The creation of sulphur di-oxide and consumption of oxygen as well as the formation of Sulfur trioxideall contribute to the change in pressure. To calculate the moles of Sulfur trioxide produced, further data is therefore required.
What is the process through which SO2 and O2 react?Heat is produced when sulphur di-oxideis converted to Sulfur trioxide in an exothermic reaction. Vanadium pentoxide Vanadium Oxideserves as a catalyst for the reaction. Sulphur trioxide is then dissolved in a 94% solution of Sulfuric acid to produce oleum, commonly known as fuming sulfuric acid (Disulfuric acid ).
What happens when SO2 and SO3 react as a catalyst?A crucial stage in the synthesis of sulfuric acid is the catalytic oxidation of sulphur di-oxideto Sulfur trioxide. It generates the Sulfur trioxide needed to make Sulfuric acid(l) later. Oxidation of sulphur di-oxide+0.5oxygen to Sulfur trioxide is always carried out by circulating warm sulphur di-oxide-bearing gas across horizontal catalyst beds made of Vanadium, pottasium , sodium , cesium , sulphur , oxygen, and silicon di-oxide.
To know more about Sulfur visit:-
https://brainly.com/question/31142164
#SPJ1
What is the formula of a compound formed by the ions M-1 and X+3 ?a. MX3b. M3Xc. M3X3d. MX6e. None of the above
The formula for a compound formed by the ions M-1 and X+3 is MX3.
The formula of a compound formed by the ions M-1 and X+3 can be determined using the crisscross method. This method involves taking the absolute value of the charge of each ion and using it as a subscript for the other ion. In this case, the absolute value of the charge of M-1 is 1 and the absolute value of the charge of X+3 is 3. Thus, the formula for the compound would be M1X3 or simply MX3. It is important to note that the other options provided in the question, such as M3X, M3X3, and MX6, are not correct based on the charges of the ions given. It is essential to use the crisscross method to determine the correct formula of a compound formed by ions with different charges.
Know more about Charge here:
https://brainly.com/question/17464878
#SPJ11
1. calculate dh for the reaction of calcium oxide and sulfur trioxide. Is this reaction exothermic or endothermic? CaO(s) + SO3(g) = CaSO4(s)
Use the following equations and data.
H2O (l) + SO3 (g) = H2SO4 (l) delta H = -132.5 kj/mol
H2SO4 (l) + Ca (s) + CaSO4(s) + H2 (g) delta h = -602.5 kj/mol
Ca(s) + 1/2 O2 (g) = CaO(s) delta h = -634.9 kj/mol
H2 (g) + 1/2 O2 (g) = H2O (l) delta h = -258.8 jk/mol
The proper reaction formula is CaO (s) + H₂O (l) Ca(OH)₂ (aq). G = Go + RT ln KcR can be used to compute the value of G. By heating calcium oxide (lime) with carbon (charcoal), calcium carbide (CaC₂) can be produced.
CaO(s) plus 3C(s) plus CaC₂(s) plus CO₂(g) = +464.8 kJ. The higher a substance's energetic stability, the lower its heat of production. The heat of formation for ethanol in the given example is -277.6 kJ/mol, the lowest value of any substance in the table.The pollutant sulphur trioxide and calcium oxide react to form calcium oxide (CaO(s) + SO₃(g) CaSO₄(s); G° = -345 kJ/mol),
To know more about calcium carbide, click here:
https://brainly.com/question/1581618
#SPJ4
Arrange each set in order of decreasing atomic size. (Use the appropriate <, =, or > symbol to separate substances in the list.)
(a) Ge, Pb, and Sn
(b) Be, Mg, and Na
(c) Cl, K, and S
(d) C, O, and Be
The decreasing atomic size is in the order (a) Pb > Sn > Ge, (b) Na > Mg > Be, (c) K >S > Cl, (d) Be > C > O.
(a) Pb > Sn > Ge
Reason: This is because the atomic size generally decreases from top to bottom within a group in the periodic table.
(b) Na > Mg > Be
Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table.
(c) K > Cl > S
(d) Be > C > O
Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table. Be (beryllium) has the largest atomic size among the three elements because it is located towards the left side of the period, while C (carbon) has a slightly smaller atomic size, and O (oxygen) has the smallest atomic size as it is located towards the right side of the period.
To know more about Atomic Size:
https://brainly.com/question/14656441
#SPJ11
The decreasing atomic size is in the order (a) Pb > Sn > Ge, (b) Na > Mg > Be, (c) K >S > Cl, (d) Be > C > O.
(a) Pb > Sn > Ge
Reason: This is because the atomic size generally decreases from top to bottom within a group in the periodic table.
(b) Na > Mg > Be
Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table.
(c) K > Cl > S
(d) Be > C > O
Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table. Be (beryllium) has the largest atomic size among the three elements because it is located towards the left side of the period, while C (carbon) has a slightly smaller atomic size, and O (oxygen) has the smallest atomic size as it is located towards the right side of the period.
To know more about Atomic Size:
https://brainly.com/question/14656441
#SPJ11
Account for the effects of NH_3(aq) and HCI(aq) on the CuSO_4 or NiCl_2 solution. Use equations 16.2-5 in your explanation Metal-Ammonia Ions. Aqueous solutions of copper ions and nickel ions appear sky blue and green, respectively. The colors of the solutions change, however, in the presence of added ammonia. NH_3. Because the metal-ammonia bond is stronger than the metal-water bond, ammonia substitution occurs and the following equilibria shift right, forming the metal-ammonia complex ions:^1 Addition of strong acid, H^+ affects these equilibria by its reaction with ammonia (a base) on the left side of the equations: The ammonia being removed from the equilibria causes the reactions to shift left to relieve the stress caused by the removal of the ammonia, re-forming the aqueous Cu (sky blue) and Nr^2+ (green) solutions. For copper ions, this equilibrium shift may be represented as
When NH3(aq) is added to CuSO4 or NiCl2 solutions, the metal-ammonia bond is stronger than the metal-water bond, causing ammonia substitution and forming metal-ammonia complex ions. The equilibrium shifts right due to this stronger bond.
For example:
Cu²⁺(aq) + 4NH3(aq) ⇌ [Cu(NH3)4]²⁺(aq) (deep blue)
Ni²⁺(aq) + 6NH3(aq) ⇌ [Ni(NH3)6]²⁺(aq) (violet)
When a strong acid like HCl(aq) is added, it reacts with ammonia (a base) present in the solution, removing ammonia from the equilibrium:
NH3(aq) + H⁺(aq) → NH4⁺(aq)
This causes the equilibrium to shift left, reforming the original aqueous Cu²⁺(sky blue) and Ni²⁺(green) solutions. This is because the removal of ammonia relieves the stress caused by the reaction between ammonia and the strong acid.
When CuSO_4 or NiCl_2 is dissolved in water, the resulting solution is sky blue or green in colour, respectively, due to the presence of Cu^2+ or Ni^2+ ions in an aqueous solution. However, when NH_3(aq) is added to the solution, the metal-ammonia bond is stronger than the metal-water bond, leading to ammonia substitution and the formation of metal-ammonia complex ions:
Cu^2+ + 4NH_3 ⇌ [Cu(NH_3)_4]^2+
Ni^2+ + 6NH_3 ⇌ [Ni(NH_3)_6]^2+
The addition of HCl(aq) affects these equilibria by reacting with the ammonia (a base) on the left side of the equations, removing ammonia from the equilibria and causing the reactions to shift left to relieve the stress caused by the removal of ammonia.
As a result, the metal-ammonia complex ions dissociate and reform the aqueous Cu^2+ and Ni^2+ solutions. This can be represented by the following equation for Cu^2+:
[Cu(NH_3)_4]^2+ + 4H^+ ⇌ Cu^2+ + 4NH_4^+
Overall, the effects of NH_3(aq) and HCl(aq) on the CuSO_4 or NiCl_2 solution can be explained by the metal-ammonia complex ion formation and the subsequent dissociation caused by the addition of H^+ ions.
Learn more about metal ammonia here: brainly.com/question/23717672
#SPJ11
Use the following steps to determine how to make 600 mL of a 0.1M acetate buffer, pH 5.0, using 0.1M acetic acid and 0.1M sodium acetate. Using the desired pH(5.0) and pKa of acetic acid, use the Henderson-Hasselbalch equation to determine a ratio of [base]/[acid] required for this buffer.
To make 600 mL of a 0.1M acetate buffer, pH 5.0, using 0.1M acetic acid and 0.1M sodium acetate, follow these steps.
Determine the pH and pKa of acetic acid. The pH is given as 5.0 and the pKa of acetic acid is 4.76.
Use the Henderson-Hasselbalch equation to determine the ratio of [base]/[acid] required for this buffer. The equation is pH = pKa + log([base]/[acid]). Rearranging the equation, [base]/[acid] = 10^(pH-pKa). Plugging in the values, [base]/[acid]
= [tex]10^{(5.0-4.76)[/tex]
= 1.74.
Calculate the amount of acetic acid and sodium acetate needed to make 600 mL of 0.1M acetate buffer with a [base]/[acid] ratio of 1.74. Let x be the amount of acetic acid needed in mL and y be the amount of sodium acetate needed in mL. The total volume is x + y = 600 mL. The total moles of acid and base are 0.1x and 0.1y, respectively. The ratio of [base]/[acid] is y/x = 1.74. Solving these equations simultaneously, we get x = 262.5 mL and
y = 337.5 mL.
Measure out 262.5 mL of 0.1M acetic acid and 337.5 mL of 0.1M sodium acetate and mix them together to make 600 mL of 0.1M acetate buffer, pH 5.0, with a [base]/[acid] ratio of 1.74.
Learn more about Henderson-Hasselbalch Visit: brainly.com/question/13423434
#SPJ4
) draw the structures of the two possible dipeptides that can be formed by combining valine and phenylalanine.
The structures of the two possible dipeptides that can be formed by combining valine and phenylalanine is attached.
What is structure?Structure is the arrangement and organization of elements within a system. It can refer to the physical arrangement of components, the hierarchical ordering of tasks, the way information is organized, or the pattern of relationships between different parts. Structures are essential components of all systems, whether physical, biological, or social. They provide a way to define the order and manner of how a system works, and how it interacts with the environment. Structures also can serve to facilitate communication between different parts of a system and can be used to identify potential areas for improvement. Structure is a key concept in the fields of engineering, architecture, and computer science.
To learn more about structure
https://brainly.com/question/20300458
#SPJ1
5.039 e-3 M solution of calcium hydroxide
study this chemical reaction: cr 2i2 cri4 then, write balanced half-reactions describing the xidation and reduction that happen in this reaction.
The balanced half-reactions for this chemical reaction are: - Oxidation: Cr → Cr^+4 + 4e^-
- Reduction: 2I2 + 4e^- → 4I^-
This chemical reaction. The given reaction is Cr + 2I2 → CrI4. To write the balanced half-reactions for oxidation and reduction, follow these steps:
1. Identify the oxidation states of the elements in the reactants and products:
- Cr: 0 (in its elemental form)
- I2: 0 (in its elemental form)
- CrI4: Cr has an oxidation state of +4, and each I has an oxidation state of -1.
2. Determine which element is oxidized and which is reduced:
- Cr goes from 0 to +4, so it's being oxidized.
- I2 goes from 0 to -1, so it's being reduced.
3. Write the unbalanced half-reactions for oxidation and reduction:
- Oxidation: Cr → Cr^+4 + 4e^-
- Reduction: 2I2 + 4e^- → 4I^-
4. Balance the half-reactions:
- Oxidation is already balanced: Cr → Cr^+4 + 4e^-
- Reduction is also balanced: 2I2 + 4e^- → 4I^-
So, the balanced half-reactions for this chemical reaction are:
- Oxidation: Cr → Cr^+4 + 4e^-
- Reduction: 2I2 + 4e^- → 4I^-
to learn more about chemical reaction click here:
https://brainly.com/question/7341531
#SPJ11
Calculate the theoretical yield for the bromination of both stilbenes and cinnamic acid, assuming the presence of excess pyridinium tribromide.
cinnamic acid - 150 mg
cis-stilbene - 100 μL
trans-stilbene - 100 mg
pyridinium tribromide - 200-385 mg
The theoretical yield for the bromination of cinnamic acid, cis-stilbene, and trans-stilbene, with excess pyridinium tribromide, is as follows: cinnamic acid - 237 mg; cis-stilbene - 215 μL; trans-stilbene - 257 mg.
1. Calculate moles of each reactant:
- Cinnamic acid (150 mg) / (148 g/mol) = 1.01 x 10⁻³ mol
- cis-Stilbene (100 μL) / (0.908 g/mL * 180 g/mol) = 6.15 x 10⁻⁴ mol
- trans-Stilbene (100 mg) / (180 g/mol) = 5.56 x 10⁻⁴ mol
2. Calculate theoretical yield (assuming 1:1 stoichiometry):
- Cinnamic acid: 1.01 x 10⁻³ mol * (296 g/mol) = 0.237 g (237 mg)
- cis-Stilbene: 6.15 x 10⁻⁴ mol * (0.908 g/mL * 430 g/mol) = 0.215 mL (215 μL)
- trans-Stilbene: 5.56 x 10⁻⁴ mol * (361 g/mol) = 0.257 g (257 mg)
These calculations assume the presence of excess pyridinium tribromide, meaning the limiting reagent is the starting material.
To know more about theoretical yield click on below link:
https://brainly.com/question/14966377#
#SPJ11
if this reaction releases 235 kj of energy, how many grams of fe form?Show the conversions required to solve this problem. 2 Al(s) + Fe, 0,($) — 2 Fe(s) + A1,O,(8) AH = -852 kJ -217 kJ x X 8 Fe Answer
14.4 grams of Fe will form when 235 kJ of energy is released in this reaction.
To solve this problem, we need to use the given reaction and its enthalpy change to find the amount of Fe formed when 235 kJ of energy is released.
First, we need to balance the equation:
2 Al(s) + 3 Fe2O3(s) -> 3 Fe(s) + 2 Al2O3(s)
We can see that for every 3 moles of Fe2O3, we get 3 moles of Fe. So, we need to convert the energy released (235 kJ) to moles of Fe2O3:
-852 kJ = -3 moles of Fe2O3
1 kJ = 3/(-852) moles of Fe2O3
235 kJ = 3/(-852) x 235 moles of Fe2O3
235 kJ = -0.773 moles of Fe2O3
Now, we can use stoichiometry to find the amount of Fe formed:
3 moles of Fe -> 1 mole of Fe2O3
1 mole of Fe -> 1/3 mole of Fe2O3
Therefore,
1/3 mole of Fe2O3 = 0.773 moles of Fe2O3
0.773 moles of Fe2O3 x (1 mole of Fe/3 moles of Fe2O3) = 0.258 moles of Fe
Finally, we can use the molar mass of Fe to convert moles to grams:
0.258 moles of Fe x 55.85 g/mol = 14.4 grams of Fe
To know more about enthalpy change refer to
https://brainly.com/question/14047927
#SPJ11
which one of the following pairs contains isoelectronic species? group of answer choices na , o2– na, na s, se se2-, s2- f2, cl2
The pair that contains isoelectronic species is: [tex]Se^{2-[/tex] and [tex]S^{2-[/tex]. This is because both species have the same number of electrons.
Sulfur ion ([tex]S^{2-[/tex]) has gained two electrons compared to the neutral sulfur atom, which has 16 electrons. Therefore, [tex]S^{2-[/tex] has a total of 18 electrons. Similarly, selenium ion ([tex]Se^{2-[/tex]) has gained two electrons compared to the neutral selenium atom, which has 34 electrons. Therefore, [tex]Se^{2-[/tex] also has a total of 18 electrons. Thus, [tex]Se^{2-[/tex]- and [tex]S^{2-[/tex] are isoelectronic because they have the same number of electrons, even though they are different elements and ions. The pair that contains isoelectronic species is: [tex]Se^{2-[/tex] and [tex]S^{2-[/tex]. This is because both species have the same number of electrons.
Learn more about isoelectronic :
https://brainly.com/question/6807313
#SPJ11
The pair that contains isoelectronic species is: [tex]Se^{2-[/tex] and [tex]S^{2-[/tex]. This is because both species have the same number of electrons.
Sulfur ion ([tex]S^{2-[/tex]) has gained two electrons compared to the neutral sulfur atom, which has 16 electrons. Therefore, [tex]S^{2-[/tex] has a total of 18 electrons. Similarly, selenium ion ([tex]Se^{2-[/tex]) has gained two electrons compared to the neutral selenium atom, which has 34 electrons. Therefore, [tex]Se^{2-[/tex] also has a total of 18 electrons. Thus, [tex]Se^{2-[/tex]- and [tex]S^{2-[/tex] are isoelectronic because they have the same number of electrons, even though they are different elements and ions. The pair that contains isoelectronic species is: [tex]Se^{2-[/tex] and [tex]S^{2-[/tex]. This is because both species have the same number of electrons.
Learn more about isoelectronic :
https://brainly.com/question/6807313
#SPJ11
The principle that allows the enthalpy of a reaction to be determined indirectly from several steps is called - Law of Dulong and Petit - Hess' law - Henry's law
- Avogadro's law
The principle that allows the enthalpy of a reaction to be determined indirectly from several steps is called Hess' law.
Hess's law is a principle in thermodynamics that states that the enthalpy change of a chemical reaction is independent of the pathway between the initial and final states. This means that the total enthalpy change of a reaction can be calculated by adding the enthalpy changes of a series of intermediate reactions that connect the initial and final states, even if these intermediate reactions are not the actual steps of the reaction. Hess's law is based on the fact that enthalpy is a state function, which means that its value depends only on the initial and final states of a system, and not on the process by which the system reached those states. By using a series of intermediate reactions, it is possible to construct a path between the initial and final states that is easier to measure experimentally, and from which the enthalpy change of the overall reaction can be calculated indirectly.
Learn more about enthalpy :
https://brainly.com/question/16720480
#SPJ11
In the study of enzymes, a sigmoidal plot of substrate concentration(S) versus the reaction velocity(V) indicates
In the study of enzymes, a sigmoidal plot of substrate concentration (S) versus the reaction velocity (V) indicates that the enzyme exhibits cooperative binding of the substrate.
This means that as the substrate concentration increases, the enzyme undergoes a conformational change that enhances its catalytic activity, leading to an increase in reaction velocity. This behavior is characterized by a slow initial phase, followed by a rapid increase in reaction velocity.
And finally a plateau phase where the reaction velocity reaches its maximum. The sigmoidal plot is also known as the Michaelis-Menten curve and is used to determine the kinetic parameters of enzyme-catalyzed reactions.
To know more about concentration click here
brainly.com/question/29276511
#SPJ11
If a molecule of pyruvate was labeled on the carboxyl carbon with 14C and used to make each of the five products discussed in the fates of pyruvate, where would the label be found in each product?A. In alanine, the 14C label would be:attached to the amine group.at the Cα position on the amino acid.at the carboxyl group.B. For conversion to acetyl-CoA, the 14C label would be:lost as CO2.attached to the carbonyl group.at the methyl position.For conversion to lactate, the 14C label would be:attached to the alcohol group.at the carboxyl group.at the methyl position.For conversion to oxaloacetate, the 14C label would be:at the methylene position at carbon-3.at the carbonyl position at carbon-2.at the carboxyl group at carbon-1.at the carboxyl group at carbon-4.
B. For conversion to acetyl-CoA, the 14C label would be: lost as CO₂.
For conversion to lactate, the 14C label would be: attached to the methyl position.
For conversion to oxaloacetate, the 14C label would be: at the carboxyl group at carbon-1.
In alanine, the 14C label would be: at the Cα position on the amino acid.
Pyruvate is a three-carbon molecule that can undergo different metabolic fates, depending on the cellular conditions and the energy needs of the organism. The five products mentioned in the question are examples of these fates: acetyl-CoA, lactate, oxaloacetate, alanine, and carbon dioxide.
If a molecule of pyruvate is labeled on the carboxyl carbon with 14C, the position of the label in the different products can be traced based on the chemical transformations that occur.
For conversion to acetyl-CoA, pyruvate undergoes oxidative decarboxylation, which involves the removal of a carboxyl group as carbon dioxide. Therefore, the 14C label would be lost as CO2, and no radioactivity would be found in the acetyl-CoA molecule.
For conversion to lactate, pyruvate is reduced by NADH to form lactate. The 14C label would be found in the methyl position of the lactate molecule, which corresponds to the position of the carboxyl carbon in pyruvate.
For conversion to oxaloacetate, pyruvate is carboxylated by biotin-dependent pyruvate carboxylase to form oxaloacetate. The 14C label would be found in the carboxyl group at carbon-1 of the oxaloacetate molecule.
In alanine, pyruvate is transaminated by the enzyme alanine transaminase to form alanine. The 14C label would be found at the Cα position on the amino acid, which corresponds to the position of the carboxyl carbon in pyruvate.
Learn more about oxaloacetate
https://brainly.com/question/25735714
#SPJ4
calculate the ph during the titration of 20.00 ml of 0.1000 m morphine(aq) with 0.2000 m hcl(aq) after 5.55 ml of the acid have been added. kb of morphine = 1.6 x 10-6
To calculate the pH during the titration, we need to determine the moles of morphine and HCl present at each point of the titration. the pH of the solution after 5.55 mL of HCl have been added is approximately 2.064.
Initial moles of morphine = (20.00 mL)(0.1000 mol/L) = 0.00200 mol
At 5.55 mL of HCl added, the moles of HCl = (5.55 mL)(0.2000 mol/L) = 0.00111 mol
To determine the moles of morphine left, we need to use the stoichiometry of the reaction between morphine and HCl. From the balanced equation:
Morphine(aq) + HCl(aq) → MorphineHCl(aq)
1 mol + 1 mol → 1 mol
Therefore, the moles of morphine remaining after 5.55 mL of HCl have been added is:
0.00200 mol - 0.00111 mol = 0.00089 mol
Now we can calculate the concentration of morphine at this point:
[[tex]H^{-}[/tex]] = sqrt(Kb * [morphine]) = sqrt(1.6E-6 * 0.00089) = 1.03E-4 M
The HCl has reacted with some of the morphine to form morphine hydrochloride, which is a strong acid. So the pH of the solution will be determined by the excess HCl present.
The moles of excess HCl is:
0.00111 mol - 0.00089 mol = 0.00022 mol
The total volume of the solution is:
20.00 mL + 5.55 mL = 25.55 mL = 0.02555 L
The concentration of excess HCl is:
0.00022 mol / 0.02555 L = 0.0086 M
The pH can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([[tex]A^{-}[/tex]]/[HA])
In this case, the acid is HCl and its pKa is -log(1.0) = 0, so the equation simplifies to:
pH = -log([[tex]H^{+}[/tex]]) = -log(0.0086) = 2.064
Therefore, the pH of the solution after 5.55 mL of HCl have been added is approximately 2.064.
Learn more about pH during
https://brainly.com/question/29786836
#SPJ4
calculate the ph of a solution that is 0.366 m nh2nh2 and 0.236 m nh2nh3cl. kb of nh2nh2 is 1.7 x 10-6.
The pH of the solution is 7.025. The pH serves as a gauge for a solution's acidity or basicity (alkalinity). A pH of 7 is regarded as neutral, while values below 7 are acidic and over 7 are basic (alkaline).
To calculate the pH of the solution containing 0.366 M NH2NH2 and 0.236 M NH2NH3Cl, we need to first find the concentration of OH- ions. We will use the Kb expression and an ICE table for the reaction:
NH2NH2 + H2O ⇌ NH2NH3+ + OH-
Kb = [NH2NH3+][OH-] / [NH2NH2]
Initial concentrations:
[NH2NH2] = 0.366 M
[NH2NH3+] = 0.236 M (from NH2NH3Cl)
[OH-] = 0 M
Change in concentrations:
[NH2NH2] = -x
[NH2NH3+] = +x
[OH-] = +x
Equilibrium concentrations:
[NH2NH2] = 0.366 - x
[NH2NH3+] = 0.236 + x
[OH-] = x
Now we can plug the values into the Kb expression:
1.7 x 10^-6 = (x)(0.236 + x) / (0.366 - x)
Solve for x, which represents the concentration of OH- ions. After finding x, use the following equation to find the pOH:
pOH = -log10([OH-])
Finally, calculate the pH using the relationship:
pH = 14 - pOH
Learn more about The pH here:
https://brainly.com/question/31357379
#SPJ11
the reaction in which adp is converted to atp with need of 7.3 kcal is a reaction
The reaction in which ADP is converted to ATP with a need of 7.3 kcal is an endergonic reaction. An endergonic reaction is a reaction that requires energy to proceed,
as opposed to an exergonic reaction, which releases energy. In this case, the conversion of ADP to ATP requires energy input, specifically 7.3 kcal per mole of reaction. This energy input comes The reaction in which ADP is converted to ATP with a need of 7.3 kcal is an endergonic reaction from an exergonic reaction such as the breakdown of glucose during cellular respiration.
Learn more about ADP here:
https://brainly.com/question/30970677
#SPJ11
Which is more likely to appear, carbon dioxide, carbon monoxide or diatomic oxygen
Diatomic oxygen (O₂) is more likely to appear than carbon dioxide (CO₂) or carbon monoxide (CO).
This is because diatomic oxygen is a highly abundant molecule in Earth's atmosphere, making up about 21% of the air we breathe. In contrast, carbon dioxide and carbon monoxide are present in much lower concentrations, with carbon dioxide making up only about 0.04% of the atmosphere and carbon monoxide being present in trace amounts.
Additionally, diatomic oxygen is involved in many important biological and chemical processes, such as respiration and combustion, which further increases its likelihood of appearing. Carbon dioxide and carbon monoxide, on the other hand, are mostly produced as byproducts of certain chemical reactions or as a result of human activities such as burning fossil fuels or deforestation.
To know more about the Carbon monoxide, here
https://brainly.com/question/22530423
#SPJ4
Using the accepted values for delta H and S, calculate the Ksp of anhydrous CaSO4 at 5 degrees C
The Ksp (solubility product constant) of anhydrous CaSO4 at 5 degrees Celsius can be calculated using the thermodynamic equation ΔG = -RTlnK, where ΔG is the Gibbs free energy change,
R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant. The ΔH and ΔS values for the dissolution of anhydrous CaSO4 can be found in thermodynamic tables as -90.9 kJ/mol and 152.3 J/(mol·K), respectively. Plugging in these values and converting to Kelvin, we can calculate a Ksp of approximately 2.7 x 10^-5 mol^2/L^2 at 5 degrees Celsius. This value indicates the maximum concentration of dissolved CaSO4 that can be reached in a saturated solution at equilibrium under these conditions.
Learn more about CaSO4 here:
https://brainly.com/question/29482058
#SPJ11
1. Titrations are generally both more accurate and more precise the smaller the concentration of titrant you use. A 6.0 M NaOH stock solution is provided by the stock room. (a) What volumes of the stock NaOH solution and DI water would you need to prepare 500 mL of 0.10 M NaOH solution? (b) If you measured your diluted NaOH solution using a pH meter, what pH should it read?
Answer:
8.3 mL of NaOH Stock, 492 mL of DI Water. pH = 13.
Explanation:
Use the M1V1 = M2V2 formula, where m is molarity and v is volume. This can be done in mL or L, it will cancel out.
(6.0)V1 = (.10)(500), solving for V1 you get 8.3 mL of 6.0M NaOH stock solution. The remaining 500-8.3= approx 492 mL should be DI water.
The pH = -log[H+] but in this case we have OH-, so we will use pH + pOH =14. And rearrange to solve for pH = 14 + pOH = 14 + log[OH-]
Then solve
pH = 14 + log(0.10 M0 = 14 - 1 = 13
27. oxidation (kmno4 or ozone) of unsymmetrical internal alkynes produces two carboxylic acids whereas under the same condition terminal alkyne produces one carboxylic acid — explain.
The reason why oxidation (using KMnO4 or ozone) of unsymmetrical internal alkynes produces two carboxylic acids is because the unsymmetrical alkynes have two different groups attached to each end of the triple bond. During oxidation, the triple bond is broken and each end of the molecule is converted into a carboxylic acid.
Since the two ends of the unsymmetrical alkyne have different groups, two different carboxylic acids are produced. On the other hand, terminal alkynes have the same group attached to each end of the triple bond. When terminal alkynes undergo oxidation, only one carboxylic acid is produced because both ends of the molecule are the same.
The oxidation of unsymmetrical internal alkynes with reagents like KMnO4 or ozone results in the formation of two carboxylic acids because the alkyne has two distinct alkyl groups attached to the carbon-carbon triple bond. When the oxidizing agent breaks the triple bond, each carbon forms a carboxylic acid group, leading to two different carboxylic acids.
On the other hand, terminal alkynes have a hydrogen atom attached to one of the carbons in the carbon-carbon triple bond. When terminal alkynes undergo oxidation using KMnO4 or ozone, the hydrogen atom is replaced by a carboxylic acid group, while the other carbon in the triple bond forms a carboxylic acid. However, the carboxylic acid formed from the hydrogen side is a formic acid (HCOOH), which can be further oxidized to carbon dioxide and water. Therefore, under the same conditions, the oxidation of terminal alkynes ultimately produces only one carboxylic acid.
Learn more about alkynes here:
https://brainly.com/question/9620187
#SPJ11
We spent a lot of time studying Valsartan in Module A. Here it is again! Provide the configuration of the chiral center in Valsartan. (6 pts) Atrorvastatin is sold under the trade name Lipitor and is used for lowering cholesterol. Annual global sales of this compound exceed $13 billion. Assign a configuration to each chirality cente in atrovastin: (6 pts) A. The configuration of this cabon atom(B) is ___B. The configuration of this carbon atom (C) is ___
The chiral center in Valsartan has an (S) configuration. In Atorvastatin, the configuration of carbon atom B is (R), and the configuration of carbon atom C is (S).
A chiral center is an atom in a molecule that has four different substituents bonded to it, resulting in two non-superimposable mirror image structures known as enantiomers. Valsartan is a medication used to treat high blood pressure and heart failure that contains a single chiral center.
The chiral center in Valsartan is located at the carbon atom attached to the nitrogen in the tetrazole ring. This carbon has an (S) configuration, as determined by the Cahn-Ingold-Prelog priority rules.
Atorvastatin is a medication used to lower cholesterol levels and prevent cardiovascular disease. It contains two chiral centers, at carbon atoms B and C in the pyrrole and tert-butyl groups, respectively.
The configuration of carbon atom B is (R), while the configuration of carbon atom C is (S). This information can be determined using the same Cahn-Ingold-Prelog priority rules used to determine the configuration of the chiral center in Valsartan.
For more questions like Configuration click the link below:
https://brainly.com/question/1255220
#SPJ11
Using the table of enthalpies below, calculate ΔH° for the reaction: 2SO2(g) + O2(g) → 2SO3(g)
Reaction ΔH° (kJmol)
S(s) + O2(g) → SO2(g) -297 kj/mol
2S(s) + 3O2(g) → 2SO3(g) -792 kJ/mol
The enthalpy change, ΔH°, for the reaction 2SO2(g) + O2(g) → 2SO3(g) is -1386 kJ/mol.
How to calculate change in enthalpy of a reaction?To calculate the ΔH° for the reaction 2SO2(g) + O2(g) → 2SO3(g), we need to use Hess's Law which states that the enthalpy change of a reaction is independent of the pathway between the reactants and the products. Therefore, we can add the enthalpies of the two reactions below to obtain the ΔH° for the desired reaction:
2SO2(g) + O2(g) → 2SO3(g)
= 2[ S(s) + O2(g) → SO2(g) ] + [ 2S(s) + 3O2(g) → 2SO3(g) ]
= 2[-297 kJ/mol] + [-792 kJ/mol]
= -1386 kJ/mol
To know more about Enthalpy change:
https://brainly.com/question/19248192
#SPJ11
Construct the expression for Kb for the weak base, CIO. CIO"(aq) + H2O(1) = OH(aq) + HCIO(aq) 1 Based on the definition of Kb, drag the tiles to construct the expression for the given base. Ko RESET [H20] [H3O+] [OHT] [H2CIO] [HCIO] [CIO) 2[H2O] 2[H3O+] 2[OH] 2[H2CIO] 2[HCIO] 2[CIO") [H2O]? [H30*]? [OH-]? [H2CIO]? [HCIO] [CIO"}}
The expression for Kb for the weak base Hypochlorite is: Kb =Methanoic Acid Aud-01 Genual formula of Carboxylic.
Why does KB stand for weak base?The acid ionisation constant is the name given to the dissociation constant for an aqueous solution of a weak acid (Ka). Similar to this, the base ionisation constant serves as the equilibrium constant for the reaction of a weak base with water (Kb). KaKb=Kw for any conjugate acid-base pair.
The expression for Kb for the weak base Hypochlorite can be constructed using the definition of Kb, which is:
Kb = [hydroxide-][hypochlorous acid]/[Hypochlorite "]
Using the given chemical equation, we can write:
Hypochlorite - + water = hydroxide- + hypochlorous acid
Taking the equilibrium constant expression for this equation, we get:
Kw/Ka = [hydroxide-][hypochlorous acid]/[Hypochlorite "]
where Kw is the ion product constant for water and Ka is the acid dissociation constant for hypochlorous acid.
Since Kw is constant, we can replace it with Kb for the base Hypochlorite :
Kb = Kw/Ka = [hydroxide-][hypochlorous acid]/[Hypochlorite "]
Therefore, the expression for Kb for the weak base Hypochlorite is:
Kb =Methanoic Acid Aud-01 Genual formula of Carboxylic.
To know more about Hypochlorite visit:-
https://brainly.com/question/10423391
#SPJ1
for benzene, c6h6, the heat of vaporization at its normal boiling point of 80 °c is 30.7 kj/mol. the entropy change when 1.67 moles of liquid c6h6 vaporizes at 80 °c, 1 atm is j/k.
The entropy change when 1.67 moles of liquid [tex]C_6H_6[/tex] vaporizes at 80 °C, 1 atm is approximately 145.18 J/K.
To find the entropy change when 1.67 moles of liquid benzene ([tex]C_6H_6[/tex]) vaporizes at 80°C (353.15 K) and 1 atm, you need to use the following formula:
ΔS = (ΔHvap / T) * n
Where:
ΔS is the entropy change
ΔHvap is the heat of vaporization (30.7 kJ/mol)
T is the temperature in Kelvin (353.15 K)
n is the number of moles (1.67 moles)
Step 1: Convert the heat of vaporization from kJ/mol to J/mol: 30.7 kJ/mol * 1000 J/kJ = 30700 J/mol
Step 2: Calculate the entropy change using the formula: ΔS = (30700 J/mol / 353.15 K) * 1.67 moles
Step 3: Calculate the result: ΔS = (86.94 J/mol*K) * 1.67 moles
Step 4: ΔS = 145.18 J/K
To know more about "Entropy" refer here:
https://brainly.com/question/28082783#
#SPJ11
A 500.0 g block of dry ice (solid CO2, molar mass = 44.0 g) vaporizes to a gas at
room temperature. Calculate the volume of gas produced at 25.0 °C and 1.75
atm.
Show your work
When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.
To calculate the volume of gas produced, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:
moles of CO2 = mass of dry ice / molar mass of CO2
moles of CO2 = 500.0 g / 44.0 g/mol
moles of CO2 = 11.36 mol
Since the dry ice sublimes directly to a gas, all of the moles of CO2 will be in the gas phase.
Next, we can plug in the values we know into the ideal gas law:
PV = nRT
V = nRT / P
where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).
Converting the temperature to Kelvin:
T = 25.0 °C + 273.15 = 298.15 K
Plugging in the values:
V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)
V = 439.4 L
Therefore, the volume of gas produced is approximately 439.4 L.
the total number of resonance forms of the cyclopentadienide anion, c5h5¯, is
a.two
b.three
c.four
d.five
The total number of resonance forms of the cyclopentadienide anion, [tex]C_5H_5^{-1}[/tex], is: d. Five. The cyclopentadienide anion has a five-membered carbon ring with one double bond between each pair of adjacent carbon atoms and one negative charge (anion).
The cyclo-penta-dienide anion [tex]C_5H_5^{-1}[/tex] has five resonance forms due to the delocalization of electrons among the five carbon atoms in the ring. This results in the formation of four equivalent carbon-carbon double bonds, which contribute to the stability of the anion. The resonance structures are formed by shifting the electrons around the ring, resulting in different arrangements of double bonds.
In resonance structures, the position of double bonds and negative charge can change while maintaining the overall structure. In the case of cyclopentadienide anion, there are five possible resonance forms, each with the double bonds and negative charge shifted by one position around the ring.
To learn more about resonance click here https://brainly.com/question/9790241
#SPJ11
Assign the following three compounds a relative order of reactivity towards electrophilic aromatic substitution. -OCH3 a. CHCI2 Submit Answer Try Another Version 7 item attempts remaining
Thus, -OCH3 is more reactive than [tex]CHCl_{2}[/tex] towards electrophilic aromatic substitution due to its electron-donating nature.
What factors affect Electrophilic Aromatic substitution?To assign a relative order of reactivity towards electrophilic aromatic substitution for the following three compounds: -[tex]OCH_{3}[/tex], and [tex]CHCl_{2}[/tex], we need to consider their electron-donating or withdrawing capabilities.
1. [tex]OCH_{3}[/tex]: This is a methoxy group, which is an electron-donating group (EDG). It donates electrons through resonance, activating the aromatic ring and making it more reactive towards electrophilic aromatic substitution.
2. [tex]CHCl_{2}[/tex]: This is a dichloromethyl group, which is an electron-withdrawing group (EWG). It withdraws electrons through the inductive effect, deactivating the aromatic ring and making it less reactive towards electrophilic aromatic substitution.
To know more about Electrophilic Substitution:
https://brainly.com/question/30867545
#SPJ11
what ion cause the reaction in fescn 2 fe(no3)3
The ion that causes the reaction in [tex]FeSCN^{2+[/tex] and [tex]Fe(NO^3)^3[/tex] is: Fe3+.
Your question involves the following reaction:
[tex]Fe^{3+[/tex] + SCN- → [tex]FeSCN^{2+[/tex]
The Fe(SCN)2+ complex ion is formed through a series of steps.
In summary, the ion causing the reaction between [tex]FeSCN^{2+[/tex] and [tex]Fe(NO^3)^3[/tex] is the [tex]Fe^{3+[/tex] ion.
To know more about "Analytical chemistry" refer here:
https://brainly.com/question/9477180#
#SPJ11
What is the molar mass of (S)-phenylethylammonium-(2R,3R) tartrate salt? molar mass: 282.1 g/mol Incorrect
The molar mass of (S)-phenylethylammonium-(2R,3R) tartrate salt is 270.29 g/mol.
To determine the molar mass of (S)-phenylethylammonium-(2R,3R) tartrate salt, we first need to find the molecular formula of this compound and then calculate its molar mass.
Step 1: Identify the molecular formula
(S)-phenylethylammonium-(2R,3R) tartrate salt is a complex compound, and its molecular formula is (C₈H₁₂N)(C₄H₄O₆). This formula consists of one phenylethylammonium ion (C₈H₁₂N) and one tartrate ion (C₄H₄O₆).
Step 2: Calculate the molar mass
To calculate the molar mass, we will add the molar masses of each element in the molecular formula, multiplied by their respective counts:
Molar mass of C: 12.01 g/mol
Molar mass of H: 1.01 g/mol
Molar mass of N: 14.01 g/mol
Molar mass of O: 16.00 g/mol
(C₈H₁₂N)(C₄H₄O₆) = [(8 x 12.01) + (12 x 1.01) + (1 x 14.01)] + [(4 x 12.01) + (4 x 1.01) + (6 x 16.00)]
= [96.08 + 12.12 + 14.01] + [48.04 + 4.04 + 96.00]
= 122.21 + 148.08
The molar mass of (S)-phenylethylammonium-(2R,3R) tartrate salt is 270.29 g/mol.
For learn more about molar mass, visit: https://brainly.com/question/25879634
#SPJ11