A child slides down a hill on a toboggan with acceleration of 1.8 m/s2. if she starts from rest, how far has she traveled in:

Answer:

11.479 kilometres per litre

Explanation:

for an approximate result, divide the fuel economy value by 2.352

27 miles per gallon is equivalent to approximately 6.09 kilometers per liter.

A statement of the connection between units that are used to alter the units of a measured quantity without affecting the value is called a conversion factor. A conversion ratio (or unit factor), if the numerator and denominator have the same value represented in various units, always equals one (1).

To convert 27 miles per gallon to kilometers per liter, we need to use conversion factors:

1 mile = 1.60934 kilometers

1 gallon = 3.78541 liters

So, first we convert miles to kilometers:

27 miles * 1.60934 km/mile = 43.45218 kilometers

Then we convert gallons to liters:

1 gallon = 3.78541 liters

27 miles per gallon = 27 miles / 1 gallon = 27 / 3.78541 liters/mile = 7.13888 liters/kilometer

Finally, we divide the distance traveled in kilometers by the amount of fuel used in liters:

43.45218 km / 7.13888 liters = 6.09023 kilometers per liter

Therefore, 27 miles per gallon is equivalent to approximately 6.09 kilometers per liter.

Learn more about unit conversion here:

https://brainly.com/question/19420601

#SPJ2

Answer:

About 13, 000,000,000,000,000,000,000,000 pounds.

Explanation:

Answer:

6,000,000,000, 000,000,000,000,000 kilograms (6 x 1024 kilograms, or 1.3 x 1025 pounds).

Answer:

11.3 km/sec * 1000 m/km / 1609 m/mi = 7.02 mi / sec

7.02 mi/sec * 3600 sec / hr = 25,300 mph

The value of the speed needed to escape the pull of Earth's gravity in miles per hour (mi/h) is 25282.8.

Given the following data;

In this exercise, you're required to convert the value of the speed needed to escape the pull of Earth's gravity in kilometer per seconds (km/s) to miles per hour (mi/h).

Conversion:

1 mile = 1.609 kilometer

X mile = 11.3 kilometer

Cross-multiplying, we have;

[tex]1.609[/tex] × X = [tex]11.3[/tex]

[tex]X = \frac{11.3}{1.609}[/tex]

X = 7.0230 miles

Since we know that one (1) hour is equal to 3600 seconds, we would multiply the value of X by 3600 in order to convert it to miles per hour (mi/h).

X = 7.0230 × 3600

X = 25282.8 mi/h

Therefore, the value of the speed needed to escape the pull of Earth's gravity in miles per hour (mi/h) is 25282.8.

Find more information: brainly.com/question/24457218

Explanation:

Always behave responsibly in the laboratory. Do not run around or play practical jokes. Always check the safety data of any chemicals you are going to use. Never smell, taste or touch chemicals unless instructed to do so.

Answer:

In a biology experiment the number of yeast cells is determined after 24 hours of culture at different temperatures. a) Identify the independent and dependent variables in the experiment. b) Draw the graph of the

Explanation:

momentum can also be defined in terms of newton second

that is P=F.V

now v =vf-vi

v=3 m/s-1m/s=2 m/s

now F=W=45 kg

therefore

change in momentum=F.v

P=45*2=90 kg.m/s

Answer:

Explanation:

a. time 0 = 0

time 5 = 5

c. all values are equilvalents.

b. slope is x = y

Answer:

Choice A) A Plant cell

Explanation:

Answer:

Zero.

Explanation:

Given that a rock is thrown vertically upward at an initial velocity of 70 m/s. What is the approximate acceleration of the rock when it reaches its maximum height

(assume upward is the positive y direction)?

Since the reached the maximum height, the final velocity V will be equal to zero.

Using the first equation of motion to find the time.

And since it is a vertical direction, and not horizontal, the acceleration a will be equal to zero.

Answer:

A.) 42.7 m/s

B.) 0.33 m/s^2

C.) 90 kg

Explanation:

A.) If Justin races his Chevy S-10 down highway 37 north for 2,560 meters in 60 seconds, what is his velocity? 

Velocity = displacement/time

Velocity = 2560/60

Velocity = 42.67 m/s

B.) The Chevy S-10 started rounding at 10 meters per hour. What is the acceleration at 30 seconds on the highway?

Acceleration = velocity/time

Acceleration = 10/30

Acceleration = 0.33 m/s^2

C.) The S-10 has a force of 30 N. What is the mass of the car?

Force = mass × acceleration

30 = mass × 0.33

Mass = 30/ 0.33

Mass = 90 kg

Answer:

The resistance of the tungsten coil at 80 degrees Celsius is 15.12 ohm

Explanation:

The given parameters are;

The resistance of the tungsten coil at 15 degrees Celsius = 12 ohm

The temperature coefficient of resistance of tungsten = 0.004/°C

The resistance of the tungsten coil at 80 degrees Celsius is found using the following relation;

R₂ = R₁·[1 + α·(t₂ - t₁)]

Where;

R₁ = The resistance at the initial  temperature = 12 ohm

R₂ = The resistance of tungsten at the final temperature

t₁ = The initial temperature = 15 degrees Celsius

t₂ = The final temperature = 80 degrees Celsius

α = temperature coefficient of resistance of tungsten = 0.004/°C

Therefore, we have;

R₂ = 12×[1 + 0.004×(80 - 15)] = 15.12 ohm

The resistance of the tungsten coil at 80 degrees Celsius = 15.12 ohm.

Answer:

F = 8840.7 N

Explanation:

The parameters given are:

Length L = 3 metres

Extension e = 3 × 3 = 9m

Force constant K = 982.3 Newton per metre​

From Hook's law,

Provided the elastic limit is not extended, the extension is directly proportional to the force applied.

That is,

F = Ke

Substitute all the parameters into the formula

F = 982.3 × 9

F = 8840.7 N

Answer:

78

Explanation:

Answer:

78

Explanation:

dakaylaRiley 12

The spring balance provides a mass measurement

Answer:

mass

Explanation:

The mass is hung on the end of a spring, and the deflection of the spring due to the downwards gravitational force on the mass is measured against a scale.

Answer:

both

Explanation:

because science is not included in both of them

probably a little late on this but the dude got everything wrong heres a screenshot of the answers.

Solubility: the ability of a substance to dissolve in another.

Density: the amount of mass in a given volume.

Buoyant force: the upward force on an object in a fluid.

Conductivity: the ability of a substance to transfer heat or electricity.

Boiling point: the temperature at which a liquid becomes a gas.

Solubility can be defined as a measure of how readily a substance dissolves in a solvent to form a solution.

Density can be defined as mass all over the volume of an object.

Buoyancy can be defined as an upward force created by the fluid (liquid) displaced by an object.

Conductivity can be defined as the ability of an object, substance or body to transfer heat or electricity to another.

Boiling point is the temperature at which a physical matter changes phase from liquid to gas.

Find more information here: https://brainly.com/question/21371565

Answer:

"Faster" is most likely the answer, I'm not 100% sure though

Answer:

100 watt

Watt is a unit of power, for the light bulb its produces or consumes 100 watts of power

Answer:

100w means the power consumed by the electric bulb

Answer:

Explanation:

distance= 3.1 mile

time=0.5 hours

s=d/t

s=3.1/0.5

speed= 6.2 m/hr

If you run for a distance of 3.1 miles in 0.5 hours, then the speed in miles per hour will be 6.2 m/hr.

A scalar quantity in kinematics and common usage, an object's speed is the size of the change in its position over time or the amount of change in its position per unit of time.

As the duration of the time interval approaches zero, the instantaneous speed is the maximum limit of the average speed. The distance traveled divided by the duration of the interval represents the average speed of an object over a period of time.

Given information,

Distance covered, d = 3.1 miles

Time taken, t = 0.5 hours

Speed = [tex]Distance/time[/tex]

Speed  = 3.1/0.5

Speed = 6.2 m/hr

Therefore, the speed while running is 6.2 m/hr.

To know more about Speed :

https://brainly.com/question/7359669

#SPJ2

Answer:

the answer is c. Havanna's soccer ball has 9 times the kinetic energy, because it travels at 3 times the speed

Explanation:

Answer:

because it helps data to be meaningful

Explanation:

I took a test and and got 100%

Answer:

9.2 cm

Explanation:

on a ruler you can only measure in cm

and the precision is of one decimal point

Answer:

Density=mass/volume.

8.96=98.2/volume.

volume=98.2/8.96=10.95982143 ~ 11cm^3.

The volume of a sample of copper of 98.2 g would be 10.95 ml if the density of copper is 8.96 g/mL.

It can be defined as the mass of any object or body per unit volume of the particular object or body. Generally, it is expressed as in gram per cm³ or kilogram per meter³.

Due to their superior electrical and thermal conductivities, remarkable resistance to corrosion, and simplicity of production, copper alloys are frequently employed. In general, copper alloys are not magnetic. Electrical wire, cable, contacts, and other components.

As given in the problem the density of copper is 8.96 g/mL, and we have to find the volume occupied by the sample of copper.

mass = density×volume

98.2 g  = 8.96 g/mL×volume

volume =98.2/8.96

            =10.95 ml

Thus, the volume of a 98.2 g sample of copper would be 10.95 ml.

Learn more about density from here,

brainly.com/question/15164682

#SPJ2

Answer:

Explanation:

18 km / h

= 300 m / min

12 km / h = 200 m / min

distance travelled in 200 minutes = 300 x 200 = 60000 m

distance travelled in 50 minute in return journey = 200 x 50 = 10000 m

total distance travelled = 70000 m

total time = 250 minute

speed = 70000 / 250

= 280 m / min

= 16.8 km / h

Total displacement = 60000 - 10000 = 50000 m

total time = 250 min

velocity = 50000 / 250

= 200 m / min

= 12 km / h

Answer:

A.) r = 2t

B.) V = 33.5t^3

Explanation:

Given that a spherical balloon is being inflated and the radius of the balloon is increasing at a rate of 2 cm/s

A) Express the radius (r) of the balloon as a function of the time (t).

Since the rate = 2 cm/s that is,

Rate = radius/ time

Therefore,

2 = r/t

Make r the subject of formula

r = 2t

(B) If V is the volume of the balloon as a function of the radius, find V or and interpret it.

Let assume that the balloon is spherical. Volume of a sphere is;

V = 4/3πr^3

Substitute r = 2t into the formula

V = 4/3π(2t)^3

V = 4/3π × 8t^3

V = 32/3 × πt^3

V = 33.5t^3

Answer:

0.613 milliseconds

Explanation:

Answer:

The pressure in pipe b is 33.4 kpa.

Explanation:

Given that,

Pressure in pipe a = 30 mm hg vacuum

Differential reading = 0.30 m

We need to calculate the pressure in pipe b

Using diagram

[tex]P_{B}+W_{oil}(h_{1}+h_{2})-W_{Hg}(h_{2})-W_{H_{O}}(h_{1})=P_{A}[/tex]

Where, P = pressure

W= specific weight

Put the value into the formula

[tex]P_{B}+W_{oil}(0.15+0.30)-W_{Hg}(0.3)-W_{H_{2}O}(0.15)=-W_{Hg}(0.030)[/tex]

Put the value of specific weight

[tex]P_{B}=-(133)\times(0.030)-(8.95)\times(0.45)+133\times(0.3)+9.80\times0.15[/tex]

[tex]P_{B}=33.4\ kPa[/tex]

Hence, The pressure in pipe b is 33.4 kpa.