The wavelength of the electromagnetic wave in carbon tetrachloride is approximately 361 nm.
The speed (v) of a wave is related to its frequency (f) and wavelength (λ) by the equation:
v = f × λ
We are given the frequency (f) of the electromagnetic wave as 7.55 × 10^14 Hz and the speed (v) in carbon tetrachloride as 2.05 × 10^8 m/s.
Rearranging the equation, we can solve for the wavelength (λ):
λ = v / f
Substituting the given values:
λ = (2.05 × 10^8 m/s) / (7.55 × 10^14 Hz)
λ ≈ 2.71 × 10^-7 m
To convert the wavelength to nanometers (nm), we multiply by 10^9:
λ ≈ 2.71 × 10^-7 m × 10^9 nm/m
λ ≈ 271 nm
Therefore, the wavelength of the electromagnetic wave in carbon tetrachloride is approximately 361 nm.
The wavelength of the electromagnetic wave in carbon tetrachloride is approximately 361 nm. This calculation is based on the given frequency and speed of the wave, using the equation relating wavelength, frequency, and speed of the wave.
To know more about Electromagnetic wave visit:
https://brainly.com/question/14953576
#SPJ11
Which of the following is true of the image produced by a single diverging lens? a. The image is real because it is located on the opposite side of the lens from the object
b. The image is virtual because it is located on the opposite side of the lens from the object c. The image is real because it is located on the same side of the lens as the object d. The image is virtual because it is located on the same side of the lens as the object
The image produced by a single diverging lens is virtual because it is located on the same side of the lens as the object.
Hence, the correct option is D.
A diverging lens is a lens that is thinner in the middle and thicker at the edges. When light rays pass through a diverging lens, they are spread apart. This causes the rays to appear to come from a point on the same side of the lens as the object.
As a result, the image formed by a diverging lens is virtual, meaning it cannot be projected onto a screen. Instead, the image can only be seen by looking through the lens.
The image produced by a single diverging lens is virtual because it is located on the same side of the lens as the object.
Hence, the correct option is D.
To know more about diverging lens here
https://brainly.com/question/23094965
#SPJ4
Unpolarized light passes through two ideal Polaroid sheets. The axis of the first is vertical, and the axis of the second is at 30.0∘ to the vertical. What fraction of the incident light is transmitted?
75% of the incident light is transmitted through both ideal Polaroid sheets. When unpolarized light passes through a polarizing sheet, it becomes linearly polarized along the axis of the sheet.
The intensity of polarized light passing through a polarizer is given by Malus' law, which states that the intensity transmitted through a polarizer is proportional to the square of the cosine of the angle between the polarization direction of the incident light and the transmission axis of the polarizer.
In this case, the incident light passes through two ideal Polaroid sheets. The first sheet has a vertical axis, and the second sheet has an axis at 30.0∘ to the vertical. Let's calculate the fraction of the incident light transmitted through both sheets.
First Polaroid sheet:Applying Malus' law again, the intensity transmitted through the second Polaroid sheet is given by:
[tex]I_2 = I_1 * cos^2(30.0^o)[/tex]
Substituting [tex]I_1 = I_0[/tex], we have:
[tex]I_2 = I_0 * cos^2(30.0^o)[/tex]
The fraction of the incident light transmitted through both sheets is given by:
[tex]Fraction_{transmitted} = I_2 / I_0 = cos^2(30.0^o)[/tex]
Using the trigonometric identity [tex]cos^2[/tex](30.0∘) = 3/4, we find:
[tex]Fraction_{transmitted} = 3/4 = 0.75[/tex]
Therefore, 75% of the incident light is transmitted through both ideal Polaroid sheets.
To learn more about Polaroid sheet visit:
brainly.com/question/13099292
#SPJ11
Of EM waves having these wavelengths, which would be visible?
a. 100 nm
b. 500 nm
c. 1000 nm
d. 1 nm
e. none of these
Of EM waves having these wavelengths, the following would be visible: B. 500 nm.
What is an electromagnetic spectrum?In Science, an electromagnetic spectrum is a range of frequencies and wavelengths into which an electromagnetic wave is distributed into.
In Science, the electromagnetic spectrum comprises the following types of energy from highest to lowest frequency and shortest to longest wavelength:
Gamma raysX-raysUltraviolet radiationVisible lightInfrared radiationMicrowavesRadio wavesIn this context, we can infer and logically deduce that an electromagnetic wave with a wavelength of 500 nanometers would be visible because visible light wavelength range is between 380 nanometers and 700 nanometers.
Read more on electromagnetic spectrum here: brainly.com/question/23423065
#SPJ4
1. Design a panel (membrane) absorber that: o utilizes plywood o over its surface area, has resonance frequencies ranging from 45 to 65 Hz o does not extend more than 10-in. from its packing surface
Design of a Plywood Membrane Absorber with Resonance Frequencies from 45 to 65 Hz
In this design, we will create a panel absorber using plywood that meets the following criteria: resonance frequencies ranging from 45 to 65 Hz and a maximum extension of 10 inches from its packing surface.
The absorber will effectively dampen sound waves within this frequency range, providing efficient acoustic treatment.
Determine the dimensions: Let's assume a square-shaped plywood panel with a side length of 24 inches.
Calculate the thickness: To achieve the desired resonance frequencies, we can use the formula for the fundamental resonance frequency of a panel absorber:
f = 2000 * (sqrt(t / (L^2 * ρ))),
where f is the frequency in Hz, t is the thickness of the panel in inches, L is the side length in inches, and ρ is the density of the material in lbs/in^3.
Let's set the resonance frequency to 45 Hz:
45 = 2000 * (sqrt(t / (24^2 * ρ)))
Solving for t, we find:
t = (45^2 * 24^2 * ρ) / 2000^2
For a resonance frequency of 65 Hz, the equation would be the same, but with 65 instead of 45.
Material selection: Choose a plywood thickness that satisfies the above equations for both resonance frequencies. Additionally, ensure the plywood does not extend more than 10 inches from its packing surface.
By following the design specifications outlined above, we can create a plywood membrane absorber that meets the required criteria of resonance frequencies ranging from 45 to 65 Hz and a maximum extension of 10 inches from its packing surface.
This design will effectively dampen sound waves within the specified frequency range, providing efficient acoustic treatment.
To learn more about resonance, visit
https://brainly.com/question/29298725
#SPJ11
w often has the earth gone around the sun ever since you were born? what fraction of an orbit around the sun has pluto completed ever since it was first observed (photographically discovered) in 1930?
Pluto has completed approximately 0.614 of its orbit around the Sun since it was first observed photographically in 1930.
Pluto's orbital period, or the time it takes to complete one orbit around the Sun, is approximately 248 Earth years. Since its discovery in 1930, a total of 93 years have passed.
To calculate the fraction of Pluto's orbit completed, we divide the time since its discovery by its orbital period:
Fraction of orbit completed = (Time since discovery) / (Orbital period)
Fraction of orbit completed = 93 years / 248 years
Fraction of orbit completed ≈ 0.375
Therefore, Pluto has completed approximately 0.375 (or 37.5%) of its orbit around the Sun since its discovery in 1930.
Pluto has completed around 37.5% of its orbit around the Sun since it was first observed photographically in 1930.
To know more about pluto visit:
https://brainly.com/question/27507002
#SPJ11
the average speed of a greyhound bus from lansing to detroit is 102.5 km/h. on the return trip from detroit to lansing the average speed is 51.2 km/h on the same road due to heavy traffic. what is the average speed of the bus for the round trip?
The average speed of the bus for the round trip is approximately 68.37 km/h.
To calculate the average speed for the round trip, we can use the formula:
Average Speed = Total Distance / Total Time
Let's assume the distance between Lansing and Detroit is D km. The time taken for the bus to travel from Lansing to Detroit at an average speed of 102.5 km/h is D/102.5 hours. On the return trip, with an average speed of 51.2 km/h, the time taken will be D/51.2 hours.
The total distance for the round trip is 2D km, as the bus covers the same distance twice (Lansing to Detroit and back to Lansing).
The total time for the round trip is (D/102.5) + (D/51.2) hours.
Now, let's substitute these values into the formula:
Average Speed = 2D / ((D/102.5) + (D/51.2))
To simplify, we can find a common denominator for the fractions:
Average Speed = 2D / ((D*51.2 + D*102.5) / (102.5*51.2))
Simplifying further:
Average Speed = 2D / (D * (51.2 + 102.5) / (102.5 * 51.2))
Average Speed = 2 * (102.5 * 51.2) / (51.2 + 102.5)
Average Speed = 10492 / 153.7
Average Speed ≈ 68.37 km/h
The average speed of the bus for the round trip is approximately 68.37 km/h. This calculation takes into account the different average speeds on the outbound and return journeys.
To know more about speed visit:
https://brainly.com/question/4931057
#SPJ11
a solenoid with a self-inductance has an induced emf described by . which of the given equations describes the current carried by the coil?
a. I = - bt/L + C
b. I = - bt^2 / 2L + C
c. I = - Lb
d. I = - bt/2L +C
A solenoid with a self-inductance has an induced emf. The equation that describes the current carried by the coil in this case is
I = - b[tex]t^{2}[/tex] / 2L + C
Hence, the correct option is B.
This equation represents the current (I) as a function of time (t),
Where
"b" is a constant related to the induced emf,
"L" is the self-inductance of the solenoid,
"C" is the constant of integration.
The term " - b[tex]t^{2}[/tex] / 2L " represents the change in current over time due to the induced emf.
Therefore, A solenoid with a self-inductance has an induced emf. The equation that describes the current carried by the coil in this case is
I = - b[tex]t^{2}[/tex] / 2L + C
Hence, the correct option is B.
To know more about solenoid here
https://brainly.com/question/31307060
#SPJ4
Hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts. True or false?
Answer is true.
Hydrogen can be prepared by suitable electrolysis of aqueous silver salts. True or false?
Answer is false.
How do you solve both of these and what is the difference between the two?
Hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts is true.
This is because,
Hydrogen is produced from water when a direct current is passed through the water. Hydrogen ions are generated at the anode by oxidation of water. Magnesium salts are electrolyzed in the presence of a little sulfuric acid to produce hydrogen gas at the cathode and oxygen gas at the anode. Magnesium hydroxide and magnesium oxide are formed in the anode compartment.2H2O → O2 + 2H2The statement Hydrogen can be prepared by suitable electrolysis of aqueous silver salts is false.
This is because,
This is because silver is an extremely noble metal that is resistant to chemical attack; thus, it is a poor conductor of electricity. As a result, silver is not used in the production of electrolytes. Silver is also used in the purification of electrolyte solutions due to its chemical and physical properties.
Learn more about electrolysis:
brainly.com/question/16929894
#SPJ11
To practice Problem-Solving Strategy 27. 2 Motion in Magnetic Fields. An electron inside of a television tube moves with a speed of 2. 74×107 m/s. It encounters a region with a uniform magnetic field oriented perpendicular to its trajectory. The electron begins to move along a circular arc of radius 0. 190 m. What is the magnitude of the magnetic field?Part CCalculate the magnitude F of the force exerted on the electron by a magnetic field of magnitude 8. 21×10−4 T oriented as described in the problem introduction. Express your answer in newtons
Answer:
Magnetic field strength: approximately [tex]8.20 \times 10^{-4}\; {\rm T}[/tex].
Force on the electron: approximately [tex]3.60 \times 10^{-15}\; {\rm N}[/tex].
Explanation:
Look up the charge and mass of an electron:
The magnitude of charge on an electron is the same as the elementary charge: [tex]q_{e} \approx 1.602 \times 10^{-19}\; {\rm C}[/tex].Electron rest mass: [tex]m_{e} \approx 9.109 \times 10^{-31}\; {\rm kg}[/tex].Since the electron is moving perpendicularly across a magnetic field, magnitude of the magnetic force on this electron would be:
[tex]F = q\, v\, B[/tex],
Where:
[tex]q[/tex] is the magnitude of the electric charge on this electron,[tex]v[/tex] is the speed of the electron, and[tex]B[/tex] is the magnitude of the magnetic field.At the same time, because the electron is in a centripetal motion, magnitude of the net force on the electron should satisfy:
[tex]\displaystyle F_{\text{net}} = \frac{m\, v^{2}}{r}[/tex],
Where:
[tex]m[/tex] is the mass of the electron, [tex]v[/tex] is the speed of the electron, and[tex]r[/tex] is the radius of the circular orbit.Assuming that magnetic force from the field is the only force on this point charge. Net force on the charge would be equal to the magnetic force. In other words:
[tex]\displaystyle \frac{m\, v^{2}}{r} = q\, v\, B[/tex].
Rearrange this equation and solve for the magnetic field strength:
[tex]\begin{aligned}B &= \frac{m\, v}{q\, r} \\ &\approx \frac{(9.109 \times 10^{-31})\, (2.74 \times 10^{7})}{(1.602 \times 10^{-19})\, (0.190)}\; {\rm T} \\ &\approx 8.20 \times 10^{-4}\; {\rm T}\end{aligned}[/tex].
Substitute [tex]B \approx 8.20 \times 10^{-4}\; {\rm T}[/tex] back into the equation [tex]F = q\, v\, B[/tex] to find the magnetic force on this electron:
[tex]\begin{aligned}F &= q\, v\, B \\ &\approx (1.602 \times 10^{-19})\, (2.74 \times 10^{7})\, (8.20 \times 10^{-4})\; {\rm N}\\ &\approx 3.60 \times 10^{-15}\; {\rm N}\end{aligned}[/tex].
an underwater scuba diver sees the sun at an apparent angle of 35.0° from the vertical. what is the actual direction of the sun?
The actual direction of the sun is approximately 46.7° from the vertical, opposite to the apparent direction observed by the scuba diver.
The apparent angle of the sun seen by an underwater scuba diver can be used to determine the actual direction of the sun.
When light passes through a boundary between two different media, such as air and water, it undergoes refraction. Refraction is the bending of light as it travels from one medium to another with a different refractive index.
In this case, as the light from the sun passes from the air into the water, it bends due to refraction. To determine the actual direction of the sun, we need to consider the relationship between the apparent angle and the angle of refraction.
The angle of refraction can be related to the angle of incidence and the refractive indices of the media using Snell's law
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Where n₁ and n₂ are the refractive indices of the initial and final media, and θ₁ and θ₂ are the angles of incidence and refraction, respectively.
In this case, since the scuba diver sees the sun at an apparent angle of 35.0° from the vertical, we can consider the angle of incidence (θ₁) as 35.0°. The refractive indices of air and water are approximately 1.00 and 1.33, respectively.
Using Snell's law, we can calculate the angle of refraction (θ₂). Rearranging the equation, we have
sin(θ₂) = (n₁ / n₂) * sin(θ₁)
sin(θ₂) = (1.00 / 1.33) * sin(35.0°)
sin(θ₂) = 0.75 * sin(35.0°)
θ₂ = arcsin(0.75 * sin(35.0°))
Calculating this value, we find that θ₂ = 46.7°.
Therefore, the actual direction of the sun is approximately 46.7° from the vertical, opposite to the apparent direction observed by the scuba diver.
To know more about sun here
https://brainly.com/question/16903806
#SPJ4
A 20 g ball of clay traveling east at 4.5 m/s collides with a 45 g ball of clay traveling north at 2.0 m/s.
A: What is the speed of the resulting 65 g ball of clay?
Express your answer with the appropriate units.
v = ?
What is the direction of the resulting ball of clay?
theta = ?
Answer:
v= 1.96 m/s and theta= 45°
Explanation:
By using Pythagoras Theorem;
let speed be x
65x=√90^2+90^2
65x=√16200
65x=90√20
x=90√20/65
x=1.96 m/s
To find direction;
let theta be x
tan(x)=90/90
x=tan^-1(90/90)
x=45°
Two sinusoidal waves travelling in opposite directions interfere to produce a standing wave described by the equation
y = (1.5 m) sin (0.400x) cos (200 t)
where, x is in metres and t is in seconds. Determine the wavelength, frequency and speed of the interfering waves.
The wavelength of the interfering waves is 15.7 meters, the frequency is 0.400 Hz, and the speed is 6.28 m/s.
In the equation y = (1.5 m) sin(0.400x) cos(200t), we can observe that the standing wave is a product of two sinusoidal waves traveling in opposite directions.
The equation can be rewritten in the form y = A sin(kx) cos(ωt), where A represents the amplitude, k is the wave number, x is the position, ω is the angular frequency, and t is the time.
Comparing the given equation with the general form, we can deduce the following:
Amplitude (A) = 1.5 m
Wave number (k) = 0.400
Angular frequency (ω) = 200
The wavelength (λ) can be determined using the formula λ = 2π/k. Plugging in the given value of k, we get:
λ = 2π/0.400 ≈ 15.7 meters
The frequency (f) is related to the angular frequency by the equation ω = 2πf. Solving for f, we have:
200 = 2πf
f = 200/(2π) ≈ 0.400 Hz
The speed (v) of a wave is given by the formula v = λf. Substituting the known values, we find:
v = 15.7 meters × 0.400 Hz ≈ 6.28 m/s
The interfering waves have a wavelength of approximately 15.7 meters, a frequency of approximately 0.400 Hz, and a speed of approximately 6.28 m/s.
To learn more about wavelength, visit
https://brainly.com/question/16051869
#SPJ11
determine the ordered pair fo the coordinate axes that identifies the location where the skier rested.e xplain the meanng of this coordinate point in the contect of this problems
The ordered pair that identifies the location where the skier rested on the coordinate axes can be determined. This coordinate point holds significance in understanding the skier's position within the problem.
In order to determine the ordered pair that represents the skier's resting location on the coordinate axes, we need to consider the context of the problem. The coordinate axes consist of two lines, the x-axis and the y-axis, which intersect at the origin (0,0). The x-axis represents horizontal movement, while the y-axis represents vertical movement.
The ordered pair for the skier's resting location will have two values: the x-coordinate and the y-coordinate. The x-coordinate indicates the skier's position along the horizontal axis, while the y-coordinate indicates the skier's position along the vertical axis. For example, if the skier rested at the point (3,2), it means that they were 3 units to the right (or left, if negative) and 2 units above (or below, if negative) the origin.
Understanding the coordinate point in the context of this problem allows us to precisely pinpoint the skier's resting location relative to the coordinate axes. It provides a quantitative representation of the skier's position, aiding in navigation and analysis within the given problem scenario.
Learn more about skier here:
https://brainly.com/question/14031008
#SPJ11
a pinhole camera is made from an 85- cm -long box with a small hole in one end. part a if the hole is 6.0 m from a 1.9- m -tall person, how tall will the image of the person on the film be?
The height of image of the person on the film is determined as 0.267 meters tall.
What is the height of the image formed?The height of the image formed is calculated by applying the formula for magnification of lens.
The given parameters;
Length of the box = 85 cm = 0.85 mDistance from the hole to the person = 6.0 mHeight of the person = 1.9 mThe height of the image formed is calculated as follows;
(person's height) / (distance from person to hole) = (image height) / (distance from image to hole)
1.9 m / 6.0 m = h' / 0.85 m
h' = (1.9 m / 6.0 m) * 0.85 m
h' = 0.267 m
Learn more about magnification here: https://brainly.com/question/1599771
#SPJ4
A charge of 1 nC is uniformly distributed around a ring of radius 10 cm that has its center at the origin and its axis along the x axis. A point charge of 1 nC is located at x = 1 m. Find the work required to move the point charge to the origin. Give your answer in both joules and electron volts.
1 ) J
2) eV
Hence, the work required to move the point charge to the origin is 4.50 × 10⁻²¹ J and 2.81 × 10⁻³ eV.
Given data: Charge around a ring of radius, R = 10 cm = 0.1 m Charge, q = 1 nC = 1 × 10⁻⁹ C Charge located at x = 1 m Charge, Q = 1 n C = 1 × 10⁻⁹ C We need to find the work required to move the point charge to the origin.
Formula used: Potential due to ring with uniformly charged is given as V=K(λR²)/[sqrt(R²+x²)]
Charge present on the ring = Charge/unit length × Circumference of the ringλ = q/2πR
q is the charge on the ring of radius R, so the distance to be moved by the test charge is R (radius).
The total work done can be given as, W = V(q) = V(Q)
The unit of potential energy is Joules(J) and Electron Volt(eV)1 eV = 1.6 × 10⁻¹⁹ Joules
Calculation:
Here, ε₀ = 8.854 × 10⁻¹² C²/N
m² is the permittivity of free space, K = 1/4πε₀ is the Coulomb constant.
Charge per unit length = λ = q/2πR = (1 × 10⁻⁹)/(2π × 0.1) = 1.59 × 10⁻¹⁰ C/m
Potential at a distance of x from the ring is given as, V=K(λR²)/[sqrt(R²+x²)]
Putting the given values,
V=K(λR²)/[sqrt(R²+x²)]
V = 9 × 10⁹ × (1.59 × 10⁻¹⁰ × 0.1²)/[sqrt(0.1²+1²)]
V= 4.50 × 10⁻¹² J/Charge.
Thus, work done,
W = V(Q) = 4.50 × 10⁻¹² J × 1 × 10⁻⁹ C
W= 4.50 × 10⁻²¹ J.
Also, W = (4.50 × 10⁻²¹ J) / (1.6 × 10⁻¹⁹ J/eV) = 2.81 × 10⁻³ eV.
to know more about potential energy visit:
https://brainly.com/question/24284560?
#SPJ11
Two adjacent natural frequencies of an organ pipe are found to be 497 Hz and 639 Hz. (a) Calculate the fundamental frequency HZ (b) Is the pipe is open at both ends or open at only one end? open at both ends open at only one end (c) What is the length of the pipe?
a) The fundamental frequency of the organ pipe is 319.5 Hz. b) The pipe is open at only one end. c) The length of the pipe is approximately 0.536 meters.
(a) To calculate the fundamental frequency (f₁), we can use the formula
f₁ = f₂ / (n + 1)
where f₂ is the higher frequency and n is the number of harmonics between f₁ and f₂.
f₂ = 639 Hz
n = 1
Substituting the values into the formula
f₁ = 639 Hz / (1 + 1)
f₁ = 639 Hz / 2
f₁ = 319.5 Hz
Therefore, the fundamental frequency of the organ pipe is 319.5 Hz.
(b) To determine whether the pipe is open at both ends or open at only one end, we need to analyze the frequency relationship between the harmonics. In a pipe open at both ends, the frequencies of consecutive harmonics are odd multiples of the fundamental frequency. In a pipe open at only one end, the frequencies of consecutive harmonics are odd multiples of the fundamental frequency divided by 2.
Given the frequencies of 497 Hz and 639 Hz, we can observe that the ratio between them is approximately 639/497 ≈ 1.29. This ratio is closer to 1.5 (3/2) than to 1.0, indicating that the pipe is open at only one end.
Therefore, the pipe is open at only one end.
(c) To calculate the length of the pipe, we can use the formula for the length of a pipe open at one end
L = (v / (2f₁))
where L is the length of the pipe, v is the speed of sound in air, and f₁ is the fundamental frequency.
f₁ = 319.5 Hz
v = speed of sound in air (which is approximately 343 m/s at room temperature)
Substituting the values into the formula
L = (343 m/s) / (2 × 319.5 Hz)
L ≈ 0.536 m
Therefore, the length of the pipe is approximately 0.536 meters.
To know more about fundamental frequency here
https://brainly.com/question/31314205
#SPJ4
which expression would you use to find the x-component of the vector?
To find the x-component of a vector, we can use the following expression: x-component = |V| * cos(θ)
Let's assume the vector is represented as V = (Vx, Vy),
where, Vx represents the x-component and
Vy represents the y-component of the vector.
To find the x-component, we need to determine the magnitude of the vector and the angle it makes with the x-axis.
The magnitude of the vector, denoted as |V|, can be calculated using the Pythagorean theorem:
|V| = sqrt(Vx² + Vy²)
Next, we need to find the angle θ the vector makes with the x-axis. We can use the inverse tangent function (arctan) to calculate this angle:
θ = arctan(Vy / Vx)
Finally, we can find the x-component of the vector by multiplying the magnitude of the vector by the cosine of the angle θ:
x-component = |V| * cos(θ)
The x-component of a vector can be obtained by multiplying the magnitude of the vector by the cosine of the angle it makes with the x-axis. The formula can be summarized as follows:
x-component = magnitude of the vector * cosine of the angle it makes with the x-axis or
x-component = |V| * cos(θ)
To know more about vector visit:
https://brainly.com/question/356987
#SPJ11
If redshifts for observed galaxies at a given distance turned out to be twice as large, what would be the effect on the Hubble constant?
The value of the Hubble constant would not change
The value of the Hubble constant would be twice its current value
The value of the Hubble constant would be half its current value
The value of the Hubble constant would be four times its current value
If the redshifts for observed galaxies at a given distance were twice as large, the value of the Hubble constant would not change.
The Hubble constant, denoted as H0, is a measure of the rate at which the universe is expanding. It relates the recession velocity of galaxies to their distance. The redshift of a galaxy is a measure of how much its light has been stretched to longer wavelengths as the universe expands. It is directly proportional to the galaxy's recession velocity.
When the redshifts of galaxies at a given distance are twice as large, it means that their recession velocities are also doubled. However, the Hubble constant is defined as the ratio of recession velocity to distance. Since both the numerator (recession velocity) and the denominator (distance) have increased by the same factor of 2, their ratio remains unchanged. Therefore, the value of the Hubble constant would not change in this scenario.
In summary, if the redshifts for observed galaxies at a given distance were twice as large, the value of the Hubble constant would remain the same. The Hubble constant represents the ratio of recession velocity to distance, and while the recession velocities would double, the distances would also double, resulting in an unchanged value for the Hubble constant.
To learn more about Hubble constant refer:
https://brainly.com/question/31785853
#SPJ11
You are testing a small flywheel (radius 0.166 m) that will be used to store a small amount of energy. The flywheel is pivoted with low-friction bearings about a horizontal shaft through the flywheels center. A thin, light cord is wrapped multiple times around the rim of the flywheel. Your lab has a device that can apply a specified horizontal force F to the free end of the cord. The device records both the magnitude of that force as a function of the horizontal distance the end of the cord has traveled and the time elapsed since the force was first applied. The flywheel is initially at rest.
F (N) 60.0 40.0 20.0 d (m) 0 2.00 4.006.00
A) You start with a test run to determine the flywheels moment of inertia I. The magnitude F of the force is a constant 41.0 N, and the end of the rope moves 8.35 m in 2.00 s. What is I?
B) In a second test, the flywheel again starts from rest but the free end of the rope travels 6.00 m; (Figure 1) shows the force magnitude F as a function of the distance d that the end of the rope has moved. What is the kinetic energy of the flywheel when d = 6.00 m?
C) What is the angular speed of the flywheel, in rev/min, when d = 6.00 m?
A) The moment of inertia (I) is 86.46 kg·m^2. B) The kinetic energy (K) when d = 6.00 m is 7777.14 J. C) The angular speed, when d = 6.00 m, is 57.30 rev/min.
A) To determine the moment of inertia (I) of the flywheel, we can use the equation:
I = (F * d^2) / (4π^2 * t^2)
where F is the constant force (41.0 N), d is the distance traveled (8.35 m), and t is the time elapsed (2.00 s).
Plugging in the given values, we have:
I = (41.0 * (8.35)^2) / (4π^2 * (2.00)^2)
I ≈ 86.46 kg·m^2
B) The kinetic energy (K) of the flywheel can be calculated using the formula:
K = (1/2) * I * ω^2
where I is the moment of inertia and ω is the angular speed.
Since the flywheel starts from rest, its initial angular speed (ω_i) is 0. When the free end of the rope travels 6.00 m, we can find the final angular speed (ω_f) using the equation:
d = ω_i * t + (1/2) * α * t^2
where d is the distance traveled (6.00 m), t is the time elapsed, and α is the angular acceleration. Since ω_i = 0, the equation simplifies to:
d = (1/2) * α * t^2
Solving for α:
α = (2 * d) / t^2
α = (2 * 6.00) / (2.00)^2
α = 3.00 rad/s^2
Now, we can calculate the final angular speed:
ω_f = ω_i + α * t
ω_f = 0 + 3.00 * 2.00
ω_f = 6.00 rad/s
Finally, we can substitute the values into the kinetic energy formula:
K = (1/2) * I * ω_f^2
K = (1/2) * 86.46 * (6.00)^2
K ≈ 7777.14 J
C) To convert the angular speed to rev/min, we can use the conversion factor:
1 rev = 2π rad
Therefore, the angular speed in rev/min is:
ω_f_rev_min = (ω_f * 60) / (2π)
ω_f_rev_min = (6.00 * 60) / (2π)
ω_f_rev_min ≈ 57.30 rev/min
A) The moment of inertia (I) of the flywheel is approximately 86.46 kg·m^2.
B) The kinetic energy (K) of the flywheel when d = 6.00 m is approximately 7777.14 J.
C) The angular speed of the flywheel, when d = 6.00 m, is approximately 57.30 rev/min.
To learn more about inertia, visit
https://brainly.com/question/1830739
#SPJ11
two objects attract each other with a gravitational force of magnitude 1.02 10-8 n when separated by 19.9 cm. if the total mass of the two objects is 5.05 kg, what is the mass of each?
The masses of the two objects that attract each other with a gravitational force are 1.505 kg and 3.545 kg, respectively.
What is gravitational force?
Gravitational force is the force of attraction that exists between objects with mass. It is described by Newton's law of universal gravitation, which states that the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers.
To determine the mass of each object, we can use Newton's law of universal gravitation:
F = (G * m₁ * m₂) / r²
Where:
F is the gravitational force
G is the gravitational constant (approximately 6.67430 × 10⁻¹¹ N m²/kg²)
m₁ and m₂ are the masses of the two objects
r is the distance between the centers of the two objects
Given:
F = 1.02 × 10⁻⁸ N
r = 19.9 cm = 0.199 m
Total mass (m₁ + m₂) = 5.05 kg
We need to solve for the individual masses, so let's assume m₁ = x and m₂ = (5.05 - x), where x represents the mass of one of the objects.
Plugging these values into the equation, we have:
1.02 × 10⁻⁸ = (6.67430 × 10⁻¹¹ * x * (5.05 - x)) / (0.199)²
Simplifying the equation:
1.02 × 10⁻⁸ = (6.67430 × 10⁻¹¹ * x * (5.05 - x)) / 0.039601
Cross-multiplying and rearranging:
1.02 × 0.039601 = 6.67430 × 10⁻¹¹ * x * (5.05 - x)
0.04033002 = 6.67430 × 10⁻¹¹ * (5.05x - x²)
0.04033002 = 33.7358 × 10⁻¹¹ * x - 6.67430 × 10⁻¹¹ * x²
Rearranging the equation to a quadratic form:
6.67430 × 10⁻¹¹ * x² - 33.7358 × 10⁻¹¹ * x + 0.04033002 = 0
Now we can solve this quadratic equation to find the value of x, representing the mass of one of the objects.
Using the quadratic formula:
x = (-b ± √(b² - 4ac)) / 2a
For the given equation:
a = 6.67430 × 10⁻¹¹
b = -33.7358 × 10⁻¹¹
c = 0.04033002
Substituting these values into the quadratic formula:
x = (33.7358 × 10⁻¹¹ ± √((-33.7358 × 10⁻¹¹)² - 4 * (6.67430 × 10⁻¹¹) * (0.04033002))) / (2 * (6.67430 × 10⁻¹¹))
Using a calculator, we find two solutions:
x ≈ 1.505 kg (rounded to three decimal places)
x ≈ 3.545 kg (rounded to three decimal places)
Therefore, the masses of the two objects that attract each other with a gravitational force are 1.505 kg and 3.545 kg, respectively.
To learn more about gravitational force,
https://brainly.com/question/29276623
#SPJ4
a battery is connected to two capacitors shown below. the capacitors have air between the plates. capacitor 1 has a plate area of 1.5cm2 and an electric field between its plates of 2000v/m. capacitor 2 has a plate area of 0.7 cm2 and an electric field of 1500v/m. what is the total charge coming out of the power supply?
A battery is connected to two capacitors shown below. the capacitors have air between the plates. The total charge coming out of the power supply: 8.16 × 10⁻⁹ C.
Capacitor 1 has a plate area of 1.5 cm² and an electric field between its plates of 2000 V/m and Capacitor 2 has a plate area of 0.7 cm² and an electric field of 1500 V/m.
Therefore, the total charge coming out of the power supply can be calculated by using the following formula:
Q = C × V,
where Q is the total charge coming out of the power supply.
C is the capacitance of the capacitors.
V is the voltage of the capacitors.
The capacitance of a parallel plate capacitor can be calculated by using the following formula:
C = εA/d,
where C is the capacitance of the capacitor.
ε is the permittivity of air.
A is the area of the capacitor plates.
d is the distance between the plates of the capacitor.
let's calculate the capacitance of the capacitors:
For capacitor 1:
ε = ε₀ = 8.85 × 10⁻¹² F/m²
A = 1.5 cm² = 1.5 × 10⁻⁴ m²d = ?
E = 2000 V/mQ = CV
C = εA/dC₁ = ε₀A/d
C₁ = ε₀A/E₁
C₁ = ε₀A/(V/d)
C₁ = (ε₀A/d) × V⁻¹
C₁ = ε₀A₁/E₁
C₁ = (8.85 × 10⁻¹² F/m²)(1.5 × 10⁻⁴ m²)/(2000 V/m)
C₁ = 6.63 × 10⁻¹⁰ F
For capacitor 2:
ε = ε₀ = 8.85 × 10⁻¹² F/m²
A = 0.7 cm² = 0.7 × 10⁻⁴ m²
d = E = 1500 V/m
Q = CV
C = εA/d
C₂ = ε₀A/d
C₂ = ε₀A/E₂
C₂ = (8.85 × 10⁻¹² F/m²)(0.7 × 10⁻⁴ m²)/(1500 V/m)
C₂ = 3.95 × 10⁻¹¹ F
Total charge coming out of the power supply: Q = C₁V + C₂VQ = (6.63 × 10⁻¹⁰ F)(12 V) + (3.95 × 10⁻¹¹ F)(12 V)Q = 8.16 × 10⁻⁹ C. Therefore, the total charge coming out of the power supply is 8.16 × 10⁻⁹ C.
To know more about power supply, refer here:
https://brainly.com/question/32460638#
#SPJ11
Two coils, held in fixed positions, have a mutual inductance of 100 μH. What is the peak emf in one coil when the current in the other coil is i(t) = 10.0 sin (1.00 × 103t), where i is in amperes and t is in seconds?
The peak emf in one coil is 1 V.
The mutual inductance (M) between two coils relates the change in current in one coil to the induced emf in the other coil. It is given that the mutual inductance between the coils is 100 μH (microhenries), which can be expressed as 100 × 10^(-6) H.
The current in the second coil is given by i(t) = 10.0 sin(1.00 × 10^3t) A. To find the induced emf in the first coil, we can use Faraday's law of electromagnetic induction, which states that the induced emf (e) is equal to the negative rate of change of magnetic flux (Φ) through the coil.
Since the coils are held in fixed positions, the magnetic flux through the first coil is proportional to the current in the second coil. Therefore, we can write:
e = -M * (di(t)/dt)
Taking the derivative of the current function with respect to time:
di(t)/dt = 10.0 * 1.00 × 10^3 * cos(1.00 × 10^3t)
Substituting the values into the equation:
e = -100 × 10^(-6) * (10.0 * 1.00 × 10^3 * cos(1.00 × 10^3t))
To find the peak emf, we consider the maximum value of the cosine function, which is 1. Therefore:
e = -100 × 10^(-6) * (10.0 * 1.00 × 10^3 * 1)
e = -1 V
Since the emf is negative, the peak emf in the first coil is 1 V in the opposite direction of the current in the second coil.
The peak emf induced in one coil, when the current in the other coil is described by i(t) = 10.0 sin(1.00 × 10^3t) A, is 1 V in the opposite direction.
To know more about electromagnetic visit :
https://brainly.com/question/13874687
#SPJ11
energy is required to move a 1430 kg mass from the earth’s surface to an altitude 1.52 times the earth’s radius re. what amount of energy is required to accomplish this move?
Therefore, the amount of energy required to move a 1430 kg mass from the Earth’s surface to an altitude 1.52 times the Earth’s radius is approximately 2.28 x 10¹¹ J.
The amount of energy required to move a 1430 kg mass from the Earth’s surface to an altitude 1.52 times the Earth’s radius can be calculated using the formula for gravitational potential energy which is given by:
U = mgh
where U is the gravitational potential energy, m is the mass of the object, g is the acceleration due to gravity and h is the height above the reference level.
In this case, the reference level is the Earth’s surface and the height above this level is equal to:
h = (1.52) ₓ (6378.1 km) - 6378.1 km
h ≈ 1635.3 km
The acceleration due to gravity at the Earth’s surface is approximately 9.81 m/s².
Now we can substitute these values into the formula for gravitational potential energy:
U = mgh
U = (1430 kg)(9.81 m/s²)(1635300 m)
U ≈ 2.28 x 10¹¹ J
Therefore, the amount of energy required to move a 1430 kg mass from the Earth’s surface to an altitude 1.52 times the Earth’s radius is approximately 2.28 x 10¹¹ J.
To know more about gravitational potential energy
https://brainly.com/question/15896499
#SPJ4
A package is dropped from the plane which is flying with a constant horizontal velocity of va = 150 ft/s. Determine the normal and tangential components of acceleration and the radius of curvature of the path of motion (a) at the moment the package is released at a, where it has a horizontal velocity va = 150 ft/s, and (b) just before it strikes the ground at
b
Given, va = 150 ft/sHorizontal velocity, vx = 150 ft/s As the package is only dropped from the plane and there is no force acting on it, except gravity.Therefore, acceleration will be caused only due to gravity.The acceleration due to gravity is [tex]g = 32.17 ft/s²[/tex].
Acceleration can be divided into two components, namely, normal acceleration and tangential acceleration.a. The moment the package is released at a, where it has a horizontal velocity va = 150 ft/sThe normal component of acceleration can be given as:
[tex]an = g = 32.17 ft/s²[/tex]
The tangential component of acceleration can be given as:at = 0, as the horizontal velocity remains constant throughout the motion. The radius of curvature can be given as:
[tex]r = v² / an = vx² / g= 150² / 32.17 = 702.6 ft.b[/tex].
Just before it strikes the groundThe normal component of acceleration can be given as:
[tex]an = g = 32.17 ft/s²[/tex]
The tangential component of acceleration can be given as:
at = g×sinθ, where θ is the angle of inclination of velocity vector with the horizontal line.Therefore, the tangential component of acceleration can be given as:
[tex]at = g×sinθ= 32.17×sin[tan⁻¹(32.17×t / 150)][/tex]
The radius of curvature can be given as:
[tex]r = v² / an = [vx² + (vy)²] / g= [150² + (32.17t)²] / 32.17[/tex]
Note: Please note that the final answers should be rounded off to two decimal places and the units of acceleration and radius should be given as ft/s² and ft respectively.
To know more about tangential visit :
https://brainly.com/question/12706657
#SPJ11
The initial and final volumes during the process were Vi = 5 L and Vf = (Vi/2) L, respectively. If p0 = 4.4 atm⋅L6/5, find the amount of work done on the gas, in joules.
The amount of work done on the gas is approximately 7.92 J (joules). . It is important to note that the negative sign in the formula indicates a decrease in volume, resulting in work being done on the gas.
The work done on a gas can be calculated using the formula:
W = -PΔV
Where:
W is the work done on the gas,
P is the pressure,
ΔV is the change in volume.
Given:
Initial volume (Vi) = 5 L
Final volume (Vf) = (Vi/2) L
= (5/2) L
= 2.5 L
Pressure (P0) = 4.4 atm⋅L^(6/5)
The change in volume is calculated as:
ΔV = Vf - Vi
ΔV = 2.5 L - 5 L
ΔV = -2.5 L
The negative sign indicates a decrease in volume.
Substituting the values into the formula for work done:
W = -PΔV
W = -(4.4 atm⋅L^(6/5)) * (-2.5 L)
W = 4.4 * 2.5 * atm⋅L^(6/5)
W = 11 * atm⋅L^(6/5)
To convert the work from atm⋅L^(6/5) to joules, we need to use the conversion factor 1 atm⋅L = 101.325 J:
W = 11 * atm⋅L^(6/5) * 101.325 J / atm⋅L
W = 1114.575 * L^(6/5) J
Now we substitute the volume values:
W = 1114.575 * (2.5 L)^(6/5)
W = 1114.575 * 2.5^(6/5) J
W ≈ 1114.575 * 2.676 J
W ≈ 2981.4 J
Rounding to two significant figures, the amount of work done on the gas is approximately 7.92 J.
The amount of work done on the gas, given an initial volume of 5 L, a final volume of 2.5 L, and a pressure of 4.4 atm⋅L^(6/5), is approximately 7.92 J. This value is calculated using the formula for work done on a gas, where the pressure and change in volume are multiplied together.
The work is then converted from atm⋅L^(6/5) to joules using the conversion factor of 1 atm⋅L = 101.325 J. It is important to note that the negative sign in the formula indicates a decrease in volume, resulting in work being done on the gas.
To know more about volume ,visit:
https://brainly.com/question/14197390
#SPJ11
Given that the mass of the earth is 5.97 X 10 24 kg and its radius length is 6.34 X 10'
6 m Then find the tension of gravitational field of earth to a body of mass 1000 kg putting on the ground surface
The tension of the gravitational field of the earth to a body of mass 1000 kg putting on the ground surface is 9810 N.
The tension of the gravitational field of the earth to a body of mass 1000 kg putting on the ground surface is given by the formula:
Weight (W) = mg
where g is the acceleration due to gravity at the surface of the earth and m is the mass of the body.
We can find g using the formula:
Tension of gravitational field of earth (g) = GM/r²
where G is the gravitational constant (6.67 x 10⁻¹¹ Nm²/kg²), M is the mass of the earth (5.97 x 10²⁴ kg), and r is the radius length of the earth (6.34 x 10⁶ m).
So, substituting the given values, we have:
g = (6.67 x 10⁻¹¹Nm²/kg² × 5.97 x 10²⁴ kg)/(6.34 x 10⁶ m)²g = 9.81 m/s² (approximately)
Therefore, the weight of the body of mass 1000 kg putting on the ground surface would be:
W = mg
W = 1000 kg × 9.81 m/s²
W = 9810 N
Learn more about gravitation at:
https://brainly.com/question/13866204
#SPJ11
Which of the following statements about the 2-approximate algorithm for the metric undirected traveling salesman problem (MUTSP) is correct? O By traversing the edges of a spanning tree in an appropriate order, we build a tour which may visit some vertices more than once and whose total cost is exactly twice as large as the cost of the spanning tree O The cost of a minimum-cost spanning tree is at least as large as the cost of an MUTSP solution O When applied to a graph where the triangle inequality is not satified, the algorithm still leads to a 2-approximate solution.
The correct statement about the 2-approximate algorithm for the metric undirected traveling salesman problem (MUTSP) is: "When applied to a graph where the triangle inequality is not satisfied, the algorithm still leads to a 2-approximate solution."
The 2-approximate algorithm for the MUTSP involves constructing a minimum-cost spanning tree and then traversing its edges in a specific order to create a tour. However, this algorithm does not guarantee an optimal solution.
The first statement, "By traversing the edges of a spanning tree in an appropriate order, we build a tour which may visit some vertices more than once and whose total cost is exactly twice as large as the cost of the spanning tree," is incorrect.
The tour constructed by the algorithm may visit some vertices more than once, but its total cost is not exactly twice as large as the cost of the spanning tree.
The second statement, "The cost of a minimum-cost spanning tree is at least as large as the cost of an MUTSP solution," is also incorrect.
The cost of a minimum-cost spanning tree is generally smaller than the cost of an MUTSP solution, as the MST only considers the connectivity of the graph and not the requirement to visit all vertices.
The correct statement is the third one: "When applied to a graph where the triangle inequality is not satisfied, the algorithm still leads to a 2-approximate solution."
The triangle inequality states that the direct distance between two vertices in a graph is always shorter than or equal to the sum of the distances through any intermediate vertex.
Despite violating the triangle inequality, the 2-approximate algorithm still guarantees a solution whose cost is at most twice the cost of an optimal solution for the MUTSP.
The 2-approximate algorithm for the MUTSP provides a solution that is guaranteed to be at most twice the cost of an optimal solution, even when applied to graphs where the triangle inequality is not satisfied.
To know more about algorithm visit:
https://brainly.com/question/30453328
#SPJ11
An electron is located on a pinpoint having a diameter of 2.5 μm. What is the minimum uncertainty in the speed of the electron?
The minimum uncertainty in the speed of the electron is approximately 2.61 x 10^5 m/s.
According to the Heisenberg uncertainty principle, there is a fundamental limit to how precisely both the position and momentum of a particle can be known simultaneously. The uncertainty principle is expressed mathematically as:
Δx * Δp ≥ h/2π
Where Δx is the uncertainty in position, Δp is the uncertainty in momentum, and h is Planck's constant (6.62607015 × 10^(-34) J·s).
In this case, we are given the diameter of the pinpoint, which represents the uncertainty in position. To determine the uncertainty in speed, we need to convert the position uncertainty to momentum uncertainty and then relate it to speed.
The uncertainty in position (Δx) is equal to half the diameter of the pinpoint:
Δx = 2.5 μm / 2
= 1.25 μm
= 1.25 × 10^(-6) m
To calculate the uncertainty in momentum, we can use the equation:
Δp = mΔv
Where Δv is the uncertainty in velocity and m is the mass of the electron.
The mass of an electron (m) is approximately 9.10938356 × 10^(-31) kg.
Now, we can express the uncertainty principle in terms of speed (v) by dividing both sides of the equation by the mass:
Δv = Δp / m
Substituting the given values:
Δv = (1.25 × 10^(-6) m) / (9.10938356 × 10^(-31) kg)
Calculating this expression gives us:
Δv ≈ 1.37 × 10^24 m/s
However, this result represents the uncertainty in velocity. To find the uncertainty in speed, we take the absolute value of the uncertainty in velocity:
Δv ≈ |1.37 × 10^24 m/s|
≈ 1.37 × 10^24 m/s
So, the minimum uncertainty in the speed of the electron is approximately 2.61 × 10^5 m/s.
The minimum uncertainty in the speed of the electron, based on the uncertainty in position (diameter of the pinpoint), is approximately 2.61 × 10^5 m/s.
To know more about Electron visit:
https://brainly.com/question/860094
#SPJ11
A hydrogen atom in the ground state absorbs a 12.75 eV photon. Immediately after the absorption, the atom undergoes a quantum jump to the next-lowest energy level.
What is the wavelength of the photon emitted in this quantum jump?
Express your answer using four significant figures.
I've seen this question before, but I'm looking the wavelength, not the energy, or n. Thanks!
The wavelength of the absorbed photon that makes a hydrogen atom in the ground state undergo a quantum jump to the next-lowest energy level is 97.32 nm.
When an electron jumps to a higher energy level, it absorbs energy. When an electron falls to a lower energy level, it emits energy in the form of light. The absorbed photon has the precise amount of energy needed to enable the electron to jump to a higher energy level. Similarly, the emitted photon has the same amount of energy as the electron's energy difference as it drops to a lower energy level.
For a hydrogen atom, the energy of an electron in a particular energy level is given by: E_n = -13.6/n^2 electron volts where n is an integer representing the energy level. When the atom absorbs a 12.75 eV photon, the electron moves from the ground state (n = 1) to the first excited state (n = 2). The energy absorbed by the atom is equal to the energy of the photon since there is no energy loss during absorption. The change in energy is ΔE = E_2 - E_1 = -3.40 eV. Since the energy of a photon is given by E = hc/λ, where h is Planck's constant and c is the speed of light, we can use it to determine the wavelength of the absorbed photon as:hc/λ = ΔEλ = hc/ΔE = 97.32 nm (four significant figures).
Know more about hydrogen atom, here:
https://brainly.com/question/29661778
#SPJ11
Which of the Uranian moons displays the widest range of surface terrains, suggesting some catastrophic disruption?
Miranda, one of Uranus's moons, displays the widest range of surface terrains, suggesting some catastrophic disruption.
Miranda is the smallest and innermost of the five major moons of Uranus. It is known for its highly varied and fragmented surface, which indicates a history of intense geological activity.
The range of surface terrains observed on Miranda suggests that it has undergone significant cataclysmic disruptions in its past.
One prominent feature on Miranda is the "Coronae," which are large and distinct regions of tectonic activity. These coronae are characterized by parallel ridges and valleys that have been folded and deformed, indicating intense geological forces.
The presence of these coronae suggests that Miranda experienced extreme tectonic activity, likely as a result of past catastrophic disruptions.
Another noteworthy feature on Miranda is the "Verona Rupes," a massive cliff that reaches heights of up to 20 kilometers (12 miles). This cliff is one of the tallest known in the solar system, suggesting significant tectonic forces that may have caused the crust to crack and shift, resulting in such a dramatic geological feature.
The wide range of surface terrains observed on Miranda, including the presence of coronae and the massive Verona Rupes cliff, strongly indicates that this moon has experienced catastrophic disruptions in its past.
These disruptions likely involved intense tectonic activity, resulting in the deformation and fragmentation of Miranda's surface. The unique geological features on Miranda provide valuable insights into the complex history and dynamics of the Uranian moon system.
To know more about Miranda visit:
https://brainly.com/question/28209025
#SPJ11