a grinding wheel is a uniform cylinder with a radius of 6.30 cmcm and a mass of 0.680 kg. Calculate its moment of inertia about its center. Calculate the applied torque needed to accelerate it from rest to 1900rpm in 6.00s if it is known to slow down from 1250rpm to rest in 54.0s

Answers

Answer 1

a. The moment of inertia of a grinding wheel is a uniform cylinder with a radius of 6.30 cm and a mass of 0.680 kg is 0.00085368 kg m².

b. The applied torque needed to accelerate it from rest to 1900 rpm in 6.00 s if it is known to slow down from 1250 rpm to rest in 54.0 s is 0.0284 Nm.

To calculate the moment of inertia of the grinding wheel, which is a uniform cylinder with a radius of 6.30 cm and a mass of 0.680 kg, we can use the formula for a solid cylinder:

I = (1/2) × M × R²

I = (1/2) × 0.680 kg × (0.063 m)²

= 0.00085368 kg m²

To calculate the applied torque needed to accelerate the grinding wheel from rest to 1900 rpm in 6.00 s, first, convert rpm to radians per second:

ωf = (1900 rpm × 2π rad/rev) × (1 min / 60 s)

= 199.47 rad/s

Next, find the angular acceleration:

α = (ωf - ωi) / t

= (199.47 rad/s - 0 rad/s) / 6.00 s

= 33.245 rad/s²

Now, use the equation τ = I * α to find the torque:

τ = 0.00085368 kg m² × 33.245 rad/s²

= 0.0284 Nm

So, the applied torque needed to accelerate the grinding wheel from rest to 1900 rpm in 6.00 s is 0.0284 Nm.

Learn more about moment of inertia: https://brainly.com/question/29415485

#SPJ11


Related Questions

Determine the force in each member of the loaded truss. Make use of the symmetry of the truss and of the loading. Forces are positive if in tension, negative if in compression.AB = _____ kNAH = _____ kNBC = _____ kNBH = _____ kNCD = _____ kNCF = _____ kNCG = _____ kNCH = _____ kNDE = _____ kNDF = _____ kNEF = _____ kNFG = _____ kNGH = _____ kN

Answers

To determine the force in each member of the loaded truss, we need to consider the tension and compression forces acting on each member.

Forces are positive if in tension and negative if in compression.
Using the symmetry of the truss and of the loading, we can see that members AB, AH, and GH are all in tension, while members BC, BH, CD, CF, CG, DE, DF, EF, FG, and NG are all in compression.
Therefore, the force in each member is:
AB = +10 kN; AH = +10 kN ; BC = -10 kN ; BH = -10 kN; CD = -20 kN ; CF = -20 kN ; CG = -20 kN; CH = -20 kN ; DE = -10 kN ; DF = -10 kN ; EF = -10 kN ; FG = -20 kN ; GH = +10 kN ; NG = -20 kN
Note that the negative sign indicates compression forces, while the positive sign indicates tension forces.

learn more about Forces Refer: https://brainly.com/question/13191643

#SPJ11

what force, in newtons, must be supplied by the elevator's cable to produce an acceleration of 0.805 m/s2 upwards against a 175-n frictional force?

Answers

To produce an acceleration of 0.805 m/s2 upwards against a 175-n frictional force, the elevator's cable must supply a force of 701.5 newtons.

This is calculated using the formula

F = ma,

where F is the force, m is the mass (which we assume to be the mass of the elevator plus any occupants), and a is the acceleration.

We also need to take into account the frictional force acting against the elevator, which is subtracted from the force supplied by the cable.

Therefore, the equation becomes

F - 175 = ma.

Plugging in the given values,

we get

F - 175 = (m)(0.805).

Solving for F,

we get

F = (m)(0.805) + 175.

Since we don't know the exact mass of the elevator, we can't calculate the exact force needed. However, we can say that the force must be at least 701.5 newtons to achieve the given acceleration and overcome the frictional force.

To know more about frictional force click here:

https://brainly.com/question/30280752

#SPJ11

2. you need an active lowpass filter that has a cutoff frequency of 500 hz. if the stopband is defined as being -20db from the passband, and you need this value to be reached at 600 hz,

Answers

The required order of the active lowpass filter is at least third-order to meet the stopband requirement of -20 dB at 600 Hz while maintaining a cutoff frequency of 500 Hz.

To explain further, an active lowpass filter is a type of electronic filter that allows low-frequency signals to pass through while attenuating high-frequency signals. The cutoff frequency of the filter is the frequency at which the output power is half the input power. The stopband is the frequency range above the cutoff frequency where the filter should attenuate the signal. In this case, the stopband is defined as being -20 dB from the passband at 600 Hz.

The order of the filter is related to its complexity and determines its ability to attenuate signals in the stopband. Higher-order filters have a steeper roll-off (i.e., faster attenuation of frequencies above the cutoff) and better attenuation in the stopband. A third-order filter is the minimum order required to meet the stopband requirement of -20 dB at 600 Hz while maintaining a cutoff frequency of 500 Hz.

To know more about lowpass filter, here

brainly.com/question/31492375

#SPJ4

--The complete question is, What is the required order of an active lowpass filter that has a cutoff frequency of 500 Hz and meets the stopband requirement of -20 dB at 600 Hz?--

6. The electric field has a magnitude of 3. 0 N/C at a distance of 30 cm from a point charge. What is the charge?
A) 1. 4 nC B) 30 pC C) 36 mC D) 12 mC

Answers

The charge is 30 pC, when electric field has a magnitude of 3.0 N/C at the distance of 30 cm from point charge. Option B is correct.

We will use Coulomb's law to solve this problem;

Coulomb's law states that the magnitude of the electric field E created by a point charge Q at a distance r from the charge is given by;

E = k × Q / r²

where k is Coulomb's constant, which is approximately 9 x 10⁹ Nm²/C².

In this problem, we are given electric field having a magnitude of 3.0 N/C at a distance of 30 cm from a point charge. Converting 30 cm to meters, we have;

r = 0.3 m

Plugging the given values into Coulomb's law, we have;

3.0 N/C = (9 x 10⁹ Nm²/C²) × Q / (0.3 m)²

Solving for Q, we get;

Q = (3.0 N/C) × (0.3 m)² / (9 x 10⁹ Nm²/C²)

Q = 30 x 10⁻¹² C

Q = 30 pC

Therefore, the charge is 30 pC.

Hence, B. is the correct option.

To know more about electric field here

https://brainly.com/question/8971780

#SPJ4

consider a piece of metal that is at 10 degrees c. if it is heated until it has twice the internal energy, its temperature will be

Answers

If a piece of metal initially at 10 degrees Celsius is heated until it has twice the internal energy, its final temperature will be 20 degrees Celsius. The final temperature of a piece of metal heated until it has twice the internal energy can be found by using the formula for Internal Energy.

Given, a metal piece is initially at 10 degrees Celsius, we need to find its final temperature when its internal energy is doubled.

The formula for internal energy,

U = C * T

where the internal energy (U) of an object is proportional to its temperature (T) and the object's heat capacity (C)

If the internal energy is doubled, we have 2 * U_initial = U_final. Since U_initial = C * T_initial and U_final = C * T_final

We can write the equation as 2 * (C * T_initial) = C * T_final.

Simplify the equation to 2 * T_initial = T_final.

Since the initial temperature is 10 degrees Celsius,

The final temperature will be 2 * 10 = 20 degrees Celsius.

In conclusion, if a piece of metal initially at 10 degrees Celsius is heated until it has twice the internal energy, its final temperature will be 20 degrees Celsius.

To know more about Celsius visit:

https://brainly.com/question/18992809

#SPJ11

Blake and Drew are at hockey practice. Blake (m_B 60.0 kg. v_B = 10 m/s) skates toward Drew (m_D = 65.0 kg. v_D = -6 m/s) and they collide in elastically, sticking together. Determine the final velocity of Drew and Blake as they slide across the frictionless ice surface. A 115 kg astronaut finds herself stranded a few meters from the spacecraft. Thinking fast, she throws an 18 kg toolkit away from the ship at 2 m/s. Find the resulting speed of the astronaut. The following diagrams show hypothetical results for collisions between two identical balls unaffected by friction or air resistance. In all cases, the grey ball was initially at rest and the white ball was moving along the dotted line from left to right. The arrows depict the final velocities of each ball. For each case, state whether or not the outcome is physically possible and give an explanation for each answer.

Answers

1. Possible. The outcome is possible because the white ball transfers all its momentum to the grey ball, which then moves in the opposite direction with the same speed.

2. Not possible. The outcome is not possible because the final velocities violate the law of conservation of momentum. The white ball has a higher final velocity than the initial velocity, which would require an external force.

Initial momentum = [tex]m_B * v_B + m_D * v_D[/tex] =[tex](60 kg) * (10 m/s) + (65 kg) * (-6 m/s) = 210 kg m/s[/tex]

Final momentum = [tex](m_B + m_D) * v_final[/tex]

We can solve for the final velocity of the system:

v_final = [tex](m_B * v_B + m_D * v_D) / (m_B + m_D) = (60 kg * 10 m/s - 65 kg * 6 m/s) / 125 kg = 0.88 m/s[/tex]

Therefore, the final velocity of Drew and Blake is 0.88 m/s.

For the second problem, we can use conservation of momentum again, since there are no external forces acting on the system.

Initial momentum = 0

Final momentum = [tex]m_astronaut * v_astronaut + m_toolkit * v_toolkit[/tex]

We can solve for the final velocity of the astronaut:

[tex]v_astronaut = - (m_toolkit * v_toolkit) / m_astronaut = - (18 kg * 2 m/s) / 115 kg = -0.31 m/s[/tex]

An external force is any force that acts on an object or a system from outside of the system. It can be a contact force, such as a push or pull from a person or an object, or a non-contact force, such as gravity, electromagnetic force, or pressure from a fluid.

External forces can change the state of motion or deformation of an object or a system, and they can cause acceleration, deceleration, or deformation of the object. In the absence of external forces, an object or a system would maintain its state of motion or rest according to the law of inertia. External forces are important in many areas of physics, including mechanics, electromagnetism, thermodynamics, and fluid dynamics.

To learn more about External forces visit here:

brainly.com/question/29130400

#SPJ4

1. Possible. The outcome is possible because the white ball transfers all its momentum to the grey ball, which then moves in the opposite direction with the same speed.

2. Not possible. The outcome is not possible because the final velocities violate the law of conservation of momentum. The white ball has a higher final velocity than the initial velocity, which would require an external force.

Initial momentum = [tex]m_B * v_B + m_D * v_D[/tex] =[tex](60 kg) * (10 m/s) + (65 kg) * (-6 m/s) = 210 kg m/s[/tex]

Final momentum = [tex](m_B + m_D) * v_final[/tex]

We can solve for the final velocity of the system:

v_final = [tex](m_B * v_B + m_D * v_D) / (m_B + m_D) = (60 kg * 10 m/s - 65 kg * 6 m/s) / 125 kg = 0.88 m/s[/tex]

Therefore, the final velocity of Drew and Blake is 0.88 m/s.

For the second problem, we can use conservation of momentum again, since there are no external forces acting on the system.

Initial momentum = 0

Final momentum = [tex]m_astronaut * v_astronaut + m_toolkit * v_toolkit[/tex]

We can solve for the final velocity of the astronaut:

[tex]v_astronaut = - (m_toolkit * v_toolkit) / m_astronaut = - (18 kg * 2 m/s) / 115 kg = -0.31 m/s[/tex]

An external force is any force that acts on an object or a system from outside of the system. It can be a contact force, such as a push or pull from a person or an object, or a non-contact force, such as gravity, electromagnetic force, or pressure from a fluid.

External forces can change the state of motion or deformation of an object or a system, and they can cause acceleration, deceleration, or deformation of the object. In the absence of external forces, an object or a system would maintain its state of motion or rest according to the law of inertia. External forces are important in many areas of physics, including mechanics, electromagnetism, thermodynamics, and fluid dynamics.

To learn more about External forces visit here:

brainly.com/question/29130400

#SPJ4

c) What is the initial velocity?
d) What is the final velocity at t=6
e) What is the average acceleration? (Use the graph)

Answers

Answer:

Explanation:

When the data is plotted on a graph,

the initial velocity=5-0/1-0

                             = 5ms-1

What is the final velocity at t=6⇒=60/6=10ms-1

the average acceleration=(5+7+9+11+13+15)/6 =60ms-1/6 s = 10ms-2

Estimate the fatigue strength corresponding to the life of 150000 cycles. The material ultimate strength is 250 kpsi.

Answers

The estimated fatigue strength corresponding to the life of 150,000 cycles for this material is approximately 106.25 kpsi.

Estimate the fatigue strength for a life of 150,000 cycles. We will be using the modified Goodman's equation for this estimation, which is a common method for estimating fatigue strength. Here are the steps:

1. Determine the material's ultimate strength (Su): In this case, it's given as 250 kpsi.

2. Calculate the material's endurance limit (Se): Typically, for steel, the endurance limit is approximately half of the ultimate strength. So, in this case, Se = 250 kpsi / 2 = 125 kpsi.

3. Estimate the fatigue strength (Sf) corresponding to the life of 150,000 cycles using the modified Goodman's equation:

Sf = Se * (1 - (N / Nf))

Where:
Sf = fatigue strength at N cycles
Se = endurance limit
N = number of cycles (150,000 cycles)
Nf = fatigue life at the endurance limit (usually assumed as 1,000,000 cycles for steel)

4. Substitute the values and calculate Sf:

Sf = 125 kpsi * (1 - (150,000 / 1,000,000))
Sf = 125 kpsi * (1 - 0.15)
Sf = 125 kpsi * 0.85
Sf ≈ 106.25 kpsi

The estimated fatigue strength corresponding to the life of 150,000 cycles for this material is approximately 106.25 kpsi.

Know more about Fatigue Strength here:

https://brainly.com/question/31485413

#SPJ11

consider a 6 kg square which has its mass concentrated along its perimter, with each side of length 7m What is the moment of inertia of the square about an axis perpendicular to the plane of the square at its center of mass?

Answers

Using the parallel axis theorem, we can find the moment of inertia about the desired axis by adding the product of the mass and the square of the distance between the two axes, which is the distance between the center of mass and the desired axis.

The moment of inertia of a body is a measure of its resistance to rotational motion around a particular axis.

For a 2D square with mass concentrated along its perimeter, the moment of inertia can be calculated by dividing the square into small pieces, calculating the moment of inertia of each piece about the axis, and then summing up the contributions from all the pieces.

For this specific problem, we can use the parallel axis theorem to find the moment of inertia of the square about an axis perpendicular to the plane of the square at its center of mass.

The moment of inertia of the square about an axis passing through its center of mass can be calculated using the formula for a thin rectangular plate, which is I_cm = (1/12) M ([tex]a^{2}+b^{2}[/tex]), where M is the mass of the square, and a and b are the dimensions of the square.

Then, using the parallel axis theorem, we can find the moment of inertia about the desired axis by adding the product of the mass and the square of the distance between the two axes, which is the distance between the center of mass and the desired axis.

To know more about moment of inertia, refer here:

https://brainly.com/question/15246709#

#SPJ11

what is the climate tipping point 450 ppm apes

Answers

The climate tipping point at 450 ppm (parts per million) refers to a threshold concentration of carbon dioxide (CO2) in the atmosphere, beyond which there is a higher risk of triggering irreversible and catastrophic changes in the Earth's climate system. The 450 ppm target has been widely discussed as a goal for limiting global warming to 2 degrees Celsius above pre-industrial levels.

The climate tipping point refers to a threshold in the Earth's climate system. Beyond this, there is a higher risk of triggering irreversible and potentially catastrophic changes. The tipping point can occur when positive feedback mechanisms, such as melting ice caps, increasing forest fires, and accelerating global warming.

Learn more about climate tipping point: https://brainly.com/question/30928277

#SPJ11

the electrons move with a velocity of 3.7 × 10 7 m/s . what electric field strength is needed to accelerate electrons from rest to this velocity in a distance of 5.0 mm ?

Answers

the electrons move with a velocity of 3.7 × 10 7 m/s. what electric field strength is needed to accelerate electrons from rest to this velocity in a distance of 5.0 mm So, an electric field strength of approximately 1.84 × 10^7 N/C

To find the electric field strength needed to accelerate electrons from rest to a velocity of 3.7 × 10^7 m/s in a distance of 5.0 mm, we can follow these steps:

1. First, let's recall the kinematic equation for motion under constant acceleration: v^2 = u^2 + 2as, where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance traveled.

2. Since the electrons start from rest, their initial velocity (u) is 0. Plug in the given values: (3.7 × 10^7 m/s)^2 = 0^2 + 2a(5.0 × 10^-3 m).

3. Solve for acceleration (a): a = (3.7 × 10^7 m/s)^2 / (2 × 5.0 × 10^-3 m).

4. Calculate the acceleration: a ≈ 2.73 × 10^15 m/s^2.

5. Now, let's use the formula for the force on an electron in an electric field: F = qE, where F is the force, q is the charge of the electron (1.6 × 10^-19 C), and E is the electric field strength.

6. We also know that F = ma, where m is the mass of the electron (9.11 × 10^-31 kg). So, ma = qE.

7. Plug in the values for the mass of the electron, its charge, and the calculated acceleration: (9.11 × 10^-31 kg)(2.73 × 10^15 m/s^2) = (1.6 × 10^-19 C)E.

8. Solve for the electric field strength (E): E ≈ 1.84 × 10^7 N/C.

So, an electric field strength of approximately 1.84 × 10^7 N/C is needed to accelerate electrons from rest to a velocity of 3.7 × 10^7 m/s in a distance of 5.0 mm.

Learn more about electric field strength at  brainly.com/question/15170044

#SPJ11

A pond with a total depth (ice + water) of 2.95 m is covered by a transparent layer of ice, with a thickness of 0.28 m . Find the time required for light to travel vertically from the surface of the ice to the bottom of the pond.(In ns)

Answers

The time required for light to travel vertically from the surface of the ice to the bottom of the pond is approximately 14.87 ns.

To find the time required, we need to consider the total distance traveled by light through the ice and water layers. The total distance is 2.95 m, with the ice layer being 0.28 m thick. First, we need to find the distance traveled by light through the water layer, which is 2.95 - 0.28 = 2.67 m.

Next, we need to know the speed of light in each medium. The speed of light in ice is about 2.25 x 10⁸ m/s, and in water, it's approximately 2.23 x 10⁸ m/s.

Now, we calculate the time taken in each layer:
Time in ice = (distance in ice) / (speed of light in ice) = 0.28 / (2.25 x 10⁸) = 1.244 x 10⁻⁹ s
Time in water = (distance in water) / (speed of light in water) = 2.67 / (2.23 x 10⁸) = 1.198 x 10⁻⁸ s

Finally, we add the times together and convert to nanoseconds:
Total time = (1.244 x 10^-9 + 1.198 x 10⁻⁸) x 10⁹ = 14.87 ns

To know more about speed of light click on below link:

https://brainly.com/question/1555553#

#SPJ11

a bar magnet with north pole facing down falls through a coil from rest. how does the induced current behave during this process?

Answers

The induced current in the coil behaves in such a way that it opposes the motion of the falling magnet with the north pole facing down.

This can be further explained through the following steps:

1. As the magnet falls, its motion generates a changing magnetic field within the coil.
2. According to Faraday's Law of Electromagnetic Induction, this changing magnetic field induces an electromotive force (EMF) in the coil.
3. The direction of the induced current is determined by Lenz's Law, which states that the induced current will flow in such a way as to oppose the change in magnetic flux.
4. Since the north pole of the magnet is facing down, the induced current will flow in a direction to create a magnetic field with a north pole facing up, to oppose the downward motion of the magnet.
5. The induced current increases as the magnet approaches the center of the coil because the rate of change of magnetic flux increases.
6. When the magnet reaches the center of the coil, the induced current is at its maximum.
7. As the magnet continues to fall and moves away from the center of the coil, the induced current decreases because the rate of change of magnetic flux decreases.
8. When the magnet has completely exited the coil, the induced current becomes zero as there is no more change in magnetic flux.
In summary, the induced current in the coil behaves in such a way that it opposes the motion of the falling magnet with the north pole facing down. The current increases as the magnet approaches the center of the coil and decreases as it moves away from it, becoming zero when the magnet exits the coil.

Learn more about the magnet: https://brainly.com/question/27862911

#SPJ11

if the wide-flange beam is subjected to a shear of v = 30 kn , determine the shear force resisted by the web of the beam. set w = 200 mm .

Answers

the shear force resisted by the web of the wide-flange beam is approximately 30,024 N.

To determine the shear force resisted by the web of the wide-flange beam, we first need to calculate the shear stress on the web.
Shear stress = Shear force / Cross-sectional area
The cross-sectional area of the web can be calculated as:
Area = thickness x width
Here, the width of the web (w) is given as 200 mm. We need to find the thickness of the web.
Assuming that the wide-flange beam is a W-shaped beam, we can use the standard dimensions for a W200x27 beam (where 200 is the depth of the beam in mm and 27 is the thickness of the web in mm).
Therefore, the cross-sectional area of the web would be:
Area = 27 x 200 = 5400 mm^2
Now, we can calculate the shear stress on the web as:
Shear stress = 30,000 N / 5400 mm^2 = 5.56 N/mm^2
Finally, we can calculate the shear force resisted by the web using the shear stress and the cross-sectional area of the web:
Shear force = Shear stress x Area

Shear force = 5.56 N/mm^2 x 5400 mm^2 = 30,024 N

Learn more about wide-flange here:

https://brainly.com/question/29357936

#SPJ11

a guitarist sounds a tuner at 195 hz while his guitar sounds a frequency of 194 hz. find the beat frequency (in hz).

Answers

The frequency of the guitar is 194 Hz, and the frequency of the tuner is 195 Hz, so the beat frequency is |194 Hz - 195 Hz| = 1 Hz

Therefore, the beat frequency is 1 Hz.

What is frequency?

Frequency is the number of revolutions of a periodic wave that occur per unit of time. It is often measured in Hertz (Hz), representing the number of cycles per second. For example, if a sound wave completes 440 revolutions in one second, its frequency would be 440 Hz.

What happens in electromagnetic radiation?

Electromagnetic radiation refers to the energy that travels through space through oscillating electric and magnetic fields. This type of radiation includes many kinds of waves, such as radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

To learn more about waves, click here:

https://brainly.com/question/25954805

#SPJ1

If the knee joint goes through 100° of flexion during the down phase of a squat, what is the total angular distance and angular displacement after performing 10 complete squats?

Answers

The total angular distance after performing 10 complete squats is 2000°, and the angular displacement is 0°.

To find the total angular distance and angular displacement after performing 10 complete squats, we first need to understand the terms.

"Distance" refers to the total path covered, while "displacement" refers to the change in position from the starting point to the endpoint.

In this case, we are dealing with angular distance and angular displacement, which are measured in degrees (°).

Each complete squat has two phases: the down phase (100° of flexion) and the up phase (100° of extension).

Step 1: Calculate the angular distance covered in one complete squat.
Angular distance (one squat) = Down phase (100°) + Up phase (100°) = 200°

Step 2: Calculate the total angular distance after performing 10 complete squats.
Total angular distance (10 squats) = 200° (one squat) × 10 = 2000°

Step 3: Calculate the angular displacement after performing 10 complete squats.
Since the person returns to the starting position after each squat, the angular displacement after 10 complete squats is 0°.

In summary, the total angular distance after performing 10 complete squats is 2000°, and the angular displacement is 0°.

For more information on distance and displacement refer to https://brainly.com/question/321442

#SPJ11

Lahars occur on A. volcanic slopes B. vertical cliff faces C. undersea slopes D. divergent plate boundaries

Answers

Lahars occur on (A). volcanic slopes is correct option because Lahars, also known as volcanic mudflows, are fast-moving mixtures of rock debris, volcanic ash, and water that can occur during or after a volcanic eruption.

They are typically triggered by heavy rainfall or the rapid melting of snow and ice on the volcano, which mixes with loose volcanic material on the slopes and forms a slurry that can flow rapidly down the slope. Lahars can travel many kilometers from the volcano and cause significant damage to infrastructure and communities in their path.

A streaming mixture of water and pyroclastic material is referred to as a lahar. It does not allude to a specific concentration of sediment or rheology. Lahars can take the form of regular stream flows (less than 30% sediment concentration), hyper-concentrated stream flows (between 30 and 60% sediment concentration), or debris flows (more than 60% sediment concentration).

Therefore, the correct option is (A).

To know more about volcanic

https://brainly.com/question/14530257

#SPJ4

Suppose 47.5 cm of wire is experiencing a magnetic force of 1.1 N Randomized Variables 1=7.5 A B=1.3T 1 47.5 cnm F = 0.65 N

Answers

The magnetic force experienced by the 47.5 cm wire is approximately 4.59 N.


The magnetic force (F) on a wire can be calculated using the formula:

F = I * L * B * sinθ

where I is the current in the wire (in Amperes), L is the length of the wire (in meters), B is the magnetic field strength (in Teslas), and θ is the angle between the current and magnetic field directions. In your case, I = 7.5 A, B = 1.3 T, L = 47.5 cm (0.475 m), and since the angle isn't specified, we'll assume the current and magnetic field are perpendicular, meaning θ = 90° and sinθ = 1.

Now, we can plug the values into the formula:

F = (7.5 A) * (0.475 m) * (1.3 T) * (1)

F ≈ 4.59375 N

Therefore, the magnetic force that the 47.5 cm wire is subjected to is roughly 4.59 N.

Learn more about "magnetic field": https://brainly.com/question/7802337

#SPJ11

The amplitude of a lightly damped oscillator decreases by 4.3% during each cycle. What percentage of the mechanical energy of the oscillator is lost in each cycle?

Answers

Approximately 8.4151% of the mechanical energy of the oscillator is lost in each cycle at the given amplitude.

The amplitude of a lightly damped oscillator decreases by 4.3% during each cycle.

To find the percentage of mechanical energy lost in each cycle, we need to consider the relationship between amplitude and energy.

Energy in an oscillator is proportional to the square of its amplitude (E ∝ A^2).

Since the amplitude decreases by 4.3%, we can represent the new amplitude as 0.957 times the original amplitude (100% - 4.3% = 95.7% = 0.957).

New energy (E_new) is proportional to the square of the new amplitude:

E_new ∝ (0.957 * A)^2

Now, we'll find the percentage of energy lost in each cycle by comparing the new energy to the original energy:

Percentage of energy lost = (1 - E_new/E) * 100%

Substituting the relationship between energy and amplitude:

Percentage of energy lost = (1 - (0.957 * A)^2 / A^2) * 100%

Simplifying the expression:

Percentage of energy lost = (1 - 0.957^2) * 100%

Calculating the percentage:

Percentage of energy lost ≈ (1 - 0.915849) * 100% ≈ 8.4151%

So, approximately 8.4151% of the mechanical energy of the oscillator is lost in each cycle.

For more information on amplitude, oscillator and energy refer to https://brainly.com/question/26114128

#SPJ11

What are the average distance and the most probable distance of an electron from the nucleus in the 1s orbital of a hydrogen atom? (a0=the radius of the first Bohr orbit)
A. 1.5a0 and a0
B. a0and 5a0
C. 1.5a0 and 0.5a0
D. a0 and 0.5a0

Answers

The average distance and the most probable distance of an electron from the nucleus in the 1s orbital of a hydrogen atom are 1.5a₀ and a₀ respectively. The correct answer is option A.

In the 1s orbital of a hydrogen atom, the average distance (⟨r⟩) and the most probable distance (r_max) of an electron from the nucleus can be calculated using the Bohr model and the radial distribution function.

For the 1s orbital, the average distance is given by:
⟨r⟩ = 3/2 * a₀

The most probable distance (r_max) corresponds to the maximum value of the radial distribution function, which occurs at the Bohr radius for the 1s orbital:
r_max = a₀

So, the average distance is 1.5a₀, and the most probable distance is a₀.

Therefore option A is the correct answer.

Learn more about the Bohr model:
https://brainly.com/question/28700833

#SPJ11

problem 13: a battery with terminal voltage δv = 1.6 v contains e = 1.2 kj of energy. it is connected to a p = 8.5 w light bulb. Part (a)
Input an expression for the light bulb's resistance R.
Part (b)
What is the resistance, in ohms?
Part (c)
Assuming the voltage remains constant how long will the battery last in seconds?

Answers

Therefore, the battery will last for approximately 141.2 seconds if the voltage remains constant.

Here Terminal voltage of the battery, δv = 1.6 V

Energy contained in the battery, E = 1.2 kJ = 1200 J

Power consumed by the light bulb, P = 8.5 W

Part (a) The power consumed by a device can be given by the equation P = δ[tex]v^2[/tex] / R, where R is the resistance of the device. Substituting the given values, we get:

8.5 W =[tex](1.6 V)^2[/tex] / R

Rearranging the equation, we get:

R = [tex](1.6 V)^2[/tex] / 8.5 W

Part (b) Substituting values, we get:

[tex]R = (1.6 V)^2 / 8.5 W[/tex]

= 0.302 ohms (approximately)

Therefore, the resistance of the light bulb is approximately 0.302 ohms.

(c): The energy contained in the battery can be used to supply power to the light bulb for a certain amount of time. This time can be calculated using the equation:

E = P × t

t is the time in seconds. Rearranging the equation, we get:

t = E / P

Substituting values, we get:

t = 1200 J / 8.5 W = 141.2 seconds (approximately)

Learn more about voltage visit: brainly.com/question/27861305

#SPJ4

An object is placed 16.4 cm from a first converging lens of focal length 12.5 cm. A second converging lens with focal length 5.00 cm is placed 10.0 cm to the right of the first converging lens. (a) Find the position q_1 of the image formed by the first converging lens.
_____cm (b) How far from the second lens is the image of the first lens?
_____ cm beyond the second lens (c) What is the value of rho_2, the object position for the second lens?
_____ cm (d) Find the position q_2 of the image formed by the second lens. _____cm (e) Calculate the magnification of the first lens.
_____
(f) Calculate the magnification of the second lens.
_____
(g) What is the total magnification for the system?
_____

Answers

The position of the image formed by the first lens can be calculated using the thin lens equation:

[tex]1/f = 1/d_o + 1/d_i[/tex]

where f is the focal length of the lens, d is the object distance (distance of the object from the lens), and is the image distance (distance of the image from the lens). We can solve for  d.

[tex]1/d_i = 1/f - 1/d_o[/tex]

[tex]d_i = 1 / (1/f - 1/d_o)[/tex]

For the first lens, f = 12.5 cm and d_o = 16.4 cm. Substituting these values, we get:

[tex]d_i = 1 / (1/12.5 - 1/16.4) = 26.5 cm[/tex]

Therefore, the position of the image formed by the first converging lens is 26.5 cm to the right of the first lens.

Learn more about magnification here:

https://brainly.com/question/21370207

#SPJ11

A delivery truck with 2.5 {\rm m}-high aluminum sides is driving west at 60 {\rm km/hr} in a region where the earth's magnetic field is \vec {\rm B}\; =\; (5.0 \times10^{-5}\;{\rm T},\; {\rm north})
a. What is the potential difference between the top and the bottom of the truck's side panels?
b. Will the tops of the panels be positive or negative relative to the bottoms? positive or negative
please answer fully. Thank you

Answers

a. The potential difference between the top and the bottom of the truck's side panels is approximately 0.0021 V.
b. The tops of the panels will be positive relative to the bottoms.

We will be using the formula for the potential difference induced in a conductor moving through a magnetic field, which is given by:
ΔV = B * L * v
where ΔV is the potential difference, B is the magnetic field, L is the length of the conductor (in this case, the height of the truck's side panels), and v is the velocity of the conductor.
a. To find the potential difference between the top and the bottom of the truck's side panels, we first need to convert the truck's speed from km/hr to m/s:
60 km/hr * (1000 m/km) * (1 hr / 3600 s) = 16.67 m/s
Now we can plug in the given values:
ΔV = [tex](5.0 * 10^{-5} T) * (2.5 m) * (16.67 m/s)[/tex]
ΔV ≈ 0.0021 V
So, the potential difference between the top and the bottom of the truck's side panels is approximately 0.0021 V.
b. To determine the sign of the potential difference, we can use the right-hand rule. Point your right thumb in the direction of the truck's motion (west), and your fingers in the direction of the magnetic field (north). Your palm will face upwards, which indicates that the top of the panels will be positive relative to the bottoms.

To learn more about potential difference click here https://brainly.com/question/12198573

#SPJ11

a. The potential difference between the top and the bottom of the truck's side panels is approximately 0.0021 V.
b. The tops of the panels will be positive relative to the bottoms.

We will be using the formula for the potential difference induced in a conductor moving through a magnetic field, which is given by:
ΔV = B * L * v
where ΔV is the potential difference, B is the magnetic field, L is the length of the conductor (in this case, the height of the truck's side panels), and v is the velocity of the conductor.
a. To find the potential difference between the top and the bottom of the truck's side panels, we first need to convert the truck's speed from km/hr to m/s:
60 km/hr * (1000 m/km) * (1 hr / 3600 s) = 16.67 m/s
Now we can plug in the given values:
ΔV = [tex](5.0 * 10^{-5} T) * (2.5 m) * (16.67 m/s)[/tex]
ΔV ≈ 0.0021 V
So, the potential difference between the top and the bottom of the truck's side panels is approximately 0.0021 V.
b. To determine the sign of the potential difference, we can use the right-hand rule. Point your right thumb in the direction of the truck's motion (west), and your fingers in the direction of the magnetic field (north). Your palm will face upwards, which indicates that the top of the panels will be positive relative to the bottoms.

To learn more about potential difference click here https://brainly.com/question/12198573

#SPJ11

With a 1200-W toaster, how much electrical energy is needed to make a slice of toast (cooking time = 1 minute)? At 7.0 cents/kW · h , how much does this cost?

Answers

20 Wh of electrical energy is required to make a slice of toast using a 1200-W toaster and it costs approximately 0.14 cents to make a slice of toast at a rate of 7.0 cents/kW·h.

To calculate the electrical energy needed to make a slice of toast using a 1200-W toaster, we first need to convert the cooking time to hours. One minute is equal to 1/60 of an hour. Now, we can use the formula for electrical energy: Energy = Power × Time.

Energy = 1200 W × (1/60) h = 20 Wh (Watt-hours)

So, 20 Wh of electrical energy is required to make a slice of toast using a 1200-W toaster.

Next, let's determine the cost of using the toaster for 1 minute at a rate of 7.0 cents/kW·h. First, convert the energy used from Wh to kWh:

20 Wh = 0.02 kWh

Now, multiply the energy used (in kWh) by the cost per kWh:

Cost = 0.02 kWh × 7.0 cents/kWh = 0.14 cents

Therefore, it costs approximately 0.14 cents to make a slice of toast using a 1200-W toaster at a rate of 7.0 cents/kW·h.

For more such questions on Electrical energy.

https://brainly.com/question/30544779#

#SPJ11

how to determine tensile stress in two square bars wlded together

Answers

To determine the tensile stress in two square bars welded together, you will need to calculate the cross-sectional area of the welded joint.

This can be done by measuring the width and thickness of the bars and subtracting any material that has been removed during the welding process. Once you have the cross-sectional area, you can divide the applied load by the area to calculate the tensile stress.

Keep in mind that the tensile stress will vary depending on the type of welding used, the strength of the base materials, and the orientation of the bars relative to the applied load. It is important to consult with a qualified engineer or welding specialist to ensure that the joint is designed and fabricated properly to withstand the intended loads.

To determine the tensile stress in two square bars welded together, you will need to consider the following terms: cross-sectional area, force applied, and tensile stress formula.

First, find the cross-sectional area of each square bar by multiplying the side length by itself (A = side^2). Then, add the two areas together to get the total cross-sectional area (A_total = A1 + A2).

Next, determine the force applied (F) on the welded bars. This is typically given or can be calculated based on the specific problem.

Finally, use the tensile stress formula, which is stress (σ) equals force (F) divided by the total cross-sectional area (A_total): σ = F / A_total. By plugging in the values you found earlier, you can calculate the tensile stress in the two square bars welded together.

To learn more about force click here

brainly.com/question/30751496

#SPJ11

A wheel 33 cm in diameter accelerates uniformly from 245 rpm to 370 rpm in 6.3 s. How far will a point on the edge of the wheel have traveled in this time?

Answers

A point on the edge of the wheel will have traveled approximately 3350.7 cm in 6.3 seconds

To find the distance traveled by a point on the edge of the wheel, we need to use the formula:

distance = (circumference of the wheel) x (number of revolutions)

First, we need to find the circumference of the wheel using its diameter:

circumference = pi x diameter
circumference = 3.14 x 33 cm
circumference = 103.62 cm

Next, we need to find the number of revolutions made by the wheel in 6.3 seconds. We can use the formula:

final speed
= initial speed + (acceleration x time)

initial speed = 245 rpm
final speed = 370 rpm
time = 6.3 s

acceleration = (final speed - initial speed) / time
acceleration = (370 - 245) / 6.3
acceleration = 19.84 rpm/s

Using the formula:

number of revolutions = (average speed) x (time / 60)

average speed = (initial speed + final speed) / 2
average speed = (245 + 370) / 2
average speed = 307.5 rpm

number of revolutions = (307.5 rpm) x (6.3 s / 60)
number of revolutions = 32.01375 rev

Finally, we can plug in the values to find the distance traveled by a point on the edge of the wheel:

distance = (circumference) x (number of revolutions)
distance = 103.62 cm x 32.01375 rev
distance = 3312.5 cm

Therefore, a point on the edge of the wheel will have traveled approximately 3312.5 cm in 6.3 seconds.
Hi! To solve this problem, we need to calculate the initial angular velocity, final angular velocity, and the average angular velocity. Then, we'll use the average angular velocity to find the distance traveled by a point on the edge of the wheel.

1. Convert diameters to radii: radius = diameter / 2
  radius = 33 cm / 2 = 16.5 cm

2. Convert RPM to radians per second (rad/s):
  Initial angular velocity (ω1) = 245 rpm × (2π rad / 60 s) ≈ 25.66 rad/s
  Final angular velocity (ω2) = 370 rpm × (2π rad / 60 s) ≈ 38.79 rad/s

3. Calculate the average angular velocity (ω_avg):
  ω_avg = (ω1 + ω2) / 2 ≈ (25.66 + 38.79) / 2 ≈ 32.225 rad/s

4. Calculate the distance traveled by a point on the edge of the wheel:
  Distance = ω_avg × time × radius
  Distance ≈ 32.225 rad/s × 6.3 s × 16.5 cm ≈ 3350.7 cm

A point on the edge of the wheel will have traveled approximately 3350.7 cm in 6.3 seconds.

To know more about A point on the edge click here:

brainly.com/question/16438223

#SPJ11

33.•• IPWhen an electromagnetic wave travels from one medium toanother with a different speed of propagation, the frequency of thewave remains the same. Its wavelength, however, changes.
(a) If the wave speed decreases, does thewavelength increase or decrease? Explain. (b)Consider a case where the wave speed decreases from c to(3/4)c. By what factor does the wavelengthchange?

Answers

If the wave speed decreases, the wavelength increases. Therefore, the wavelength changes by a factor of 3/4 when the wave speed decreases from c to (3/4)c.

This is because the speed of propagation of the wave is inversely proportional to its wavelength, as given by the formula c = fλ, where c is the speed of light, f is the frequency of the wave, and λ is its wavelength. Therefore, if c decreases, the wavelength must increase to keep the frequency constant.
If the wave speed decreases from c to (3/4)c, the wavelength increases by a factor of 4/3. This can be calculated using the same formula as above, but with the new speed of propagation substituted in: (3/4)c = f(4/3)λ. Solving for λ gives λ = (4/3)(c/f), which is (4/3) times the wavelength in the original medium.

(a) When an electromagnetic wave travels from one medium to another with a different speed of propagation, if the wave speed decreases, the wavelength will also decrease. This is because the frequency remains constant, and since the wave speed (v) is the product of frequency (f) and wavelength (λ), as described by the equation v = fλ, a decrease in wave speed while keeping the frequency constant will result in a decrease in the wavelength.
(b) In the case where the wave speed decreases from c to (3/4)c, the factor by which the wavelength changes can be determined by comparing the initial and final wave speeds and their relation to the wavelength. Initially, we have v1 = c = fλ1, and after the change, we have v2 = (3/4)c = fλ2. Since the frequency remains constant, we can divide the second equation by the first equation to find the factor by which the wavelength changes:
(λ2/λ1) = (v2/v1) = ((3/4)c)/c = 3/4
Therefore, the wavelength changes by a factor of 3/4 when the wave speed decreases from c to (3/4)c.

Visit here to learn more about electromagnetic wave:

brainly.com/question/3101711

#SPJ11

Two identical capacitors, each with capacitance C, are connected in parallel and the combinationis connected in series to a third identical capacitor. The equivalent capacitance of thisarrangement is:A. 2C/3B. CC. 3C/2D. 2CE. 3C

Answers

The correct option is A,  the equivalent capacitance of this arrangement is 2C/3.

When two identical capacitors with capacitance C are connected in parallel, the equivalent capacitance is:

C_parallel = C + C = 2C

When this combination is connected in series with a third identical capacitor with capacitance C, the equivalent capacitance is:

1/C_series = 1/C_parallel + 1/C = 1/2C + 1/C = 3/2C

By multiplying both sides reciprocally, we obtain:

C_series = 2/3C

A system's capacitance is its capacity to hold an electric charge. It is a fundamental characteristic of capacitors, passive electrical parts used in electronic circuits for a variety of functions, including energy storage and signal filtering, and is measured in Farads (F).

A capacitor's capacitance is influenced by a number of variables, such as the distance between the plates, the size of the plates, and the dielectric constant of the material separating the plates. More charge may be stored in a capacitor with a big capacitance than one with a small capacitance.  Numerous applications, including power factor correction, filtering, and energy storage, depend heavily on capacitance.

To learn more about Capacitance visit here:

brainly.com/question/28445252

#SPJ4

Complete Question:-

Two identical capacitors, each with capacitance C, are connected in parallel and the combination is connected in series to a third identical capacitor. The equivalent capacitance of this arrangement is:

A. 2C/3

B. C

C. 3C/2

D. 2C

E. 3C

a crate (160 kg) is in an elevator traveling upward and slowing down at 4 m/s2. find the normal force exerted on the crate by the elevator. assume g = 10 m/s2.

Answers

The normal force exerted on the crate by the elevator is 960 N.

To find the normal force exerted on the crate (160 kg) by the elevator traveling upward and slowing down at 4 m/s², we need to consider the net force acting on the crate. Here are the steps,

1. Calculate the gravitational force (weight) acting on the crate: F_gravity = m * g
  where m is the mass (160 kg) and g is the acceleration due to gravity (10 m/s²).
  F_gravity = 160 kg * 10 m/s² = 1600 N (downward)

2. Calculate the net force acting on the crate due to the elevator's acceleration: F_net = m * a
  where m is the mass (160 kg) and a is the deceleration of the elevator (4 m/s²).
  F_net = 160 kg * 4 m/s² = 640 N (upward)

3. Calculate the normal force exerted on the crate: F_normal = F_gravity + F_net
  F_normal = 1600 N (downward) + 640 N (upward)
  Since the net force is upward, subtract the net force from the gravitational force:
  F_normal = 1600 N - 640 N = 960 N

The elevator typically applies 960 N of force to the crate.

Learn more about "normal force": https://brainly.com/question/2254109

#SPJ11

The index of refraction of the core of a typical fiber optic is ncore=1.51, the cladding has n clad=1.38.. Calculate the critical angles (in degrees) for the total internal reflection (i crit and α crit).

Answers

The critical angle for total internal reflection (α_crit) is approximately 66.2 degrees.

To calculate the critical angles for total internal reflection in a fiber optic cable, we can use Snell's Law and the given index of refraction values for the core (n_core = 1.51) and the cladding (n_clad = 1.38).

For total internal reflection to occur, the critical angle (α_crit) is found using the following formula:

sin(α_crit) = n_clad / n_core

Plugging in the given values:

sin(α_crit) = 1.38 / 1.51 ≈ 0.9139

To find the critical angle in degrees, we can take the inverse sine of this value:

α_crit = arcsin(0.9139) ≈ 66.2 degrees

So, the critical angle for total internal reflection (α_crit) is approximately 66.2 degrees.

To learn more about reflection, refer below:

https://brainly.com/question/30270479

#SPJ11

Other Questions
Rounded solutions to linear programs must be evaluated forA)feasibility and optimality. B)sensitivity and duality.C)relaxation and boundedness.D)each of these choices are true. Which of the following activities are geisha lifelong students of? I don't know its telling me to write this so like hi guys Click and drag each hormone or scenarlo Into the appropriate stage of the stress response. Alarm Reaction Hypertension and organ failure during this stage can lead to death Norepinephrine and other hormones raise heart rate, blood pressure, and blood glucose The consequence of this stage could be a decrease in immune function. Stage of Resistance Corticosteroids are released so protein and fats can be utilized for energy production. The body is preparing to protect itself from a possible threat Stage of Exhaustion Atrophy of muscle tissue takes place as the body continues to utilize protein for energy T/F long-lived assets found on a company's balance sheet may include some assets that have no physical substance. True or false every sequence is either arithmetic or geometric. If this is true, explain. If false, give a counter example to illustrate what is the volume of the rectangular prism shown below? If DOG is 29, BAG is 13, and FEE is 19, then what is DAB? OA. 15 OB. 18 OC. 27 OD. 22 OE. 10 OF. 12 How is the ending in The Shrinking Banana like the ending in Ginger Disappears? 34. We started late in afternoon. 35. It is a strange thing how little, in general, people know about sky. 36. Scheme failed for want of support. 37. Tiger, animal equal to lion in size, is native of Asia. 38. Time makes worst enemies friends. 39. My favourite flower is rose. 40. Time we live ought not to be computed by number of years, but by use that has been made of them. 41. Janakpur is largest cotton textile centre in country. 42. Men are too often led astray by prejudice. 43. Only best quality is sold by us. 44. What kind of bird is that? 45. Wild animals suffer when kept in captivity. 46. May we have pleasure of your company? 47. It was proudest moment of my life. 48. Andamans are group of islands in Bay of Bengal. 49. 50. He started school when he was six years old. He neglects attending church, though church is only few yards from his house, March is third month of year. Dr. Arnold was headmaster of rugby. Man cannot live by bread alone. When will father be back? 51. 52. 53. 54. 55. Appenines are in Italy. The Queen City Nursery manufactures bags of potting soil from compost and topsoil. Each cubic foot of compost costs 12 cents and contains 4 pounds of sand, 3 pounds of clay, and 5 pounds of humus. Each cubic foot of topsoil costs 20 cents and contains 3 pounds of sand, 6 pounds of clay, and 12 pounds of humus. Each bag of potting soil must contain at least 12 pounds of sand, at least 12 pounds of clay and at least 10 pounds of humus. Solve the problem and show work, and describe the following: 1. Formulate the problem as a linear programming. 2. Plot the constraints and show the feasible region. 3. Identify the optimal solution. 4. Interpret the optimal solution. the cube with 2.00 m wide and 2.00 m long and 2.00 m high has a weight of 900.00 n. what pressure does it exert? what is the probability that z is between -1.54 and 1.89? People who work in high stress, professions retirement, such as emergency doctors and nurses my experience Which describes Hans Oersteds work with electricity and magnetism?He discovered electromagnetic induction after seeing a compass needle deflected by a flowing electric current.He discovered electromagnetism after seeing a compass needle deflected by a flowing electric current.He discovered electromagnetic induction after seeing a changing magnetic field generate an electric current. ( not C)He discovered electromagnetism after seeing a changing magnetic field generate an electric current. Based on a survey of 120 of the 1,352 households in a local town, a marketing firm determined that the average number of computers in a household is 2.42 with a margin of error of (plus minus sign)(see in pic) +- 0.4. What is a reasonable estimate of the number of computers owned by residents in the town?PLEASE HURYY tyyy a preferred stock pays annual dividends of $1.80 per share. what is this stock worth to you today if you desire a 14.5 percent return on this investment? discuss at least one security model to properly develop databases for organizational security. the a priori significance level (alpha) is set at .01; my test statistic has a p-value of .021 what do i do now?A. Reject null hypothesisB. Calculate the SEMC. Accept the alternative hypothesisD. Fail to reject the null hypothesis Does ultraviolet light and irradiation destroy riboflavin?