A 5.0-kg box is pulled by a horizontal force F applied to the top of the box. When the box meets a low doorstep, it begins to rotate around it. The box is 60 cmcm wide and 70 cmcm high. What minimum magnitude of the force F is needed to cause this movement

Answers

Answer 1

Answer:

the required minimum magnitude of the force F is 21 N

Explanation:

Given the data in the question,

m = 5 kg

width  = 60 cm

height = 80 cm

Let force is F represent in the image below,

so when the block about to rotate normal shifted to edge of cube

mg(w/2) = Fh

F = mg(w/2) / h

we know that g = 9.8 m/s²

we substitute

F = (5 × 9.8 ( 60/2)) / 70

F = (5 × 9.8 × 30 ) / 70

F = 1470 / 70

F = 21 N

Therefore, the required minimum magnitude of the force F is 21 N

A 5.0-kg Box Is Pulled By A Horizontal Force F Applied To The Top Of The Box. When The Box Meets A Low
Answer 2

The minimum magnitude of the force needed to cause the movement is 34.3 N.

Given:

Mass of the box (m) = 5.0 kg

Width of the box (w) = 60 cm = 0.6 m

Height of the box (h) = 70 cm = 0.7 m

The torque acting is:

τ_weight = (mg) × (h÷2)

The total torque is zero. Therefore, the force is:

F × (h÷2) + (mg) × (h÷2) = 0

F = -(mg) × (h÷2) ÷ (h÷2)

F = -(5.0  × 9.8 ) × (0.7 m ÷ 2) / (0.7 m ÷ 2)

F = -34.3 N

|F| = 34.3 N

Hence, the minimum magnitude of the force F needed to cause the movement is 34.3 N.

To learn more about Force, here:

https://brainly.com/question/13191643

#SPJ6


Related Questions

True or False
Microscopic organisms grow on the rocks near a volcano if the rocks are cooled to 120 degrees Celsius or less.

Answers

Explanation:

it's true

Kiss me if I'm wrong. But dinosaurs still exist right?

Answer:

True

Definetely true

5) Which statement about leaders is true?
A) Leaders always make the right decisions.
B) A leader keeps the team focused on achieving its goals.
C) A leader's opinion counts more than the opinions of the other team members.
D) all of the above.

Answers

Answer: D) All of the above

Explanation:

light of wavelength 485 nm passes through a single slit of width 8.32 *10^-6m. what is the single between the first (m=1) and second (m=2) interference minima?

Answers

Answer:

3.35

Explanation:

Got it on Acellus

The light of wavelength 485 nm passes through a single slit. The single between the first (m=1) and second (m=2) interference minima is 3.36°.

What is diffraction?

Diffraction is the phenomenon of bending of waves through obstacles.  

Given is the wavelength λ= 485 nm, silt width d =  8.32 *10⁻⁶ m, then the angle θ will be

d sinθ =mλ

for m=1, sin θ₁ = λ/d

for m=2, sin θ₂ = 2λ/d

Substitute the values into both expressions to find the angles,

sin θ₁ = 485 x 10⁻⁹ /  8.32 *10⁻⁶

θ₁ = 3.34°

and sin θ₂ = (2 x  485 x 10⁻⁹ )/  8.32 *10⁻⁶

θ₂ = 6.7°

The angle between m =1 and m=2 will be

θ₂ -θ₁ = 6.7° - 3.34° =3.36°

Thus, angle between the first (m=1) and second (m=2) interference minima is 3.36°.

Learn more about diffraction.

https://brainly.com/question/12290582

#SPJ2

A copper wire of resistivity 2.6 × 10-8 Ω m, has a cross sectional area of 35 × 10-4 cm2
. Calculate
the length of this wire required to make a 10 Ω coil.

Answers

Answer:

the length of the wire is 134.62 m.

Explanation:

Given;

resistivity of the copper wire, ρ = 2.6 x 10⁻⁸ Ωm

cross-sectional area of the wire, A  = 35 x 10⁻⁴ cm² = ( 35 x 10⁻⁴) x 10⁻⁴ m²

resistance of the wire, R = 10Ω

The length of the wire is calculated as follows;

[tex]R = \frac{\rho L}{A} \\\\L = \frac{RA}{\rho} \\\\L= \frac{10 \times (35\times 10^{-4}) \times 10^{-4}}{2.6 \times 10^{-8}} \\\\L = 134.62 \ m[/tex]

Therefore, the length of the wire is 134.62 m.

A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.60 s for the boat to travel from its highest point to its lowest, a total distance of 0.630 m . The fisherman sees that the wave crests are spaced a horizontal distance of 5.70 m apart.

Required:
a. How fast are the waves traveling?
b. What is the amplitude of each wave?
c. If the total vertical distance traveled by the boat were 0.30 m but the other data remained the same, how would the answers to parts (a) and (b) be affected?

Answers

Answer:

a) v = 1.1 m/s

b) A = 0.315 m

c) v = 1.1 m/s  A= 0.15 m

Explanation:

a)

In any travelling wave, there exists a fixed relationship between the propagation speed, the wavelength and the frequency, as follows:

        [tex]v = \lambda * f (1)[/tex]

If the wave crests are spaced a horizontal distance of 5.7 m apart, this means that the wavelength of the wave is just the same, i.e., 5.70 m.Regarding the frequency, we know that the frequency is just the inverse of the period, i.e., the time needed to complete one oscillation.If it takes a time of 2.60 s to go from the highest point to the lowest, the time needed to complete an oscillation (the period T) will be just double of this time:⇒ T = 2.60 s * 2 = 5.20 s (2)Since we have now T, we can find the frequency f as follows:

       [tex]f = \frac{1}{T} = \frac{1}{5.20s} = 0.19 Hz (3)[/tex]

Replacing f and λ in (1) we get:

      [tex]v = \lambda * f = 5.70 m * 0.19 Hz = 1.10 m/s (4)[/tex]

b)

The amplitude of the wave is just the amount that the water aparts from its equilibrium level, which is just the half of the distance between its highest point and the lowest one, as follows:

      [tex]A = \frac{0.630m}{2} = 0.315 m (5)[/tex]

c)  

Part a) will not be affected by the new amplitude, because we have showed that the speed is independent of the amplitude, so v can be written as follows:

       v = 1.10 m/s (6)

Part b) will change , due to the amplitude changes. If the total vertical distance traveled by the boat is 0.30 m, by the same token as explained in b), the new amplitude will be just half of this, as follows:

       [tex]A = \frac{0.30m}{2} = 0.15 m (7)[/tex]

HELP URGENT PLEASE!!!!!!!

Answers

Answer:

I think c I dont know sorry if I'm wrong

It is C because the North Magnets are stronger than the south magnets and C is the only diagram showing that relation in the middle :)

A student using a stopwatch finds that the time for 10 complete orbits of a ball on the end of a string is 25 seconds. The period of the orbiting ball is​

Answers

Answer:

T = 2.5 s

Explanation:

Given that,

Number of complete orbits = 10

Time, t = 25 seconds

We need to find the period of the orbiting ball. Let it is T. We know that number of oscillations per unit time is called frequency and the reciprocal of frequency is called period of the ball.

So,

[tex]T=\dfrac{t}{n}\\\\T=\dfrac{25}{10}\\\\T=2.5\ s[/tex]

So, the period of the orbiting ball is equal to 2.5 seconds.

A 1.65-m-long wire having a mass of 0.100 kg is fixed at both ends. The tension in the wire is maintained at 16.0 N. (a) What are the frequencies of the first three allowed modes of vibration

Answers

Answer:

Explanation:

mass per unit length ρ = .100 / 1.65 = .0606 . kg /m

length of wire L = 1.65 m

For fundamental frequency , the expression is as follows

n = [tex]\frac{1}{2L} \sqrt{\frac{T}{m} }[/tex]

L = 1.65 , T = 16 n and m = .0606

n = [tex]\frac{1}{2\times 1.65} \sqrt{\frac{16}{.0606} }[/tex]

= 4.9 /s .

This is fundamental frequency .

other mode of vibration ( first three ) will be as follows

4.9 x 2 = 9.8 /s ,

4.9 x 3 = 14.7 /s .

7. A particle of mass 3 kg is held in equilibrium by two light unextensible strings. One string is horizontal, as shown in Figure 7.30. The tension in the horizontal string is PN and the tension in the other string is N. Find a) the value of 0 b) the value of P.​

Answers

The tension in the strings are 31.47 and 19.25 N respectively.

Mass of the block, m = 3 kg

From the figure, consider the vertical components,

T₁ sin45° + T₂ sin30° = mg

(T₁/√2) + (T₂/2) = 3 x 9.8 = 29.4

Also, consider the horizontal components,

T₁ cos45° = T₂ cos30°

T₁/√2 = T₂ x√3/2

T₁ = T₂ x √3/2 x √2

So,

T₁ = 0.612T₂

Applying in the first equation,

(T₁/√2) + (T₂/2) = 29.4

(0.612T₂/1.414) + 0.5T₂ = 29.4

0.434 T₂ + 0.5 T₂ = 29.4

0.934 T₂ = 29.4

Therefore, the tension,

T₂ = 29.4/0.934

T₂ = 31.47 N

So, the tension,

T₁ = 0.612 T₂

T₁ = 0.612 x 31.47

T₁ = 19.25 N

To learn more about tension, click:

https://brainly.com/question/30037765

#SPJ1

Which of the following happens to
density as air pressure decreases?
С C
A. Density increases.
B. Density stays the same.
C. Density decreases.
D. There is no correlation between air pressure and
density.

Answers

Explanation:

As pressure increases, with temperature constant, density increases. Conversely when temperature increases, with pressure constant, density decreases. Air density will decrease by about 1% for a decrease of 10 hPa in pressure or 3 °C increase in temperature.

Which of the following best defines
weather?
A. the expanding or contracting of the atmosphere
B. the measurement of the amount of water vapor in the
atmosphere
C. the condition of the atmosphere at a certain time and
place
Help Resources
D. the average air temperature of a specific region

Answers

Answer:

I'd say D

Explanation:

because not all weather happens within the atmosphere, and most weather depends on region (lile if your near the equator or not)

A 4.0 kg block is moving at 5.0 m/s along a horizontal frictionless surface toward and ideal spring that is attached to a wall , After the block collides with the spring, the spring is compressed a maximum distance of 0.68m . what is the speed of the block when the spring is compressed to only one-half of the maximum distance?

Answers

A 4.0 kg block is moving at 5.0 m/s along a horizontal frictionless surface toward an ideal spring that is attached to a wall, the maximum speed of the block when the spring is compressed to one-half of the maximum distance is 4.33 m/s

From the conservation of energy; the kinetic energy of the mass is equal to the work done on the spring.

i.e.

[tex]\mathbf{\dfrac{1}{2} mv^2 = \dfrac{1}{2}kx^2_{max}}[/tex]

Given that:

the mass of the block = 4.0 kg the speed at which it is moving = 5.0 m/scompression of the spring = 0.68 m

From the equation above, multiplying both sides with 2, we have:

[tex]\mathbf{mv^2 =kx^2_{max}}[/tex]

Making (k) the subject of the formula;

[tex]\mathbf{k = \dfrac{mv^2}{x^2_{max}}}[/tex]

[tex]\mathbf{k = \dfrac{4 \times 5^2}{0.68^2}}[/tex]

k = 216.26 N/m

However, when compressed to one-half of the maximum distance; the speed is computed as follows:

x = 0.68/2 = 0.34 m

[tex]\mathbf{\dfrac{1}{2}mv_o^2 - \dfrac{1}{2}mv^2 = \dfrac{1}{2}kx^2}[/tex]

[tex]\mathbf{m(v_o^2 -v^2) =kx^2}[/tex]

[tex]\mathbf{(v_o^2 -v^2) =\dfrac{kx^2}{m}}[/tex]

[tex]\mathbf{(5^2 -v^2) =\dfrac{216.26 \times 0.34^2}{4.0}}[/tex]

25 - v² = 6.25

25 -6.25 = v²

v² = 18.75

[tex]\mathbf{ v= \sqrt{18.75 }}[/tex]

v = 4.33 m/s

Therefore, we can conclude that the speed of the block when the spring is compressed to only one-half of the maximum distance is 4.33 m/s

Learn more about speed here:

https://brainly.com/question/22610586?referrer=searchResults

What is a transfer of energy called?
A. Displacement
B. Acceleration
C. Work
D. Torque

Answers

Your answer is c, work

Which of these cubes absorb the most light?

Answers

Answera black cube or dark colors cause dark colors suck in heat

Which factor affects the color of the star?
Luminosity
Temperature
Apparent Magnitude
None of the aobve

Answers

Answer:

temperature

Explanation:

if you look at a hertzsprung-russel diagram. you can understand how I got that answer

Temperature affects the colod

Please answer this for 15 points please don’t put in a link.

Answers

It’s b I took the test

Answer:

c. Double Replacement

Explanation:

As in Double Replacement reaction exchanges the cations (or the anions) of two ionic compounds.

Here, in BaCl2 , Ba has replaced with NO3 to form Ba(NO3)2

and in 2AgNo3 , Ag has replaced with Cl to form 2AgCl.

Pls help ASAP
Imagine that Maritans launch a rocket toward the Earth at a great speed. While the
rocket is traveling toward us, it will appear
than it actually is.
O more blue
darker
larger
more red

Answers

Answer:

The rocket will appear larger than it actually is

A car is moving around a circular track of radius 25m with a speed of 30 m/s. What is the centripetal acceleration of the car? *

A 72 m/s2
B 36 m/s2
C 30 m/s2
D 6 m/s2

Answers

Answer:

I don't know how to do it the subject

The centripetal acceleration of the car when there is the radius and the speed is given so it should be considered as the option b. 36 [tex]m/s^2[/tex].

Calculation of the centripetal acceleration of the car:

Since

The radius is 25 cm and the speed should be 30 m/s

Now the following formula should be used

Acceleration = speed^2/ radius

= 30^2 / 25

= 900 / 25

= 36 [tex]m/s^2[/tex]

Therefore, The centripetal acceleration of the car should be considered as the option b. 36 [tex]m/s^2[/tex].

Learn more about speed here: https://brainly.com/question/20361733?referrer=searchResults

If an athlete runs the triathlon of 10 km in 2 hours, what is her average speed in kilometers per hour?

Answers

Answer: 5 km per hour

Explanation:

if in 10 km there is 2 hours, then 10 divided by 2 is 5.

One end of a meter stick is pinned to a table, so the stick can rotate freely in a plane parallel to the tabletop. Two forces, both parallel to the tabletop, are applied to the stick in such a way that the net torque is zero. The first force has a magnitude of 2.00 N and is applied perpendicular to the length of the stick at the free end. The second force has a magnitude of 6.00 N and acts at a 42.9o angle with respect to the length of the stick. Where along the stick is the 6.00-N force applied? Express this distance with respect to the end of the stick that is pinned.

Answers

Answer:

  x = 0.455 L

Explanation:

For this exercise we must use the rotational equilibrium condition

        Σ τ = 0

it has two forces, the first is perpendicular to the rod, so its stub is

         τ₁ = F₁ L

the second force is applied with an angle, so we can use trigonometry to find its components

          sin θ = F_parallel / F₂

          cos θ = F_perpendicular / F₂

         F_parallel = F₂ sin θ

         F _perpendicular = F₂ cos θ

torque is

         τ₂ = F_perpendicular x + F_parallel 0

the parallel force is on the rod therefore its distance is zero

           

we apply the equilibrium equation

          τ₁  - τ₂ = 0

          F₁ L = F₂ cos θ  x

          x = [tex]\frac{L}{cos \theta} \ \frac{F_1}{F_2}[/tex]

let's calculate

          x = [tex]\frac{L}{cos \ 42.9} \ \frac{2.00}{6.00}[/tex]

          x = 0.455 L

What is wrong with the following momentum value: 25 kg*m/s

Answers

Answer:

25N/s or 25kg*m/s^2

Explanation:

It is written wrong because the unit of momentum is kgm/s^2 or N/s

If you live in Melbourne, Australia, the local magnetic field has a strength of about 4x10-5 T. The magnetic field vector is directed northward, making an angle of 30 deg above the horizontal. An electron in Melbourne is moving parallel to the ground, in the west direction, at a speed of 9x105 m/s. What are the magnitude and direction of the magnetic force on the electron

Answers

Answer:

[tex]5.76\times 10^{-18}\ \text{N}[/tex] perpendicular to the velocity and magnetic field

Explanation:

B = Magnetic field = [tex]4\times 10^{-5}\ \text{T}[/tex]

[tex]\theta[/tex] = Angle the magnetic field makes with the horizontal = [tex]30^{\circ}[/tex]

v = Velocity of electron = [tex]9\times 10^5\ \text{m/s}[/tex]

q = Charge of electron = [tex]1.6\times 10^{-19}\ \text{C}[/tex]

Magnetic force is given by

[tex]F=qvB\sin\theta\\\Rightarrow F=1.6\times 10^{-19}\times 9\times 10^5\times 4\times 10^{-5}\sin30^{\circ}\\\Rightarrow F=2.88\times 10^{-18}\ \text{N}[/tex]

The magnitude of the magnetic force is [tex]2.88\times 10^{-18}\ \text{N}[/tex] and the direction is perpendicular to the velocity and magnetic field.

A car weighing 1,500kg possesses 20 000 units of momentum. What would be the car's new momentum if it's velocity was tripled

Answers

Answer:

▓▓▓

▒▒▒▓▓

▒▒▒▒▒▓

▒▒▒▒▒▒▓

▒▒▒▒▒▒▓

▒▒▒▒▒▒▒▓

▒▒▒▒▒▒▒▓▓▓

▒▓▓▓▓▓▓░░░▓

▒▓░░░░▓░░░░▓

▓░░░░░░▓░▓░▓

▓░░░░░▓░░░▓

▓░░▓░░░▓▓▓▓

▒▓░░░░▓▒▒▒▒▓

▒▒▓▓▓▓▒▒▒▒▒▓

▒▒▒▒▒▒▒▒▓▓▓▓

▒▒▒▒▒▓▓▓▒▒▒▒▓

▒▒▒▒▓▒▒▒▒▒▒▒▒▓

▒▒▒▓▒▒▒▒▒▒▒▒▒▓

▒▒▓▒▒▒▒▒▒▒▒▒▒▒▓

▒▓▒▓▒▒▒▒▒▒▒▒▒▓

▒▓▒▓▓▓▓▓▓▓▓▓▓

▒▓▒▒▒▒▒▒▒▓

▒▒▓▒▒▒▒▒▓

Explanation:

Suppose a diode consists of a cylindrical cathode with a radius of 6.200×10−2 cm , mounted coaxially within a cylindrical anode with a radius of 0.5580 cm . The potential difference between the anode and cathode is 400 V . An electron leaves the surface of the cathode with zero initial speed (vinitial=0). Find its speed vfinal when it strikes the anode.

Answers

Answer:

The final speed will be "[tex]1.185\times 10^7 \ m/sec[/tex]".

Explanation:

The given values are:

Potential difference,

Δv = 400 v

Radius,

r = 0.5580 cm

As we know,

⇒  [tex]W=e \Delta v[/tex]

and,

⇒  [tex]\frac{1}{2}mv^2=e \Delta v[/tex]

then,

⇒  [tex]v=\sqrt{\frac{2e \Delta v}{m} }[/tex]

On substituting the values, we get

⇒     [tex]=\sqrt{\frac{2\times 1.6\times 10^{-19}\times 400}{9.11\times 10^{-31}} }[/tex]

⇒     [tex]=\sqrt{\frac{1.6\times 10^{-19}\times 800}{9.11\times 10^{-31}}}[/tex]

⇒     [tex]=1.185\times 10^7 \ m/sec[/tex]

the atom of an element x has 21protrons and 23neutrons. What is the
(a) Electron number
(b) Mass number
(c) Neutron number​

Answers

A. 21 electrons
B. 44
C. 23 neutrons

What is Newton's scientific view?

Answers

Answer:

Newton's first law of motion concerns any object that has no force applied to it.

Explanation:

three laws of motion and the law of universal gravitation.

Blocks A (mass 5.00 kg) and B (mass 6.50 kg) move on a frictionless, horizontal surface. Initially, block B is at rest and block A is moving toward it at 3.00 m/s. The blocks are equipped with ideal spring bumpers. The collision is head-on, so all motion before and after the collision is along a straight line.
(a) Find the maximum energy stored in the spring bumpers and the velocity of each block at that time.
(b) Find the velocity of each block after they have moved apart.

Answers

Answer: i believe  its B Find the velocity of each block after they have moved apart sorry

Explanation: have a nice day buddy

which particle have a mass of 1 u​

Answers

Answer:

Explanation:

proton

The magnitude of the force can be determined as? ​

Answers

Answer:

the mass of the object multiplied by the acceleration of the object

Explanation:

N2L states that F = ma (force equals mass times acceleration).

Make a poem about waves with 12 Lines and 3 Stanzas.

Answers

In a ocean full of storms

A new wave was born

Deep into that darkness flooding

Suddenly, I heard some pummeling

By the grave I saw the winds

And the sun just shined

Answer:

a friendly face that comes with waves,

the waves of all the memorial days,

and with these days we smile with pride,

as for the waves we used to ride,

given up the day has passed,

how it went away like an hour glass,

as if we knew the world was right,

just like the waves, oh so bright,

the time has come the days have passed,

the waves ashore the waves alast,

as if the friendly face was right,

the waves that rode, oh goodnight.

Other Questions
whenever any new organizational change initiative is announced, one of the first things that employees consider is "how will this affect the company?"a. trueb. false rhombus lmno is shown with its diagonals. the length of ln is 28 centimeters. what is the length of lp? 7 cm 9 cm 14 cm 21 cm Find the first three terms in each linearly independent series solutions (unless the series terminates sooner) to the differential equation centered at x=0. Make sure to derive the recurrence relation and use it to get the coefficients. y"-xy=0 an+antique+store+increases+all+of+its+prices+by+$40\%$,+and+then+announces+a+$25\%$-off-everything+sale.+what+percent+of+the+original+prices+(before+the+increase)+are+the+new+prices? the nurse reviews the daily weights of a breastfeeding term newborn. what conclusion does the nurse make about the weight loss? Suppose you know that P(Z The Capital Asset Pricing Model and the security market line Wilson holds a portfolio that invests equally in three stocks (wa = WB = Wc = 1/3). Each stock is described in the following table: Stock Beta Standard Deviation Expected Return A 0.5 23% 7.5% B 1.0 38% 12.0% C 2.0 45% 14.0% An analyst has used market- and firm-specific information to generate expected return estimates for each stock. The analyst's expected return estimates may or may not equal the stocks' required returns. You've also determined that the risk-free rate [rrf] is 4%, and the market risk premium [RPM] is 5%. Given this information, use the following graph of the security market line (SML) to plot each stock's beta and expected return on the graph. (Note: Click on the points on the graph to see their coordinates.) 20 18 Stock A 16 14 12 Stock B RATE OF RETURN (Percent) Stock C 2 0 0 0.2 0.4 0.6 1.4 1.6 1.8 2.0 0.8 1.0 1.2 RISK (Beta) A stock is in equilibrium if its expected return its required return. In general, assume that markets and stocks are in equilibrium (or fairly valued), but sometimes investors have different opinions about a stock's prospects and may think that a stock is out of equilibrium (either undervalued or overvalued). Based on the analyst's expected return estimates, Stock A is Stock B is , and Stock C is in equilibrium and fairly valued. Detail Internal and external respiration Suppose we have a random variable X where the probability associated with the value (19) (-37)"(.63)10-k for k = 0,..,10. What is the mean of X? + (A) 0.37 (B) 0.63 (C) 3.7 (D) 6.3 (E) None of the above A sample of a gas has an initial pressure of 0.987 atm and a volume of 12.8 L what is the final pressure if me volume is increased to 25.6 L? a. 1.97 atm b. 323.4 atm c. 0.494 atm d. 0.003 atm e. 2.03 atm Which of the following statements regarding the expansion of (x + y)^n are correct? A. For any term x^ay^b in the expansion, a + b = n. B. For any term x^a y^b in the expansion, a - b = n. C. The coefficients of x^a y^b and x^b y^a are equal. D. The coefficients of x^n and y^n both equal 1. Moving to another question will save this response. Question 10 A company estimates that warranty expense will be 5% of sales. The company has sales of $225,000 for the current period. The current Consider a spherical Gaussian surface and three charges: q1 = 2.18 C , q2 = -3.22 C , and q3 = 4.57 C . Find the electric flux through the Gaussian surface if it completely encloses (a) only charges q1 and q2, (b) only charges q2 and q3, and (c) all three charges.Part D Suppose a fourth charge, Q, is added to the situation described in part C. Find the sign and magnitude of Q required to give zero electric flux through the surface. 92) why did mendel continue some of his experiments to the f2 generation? a) to obtain a larger number of offspring on which to base statistics b) to observe whether or not a recessive trait would reappear c) to observe whether or not the dominant trait would reappear On the Island of Knights and Knaves we have two people A and B.A says: Exactly one of us is a knight.B says: A is a knight if at least one of us is a knight.Using an approach similar to the one in the notes, determine if A and B are each a knight or a knave. what is the narrative point of view of the story? first-person point of view second-person point of view third-person point of view Moving to another question will save this response. Question 11 In creating partnerships, partners are allowed to invest cash ONLY for their shares in the partnership. O True O False Moving to ano Thank you!Question 1 Suppose the demand for towels is given by QD=100-5P and the supply of towels is give by QS=10P. Use negative signs where appropriate in your answers. Round your answers to the nearest one- An introduction to economics course is offered in 3 sections each with different instructor. The final grades from the spring term are presented below. Is there a significant difference in the average grades given by the instructors? State and test the hypothesis at the significance level 0.01.Section 1Section 2Section 398.465.354.795.689.665.387.374.474.369.358.858.975.577.392.35858.958.566.966.687.3 1) What is the role of probability in statistics?2) How can we use probabilities to identify values that are significantly low and significantly high? to get credit you must provide an example of each and that example has not been given by any other student.