The molecule or ion that is being oxidized in the reaction is TeO2. Ceramics may occasionally be colored using tellurium dioxide.
TeO2 does water dissolve TeO2?TeO2 is soluble in strong acids, alkali metal hydroxides, and only very little water. Due to its amphoteric nature, it can operate as either an acid or a base depending on the solution it is in. It interacts with bases to form tellurites and acids to create tellurium salts.
TeO2's form is what?Due to the presence of 6 e-pairs surrounding the center atom, 6 atoms bound to it, and 0 lone pairs, this molecule is octahedral.
To know more about telluric acid(TeO2) visit :-
brainly.com/question/29397392
#SPJ4
The complete question is:
A sample of ore containing the mineral tellurite, TeO2 , was dissolved in acid. The resulting solution was then
reacted with a solution of K2Cr2O7 to form telluric acid, H2TeO4 . The unbalanced chemical equation for the
reaction is given below.
. . . TeO2(s) + . . . Cr2O72−(aq) + . . . H+(aq) → . . . H2TeO4(aq) + . . . Cr3+(aq) + . . . H2O(l)
(a) Identify the molecule or ion that is being oxidized in the reaction.
In which of these substances are the atoms held together by polar covalent bonding?
A) SrCl₂
B) CsCl
C) ClF
D) TiF₂
E) S₈
Substances in which atoms are held together by polar covalent bonding is b)CsCl.So,correct option is b.
Polar covalent bond is a kind of compound bond where one sets of electrons is shared unevenly between two molecules. For instance, Hydrogen chloride (HCl) particle. The holding of hydrogen and chlorine iotas inclines more towards Cl particles since Cl is more electronegative in nature than hydrogen
Since Cs has one unpair of electron and Cl has five unpair electron. So, both of elements are favorable for formation of covalent bond.
Properties of Polar Covalent Compound
Physical state: These mixtures can exist as solids because of more noteworthy power of collaborations.Melting and boiling point: These have more prominent liquefying and limit than non-polar mixtures.Conductivity: They direct power in the arrangement state because of the portability of particles.Dissolvability: These are exceptionally dissolvable in polar solvents like water.Hence,correct option is B.
To know more about polar covalent bond, visit here:
https://brainly.com/question/28295508
#SPJ4
is the Halloween clock reaction a physical or chemical change
Answer:
IT IS A CHEMICAL CHANGE
Explanation:
The Old Nassau reaction or Halloween reaction is a chemical clock reaction in which a clear solution turns orange and then black
Answer:
It's a chemical change.
Which of the following statements correctly describe how an equilibrium system containing gases will respond to changes in volume and/or pressure if the temperature remains unchanged? Select all that apply. Check all that apply. If the total number of moles of gas in the products and reactants is the same, a change in volume will not affect the equilibrium position. If the volume is increased, the value of K increases. If an inert gas is added, the reaction shifts in the direction that produces fewer moles of gas. If the volume is decreased, the reaction shifts in the direction that produces fewer moles of gas. If an inert gas is added, there will be no effect on the equilibrium position.
A change in volume won't change the equilibrium position if the total moles of gas inside the reactants and products are the same.No change in the equilibrium position will result from the addition of an inert gas.When the volume is reduced, the process changes to create fewer moles or gas.
What are the reactions of an equilibrium system to variations in temperature & concentration?The equilibrium of a chemical reaction shifts in the opposite way to counteract a shift in pressure, temperature, or even the concentration or products or reactants when the reaction is at equilibrium.
Which one of the following descriptions of a chemical process at equilibrium is accurate?As a result, response choice is the claim that a reversible reaction is true at dynamic equilibrium (E).The forward reaction rate is the same as the backward reaction rate.
To know more about equilibrium system visit:
https://brainly.com/question/4289021
#SPJ4
how many grams of milk of magnesia, mg(oh)2 (s) (58.3 g/mol), would be soluble in 200 ml of water. ksp
200 ml of water would be sufficient to dissolve 1.166g of milk of magnesia, mg(oh)2 (s) (58.3 g/mol).
Magnesium has what purpose?It is a laxative (of the osmotic variety), and its mechanism of action is assumed to include pulling water into the intestines, which aids in causing bowel movement. The symptoms of having too much stomach acid, such as heartburn, an upset stomach, or indigestion, are also treated with this medicine.
MgCl2 +2NaOH→Mg(OH)2+2NaCl
moles of mg(oh)2 in 200ml of 58.3 M solution = 58.3 ∗200/10000.
=1.166g
according to above equation, for 1 mole of MgCl2
we require 1 mole of NaOH
so, NaOH is a limiting reagent.
To know more about Magnesium visit:-
https://brainly.com/question/1533548
#SPJ4
What would be the concentration of a solution made by adding 250 mL of water to 45.0
mL of 4.2 M KOH?
Answer:
Explanation:
The most common way to solve this problem is to use the formula
c
1
V
1
=
c
2
V
2
In your problem,
c
1
= 4.2 mol/L;
V
1
= 45.0 mL
c
2
= ?;
V
2
= 250 mL
c
2
=
c
1
×
V
1
V
2
= 4.2 mol/L ×
45.0
mL
250
mL
= 0.76 mol/L
How many grams are in 0.0823 moles of Ar?
Answer:
3.29 g
Explanation:
Ar has molar mass of 39.95 g/mol
so 0.0823 mole has mass of 0.0823 x 39.95 = 3.29 g
Answer:
hope this answer will help you.
Explanation:
As we know that
no. of moles=mass)/molecular mass
we can easily fing mass of Ar by multiplying no. of moles with molecular mass of Ar which is 39.948
0.0823×39.948=3.28g
so the mass of Ar in 0.0823moles is 3.287g
arrange the sequence of events that occur in complex i in their proper order. fe 2 is oxidized to fe 3 while coenzyme q is reduced to coqh2 nadh is oxidized to nad while fmn is reduced to fmnh2. fmnh2 is oxidized while fe 3 is reduced to fe 2 reduced coqh2 is released.
In the following reactions, NADH is converted to NAD+, FMN to FMNH2, Fe+2 to Fe+3, and CoQ to CoQH2.
What takes place when a substance oxidizes?When an electron is taken away from a molecule throughout a chemical reaction, the process is known as oxidation. What occurs during oxidation? There is an electron transfer during oxidation. In other words, there is an electron loss during oxidation.
What does the word "oxidized" in chemistry mean?The removal of electrons from the a material causes oxidation. Additionally, it is when a material gains oxygen. When magnesium combines with oxygen to generate magnesium oxide, for instance, it is oxidized: The compound magnesium oxide is created when magnesium and oxygen are combined.
To know more about oxidizes visit:
https://brainly.com/question/16976470
#SPJ4
Write the abbreviated electron configuration for Al2+.
The abbreviated electron configuration for Al2+ is [Ne]3s2 3p1
since Al has 13 electrons : [Ne]3s2 3p1
Al2+ means it has lost 2 electrons to become : [Ne]3s1
what is electron configuration?Electronic configurations in chemistry can be describe as the way each electron move independently in an orbital, in an average field created by all other orbitals. which also means the arrangement of electrons in orbitals around an atomic nucleus.
what is an electron?An electron in simple term is a negatively charged subatomic particle that binds together with protons and neutrons to form an atom's nucleus. it can also be seen as a tiny particle of matter that is smaller than an atom and has a negative electrical charge in it.
learn more about electron configuration here:
brainly.com/question/26084288
#SPJ1
Provided below is the IR and 'H NMR for a compound having the molecular formula of C,H,O, Using this information, determine the degrees of unsaturation for this structure and solve and draw the structure responsible for these spectral data. To validate your answer, you need to assign the type of bond (ie, stretch) responsible for each peak highlighted by a box in the IR. You must also assign each 'H NMR peak (a)-(e) to the correct set of protons in your proposed structure. The integration for each peak has been provided for you. You must label the multiplicity observed for each peak. Is your structure consistent with all of this data? If not, chances are you do not have the correct structure, or the peaks have been assigned incorrectly. In your peer review, offer feedback concerning the accuracy of the submitted structures and spectral assignments. If you believe the answers are incorrect, then you need to provided explanation. In the end, you should all be getting the same correct structure. Please draw the final structure in the box provided underneath the NMR. TH NMR - for clarity, expansions have been provided for peaks that are not a singlets. Proposed Structure: Remember to assign it to the NMR per instructions. IR FREQUENCY TABLE (in wavenumber) Frequency Range (om ) Intensity Group A. Alky! C-H (stretching) Isopropy. -CH(CH), tert-Butyl, -C(CH) ( -5) and 2853-2002 1380-1385 1365-1370 1385-1395 - 1366 (m) and B. Alkenyl C-H(stretching) C- (stretching) R-CH-CH, m) (v) 3010-3095 1620-1600 085-1000 905-920 80-900 (6) (out of plane >C-H bondinga) and BCHCH cafe Esses se s8 s (8) 675-730 960-975 (6) (s) -3300 2100-2260 (8) () cle-RCH-CHR trans-RCH-CHR C. Alkyny! C H (stretching) C-C (stretching) D. Aromatic Ar-H(stretching) Aromatic substitution type (C-Hout-of-plane bendings) Monosubstituted o-Disubstituted m-Disubstituted -3030 and (very s) (very s) (s) 690-710 730-770 735-770 680-725 750-810 800-860 and (very s) (very s) 3590-3650 3200-3550 2500-3000 (sharp ) (broad, s) (broad, p-Disubstituted E. Alcohol, Phenols, and Carboxylic Acids O H (stretching) Alcohols, phenols (dilute solutions) Alcohols, phenols (hydrogen bonded) Carboxylic acids (hydrogen bonded) F. Aldehydes, Ketones, Esters, and Carboxylic Acids C-O (stretching) Aldehydes Ketones Esters Carboxylic acids Amides G. Amines N- H H. Nitriles CON 1630-1780 1690-1740 1680-1750 1735-1750 1710-1780 1630-1690 (s) (s) (s) (s) (s) (5) 3300-3500 (m) 2220-2260 (m) weak edium w - variatie p rowity Abbreviations strong m NMR CHEMICAL SHIFT TABLE (in ppm) CHARACTERISTIC PROTON CHEMICAL SHIFTS Type of Preton Structure Chemical Shin, ppm Cycopropane CHE Primary R-CH Secondary R-CH: Tertiary R; C-11 Vinylic C=C-H Acetylanic triple bond.CC-H Aromate Ar-H Benzyle Arc- Allylic CHCCH Fluorides H-C-F Chlorides H-C-a Bromides H-C-Br Iodides H-C- Alcohol H-C-OH Ethors H-C-OR 33-4 Esters RCOO-C- 3.7-4.1 Esters H-C-COOR 2-22 Acids H-C-COOH 2-26 Carbonyl Compounds H-C-C-0 2-27 Aldehydie R-CH-)C=0 9-10 Hydroxylic R-C-OH 1-55 Phenolie Ar-OH 4-12 Enolic C-C-OH 15-17 Carboxylic ROOOH 10.5-12 Amino RNH, 1-5
The degree of unsaturation, C-H/2+1. and where C = no. of carbon, H = no. of hydrogen Molecular formula: C7H14O2, 7-14/2+1 = 1. Therefore structure will have one double bond or ring
IR analysis
the band at around 1700 cm-1 is due to the carbonyl group
the band at around 2850 - 2950 cm-1 is due to aliphatic CH stretching
(image) - LINK ATTACHED
1H NMR analysis
the triplet at 4.5 ppm is due to methylene proton attached to an oxygen
the singlet at 2.1 ppm is due to methyl proton attached to the carbonyl group
the quartet at around 1.55 ppm is due to methylene proton attached to another methylene group
the multiplet at 1.5 ppm is due to CH proton attached to two methyl group and one methylene group
the doublet at around 0.9 ppm is due to two methyl proton attached to CH
based on the above analysis the structure of the compound is - image
To learn more about unsaturation
https://brainly.com/question/24186437
#SPJ4
A ruler has markings as shown below. Stefan uses this ruler to measure the length of a metal rod. How many decimal places should his answer include? A.1 B.2 C.3 D.4
Answer:
A
Explanation:
Based on a ruler in centimeters, with ten divisions between each centimer mark, you will have marks at every 0.1 cm.
Then, the measure of the length of a metal rod should have 1 decimal place.
That decimal place means limiters, given that 1 mm = 0.1 cm.
Answer:
A
Explanation:
Based on a ruler in centimeters, with ten divisions between each centimer mark, you will have marks at every 0.1 cm.
Then, the measure of the length of a metal rod should have 1 decimal place.
That decimal place means limiters, given that 1 mm = 0.1 cm.
can a tank of oxygen gas ever be half empty? Explain.
Explanation:
An oxygen tank can never be half empty. Since the amount of space between the gas particles matches the volume of its container, they would take up all the space in the tank. In this case, the gas particles would spread throughout the tank.
what set of the following statements includes all the correct statements? i) six atoms in a plane always surround each atom in the closest packed structures ii) the repeating sequence of layers in closest packed metals is either abab or abca iii) an abca closest packing arrangement of metal atoms is the same as a body-centered cubic unit cell
The closest packed formations always have six atoms in a plane surrounding each atom.
What is the effectiveness of spheres filling the simple cubic structure?74% of the available space is effectively filled by the configuration in a cubic closest packing. The second layer of spheres is stacked on top of half of the first layer's depressions, much like in hexagonal closest packing.
Simple cubic packing – what is it?Placing spheres in Cartesian space with their centers at integer coordinates is known as simple cubic packing. Face-centered cubic packing is achieved by layering closely packed spheres such that every third layer's spheres overlap one another.
To know more about atom visit:-
https://brainly.com/question/13654549
#SPJ4
categorize the pairs of variables given below as directly or inversely proportional for an ideal gas. for each pair, assume all other variables are held constant.
Directly inversely correlated are the following quantities: pressure and absolute temperature, volume and moles, volume and absolute temperature, and density and molar mass. Volume and pressure are inversely correlated.
In chemistry, what exactly is a molar mass?A substance's molar mass is defined as its molecular weight in grams. By adding the molar masses of a substance's constituent atoms, as demonstrated in this video, we may get the substance's molar mass. Then, to convert between mass and the quantity of moles of the material, we may utilize the computed molar mass.
What else do you call molar mass?The sum of all the atoms' individual masses in grams that make up a mole of a certain molecule is known as the molar mass, sometimes referred to as molecular weight.
To know more about Molar mass visit:
https://brainly.com/question/22997914
#SPJ4
20 PTS Which explains the differences in the distribution of solar energy on Earth's surface? (1 point)
A. Earth’s climate system determines how much energy is absorbed from the sun.
B. Earth’s gravitational force pulls the sun’s rays away from the equator.
C. Earth’s solar energy is dependent on air currents.
D. Earth’s curved shape and tilt on its axis do not allow the sun’s rays to fall evenly on its surface.
The differences in the distribution of solar energy on Earth's surface is due to Earth’s curved shape and tilt on its axis do not allow the sun’s rays to fall evenly on its surface.
The correct option is D.
What is solar energy?Solar energy refers to the energy produced by the Sun.
Solar energy is in the form of heat energy, light energy, and ultraviolet radiation.
The shape of the affects the amount of solar energy that reaches any region of the earth. The earth is spherical in shape. Hence, there is an uneven distribution of solar energy from the sun o the Earth. also, the tilt of the earth affects the amount of solar energy that reaches any region of the earth.
Learn more about solar energy at; https://brainly.com/question/27380261
#SPJ1
write the comparison between daltons atomic theory and modern atomic theory?
Dalton’s atomic theory is the oldest theory about the atom. In 1808, John Dalton published his theory, which was composed of several postulates that were built based on his experiments and laws of chemical combination. A number of scientists later contributed to the development of modern atomic theory, which is different from Dalton’s atomic theory and has more advanced facts about the atom and its behavior. The key difference between Dalton’s Atomic Theory and Modern Atomic Theory is that the structure and properties of atom according to Dalton’s theory are different from the structure and properties proposed by the modern atomic theory.
Difference :Dalton’s atomic theory is a theory about indivisible particles called atoms which are the smallest particles of all matter. Modern atomic theory is the theory that explains the fully detailed structure of an atom.
Structure of AtomAccording to Dalton’s atomic theory, atoms are indivisible particles. Modern atomic theory says that atoms are composed of subatomic particles; protons, electrons, and neutrons.
IsotopesDalton’s theory does not explain details about isotopes. It states that all atoms of the same element are identical. Modern atomic theory explains details about isotopes having a different number of neutrons and the same number of protons.
ElectronsDalton couldn’t give details about electrons. Modern atomic theory explains the location, reactions, and behavior of electrons.
Chemical ReactionsDalton’s atomic theory explains that atoms are the smallest particle that can be engaged in reactions. Modern atomic theory states that subatomic particles can participate in reactions.
which of the following is true of bond enthalpy? group of answer choices always positive always negative sometimes positive, sometimes negative always zero
A stronger bond is always created when the bond's enthalpy is higher since a stronger bond requires more energy to break.
Whoa, what do you mean, bond?Bonds are financial instruments in which a buyer loans money for a certain duration to a business or the government in return for periodical interest payments.
Chemistry: How do bonds function?Between atoms or ions, a condensation reaction is a source of attraction. Atoms share or transmit their valence electrons, which results in bonds. The electrons that can be engaged in chemical reactions are known as valence electrons, which are located at the outermost energy level of the atom.
To know more about Bond visit:
https://brainly.com/question/10777799
#SPJ4
The sodium (Na) content of 1 particular can of soup is 890 mg sodium in 1 c. What is the molarity of sodium (Na) in the soup? (Note: 4 c = 1 qt, and 1 qt = 0.946 L.) (3 points)
Answer:
0.164 M
Explanation:
Molarity is defined as moles of solute per liter of solution. In order to arrive at the desired units, dimensional analysis must be performed.
To find moles of sodium:
[tex]890\ mg\ Na(\frac{1\ g}{1000\ mg})(\frac{1\ mol\ Na}{22.99\ g\ Na})=0.0387\ mol\ Na[/tex]
To find liters of solution:
[tex]1\ cup(\frac{1\ qt}{4\ cups})(\frac{0.946\ L}{1\ qt})=0.2365\ L[/tex]
The ratio of sodium to solution can then be written as [tex]\frac{0.0387\ mol}{0.2365\ L}[/tex]. This can be simplified by dividing the numbers, [tex]0.164\frac{mol}{L}[/tex] or 0.164 M.
Calculate the change in the internal energy of a gaseous system that absorbs 21 J of heat and does 8.0 J of work by expanding.
A. 32 J
B. –32 J
C. –29 J
D. 29 J
E. 13 J
F. –13 J
The change in the internal energy of a gaseous system that absorbs 21 J of heat and does 8.0 J of work by expanding is 13 J
Energy can only be transformed; it cannot be created or destroyed, according to the First Law of Thermodynamics. For any system, energy transfer examples include mass crossing the control border, external work, or heat transfer over the barrier. The vigor and vitality required for ongoing physical or mental activity is referred to as energy. Heat is the transfer of kinetic energy between two substances, or from an energy source to a material or object. Any action that needs both mental and physical effort to achieve a goal or result is considered work.
ΔE˭q˖w
q= heat added or lost from system
w= work done by system or on system
q is negative when heat is lost
w is negative when a system affects its environment
here, q˭21 and w˭8
ΔE˭21˖(˗8)
ΔE˭13 J
To know more about mass visit:
https://brainly.com/question/19694949
#SPJ1
Researchers investigated the influence of environmental pH on the activity of peroxidase, an enzyme that catalyzes the conversion of hydrogen peroxide to water and oxygen gas. In an experiment, the researchers added a hydrogen peroxide solution containing guaiacol to several identical test tubes and adjusted the solution in each test tube to a different pH. The researchers included the guaiacol because it caused the solutions to change color as the reactions proceeded, which the researchers relied on for measuring reaction rates. Finally, the researchers added the same amount of peroxidase to each test tube and measured the rate of each reaction at 23°C. The results of the experiment are represented in Figure 1. One of the researchers proposes using oxygen gas production to measure reaction rates. Which of the following statements best justifies the use of the proposed modification as a way of creating an appropriate control for the investigation?
O the experiment can be repeated without hydrogen peroxide, which will help eliminate an uncontrolled variable. O the experiment can be repeated without hydrogen peroxide, which will help eliminate an uncontrolled variable. O the experiment can be repeated without peroxidase, which will introduce a second independent variable. O the experiment can be repeated without peroxidase, which will introduce a second independent variable. O the experiment can be repeated without guaiacol, which will reveal the effect of guaiacol on the reaction rates. O the experiment can be repeated without guaiacol, which will reveal the effect of guaiacol on the reaction rates. O the experiment can be repeated without water, which will reveal whether the reaction can occur inside a living cell.
In studying the influence of environmental pH on peroxidase activity, researchers can repeat the experiment without guaiacol, which will reveal the effect of guaiacol on reaction rates.
The proposal to use the production of gaseous oxygenOne of the investigators' proposal to use oxygen gas production to measure reaction rates leads to a change in the dependent variable.
In the first experiment the dependent variable was the volume of guaiacol and in the second experiment the dependent variable will be oxygen production.
Learn more about experiments at https://brainly.com/question/30055326
#SPJ4
Aloud is an astronomer. He is trying to find evidence that a galaxy has supermassive black hole at its center. What should he look for? A. Neutron star B quasar C pulsar D black matter
Aloud is trying to find evidence that a galaxy has supermassive black hole at its center. He should look for the black matter in the center of the Earth. Thus, the correct option is D.
What is the Black matter?Black matter or dark matter is composed of the particles which do not absorb, reflect, or emit light rays, so they cannot be detected by observing electromagnetic radiations. Dark matter is the material which cannot be seen directly through the eyes.
Dark matter play an important role in the formation of galaxies. Many researchers use the astronomical surveys to build maps of the location where dark matter in the universe is found based on how the light from the distant galaxies bends as it travels to us.
Thus, the matter which fall into a black hole arranges itself in the shape of a disk which is thick at the outer edge, while it is thin along the inner ring of the disk.
Therefore, the correct option is D.
Learn more about Black matter here:
https://brainly.com/question/27974852
#SPJ1
Which statement best describes the difference between a theory and a law? A. Scientific theories explain WHY a phenomenon occurs and a scientific law explains WHAT occurs. B. Scientific theories explain WHAT occurs and a scientific law explains WHY a phenomenon occurs. C. They both explain why something happens. D. They both tell us what happens.
Scientific theories explain why a phenomenon occurs and a scientific law explains what occurs. The correct option is A.
What is scientific theory?A scientific theory is an explanation for a phenomenon in the natural world or the universe that has undergone extensive testing and verification using approved procedures for observation, measurement, and result evaluation.
A scientific law often describes an observed phenomenon. It doesn't explain the phenomenon's existence or its origins.
A scientific theory is the explanation for a phenomenon. It is a myth that with enough study, theories can become laws.
Thus, the correct option is A.
For more details regarding scientific theory, visit:
https://brainly.com/question/17152046
#SPJ1
balance the equation
The balanced form of the chemical equations given in the image are as follows:
Cu + 2H₂SO₄ → CuSO₄ + SO₂ + 2H₂O4Al + 3O₂ → 2Al₂O₃2Fe + 3Cl₂ → 2FeCl₃2C₂H₆ + 7O₂ → 4CO₂ + 6H₂OAl₂O₃ + 2NaOH + 3H₂O → 2Na(Al(OH)₄)Cu + 4HNO₃ → CU(NO₃)₂ + 2NO₂ + 2H₂O2F₂ + 2KOH → 2KF + F₂O + H₂OWhat is a balanced equation?A balanced chemical equation is an equation that obeys the law of conservation of mass i.e. the number of atoms of each element on both sides of the equation are the same.
A chemical equation is balanced with the aid of coefficients, which are numbers placed in front of each compound or element as a multiplying factor.
According to this question, some chemical equations were given in the image attached. The balanced form of these equations are in the main answer part.
Learn more about balanced chemical equation at: https://brainly.com/question/28294176
#SPJ1
What trends can you see in group 7 of the periodic table?
Group 7 of the periodic table, usually referred to as the halogen group, exhibits a number of tendencies. Among these trends are:
Increasing atomic radius: The atomic radius of the elements rises as you descend the group. This is so because every element increases the size of the atom by adding a new electron shell.
Increasing electron affinity: As you proceed down the group, the electron affinities of the elements in group 7 likewise rise. The energy released when an atom picks up an electron to create a negative ion is known as electron affinity. The group 7 elements have a high electron affinity due to their high reactivity and propensity to gain electrons quickly.
Melting and boiling points dropping: As you travel down the group, the melting and boiling points of the elements in group 7 tend to do the same. Because of their greater size and the weaker forces that bind them, atoms are kept together less tightly.
Increasing reactivity: Fluorine is the most reactive element in the periodic table, and group 7 elements are all quite reactive. The responsiveness of the elements often reduces as you progress along the group. All of the elements in group 7 are still quite reactive, and they frequently combine with other elements to produce compounds.
Increasing atomic radius, increasing electron affinity, lowering melting and boiling temperatures, and raising reactivity are the main trends in group 7 of the periodic table. These patterns are brought on by the distinct characteristics of the elements in this group, which are governed by the quantity and configuration of electrons in their outer shells.
To learn more about the periodic table,
https://brainly.com/question/569321
https://brainly.in/question/6728806
The reaction is stereospecific because:cis-but-2-ene and trans-but-2-ene yield different stereoisomers. it yields predominantly or exclusively on constitutional isomer when more than one is possible.
The reaction of cis-but-2-ene and trans-but-2-ene is a classic example of stereospecificity. It is important to note that this reaction yields predominantly or exclusively one of the constitutional isomers when more than one is possible, demonstrating that this reaction is stereospefic.
Stereospecificity is the phenomenon by which molecules react in such a way that the reaction products have the same orientation of their atoms in space as the reactants. This phenomenon is exhibited in the reaction of cis-but-2-ene and trans-but-2-ene, which yield different stereoisomers. This reaction is stereospecific because it yields predominantly or exclusively one of the constitutional isomers when more than one is possible.
Stereospecificity is an important property of organic reactions. It is of particular importance in the manufacture of pharmaceuticals, where it is necessary to ensure that the final product is the desired stereoisomer. Stereospecificity also helps to make organic reactions more efficient, since the reaction will yield the desired product in a single step.
In the reaction of cis-but-2-ene and trans-but-2-ene, different reactions can occur depending on the orientation of the atoms in the reactants. When the double bond is oriented in the cis-configuration, a reaction can occur in which new carbons are introduced, yielding the cis-stereoisomer. On the other hand, when the double bond is oriented in the trans-configuration, a reaction can occur in which the atoms in the double bond rearrange, yielding the trans-stereoisomer.
Learn more about stereoisomers at : https://brainly.com/question/16986110
#SPJ4
a gas is collected over water at a certain temperature. the total pressure is 760 torr. the vapor pressure of water at this temperature is 17 torr. the partial pressure of the gas collected is
A gas is collected over water at a certain temperature, then the partial pressure of gas is calculated to be = 741 torr
How is vapor pressure related to partial pressure?The term "water vapor pressure" refers to the amount of water vapor present in any gas combination that is in equilibrium with either solid or liquid water. When the vapor pressure equals the atmospheric pressure, water begins to boil.
Given total pressure is 760 torr
Vapor pressure of water = 17 torr
As we know that, partial pressure of gas = total pressure - vapor pressure of water
= 760 - 17
Partial pressure of gas = 741 torr.
To know more about partial pressure, refer
https://brainly.com/question/14119417
#SPJ4
Virtual Lab: Plate Boundaries and Movement
Watch what happens to the food coloring and the pieces of paper for three minutes. In your lab guide, record any changes in the
behavior of the food coloring and pieces of paper every 30 seconds.
TIMER
03:00
Start
TOP VIEW
SIDE VIEW
The food coloring would spread across all the papers at the end of the 30 minutes.
What happens to the food coloring?We know that diffusion does occur in all the states of matter whether solid, liquid or gas. We know the speed of the diffusion would depend on the particular kind of matter that is in question as we can see.
From the question, we have a food coloring which is liquid. The food coloring would eventually diffuse across the boundaries and get to all the papers that have been laid out as shown.
Hence, the food coloring can be said to spread by the principle of diffusion.
Learn more about diffusion:https://brainly.com/question/24746577
#SPJ1
What is the statistical rule of thumb to determine adequate sample size? Question 33 options: A statistical power level of 60 percent A statistical power level of 50 percent A statistical power level of 10 percent A statistical power level of 90 percent A statistical power level of 80 percent
The statistical rule of thumb to determine an adequate sample size include the following: E. A statistical power level of 80 percent.
What is sampling?In Mathematics and Statistics, sampling can be defined as a process that is typically used for the collection or selection of data (physical objects, observations, or individuals) from a larger statistical population, especially by using specific procedures and processes.
What is a sample proportion?In Mathematics and Statistics, a sample proportion can be defined as the proportion of individuals in a sample that have a specified characteristic or trait.
Mathematically, the sample proportion of a sample can be calculated by using this formula:
[tex]\hat{p} = \frac{x}{n}[/tex]
Where:
x represents the number of individuals with a specified characteristic.n represents the total number of individuals in a sample.In Mathematics and Statistics, a statistical power level of 80 percent (80%) is a statistical rule of thumb that is generally used in determining an adequate sample size.
Read more on sample proportion here: brainly.com/question/23838641
#SPJ1
Explain what is wrong with the following electron configuration:
1s 2 2s 2 2p 6 3s 2 3p 6 4s 3 3d 10 4p 1
In the given electronic configuration, the 4 s subshell has 3 electrons which is not possible as the s subshell can accomodate a maximum of only two electrons.
What is electronic configuration?
Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ1
How many moles of sodium hypobromite (NaBrO) should be added to 1.00 L of 0.050 M hypobromous acid
(HBrO) to form a buffer solution of pH 9.15? (Assume that no volume change occurs when the NaBrO is added)
(Ka=2.5x10)
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.050moles of sodium hypobromite (NaBrO) should be added to 1.00 L of 0.050 M hypobromous acid (HBrO) to form a buffer solution of pH 9.15
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre
Where,
moles= ?
volume= 1.00 L
Molarity=0.050 M
Substituting values in equation, we get
0.050=number of moles of solute/1.00
number of moles of solute=0.050moles
Therefore, 0.050moles of sodium hypobromite (NaBrO) should be added to 1.00 L of 0.050 M hypobromous acid (HBrO) to form a buffer solution of pH 9.15
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
Hess's Law states that the enthalpy change of an overall process is equal to the sum of the enthalpy changes of its individual steps.
Use the \Delta H data given to calculate the \Delta H for the reaction: C2H4 + H2 \Delta H\rightarrow C2H6
C2H6 + 3.5 O2 \rightarrow 2CO2 + 3H2O \Delta H= -1560 kj
C2H4 + 3 O2 \rightarrow 2CO2 + 2H2O \Delta H= -1411 kj
2H2 + O2 \rightarrow 2H2O \Delta H= -572 kj
\Delta H= ?
Delta H for the reaction: C2H4 (g) + H2 (g) --> C2H6 (g) is -137kJ
What does Hess's law indicate about a reaction's enthalpy?
According to Hess's law, all intermediate reactions that can be separated into the main reaction have standard enthalpies that add up to the same value when the main reaction is carried out at the same temperature.
If the initial and ending circumstances are the same, the enthalpy change for a reaction is independent of the number of ways a product might be produced. An exothermic process is indicated by a reaction's negative enthalpy change, whereas an endothermic process is shown by a reaction's positive enthalpy change.
C2H4 (g) + 3 O2 (g) --> 2 CO2 (g) + 2 H2O (l) Delta H = -1411. kJ
2 CO2 (g) + 3 H2O (l) --> C2H6 (g) + 3½ O2 (g) Delta H = +1560. kJ
H2 (g) + ½O2 (g) --> H2O (l) Delta H = -285.8 kJ
C2H4 (g) + H2 (g) --> C2H6 (g) Delta H = -137. kJ
To learn more about Hess's law use link below:
https://brainly.com/question/16795968
#SPJ4