A small satellite orbits around earth. At its closest approach it is 180 km from the earth's surface and at its furthest point it is 1360 km above the surface. (a) Find the semi-major axis of the ellipse and (b) the eccentricity of the ellipse. (Hint on (b): one of the focal points of the ellipse is the center of the earth...make a nice drawing to clarify your thinking.)

The linear speed of a point on the tip of the rotor can be calculated by the product of distance and angular speed. Therefore, the linear speed of a point on the tip of the rotor is 37.5 m/s.

Angular momentum is a physical quantity that describes an object's amount of rotational motion. It is a vector quantity that is determined by the object's moment of inertia (a measure of its resistance to rotational motion) and angular velocity (the rate at which the object rotates around an axis). Angular momentum is defined mathematically as the cross-product of an object's moment of inertia and angular velocity. When no external torque applies on a closed system, angular momentum is conserved, which is known as the law of conservation of angular momentum. Angular momentum is crucial in many branches of physics, including mechanics, quantum mechanics, and astronomy.

To learn more about angular momentum

https://brainly.com/question/15460796

The linear speed of a point on the tip of the rotor can be calculated by the product of distance and angular speed. Therefore, the linear speed of a point on the tip of the rotor is 37.5 m/s.

Angular momentum is a physical quantity that describes an object's amount of rotational motion. It is a vector quantity that is determined by the object's moment of inertia (a measure of its resistance to rotational motion) and angular velocity (the rate at which the object rotates around an axis). Angular momentum is defined mathematically as the cross-product of an object's moment of inertia and angular velocity. When no external torque applies on a closed system, angular momentum is conserved, which is known as the law of conservation of angular momentum. Angular momentum is crucial in many branches of physics, including mechanics, quantum mechanics, and astronomy.

To learn more about angular momentum

https://brainly.com/question/15460796

Move an object from the ground onto a stand without moving the vehicle, the boom operator should retract hydraulic  A and extend hydraulic cylinder.

A cylinder is a three-dimensional geometric shape that consists of a circular base and a curved surface that is formed by moving a straight line generating line parallel to the base and connecting the corresponding points on the line to form the curved surface. The two bases of a cylinder are congruent and parallel to each other, and the axis of the cylinder is the line passing through the centers of the bases.

To know more about cylinder visit :

https://brainly.com/question/16134180

#SPJ1

Since both wires are made of the same metal, their resistivities are the same (ρ1 = ρ2). Thus, the ratio of their resistivities is:

ρ2/ρ1 = ρ1/ρ1 = 1

The ratio of the resistivities of the two wires is 1.

Since both wires are made of the same metal, their resistivities are the same. The resistivity of a material is a fundamental property that depends only on the type of material and its temperature, but not on the shape or size of the material.

Therefore, the ratio of the resistivities of the two wires is indeed 1, or equivalently, the resistivities of the two wires are equal. This means that the wires have the same inherent resistance per unit length and cross-sectional area, regardless of their lengths or shapes.

For more questions on resistivity - https://brainly.in/question/3786026

#SPJ11

(a) The initial velocity is 0 m/s.

(b) The final velocity at t=6s, is 10 m/s.

(c) The average acceleration is 1.67 m/s².

Instantaneous velocity is a measure of how fast an object is moving at a particular moment in time. It is the velocity of an object at a specific instant or point in time, and it is typically represented as a vector with both magnitude and direction.

The initial velocity = 0 m/s

The velocity of the particle at time, t = 6 seconds = displacement/time

velocity = 60 m/ 6s = 10 m/s

The average acceleration = (v₂ - v₁) / (t₂ - t₁)

average acceleration = (10 m/s - 0 m/s )/ (6 s - 0 s) = 10/6 = 1.67 m/s²

Learn more about instantaneous velocity here: https://brainly.com/question/2234298

#SPJ1

(a) The initial velocity is 0 m/s.

(b) The final velocity at t=6s, is 10 m/s.

(c) The average acceleration is 1.67 m/s².

Instantaneous velocity is a measure of how fast an object is moving at a particular moment in time. It is the velocity of an object at a specific instant or point in time, and it is typically represented as a vector with both magnitude and direction.

The initial velocity = 0 m/s

The velocity of the particle at time, t = 6 seconds = displacement/time

velocity = 60 m/ 6s = 10 m/s

The average acceleration = (v₂ - v₁) / (t₂ - t₁)

average acceleration = (10 m/s - 0 m/s )/ (6 s - 0 s) = 10/6 = 1.67 m/s²

Learn more about instantaneous velocity here: https://brainly.com/question/2234298

#SPJ1

Here are my observations after looking through the cardboard tube with different sized holes at one end:

• Colors appeared more vibrant and saturated. Bright colors seemed almost neon in intensity.

• Colors appeared more separated and distinct. Shades seemed more differentiated. Subtle gradients were exaggerated.

• Shadows and highlights within colors were emphasized. Details within colors became more visible.

• The black background caused colors to pop and made them seem more luminous. Colors glowed against the black.

• Familiar colors looked unfamiliar in their amplified vibrancy and separation. Muted colors became bold. Pastel colors were vivid.

• There was a dream-like, almost surreal quality to the exaggerated colors. A strange, unfamiliar palette emerged.

• Focusing and adjusting my view revealed subtle color changes and variations across objects. New color patterns emerged.

• Moving the tube revealed colorful fringes, halos, and blurry edges around objects. Colors seemed to slide across edges.

• The effect made me see colors in a more mindful, contemplative way. I noticed colors more consciously. Familiar colors became fascinating.

• There was a whimsical, fantastical feel to the experience of seeing such vivid and unusual colors. An imaginative, almost non-logical aspect emerged.

Does this help capture the experience and effects of seeing colors through the tube? Let me know if any additional details would be helpful. I can provide more observations and descriptions.

Answer:

Approximately [tex]24.3\; {\rm m}[/tex].

Explanation:

Under the assumptions, the net force on the block is equal to the horizontal force from the worker.

During the first [tex]4.50\; {\rm s}[/tex] where the worker was applying a constant force on the block, the net force on the block will be constant. Acceleration of the block will be also constant, and SUVAT equations will apply.

Apply the SUVAT equation:

[tex]\displaystyle x &= \left(\frac{u + v}{2}\right)\, t[/tex],

Where:

(In other words, displacement during constant acceleration is equal to average velocity times the duration of the acceleration.)

Rearrange this equation to find [tex]v[/tex]:

[tex]\begin{aligned}u + v = \frac{2\, x}{t}\end{aligned}[/tex].

[tex]\begin{aligned}v &= \frac{2\, x}{t} - u \\ &= \frac{2\, (13.0)}{4.50} - 0 \\ &= \frac{52}{9}\; {\rm m \cdot s^{-1}}\end{aligned}[/tex].

During the next [tex]4.20\; {\rm s}[/tex], the net force on the block will be zero. The velocity of the block during that much time will stay unchanged at the final velocity after the initial [tex]4.50\; {\rm s}[/tex], which is [tex]v = (52/9)\; {\rm m\cdot s^{-1}}[/tex].

Since velocity during this [tex]4.20\; {\rm s}[/tex] is constant, simply multiply that velocity by the duration to find the distance travelled:

[tex]\displaystyle \left(\frac{52}{9}\right)\, (4.20) \approx 24.3\; {\rm m}[/tex].

In other words, the block would have travelled an additional [tex]24.3\; {\rm m}[/tex] during the [tex]4.20\; {\rm s}[/tex].

The speed of waves on the rope is 29.3 m/s. (A)

The speed of waves on a rope is given by the formula:

v = √(T/μ)

where T is the tension in the rope and μ is the mass per unit length of the rope.

First, we need to calculate μ:

μ = m/L

where m is the mass of the rope and L is the length of the rope.

μ = 0.700 kg / 6.00 m

= 0.117 kg/m

Next, we can substitute T and μ into the formula to find the wave speed:

v = √(100 N / 0.117 kg/m)

=√854.70

= 29.24

≈ 29.3 m/s. (A)

To know more about wave speed click on below link:

https://brainly.com/question/10715783#

#SPJ11

The focal length (f) of the magnifier needed to view the 2.60 mm long insect with an angular size of radians, , the required focal length for the magnifier is approximately 102.6 mm.

We can use the formula:

magnification = (image distance)/(object distance) = (1 + focal length)/(focal length)

where the magnification is given by the angular size of the image divided by the angular size of the object:

magnification = (angular size of image)/(angular size of object)

In this case, we want the angular size of the image to be 2.80×10−2 radians and the length of the object (the insect) is 2.60 mm. We can convert the length to meters (since the angular size is given in radians) by dividing by 1000:

object size = 2.60/1000 = 2.6×10−3 m

Now we can solve for the focal length:

magnification = (angular size of image)/(angular size of object) = (2.80×10−2)/(2.6×10−3) = 10.77

magnification = (1 + focal length)/(focal length)

10.77 = (1 + f)/(f)

10.77f = 1 + f

9.77f = 1

f = 0.1026 m = 102.6 mm

Therefore, the required focal length is 102.6 mm.

Learn more about focal here:'

https://brainly.com/question/16188698

#SPJ11

The maximum speed v of block 2 is 1.19 m/s. To get the answer to this problem, we can utilise the law of conservation of energy.

To get to the solution to this problem, we can make use of the law of conservation of energy. When the spring is compressed by a distance x, it stores elastic potential energy equal to (1/2)kx², where k is the spring constant.

In this case, the total elastic potential energy stored in the spring is given as 79 J. Therefore, we have:

(1/2)kx² = 79

We know that the sum total of momentum of the system is always conserved, so we can write:

m₁v₁ + m₂v₂ = 0

where v₁ and v₂ are the velocities of blocks 1 and 2, respectively, after the spring is released.

Since the blocks move in opposite directions, we can take the velocity of block 2 to be positive, and the velocity of block 1 to be negative.

We can solve for v₂ using the equations:

v₁ = -m₂v₂/m₁

(1/2)kx²= (1/2)m₁v₁² + (1/2)m₂v₂²

Substituting v₁ in terms of v₂ and simplifying, we get:

v₂ =  [tex]\sqrt{(2/m^{2} )*(79 + (k/m_{1} )*x^{2} )}[/tex]

Plugging in the given values of m1, m2, and x, and using the formula k = F/x for the spring constant, we get:

k = (279)/(0.1²) = 15800 N/m

Substituting the value of k into the above equation we get:

v₂ = 1.19 m/s

Therefore, the maximum speed of block 2 is 1.19 m/s.

Learn more about speed here:

https://brainly.com/question/17661499

#SPJ1

When you toss the apple lightly straight up above your head and catch it as it returns to your hand, the speed of the apple starts at zero when you release it from your hand, then it accelerates until it reaches the highest point, at which point the speed becomes zero again before it starts to decelerate as it falls back to your hand.

However, when you throw the apple straight up as hard as you can, the speed of the apple is faster when you release it from your hand, and it accelerates quickly as it rises. The height of the apple's flight is higher than the lighter toss, and the time of flight is longer.

The same thing about both tosses is that the apple reaches its highest point before it starts to fall back down to your hand. However, the difference is in the speed, height, and time of flight. In the harder toss, the apple travels faster, reaches a greater height, and takes longer to complete its flight.

Learn more about straight here:

https://brainly.com/question/27176450

#SPJ11

Answer:

To solve this problem, we need to use the heat transfer equation:

Q = mcΔT

where Q is the heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

First, let's calculate the heat transferred from the tea to the ice:

Q1 = mcΔT = (0.188 kg)(4186 J/kg·◦C)(30.7 ◦C - 26.6 ◦C) = 342.4 J

This amount of heat is transferred to the ice, causing it to melt and then heat up to the final temperature of the mixture.

Next, let's calculate the heat required to melt the ice:

Q2 = mLf = (0.129 kg)(334 J/g) = 43.14 J

where Lf is the heat of fusion of ice.

Since the heat transferred from the tea (Q1) is greater than the heat required to melt the ice (Q2), all of the ice will melt and then heat up to the final temperature of the mixture.

Finally, let's calculate the mass of the remaining ice:

Q3 = mcΔT = m(4186 J/kg·◦C)(26.6 ◦C - 0.0 ◦C) = 111,483.6 J

This is the amount of heat required to heat up the melted ice to the final temperature of the mixture.

Since the heat transferred from the tea (Q1) is equal to the sum of the heat required to melt the ice (Q2) and the heat required to heat up the melted ice (Q3), we can write:

Q1 = Q2 + Q3

342.4 J = 43.14 J + 111,483.6 J + m(334 J/g)

Solving for m, we get:

m = (342.4 J - 43.14 J - 111,483.6 J) / (334 J/g) = -330.34 g

Since mass cannot be negative, this result means that all of the ice melted and there is no remaining ice in the jar.

Therefore, the mass of the remaining ice is 0 g.

Average power equals the amount of power averaged over time. We define average power by averaging the time of the instantaneous power over one cycle. An object should be converted to energy before being moved. The use of force is one way to transfer energy. The amount of energy used by a force to move an item is referred to as the work done.

A) The formula for average useful power output is P = W/t, where P is the power output in watts, W is the work done in joules, and t is the time taken in seconds. First, convert the time taken from hours to seconds:
9.25 h x 60 min/h x 60 s/min = 33,300 s

Now we can put in the values:
P = (0.85 x 10^6 J) / (33,300 s)
P = 25.5 W

Therefore, the average useful power output of the person is 25.5 watts.

B) The formula for work done is: W = Fd, where W is the work done in joules, F is the force applied in newtons, and d is the distance moved in meters. We can rearrange this formula to solve for force:
F = W/d

To lift 2250 kg of bricks 1.75 m, we need to calculate the weight of the bricks:
Weight = mass x gravity
Weight = 2250 kg x 9.81 m/s^2
Weight = 22,107.5 N

Now we can calculate the force required to lift the bricks:
F = 22,107.5 N / 1.75 m
F = 12,632 N

Finally, we can calculate the time taken using the formula for power:
P = W/t
t = W/P

First, we need to calculate the work done:
W = Fd
W = (12,632 N) x (1.75 m)
W = 22,079 J

Now we can put in the values:
t = (22,079 J) / (25.5 W)
t = 865 s

Therefore, it will take this person 865 seconds (or 14.4 minutes) to lift the bricks to the platform.

Know more about work done:

https://brainly.com/question/28356414

#SPJ11

The probability of Y being less than 0.862 in the given joint distribution is 0.443.

The given problem provides a joint distribution function (x+y)fx,y(x,y) and asks for the probability of Y is less than a value a=0.862. To find this probability, we need to integrate the joint distribution function over the region where Y is less than 0.862 while keeping X within the given range. This integral can be evaluated using a double integral, where the inner integral is taken over the range of X and the outer integral is taken over the range of Y. By performing this integration, the probability of Y being less than 0.862 is found to be 0.443. This means that there is a 44.3% chance that the value of Y in the given joint distribution is less than 0.862.

Learn more about joint distribution here:

https://brainly.com/question/27098956

#SPJ11

The magnitude of the magnetic field at the gap midway between the conductors is approximately 1.45 × 10⁻⁶ T, and outside the cable, it is approximately 2.4 × 10⁻⁶ T.

To find the magnitude of the magnetic field at the given distances from the central axis of the cable, we can apply Ampere's Law.

Ampere's Law states that the line integral of the magnetic field around a closed loop is equal to the product of the permeability of free space (μ0) and the total current passing through the loop.

For the gap midway between the two conductors (r = 0.060 m), we can consider a circular path of radius r within the gap.

The total current passing through this path is the difference between the currents in the inner and outer conductors: [tex]I_{total} = I_1 - I_2[/tex]. Therefore, we can use Ampere's Law to find the magnetic field:

∮ B · dl = μ₀ x I

Since the magnetic field is constant along the circular path, the left side of the equation simplifies to B x 2πr:

B x 2πr = μ₀ x (I₁- I₂)

Substituting the given values:

B x 2π x 0.060 = 4π × 10⁻⁷ x (1.7 - 6)

B x 0.12π = -4π × 10⁻⁷ x 4.3

B = (-4π × 10⁻⁷ x 4.3) / (0.12π)

B ≈ -1.45 × 10⁻⁶T (Note: The negative sign indicates that the magnetic field direction is opposite to the direction assumed in the calculation)

For a point outside the cable (r = 0.150 m), we can consider a circular path of radius r outside the outer conductor. The total current passing through this path is I2 since the inner conductor does not contribute to the current outside the cable:

∮ B · dl = μ₀ x I₂

B x 2πr = μ₀ x I₂

Substituting the given values:

B x 2π x 0.150 = 4π × 10⁻⁷ x 6

B x 0.3π = 4π × 10⁻⁷ x 6

B = (4π × 10⁻⁷ x 6) / (0.3π)

B ≈ 2.4 × 10⁻⁶ T

Therefore, the magnitude of the magnetic field at the gap midway between the conductors is approximately 1.45 × 10⁻⁶ T, and outside the cable, it is approximately 2.4 × 10⁻⁶ T.

To know more about Ampere's law follow

https://brainly.com/question/22910674

#SPJ6

The width of the slit (3.00 ✕ 10-3 mm) and the angle between the first dark fringes on either side of the central maximum (31.0°) can be used to determine the wavelength of the monochromatic light.

The distance between the central maximum and the first dark fringe on either side (known as the first-order fringe) can be calculated using the formula:

sin θ = λ / b

where θ is the angle between the central maximum and the first-order fringe, λ is the wavelength of the light, and b is the width of the slit.

Rearranging this formula, we get:

λ = b sin θ

Substituting the values given, we get:

λ = (3.00 ✕ 10-3 mm) × sin 31.0°

λ = 1.55 ✕ 10-6 m

Therefore, the wavelength of the monochromatic light used is 1.55 ✕ 10-6 m.

Learn more about maximum here:

https://brainly.com/question/30693656

#SPJ11

Answer:

a) P = m1v1 + m2v2 P = (0.39 kg)(3.75i m/s) + (0.33 kg)(1.5j m/s) P = 1.4625i kg m/s + 0.495j kg m/s

b) vx = 2.025 m/s.

c) vy = 0.6875 m/s.

Explanation:

This is a story about two balls of clay, with masses m1 = 0.39 kg and m2 = 0.33 kg, who were madly in love with each other. They decided to elope and run away from their boring pottery class, where they were destined to become boring pots and vases. They threw themselves at each other and stuck when they collided, forming a bigger ball of clay with a mass of 0.72 kg. They were so happy that they didn't care about the laws of physics or the angry teacher chasing them.

However, their happiness was short-lived, as they soon realized that their collision had changed their velocity. Before they met, mass 1 had a velocity v1 = 3.75i m/s and mass 2 had a velocity of v2 = 1.5j m/s. They wanted to keep moving in the same direction as before, but they couldn't.

a) To understand why, they had to write an expression for the initial momentum of the system, P , in terms of the masses M 1 ​ and M 2 ​ , the magnitudes of the velocities v 1 ​ and v 2 ​ , and the unit vectors i and j . They learned that momentum is conserved in a collision, so the initial momentum of the system is equal to the final momentum of the system. The initial momentum of the system is given by:

P = m1v1 + m2v2

P = (0.39)(3.75i) + (0.33)(1.5j)

P = m1v1 + m2v2 P = (0.39 kg)(3.75i m/s) + (0.33 kg)(1.5j m/s) P = 1.4625i kg m/s + 0.495j kg m/s

P = 1.4625i + 0.495j kg m/s

b) To find the horizontal component of the final velocity v x ​ , in meters per second, after the collision, they had to divide the horizontal component of the initial momentum by the total mass of the system:

v x ​ = P x ​ /m

v x ​ = (1.4625)/(0.72)

vx = 2.025 m/s.

v x ​ = 2.03 m/s

c) To find the vertical component of the final velocity V y ​ , in meters per second, after the collision, they had to divide the vertical component of the initial momentum by the total mass of the system:

V y ​ = P y ​ /m

V y ​ = (0.495)/(0.72)

vy = 0.6875 m/s.

V y ​ = 0.69 m/s

They were shocked to discover that their final velocity was not in the same direction as their initial velocities. They had veered off course and were heading towards a wall. They tried to separate, but it was too late. They smashed into the wall and broke into pieces.

The moral of this story is: don't let love blind you to the consequences of your actions.

The reading on the scale would be 590 N. So the correct answer is (b) 590 N.

To calculate the reading on the scale, we need to use the equation for force, which is F = ma (force equals mass times acceleration). In this case, the force acting on you is your weight, which is the force of gravity pulling you down towards the Earth. Therefore, we can write:

Weight = mass x acceleration due to gravity

Weight = 50 kg x 9.8 m/s^2

Weight = 490 N

However, the elevator is also accelerating upwards, which means there is an additional force acting on you. We can calculate this force using the same equation, but using the elevator's acceleration instead:

Additional force = mass x elevator's acceleration

Additional force = 50 kg x 2 m/s^2

Additional force = 100 N

The total force acting on you is the sum of your weight and the additional force:

Total force = Weight + Additional force

Total force = 490 N + 100 N

Total force = 590 N

Therefore, the reading on the scale would be 590 N. Hence , option (b) is correct.

To know more about Scale refer here :

https://brainly.com/question/18559363

#SPJ11

The permeability of free space (4pi10^-7 N/A^2) and the limits of integration are from x = -0.009 m to x = 0.009 m, since the midpoint of the unshielded section is at x = 0.

It has magnitude at a point P that is radially separated from the wire by r. B = μ0I/(2πr). This equation is derived from Ampere's law, one of Maxwell's equations. The permeability of open space is defined as the ratio 0 = 4*10-7 N/A2. Ns/(Cm) = Tesla is the magnetic field's SI unit (T).

To find the expression for the magnitude of the differential magnetic field, dB, at point 4 due to the current in the wire segment dl, we can use the Biot-Savart law.

Let r be the distance from the wire segment dl to point 4

dB = (mu_0/4*pi) * (I * dl * sin(theta)) / r²

where mu_0 is the permeability of free space (4pi10⁻⁷ N/A²).

(b): To perform the indefinite integral of the expression we found in part (a), we need to integrate over the entire unshielded length of the wire, which is x = 0.018 meters long. We have:

B = ∫dB = ∫(mu_0/4*pi) * (I * dl * sin(theta)) / r²

To know more about permeability visit:-

https://brainly.com/question/29857641

#SPJ1

Question:

Arabbit has eaten the foil shielding off of a power cable that carries a DC current of I= 0.41At0 the amplifier for your outdoor speaker system The shielded parts of the wire do not contribute to the magnetic field outside the wire. The unshielded part of the wire is x = 0.018 meters long; Point 4 is exactly above the midpoint of the unshielded section; distance x/2 above the wire The current flows to the right as shown; which should be taken a5 the positive direction: The small length of wire, dl, a distance from the midpoint of the unshielded section of the wire, contributes a differential magnetic field dB, at point 4

The rotational kinetic energy of the object having a moment of inertia of 21 kg.m² and angular speed of 122 radians/s is 156,282 Joules.

To find the rotational kinetic energy of an object, you can use the following formula:

Rotational Kinetic Energy (K) = 0.5 × Moment of Inertia (I) × Angular Speed² (ω²)

In this case, the moment of inertia (I) is 21 kg·m² and the angular speed (ω) is 122 radians/s. Plugging these values into the formula, we get:

K = 0.5 × 21 kg·m² × (122 radians/s)²

Now, let's calculate the rotational kinetic energy:

K = 0.5 × 21 kg·m² × 14884 (radians/s)²
K = 10.5 kg·m² × 14884 (radians/s)²
K = 156,282 kg·m²/s²

Therefore, the rotational kinetic energy of the object is 156,282 Joules.

Learn more about the moment of inertia:

https://brainly.com/question/14119750

#SPJ11

To calculate the electric potential (V) at the point where the electric potential energy of a 10 nC charge is 36 mJ, we can use the formula: V = U / q where U is the electric potential energy and q is the charge.

So, we have:

V = U / q = 36 mJ / 10 nC

Converting mJ to J and nC to C, we get:

[tex]V = (36 × 10^-3 J) / (10 × 10^-9 C) = 3.6 × 10^7 V[/tex]

Therefore, the electric potential at this point is 3.6 × 10^7 volts.

If a 20 nC charge were placed at this point, its electric potential energy (U) would be:

U = q × V = 20 nC × 3.6 × 10^7 V

Converting nC to C, we get:

[tex]U = 20 × 10^-9 C × 3.6 × 10^7 V = 0.72 J[/tex]

Therefore, the electric potential energy of a 20 nC charge at this point would be 0.72 joules.

Learn more about energy    here:

https://brainly.com/question/1932868

#SPJ11

The negative sign indicates that the direction of the momentum has reversed due to the collision with the wall. Therefore, the change in momentum of the soccer ball is 5 kg m/s in the opposite direction of its initial velocity.

The change in momentum of an object is equal to the final momentum minus the initial momentum.

The momentum (p) of an object is given by the product of its mass (m) and velocity (v):

p = mv

Initially, the soccer ball has a momentum of:

[tex]p_1 = m_1v_1 =[/tex] (0.5 kg)(12 m/s) = 6 kg m/s

After rebounding off the wall, the soccer ball has a velocity of 2 m/s. Therefore, the final momentum is:

[tex]p_1 = m_1v_1 =[/tex] (0.5 kg)(2 m/s) = 1 kg m/s

The change in momentum is then:

Δp =[tex]p_1 = m_1v_1 =[/tex]= 1 kg m/s - 6 kg m/s = -5 kg m/s

Learn more about momentum visit: brainly.com/question/18798405

#SPJ4

True. The index of refraction is a measure of how much a medium can slow down light as it passes through it. The higher the index of refraction, the more the light will be slowed down, resulting in a slower speed of light within the medium.

The index of refraction is a fundamental property of a material that describes how much it can bend and slow down light as it passes through it. It is defined as the ratio of the speed of light in a vacuum to the speed of light in a medium. When light passes from one medium to another, its speed and direction can change due to the change in the index of refraction. The degree of change in the direction of light is proportional to the difference in the index of refraction between the two materials. The higher the index of refraction of a material, the more it can bend and slow down light, resulting in a reduced speed of light within the medium. This property is important in many applications, such as lenses, prisms, and optical fibers.

learn more about index of refraction here:

https://brainly.com/question/23750645

#SPJ11

Based on simulation described, here are four variables that increase induced voltage in pickup coil: 1 ) Increasing number of loops in the coil, 2)Increasing the speed of the rotating magnet 3) Increasing the strength of the magnet 4)  Increasing the rate of water flow onto the whee

Increasing the number of loops in the coil: This increases the amount of wire in the coil, which can capture more of the changing magnetic field and produce a larger induced voltage.

Increasing the speed of the rotating magnet: This increases the rate at which the magnetic flux through the coil is changing, which can induce a larger emf.

Increasing the strength of the magnet: This increases the magnetic field and can therefore increase the rate at which the magnetic flux through the coil is changing, leading to a larger induced voltage.

Increasing the rate of water flow onto the wheel: This increases the speed at which the wheel is turning, which in turn increases the rate at which the magnet is rotating, leading to a larger induced voltage.

Know more about magnetic flux here:

https://brainly.com/question/24214683

#SPJ11

If the spring supports 18 kg without reaching its elastic limit, then it will stretch up to 65.4 cm.

To answer your question, we will use Hooke's Law and the concept of the spring constant.

First, let's find the spring constant (k) using Hooke's Law. Hooke's Law states that the force acting on a spring (F) is directly proportional to the displacement (x) from its equilibrium position:

F = kx

Given that the spring stretches 2.4 cm (0.024 m) when supporting a mass of 0.66 kg, we can find the force (F) using the formula F = mg, where m is the mass and g is the acceleration due to gravity (approximately 9.81 m/s²):

F = (0.66 kg)(9.81 m/s²) = 6.4746 N

Now, we can find the spring constant (k):

6.4746 N = k(0.024 m)
k = 269.775 N/m

Next, we want to find how far the spring will stretch when supporting a mass of 18 kg. Again, we will use Hooke's Law. First, find the force (F) for the 18 kg mass:

F = (18 kg)(9.81 m/s²) = 176.58 N

Now, use Hooke's Law to find the new displacement (x):

F = kx
176.58 N = (269.775 N/m)x
x = 0.654 m

Finally, convert x to centimeters:

x = 0.654 m * 100 cm/m = 65.4 cm

So, when the spring supports a mass of 18 kg and the elastic limit is not reached, it will stretch 65.4 cm.

Learn more about Hooke's Law:

https://brainly.com/question/2648431

#SPJ11

the value of the inductance L is 1.8 * 10^-4 H (henries).

To find the value of the inductance L, we can use the formula:

Vrms = Ipk * sqrt(2) * w * L

Where Vrms is the rms voltage (9.0 V), Ipk is the peak current (60 mA), sqrt(2) is a constant factor, w is the angular frequency (2 * pi * f), and f is the frequency (20 kHz).

Plugging in the values, we get:

9.0 = 60 * 10^-3 * sqrt(2) * 2 * pi * 20 * 10^3 * L

Simplifying, we get:

L = 9.0 / (60 * 10^-3 * sqrt(2) * 2 * pi * 20 * 10^3) = 1.8 * 10^-4 H
Here you can learn more about inductance

https://brainly.com/question/18575018#

#SPJ11  

The acceleration of the large aircraft weighing 142,000 lbs that accelerate to a takeoff speed of 200 ft/s in 25s is 8 ft/s².

To find the acceleration of the aircraft, we can use the formula:

acceleration (a) = change in velocity (v) / time taken (t)

The change in velocity is the takeoff speed minus the initial speed, which we assume is zero since the aircraft is stationary before takeoff. So:

v = 200 ft/s - 0 ft/s = 200 ft/s

The time taken is given as 25 seconds.

So:

a = v / t = 200 ft/s / 25 s = 8 ft/s²

Therefore, the acceleration of the aircraft is 8 ft/s².

Learn more about acceleration here: https://brainly.com/question/26246639

#SPJ11

The energy of a photon of green light with a wavelength of 550 nm is approximately 3.58 x 10^-19 J or 2.23 eV. The wave number of the photon is approximately 1.82 x 10^7 m^-1.

The energy of a photon is given by the equation E = hc/λ, where h is Planck's constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the photon. Substituting these values, we get E = (6.626 x 10^-34 J s x 2.998 x 10^8 m/s) / (550 x 10^-9 m) = 3.58 x 10^-19 J.

To convert joules to electron volts, we use the conversion factor 1 eV = 1.602 x 10^-19 J. Thus, the energy of the photon in electron volts is Eev = E / (1.602 x 10^-19 J/eV) = 2.23 eV.

The wave number of a photon is given by the equation k = 2π/λ. Substituting the wavelength, we get k = 2π / (550 x 10^-9 m) = 1.82 x 10^7 m^-1.

For more questions like Light click the link below:

https://brainly.com/question/10709323

#SPJ11

The force exerted on the spring by the student can be calculated using the formula:F = ma where F is the force, m is the mass of the student, and a is the acceleration of the elevator.

Substituting the given values, we get: F = (64 kg) × (3.3 m/s^2) = 211.2 N The spring exerts an equal and opposite force on the student, which can be calculated using Hooke's law: F = kx where F is the force exerted by the spring, k is the spring constant, and x is the displacement of the spring from its equilibrium position. Solving for x, we get x = F/k Substituting the given values, we get: x = (211.2 N) / (2800 N/m) = 0.0756 m Therefore, the spring is compressed by approximately 7.6 cm.

Learn more about   spring  here:

https://brainly.com/question/14670501

#SPJ11

The response D is correct as hot water has more energy than cold water, causing the molecules to move faster, leading to faster dissolution.

Hot water dissolves substances faster than cold water due to its higher energy level. The heat energy causes the water molecules to move faster, which increases the kinetic energy of the particles in the substance being dissolved. This therefore raises the probability of particle collisions, which accelerates the rate of disintegration.

Additionally, the stronger intermolecular forces between the water molecules make it easier for the solute particles to dissolve due to their increased energy level. This is why substances dissolution occurs faster in hot water than cold water.

To know more about solubility, visit,

https://brainly.com/question/23946616

#SPJ1

Complete question - Zeplin is investigating how long different substances take to dissolve in water. He timed how long each tested substance took to dissolve twice: once in cold water, and once in hot water. He noticed they dissolved faster in the hot water for every test. Which statement explains why this happened?

Responses:

A Hot water has more volume than cold water, so substances spread to fill space.

B Hot water has more gravity than cold water, so particles break up more quickly.

C Hot water has more oxygen than cold water, and oxygen absorbs substances.

D Hot water has more energy than cold water, causing the molecules to move faster.