are added to the same side of the double bond. Therefore, the correct answer is d. Hydrogenation (H2/Pt).
The other reactions listed do not have stereospecificity:a. Addition of HBr results in the formation of both the syn and anti addition products, meaning that the H and Br can add to either the same side or opposite sides of the double bond.b. Acid-catalyzed hydration (H2O/H2SO4) also does not have stereospecificity because the water molecule can add to either side of the double bond, leading to the formation of both the syn and anti addition products.
c. Addition of bromine (Br2) also does not have stereospecificity, as the two Br atoms can add to either side of the double bond, leading to the formation of both the syn and anti addition products.
Learn more about alkenes here:https://brainly.com/question/29120960
#SPJ11
The final molarity when adding 125 mL of water to 25.0 mL of a 3.0 M solution of KOH is Blank 1. Round atomic masses to the nearest whole number. Include 2 sig figs total in your answer.
Answer ASAP please thank you
The final molarity when adding 125 mL of water to 25.0 mL of a 3.0 M solution of KOH is 0.5 M
How do i determine the final molarity of the solution?First, we shall list out the given parameters from the question. Details below:
Initial volume of KOH solution (V₁) = 25 mLInitial molarity of KOH solution (M₁) = 3.0 MVolume of water added = 125 mLFinal volume of KOH solution (V₂) = 25 + 125 = 150 mL Final molarity of KOH solution (M₂) =?The final molarity of KOH solution can be obtained by using the dilution formular as illustrated below:
M₁V₁ = M₂V₂
3 × 25 = M₂ × 150
75 = M₂ × 150
Divide both side by 150
M₂ = 75 / 150
M₂ = 0.5 M
Thus, we can conclude that the final molarity of KOH solution is 0.5 M
Learn more about dilution:
https://brainly.com/question/15022582
#SPJ1
How many moles of Sulfur dioxide 73.0 grams of Sulfur dioxide? Report your answer to correct SF a. 1.1 mol b. 1.92 mol c. 1.14 mol d. 38.1 mol How many Grams of Carbon dioxide are in 1.00 mole of Carbon dioxide? Report the answer to 3 SF a. 28.0 gb. 32.0 g c. 44.0 gd. 88.0 g
Hence, 1.14 moles of Sulfur dioxide in 73 g and 44 grams of Carbon dioxide are in 1 mole.
The first question asks us to find the number of moles of sulfur dioxide in 73.0 grams. We can use the formula:
Moles = mass / molar mass,
where molar mass is the sum of the atomic masses of all the elements in the compound. For sulfur dioxide, the molar mass is 32.07 g/mol for sulfur and 2*16.00 g/mol for oxygen, giving a total of 64.07 g/mol.
Plugging in the given mass of 73.0 g and the molar mass, we get the number of moles to be 1.14 mol, which corresponds to option (c).
The second question asks us to find the mass of carbon dioxide in 1.00 mole. We can use the formula:
Mass = moles * molar mass,
where the molar mass is 12.01 g/mol for carbon and 2*16.00 g/mol for oxygen, giving a total of 44.01 g/mol for carbon dioxide. Plugging in the given number of moles of 1.00 mol and the molar mass, we get the mass to be 44.0 g, which corresponds to option (c).
Therefore, the answer to both questions is (c) 1.14 mol for the first question and 44.0 g for the second question.
Know more about Moles here:
https://brainly.com/question/24191825
#SPJ11
In a similar experiment to Part I, a solution of calcium hydroxide of unknown concentration is standardized against potassium hydrogen phthalate (KHP). From the data below, calculate the molarity of Ca(OH)2 solution. The balanced reaction is: Ca(OH)2 + 2KHC,H,O4 CaC,H,O4 + K_C2H404 + 2H,0. Note the 1:2 mole to mole ratio of calcium hydroxide to KHP. Mass of KHP consumed at titration end point: 0.914 g o Ca(OH)2 titrated to reach endpoint: 26.42 ml
The molarity of the Ca(OH)₂ solution from the balanced reaction above is 0.0846 M.
To calculate the molarity of the Ca(OH)₂ solution, we must convert the mass of KHP consumed (0.914 g) to moles. Use the molar mass of KHP (204.22 g/mol):
moles KHP = 0.914 g / 204.22 g/mol
= 0.00447 mol
Use the 1:2 mole ratio between Ca(OH)₂ and KHP:
moles Ca(OH)₂ = 0.00447 mol KHP / 2
= 0.002235 mol
Convert the volume of Ca(OH)₂ titrated (26.42 mL) to liters:
volume Ca(OH)₂ = 26.42 mL * (1 L / 1000 mL)
= 0.02642 L
Calculate the molarity of Ca(OH)₂ solution:
Molarity Ca(OH)₂ = moles Ca(OH)₂ / volume Ca(OH)₂
= 0.002235 mol / 0.02642 L
= 0.0846 M
Thus, the molarity of the Ca(OH)₂ solution is 0.0846 M.
Learn more about molarity: https://brainly.com/question/18648803
#SPJ11
what is an ambidentate ligand? give two examples (other than no2)
An ambidentate ligand is a type of ligand that can bond through two different atoms or groups in the same molecule.
How does an ambidentate ligand bond?An ambidentate ligand is a ligand that can bind to a central metal atom/ion through two different donor atoms present within the same molecule, but only one donor atom can bind at a time. This means that it can bond to a metal ion through either of these two atoms or groups. Two examples of ambidentate ligands, other than NO2, are:
1. SCN- (thiocyanate): This ligand can bind to the metal through either the sulfur (S) or the nitrogen (N) atom.
2. OCN- (cyanate): This ligand can bind to the metal through either the oxygen (O) or the nitrogen (N) atom.
To know more about Ligands:
https://brainly.com/question/13151575
#SPJ11
Would the indicator you investigated be an appropriate indicator for the titration of a strong acid with a strong base? Explain your answer. I used Bromcresol purple.
Yes, Bromcresol Purple would be an appropriate indicator for the titration of a strong acid with a strong base.
During a titration, an indicator is used to signal the endpoint or equivalence point of the reaction. Bromcresol Purple is a pH indicator that changes color in the pH range of 5.2 (yellow) to 6.8 (purple).
In the titration of a strong acid with a strong base, the equivalence point occurs at pH 7, which is close to the color change range of Bromcresol Purple. Therefore, Bromcresol Purple is suitable for this titration as it can accurately indicate when the strong acid has been neutralized by the strong base.
To learn more about indicator, visit:
https://brainly.com/question/29716580
#SPJ11
determine the most effective buffer made by hno2 and nano2 has a ph of 3.15. ka of hno2 is 7.110−4
To determine the most effective buffer made by HNO2 and NaNO2 with a pH of 3.15, we need to calculate the ratio of the concentrations of the conjugate acid-base pair (HNO2 and NO2-) that will give the desired pH.
The pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pKa is the acid dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
Substituting the given values:
pH = -log(7.11 x 10^-4) + log([NO2-]/[HNO2])
3.15 = 3.15 + log([NO2-]/[HNO2])
log([NO2-]/[HNO2]) = 0
[NO2-]/[HNO2] = 1
Therefore, the most effective buffer will be made by mixing HNO2 and NaNO2 in a 1:1 molar ratio. This will give a pH of 3.15 and will be able to resist changes in pH when small amounts of acid or base are added to the solution.
Learn more about buffer here:
https://brainly.com/question/22821585
#SPJ11
draw the product that will be isolated after thermal decarboxylation of the following compound. 2-Pentylmalonic acid
The product obtained after thermal decarboxylation of 2-pentylmalonic acid is 2-pentylpropanoic acid.
2-pentylmalonic acid has the following structure:
HOOC-CH(COOR)-CH2-CH2-CH2-CH3
Upon heating, the carboxylic acid group (-COOH) undergoes decarboxylation and is removed as carbon dioxide (CO2), leaving behind a ketone group (-C=O) at the alpha position. The remaining molecule is then the corresponding alkyl acid.
Thus, in the given compound, after thermal decarboxylation, the resulting molecule will have the structure:
CH3-CH2-CH2-CH2-CO-CH2-CH2-CH3
which is 2-pentylpropanoic acid.
Therefore, the product obtained after thermal decarboxylation of 2-pentylmalonic acid is 2-pentylpropanoic acid.
For more questions like Acid click the link below:
https://brainly.com/question/14319110
#SPJ11
Identify reagents that can be used to convert acetylene into 2-pentyne. A 1) NaNHz; 2) CH3l; 3) NaNH2; 4) CH3! B 1) NaNHz; 2) CH3l; 3) NaNH2; 4) CH3CH2! C 1) NaNH2; 2) CH3l; 3) CH3CH2! D 1) excess NaNH2; 2) excess CH3!
Reagents to convert acetylene into 2-pentyne are found in 1) NaNH₂; 2) CH₃I; 3) NaNH₂; 4) CH₃CH₂I.
So, the correct answer is B.
To synthesize 2-pentyne from acetylene, you need to perform two nucleophilic substitution reactions. First, acetylene is treated with NaNH₂ (sodium amide), a strong base, which removes a hydrogen atom from acetylene, generating an acetylide anion. This anion acts as a nucleophile and reacts with CH₃I (methyl iodide), forming 1-butyne. Then, 1-butyne is treated again with NaNH₂, generating another acetylide anion. Finally, this anion reacts with CH₃CH₂I (ethyl iodide), yielding the desired product, 2-pentyne.
Learn more about reagents at https://brainly.com/question/26905271
#SPJ11
to make sweet tea, a cook dissolved 152.395 grams of sugar (c6h6o2, fw = 110 g/mol) in 5.19 l of water at 32.34 °c. what is the molality of this sugar solution?
To make sweet tea, a cook dissolved 152.395 grams of sugar in 5.19 l of water at 32.34 °c. The molality of this sugar solution 0.275 mol/kg
To find the molality of the sugar solution, we need to first calculate the moles of sugar and the mass of solvent (water) in kilograms:
We know that molar mass of sugar= 110 g/mol
Moles of sugar = Mass of sugar / Molecular weight of sugar
Moles of sugar = 152.395 g / 110 g/mol
Moles of sugar = 1.385 mol
Mass of solvent (water) = Volume of solution - Mass of solute (sugar)
Mass of solvent (water) = 5.19 L - 0.146739 kg (since density of water is approximately 1 kg/L)
Now we can calculate the molality:
Molality = Moles of solute / Mass of solvent (in kg)
Molality = 1.385 mol / 5.043261 kg
Molality = 0.275 mol/kg
To know more about molality here
https://brainly.com/question/29175852
#SPJ4
Consider the reaction below. At equilibrium which species would be present in higher concentration? Justify your answer in terms of thermodynamic favorability and the equilibrium constant. 4NH3(g) + 3 O2 (g) --> 2 N2 + 6 H2O
NH3(g) will be present in higher amounts when the system is in equilibrium.
Which equilibrium constant reflects the highest product concentration?A very high value of K suggests that most of the reactants are transformed into products at equilibrium. The ratio of product concentrations to reactant concentrations raised to the proper stoichiometric coefficients is the equilibrium constant K.
What impact does temperature have on equilibrium constant thermodynamics?Yes, the equilibrium constant does fluctuate as the temperature changes. As the temperature drops, the exothermic reaction's equilibrium constant drops as well. However, in an endothermic reaction, the equilibrium constant rises as the temperature rises.
To know more about equilibrium constant visit:-
https://brainly.com/question/10038290
#SPJ1
1. The following figure represent a type of flame used in the laboratory. (a) Explain how the brightness of the flame can be increased.
The ways that the brightness of the flame can be increased are shown below.
How can the brightness of a laboratory flame be increased?By boosting the airflow into the burner, the flame's brilliance can be improved. Increasing the gas flow rate or changing the air intake valve can do this.
Using a gas that generates a brighter flame, like propane or butane, will increase the brightness of the flame. These gases produce a yellow flame because they have a higher carbon to hydrogen ratio than natural gas.
Learn more about laboratory flame:https://brainly.com/question/9018811
#SPJ1
Problem 3 Suppose you have 849 mL of a 0.85 M solution of a weak base and that the weak base has a pKb of 7.85. Part A Calculate the pH of the solution after the addition of 1.11 mol HCl. Approximate no volume change. Enter your answer to 2 decimal places. ANSWER: pH = on 0.00
The pH of the solution after the addition of 1.11 mol HCl is 7.85.
First, we need to find the initial concentration of the weak base:
0.85 M = [B]/0.849 L
[B] = 0.85 * 0.849 = 0.72165 mol/L
Next, we can use the pKb value to find the Kb value:
pkb = -log(Kb)
7.85 = -log(Kb)
Kb = 1.74 x 10⁻⁸
Now we can set up the equilibrium expression for the weak base:
B + H2O ⇌ BH+ + OH-
Kb = [BH+][OH-]/[B]
At equilibrium, we can assume that [OH-] is negligible compared to [B] and [BH+]. This allows us to simplify the expression to:
Kb = [BH+][OH-]/[B] ≈ [BH+][OH-]/([B] + [BH+])
Since we are dealing with a weak base, we can also assume that [BH+] is much less than [B]. This allows us to simplify the expression further to:
Kb = [BH+][OH-]/[B] ≈ [BH+][OH-]/[B]
Now we can use the initial concentration of the weak base and the Kb value to find [BH+]:
Kb = [BH+][OH-]/[B]
1.74 x 10⁻⁸= [BH+]/0.72165
[BH+] = (1.74 x 10⁻⁸ * 0.72165) = 1.0138 x 10⁻⁴ M
Next, we can use the balanced chemical equation for the reaction between HCl and the weak base:
HCl + B ⇌ BH+ + Cl-
Since we are adding 1.11 mol of HCl and the weak base is the limiting reactant, all of the weak base will react with the HCl. This means that the final concentration of BH+ will be equal to the initial concentration of the weak base:
[BH+] = 0.72165 mol/L
Now we can use the Henderson-Hasselbalch equation to find the pH of the solution:
pH = pKb + log([BH+]/[B])
pH = 7.85 + log(0.72165/0.72165)
pH = 7.85
learn more about pH here:
https://brainly.com/question/26856926
#SPJ11
White phosphorus is one of several forms of phosphorus and exists as a waxy solid consisting of P4 molecules. How many atoms are present in 0.350mol of P4? Answer should be in scientific notation.
The molar mass of P4 is 4 times the molar mass of a single phosphorus atom, which is approximately 30.974 g/mol. Therefore, the molar mass of P4 is: there are 8.41 x [tex]10^{23}[/tex] phosphorus atoms present in 0.350 mol of P4.
4 x 30.974 g/mol = 123.896 g/mol
To calculate the number of moles of P4 in 0.350 mol, we can use the following equation:
moles = mass / molar mass
mass = moles x molar mass
mass of P4 = 0.350 mol x 123.896 g/mol = 43.3676 g
Since each P4 molecule contains 4 phosphorus atoms, we can calculate the total number of phosphorus atoms in 0.350 mol of P4 as follows:
number of P atoms = number of P4 molecules x 4
number of P atoms = 0.350 mol x 6.022 x 10^23 molecules/mol x 4 atoms/molecule
number of P atoms = 8.41 x [tex]10^{23}[/tex] atoms
Therefore, there are 8.41 x [tex]10^{23}[/tex] phosphorus atoms present in 0.350 mol of P4.
Learn more about phosphorus atom
https://brainly.com/question/13422388
#SPJ4
determine concentration of oh- in a 0.724 m solution of bro- (Kb = 4.0 x 10^-6)
The concentration of OH- in a 0.724 M solution of BrO- is 4.0 x 10^-6 M.
To determine the concentration of OH- in a 0.724 M solution of BrO-, we first need to find the concentration of the corresponding BrO- ion. Since BrO- is a weak base, we can use the Kb value to calculate the concentration of OH- ions produced when it dissociates.
First, we need to write the balanced equation for the dissociation of BrO-:
BrO- + H2O ⇌ OH- + HBrO
The Kb expression for this reaction is:
Kb = [OH-][HBrO]/[BrO-]
Since we are given the Kb value and the concentration of BrO-, we can solve for [OH-]:
Kb = [OH-][HBrO]/[BrO-]
4.0 x 10^-6 = [OH-][0.724]/[BrO-]
[OH-] = (4.0 x 10^-6)(0.724)/[BrO-]
To solve for [BrO-], we need to use the fact that it dissociates according to the equation:
BrO- + H2O ⇌ OH- + HBrO
This means that the concentration of BrO- will be equal to the initial concentration of the solution, which is 0.724 M.
Plugging in the values, we get:
[OH-] = (4.0 x 10^-6)(0.724)/0.724
[OH-] = 4.0 x 10^-6 M
Learn more about ions here: brainly.com/question/14982375
#SPJ11
The iodate ion has a number of insoluble compounds. The Ksp for AgIO₃ is 3.0 x 10⁻⁸ and the Ksp for La(IO₃)₃ is 7.5 x 10⁻¹².
a. What is the solubility of AgIO₃ in a 0.285 M solution of NaIO₃?
b. What is the solubility of La (lO3)3 in a 0.285 M solution of NalO3?
c. Which compound is more soluble?
a. The solubility of AgIO₃ in a 0.285 M solution of NaIO₃ is 1.06 x 10⁻⁸ M. b. The solubility of La(IO₃)₃ in a 0.285 M solution of NaIO₃ is 4.31 x 10⁻¹² M. c. AgIO₃ is more soluble than La(IO₃)₃.
a. To calculate the solubility of AgIO₃, we need to first write the balanced chemical equation for the dissolution of AgIO₃ in water: AgIO₃(s) ⇌ Ag⁺(aq) + IO₃⁻(aq). The Ksp expression for this reaction is: Ksp = [Ag⁺][IO₃⁻]. Let x be the solubility of AgIO₃ in a 0.285 M solution of NaIO₃. Then, the equilibrium concentrations of Ag⁺ and IO₃⁻ are both equal to x. The initial concentration of IO₃⁻ is 0.285 M. Substituting the values into the Ksp expression and solving for x gives: x² = Ksp/[IO₃⁻] = (3.0 x 10⁻⁸)/(0.285) = 1.06 x 10⁻⁸ M.
b. The balanced chemical equation for the dissolution of La(IO₃)₃ in water is: La(IO₃)₃(s) ⇌ La³⁺(aq) + 3IO₃⁻(aq). The Ksp expression for this reaction is: Ksp = [La³⁺][IO₃⁻]³. Let x be the solubility of La(IO₃)₃ in a 0.285 M solution of NaIO₃. Then, the equilibrium concentrations of La³⁺ and IO₃⁻ are both equal to x. The initial concentration of IO₃⁻ is 0.285 M. Substituting the values into the Ksp expression and solving for x gives: x⁴ = Ksp/[IO₃⁻]³ = (7.5 x 10⁻¹²)/(0.285)³ = 4.31 x 10⁻¹² M.
c. Since the solubility of AgIO₃ is greater than the solubility of La(IO₃)₃ in a 0.285 M solution of NaIO₃, AgIO₃ is more soluble than La(IO₃)₃.
learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
Write the balanced NET ionic equation for the reaction when aqueous (NH₄)₃PO₄ and aqueous Zn(NO₃)₂ are mixed in solution to form solid Zn₃(PO₄)₂ and aqueous NH₄NO₃. Be sure to include the proper phases for all species within the reaction.
2 NH₄⁺(aq) + 3 Zn²⁺(aq) + 2 PO₄³⁻(aq) → Zn₃(PO₄)₂(s) + 6 NH₄⁺(aq) is the net ionic equation.
The balanced net ionic equation for the reaction when aqueous (NH₄)₃PO₄ and aqueous Zn(NO₃)₂ are mixed in solution to form solid Zn₃(PO₄)₂ and aqueous NH₄NO₃ is:
2 NH₄⁺(aq) + 3 Zn²⁺(aq) + 2 PO₄³⁻(aq) → Zn₃(PO₄)₂(s) + 6 NH₄⁺(aq)
The nitrate ions (NO₃⁻) do not participate in the reaction and are therefore not included in the net ionic equation. Additionally, the ammonium ions (NH₄⁺) are spectator ions and are therefore also not included in the net ionic equation.
Therefore, The phases for each species in the equation are:
NH₄⁺(aq) - ammonium ion, aqueous
Zn²⁺(aq) - zinc ion, aqueous
PO₄³⁻(aq) - phosphate ion, aqueous
Zn₃(PO₄)₂(s) - zinc phosphate, solid
NH₄⁺(aq) - ammonium ion, aqueous
To know more about Net Ionic equation refer here :
brainly.com/question/13879496
#SPJ11
instrumentation changes as science progresses, comments on it.
As scientific knowledge and technology advance, instrumentation also changes and evolves to better support scientific research and experimentation.
What is Science?
Science is a systematic and evidence-based approach to studying the natural world, including physical, biological, and social phenomena. It involves formulating hypotheses, conducting experiments, and analyzing data to generate knowledge and understanding about how the world works.
Advances in fields such as materials science, electronics, and computing have allowed for the development of more sophisticated and precise instruments, leading to new discoveries and greater understanding of the natural world.
Learn more about Science from the given link
https://brainly.com/question/18186842
#SPJ1
QuestionYoung's modulus of rubber is 104N/m2 and area of cross section is 2 cm−2. If force of 2×105 dyn is applied along its length, then its initial l becomes.A3lB4lC2lDNone of theseMedium
When 2 x 10⁵ dyn of force is applied along its length, the initial length (l) becomes (c) 2l.
First convert the given values to the appropriate units and then use the formula for Young's modulus.
Young's modulus (Y) = 10⁴ N/m²
Area of cross-section (A) = 2 cm² = 2 x 10⁻⁴ m² (since 1 cm² = 10⁻⁴ m²)
Force (F) = 2 x 10⁵ dyn = 2 N (since 1 N = 10⁵ dyn)
Young's modulus (Y) = Stress/Strain = (F/A)/(Δl/l)
We need to find the change in length (Δl) with respect to the initial length (l).
Rearranging the formula: Δl/l = F/(Y × A)
Now, substitute the given values:
Δl/l = 2 N / (10^4 N/m² × 2 x 10^-4 m²) = 1
Thus, Δl = l
The initial length becomes l + Δl = l + l = 2l. So the correct answer is option C, 2l.
Learn more about Young's modulus here: https://brainly.com/question/26660981
#SPJ11