Acid HX has a very large Ka. How will the relative amounts of H+ and HX
compare at equilibrium?
A)The concentration of H+ will be larger than HX
B)The concentration of HX will be larger than H+
C)The concentration of HX will be equal to H+

Answer:

A

Explanation:

Answer:

Most solar cells are made from silicon—the same semiconductor material that is at the heart of computers. The cells are expensive to produce because it takes a great deal of energy to purify the silicon.

Answer: FALSE

Tides and Water Levels

Gravity is one major force that creates tides. In 1687, Sir Isaac Newton explained that ocean tides result from the gravitational attraction of the sun and moon on the oceans of the earth (Sumich, J.L., 1996). ... Our sun is 27 million times larger than our moon.

HOPE THIS HELPS

Answer:

I guess quantitative data is countable or measurable, relating to numbers; qualitative data is descriptive, relating to words. Quantitative data lends itself to statistical analysis; qualitative data is grouped and categorized according to themes.

Explanation:

Answer:

quantitative - actual numbers as data

Qualitative- uses senses (taste, touch, etc.)

Explanation:

Answer:

it could harbor dangerous chemicals that damage the car if released

it could be holding parts together

it could have something dangerous inside

Answer:

1 1

5 2

6 1

8 3

10 3

6 3

9 3

13 3

Explanation:

First of you add the subscripts (the little numbers after the letters) and multiply the big numbers before the letters together to get the number of atoms

For Example:

O= 1 atom

Si{2}= 2 atoms

Mg{5}C{6}= 11 atoms

3Na{2}= 6 atoms

O(SiNa){2}= OSi{2}Na{2}= 5 atoms

Each Capital letter is a new Element

For Example:

O = 1 Element

NaSi = 2 Elements

Answer:

Strong acids have mostly ions in solution, therefore the bonds holding H and A together must be weak. Strong acids easily break apart into ions. Weak acids exist mostly as molecules with only a few ions in solution, therefore the bonds holding H and A together must be strong

Answer:

Bond Strength

Explanation:

Strong acids have mostly ions in solution, therefore the bonds holding H and A together must be weak. Strong acids easily break apart into ions. Weak acids exist mostly as molecules with only a few ions in solution, therefore the bonds holding H and A together must be strong.Aug 15, 2020

Answer:

Light demonstrates wave-like and particle-like characteristics

Explanation:

Light itself is a wave but under circumstance it will present particle-like charcteristics. This is called wave-particle duality :)

Answer:

The molarity of the solution is 0.335 [tex]\frac{moles}{liter}[/tex]

Explanation:

Molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic, or atomic species.

Molarity is the number of moles of solute that are dissolved in a certain volume and is calculated by:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

Being the molar mass of BaBr2 equal to 297.14 g/mole, that is to say that 1 mole contains 297.14 grams, the mass of 198 grams are contained in:

[tex]198 grams*\frac{1 mole}{297.14 grams} = 0.67 moles[/tex]

So:

Replacing in the definition of molarity:

[tex]Molarity=\frac{0.67 moles}{2 L}[/tex]

Solving:  

Molarity= 0.335 [tex]\frac{moles}{liter}[/tex]

The molarity of the solution is 0.335 [tex]\frac{moles}{liter}[/tex]

[tex] \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \red{ \underline{ \large \orange{\tt{ ꧁ A \: N\: S \: W \: E \: R ꧂}}}}[/tex]

✧ [tex] \large{ \red{\tt{E\:X \: O \: T \: H \: E \: R \: M \: I \: C \: \: R \: E \: A \: C \: T\: I \: O \: N}} : }[/tex]

☃ The chemical reaction in which heat is released to the surroundings is called exothermic reaction. The amount of heat energy released is written along with products. This indicates that heat is given out.

[tex] \pink{ \text{Any \: two \: balanced \: equation \: for \: Exothermic \: changes}} : [/tex]

ツ Hope I helped! ♡

☂ Have a wonderful day / night ! ☄

[tex] \underbrace{ \overbrace{ \mathfrak{Carry \: On \: Learning}}}[/tex] ✎

▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁

Answer:

2 electrons

Explanation:

The first principal energy level contains only an s sublevel; therefore, it can hold a maximum of two electrons.

Answer:

1st Diagram (at the left) → Mid-Atlantic Ridge

2nd Diagram (at the right) → Andes Mountains

3rd Diagram (below) → San Andreas Fault

Explanation:

I have been able to label the diagram with the correct information.

The 1st diagram at the left is the Mid-Atlantic Ridge. This is a divergent plate boundary that is found at the floor of the Atlantic Ocean. It is also seen as part of the mountain range in the world. The Mid-Atlantic Ridge also includes a deep rift valley. This rift valley runs along the axis of the ridge. This is along nearly its entire length.

The Andes Mountains is found along the Pacific Ring of Fire. It is seen in a Mesozoic–Tertiary orogenic belt of mountains. The Andes rises due to the compression of the western rim of the South American Plate. It is a result of tectonic plate processes.

San Andreas Fault is known to form the tectonic boundary which exists between the Pacific Plate and the North American Plate. The motion of the fault is right-lateral strike-slip. It divides into three segments.

Answer:

i think it's c

Explanation:

Answer:

Venus and Mars?

Explanation:

Answer: C. None of these

Explanation: Krypton is a noble gas, on the right side of the period table, making it a non-metal.

Answer:

2, 2

Explanation

Answer:

2.70 M.  

Explanation:

Molar mass of MgO = 24.3 + 16 = 40.3.

A molar solution will contain 40.3g in 1 Litre.

So 800 mL of 1 molar solution will contain 0.8* 40.3 g MgO.

So the molarity of the given solution

= 87 / (0.8*40.3)

= 2.699 M.

Answer: a double replacement

Explanation:

Answer:

a

Explanation:

becsaus

Answer:

–99 °C

Explanation:

From the question given above, the following data were obtained:

Initial pressure (P₁) = 1.5 atm

Initial temperature (T₁) = 25 °C

Final pressure (P₂) = 1 atm

Change in temperature (ΔT) =?

Next, we shall determine the final temperature. This can be obtained as follow:

Initial pressure (P₁) = 1.5 atm

Initial temperature (T₁) = 25 °C + 273 = 298 K

Final pressure (P₂) = 1 atm

Final temperature (T₂) =?

P₁/T₁ = P₂/T₂

1.5 / 298 = 1 / T₂

Cross multiply

1.5 × T₂ = 298

Divide both side by 1.5

T₂ = 298 / 1.5

T₂ = 199 K

Converting 199 K to °C, we have:

T(°C) = T(K) – 273

T₂ = 199 – 173

T₂ = –74 °C

Finally, we shall determine change in temperature. This can be obtained:

Initial temperature (T₁) = 25 °C

Final temperature (T₂) = –74 °C

Change in temperature (ΔT) =?

ΔT = T₂ – T₁

ΔT = –74 – 25

ΔT = –99 °C

Thus, the change in the temperature is –99 °C

Answer:

pOH = 1.3, pH = 12.7

Explanation:

Since NaOH is a strong base, it will completely ionize; further, since it completely ionizes, our hydroxide concentration (a product of the ionization) will be the same as the given concentration of NaOH.

NaOH -> Na⁺ + OH⁻, [OH⁻] = 5.0 x 10^-2 M

pOH is the negative log of the hydroxide concentration, so plug our hydroxide concentration in:

pOH = -log[OH⁻] = -log[5.0 x 10^-2 M] = 1.3

Since pH + pOH = 14, we can plug in pOH and solve for pH:

pH + 1.3 = 14

pH = 14 - 1.3 = 12.7

Thus, our pOH = 1.3 and pH = 12.7.

Answer:

75% will have long legs and 25% will have short legs

Explanation:

Answer:

The correct answer is - B) gaining electrons will fill their octet faster than losing them.

Explanation:

Halogens are located in the 17 th group in the periodic table and have elements like fluorine, chlorine bromine and others. All these elements are nonmetals and have similar electron numbers in their octet.

That is the reason of their high effective nuclear charge as they are electronegative and therefore readily get electrons to become anion with other elemnts in chemical reaction. These elements make anion formed when a nonmetal atom gains one or more electrons.

Answer:

320 grams of sulfur trioxide are required to produce 4.00 mol of sulfuric acid.

Explanation:

The balanced reaction is:

SO₃ + H₂O → H₂SO₄

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Being the molar mass of each compound:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Then you can apply the following rule of three: if 1 mole of sulfuric acid is produced by the reaction of 80 grams of sulfur trioxide, 4 moles of sulfuric acid is produced from how much mass of sulfur trioxide?

[tex]mass of sulfur trioxide= \frac{4 moles of sulfuric acid* 80 grams of sulfur trioxide}{1 mole of sulfuric acid }[/tex]

mass of sulfur trioxide= 320 grams

320 grams of sulfur trioxide are required to produce 4.00 mol of sulfuric acid.

The mass of the required compound is 320 grams

Given the chemical equation expressed as:

[tex]SO_3 + H_2O \rightarrow H_2SO_4[/tex]

According to stochiometry, 1 mole of SO3  produces 1 mole of H2SO4, hence the moles of SO3 will also be 4.00moles

Determine the mass of SO3

Mass = mole * molar mass

Mass = 4.0 * [32+3(16)]

Mass = 4.0 * 80

Mass = 320 grams

The mass of the required compound is 320 grams

Learn more on stoichiometry here:  https://brainly.com/question/16060223

i find the answer in (Limiting Reactants and Excess ws_KEY.pdf)  

make a search for it it's the first link

According to stoichiometry and balanced chemical equation, 6.18 moles of hydrogen are formed and HBr is the limiting reactant.

Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is used in balancing chemical equations.

In the given chemical reaction,when 3.22 moles of Al reacts with 4.96 moles of HBr₃ total of 3.22+4.96= 8.18 moles are formed.Out of which according to reaction of  which 6 moles are of hydrogen so thus,to find moles of hydrogen formed 8.18-2=6.18 moles of hydrogen are formed.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ2

Answer:

???

Explanation:

Answer: i think it is Habitat but i am not 100%

Explanation:

Answer:

To calculate the pH of an aqueous solution you need to know the concentration of the hydronium ion in moles per liter (molarity). The pH is then calculated using the expression: pH = - log [H3O+].

Example: Find the pH of a 0.0025 M HCl solution.

Answer:

california

Explanation: