Hello!
Using the equation for the magnetic force on a current-carrying wire:
[tex]F_B = \vec{B} \times i\vec{L}[/tex]
[tex]F_B[/tex] = Magnetic Force (0.38 N)
B = Magnetic field strength (T)
i = Current in wire (4.75 A)
L = Length of wire (0.25 m)
This is a cross product, so we can rewrite the equation as:
[tex]F_B = BiLsin\phi[/tex]
Where φ is the angle between the magnetic field vector and the length vector. In this instance, since the field is perpendicular to the wire, sin(90) = 1. We can simplify the equation to:
[tex]F_B = BiL[/tex]
Rearrange the equation to solve for 'B':
[tex]B = \frac{F_B}{iL}[/tex]
Plug in given values and solve.
[tex]B = \frac{0.38}{(4.75 * .25)} = \boxed{0.32 T}[/tex]
The strength of the magnetic field will be 0.32 T.Option B is correct.
What is magnetic field strength?The number of magnetic flux lines on a unit area passing perpendicular to the given line direction is known as induced magnetic field strength .it is denoted by B.
Given data:
(I) current = 4.75-A
(B)induced magnetic field strrength=?
(L)length of the wire=0.25-m
(F)Magnetic force=0.38 N
The strength of the magnetic field is found as:
[tex]\rm F_B=BILsin \theta \\\\\ \theta = 90^0 \\\\ \rm F_B=BIL \\\\[/tex]
Substitute the values:
[tex]\rm 0.38 = B \times 4.75 \times 0.25 \\\\\ B= \frac{0.38}{4.75 \times 0.25 } \\\\\ B=0.32 \ T[/tex]
The strength of the magnetic field will be 0.32 T.
Hence, option B is correct.
To learn more about the strength of induced magnetic field refer ;
https://brainly.com/question/2248956
#SPJ1
How do I do this? I’m super confused.
Explanation:
yes, correct, from the batteries, wires and bulbs. in short, from everything that is part of the circuit.
electricity is just a push on mostly already existing electrons to move along.
a battery has a surplus of electrons at the "-" pole, and an electron deficiency at the "+" pole. that creates an electromagnetic "pressure" (voltage), the surplus (ampere) squeezes into the circuit, while the deficiency pulls like a vacuum, and all that creates an electromagnetic field around the whole circuit, which moves also the existing electrons, pushing/sucking electrons at the end of the circuit "chain" into the "+" pole.
The angular speed of a wheel of bicycle is 8pi rad/s what is period of rotation
I hope this woll work.Best of luck.Sorry of the answer ia wrong
How long does 100m long train take a cross a bridge of length 4.9 km at a speed of 50m/s
Answer:
it would take 100s for the train to crossthe bridge
A track consists spring launcher on one end. A spring which is compressed 0.5 m has a
spring constant of 25 N/m. A 0.05 kg ball is resting at the end of the spring. When
released, the spring pushes the ball down the track. It collides and sticks to a second
block of 0.05 kg at rest.
(a) The velocity of the first ball before the collision with the second ball is 11.18 m/s.
(b) The final velocity of the two balls after the collision is determined as 5.59 m/s.
Speed of the block when pushed by the spring
The speed of the block when pushed by the spring is calculated as follows;
K.E = Ux
¹/₂mv² = ¹/₂kx²
mv² = kx²
v² = kx²/m
v² = (25 x 0.5²)/0.05
v² = 125
v = 11.18 m/s
Final velocity of the two balls after the collisionThe velocity of the two balls after the collision is calculated as follows;
Pi = Pf
where;
Pi is initial momentum Pf is final momentumm1u1 + m2u2 = v(m1 + m2)
0.05(11.18) + 0.05(0) = v(0.05 + 0.05)
0.559 = 0.1v
v = 5.59 m/s
Learn more about velocity here: https://brainly.com/question/4931057
#SPJ1
Find the magnetic field (positive magnitude only, no direction) at point p. i1 = 12.0 a r1=2.40 m i2 = 10.0 a r2 = 1.25 m
The magnetic field (positive magnitude only, no direction) at point p is further explained below.
B=1.89*10^{-6}
What is the magnetic field (positive magnitude only, no direction) at point p.?Generally, the equation for magnetic field is mathematically given as
[tex]B= \frac{\mu0}{2\pi}*\frac{I1}{r1}[/tex]
Therefore
[tex]B1= \frac{2*10^{-7}(10)}{240}[/tex]
B1=1*10^{-6}T
and
[tex]B2= \frac{2*10^{-7}(10)}{1.25}[/tex]
B2=1*10^{-6}T
In conclusion,
[tex]B=\sqrt{B1^2+B2^2}[/tex]
B=1.89*10^{-6}
Read more about magnetic
https://brainly.com/question/7802337
#SPJ1
Five locations are marked on the world map. which location is most prone to hurricanes? five locations are marked on the world map. which location is most prone to hurricanes?
a.
b.
c.
d.
e.
Five locations are marked on the world map. The spot that is prone to hurricane mostly A.
What is hurricane?A hurricane is a cyclone with winds of 74 miles (119 kilometers) each hour or more prominent that is typically joined by downpour, thunder, and lightning, and that occasionally moves into calm scopes.
The locations on the world map spot A, B, C, D, E are regions with country prone to hurricane.
The SPOT A, is GULF of Mexico, a sea bowl nearer to the Atlantic sea, encompassed with the North American landmass, the Hawaiian island is likewise inside that locale.
The SPOT B, is the southern Pacific sea with nations like BRAZIL, PERU, ECUADOR, CHILE, in that equivalent locale. This is likewise visited by the tropical storm.
The SPOT C, is inside the locales of AFRICA, nations at the edge are likewise impacted by typhoon.
The SPOT D, is Asian landmass with Russia at the edge. They are likewise inclined to typhoon.
The SPOT E, is the North Pacific sea locale situated at the upper left hand side of the world guide, with nations like Canada, Alaska and co. Near the artic circle.
Thus, location A is the most prone to hurricanes.
Learn more about hurricane.
https://brainly.com/question/18950883
#SPJ1
I believe the answer is A. a
I've done the test, 16/16
what is precision?what is precision?
Answer:
According to Oxford Dictionaries "Precision" means "the quality, condition, or fact of being exact and accurate."
Explanation:
Hope this helps! :)
The voltage provides the push for an electric current within the electromagnet. What is your evidence that a magnetic field is also present
The evidence that a magnetic field is also present is the paper clips get attracted to the rod.
What is magnetic field?It is the region of space where an object experiences magnetic force either attracted or repelled.
The voltage provides the push for an electric current within the electromagnet. The paper clips placed nearby will get attracted towards the magnetic material rod.
Thus, this give an evidence that magnetic field is also present.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ1
A surfacing whale in an aquarium produces water wave crests every 0.40 seconds. If the water wave travels at 4.5 meters per second, the wavelength of the wave is
For a surfacing whale in an aquarium produces water wave crests every 0.40 seconds.is mathematically given as
w= 1.8m
What is the wavelength of the wave?Generally, the equation for is mathematically given as
w=V*T
Therefore
w=V*T
w=4.5 m/s*0.40s
w= 1.8m
In conclusion, the wavelength of the wave
w= 1.8m
Read more about wavelength
https://brainly.com/question/13533093
#SPJ1
What was the name of the first living being to be put into orbit?.
Question 9 of 25
Which term describes something that changes during an experiment?
OA Variable
OB. Vector
OC. Data
OD. Hypothesis
Answer:
C
Explanation:
What is the direction of a current that experiences the magnetic force shown above
east
south
north
west
Answer:
Sorry if I kwon the
answer I telling u
the answer sorry
how can geo thermal energy be used ?
Answer:
Geothermal energy can heat, cool, and generate electricity: Geothermal energy can be used in different ways depending on the resource and technology chosen—heating and cooling buildings through geothermal heat pumps, generating electricity through geothermal power plants, and heating structures through direct-use
Explanation:
geothermal energy, form of energy conversion in which heat energy from within Earth is captured and harnessed for cooking, bathing, space heating, electrical power generation, and other uses. Heat from Earth's interior generates surface phenomena such as lava flows, geysers, fumaroles, hot springs, and mud pots.
Two waves overlap producing a new wave that exhibits destructive interference. Which statement correctly describes the new wave?
A. It has a larger amplitude than the waves that overlapped to produce it.
B. It has deeper troughs than the waves that overlapped to produce it.
C. It has taller crests than the waves that overlapped to produce it.
D. It has a smaller amplitude than the waves that overlapped to produce it.
A new wave created by the destructive interference of two waves is produced. The new wave is accurately described in statement A. Its amplitude is greater than that of the waves that produced it.
What is the definition of destructive interference?Destructive interference happens when the maxima of two waves are 180° out of phase; a positive displacement of one wave is canceled exactly by a negative displacement of the other wave.
Two or more waves combining to produce a wave with a smaller displacement is called destructive interference.
Two waves overlap producing a new wave that exhibits destructive interference. It has a larger amplitude than the waves that overlapped to produce it.
Hence, statement A correctly describes the new wave.
To learn more about destructive interference, refer to the link;
https://brainly.com/question/16098226
#SPJ1
A parallel plate air capacitor has a capacitance of 10 to the power -9. What potential difference is required for a charge of 5×10 to the power -5 C? What is the total energy stored in it?
The potential difference across the capacitor is 5 × 10∧4 volts and the energy stored in it is 1. 25 Joules
What is the energy in a capacitor?
The energy stored in a capacitor is an electrostatic potential energy.
It is related to the charge(Q) and voltage (V) between the capacitor plates.
It is represented as 'U'.
How to determine the potential difference
Formula:
Potential difference, V is the ratio of the charge to the capacitance of a capacitor.
It is calculated using:
V = Q ÷ C
Where Q = charge 5 × 10∧-5C and C = capacitance 10∧-9
Substitute the values into the equation
Potential difference, V = 5 × 10∧-5 ÷ 10∧-9 = 5 × 10∧4 volts
How to determine the energy stored
Formula:
Energy, U = 1 ÷ 2 (QV)
Where Q= charge and V = potential difference across the capacitor
Energy, U = 1 ÷ 2 ( 5 × 10∧-5 × 5 × 10∧4)
= 0.5 × 25 × 10∧-1
= 0.5 × 2.5
= 1. 25 Joules
Therefore, the potential difference across the capacitor is 5 × 10∧4 volts and the energy stored in it is 1. 25 Joules
Learn more about capacitance here:
https://brainly.com/question/14883923
#SPJ1
it is seen that in a balloon filled with air,if we press one side of the balloon the other side bulges out.why is it so???
When we apply pressure on the one side of balloon the other side bulges out due to the movement of gas to other side.
What happen when we press one side of the balloon?If we press one side of the balloon, the other side bulges out because the gas that present on one side moves to the other side where there is no pressure. The body of balloon is elastic so when we apply pressure the other side bulges out.
So we can conclude that when we apply pressure on the one side of balloon the other side bulges out due to the movement of gas to other side.
Learn more about pressure here: https://brainly.com/question/25736513
#SPJ1
A boy on rollerskates is travelling along at 8 m/s. He has a mass of 60 kg and is carrying his
school bag of mass 10 kg. He throws the bag directly forward at 20 m/s relative to the
ground. Calculate the boy's speed after throwing the bag forward?
Answer:
6m/s
Explanation:
the original momentum = mass x velocity = 8x (60+10) = 560
momentum after = mass x velocity of the school bag + mass x velocity of the boy = 10x20 + 60x A
200+60A = 560
A=6
As waves approach the shore, they ________. Group of answer choices are reflected off the shoreline but never refract refract so as to impact the shore nearly perpendicular to the shoreline reflect directly backward from the angle at which they approach the shoreline refract so as to impact the shore in a nearly parallel manner
As waves approach the shore, they refract so as to impact the shore in a nearly parallel manner.
What is Water wave?This is a type of mechanical wave and requires a medium for its propagation which in this case is water.
This type of wave refract and impact the shore in an almost parallel manner hence option D being chosen.
Read more about Water wave here https://brainly.com/question/10732902
#SPJ1
2. Use the pattern of charge distribution to draw the relative size of the atoms in the space below. Please fill out the table!!! thank you
Potassium will have the greatest atomic size because of its number of shells, followed by sodium which 1 valence electron compared to magnesium the same number of shells but 2 valence electrons.
Relative size of the atomsThe relative size of the atoms is determined from the number of shells and valence electron contained in the atom.
Sodium, 11 ----> 2, 8, 1
Magnesium, 12 ----> 2, 8, 2
Potassium, 19, -----> 2, 8, 8, 1,
Potassium will have the greatest atomic size because of its number of shells, followed by sodium which 1 valence electron compared to magnesium the same number of shells but 2 valence electrons.
Learn more about atomic size here: https://brainly.com/question/15255548
#SPJ1
Air escaping out from an air hose at a gas station always feels cool. Why?
Answer:
The air is contained at a high pressure in the tube. When it escapes from a small orifice, it suddenly expands. A large amount of its heat is absorbed in the process of expansion resulting in considerable fall in its temperature. This is why the escaping air feels cold.
A flywheel rotating at an initial velocity of 2.09 rad/s undergoes a change to 4.6 rad/s for precisely 5s
a) Calculate the angular acceleration of the flywheel.
b) Suppose the flywheel has moment of inertia of 1.5 kg m^2. Compute the wheels torque?
[Please answer if you know]
Answer:
A. 0.502
B. 0.753
Explanation:
A. The angular acceleration of the flywheel is equal to the change in angular velocity divided by the change in time, which is equal to (4.6-2.09)/5 which is 0.502.
B. Angular acceleration is equal to the net torque divided by the rotational inertia. If you rearrange the equation, torque is equal to angular acceleration times rotational inertia, which is 0.502 times 1.5 which is 0.753.
Answer:
Assumption: the angular acceleration of this flywheel is constant.
Angular acceleration: [tex]0.502\; {\rm rad\cdot s^{-2}}[/tex].
Net torque on this flywheel: [tex]0.753\; {\rm kg \cdot m^{2} \cdot s^{-2}[/tex] (or, equivalently, [tex]0.753\; {\rm N \cdot m}[/tex].)
Explanation:
Change in the angular velocity of this flywheel:
[tex]\begin{aligned}\Delta \omega &= \omega_{1} - \omega_{0} \\ &= 4.6\; {\rm rad \cdot s^{-1}} - 2.09 \; {\rm rad \cdot s^{-1}} \\ &= 2.51\; {\rm rad \cdot s^{-1}}\end{aligned}[/tex].
Divide this change in angular velocity [tex]\Delta \omega[/tex] with the duration [tex]t[/tex] of the acceleration to find the average angular acceleration of this flywheel:
[tex]\begin{aligned}\alpha &= \frac{\Delta \omega}{t} \\ &= \frac{2.51\; {\rm rad \cdot s^{-1}}}{5\; {\rm s}} \\ &= 0.502\; {\rm rad \cdot s^{-2}}\end{aligned}[/tex].
By Newton's Second Law for Rotation, the net torque on this flywheel would be the product of the angular acceleration and the moment of inertia of this flywheel, [tex]I[/tex]:
[tex]\begin{aligned}\tau_{\text{net}} &= I\, \alpha \\ &= 1.5\; {\rm kg \cdot m^{2}} \times 0.502\; {\rm s^{-2}} \\ &= 0.753\; {\rm kg \cdot m^{2} \cdot s^{-2}} \\ &= 0.753\; {\rm (kg \cdot m \cdot s^{-2}) \cdot m} \\ &= 0.753\; {\rm N \cdot m}\end{aligned}[/tex].
How does the value of gravity vary as you go:
i. above the earth surface?
ii. below the earth surface?
Answer:
Gravity changes with altitude. as we know The gravitational force is proportional to 1/R2, where R is your distance from the center of the Earth.
eg. The radius of the Earth at the equator is 6400 kilometers.
Let's say you were in a jet at the equator that was 40 kilometers high above the earth's surface.
may be helpfull
A basketball, a pool cue ball, and a golf ball all fall down in the absence
of air resistance. Which of the following is true about their
acceleration?
The acceleration of all objects increases when there is no air resistance because air resistance slow down the speed of an object.
What is acceleration?
The rate of change in velocity over time is known as acceleration. Velocity is the speed of an object in a specific direction. Acceleration occurs when change occurs in velocity.
So we can conclude that the acceleration of all objects increases when there is no air resistance because air resistance slow down the speed of an object.
Learn more about air here: https://brainly.com/question/441281
#SPJ1
What is true about determining the time of death of a victim?
group of answer choices=
forensic pathologists usually determine the exact time of death.
determining the time of death is critical to all criminal cases.
forensic scientists can often provide an estimated time of death.
the exact time of death can only be determined with dna evidence.
Forensic scientists can often provide an estimated time of death. Option C is correct.
What is forensic science?By gathering and evaluating evidence, forensic science specialists support criminal investigations. Numerous technicians focus on either laboratory analysis or crime scene investigation.
Often, forensic experts can approximate the time of death.
Hence, the right answer is C.
To learn more about the forensic science refer;
https://brainly.com/question/21601148
#SPJ1
On a hot day, the deck of a small ship reaches a temperature of 48
17.0°C seawater on the deck to cool it down. During the cooling, 3,710,000 J are transferred to the
seawater from the deck. Assume no energy or mass is lost from the system. Use c = 3,930 J/kg°C for
seawater.
Calculate the final temperature of the seawater-deck system.
Write your answer rounding to the nearest tenth.
The final temperature of the seawater-deck system is 990°C.
What is heat?The increment in temperature adds up the thermal energy into the object. This energy is Heat energy.
The deck of a small ship reaches a temperature Ti= 48.17°C seawater on the deck to cool it down. During the cooling, heat Q =3,710,000 J are transferred to the seawater from the deck. Specific heat of seawater= 3,930 J/kg°C.
Suppose for 1 kg of sea water, the heat transferred from the system is given by
3,710,000 = 1 x 3,930 x (T - 48.17)
T = 990°C to the nearest tenth.
The final temperature of the seawater-deck system is 990°C.
Learn more about heat.
https://brainly.com/question/13860901
#SPJ1
The unit of length most suitable for measuring the thickness of a cell phone is a . The unit of length most suitable for measuring the height of a backyard tree is a?
The answers include the following:
The unit of length most suitable for measuring the thickness of a cell phone is a meter.The unit of length most suitable for measuring the height of a backyard tree is a meter.What is Meter?This is defined as the standard unit for measuring the length of a body and is denoted as m.
Height is a vertical type of length which is why meter was chosen as the most appropriate choice.
Read more about Meter here https://brainly.com/question/1578784
#SPJ1
when a metal sphere is dropped in to a tall cylinder containing liquid its acceleration is g÷2 (gravity over 2) show that : density of metal =2density of liquid
The density of the metal sphere is 2 times the density of the liquid as proved.
Net upward force acting on the metal sphereThe net upward force acting on the sphere as it is dropped into the liquid is calculated as follows;
F = σVg - ρVg
ma = σVg - ρVg
where;
ρ is density of the liquidσ is the density of the metala is acceleration of the metalσV(a) = σVg - ρVg
σ(a) = σg - ρg
σ(g/2) = σg - ρg
g(σ/2) = g(σ - ρ)
σ/2 = σ - ρ
σ/2 - σ = - ρ
-σ/2 = - ρ
σ = 2ρ --- proved
Thus, the density of the metal sphere is 2 times the density of the liquid as proved.
Learn more about density here: brainly.com/question/1354972
#SPJ1
none hsbisneienbjsnsidns ueheijejeie idhdidnis idndidjd idjdi
Answer:
A crane does exactly 1800 J of work to lift a steel beam from the ground. The beam is accidentally dropped and falls back to its starting position in 0.9 s. What is the mass of the beam
Answer:
Explanation:
1800x0.9=1620kg
You apply a horizontal force of 25N to push a shopping cart across the parking lot at a constant velocity. a) what is the net force on the shopping cart ? b) What is the force of friction on the shopping cart ? c) What will happen to the shopping cart if you come across a wet portion of the parking lot and you continue to apply the same force ?
(a) The net force on the shopping cart is zero.
(b) The the force of friction on the shopping cart is 25 N.
(c) When same force is applied to the shopping cart on a wet surface, it will move faster.
Net force on the shopping cartThe net force on the shopping cart is calculated as follows;
F(net) = F - Ff
where;
F is the applied forceFf is the frictional forcema = F - Ff
where;
a is acceleration of the cartm is mass of the cartat a constant velocity, a = 0
0 = F - Ff
F(net) = 0
F = Ff = 25 N
Net force is zero, and frictional force is equal to applied force.
On wet surfaceCoefficient of kinetic friction of solid surface is greater than that of wet surface.
Since frictional force limit motion, when the frictional force is smaller, the object tends to move faster.
Thus, the cart will move faster on a wet surface due to decrease in friction.
Learn more about frictional force here: https://brainly.com/question/24386803
#SPJ1