Answer:
Explanation: Force = mg as the wire is fixed at one point and the load is inserted at one end.
g=9.8m/s²
F= mg
F= 20×9.8= 19.6 newton
Strain= Δl/L
where Δl= change in length
and L= original length
Strain = 0.24×0.001 m/4m
Strain=0.00006
Stress= F/A
where A = cross sectional area
therefore A = π× (diametre/2)²
A=3.14×1²≈3.14 mm²= 0.000000314m²
Stress = 19.6/0.000000314=62420382 Pascal
8. Consider the following equation: IQ (MA/CA) X 100. What does the MA stand for?
m-factor
mental age
male factor
multiple factor
Answer:
In the equation IQ (MA/CA) X 100, the MA stands for mental age. Intelligence quotient (IQ) is a measure of cognitive ability that is often calculated using the ratio of an individual's mental age to their chronological age, multiplied by 100. In this equation, MA refers to the individual's mental age, which is their level of cognitive development as measured by an intelligence test. CA refers to their chronological age, which is their actual age in years. The ratio of these two values is used to calculate their IQ score.
(1) Relief valves are used in pneumatic systems as damage-preventing units.
(2) Check valves are used in both hydraulic and pneumatic systems.
Regarding the above statements,
Both No.1 and No. 2 are true.
neither No. 1 nor No. 2 is true.
only No. 1 is true.
(1) Relief valves are components used in pneumatic systems to prevent harm. (2) Pneumatic and hydraulic systems both employ check valves. A- Both Nos. 1 and 2 are accurate in relation to the aforementioned assertions.
What do scientific units mean?Any standard that is used to compare measurements is referred to as a unit. Measurements of a property that have been taken using various units—for example, inches to centimeters—can be accommodated using unit conversions.
What does SI mean in science?The metric system, sometimes referred to as the SI, is the accepted unit of measurement on a global scale. World Metrology Day is an international holiday commemorating the signing of the International Treaty of the Meter in Paris on May 20, 1875, by seventeen nations, including the United States.
To know more about Units visit:
https://brainly.in/question/11622331
#SPJ4
Identify the 5 stages of mitosis:
Phase
Picture
What happens
________
Chromosomes are visible, nuclear membrane breaks down, spindle fibers begin to form.
________
Sister chromatids line up at the center of the cell.
________
Sister chromatids are pulled apart and move to opposite poles of the cell.
________
Spindle fibers breakdown, nuclear membrane forms, and chromosomes begin to uncoil and form chromatin.
________
Cytoplasm splits in 2 and the cell divides.
Answer:
the first one is Interphase
the second one is prophase
the third one is metaphase
the fourth one is Anaphase
the last one is Telophase
A length of wire is connected to a 9.0 V power pack and an ammeter. The reading on the ammeter is 0.25 A.
Calculate the resistance of the wire. Give the unit.
The resistance of the wire, given that it is connected to a 9.0 V power pack and an ammeter is 36 ohms
How do I determine the resistance?From Ohm's law, we understood that the voltage, current and resistance are related according to the following formula:
Voltage (V) = Current (I) × resistance (R)
V = IR
Using the above formula, we can obtain the resistance of the wire as follow:
Voltage (V) = 9.0 VoltsCurrent (I) = 0.25 AResistance (R) = ?Voltage (V) = Current (I) × resistance (R)
9 = 0.25 × resistance
Divide both sides by
Resistance = 9 / 0.25
Resistance = 36 ohms
Thus, we can conclude that the resistance of the wire is 36 ohms
Learn more about resistance:
https://brainly.com/question/23960560
#SPJ1
28. A car is traveling east at an unknown initial velocity. Without changing directions, it accelerates at 0.75 m/s²
for a distance of 300 m, increasing its velocity to 30 m/s. What was the initial velocity of the car?
Answer: 13 m/s.
Explanation: To solve this problem, we need to use the equation for motion with constant acceleration:
d = v₀t + 1/2 at²
where d is the distance traveled, v₀ is the initial velocity, t is the time it takes to travel that distance, and a is the acceleration.
Since we know the distance the car travels (300 m), the final velocity of the car (30 m/s), and the acceleration of the car (0.75 m/s²), we can solve for the initial velocity. We just need to rearrange the equation to solve for v₀:
v₀ = (d - 1/2 at²) / t
In this case, we can plug in the known values to find the initial velocity:
v₀ = (300 - 1/2 * 0.75 * t²) / t
Since the final velocity of the car is 30 m/s and the acceleration is 0.75 m/s², we can use the equation for motion with constant acceleration to find the time it takes for the car to travel 300 m:
v = v₀ + at
30 = v₀ + 0.75t
Rearranging to solve for t, we get:
t = (30 - v₀) / 0.75
Substituting this value for t in the equation for the initial velocity, we get:
v₀ = (300 - 1/2 * 0.75 * ((30 - v₀) / 0.75)²) / ((30 - v₀) / 0.75)
This simplifies to:
v₀ = (300 - 1/2 * 0.75 * (900 - 2v₀) / 0.75) / (30 - v₀)
which simplifies further to:
v₀ = (300 - 675 + v₀) / (30 - v₀)
Solving for v₀, we get:
v₀ = -375 / -29
which simplifies to:
v₀ = 13 m/s
Therefore, the initial velocity of the car is 13 m/s.
a student is designing an experiment in which an object of unknown mass is pushed across a frictionless surface
The applied force must be larger than the frictional force for a body to move successfully.
What is friction?Between two surfaces that are sliding or attempting to slide over one another, there is a force called friction. For instance, friction makes it challenging to push a book down the floor. Friction always moves an object in a direction that is counter to the direction that it is traveling or attempting to move.
When a body is pushed, an exact quantity of frictional force is created, up until the point where Fs max = coefficient of friction * normal force.
After that, when fs max exceeds the frictional force, dynamic friction enters the picture, which is what causes the body to move.
The body begins to move after a force is applied that is more than the minimal need, or what we refer to as the Threshold (f applied > fs max).
In the case of a frictionless surface, the applied force will be perpendicular to the gravitational force that is being taken into account. Even the slightest acceleration must cause the body to move.
To know more about friction:
https://brainly.com/question/28356847
#SPJ4
A block of mass 0.40 kg and density 2900 kg/m3 is completely submerged under the water in static equilibrium on top of a spring (k = 50.0 N/m) that is fixed to the bottom of the container as shown in the figure. How much is the spring compressed? (the density of water is 1000 kg/m3) cm40
A block of mass 0.40 kg and density 2900 kg/m3 is completely submerged under the water in static equilibrium on top of a spring (k = 50.0 N/m) that is fixed to the bottom of the container, the spring is compressed by 0.051 m.
To determine the amount that the spring is compressed, you will need to consider the mass of the block, the density of the block and the water, and the spring constant of the spring.
The weight of the block is equal to the mass of the block times the acceleration due to gravity.
The equation for the weight of the block can be written as:
W = m * g
where W is the weight of the block, m is the mass of the block (0.40 kg), and g is the acceleration due to gravity (9.8 m/s^2).
Plugging in the values, you get:
W = 0.40 kg * 9.8 m/s^2
W = 3.92 N
The buoyant force acting on the block is equal to the weight of the water displaced by the block. The weight of the water displaced by the block is equal to the volume of the block times the density of the water times the acceleration due to gravity.
The equation for the buoyant force can be written as:
F_b = V * rho_w * g
where F_b is the buoyant force, V is the volume of the block, rho_w is the density of the water (1000 kg/m^3), and g is the acceleration due to gravity (9.8 m/s^2).
The volume of the block can be calculated using the density of the block and the mass of the block.
The equation for the volume of the block can be written as:
V = m/rho
where V is the volume of the block, m is the mass of the block (0.40 kg), and rho is the density of the block (2900 kg/m^3).
Plugging in the values, you get:
V = 0.40 kg / 2900 kg/m^3
V = 0.0014 m^3
Plugging this value into the equation for the buoyant force, you get:
F_b = 0.0014 m^3 * 1000 kg/m^3 * 9.8 m/s^2
F_b = 1.37 N
The net force acting on the block is equal to the weight of the block minus the buoyant force.
The equation for the net force can be written as:
F_net = W - F_b
where F_net is the net force, W is the weight of the block, and F_b is the buoyant force.
Plugging in the values, you get:
F_net = 3.92 N - 1.37 N
F_net = 2.55 N
The spring force is equal to the spring constant times the amount that the spring is compressed.
The equation for the spring force can be written as:
F_s = k * x
where F_s is the spring force, k is the spring constant (50.0 N/m), and x is the amount that the spring is compressed.
Solving for x, you get:
x = F_s / k
Plugging in the values, you get:
x = 2.55 N / 50.0 N/m
x = 0.051 m
To know more about buoyancy
https://brainly.com/question/19168433
#SPJ4
the position of the 10-kg rod ab is controlled by the 2-kg block shown, which is slowly moved to the left by the force p. knowing that there is not friction between all surfaces of contact, calculate the magnitude p of the force for values of x from 900 to 100 mm, using 100-mm decrements. plot p vs x and determine the maximum and minimum values of p and the corresponding values of x
The highest possible The value of a graph, also known as the global maximum, is the location where the graph's y value achieves its absolute maximum.
What plot values of p and the corresponding values of x?To determine the critical point, we shall set the function's first derivative to zero and solve for x. This point's maximum or minimum value can be determined by taking the second derivative, or f”(x). The second derivative will have a minimal value if it is positive.
The two blocks are thought to be in a balance. If we force P to go to £2.69, then there is no maximum value and one piece equals zero. Zero is less than that, hence the system ought to be in equilibrium. If the force p is in at £2.69, then it must be of equal brands. When everyone is balanced.
Therefore, The maximum value for the entire function is at this point. The location on a graph where the y-coordinate has the lowest value is known as the minimal value.
Learn more about plot here:
https://brainly.com/question/29172804
#SPJ1
Which of the following describes the independent variable?
It is called the respondent variable.
It is plotted on the vertical axis when graphed.
It refers to a quantity changed by the experimenter.
It is something that remains controlled during trials.
It refers to a quantity changed by the experimenter.
The independent variable is a variable that is manipulated or controlled by the experimenter in an experiment. It is the variable that is thought to affect the dependent variable, which is the variable being measured or observed in the experiment. The independent variable is plotted on the horizontal axis when graphed, and is often referred to as the predictor variable. The respondent variable is not a commonly used term in scientific research.
In an experiment, a student measured the volume of a substance while the mass was changed. The student measured up to five kilograms. The graph of the data is plotted below.
A volume versus mass graph is shown with mass on the vertical axes from 1 to 10 kilograms and volume on the horizontal axis from 1 to 5 milliliters. A line from the origin through all points and beyond.
Which of the following is an error the student made in creating an accurate graph?
The axes and graph are based only on measured values.
The axes are labeled with the incorrect variables.
The plotted points do not show all data collected.
The title has the incorrect order for the variables.
Answer:
Answer:
let the first point be a second be b third be c fourth be d and last point be e.
The point a and d are incorrect. because tye plotting of the is incorrect
a projectile with two times the mass is placed into the launcher out with the same initial velocity would this change the range
Yes, the range would change. Since the mass of the projectile has doubled, its momentum has also doubled.
What is momentum?Momentum is the measure of an object's resistance to changes in its state of motion. It is a vector quantity, meaning it has both magnitude and direction. Momentum is calculated by multiplying the mass and velocity of an object. Momentum is conserved, meaning that the total momentum of a system remains constant, even if the individual momentum of each object within the system changes. In a collision between two objects, the total momentum before the collision is equal to the total momentum after the collision. Momentum is a powerful concept and has many applications in physics. For example, it is the basis for the laws of motion, the conservation of energy, and the study of planetary motion.
Since momentum is conserved, the projectile's velocity after launch will be reduced. This in turn will reduce the range of the projectile, as it will not be able to travel as far with a lower velocity as it would with a higher velocity.
To learn more about momentum
https://brainly.com/question/18798405
#SPJ4
This range would increase 4 times.
What does the term "projectile motion" refer to?
The movement of an object that has been launched into the air is known as projectile motion. Only gravity is felt by the item after the initial force that launches it. Projectile and trajectory both refer to the same thing: an object.
The projectile's motion is divided into two parts: vertical motion and horizontal motion. Furthermore, since perpendicular components of motion are not reliant on one another, it is necessary to discuss each of these two components of motion independently.
Range of projectile is R=(vi²sin2∅)/g
So when the velocity is doubled, Range R will be
I.e R'= ((2Vi)²sin2∅)/g
R'=4(Vi²sin2∅)/g
R'=4R
To learn more about projectile motion use link below:
https://brainly.com/question/10680035
#SPJ4
a block of mass 3.2kg slides from rest a distance d down a frictionless incloine at angle 30 where it runs into a spring of spring constatn 431
When there is compression of 3.63 cm in the spring , block will have maximum velocity. there after its speed will start decreasing.
What is potential energy of a spring?
When spring is stretched, it undergoes displacement. It comes to its equilibrium position when force is removed. So, it exerts an equal and opposite force When it is stretched. Work is done by this force that is stored in the form of potential energy.
Since potential energy = force × displacement
and, force = spring constant × displacement
So, potential energy = spring constant × (displacement)²
According to the given question:
a ) work done by gravitational force
= mg sinθ ( d + .21)
Potential energy stored in compressed spring
= 1/2 k x²
= .5 x 431 x ( .21 )²
= 9.5
According to conservation of energy
mg sinθ ( d + .21) = 9.5
3.2 x 9.8 x sin 30( d + .21 ) = 9.5
d = 40 cm
b )
As long as mg sin30 is greater than kx ( restoring force ) , there will be acceleration in the block.
mg sin30 = kx
3.2 x 9.8 x .5 = 431 x
x = 3.63 cm
When there is compression of 3.63 cm in the spring , block will have maximum velocity. there after its speed will start decreasing.
Complete question:
A 3.20 kg block starts at rest and slides a distance d down a frictionless β = 30.0 ◦ incline, where it runs into a spring with spring constant k = 431 N/m. The block slides an additional 21.0 cm before it is brought to rest momentarily by compressing the spring. (a) What is the value of d? (b) Where is the speed of the block at the maximum value?
To know more about spring visit
https://brainly.com/question/13998954
#SPJ4
Consider a relation R(A, B, C, D) with four attributes A, B, C, and D. These four attributes have values that are real (or float) numbers. Attribute A is the primary key of relation R. We have: ⢠A hash index on attribute B. Additionally, we know that: ⢠R has 100,000 tuples, and ⢠There are 10 tuples of R per disk block.
The super keys of the relationship if a relation R(A, B, C, D) with four attributes A, B, C, and D is 8.
What is attribute?The quality of a feature is referred to as an attribute. The theory of attributes is concerned with the calculation of qualitative forms of qualities using quantitative measures. As a result, the characteristic requires slightly different types of statistical analyses than the variables do.
The given data,
Given three functional dependencies,
AB → C
BC → D
C → E
Finding the key of the relation, Compute closure of attribute,
{AB}⁺ = {A, B, C, D, E} {BC}⁺ = {B, C, D, E} {C}⁺ = {CE}
Only one candidate key is possible for a given relation = AB
Super keys of the relation = 2 (Total number of attributes in relations - Total number of attributes in each key).
Super keys of the relation = 2⁽⁵⁻²⁾
Super keys of the relation = 2³ = 8 keys
To know more about attributes:
https://brainly.com/question/30024138
#SPJ4
a boy whose weight is 600N runs up a fight of stairs 10m high in 12s. what is his average power
[tex]p = \frac{w}{t} [/tex]
[tex]w = fdcosθ [/tex]
where p is power
w is work done
t is time in seconds
f is force
d is distance
f=600N
d=10
t=12
w=600 X 10
w=6000 Nm
p=6000/12
p=500 watts
Important Formulas:
[tex]w=Fd[/tex]
[tex]p=\dfrac{w}{t}[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
power(measured in watts) = work(measured in joules) / time(measured in seconds)
__________________________________________________________
Given:
[tex]F=600N[/tex]
[tex]d=10m[/tex]
[tex]t=12s[/tex]
[tex]p=?[/tex]
__________________________________________________________
Finding work:
[tex]w=Fd[/tex]
[tex]w=600\times10[/tex]
[tex]w=6000J[/tex]
__________________________________________________________
Finding power:
[tex]p=\dfrac{w}{t}[/tex]
[tex]p=\dfrac{6000}{12}[/tex]
__________________________________________________________
[tex]\fbox{p = 500 watts}[/tex]
speed of light is always the same no matter how fast you are moving is very strange and counterintuitive. t/f
The statement "the speed of light is always the same no matter how fast you are moving" is true. This phenomenon is known as the constancy of the speed of light.
According to the theory of relativity, the speed of light in a vacuum is a constant value that is independent of the motion of the observer. This means that no matter how fast you are moving, you will always measure the speed of light to be the same value.
This idea may seem strange and counterintuitive, but it has been experimentally verified and is now a fundamental principle of modern physics. It has important consequences for our understanding of the nature of space and time, and it has played a key role in the development of many important scientific theories, including the theory of relativity.
To know more about relativity
https://brainly.com/question/29258869
#SPJ4
Given the temperature data shown, which of these ecosystems is definitely in the northern hemisphere
answer choices
Daly Waters
Iquitos
Tindouf
These are all in the southern hemisphere
The ecosystem that is present in the northern hemisphere is Tindouf
Tindouf is the capital of Algeria's Tindouf province, a city close to the borders of Mauritania, Western Sahara, and Morocco which is located in the northern hemisphere. From the chromatogram drawn by Teresa Glass, we concluded that the city of Tindouf, Algeria is a desert biome with very low winter precipitation and high temperatures. This region is of strategic importance. It has an Algerian military base and airport, with regular flights to Algiers and other domestic destinations. Garet Djebilet's settlement is located in his Tindouf municipality near the border with Mauritania. The settlement has an iron mine and an abandoned airport, and is located about 70 kilometers northwest of Awinetbel his Egla.
Learn more about the northern hemisphere in
https://brainly.com/question/13661560
#SPJ4
In an experiment, a student measured the volume of a substance while the mass was changed. The student measured up to five kilograms. The graph of the data is plotted below.
A volume versus mass graph is shown with mass on the vertical axes from 1 to 10 kilograms and volume on the horizontal axis from 1 to 5 milliliters. A line from the origin through all points and beyond.
Which of the following is an error the student made in creating an accurate graph?
The axes and graph are based only on measured values.
The axes are labeled with the incorrect variables.
The plotted points do not show all data collected.
The title has the incorrect order for the variables.
The title has the incorrect order for the variables.
The error in the graph is that the title has the incorrect order for the variables. Therefore, option D is correct.
Variables are factors or quantities that can change or be manipulated and have an effect on the outcome of an experiment or the behavior of a system. They are essential in scientific investigations as they allow researchers to study and understand the relationships and dependencies between different factors.
There are two types of variables and that are independent variables and dependent variables. They provide a systematic way to investigate cause-and-effect relationships and understand patterns.
Learn more about variables, here:
https://brainly.com/question/15078630
#SPJ6
Which statement is true
Cells usually take in large food molecules
Cells can get energy by breaking down molecules from food
Cells use energy to help an organism grow and live
Breaking down molecules does not release energy
A professor wants to conduct a study to investigate which kind of note-taking technique (hand-written or computer-based) is better for memory and recollection. He decides to split his class into two groups - hand-written notes and computer-based notes - and measure better memory and recollection via the next exam scores. The two note-taking groups are what variable in the study?
independent variable
dependent variable
control variable
extraneous variable
According to the professor's research, both handwritten notes and computer-based notes qualify as independent variables.
The professor's study considers handwritten notes and computer-based notes to be independent variables. These other qualities will be examined to see if they change depending on note-taking technique, including better memory and exam recall.
What kinds of variables are the groupings for taking notes?
Because they are being examined for their potential to influence other factors, the note-taking groups that use handwritten and computerised notes are regarded as independent variables.
Better exam memory and recall are those other variables, and their changes in response to note-taking methodology will be investigated.
To know more about independent variables, visit:
https://brainly.com/question/28871343
#SPJ1
considering both static and dynamic (time-dependent) situations, which of the figures represents possible configurations for electric field lines?
A field line is drawn at a location that is perpendicular to the net. Therefore, the tangent to the electric field line at any place coincides with the direction of the electric field there.
What encapsulates the electric field's relative strength?Each field line has a direction written on it with an arrow, just like gravitational field lines do. This direction indicates the direction of the electric field at all places along the field line. The density of the field lines represents the relative field strength.
How do you show the existence of electric field lines?Electric field is a vector quantity, hence a vector arrow can be used to depict it. The length of the arrows at any particular position is inversely proportional to the strength of the electric field there, and they all point in that direction.
To know more about electric field lines visit:-
https://brainly.com/question/14438235
#SPJ4
a copper bar of length and negligible resistance slides at constant speed along metal rails. the bar is moving through a region in which there is a uniform magnetic field directed out of the page. a voltmeter is connected across a resistor of resistance . the resistor is connected to the metal rails as indicated in the diagram. (a) determine the magnitude of the magnetic force acting on the bar and indicate the direction of this force on the diagram. your answer should be in terms of the given variables and known constants.
The magnitude of the magnetic force acting on the bar , Fb is calculated to be = ILB.
What do you understand by magnetic force?Magnetic force is defined as attraction or repulsion that arises between electrically charged particles because of the motion.
Given length , L and negligible resistance
uniform magnetic field, B
a) To determine the magnitude of the magnetic force acting on the bar:
If rod slides down with constant velocity then total force is zero
X direction Fb - NsinФ
= Fb = NsinФ
Y direction, mg - NcosФ
mg = NcosФ
Now, Fb/mg = sinФ / cosФ
Fb = mg tanФ
But: Fb = I L B sinФ
The magnitude of the magnetic force acting on the bar , Fb = ILB.
To know more about magnetic force, refer
https://brainly.com/question/2279150
#SPJ4
2. A diverging lens has a focal length of 2.5 cm. If it is placed 4.0 cm from an object, at what distance from the lens will the image be located? Is the image bigger or smaller? Is it real or virtual?
The image distance is 0.65 cm and the image is real but diminished.
What is a diverging lens?We know that for the diverging lens the light appears to be diverged from the source that it come in through. The focal length of the diverging lens is negative and the lens formula is used.
We have;
1/f = 1/u + 1/v
f = focal length
u = object distance
v = image distance
-1/2.5 = 1/4 + 1/v
1/v = 1/4 + 1/2.5
v = 0.25 + 0.4
v = 0.65 cm
The image is real but it is smaller than the object.
Learn more about image distance:https://brainly.com/question/12629638
#SPJ1
part j bulb r4 is now removed from the circuit, leaving a break in the wire at its position. what is the current in the bulb r1 ? express your answer in amperes. templatessymbols undoredoresetkeyboard shortcutshelp i
I2 = V / R2 = 0.678 A ; I3 = V / R3 = 0.678 A are the current flows in R2 and R3.
Here R1 = R2 = R3 = R4 = 4.43Ω
And E = 9.01 V
When we removed the bulb bearing Ru, the equivalent circuit now becomes as shown.
Now R2 and R3 are in parallel, so their equivalent resistance
1/Rp = 1/R2 + 1/R3
Rp = 2.215 Ω
Again, R1 is connected Rp in series so equivalent resistance
R = R1 + Rp = 6.645 Ω
Current through ‘R1’ is
I1 = V / R = 9.01 / 6.645 = 1.356 A
Potential across R2 and R3 is
V = E – I1R1 = 3.0033V
So current through R2
I2 = V / R2 = 0.678 A
Current through R3
I3 = V / R3 = 0.678 A
To learn more about Electrical Circuits:
https://brainly.com/question/2969220
#SPJ4
A 47.0 kg cheetah can run with a speed of 31.0 m/s. What is the cheetah's kinetic energy?
Answer:
22,583.5 J
Explanation:
KE = 1/2mv²
KE = 1/2(47 kg)(31.0 m/s)² = 22,583.5 J
A vector is 14.4 m long and
points in a 133 degree
direction.
Find the y-component of the
vector.
Explanation:
To find the y-component of a vector that is 14.4 m long and points in a 133 degree direction, you can use the trigonometric functions sine and cosine.
The y-component of a vector is given by the product of the vector's length and the sine of the angle between the vector and the positive x-axis. The x-component of a vector is given by the product of the vector's length and the cosine of the angle between the vector and the positive x-axis.
You can find the y-component of the vector by using the formula:
y-component = vector length * sine(angle)
In this case, the vector length is 14.4 m, and the angle between the vector and the positive x-axis is 133 degrees. You can find the y-component of the vector by plugging these values into the formula:
y-component = 14.4 m * sine(133 degrees)
You can use a calculator or look up the value of sine(133 degrees) in a table to find the y-component of the vector. You will find that the y-component of the vector is approximately -11.9 m.
Note that the y-component of the vector is negative because the vector points in a direction that is below the positive x-axis. The x-component of the vector would be positive because the vector points in a direction that is to the right of the y-axis.
Use the trigonometric functions sine and cosine to determine the y-component of a vector that is 14.4 m long and points in a 133 degree direction.
What is Y component of vector?A vector's y-component is calculated by multiplying its length by the sine of the angle it makes with the positive x-axis. A vector's x-component is calculated by multiplying its length by the cosine of the angle it makes with the positive x-axis.
Utilizing the following formula, you can get the vector's y-component: y-component = sine * vector length (angle).
The vector length in this instance is 14.4 m, and the angle it makes with the positive x-axis is 133 degrees. the location of the y-component.
To learn more about vector, refer to the link:
https://brainly.com/question/24256726
#SPJ2
what is the work of a fuse in a socket
Answer:
The fuse in a plug is a safety device designed to protect the lead rather than the appliance. It is a deliberate weak link in a circuit which will 'blow' if an electrical appliance or extension lead draws too much current due to either an overload or a fault.
Calculate the fringe separation for light of wavelength 680nm that falls on two slits 4 separated by 0.1 mm when the screen is placed 1.3 m away from the slits.
The fringe separation of the double-slit interference is 0.884 mm.
What is interference of lights?When two coherent light waves from separate sources collide, the energy distribution caused by the first wave is altered by the second. The term "interference of light" refers to this alteration in the distribution of light energy brought on by the superposition of two light waves.
Wavelength of light: λ = 680 nm = 680 × 10⁻⁹ m.
Separation between the two slits: d = 0.1 mm = 0.1 × 10⁻³ m.
Screen distance: D = 1.3 m.
Hence, the fringe separation: x = λD/d
= ( 680 × 10⁻⁹)×(1.3 )/(0.1 × 10⁻³ ) m
= 0.000884 m
= 0.884 mm.
Learn more about interference here:
https://brainly.com/question/16098226
#SPJ1
Which velocity component is dependent on gravity?
Answer:
Explanation:
Vertical acceleration.
consider the following two-step process. heat is allowed to flow out of an ideal gas at constant volume so that its pressure drops from 2.2 atm to 1.4 atm. then the gas expands at constant pressure, from a volume of 5.9 l to 9.3 l, where the temperature reaches its original value. (see figure(figure 1)).
(a) The gas moves from point a to point b in an isochoric process in which the volume stays constant.
The work done when the gas moves from point A to point B is Wab = PV = 0.
The labor involved in getting the gas to boil, Wbc = PV = 1.4. (9.3 - 5.9) L.atm = 4.76 1 L.atm is equal to 101.325 J.
Work completed, ∆W = 101.325 × 4.76 = 482.3 J
Therefore, the process' overall work was a, b, and c.
Wtotal = 0 plus 482.3 J = 482.3 J (Ans) (Ans)
(b) As previously stated, point C is where the gas temperature returns to its initial value.
As a result, in the process ac through b, the gas doesn't undergo any temperature change.
Tfinal = Tinitial
Therefore, internal energy change U = 0.
To know more about Constant volume visit:
https://brainly.in/question/49693981
#SPJ4
The three bins represent three important properties of stars. Drag the items that we must measure in orrder to determine each property into the appropriate bin. distance orbital period in binary system apparent brightness orbital distance in binary system color or spectral type Luminosity Surface Temperature Mass
LUMINOSITY, distance, perceived brightness, surface temperature, -color or spectral type, MASS, -orbital period in binary system, -orbital distance in a binary system.
What does mass mean in a definition?In physics, mass is a quantitative measure of inertia, a basic characteristic of all matter. It is essentially the resistance a body of matter gives to a change in its speed or location as a result of the application of a force.
What is the ideal description of mass?A measurement of the volume of material that makes up or is contained within a physical body. Newton's laws of motion are based on classical mechanics, which relates an object's mass to the force needed to accelerate it and, consequently, to its inertia.
To know more about Mass visit:
https://brainly.com/question/28221042
#SPJ4