A student conducts three experiments to determine how certain quantities influence the centripetal force responsible for an object to spin in a horizontal circle. The student uses one end of a string to attach the object while the other end is connected to a force sensor that allows the student to change the tension on the string, as shown in the figure. The student records data from the three experiments in the table above. Which of the following experiments, if any, collected data that do not agree with the expression for the net centripetal force on the object?

A)The experiment in which mass was changed
B)The experiment in which the radius of the circular path was changed
C)The experiment in which the speed of the object was changed
D)All the data are expected.

The balance of the equation 2Br2 + CaCO3 + H2O = CaBr2 + CO2 + 2HBrO is ensured by the equal distribution of each element between the reactants and the products.

Bromination can take place in a number of ways, depending on the reactant. A saturated molecule is bromine using the free radical technique. An unsaturated hydrocarbon undergoes bromination through an addition mechanism. An aromatic compound is bromined by an electrophilic substitution procedure.

Meta-bromo-benzoic acid and hydrogen bromide are the end products of the chemical reaction between bromine and benzoic acid described above. The bromine water test is a simple way to tell fructose from glucose. The glucose undergoes an oxidation reaction to produce glucuronic acid after interacting with the bromine water solution. Since bromine water has a modest oxidizing effect, fructose does not oxidize in it.

To know more about reactants

https://brainly.com/question/16856363

#SPJ4

Answer:

The striped magnetic pattern develops because, as oceanic crust pulls apart, magma rises to the surface at mid-ocean ridges and spills out to create new bands of ocean floor. Later, after the planet’s magnetic field flips again, the next stripe of new ocean floor aligns its polarity.

Explanation:

hope this helps!

The fundamental relationship between recessional velocity and distance is known as Hubble's law. The relationship between recessional velocity and redshift, excepting very small redshifts, depends on the cosmological model used.

One observational consequence of the expansion is that galaxies appear to move away from you more quickly the further they are from you. As a result, the recessional velocity and distance are related. The Hubble's Law is the name of this phenomenon.

In big bang cosmology, the Hubble law postulates that galaxies move away from the Earth at a rate that is proportional to their distance.

To know more about Hubble's law visit:-

https://brainly.com/question/13705068

#SPJ4

The term "cutoff" in theoretical physics refers to an artificial maximum or minimum value of energy, momentum, or length that is used to exclude objects having values that are more or smaller than these physical quantities from calculations.

A cutoff frequency, also known as a corner frequency or break frequency, is the frequency response threshold at which energy begins to be attenuated (reflected or diminished) rather than pass through a system.

The frequency above or below which the power output of a circuit, such as a line, amplifier, or electronic filter (such as a high pass filter), has decreased to a specific percentage of the power in the passband is known as the cutoff frequency or corner frequency in electronics.

The passband power, commonly known as the 3 dB point since a decline of 3 dB roughly equates to half power, is the proportion that occurs most frequently. The voltage ratio is falling in this case.

To learn more about cutoff values or cutoff frequency from given link

https://brainly.com/question/27986610

#SPJ4

In that, it states that similar poles repel, unlike poles attract and that the force is proportional to the inverse square of the distance between two poles.

The pushing or tugging of an object is considered to be exerting force. Whenever two things interact, push and pull are the result. Stretching and crushing are further examples of force expressions.

An external agent known as a force has the power to alter a body's state of rest or motion. There is a direction and a magnitude to it. When applying force, it is important to consider both the direction of the force and the actual application of the force.

You should emphasize this as the main point of your education at this level because a push or a pull is referred to as a force. In our daily lives, forces appear in many different ways.

Learn more about force here:

https://brainly.com/question/29096913

#SPJ4

The zygote has only one cell. The embryo has many cells. A zygote is known as a zygocyte in medicine. A diploid eukaryote is the name given to the embryo. During the zygote's mitosis, an embryo is created.

A stage after the zygote stage is an embryo. Fertilization is the process that creates the zygote. Human blastocyst (day 5), also known as a blastula, is the term used to describe the hollow cellular mass that develops in the early stages of development. The blastocyst is made up of cells that form an inner cell mass (ICM, embryo blast), an exterior trophectoderm (TE, trophoblast) layer, and a blastocoel (fluid-filled cavity). The first week after conception is when the zygote stage develops. The mix of DNA in the zygote's genome is.

To learn more about zygocyte please click on below link

https://brainly.com/question/29769026

#SPJ4

The product of 1.24 and 107 kilograms expressed in standard form is 1.3268 x 10² kg.

A standard form is a form of writing equations, numbers, or expressions using a certain set of rules.

Standard form is a method often used by scientists to express large number into a more condensed form, usually in power of ten.

The product of 1.24 and 107 kilograms expressed in standard form is calculated as;

1.24 x 107 kg = 132.68 kg

in standard form = 1.3268 x 10² kg

Thus, numbers expressed in standard forms makes it very easy to represent and recall the number.

Learn more about standard form here: https://brainly.com/question/19169731

#SPJ1

Answer:

Below

Explanation:

The time it take the ruler to fall .083 m is given by

  d = 1/2 a t^2       d = .083 m   a = 9.81 m/s^2

       t = .13 s

If  the point on the arm hanging the bob and the pointer are not on the same vertical line then the torque applied by the bob will not be zero.

When the point of arm and the pointer are in same vertical line than the angle between the point of arm and pointer will not be zero. We know that  Torque is defined as the cross product of distance of  point where force is applied  and force applied on the body.

In other words, Torque=distance × Force

or Torque=rFsinθ(since cross product involves sinθ) where r is the distance and F is the applied force.

Since angle is not zero, therefore angle(θ) will be greater than zero,so sinθ have some value which is greater than zero,and it is enough to rotate the system from its equilibrium point.Due to torque,system will become unstable.

To know more about torque, visit here:

https://brainly.com/question/5352966

#SPJ4

(Complete question) is:

If a metal bob is rotated in a uniform circular motion in this experiement, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line?

The magnetic field produced by a conductor that is carrying current relies on the conductor's current and the point's distance from it. The magnetic field runs parallel to the wire in a perpendicular direction.

Given by r = 2 m and B = 5, the magnetic field strength created by a straight wire carrying current is 5. Inquiry 4: As seen in the diagram below, a straight conductor carrying a current of 10A is parallel to another conductor carrying a current of 5A on the other side. Since all closed-loop currents make their own magnetic fields and magnetic fields operating on closed-loop circuits may produce current, magnetism and electricity are closely related. Oersted made the discovery that electric current had a magnetic influence.

To learn more about magnetic field please click on below link

https://brainly.com/question/14848188

#SPJ4

Elements with 2 electrons are called as Group 2 Elements.

As the name says elements with 2 electrons.

Such elements have 2 electrons in their outermost orbit, due to the presence of these 2 electrons in the outermost orbit such elements are not stable.

So, for becoming stable and completing the octet in the outermost orbit the elements need to lose their 2 electrons which are present in the outermost orbit.

Some common examples of such elements is Magnesium, Calcium, and Strontium.

The valency of such elements is 2.

As we know, valency is nothing but the number of electrons which are either lost or taken by the atom for completing their octet.

For more questions on Cations and Anions

https://brainly.com/question/29881978

#SPJ4

Covalent solids exhibit low melting points and boiling points. Therefore, option B is correct.

In a covalent compound, the covalent bond is formed by the mutual sharing of electrons that can hold all molecules together. Shared electron pairs are difficult to give away as nuclei of two elements together share the electrons therefore these types of bonds are stronger.

A covalent network solid can be described as a chemical compound in which the atoms are bonded by covalent bonds in a continuous network. The covalent solids are generally brittle in nature.

The melting points for covalent solids are generally low while high melting points for ionic solids.

Learn more about the covalent compound, here:

brainly.com/question/12144907

#SPJ1

Answer:

Radon and helium both of which form during the decay of heavier elements in bedrock.

Answer:

answer is c

Explanation:

....................

Answer:e all of the above

Explanation:

From 936 firms in 2010 through 3,317 firms in 2021, more businesses reported Scope 3 pollutants in the available CDP dataset.

A zero-carbon economy is being implemented around the world.The Research Based Goals initiative (SBTi) is working with more over 4,000 companies and financial institutions to cut their emissions in accordance with climate science.Learn more about their commitments and goals.

Needed to make an informed transportation decisions, selecting which products or vendors to use, and pushing their suppliers to cut their own emissions are all ways that businesses can lower their Scope 3 emissions.

To know more about Scope 3 visit:

https://brainly.com/question/29546969

#SPJ4

The correct response is 86.913 amu for Rb-87's mass.

Two isotopes of the rubidium (Rb) element exist: Rb-85, which has an atomic mass of 84.9117 amu, and Rb-87, which has an atomic mass of 86.9092 amu. Rubidium has an average atomic weight of 85.4678.

Both isotopes have a ratio of 2.591 to 1. Consequently, there is one Rb-87 atom for every 2.591 Rb-85 atoms.

Rb-85 abundance is 2.591/3.591 = 0.722% for 100% naturally occurring Rb, while Rb-87 abundance is 1 - 0.722 = 0.278.

84.9117 × 0.722 + X × 0.278 = 85.4678

X = 24.1618 / 0.278 X = 86.913 amu 61.306 + X 0.278 = 85.4678 X 0.278 = 85.4678 - 61.306 X 0.278 =86.913

To learn more about mass  please click on below link

https://brainly.com/question/26789700

#SPJ4

The angle measure of the turn is 105 degrees.

Acute Angle: An acute angle is one that is less than 90 degrees. Right Angle: A right angle is one that is exactly 90 degrees. Obtuse Angle An angle larger than 90 degrees is referred to as an obtuse angle.

An automobile moving in the direction of Ward Street on Michigan Street. Onto Ward Street, the automobile intends to turn right. the Ward Street angle is as follows: Michigan St Pennsylvania St The turn's angle is measured as

Since 75+x = 180 (a straight line)

Then x = 180-75=105

Know more about Angles at:

https://brainly.com/question/25716982

#SPJ4

The model will be just like the real solar system when it shows the moon and other satellites revolve around the earth.

Heliocentric model is the most accepted model of the solar system. Heliocentrism is the astronomical model in which the Earth and planets revolve around the Sun at the center of the universe.

The moon and the other satellites revolve around the earth due to the force of gravitation. The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis. As a result, the moon does not seem to be spinning but appears to observers from Earth to be keeping almost perfectly still. Scientists call this synchronous rotation.

learn more about solar system:

https://brainly.com/question/12075871

#SPJ4

The ionic compound for [tex]MgBr_2[/tex] magnesium.

Magnesium bromide is the chemical compound known as [tex]MgBr_2[/tex].

We are aware that ionic compounds are made up of two ions, one of which is a positive-charged cation and the other a negative-charged anion. For instance, when we separate ionic compounds into their constituent ions, we obtain cations and anion.

(a), Breaking of [tex]$\mathrm{MgBr}_2$[/tex] into ions '

[tex]\left.\mathrm{MgBr}_2_(aq) \longrightarrow \mathrm{Mg}_{(\mathrm{aq})}^{2+}+2 \mathrm{Br}_{\left(a q_1\right)}{ }^2\right[/tex]

Cation formula [tex]$=Mg^{2+} (a q)$[/tex]

Anion Formula [tex]$=\mathrm{Br}^{\ominus}(a q)$[/tex]

(b) Breaking of [tex]$\mathrm{FeCl}_3$[/tex] into ions [tex]$\mathrm{L}$[/tex]

[tex]Fecl_{3(aq)}\rightarrow Fe^{3+}(aq)+3cl^-(aq)[/tex]

i.e Cation formula [tex]$=$ fe^ {+3}[/tex]

Anion formula [tex]$=cl^{\theta}(a q)$[/tex]

For more such question on ionic compound.

https://brainly.com/question/2687188

#SPJ4

The birds' collective momentum is in the same direction as a goose's, i.e., the right way, but the goose's momentum is more than that of two ducks.

       0=-2md vd + mg vg

       2md vd/ mg = v g =2 (40) (1.1) /7.6kg

       vg =1.2m/s

       when total momentum is set to zero.

​For more information on momentum kindly visit to

https://brainly.com/question/24030570

#SPJ1

​

​

Answer:

A mass spectrometer uses a magnetic field to separate ions based on their mass-to-charge ratio. The mass of an ion can be calculated from its charge, velocity, and the radius of curvature of its path in the magnetic field, using the formula m = (qBv)/(2πr), where m is the mass, q is the charge, B is the magnetic field, v is the velocity, and r is the radius of curvature.

In this case, the magnetic field is 5.00 mT, the charge of the unknown particle is 2e, and its velocity is 100 m/s. The radius of curvature of the ion's path is measured to be 1.67 mm. Plugging these values into the formula above, we get:

m = (2e * 5.00 mT * 100 m/s) / (2π * 1.67 mm) = 0.24 g/mol

Therefore, the mass of the unknown particle is 0.24 g/mol.

To determine which element the particle is, we can use the periodic table to find an element with a mass-to-charge ratio of 0.24 g/mol. The element with the closest match is magnesium (Mg), which has a mass-to-charge ratio of 24.31 g/mol. Therefore, the unknown particle is likely to be a magnesium ion (Mg²⁺).

The momentum of the performer and cart will decrease.  The momentum of the juggling pin increases. The overall momentum of the entire system will remain the same.

According to the law of conservation of momentum, the sum of the momentum of a body before and after the collision will be equal.

m₁.u₁ + m₂u₂ = m₁ v₁ + m₂.v₂

where m₁ & m₂ is the mass of objects, u₁ & u₂ are their initial speed while v₁ & v₂ is final speed.

Given the initial velocity of the performer and cart is u₁ = 3.5 m/s

The final velocity of the performer and cart = 3.4 m/s

As the velocity of the performer and cart decreases therefore its momentum will increase.

The juggling pin was at rest initially, but its velocity increased from 0 to 6 m/s. Therefore its momentum increases.

Learn more about the law of conservation of linear momentum, here:

brainly.com/question/17140635

#SPJ1

Thus, from largest wavelength radio waves, microwaves, infrared, visible light, ultraviolet, x-rays, and ultimately gamma rays, which have the shortest wavelengths, are available.

To learn more about  frequency of wavelength refer

https://brainly.com/question/10728818

#SPJ4

The questions is incomplete so I answered it in general way.

I= 1/L∫Vdt, where I is the current flowing through the inductor, L is the inductor's inductance, and V is the voltage across the inductor, is the formula that determines the inductor current depending on these input parameters. You will frequently come across the expanded formula I= I0 + 1/L∫Vdt.

A passive two-terminal electrical device known as an inductor, also known as a coil, choke, or reactor, stores energy in a magnetic field as electric current passes through it. Typically, an inductor is made out of insulated wire twisted into a coil.

According to Faraday's law of induction, when the current through the coil changes, the time-varying magnetic field induces an electromotive force (emf) (voltage) in the conductor. Lenz's law states that the induced voltage has an opposing polarity (direction) to the change in current that caused it. Inductors so reject any changes in the current flowing through them.

To know more about inductor

https://brainly.com/question/15893850

#SPJ4

An experiment with an a = 0.012 tail when N = 6 & Preal = 0.15 powered  is 1.0000

A scientific experiment where you do a series of actions and carefully track their outcomes to learn new knowledge. The students will conduct basic laboratory experiments. run, do, perform, or carry out an experiment.

Because it provides scientists with a set of well-organized steps to perform in order to reply to questions or assertions about the natural world, experimentation is essential to science. Additionally, experimenting produces vital data and results that help to verify the veracity and dependability of assertions made in an endeavor to fully know the world.

To know more about experiment

https://brainly.com/question/22967013

#SPJ4

If a lathe turning at a feed rate is used to decrease a long section the stock metal rod's diameter from a diameter of to, the material's specific energy M RR = 109.96 cm3/min.

At any cross-section section of a canal, measured just above channel bottom, the total energy per cent weight of fluid. Where y is the flow depth, v seems to be the average velocity, & g is gravitational attraction, makes up the formula for specific energy, or E.

The proportion of necessary energy (E) towards the volume of removed material is referred to as specific energy (SE) (V). This variable can be used to calculate how much energy is expended on removing material.

To know more about specific energy visit;

https://brainly.com/question/29829977

#SPJ4

The energy of the electromagnetic radiation from the microwave is equal to 5.96 × 10⁻²³ J.

The energy carried by one photon of any electromagnetic radiation is known as photon energy. This energy is directly proportional to the frequency of electromagnetic radiations and inversely proportional to their wavelength.

To calculate the energy of the photon, we can use the following relation:

The mathematical formula of energy of photon: E = hc/λ

where E is energy, h = Planck's Constant is equal to  6.626 × 10⁻³⁴ Js and c = speed of light = 3 ×10⁸ms⁻¹, λ is wavelength of light

Given, the frequency of the electromagnetic radiation, ν = 90 GHz

ν = 90 ×10⁹ Hz

The energy of one photon microwave radiations is equal to E = hν

E = 6.626 × 10⁻³⁴Js ×  90 ×10⁹ s⁻¹

E = 596.34 × 10⁻²⁵

E = 5.96 × 10⁻²³ J

Learn more about photon energy, here:

brainly.com/question/11016364

#SPJ1

The mass of an airplane is  79878 kg.

The product of a particle's mass and velocity is its momentum. Momentum is a vector quantity, meaning it has both magnitude and direction. According to Isaac Newton's second equation of motion, the force acting on a particle equals the time rate of change of momentum.

Given that: an airplane is flying at 246 m/s and has a momentum of 1.968 x 10^7 kg-m/s.

Hence, mass of the airplane = momentum of the airplane/speed

=  (1.968 x 10^7 kg-m/s)/246 m/s

= 79878 kg.

Learn more about  momentum here:

https://brainly.com/question/24030570

#SPJ1