The difference in speed that occurs when a student sits in a fixed position on a boat and throws an object to the right with a velocity V while the boat moves to the left at a velocity that is much slower than the object's velocity can be explained as follows:
When the student throws the object to the right with a velocity V, the boat moves to the left due to the conservation of momentum. This movement of the boat to the left is very small, and its velocity is much slower than that of the object. When the object is in flight, the velocity of the student and the boat is the same as it was before the object was thrown to the right.The difference in speed between the boat and the object is due to the conservation of momentum. The boat and student move in the opposite direction with a velocity that is much smaller than that of the object.
The momentum of the object is equal to its mass multiplied by its velocity, and this momentum must be conserved. When the object is thrown to the right, the momentum of the object is transferred to the boat and the student.
To know more about velocity visit :
https://brainly.com/question/30559316
#SPJ11
TRUE / FALSE.
1) True or False: The exact evolutionary track that a star follows after leaving the main sequence is dependent on the mass of the star.
2) True or False: Helium can never be fused into a higher mass element.
3) True or False: Helium fusion occurs at a lower temperature than Hydrogen fusion.
4) True or False: The Helium Flash is the beginning of Helium fusion in a low mass star that begins explosively.
1)True: The exact evolutionary track that a star follows after leaving the main sequence is indeed dependent on its mass.
2) False: Helium can indeed be fused into higher mass elements under specific conditions.
3)True: Helium fusion generally occurs at a lower temperature compared to hydrogen fusion.
4)True: The Helium Flash marks the beginning of helium fusion in a low-mass star, and it does occur explosively.
True: The exact evolutionary track that a star follows after leaving the main sequence is indeed dependent on its mass.
The mass of a star determines its core temperature, pressure, and density, which in turn dictate the dominant nuclear reactions and subsequent stages of stellar evolution.
High-mass stars follow a different evolutionary path than low-mass stars due to their contrasting internal conditions.
False: Helium can indeed be fused into higher mass elements under specific conditions.
Helium fusion occurs in the core of stars during certain stages of stellar evolution. In low-mass stars like our Sun, helium fusion transforms helium nuclei (alpha particles) into carbon through a series of nuclear reactions known as the triple-alpha process.
In more massive stars, helium can further fuse into heavier elements such as oxygen, neon, and beyond, leading to the synthesis of elements up to iron in the stellar core.
True: Helium fusion generally occurs at a lower temperature compared to hydrogen fusion.
In stars, hydrogen fusion, which primarily takes place during the main sequence phase, involves the conversion of hydrogen nuclei (protons) into helium through the proton-proton chain or the CNO cycle. This process requires higher temperatures (around millions of Kelvin) to overcome the electrostatic repulsion between positively charged protons.
On the other hand, helium fusion occurs at higher densities but lower temperatures (in the tens of millions of Kelvin), where the helium nuclei have sufficient kinetic energy to overcome the stronger Coulomb repulsion between two positively charged alpha particles.
True: The Helium Flash marks the beginning of helium fusion in a low-mass star, and it does occur explosively.
When a low-mass star exhausts its core hydrogen fuel, it begins to contract due to gravitational forces. The increased pressure and temperature cause the core to become hot enough for helium fusion to start.
However, in low-mass stars, the initial conditions for helium fusion are not met smoothly, resulting in a rapid and explosive increase in temperature and pressure, known as the Helium Flash.
This flash is followed by a stable phase of helium fusion, during which the star enters the red giant phase.
To know more about star visit:
https://brainly.com/question/13046284
#SPJ11
Two 10.-ohm resistors have an equivalent resistance of 5.0 ohms when connected in an electric circuit with a source of potential difference. Using circuit symbols found below, draw a diagram of this
circuit.
The resistors are connected in parallel between the terminals of a battery.
Note: If those resistors are connected in parallel, then their equivalent resistance is already 5 ohms, even if they're still in the drawer or in a box on the shelf. They don't have to be connected to a source of voltage for that to happen.
When describing a thermodynamic system, which is a good description of "internal energy"?
In summary, the internal energy of a thermodynamic system is the sum of the potential and kinetic energy of all the particles in the system. It is a property of the system that depends only on the current state of the system and can be affected by a number of factors such as temperature, pressure, and composition of the system.
Internal energy is the energy that is associated with the microscopic components of the system, such as molecules and atoms. The internal energy of a thermodynamic system is the total potential energy and kinetic energy of all of the particles in the system. It includes the energy that is stored in the bonds between atoms and molecules and the kinetic energy of the individual particles. The internal energy of a thermodynamic system is a property of the system that depends only on the current state of the system. It can be increased or decreased by adding or removing heat or work from the system. "The internal energy of a system can be represented by the symbol U. "There are many factors that can affect the internal energy of a thermodynamic system. These include the temperature, pressure, and composition of the system, as well as any external forces that are acting on the system. The internal energy of a thermodynamic system is a key concept in the study of thermodynamics, as it helps to describe the behavior of systems as they undergo changes in temperature, pressure, and other variables.
to know more about Internal energy visit:
https://brainly.com/question/11278589
#SPJ11
an electromagnetic plane wave has an intensity average=800 w/m2. what are the rms values rms and rms of the electric and magnetic fields, respectively?
The RMS values of the electric and magnetic fields are approximate:
Electric field RMS (Erms) ≈ 4.015 x 10⁻⁴ N/C
Magnetic field RMS (Brms) ≈ 1.338 x 10⁻¹² T
The relationship between the intensity, electric field, and magnetic field of an electromagnetic wave is given by:
Intensity = (1/2) x c x ε₀ x E₀²
where:
Intensity is the average power per unit area (in watts per square meter, W/m²).
c is the speed of light in a vacuum (approximately 3 x 10⁸ m/s).ε₀ is the permittivity of free space (approximately 8.854 x 10⁻¹² F/m).E₀ is the amplitude (peak value) of the electric field.To calculate the RMS (root mean square) values of the electric and magnetic fields, we can use the following relationships:Electric field RMS (Erms) = E₀ / √2
Magnetic field RMS (Brms) = (Erms / c)
Let's calculate the RMS values:
Given:
Intensity average (I_avg) = 800 W/m²
Calculate the amplitude (E₀) of the electric field.
Intensity = (1/2) x c x ε₀ x E₀²
E₀² = (2 x Iavg) / (c x ε₀)
E₀ = √[(2 x Iavg) / (c x ε₀)]
Calculate the RMS values.
Electric field RMS (Erms) = E₀ / √2
Magnetic field RMS (Brms) = (Erms / c)
Let's substitute the values and calculate the RMS values:
E₀ = √[(2 x 800) / (3 x 10⁸ x 8.854 x 10⁻¹²)]
E₀ ≈ 5.670 x 10⁻⁴ N/C
Erms = (5.670 x 10⁻⁴) / √2
Erms ≈ 4.015 x 10⁻⁴ N/C
Brms = (4.015 x 10⁻⁴) / (3 x 10⁸)
Brms ≈ 1.338 x 10⁻¹² T
Therefore, the RMS values of the electric and magnetic fields are approximate:
Electric field RMS (Erms) ≈ 4.015 x 10⁻⁴ N/C
Magnetic field RMS (Brms) ≈ 1.338 x 10⁻¹² T
To know more about root mean square value follow
https://brainly.com/question/31325061
#SPJ4
Which of the following are the two factors used to calculate average
speed? *
a. total acceleration and total time
b. velocity and time
c. total distance and total time
d. motion and time
Answer:
i think its its c but im not positive :>
Explanation:
1:How are energy and amplitude of a wave related
2:Define Wavelength
3:What unit is the frequency of a wave measured in?
Please help this is due in 25 minutes
Answer:
2
Explanation:
wave length is the distance between corresponding points of two consecutive waves
3. hertz
a current of 7.07 a in a long, straight wire produces a magnetic field of 8.21 μt at a certain distance from the wire. find this distance.
The distance from the wire at which a current of 7.07 A produces a magnetic field of 8.21 μT is approximately 0.287 meters (or 28.7 cm).
We can use Ampere's law to calculate the magnetic field produced by a current-carrying wire at a certain distance from it.
Ampere's law states that the magnetic field around a long, straight wire is directly proportional to the current and inversely proportional to the distance from the wire.
Mathematically, Ampere's law can be written as:
B = (μ₀ * I) / (2π * r),
where:
B is the magnetic field (in Tesla),
μ₀ is the permeability of free space (4π × 10^(-7) T·m/A),
I is the current in the wire (in Amperes), and
r is the distance from the wire (in meters).
We are given the current I = 7.07 A and the magnetic field B = 8.21 μT. To find the distance r, we need to rearrange the equation and solve for r:
r = (μ₀ * I) / (2π * B).
Now we can substitute the given values and calculate the distance:
r = (4π × 10^(-7) T·m/A * 7.07 A) / (2π * 8.21 × 10^(-6) T)
≈ (2.828 × 10^(-6) T·m²/A) / (1.646 × 10^(-5) T)
r ≈ 0.1715 m.
Therefore, the distance from the wire is approximately 0.1715 meters or 17.15 cm.
The distance from the wire at which a current of 7.07 A produces a magnetic field of 8.21 μT is approximately 0.287 meters (or 28.7 cm).
To know more about current visit:
https://brainly.com/question/1100341
#SPJ11
The numerical value for the position of the component holder of the lens is given by a. 608 mm b. None of the other offered answers. c. 599 mm d.583 mm e. 591 mm
Answer:
B is the answer
trust me
naturo na kasi samin yan eh
uranus and neptune are like the other jovian planets because they:
Uranus and Neptune are like the other Jovian planets because they have a lot of gaseous composition, they lack a solid surface, and they are situated far from the sun.
The Jovian planets are four planets in the outer solar system that are gas giants, also known as the gas planets. They are Jupiter, Saturn, Uranus, and Neptune. In terms of the composition of Uranus and Neptune, they contain methane, ammonia, water, and other elements that form gas. Like the other Jovian planets, they lack a solid surface, and they are situated far from the sun.
The rings of Uranus and Neptune are fainter and less complex than the rings of Jupiter and Saturn, but they share certain features. Both Uranus and Neptune are thought to have a small rocky core surrounded by a mix of rock and ice, then a thick layer of metallic hydrogen, and an atmosphere mainly of molecular hydrogen and helium. So therefore because gaseous composition, lack a solid surface, and situated far from the sun, Uranus and Neptune are like the other Jovian planets.
To know more about Jovian planets visit:
https://brainly.com/question/31384996
#SPJ11
A boy throws a ball vertically up. It returns to the
ground after 5 seconds. Find
(a) the maximum height reached by the ball.
(b) the velocity with which the ball is thrown up.
Answer:
31.25 m
25m/sec
Explanation:
Given :-
Time = 5sec
V = 0 (in going up)
U = 0 (in comming down)
Find :-
H and U by which it is thrown up
Since the total time is 5 sec ,therefore half time will be taken to go up and another half will be taken to go down .
We know that ,
V = U + gt
0 = U - 10*2.5
U = 25 m/sec
Also,
V² = U² +2gs
0 = 625 - 20s
s = 625/20 = 31.25 m
1. What is the role of the battery in an electric circuit? a. Transformer b. Conductor c. Source d. switch
Answer:
Conductor
Explanation:
A battery holds all of the energy in itself. So without the battery, the circuit cannot work.
Hope this helped, and please mark as Brainliest <3
1.45 L of 16°C water is placed in a refrigerator. The refrigerator's motor must supply an extra 10.7 W power to chill the water to 6°C in 0.7 hr. What is the refrigerator's coefficient of performance?
Answer:
The coefficient of performance of the refrigerator is 2.251.
Explanation:
In this case, the coefficient of performance of the refrigerator ([tex]COP[/tex]), no unit, is equal to the ratio of the heat rate received from the water to the power needed to work, that is:
[tex]COP = \frac{\dot Q_{L}}{\dot W}[/tex] (1)
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex] (2)
Where:
[tex]\dot Q_{L}[/tex] - Heat rate received from the water, in watts.
[tex]\dot W[/tex] - Power, in watts.
[tex]\rho[/tex] - Density of water, in kilograms per cubic meter.
[tex]V[/tex] - Volume of water, in cubic meters.
[tex]c_{w}[/tex] - Specific heat of water, in joules per kilogram-degree Celsius.
[tex]\Delta T[/tex] - Temperature change, in degrees Celsius.
[tex]\Delta t[/tex] - Cooling time, in seconds.
If we know that [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]V = 1.45\times 10^{-3}\,m^{3}[/tex], [tex]c_{w} = 4187\,\frac{J}{kg\cdot ^{ \circ}C}[/tex], [tex]\Delta T = 10\,^{\circ}C[/tex], [tex]\dot W = 10.7\,W[/tex] and [tex]\Delta t = 2520\,s[/tex], then the coefficient of refrigeration of the refrigerator is:
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex]
[tex]COP = 2.251[/tex]
The coefficient of performance of the refrigerator is 2.251.
an athlete whirls an 11,7 kg hammer tied to the end of a 1,2 m chain in a simple horizontal circle where you should ignore any vertical deviations. the hammer moves at the rate of 0,489 rev/s. what is the tension along the chain?
The tension along the chain, when an 11.7 kg hammer is whirled at a rate of 0.489 rev/s in a simple horizontal circle with a 1.2 m chain, is approximately 140.79 N.
To find the tension along the chain, we can analyze the forces acting on the hammer in circular motion.
In this case, the tension in the chain provides the centripetal force required to keep the hammer moving in a circle.
The centripetal force is given by the formula:
F = m * v² / r
Where:
F is the centripetal force
m is the mass of the hammer
v is the velocity of the hammer
r is the radius of the circular path
m = 11.7 kg
v = 0.489 rev/s (angular velocity)
r = 1.2 m
To calculate the linear velocity, we need to convert the angular velocity to linear velocity. The formula for converting angular velocity to linear velocity is:
v = ω * r
Where:
v is the linear velocity
ω is the angular velocity
r is the radius of the circular path
Substituting the values, we have:
v = 0.489 rev/s * 2π radians/rev * 1.2 m
v ≈ 3.678 m/s
Now we can calculate the centripetal force:
F = (11.7 kg) * (3.678 m/s)²/ 1.2 m
F ≈ 140.79 N
Therefore, the tension along the chain is approximately 140.79 N.
The tension along the chain, when an 11.7 kg hammer is whirled at a rate of 0.489 rev/s in a simple horizontal circle with a 1.2 m chain, is approximately 140.79 N.
To know more about tension visit:
https://brainly.com/question/29466375
#SPJ11
The only players permitted to wear mitts over gloves are _________.
1 the pitcher and first base player
2 the catcher and outfielder
3 the catcher and first base player
4 the catcher and pitcher
Answer:
the catcher and outfielder
Explanation:
Answer: The catcher and the player at first base are the only players permitted to wear mitts rather than gloves. So, the answer would be 3.
Explanation: I had this on a quiz and got it right.
Hope this helps!
make a rule: based on the measured force between objects that are 10 meters apart, how can you find the force between objects that are any distance apart?
By applying this rule, you can determine the force between objects at any given distance by comparing it to the force measured at a reference distance.
F1 / F2 = [tex](r2 / r1)^2[/tex]
The rule based on the measured force between objects that are 10 meters apart to find the force between objects at any distance apart is as follows:
"The force between two objects is inversely proportional to the square of the distance between them."
Mathematically, this can be expressed as:
F1 / F2 = [tex](r2 / r1)^2[/tex]
Where:
F1 is the measured force between objects at a distance r1.
F2 is the force between objects at a distance r2.
r1 is the initial distance between the objects where the force was measured.
r2 is the new distance between the objects at which the force is to be calculated.
By applying this rule, you can determine the force between objects at any given distance by comparing it to the force measured at a reference distance.
To know more about force here
https://brainly.com/question/23763915
#SPJ4
The frequency of a sound wave is 457 Hz and the speed is
342.5 m/s. What is the sound's wavelength?
Answer:
/\ = 0.75m
Explanation:
v = f × /\
342.5= 457/\
/\ = 0.75m
Tom's mass is 70.0 kg, and Sam's
mass is 50.0 kg. Tom and Sam are
standing 20.0 m apart on the dance
floor. Sam looks up and sees Tom.
Sam feels an attraction. Supposing
that the attraction is gravitational,
find its size. Assume that both Tom
and Sam can be replaced by
spherical masses.
5.84Å~10−10 N
Answer:
5.84×10^-10 N
Explanation:
F=G×ms×mr/r^2
ms=50 kg
mr= 70 kg
r=20 m
F=6.67×10^-11 N×m^2/kg^2×50 kg×70 kg/(20 m)^2
F=5.84×10^-10 N
The gravitational force is [tex]5.84*10^{-10} N[/tex].
What is force of gravitation?The gravitational force is a force that attracts any two objects with mass.
[tex]F=G{\frac{m_1m_2}{r^2}}[/tex]
Where,
F = force
G = gravitational constant
[tex]m_{1}[/tex] = mass of object 1
[tex]m_{2}[/tex] = mass of object 2
r = distance between centers of the masses
[tex]m_{1}[/tex] = 70kg
[tex]m_{2}[/tex] = 50kg
r = 20 m
G = [tex]6.67*10^{-11} Nm^2/kg^2[/tex]
[tex]F= \frac{6.67*10^{-11}*70*50}{20^2}[/tex]
[tex]F = 5.84*10^{-10} N[/tex]
To learn more about Gravitational force here
https://brainly.com/question/12528243
#SPJ2
at what altitude above the earth's surface is the acceleration due to gravity equal to g/ 7?
The altitude above the Earth's surface where the acceleration due to gravity is equal to g/7 is approximately 4.9019353 × 10^7 meters, or 49,019,353 meters, or 49,019.353 kilometers.
The acceleration due to gravity, denoted as "g," is approximately 9.8 meters per second squared (m/s²) near the Earth's surface. To determine the altitude at which the acceleration due to gravity is equal to g/7, we can use the formula for the acceleration due to gravity as a function of distance from the center of the Earth.
The formula for the acceleration due to gravity (g') at a certain distance (h) from the Earth's center is given by:
g' = (G * M) / (R + h)²
where:
- G is the gravitational constant (approximately 6.67430 × 10^(-11) m³/(kg·s²)),
- M is the mass of the Earth (approximately 5.972 × 10^24 kg),
- R is the mean radius of the Earth (approximately 6,371,000 meters),
- h is the distance above the Earth's surface.
Given that g' = g/7, we can set up the equation:
g/7 = (G * M) / (R + h)²
Rearranging the equation, we can solve for h:
h = sqrt((G * M) / (g/7)) - R
Substituting the known values, we get:
h = sqrt((6.67430 × 10^(-11) * 5.972 × 10^24) / (9.8/7)) - 6,371,000
Evaluating this equation will give us the altitude above the Earth's surface where the acceleration due to gravity is equal to g/7.
the altitude above the Earth's surface where the acceleration due to gravity is equal to g/7 is approximately 4.9019353 × 10^7 meters, or 49,019,353 meters, or 49,019.353 kilometers.
Learn more about gravity here:
https://brainly.com/question/14874038
#SPJ11
what is the phenomenon that allows the sun's heat to pass through to the earth's surface while stopping it from spreading back into space?
The phenomenon that allows the Sun's heat to pass through to the Earth's surface while stopping it from spreading back into space is the greenhouse effect.
What is the greenhouse effect?In Science, the greenhouse effect can be defined as a terminology that is used by scientists and researchers to describe the role that greenhouse gases such as carbon dioxide, methane, and water vapor, play in keeping the temperature of planet Earth warm.
Generally speaking, greenhouse effect help in the regulation of atmospheric temperature during the day and at night.
However, it is important to note that the greenhouse effect does not result in a fall or decrease in sea levels and lower rainfall in coastal zones.
Read more on greenhouse effect here: brainly.com/question/19521661
#SPJ4
A laser produces light of wavelength 615 nm in an ultrashort pulse.
What is the minimum duration of the pulse if the minimum uncertainty in the energy of the photons is 1.0%?
The minimum duration of the pulse is approximately 3.27 femtoseconds. This calculation is based on the uncertainty principle and the given uncertainty in energy, wavelength, and Planck's constant.
According to the uncertainty principle in quantum mechanics, there is a fundamental limit to the precision with which certain pairs of physical properties, such as energy and time, can be simultaneously known. In the case of light, the uncertainty principle relates the uncertainty in energy (∆E) to the uncertainty in time (∆t) through the equation:
∆E ∆t ≥ h/2π
where ∆E is the uncertainty in energy, ∆t is the uncertainty in time, and h is Planck's constant (approximately 6.626 × 10^(-34) J·s).
We are given the uncertainty in energy as 1.0% of the total energy of the photons. This can be expressed as:
∆E = 0.01 × E
where E is the total energy of the photons.
The energy of a photon can be calculated using the equation:
E = hc/λ
where h is Planck's constant, c is the speed of light in a vacuum (approximately 3.0 × 10^8 m/s), and λ is the wavelength of the light.
Substituting the given wavelength into the equation:
E = (6.626 × 10^(-34) J·s × 3.0 × 10^8 m/s) / (615 × 10^(-9) m)
E ≈ 3.22 × 10^(-19) J
Substituting the value of ∆E into the uncertainty principle equation:
0.01 × E ∆t ≥ h/2π
0.01 × (3.22 × 10^(-19) J) ∆t ≥ (6.626 × 10^(-34) J·s) / (2π)
0.01 × (3.22 × 10^(-19) J) ∆t ≥ 1.05 × 10^(-34) J·s
∆t ≥ (1.05 × 10^(-34) J·s) / (0.01 × 3.22 × 10^(-19) J)
∆t ≥ 3.27 × 10^(-15) s
To convert the time to femtoseconds (fs), we multiply by 10^15:
∆t ≈ 3.27 fs
Therefore, the minimum duration of the pulse is approximately 3.27 femtoseconds.
The minimum duration of the pulse is approximately 3.27 femtoseconds. This calculation is based on the uncertainty principle and the given uncertainty in energy, wavelength, and Planck's constant.
To know more about Planck's constant visit:
https://brainly.com/question/30991884
#SPJ11
When dropping a grape and a bowling ball from a height, the force of gravity would be identical on each object. True or False
A.
FALSE
B.
TRUE
Answer:
I think true but im not sure sorry if this didnt help/
Explanation:
Answer:
true 50%
Explanation:
Block 1 is attached to a spring and oscillates on a horizontal frictionless surface. When block 1 is at a point of maximum displacement, block 2 is placed on top of it from directly above without interrupting the oscillation, and the two blocks stick together. How do the maximum kinetic energy and period of oscillation with both blocks compare to those of block 1 alone?
a. Maximum Kinetic energy - smaller, Period - smaller
b. Maximum Kinetic energy - smaller, Period - greater
c. Maximum Kinetic energy - The same, Period - smaller
d. Maximum Kinetic energy - The same, Period - greater
The correct answer is: a. Maximum Kinetic energy - smaller, Period - smaller. When block 2 is placed on top of block 1 without interrupting the oscillation, the system's mass increases.
As a result, the effective mass of the combined blocks increases, which leads to a decrease in the maximum kinetic energy of the system. This is because the kinetic energy is directly proportional to the mass of the system. Additionally, the period of oscillation is determined by the mass and the spring constant of the system. With an increase in the combined mass of the blocks, the period of oscillation becomes smaller. This is because the effective mass affects how quickly the system can oscillate back and forth, and a larger mass requires more time to complete each oscillation. Therefore, when block 1 and block 2 stick together, the maximum kinetic energy decreases compared to block 1 alone, and the period of oscillation also decreases.
To learn more about Kinetic energy, Click here:
https://brainly.com/question/16012885
#SPJ11
The input cylinder has a radius of .01 m and you are able to apply a force of 200 N to it. What radius do you need to make the output cylinder if the vehicles you are going to work have a mass of 2500 kg.
The radius of the output cylinder is 0.11 m.
Radius of the input cylinder, r₁ = 0.01 m
Input force applied, F₁ = 200 N
Mass of the output cylinder, m₂ = 2500 kg
Since more collisions with the piston occur when the area is increased but the number of molecules per cubic centimetre remains constant, the force is proportional to the area.
Force applied on the output cylinder = Weight of the output cylinder
F₂ = m₂g
F₂ = 2500 x 9.8
F₂ = 245 x 10²N
We know that the force applied on an object is directly proportional to the area of the object.
F ∝ A
So, F₁/F₂ = A₁/A₂
F₁/F₂ = (r₁/r₂)²
200/24500 = (r₁/r₂)²
Therefore, the radius of the output cylinder is,
r₂ = r₁√(24500/200)
r₂ = 0.01 x√122.5
r₂ = 0.01 x 11.06
r₂ = 0.11 m
To learn more about force, click:
https://brainly.com/question/32684929
#SPJ1
A satellite of mass 180 kg is placed into Earth orbit at a height of 100 km above the surface. (a) Assuming a circular orbit, how long does the satellite take to complete one orbit?
1.47
h
(b) What is the satellite's speed?
7430
m/s
(c) Starting from the satellite on the Earth's surface, what is the minimum energy input necessary to place this satellite in orbit? Ignore air resistance but include the effect of the planet's daily rotation.
7.33e+09
J
(a) The satellite takes approximately 1.47 hours to complete one orbit.
(b) The satellite's speed is approximately 7430 m/s.
(c) The minimum energy input necessary to place the satellite in orbit, starting from the Earth's surface, is approximately 7.33 x 10^9 J.
Determine how the satellite take to complete one orbit?(a) To determine the time taken to complete one orbit, we can use Kepler's third law, which states that the square of the orbital period (T) is proportional to the cube of the semi-major axis (a) of the orbit.
Since the satellite is in a circular orbit, the semi-major axis is equal to the radius of the orbit, which is the sum of the Earth's radius (R) and the height above the surface (h). Using the given values, we can calculate T as follows:
T² = (4π² / GM) * a³
T² = (4π² / GM) * (R + h)³
T = √[(4π² / GM) * (R + h)³]
Substituting the known values, we find T ≈ 1.47 hours.
Determine how to find the satellite speed?(b) The speed of the satellite can be determined using the formula for orbital speed:
v = √(GM / r)
where G is the gravitational constant, M is the mass of the Earth, and r is the distance from the center of the Earth to the satellite's orbit (R + h). Plugging in the values, we find v ≈ 7430 m/s.
Determine what is the minimum energy input?(c) The minimum energy input required to place the satellite in orbit can be calculated as the sum of the gravitational potential energy and the kinetic energy of the satellite. The gravitational potential energy is given by:
PE = -GMm / r
where m is the mass of the satellite and r is the distance from the center of the Earth to the satellite's orbit (R + h). The kinetic energy is given by:
KE = 0.5mv²
Plugging in the values, we find the minimum energy input is approximately 7.33 x 10^9 J.
To know more about potential energy, refer here:
https://brainly.com/question/24284560#
#SPJ4
state two other ways in which evaporation is different from boiling
an electron is in the ground state of an infinite square well. the energy of the ground state is e1 = 0.86 ev. use hc=1240 nm ev.
(a) What wavelength of electromagnetic radiation would be needed to excite the electron to the n = 3 state?
nm
(b) What is the width of the square well?
nm
a) The wavelength of electromagnetic radiation needed to excite the electron to the n = 3 state is approximately 1808.26 nm.
b) The width of the square well is approximately 904.13 nm.
To find the wavelength of electromagnetic radiation needed to excite the electron to the n = 3 state, we can use the formula:
λ = hc / ΔE
where λ is the wavelength, h is Planck's constant (6.626 × 10⁻³⁴ J·s), c is the speed of light (2.998 × 10⁸ m/s), and ΔE is the energy difference between the two states.
First, let's convert the energy difference ΔE from electron volts (eV) to joules (J):
ΔE = (3² - 1²) x e₁
ΔE = (9 - 1) x 0.86 eV
ΔE = 8 x 0.86 eV
ΔE = 6.88 eV
Next, let's convert the energy difference ΔE from eV to joules (J):
1 eV = 1.602 × 10⁻¹⁹ J
ΔE = 6.88 x 1.602 × 10⁻¹⁹ J
ΔE ≈ 1.101376 × 10⁻¹⁸ J
Now we can calculate the wavelength λ:
λ = (hc) / ΔE
λ = (6.626 × 10⁻³⁴ J·s x 2.998 × 10⁸ m/s) / (1.101376 × 10⁻¹⁸ J)
λ ≈ 1.80826 × 10⁻⁶ m
Finally, let's convert the wavelength from meters (m) to nanometers (nm):
1 m = 1 × 10⁹ nm
λ ≈ 1.80826 × 10⁻⁶ m x 1 × 10⁹ nm/m
λ ≈ 1808.26 nm
Therefore, the wavelength of electromagnetic radiation needed to excite the electron to the n = 3 state is approximately 1808.26 nm.
To find the width of the square well, we can use the formula:
L = λ / 2
where L is the width of the square well.
Using the value we calculated for λ in part (a):
L = 1808.26/2 nm
L = 904.13 nm
Therefore, the width of the square well is approximately 904.13 nm.
To know more about electromagnetic radiation follow
https://brainly.com/question/27431416
#SPJ4
you are on a snorkeling trip. deep below the water, you look up at the surface of the water.
At sunset, the angle from the vertical at which you see the sun while snorkeling deep below the water's surface is approximately 42 degrees.
When observing the sun from underwater, we need to consider the phenomenon of refraction, which causes the light to bend as it passes from one medium (air) to another (water). This bending of light is what allows us to see objects above the water's surface from underwater.
To determine the angle at which we see the sun, we can use Snell's Law, which relates the angles of incidence and refraction for light passing through different media. Snell's Law states:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Where:
n₁ and n₂ are the refractive indices of the two media (air and water, respectively).
θ₁ is the angle of incidence (the angle between the incoming light ray and the normal to the water's surface).
θ₂ is the angle of refraction (the angle between the refracted light ray and the normal to the water's surface).
The refractive index of air is approximately 1.0003, and the refractive index of water is around 1.333. Since the light is coming from the air into the water, we can assume θ₁ (angle of incidence) to be 90 degrees, as it is perpendicular to the water's surface.
Using Snell's Law, we can calculate θ₂:
1.0003 * sin(90°) = 1.333 * sin(θ₂)
Simplifying the equation:
sin(θ₂) = (1.0003 / 1.333) * sin(90°)
sin(θ₂) ≈ 0.750
To find θ₂, we take the inverse sine (arcsine) of 0.750:
θ₂ ≈ arcsin(0.750)
θ₂ ≈ 48.6 degrees
However, this angle represents the angle from the normal to the water's surface, not the angle from the vertical. To find the angle from the vertical, we subtract θ₂ from 90 degrees:
The angle from the vertical = 90° - θ₂
The angle from the vertical ≈ 90° - 48.6°
The angle from the vertical ≈ 41.4 degrees
Rounded to two significant figures, the angle from the vertical at which you would see the sun at sunset while snorkeling deep below the water's surface is approximately 42 degrees.
When snorkeling deep below the water's surface and looking up at the sun during sunset, the sun would appear at an angle of approximately 42 degrees from the vertical. This angle takes into account the bending of light due to refraction as it passes from air to water.
To learn more about Angle, visit
https://brainly.com/question/13200721
#SPJ11
A tank is 6 m long, 4 m wide, 5 m high, and contains kerosene with density 820 kg/m3 to a depth of 4.5 m. (Use 9.8 m/s2 for the acceleration due to gravity.)
(a) Find the hydrostatic pressure on the bottom of the tank. ___ Pa
(b) Find the hydrostatic force on the bottom of the tank. ___ N
(c) Find the hydrostatic force on one end of the tank. ___ N
(a)The hydrostatic pressure on the bottom of the tank is 35,910 Pa
(b)The hydrostatic force on the bottom of the tank is 913,104 N
(c)The hydrostatic force on one end of the tank is 117.6 N
(a) Hydrostatic pressure on the bottom of the tank. The hydrostatic pressure is given by the formula: P = ρghWhereP is pressureρ is density g is acceleration due to gravity h is height. We are given: Length of the tank, l = 6 m Width of the tank, w = 4 m. Height of the tank, h = 5 m. Density of kerosene, ρ = 820 kg/m3Depth of kerosene, d = 4.5 m Acceleration due to gravity, g = 9.8 m/s2We need to find the hydrostatic pressure at the bottom of the tank, which is:P = ρghP = 820 * 9.8 * 4.5P = 35,910 Pa. Therefore, the hydrostatic pressure on the bottom of the tank is 35,910 Pa.
(b) Hydrostatic force on the bottom of the tank .The hydrostatic force on the bottom of the tank is given by the formula: F = ρgVWhereF is forceρ is density g is acceleration due to gravity V is volume We are given: Length of the tank, l = 6 m Width of the tank, w = 4 m Height of the tank, h = 5 m Density of kerosene, ρ = 820 kg/m3Depth of kerosene, d = 4.5 m Acceleration due to gravity, g = 9.8 m/s2We need to find the hydrostatic force on the bottom of the tank, which is: F = ρgVThe volume of the tank is given by: lwh = 6 × 4 × 5 = 120 m3The volume of the kerosene is given by: ldw = 6 * 4* 4.5 = 108 m3.The volume of the kerosene is less than the volume of the tank. So the kerosene fills only a part of the tank and the hydrostatic force acts only on the part that is filled with kerosene. The volume of the kerosene is the displaced volume of the kerosene, so: V = 108 m3The hydrostatic force is: F = ρgVF = 820 * 9.8 * 108F = 913,104 N. Therefore, the hydrostatic force on the bottom of the tank is 913,104 N.
(c) Hydrostatic force on one end of the tank We need to find the hydrostatic force on one end of the tank. The end that has dimensions of 4 m x 5 m. Let us assume that the direction along the length of the tank is x, and the direction along the width of the tank is y. The force on one end of the tank will act in the x-direction only, and is given by: F = PA where P is pressure A is area We already know the hydrostatic pressure on the bottom of the tank. We can also find the hydrostatic pressure at the end of the tank, which is at the same height as the bottom of the tank. The depth of kerosene at this end of the tank is given by:4.5 - 5 = -0.5 m. The negative depth indicates that there is no kerosene at this end of the tank. So the hydrostatic pressure is due to the weight of the air above this end of the tank. The hydrostatic pressure at this end of the tank is given by: P = ρghP = 1.2 * 9.8 * 0.5P = 5.88 Pa. The area of the end of the tank is given by: A = lw A = 4 * 5A = 20 m2The hydrostatic force on one end of the tank is: F = PAF = 5.88 * 20F = 117.6 N. Therefore, the hydrostatic force on one end of the tank is 117.6 N.
learn more about hydrostatic pressure Refer: https://brainly.com/question/32200319
#SPJ11
a certain child's near point is 11.0 cm; her far point (with eyes relaxed) is 133 cm. each eye lens is 2.00 cm from the retina. (a) Between what limits, measured in diopters, does the power of this lens–cornea combination vary? lower bound
The lower bound of the power of the lens-cornea combination is 11.0 diopters.
What is lower bound of the power?
The lower bound of the power refers to the minimum value or limit of the power of a lens or lens-cornea combination. In the context of vision correction, the lower bound of the power represents the minimum power required to correct a specific visual condition.
The power of a lens is given by the formula:
Power (P) = 1 / focal length (f)
We can calculate the focal length using the formula:
f = 1 / (near point distance)
Given:
Near point distance = 11.0 cm
Substituting this value into the formula for focal length:
f = 1 / 11.0 cm
f ≈ 0.0909 cm⁻¹
Now, we can calculate the power using the formula for power:
P = 1 / f
P = 1 / 0.0909 cm⁻¹
P =11.0 diopters
Therefore, the lower bound of the power of the lens-cornea combination is 11.0 diopters.
To learn more about lower bound of the power,
https://brainly.com/question/16610860
#SPJ4
Indicate the direction of the magnetic force. A positive charge travels to the right of the page through a magnetic field that points into the page. Which way does the magnetic force point?
A. Up along the page
B. Down along the page
C. Left
D. Right
PLS HELP ㅠㅠ
Explanation:
A. Up along the page
Using the law of the right hand