Answer:
Work = 1409.54 J
Explanation:
Work = Force*distance*cosine
[tex]Work = 30*50*cos(20)\\Work = 1409.54 J[/tex]
how long does it take to fully charge an electric vehicle battery with 60 kwh energy at home. assume the residential voltage at 120v and current at 20a
The time it takes to fully charge an electric vehicle battery with 60 kWh of energy at home depends on the charging speed and the power source. With a residential voltage of 120v and a current of 20a, the charging power is 2.4 kW.
To calculate the charging time, we divide the battery's energy capacity (60 kWh) by the charging power (2.4 kW), which gives us a charging time of 25 hours.
However, most electric vehicle owners install a higher voltage charging station, which reduces the charging time significantly. For example, a Level 2 charging station with 240v and 30a can charge the same battery in about 10 hours.
Additionally, some electric vehicles have fast charging capabilities that can charge the battery up to 80% in as little as 30 minutes. It is essential to understand the charging speed and the charging infrastructure available to make informed decisions about charging your electric vehicle.
To know more about electric vehicle battery refer here:
https://brainly.com/question/13806305#
#SPJ11
Consider the example you just thought of with your partner. What steps would you then follow to solve the problem?
There are different ways to solve a problem but most of them share some common steps. Here are some of the most common steps that can help you solve a problem: Define the problem, Analyze the situation, identify possible solutions, Evaluate and select a solution, Implement and follow up on the solution.
Analyze is to methodically study or investigate anything in depth. You can determine what you need to study for the final exam by looking at your math's assessments from earlier in the year. The noun analysis is where this verb analysis originates. The term analysis was also derived from the Greek verb analyzing, which means "to dissolve."
If you enter analysis, it means that a mental health professional will assess you, assist you, and analyze your specific issues in order to help you discover solutions."Exactly that is what I'm referring to. And perhaps we could blow up or barricade the Griever Hole's entrance. Buy some time to consider the maze.
Learn more about Analyze here:
brainly.com/question/25503719
#SPJ4
at constant temperature and pressure the sign of the free energy related to spontaneity of process. of a process is spontaneous in the forward direction, then the sign of δg is what?
If a process is spontaneous in the forward direction at constant temperature and pressure, then the sign of ΔG is negative. This indicates that the process is exergonic and releases energy.
Conversely, if a process is spontaneous in the reverse direction, then the sign of ΔG is positive, indicating that the process is endergonic and requires energy input.
This is because the criterion for spontaneity at constant temperature and pressure is that the total entropy of the universe increases, or ΔS_univ > 0. T
he change in free energy is related to the change in entropy and enthalpy by the equation:ΔG = ΔH - TΔSwhere ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.
If the process is spontaneous in the forward direction, then ΔS is positive (since the entropy of the system increases) and ΔH is negative (since the system releases heat).
Therefore, ΔG is negative:ΔG = ΔH - TΔS < 0
So, if a process is spontaneous in the forward direction, the sign of ΔG is negative.
For more questions on temperature and pressure - https://brainly.com/question/29321317
#SPJ11
Which set of changes will always increase the current in an electrical circuit?
A. Decreasing voltage and decreasing resistance
B. Increasing voltage and decreasing resistance
C. Decreasing voltage and increasing resistance
OD. Increasing voltage and increasing resistance
SUBMIT
Answer: D
Explanation: Ohm's law states that the electrical current (I) flowing in an circuit is proportional to the voltage (V) and inversely proportional to the resistance (R). Therefore, if the voltage is increased, the current will increase provided the resistance of the circuit does not change.
question 71 pts an object placed in front of a concave mirror forms an image that is real, inverted, and larger than the object. where is the object located? group of answer choices behind the mirror between the center of the mirror and the focal point between the focal point and the mirror further than the center of the mirror
If an object placed in front of a concave mirror forms an image that is real, inverted, and larger than the object,
then the object must be located between the center of the mirror and the focal point.
This is because concave mirrors have a focal point where all parallel rays converge, and objects placed within this distance will produce a larger, inverted image that is real (meaning it can be projected onto a screen).
Objects placed beyond the focal point will produce a smaller, virtual image that is upright.
Understanding the relationship between the object, mirror, and resulting image is important in optics and can be used to create magnifying lenses, telescopes, and other optical instruments.
learn more about image here:brainly.com/question/25029470
#SPJ11
discuss the effect of the earth’s magnetic field on the result of this experiment measuring mass of electron
Hence, the Earth's magnetic field could potentially affect the results of the experiment measuring the mass of the electron, particularly if the experiment involves the use of charge particles or magnetic fields.
The earth's magnetic field can have an effect on experiments measuring the mass of electrons. This is because charged particles, like electrons, can be influenced by magnetic fields. When an electron is moving in a magnetic field, it will experience a force perpendicular to its velocity, causing it to move in a circular path. This means that the path of the electron can be altered by the magnetic field, leading to inaccurate measurements of its mass.
To mitigate this effect, scientists must ensure that the experimental apparatus is shielded from the earth's magnetic field as much as possible. This can involve using materials that do not conduct magnetic fields or placing the experiment in a location that is shielded from the effects of the earth's magnetic field. By reducing the impact of the earth's magnetic field on the experiment, scientists can obtain more accurate measurements of the mass of electrons.
In conclusion, the earth's magnetic field can have a significant impact on experiments measuring the mass of electrons. By taking steps to minimize this effect, scientists can obtain more accurate results and further our understanding of fundamental particles and their properties.
Know more about Earth's Magnetic Field here:
https://brainly.com/question/3036309
#SPJ11
With the use of unshielded twisted-pair copper wire in a network, what causes crosstalk within the cable pairs?a. the magnetic field around the adjacent pairs of wire b. the use of braided wire to shield the adjacent wire pairs c. the reflection of the electrical wave back from the far end of the cabled. the collision caused by two nodes trying to use the media simultaneously
Crosstalk occurs in unshielded twisted-pair copper wire networks when the electrical signals in one pair of wires leak into the adjacent pair of wires. This is caused by the magnetic field generated around the adjacent pairs of wire.
Here, correct option is B.
This magnetic field can induce a current in the adjacent wires, thus transferring the signals from one pair of wires to the other. In addition, the electrical wave can be reflected back from the far end of the cable, causing interference in the adjacent pair of wires.
Finally, the collision caused by two nodes trying to use the media simultaneously can also lead to crosstalk. It is therefore important to ensure that the twisted pairs are not too close together and shielded appropriately to minimize crosstalk and ensure a reliable network.
Therefore, correct option is B.
Know more about magnetic field here
https://brainly.com/question/14848188#
#SPJ11
at about 10.∘c, a sample of pure water has a hydronium concentration of 5.4×10−8 m. what is the equilibrium constant, kw, of water at this temperature?
The equilibrium constant (Kw) of water at 10°C is 5.4×10^(-14) mol^2/L^2.
At 25°C, the commonly used value for Kw is 1.0×10^(-14) mol^2/L^2, which represents the equilibrium constant for the autoionization of water, where water molecules dissociate into hydronium ions (H3O+) and hydroxide ions (OH-).
Kw is defined as Kw = [H3O+][OH-], where [H3O+] and [OH-] are the concentrations of hydronium and hydroxide ions in mol/L, respectively. However, at lower temperatures, the concentration of hydronium ions decreases due to the lower ionization rate of water.
In this case, the given concentration of hydronium ions at 10°C is 5.4×10^(-8) mol/L, so Kw can be calculated as
Kw = [H3O+][OH-] = (5.4×10^(-8))(5.4×10^(-8)) = 2.916×10^(-15) mol^2/L^2, which is the equilibrium constant for water at 10°C.
For more questions like Equilibrium click the link below:
https://brainly.com/question/31027606
#SPJ11
A balanced three-phase Y-Δ system has Van = 208 ∠∠0° V and ZΔ = (51 + j45) Ω. If the line impedance per phase is (0.4 + j1.2) Ω, find the total complex power delivered to the load. The total complex power delivered to the load S = ( + j) kVA.
The total complex power delivered to the load is S = (8367.08 - j470.97) kVA.
To find the total complex power delivered to the load, we can use the formula:
S = 3 * Van² * ZΔ / (3 * Zline + ZΔ)
where S is the complex power delivered to the load, Van is the line-to-neutral voltage, ZΔ is the load impedance in the delta configuration, and Zline is the impedance of each line.
Given:
Van = 208 ∠∠0° V
ZΔ = (51 + j45) Ω
Zline = (0.4 + j1.2) Ω
Substituting these values into the formula, we get:
S = 3 * (208 ∠∠0°)² * (51 + j45) Ω / [3 * (0.4 + j1.2) Ω + (51 + j45) Ω]
Simplifying the expression in the denominator:
3 * (0.4 + j1.2) Ω + (51 + j45) Ω
= (1.2 + j3.6) Ω + (51 + j45) Ω
= 52.2 + j48.6 Ω
Substituting this back into the formula and simplifying, we get:
S = 3 * (208 ∠∠0°)² * (51 + j45) Ω / (52.2 + j48.6 Ω)
= 8526.24 ∠∠-3.164° VA
= (8526.24 cos(-3.164°) + j8526.24 sin(-3.164°)) kVA
= (8367.08 - j470.97) kVA
learn more about Voltage here:
https://brainly.com/question/29910116
#SPJ11
Gamma rays are photons with very energy. What is the wavelength of a gamma-ray photon with energy 7.7 Times 10^-13 J ? (c = 3.0 Times 10^8 m/s, h = 6.626 Times 10^-34 J middot s) 2.6 Times 10^-13 m 3.9 Times 10^13 m 3.1 Times 10^-13 m 3.5 Times 10^-13 m
The correct answer is 2.6 Times 1[tex]0^-13 m.[/tex] in the given case
The energy of a photon is related to its wavelength by the equation:
E = hc/λ
where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.
Rearranging this equation to solve for λ, we get:
λ = hc/E
Plugging in the values we know, we get:
λ = [tex](6.626 × 10^-34 J·s)(3.0 × 10^8 m/s)/(7.7 × 10^-13 J) ≈ 2.6 × 10^-13 m[/tex]
Therefore, the wavelength of a gamma-ray photon with energy [tex]7.7 × 10^-13[/tex]J is approximately[tex]2.6 × 10^-13 m.[/tex]
So, the correct answer is 2.6 Times [tex]10^-13 m.[/tex].
To learn more about Gamma rays here
https://brainly.com/question/22166705
#SPJ4
Plane-polarized light passes through two polarizers whose axes are oriented at 34.0 ∘ to each other. If the intensity of the original beam is reduced to 17.0 % , what was the polarization direction of the original beam, relative to the first polarizer?
The polarization direction of the original beam was 63.4 degrees relative to the first polarizer's axis.
The angle between the two polarizers is 34.0 degrees. If the intensity of the original beam is reduced to 17.0%, then the second polarizer must have reduced the intensity by a factor of 0.17/1.00 = 0.17. This means that the first polarizer must have already reduced the intensity by a factor of sqrt(0.17) = 0.412.
Since the intensity of plane-polarized light passing through a polarizer is proportional to the cosine squared of the angle between the polarization direction and the polarizer's axis, we can use this equation to find the angle between the original beam's polarization direction and the first polarizer's axis. Let theta be this angle, then:
cos^2(theta) = 0.412
theta = 63.4 degrees
Learn More about polarization here :-
https://brainly.com/question/30002497
#SPJ11
A large air conditioner has a resistance of 6.0 Ωand an inductive reactance of 16 Ω . The air conditioner is powered by a 65.0 Hz generator with an rms voltage of 200 V .
A) Find the impedance of the air conditioner. Z=_____Ω
B)Find the rms current. Irms=______A
C)Find the average power consumed by the air conditioner. Pav=______W
A) The impedance of the air conditioner is approximately Z= 17.1 Ω.
B) The rms current is approximately 11.7 A.
C) The average power consumed by the air conditioner is approximately Pav= 820.14 W.
A) To find the impedance (Z) of the air conditioner, we can use the formula Z = √(R² + X_L²), where R is the resistance and X_L is the inductive reactance.
Z = √(6.0 Ω² + 16 Ω²) = √(36 + 256) = √292 ≈ 17.1 Ω
B) To find the rms current (I_rms), we can use the formula I_rms = V_rms / Z, where V_rms is the rms voltage.
I_rms = 200 V / 17.1 Ω ≈ 11.7 A
C) To find the average power (P_av) consumed by the air conditioner, we can use the formula P_av = I_rms² × R.
P_av = (11.7 A)² × 6.0 Ω ≈ 820.14 W
For more such questions on Impedance.
https://brainly.com/question/17137756#
#SPJ11
an ideal spring of negligible mass is 11.00 cm long when nothing is attached to it. when you hang a 3.75 kg object from it, you measure its length to be 12.50 cm.If you wanted to store 10.0J of potential energy in this spring, what would be its total length? Assume that it continues to obey Hooke's law.Express your answer numerically. If there is more than one answer, enter each answer, separated by a comma.
Rearranging the equation and solving for potential energy yields a result of 10 J when multiplied by the spring constant of 2520 N/m and the displacement of 5.11 cm, thus confirming that the overall length of the spring is 16.11 cm.
To solve this problem, Hooke's Law and Conservation of Energy were used. Hooke's Law states that the elongation of a spring is directly proportional to the force applied and inversely proportional to the spring constant.
The spring constant, k, is equal to the force F divided by the elongation x. From the given data, the force is equal to the mass of the object multiplied by the acceleration due to gravity, F = m*g. The elongation of the spring is equal to the difference in length from when nothing is attached to it, x = 12.50 cm - 11.00 cm = 1.50 cm. Thus, the spring constant is equal to:k = F/x = (3.75 kg * 9.8 m/s2)/1.50 cm = 2520 N/m.
The Conservation of Energy states that the potential energy stored in a spring is equal to the work done to stretch it multiplied by the spring constant. Using the given data, the potential energy stored in the spring is equal to 10 J.
The total elongation of the spring, y, is calculated by rearranging the equation and solving for y, which gives y = 10 J/(2520 N/m) = 3.97 cm. The total length of the spring can then be calculated by adding the elongation to the original length, y + 11.00 cm = 14.44 cm. Similarly, the elongation can be found by subtracting the original length from the total length of:16.11 cm: 16.11 cm - 11.00 cm = 5.11 cm.
Rearranging the equation and solving for the potential energy gives 10 J = (2520 N/m) * 5.11 cm, which confirms that the total length of the spring is 16.11 cm.
Learn more about Hooke's Law at: https://brainly.com/question/15703348
#SPJ11
Answer for 50pts
1. Draw a free body diagram for each of the following objects:
a. a projectile accelerating downward in the presence of air resistance
b. a crate being pushed across a flat surface at constant speed
2. A bag of sugar has a mass of 2.0 kg
a. What is its weight in newtons on the moon, where acceleration due to gravity is one-sixth of that on Earth?
b. What is its weight on Jupiter, where acceleration due to gravity is 2.64 times that on Earth?
3. A 3.0 kg block on an incline at a 50.0o angle is held in equilibrium by a horizontal force.
a. Determine the magnitude of this horizontal force (disregard friction)
b. Determine the magnitude of the normal force on the block
4. A 60 kg ice skater is at rest on a flat skating rink. A 200 N horizontal force is needed to set the skater in motion. However, after the skater is in motion, a horizontal force of 180 N keeps the skater moving at a constant velocity. Find the coefficients of static and kinetic friction between the skates and the ice.
Explanation:
1a. Free body diagram of a projectile accelerating downward in the presence of air resistance:
Free body diagram of a projectile accelerating downward in the presence of air resistance
b. Free body diagram of a crate being pushed across a flat surface at constant speed:
Free body diagram of a crate being pushed across a flat surface at constant speed
2a. Weight of the bag of sugar on the moon:
Weight = mass x acceleration due to gravity
On the moon, acceleration due to gravity is one-sixth of that on Earth, so
Weight on the moon = 2.0 kg x (1/6) x 9.81 m/s^2 = 3.27 N
b. Weight of the bag of sugar on Jupiter:
On Jupiter, acceleration due to gravity is 2.64 times that on Earth, so
Weight on Jupiter = 2.0 kg x 2.64 x 9.81 m/s^2 = 51.6 N
3a. To hold the block in equilibrium, the horizontal force must balance the component of the weight force that acts parallel to the incline. The weight force is given by:
Weight = mass x gravity
Weight = 3.0 kg x 9.81 m/s^2 = 29.43 N
The component of the weight force parallel to the incline is given by:
Force_parallel = Weight x sin(50.0o)
Force_parallel = 29.43 N x sin(50.0o)
Force_parallel = 22.58 N
Therefore, the magnitude of the horizontal force required to hold the block in equilibrium is 22.58 N.
b. The normal force on the block is equal in magnitude and opposite in direction to the component of the weight force that acts perpendicular to the incline. This is given by:
Force_perpendicular = Weight x cos(50.0o)
Force_perpendicular = 29.43 N x cos(50.0o)
Force_perpendicular = 22.52 N
Therefore, the magnitude of the normal force on the block is 22.52 N.
A curve of radius 50.2 m is banked so that a car of mass 1.7 Mg traveling with uniform speed 53 km/hr can round the curve without relying on friction to keep it from slipping on the surface. 1.6 Mg µ ≈ 0 θ At what angle is the curve banked? The acceleration due to gravity is 9.8 m/s 2 . Answer in units of deg.
A curve of radius 50.2 m is banked so that a car of mass 1.7 Mg traveling with uniform speed 53 km/hr can round the curve without relying on friction to keep it from slipping on the surface. The angle at which the curve is banked is approximately 21.2 degrees.
To explain, we can use the formula for the angle of banking:
[tex]θ = tan⁻¹(v² / (r * g))[/tex]
Where v is the velocity of the car, r is the radius of the curve, and g is the acceleration due to gravity. Plugging in the values given, we get:
[tex]θ = tan⁻¹((53 km/hr)² / (50.2 m * 9.8 m/s²))[/tex]
Converting the velocity to meters per second and simplifying, we get:
[tex]θ ≈ 21.2[/tex] degrees
Therefore, the angle at which the curve must be banked is approximately 21.2 degrees. This angle allows the horizontal component of the car's mass to balance the necessary centripetal force needed to round the curve without relying on friction.\
learn more about mass here:
https://brainly.com/question/15959704
#SPJ11
The vertical line above represents the reflecting surface of a flat mirror while the dot on the left represents the local of a small bug. Using a straight edge and being concerned for the correct scale: Draw the location of the image of the bug in the mirror. Draw four light rays that come from the bug and that are reflected from the mirror. Show the relation between these light rays and the location of the image of the bug. Also show the relation between the angle of incidence and the angle of reflection in the reflected ray.
Drawing the location of the image of the bug in the mirror and the reflected rays from the bug allows us to visualize how flat mirrors reflect light and form images, and how the angles of incidence and reflection are related.
To draw the location of the image of the bug in the mirror, we first draw a perpendicular line to the reflecting surface of the flat mirror at the location of the bug. This perpendicular line represents the normal to the surface of the mirror.
Then we draw a line from the bug to the mirror, making sure that the angle of incidence is equal to the angle of reflection. This line represents the incident ray. We extend this line behind the mirror, and where it intersects the normal line, we draw a dashed line representing the reflected ray. We repeat this process for a few more rays coming from different points on the bug.
To be more specific, we draw four light rays coming from the bug, such that two of the rays are parallel to each other and pass through the top and bottom of the bug, while the other two rays are also parallel to each other and pass through the left and right sides of the bug.
The image of the bug will be located at the point where these reflected rays intersect. This point will be behind the mirror, as the image is virtual, meaning it appears to be behind the mirror but is not a physical object.
The angle of incidence and the angle of reflection will be equal for each of the reflected rays, and these angles will be measured with respect to the normal to the surface of the mirror at the point of incidence. Therefore, the angle of incidence and the angle of reflection will be equal and opposite for each of the reflected rays.
Overall, drawing the location of the image of the bug in the mirror and the reflected rays from the bug allows us to visualize how flat mirrors reflect light and form images, and how the angles of incidence and reflection are related.
For more such questions image visit:
https://brainly.com/question/23864253
#SPJ11
Choose the statement that correctly describes the solar neutrino problem. a. Detectors were only looking for one kind of neutrino and were not sensitive to other types of neutrinos. b. Detectors were observing faster—than—light neutrinos. c. Detectors were not sensitive enough to observe any types of neutrinos. d. The neutrinos detected were too large based on theoretical predictions.
The statement that correctly describes the solar neutrino problem is: a. Detectors were only looking for one kind of neutrino and were not sensitive to other types of neutrinos.
What is Neutrinos?
Neutrinos are subatomic particles that belong to the family of leptons, which also includes electrons. They have no electric charge, very little mass, and interact only weakly with other matter, making them very difficult to detect. Neutrinos are produced by nuclear reactions in the Sun, as well as in supernovae, cosmic rays, and particle accelerators.
The solar neutrino problem refers to a discrepancy between the number of neutrinos predicted by theoretical models of the Sun's nuclear reactions and the number of neutrinos actually detected by experiments on Earth. The early neutrino detectors were designed to detect electron neutrinos, which are the type of neutrinos produced by the Sun's fusion reactions.
Learn more about Neutrinos from the given link
https://brainly.com/question/29678174
#SPJ1
The energy of a photon is
Pick those that apply
A. h f divided by c
B. h c divided by lambda
C. h f
D. h
The correct answers are B and C for energy of a photon
h f divided by c and B. h c divided by lambda. These equations represent the relationship between the energy of a photon (E), its frequency (f), wavelength (lambda), and the Planck constant (h) and speed of light (c).
Hello! The energy of a photon can be calculated using the following formulas:
C. E = h × f, where E is the energy, h is Planck's constant, and f is the frequency of the photon.
B. E = (h × c) / λ, where E is energy, h is Planck's constant, c is speed of light, and λ (lambda) is the wavelength of the photon.
So, the correct answers are B and C.
Learn more about photon here:
https://brainly.com/question/29254702
#SPJ11
An organ pipe with a fundamental frequency f is open at both ends. If one end is closed off, the fundamental frequency, then will become????
The answer is 0.5 the frequency, Why?
The fundamental frequency will become 0.5 times the original frequency when one end of an open organ pipe is closed off due to the formation of a node at the closed end, resulting in half the wavelength.
When an open organ pipe is closed at one end, the wavelength of the fundamental frequency is halved due to the formation of a node at the closed end, while the length of the pipe remains the same. The frequency of a wave is inversely proportional to its wavelength, so halving the wavelength doubles the frequency. Therefore, the fundamental frequency becomes 0.5 times the original frequency. This phenomenon is used in various musical instruments like clarinets and flutes, where closing holes changes the effective length of the pipe, changing the frequency of the sound produced.
Learn more about organ pipe here:
https://brainly.com/question/24188759
#SPJ11
Take P1 = 8 kip and P2 = 4 kip. Determine the absolute maximum shear stress developed in the beam.
To determine the absolute maximum shear stress in a beam with given loads P1 and P2, we need to consider several factors, such as the beam's cross-sectional area and the distribution of the loads. These are not given In this case, so we cant find exact absolute maximum shear stress developed
First, identify the critical points where the maximum shear stress is likely to occur, which are usually at the supports and points of load application. Next, find the internal shear force (V) at each of these critical points. This can be done using equilibrium equations or shear force diagrams.
Once you have the internal shear force values, the absolute maximum shear stress can be calculated using the following formula: τ_max = VQ/Ib
Where τ_max is the maximum shear stress, V is the internal shear force, Q is the first moment of area about the neutral axis, I is the moment of inertia of the beam's cross-section, and b is the width of the beam's cross-section at the location of interest.
Calculate the maximum shear stress at each critical point and compare the values. The highest value among them will be the absolute maximum shear stress developed in the beam.
Know more about shear stress here:
https://brainly.com/question/14418799
#SPJ11
A point charge has a charge of 2.50×10−11 C .
Part A
At what distance from the point charge is the electric potential 84.0 V ? Take the potential to be zero at an infinite distance from the charge.
d = ___ m
Part B
At what distance from the point charge is the electric potential 25.0 V ? Take the potential to be zero at an infinite distance from the charge.
d = ___ m
Please LOOK HERE, someone already tried and gave me the wrong answers, so please dont repeat the same wrong answer http://www..com/homework-help/questions-and-answers/point-charge-charge-250-10-11-c--part-distance-point-charge-electric-potential-840-v-take--q7787819
Part a) the distance from the point charge where the electric potential is 84.0 V is 6.77 x 10⁻³ m. Part b) the distance from the point charge where the electric potential is 25.0 V is 9.00 x 10⁻³ m.
The electric potential (V) at a certain distance (d) from a point charge (q) can be calculated using the formula:
V = k x q/d
where k is Coulomb's constant (k = 9.0 x 10⁹ N*m₂/C²).
Part A:
We know that the electric potential is 84.0 V and the charge of the point charge is 2.50 x 10^-11 C. We also know that the potential is zero at an infinite distance from the charge. Plugging these values into the formula, we get:
84.0 V = (9.0 x 10⁹ N x m/C²) x (2.50 x 10⁻¹¹ C) / d
Solving for d, we get:
d = (9.0 x 10⁹ Nm₂/C²) x (2.50 x 10⁻¹¹ C) / 84.0 V
d = 6.77 x 10⁻³ m
Therefore, the distance from the point charge where the electric potential is 84.0 V is 6.77 x 10⁻³ m.
Part B:
We know that the electric potential is 25.0 V and the charge of the point charge is 2.50 x 10⁻¹¹ C. We also know that the potential is zero at an infinite distance from the charge. Plugging these values into the formula, we get:
25.0 V = (9.0 x 10⁹ Nm²/C²) x (2.50 x 10⁻¹¹ C) / d
Solving for d, we get:
d = (9.0 x 10⁹ Nm²/C²) x (2.50 x 10⁻¹¹ C) / 25.0 V
d = 9.00 x 10⁻³ m
Learn more about electric potential here
https://brainly.com/question/12645463
#SPJ11
A person is pulling a heavy box on a set of frictionless rollers by a sturdy rope across a horizontal floor. The rope makes an angle of 40° above the horizontal. The box is 115 kg & moves at constant acceleration along the floor. A scale between the rollers & the box measures the normal force to be 685 N. What is the magnitude of the tension in the rope?
The magnitude of the tension in the rope is 1,029 N.
How to find the magnitude of the tension in the rope?To calculate the magnitude of tension in the rope, we use the following formula:
The normal force acting on the box is equal to the weight of the box, which is given by:
N = mg
where N is the normal force, m is the mass of the box, and g is the acceleration due to gravity (9.8 m/s²). Substituting the given values, we get:
685 N = (115 kg) x (9.8 m/s²)
Solving for the mass, we get:
m = 115 kg
To find the tension in the rope, we need to resolve the forces acting on the box in the horizontal and vertical directions. In the vertical direction, the weight of the box is balanced by the normal force, so there is no net force. In the horizontal direction, the tension in the rope is the only force acting on the box, and it causes the box to accelerate. The horizontal component of the tension can be found by:
T cos 40° = ma
where T is the tension in the rope, a is the acceleration of the box, and the angle 40° is the angle between the rope and the horizontal. The vertical component of the tension can be found by:
T sin 40° = N
where N is the normal force acting on the box.
Substituting the given values, we get:
T cos 40° = (115 kg) x a
T sin 40° = 685 N
Dividing the two equations, we get:
tan 40° = a/g
Solving for the acceleration, we get:
a = (tan 40°) x g = 6.23 m/s²
Substituting this value into the first equation, we get:
T cos 40° = (115 kg) x (6.23 m/s²)
Solving for the tension, we get:
T = [(115 kg) x (6.23 m/s²)] / cos 40°
T = 1,029 N
Learn more about Tension
brainly.com/question/15880959
#SPJ11
For an object undergoing a uniform circular motion with radius 8.723 m and period 3.034 sec, the centripetal acceleration (m/s2) is:
The centripetal acceleration of the object is 33.536 m/s².
For the linear velocity of the object, we can use the formula:
v = 2πr/T
Substituting the given values, we get:
v = 2π(8.723 m)/(3.034 sec) = 17.122 m/s
Now, substituting the values of v and r in the formula for centripetal acceleration, we get:
a = v²/r = (17.122 m/s)²/ (8.723 m) = 33.536 m/s²
Centripetal acceleration is a type of acceleration that occurs when an object moves in a circular path. It is the acceleration that is directed toward the center of the circular path and is responsible for keeping the object moving in a circular motion.
The magnitude of the centripetal acceleration can be calculated using the formula a = v²/r, where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circular path. The direction of the centripetal acceleration is always towards the center of the circular path, perpendicular to the velocity of the object. This acceleration is caused by the net force acting on the object, which is directed toward the center of the circle.
To learn more about Centripetal acceleration visit here:
brainly.com/question/14465119
#SPJ4
The equilibrium configuration at which the torque vanishes is θ=π/2. Deviations from equilibrium may be parameterized as θ=π/2−ϵ. Using power series expansions
The equilibrium configuration at which the torque vanishes is θ=π/2, and deviations from equilibrium can be parameterized as θ=π/2−ϵ using power series expansions.
What is meant by the term "equilibrium configuration"?The term "equilibrium configuration" refers to the state of a physical system in which the net force and net torque acting on the system are both zero, and the system is not undergoing any acceleration or rotation.
What is a power series expansion?A power series expansion is a mathematical technique used to express a function as an infinite sum of terms, where each term is a power of a variable multiplied by a coefficient. Power series expansions are often used in calculus and mathematical analysis to approximate functions and solve differential equations.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ1
What happens to light when it hits a translucent object?
Answer:
it reflects most of the light that falls on them
Explanation:
good luck
Determine the aerosol number and mass concentration for which the particles and the air in a unit volume of aerosol scatter equal amounts of light. Assume that the particle diameter is 0.5 mu m, m = 1.5, and rho_p = 1000 kg/m^3 [1.0g/cm^3].
The aerosol number and mass concentration for which particles and air scatter equal amounts of light depends on the particle diameter, refractive index, and density.
For particles with a diameter of 0.5 µm, a refractive index of 1.5, and a density of 1000 kg/m³, the aerosol number concentration should be approximately 2.5 × 10⁹ particles/cm³ and the mass concentration should be approximately 1.2 µg/m³.
At this concentration, the amount of light scattered by the particles and air in a unit volume of aerosol should be equal. This information is important for understanding the optical properties of aerosols, which affect climate, air quality, and visibility.
To know more about refractive index click on below link:
https://brainly.com/question/30761100#
#SPJ11
a spring has a relaxed length of 5 cm and a stiffness of 150 n/m. how much work must you do to change its length from 7 cm to 12 cm? n·m
The amount of work you must do to change the length of the spring from 7 cm to 12 cm is 0.3375 N·m.
To find the work required to change the spring's length from 7 cm to 12 cm, we'll use the formula for work done on a spring, which is W = (1/2)k(x₂² - x₁²), where W is the work, k is the stiffness or spring constant, x₂ is the final length, and x₁ is the initial length.
In this case, the stiffness (k) is 150 N/m, the initial length (x₁) is 7 cm - 5 cm = 2 cm (0.02 m), and the final length (x₂) is 12 cm - 5 cm = 7 cm (0.07 m).
Plug these values into the formula: W = (1/2)(150)(0.07² - 0.02²) = (1/2)(150)(0.0049 - 0.0004) = 75(0.0045) = 0.3375 N·m
So, you must do 0.3375 N·m of work to change the spring's length from 7 cm to 12 cm.
Learn more about spring here: https://brainly.com/question/27956135
#SPJ11
in your summer job with a venture capital firm, you are given funding requests from four inventors of heat engines. the inventors claim the following data for their operating prototypes:PrototypeA B C DTc (oC) low-temperature reservoir 47 17 -33 37TH (oC) high-temperature reservoir 192 227 267 147claimed efficiency e (%) 22 37 58 20a. based on the Tc anfd TH values for prototype A, find its maximum possible efficiencyb. based on the Tc and TH values for the prototype B, find its maximum posibble efficiencyc. based on the Tc and TH values prtotype C, find its maximum posibble afficiency
The maximum possible efficiency for prototype A is 75.52%, the maximum possible efficiency for prototype B is 92.58% and the maximum possible efficiency for the prototype is 87.64%.
To find the maximum possible efficiency of each heat engine prototype, we can use the Carnot efficiency formula, which is given by:
η = 1 - (Tc / TH)
Where η is the efficiency, Tc is the temperature of the low-temperature reservoir, and TH is the temperature of the high-temperature reservoir.
a. For Prototype A:
Tc = 47°C
TH = 192°C
Using the Carnot efficiency formula:
η = 1 - (Tc / TH)
η = 1 - (47 / 192)
η ≈ 0.7552
The maximum possible efficiency for Prototype A is approximately 75.52%.
b. For Prototype B:
Tc = 17°C
TH = 227°C
Using the Carnot efficiency formula:
η = 1 - (Tc / TH)
η = 1 - (17 / 227)
η ≈ 0.9258
The maximum possible efficiency for Prototype B is approximately 92.58%.
c. For Prototype C:
Tc = -33°C
TH = 267°C
Using the Carnot efficiency formula:
η = 1 - (Tc / TH)
η = 1 - (-33 / 267)
η ≈ 0.8764
The maximum possible efficiency for Prototype C is approximately 87.64%.
Please note that these calculations assume ideal conditions and do not take into account any practical limitations or inefficiencies that may exist in the prototypes.
The maximum possible efficiency for Prototype A is approximately 75.52%. The maximum possible efficiency for Prototype B is approximately 92.58%.The maximum possible efficiency for Prototype C is approximately 87.64%.
To practice more questions about the Carnot engine:
https://brainly.com/question/17200911
#SPJ12
a sample of helium gas has a volume of 546 ml at a pressure of 1.60 atm and a temperature of 137 ∘c. what is the pressure of the gas in atm when the volume is 657 ml and the temperature is 158 ∘c
1.35 atm is the pressure of the gas in atm when the volume is 657 ml and the temperature is 158 °C.
We can use the combined gas law formula, which is:
([tex]P_1[/tex]×[tex]V_1[/tex]) / [tex]T_1[/tex] = ([tex]P_2[/tex]× [tex]V_2[/tex]) / [tex]T_2[/tex]
Where [tex]P_1[/tex] and[tex]P_2[/tex] are initial and final pressures,[tex]V_1[/tex] and [tex]V_2[/tex] are initial and final volumes, and [tex]T_1[/tex] and [tex]T_2[/tex] are initial and final temperatures.
First, convert temperatures to Kelvin:
[tex]T_1[/tex] = 137 + 273.15 = 410.15 K
[tex]T_2[/tex] = 158 + 273.15 = 431.15 K
Now, we can plug in the given values and solve for the final pressure [tex]P_2[/tex]:
(1.60 atm ×546 mL) / 410.15 K = ([tex]P_2[/tex]× 657 mL) / 431.15 K
To solve for [tex]P_2[/tex], we can rearrange the equation:
[tex]P_2[/tex] = (1.60 atm × 546 mL ×431.15 K) / (410.15 K× 657 mL)
Now, we can calculate [tex]P_2[/tex]:
[tex]P_2[/tex] = (1.60 × 546 × 431.15) / (410.15× 657) ≈ 1.35 atm
So, the pressure of the helium gas sample when the volume is 657 mL and the temperature is 158 °C is approximately 1.35 atm.
To know more about Pressure refer here :
https://brainly.com/question/28012687
#SPJ11
1.35 atm is the pressure of the gas in atm when the volume is 657 ml and the temperature is 158 °C.
We can use the combined gas law formula, which is:
([tex]P_1[/tex]×[tex]V_1[/tex]) / [tex]T_1[/tex] = ([tex]P_2[/tex]× [tex]V_2[/tex]) / [tex]T_2[/tex]
Where [tex]P_1[/tex] and[tex]P_2[/tex] are initial and final pressures,[tex]V_1[/tex] and [tex]V_2[/tex] are initial and final volumes, and [tex]T_1[/tex] and [tex]T_2[/tex] are initial and final temperatures.
First, convert temperatures to Kelvin:
[tex]T_1[/tex] = 137 + 273.15 = 410.15 K
[tex]T_2[/tex] = 158 + 273.15 = 431.15 K
Now, we can plug in the given values and solve for the final pressure [tex]P_2[/tex]:
(1.60 atm ×546 mL) / 410.15 K = ([tex]P_2[/tex]× 657 mL) / 431.15 K
To solve for [tex]P_2[/tex], we can rearrange the equation:
[tex]P_2[/tex] = (1.60 atm × 546 mL ×431.15 K) / (410.15 K× 657 mL)
Now, we can calculate [tex]P_2[/tex]:
[tex]P_2[/tex] = (1.60 × 546 × 431.15) / (410.15× 657) ≈ 1.35 atm
So, the pressure of the helium gas sample when the volume is 657 mL and the temperature is 158 °C is approximately 1.35 atm.
To know more about Pressure refer here :
https://brainly.com/question/28012687
#SPJ11
Suppose that 750 g of water vapor condense to make a cloud about the size of an average room. If we assume that the latent heat of condensation is 600 cal/g, how much heat would be released to the air? If the total mass of air before condensation is 100 kg, how much warmer would the air be after condensation? Assume that the air is not undergoing any pressure changes. (Hint: Use the specific heat of air in Table, p. 34.)Table 2.1 Specific Heat of Various SubstancesSUBSTANCESPECIFIC HEAT(Cal/g × °C) J/(kg × °C)Water (pure)14186Wet mud0.62512Ice (0°C)0.52093Sandy clay0.331381Dry air (sea level)0.241005Quartz sand0.19795Granite0.19794
After the condensation of water vapor, the air would be approximately 18.75°C warmer , at the given latent heat and total mass of air before condensation.
Suppose that 750 g of water vapor condense to make a cloud about the size of an average room, and the latent heat of condensation is 600 cal/g.
To calculate the heat released to the air, we need to multiply the mass of water vapor by the latent heat of condensation.
Step 1: Calculate the heat released.
Heat released = mass of water vapor × latent heat of condensation
Heat released = 750 g × 600 cal/g
Heat released = 450,000 cal
Now, let's find out how much warmer the air would be after condensation. The total mass of air before condensation is 100 kg, and the specific heat of dry air at sea level is 0.24 cal/g°C.
Step 2: Convert mass of air from kg to grams.
mass of air = 100 kg × 1000 g/kg
mass of air = 100,000 g
Step 3: Calculate the increase in temperature.
We know that heat = mass × specific heat × change in temperature. Rearranging this equation, we get:
Change in temperature = heat / (mass × specific heat)
Change in temperature = 450,000 cal / (100,000 g × 0.24 cal/g°C)
Change in temperature ≈ 18.75°C
So, after the condensation of water vapor, the air would be approximately 18.75°C warmer.
For more information on condensation, latent heat and mass refer to https://brainly.com/question/2527210
#SPJ11