The following data from an experiment to ascertain the effect of water temperature on the amount of sugar that dissolves in a beaker of water were present, and the following components were to be identified:
Water content (mL) - constant Amount of Sugar's temperature is constant. The water's temperature (°C) is variable. Sugar dissolved in water (g): variesThe experiment is divided into three main sections:
Independent variable: These are the factors that the researcher modifies or manipulates to observe the impact on the dependent variable. The temperature of the water acts as an independent variable in this experiment since it influences how much sugar dissolves.Dependent variables :the variables that vary along with and in response to changes in the independent variables. The dependent variable in this experiment is the amount of sugar that dissolves as a function of the change in water temperature.Constant or control: these are the elements that remain the same throughout the experiment, preventing any additional influences from having an impact on the dependent variableSo, the correct answer is -
Water content (mL) - constantAmount of Sugar's temperature is constant.The water's temperature (°C) is variableSugar dissolved in water (g): varies.To know more Independent variable click on below link:
https://brainly.com/question/1479694#
#SPJ4
Complete question:
A student conducted an investigation to determine the effect of water temperature on the amount of sugar that dissolves in a beaker of water. Identify components for trial 1 of this investigation.
What mass of sodium phosphide would be needed to react fully with 5.4x1025 formula units of
strontium oxide?
Answer:
5974 g of Na₃P
Explanation:
We determine the reaction:
2Na₃P + 3SrO → 3Na₂O + Sr₃P₂
2 moles of sodium phosphide react to 3 moles of strontium oxide to produce 3 moles of sodium oxide and 1 mol of strontium phosphide.
We know that 1 mol of anything contains 6.02×10²³ formula units, so:
5.4×10²⁵ formula units . 1 mol/6.02×10²³ formula units = 89.7 moles
This is the amount we have, initially for SrO.
Ratio is 3:2. 3 moles of SrO react to 2 Na₃P
Then 89.7 moles of SrO may react to (89.7 . 2) /3 = 59.8 moles of Na₃P
We convert the moles to mass (mass . molecular weight)
59.8 mol . 99.9 g /mol = 5974 g
does anyone know this please?
Answer:
1.) b
2.) c
3.) e
4.) g
5.) j
6.) k
HOPE THIS HELPS
-Todo <3
Explanation:
Answer:B, C, F, G, I, L.
Explanation: i think that these are the correct one there was not a whole lot of contects on the question
What evidence from the experiment shows that conduction occurred? In your answer, be sure to include the materials involved in the transfer of heat through conduction.
Answer:
Sample Response: The melting of the chocolate pieces one by one showed that it was caused by heat flowing through the foil bridge. The transfer of heat happened between the foil bridge and the chocolate pieces because they were touching each other.
Answer:
The conduction was made by the foil which was touching the chocolate made the chocolate slowly melt because of the tea light giving heat to the foil the foil conducted it to the chocolate causing it to melt.
Explanation:
Conduction is the transfer of heat through touch.
Convection is the transfer of heat through liquid or gas.
Radiation is how heat/energy travels through space.
Hope this helped!
NEED HELP ASAP PLSSS
Please read the below paragraphs and then answer the 2 questions in complete sentences.
Natural selection was proposed by Charles Darwin to explain how new species evolve. All types of living things have small differences between the individuals in the species. If one of those differences allows the individual to live longer, they will likely have more offspring. As that trait is passed on, the population starts to look more like the successful individual. Over time, the species changes.
In 1896, J. W. Tutt suggested that the peppered moths were an example of natural selection. He recognized that the camouflage of the light moth no longer worked in the dark forest. Dark moths live longer in a dark forest, so they had more time to breed.
1. What is natural selection?
2. How are peppered moths an example of natural selection?
FOLLOW THE INSTRUCTIONS PLZZZ
1.Natural selection is the differential survival and reproduction of individuals due to differences in phenotype. It is a key mechanism of evolution, the change in the heritable traits characteristic of a population over generations.
2.Because predators were able to spot the light moths more easily, the dark moths were more likely to survive and reproduce. ... The peppered moth case is an example of natural selection. In this case, changes in the environment caused changes in the characteristics that were most beneficial for survival
Metallic bonding is sometimes referred to as a "sea of electrons." I sometimes picture is as cheerios (nuclei) floating around in milk (valence electrons). And while metallic bonding has the name "bond" it can be very different from Ionic and Covalent Bonds.
In complete sentences describe how Metallic bonds are alike, and how they are different from the other bond types we have studied.
The substances below are listed by increasing specific heat capacity value. Starting at 30.0 °C, they each absorb 100 kJ of thermal energy. Which one do you expect to increase in temperature the most? (3 points)
a
Silver, 0.239 J/(g °C)
b
Aluminum, 0.921 J/(g °C)
c
Lithium, 3.56 J/(g °C)
d
Water, 4.184 J/(g °C)
Answer:
the answer is B
Explanation:
An object has balanced forces acting on it. Which of the following describes the result these balanced forces have on the object? A. It remains at rest or speeds up in the same direction. B. It speeds up in the same direction or moves at constant speed. C. It speeds up in the same direction or slows down. D. It remains at rest or moves at constant speed in the same direction.
Answer:
C.It remains at rest or moves at constant speed in the same direction.
Explanation:
First, remember the Newton's 1st law of motion which states that the object at rest will remain at rest and that in motion will stay in motion with the same speed and same direction unless acted by unbalance forces.
Balanced forces on an object occur when two forces at act on an object are equal in size and act in opposite direction. In this case, a stationary object will stay at rest while an object moving will continue to move at the same speed and same direction.
An object acted by balanced forces is said to be at equilibrium, thus the state of motion will be maintained.The object will not accelerate. A good example of an object acted by balanced forces is an object at rest or in constant motion such as a car that stopped at red-light signal or a car travelling at a constant speed.
Q3. When copper (II) chloride reacts with silvernitrate, copper (II) nitrate and silverchloride are formed.Write the balanced equation for the reaction given above:A.CuCl2(aq) + 2 AgNO3(aq) →Cu (NO3)2(aq) + 2 AgCl(s)B.CuCl2(aq) + NaNO3(aq) →Cu (NO3)2(aq) + AgCl(s)C.CuCl2(aq) + 2 NaNO2(aq) →Cu (NO2)2(aq) + 2 AgCl(s)D.CuCl(aq) + NaNO3(aq) →Cu NO3(aq) + AgCl(aq
Answer:
See explanation
Explanation:
When we are writing chemical reaction equations, we must ensure that such equations are balanced. That is, the number of atoms of each element on both sides of the reaction equation are exactly the same.
After we identify the formula of each compound in the reaction, then we proceed the write the balanced reaction equation as follows;
CuCl2 + 2AgNO3 -------> Cu(NO3)2 + 2AgCl
The products of self-ionization of water are
H+
H20
H+ and OH-
OH-
Answer:
3
H+ and OH-
Explanation:
omg pls help i dunno what the frick frack this is
Answer:
1. Mass of KCl produced = 774.8 g of KCl
2. Mass of KNO₃ produced = 13.837g
3. Moles of NaOH made = 0.846 moles
4. Moles of LiCl produced = 0.846 moles
5. Moles of CO₂ produced = 207.6 moles
Explanation:
1. From the equation of reaction, 1 mole of ZnCl₂ produces, 2 moles of KCl.
5.02 moles of ZnCl₂ will produce, 2 × 5.02 moles of KCl = 10.4 moles of KCl
Molar mass of KCl = (39 + 35.5) g/mol = 74.5 g/mol
10.4 moles of KCl = 10.4 × 74.5 g
Mass of KCl produced = 774.8 g of KCl
2. Mole ratio of KNO₃ and KOH = 1:1
O.137 moles of KOH will produce 0.137 moles of KNO₃
Molar mass of KNO₃ = 101 g/mol
Mass of KNO₃ produced = 0.137 × 101 g = 13.837g
3. Molar mas of Ca(OH)₂ = 74.0 g
Moles of Ca(OH)₂ in 31.3 g = 31.3/74.0 = 0.423 moles of Ca(OH)₂
Mole ratio of NaOH and Ca(OH)₂ in the reaction = 2 : 1
Moles of NaOH made = 2 × 0.423 = 0.846 moles
4. Molar mass of MgCl₂ = 95.0 g
Moles of MgCl₂ in 40.2 g = 40.2/95.0 = 0.423 moles
From the reaction equation, mole ratio of MgCl₂ and LiCl = 1:2
Moles of LiCl produced = 2 × 0.423 = 0.846 moles
5. From the equation of reaction, 1 mole of C₆H₁₀O₅ produces 6 moles of cO₂
34.6 moles of C₆H₁₀O₅ will produce 34.6 × 6 moles of CO₂
Moles of CO₂ produced = 207.6 moles
If you want to change the type of element your atom is, you can either
(2 RIGHT CHOICES)
add a proton
add a neutron
add an electron
Answer:
Add a proton and add a neutron
H IT H-C --H + Ħ Н The model above shows the structural formula for ethane. What is the chemical formula for ethane? OA. C2H6 OB. 2CH3 Oc. 8CH OD. C6H2
Answer:
B
Explanation:
A gas has a volume of 15.0 ml at 25 degree Celsius. What is the volume of the gas at 50 degree Celsius.
Answer:
30.0ml
Explanation:
Half of fifty is 25 and 25 represents 15.0ml so 15.0ml×2=30.0ml there for 25+25 is 50
True or False: Only animals can move pollen from plant to plant.
A. True
B. False
i think false because of the wind or insects
Please help me and it have a next one I’m going to post it now
10.00 g of O2 reacts with 20.00 g NO Determine the amount of NO2, limiting reactant, and the excess reactant.
Answer:
Limiting reactant: O₂
Excess reactant: NO
Amount of NO₂ produced: 28.75 g
Explanation:
The balanced equation for the reaction between O₂ and NO to produce NO₂ is the following:
O₂(g) + 2NO(g) → 2NO₂(g)
According to the equation, 1 mol of O₂ reacts with 2 moles of NO to produce 2 moles of NO₂.
We first convert the moles of each compound to mass by using the molecular weight (MW):
MW(O₂) = 16 g/mol x 2 = 32 g/mol
⇒ mass O₂ = 1 mol O₂ x 32 g/mol O₂ = 32 g
MW(NO) = 14 g/mol + 16 g/mol = 30 g/mol
⇒ mass NO = 2 mol NO x 30 g/mol NO = 60 g
MW(NO₂) = 14 g/mol + (2x 16 g/mol) = 46 g/mol
⇒ mass NO = 2 mol NO₂ x 46 g/mol NO₂ = 92 g
For the reactants, the stoichiometric ratio is 32 g O₂/60 g NO. Thus, the mass of O₂ required to completely react with 20.00 g of NO is:
mass of O₂ required = 20.00 g NO x 32 g O₂/60 g NO = 10.67 g O₂
We need 10.67 g of O₂ and we have only 10.00 g, so the limiting reactant is O₂. Thus, the excess reactant is NO.
With the limiting reactant, we calculate the amount of product produced (NO₂). For this, we consider the stoichiometric ratio 92 g NO₂/32 g O₂:
mass of NO₂ produced = 10.00 g O₂ x 92 g NO₂/32 g O₂ = 28.75 g NO₂
Can someone answer this, NO ROBOTS!!!!
Genetic engineering improved the lives if individuals with insulin because it helps the body use and store sugar, since people with diabetes can't produce insulin.
How do the mass number and atomic change as a particle goes through alpha decay?
The air we breathe is a(n) _____.
Type the correct answer in the box. Express your answer to two significant figures.
A reaction between 1.7 moles of zinc Ipdide and excess sodium carbonate ylelds 12.6 grams of zinc carbonate. This is the equation for the
reaction:
Na2CO3 + Zniz - 2Nal +
ZnCoz.
What is the percent yield of zinc carbonate?
The percent yield of zinc carbonate is
5.91
1X.
Answer: The percent yield of zinc carbonate is 5.91 %
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} ZnCO_3=\frac{12.6 g}{125.4g/mol}=0.100moles[/tex]
[tex]ZnI_2[/tex] is the limiting reagent as it limits the formation of product and [tex]Na_2CO_3[/tex] is the excess reagent.
[tex]Na_2CO_3+ZnI_2\rightarrow 2NaI+ZnCO_3[/tex]
According to stoichiometry :
1 mole of produce = 1 mole of
Thus 1.7 moles of [tex]ZnI_2[/tex] will produce=[tex]\frac{1}{1}\times 1.7=1.7moles[/tex] of [tex]ZnCO_3[/tex]
Theoretical yield of [tex]ZnCO_3=moles\times {\text {Molar mass}}=1.7moles\times 125.4g/mol=213.2g[/tex]
percentage yield = [tex]\frac{\text {Experimental yield}}{\text {Theoretical yield}}\times 100=\frac{12.6g}{213.2g}\times 100=5.91\%[/tex]
Answer:
the other person was right EXCEPT it says in 2 significant numbers so the answer is 5.9
Explanation:
i hope this helps. have a wonderful day :))
Balance the following chemical equation:
C2H60+02 → CO2 + H20
Answer:
Explain: In order to balance the chemical equation, you need to make sure the number of atoms of each element on the reactant side is equal to the number of atoms of each element on the product side. In order make both sides equal, you will need to multiply the number of atoms in each element until both sides are equal.
i have six protons and six neutrons. i need help whats the answerrrrrr
Answer:
Carbon-12: with 6 protons and 6 neutrons and an atomic mass of 12.
Explanation:
Four metals were kept in contact with each other. The table below shows the initial temperature of the metals.
Metal Initial Temperature
А
30 °C
B
42 °C
С
25 °C
D
16°C
From which metal will heat flow into all the other metals?
Metal A
Metal B
Metal C
Metal D
Answer:
The answer is B
Explanation:
I'm just big-brained
And because it's hotter than the rest and since all of them are cold "B" is just going to make them warmer.
which system does the endocrine gland influence to fight infections
Answer:
Thymus. This gland makes white blood cells called T-lymphocytes that fight infection and are crucial as a child's immune system develops
1. How many moles are in 3.50 grams of NaCl?
0.0600 mol
O 203 mol
O 78.4 mol
O 0.156 mol
All chemical reactions need the same amount of activation energy
A) true
B) false
I'm obsessed with me as much as you
Say you'd die for me I'd die for me too
And if I lost you I'd still have me I can't lose
When you say that you're obsessed with me, me too
can anybody help me with this
Answer:
Explanation:
If another predator was introduced to this food web, this food web would fail because it won't be balanced well. Let's say the predator eats more food than the eagle. Then the eagle would have less food for itself, and it might go endangered, and vice versa if the eagle eats more. Either way, this would cause almost no worms left and that means there would be an overflow of the rats because there would be no worms for them to be eaten by. This would cause a shortage of crops as well.
I hope this made sense!
What are the sources of the majority of fats and oils in the typical human diet? a )The fats come from plants; the oils come from animals. B )Both fats and oils come from plants. C) Both fats and oils come from animals. D)The fats come from animals; the oils come from plants.
help pleaseeee. over dilutions in chemistry
Answer:
5 L
Explanation:
We'll begin by calculating the molarity of the CaCl₂ solution. This can be obtained as follow:
Mole of CaCl₂ = 0.5 mole
Volume = 2 L
Molarity =?
Molarity = mole /Volume
Molarity = 0.5 / 2
Molarity = 0.25 M
Finally, we shall determine the volume of the diluted solution. This can be obtained as follow:
Molarity of stock solution (M₁) = 0.25 M
Volume of stock solution (V₁) = 2 L
Molarity of diluted solution (M₂) = 0.1 M
Volume of diluted solution (V₂) =?
M₁V₁ = M₂V₂
0.25 × 2 = 0.1 × V₂
0.5 = 0.1 × V₂
Divide both side by 0.1
V₂ = 0.5 / 0.1
V₂ = 5 L
Thus the volume of the diluted solution is 5 L
help me please Iknow it's easy but I need answers asap
Answer:
1-if u are answering light waves question , then the answer is translucent mirror or objects
2- Oxygen
3- compass