An atom has eight protons and nine neutrons. draw the atomic structure of the atom

When a solid dissolves in a liquid to form a solution, solid particles become evenly dispersed among liquid particles.

Solutions are formed when a solute particle dissolves in another substance known as a solvent.

Usually, solutions are formed when solids dissolve in liquids.

The solid is the solute while the liquid is the solvent.

When a solid dissolves in a liquid, solid particles become evenly dispersed among liquid particles.

Therefore, solutions are formed when solute particles dissolve in solvents.

Learn more about solutes and solutions at: https://brainly.com/question/25326161

#SPJ1

Answer:

c

Explanation:

chem ed 2022

Answer: 2 moles

Explanation:

We know from the equation that for every 3 moles of HCl consumed, 2 moles of water are consumed (based on the coefficients)

So, the answer is 2 moles.

Answer:

Fold the filter paper in fourths before placing it in the funnel and pour all the liquid through the funnel.

When comparing voltaic and electrolytic cells oxidation occurs at both the anode and the cathode.

In an electrolytic cell, the reaction is non-spontaneous so it requires some input of energy for it to function while for a voltaic cell, the reaction is spontaneous.

Oxidation occurs at the anode and reduction occurs at the cathode.

Thus, when comparing voltaic and electrolytic cells oxidation occurs at both the anode and the cathode.

Learn more about electrolytic cells here:

brainly.com/question/4030224

#SPJ1

Answer:

The law of conservation of mass

Explanation:

The law of conservation of mass

Answer:

The solution has a pH value of 9.3.

Explanation:

To solve this problem, we can first determine the H+ ion concentration and then use this value to calculate the pH. To find the H+ ion concentration from the OH- ion concentration, we should use Kw, which we know has a value of 1 * 10^(-14).

We can then use the following formula to solve for [H+]:

Kw = [H+][OH-]

10^(-14) = (2.02 * 10^(-5)) * [H+]

[H+] = 4.950495 * 10^(-10)

Now, we can find the pH using the formula pH = -log[H+].

pH = - log[H+]

pH = - log(4.950495 * 10^(-10))

pH = 9.3

Therefore, the correct answer is that the pH of the solution is 9.3. Note that an alternative way to solve the problem is to find the pOH from the OH- ion concentration and use the resulting value to determine the pH that way instead.

Hope this helps!

When the enthalpy of products is higher than that of reactants, such a reaction is said to be endothermic.

The enthalpy of a system refers to the heat content of the system.

When the enthalpy of reactants is higher than that of products in a reaction, such a reaction is said to be exothermic. On the other hand, if the enthalpy of products is higher than that of the reactants, it is endothermic.

More on the enthalpy of systems can be found here: https://brainly.com/question/13996238

#SPJ1

Answer:

D.

Explanation:

This is because this option would allow one to see the sorroundings of the new building. The others only give perpectives on what the new building looks like, isolated from its sorroundings.

Answer:

There are 72grams in 4 moles of H20

Answer:

ywhehehehehdgdudcdudcd uy dshdcvv

Explanation:

bdbdkzkzjzdkdkzdvdisisksjskakskskzbx vxydcdudschahahbshshs

The formula for the functional group of ether is R–O–R– group. Details about functional group can be found below.

A functional group is a specific grouping of elements that is characteristic of a class of compounds, and determines the chemical properties of that class.

Ether is any of a class of organic compounds containing an oxygen atom bonded to two hydrocarbon groups.

Therefore, the formula for the functional group of ether is R–O–R– group.

Learn more about ether at: https://brainly.com/question/23537178

#SPJ1

Answer: 0.1 M

Explanation:

Originally, [tex]0.500=\frac{\text{moles of solute}}{0.002}[/tex], so there was 0.001 mol of KOH.

Now, there is 8.0+2.0=10.0 mL of solution, so the new concentration is:

[tex]\frac{0.001}{0.01}=\boxed{0.1 \text{ M}}[/tex]

Answer:Amplitude:the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path.Wave speed:Wave speed is the distance a wave travels in a given amount of time, such as the number of meters it travels per second. Wave speed is related to wavelength and wave frequency by the equation: Speed = Wavelength x Frequency. This equation can be used to calculate wave speed when wavelength and frequency are known.Wavelength:Wavelength is the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space or along a wire. In wireless systems, this length is usually specified in meters (m), centimeters (cm) or millimeters (mm).Frequency:frequency, in physics, the number of waves that pass a fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion.

Explanation:

Answer:B

Explanation:got it right

The statement, "It is technically challenging to create nuclear fusion reactions safely and efficiently", is related to nuclear fusion reaction. Thus, Option B is correct.

This is due to the need to reach and maintain the extreme temperatures and pressures required for the reaction to occur and to confine and control the plasma in which the reaction takes place.

Nuclear fusion is a promising source of energy that has the potential to provide abundant, clean & sustainable power. However achieving nuclear fusion requires overcoming several challenges including the technical difficulties of creating and controlling the extreme conditions required for the reaction to occur.

Fusion reactions can produce high-energy neutrons that can damage the materials used to contain the reaction and require special handling and disposal. While progress has been made in developing fusion technologies, there is still much work to be done to make fusion a viable source of energy for the future.

Learn more about nuclear fusion reactions brainly.com/question/25387647

#SPJ1

Yes, it is true that the plant known as Lotus has a shiny surface.

This is referred to a type of plant which grows in mud and has micron- and nano-scale features.

It has a wax like surface which prevent dirt and water adhesion thereby making its surface to also be shiny and attracts insects for pollination in this regard.

Read more about Lotus here https://brainly.com/question/2028238

#SPJ1

Answer:

D

Explanation:

The weak crust of the earth does not hold together as well as strong crust.

Answer:

A and B was right in our test.

Explanation:

A was: A volcano can suddenly get taller every time it erupts

B was: Hot magma from inside Earth is released at weak points in the crust.

Answer:

Alkaline batteries stop working when all of the manganese dioxide has been converted.

Explanation: Hope it helps you :)))

Have a good day

Alkaline batteries eventually stop working because the chemicals inside them react and eventually use up all their energy.

The chemicals in an alkaline battery are zinc and manganese dioxide, which are separated by a separator. When the battery is used, zinc and manganese dioxide react to produce electricity.

The reaction between zinc and manganese dioxide is a one-way reaction, meaning that it cannot be reversed. This means that once the chemicals in the battery are used up, the battery will no longer produce electricity.

The rate at which an alkaline battery loses its charge depends on a number of factors, including the temperature, the amount of current being drawn from the battery, and the age of the battery.

In general, alkaline batteries will last longer in cool temperatures and when they are not being used heavily.

To know more about Alkaline batteries:

https://brainly.com/question/27850717

#SPJ3

Answer:

more rounded the grains are the more they have been moved around

Explanation:

Generally – the more rounded the grains are the more they have been moved around (i.e. the longer the length of time or distance they have moved). Angular grains cannot have travelled far

geolsoc.org.uk

The continuation of the electronic configuration would be [tex]3p^6, 4s^6, 3d^4.[/tex]

Electronic configuration, also called electronic structure, is the arrangement of electrons in energy levels around an atomic nucleus.

The initial p-orbital (the [tex]3p^3[/tex]) is incompletely filled. Thus, the first thing would be to fill it completely ([tex]3p^6[/tex]) so as to obey the orbital-filling rule. This leaves 6 more electrons.

After 3p orbital, the next orbitals are 4s, 3d, 4p, 5s, etc.

The 4s orbital will take a maximum of 2 electrons, leaving 4 more electrons.

Next would be the 3d orbital which can take a maximum of 8 electrons, but only 4 electrons are left.

Thus, the electronic configuration would be [tex]3p^6, 4s^6, 3d^4.[/tex]and elements is Vanadium (V).

Learn more about the electron configuration here:

brainly.com/question/13497372

$SPJ1

Answer:

Empirical formulas can be determined from the percent composition of a compound. In order to determine its molecular formula, it is necessary to know the molar mass of the compound. Chemists use an instrument called a mass spectrometer to determine the molar mass of compounds.

hope this helps :3

More positive ions shows acidic whereas more negative ions indicates basic solution.

That side which has more positive charges is considered as acidic solution while on the other hand, that region where negative charges are present in large number as compared to positive charges is considered as basic or alkaline solution.

So we can conclude that more positive ions shows acidic whereas more negative ions indicates basic solution.

Learn more about charge here: https://brainly.com/question/25923373

#SPJ1

Answer:

The slope of the trend line is 2.55; as the temperture.

Explanation:

Answer:

2,67 L

Explanation:

The new pressure of the gas would be 994 mmHg

According to Charle's law, the pressure of a gas at a constant temperature varies inversely with its volume.

Mathematically: p1v1 = p2v2, where p1 and p2 = initial and final pressure, and v1 and v2 = initial and final volume.

In this case, v1 = 14.5 L, p1 = 720 mmHg, and v2 = 10.5 L

p2 = p1v1/v2 = 720 x 14.5/10.5 = 994 mmHg

More on Charle's law can be found here: https://brainly.com/question/16927784

#SPJ1

The number of mole of oxygen gas, O₂ in the cylinder given the data is 0.5 mole

The mole of a substance is related to it's mass and molar mass according to the following equation:

Mole = mass / molar mass

From the question given, the following data were obtained:

Mole = mass / molar mass

Mole of O₂ = 16 / 32

Mole of O₂ = 0.5 mole

Complete question

See attached photo

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

Answer:

146 neutrons

Explanation:

The atomic number of uranium (see periodic table) is 92, and the mass number of the isotope is given as 238. Therefore, it has 92 protons, 92 electrons, and 238 — 92 : 146 neutrons.