an ideal transformer has 200 turns on its primary and 12 turns on its secondary. if the power input to the transformer is 120 kw, what is the power output?

Tripling the tension in a guitar string will change its natural frequency by a factor of A. [tex]3^1^/^2[/tex]

The natural frequency of a vibrating string, like a guitar string, is determined by its tension, length, and mass per unit length. This relationship is given by the formula:

f = (1/2L) × √(T/μ)

where f is the natural frequency, L is the length of the string, T is the tension, and μ is the mass per unit length.

Now, let's consider the case when the tension is tripled. Let f₁ be the original frequency and f₂ be the new frequency after tripling the tension. We have:

f₁ = (1/2L) × √(T/μ)
f₂ = (1/2L) × √(3T/μ)

To find the factor by which the natural frequency changes, divide f₂ by f₁:

(f₂ / f₁) = [√(3T/μ)] / [√(T/μ)] = √(3T/μ)×√(μ/T) = √3

So, tripling the tension in a guitar string will change its natural frequency by a factor of √3, which corresponds to option A. [tex]3^1^/^2[/tex] .

To know more about natural frequency refer here :

https://brainly.com/question/12936127

#SPJ11

The movement of a bar magnet inside a coil is caused by the interaction between the magnetic field of the magnet and the current in the coil. When the magnet moves inside the coil, it induces a current in the coil, which creates a magnetic field that interacts with the field of the magnet.

This interaction causes the magnet to move towards the opposite side of the coil.
When the magnet reaches the other side of the coil, the direction of the current is reversed due to the change in magnetic field direction. This change in current direction then creates a magnetic field that opposes the field of the magnet, causing it to move back towards the other side of the coil. This cycle of movement and change in current direction continues until the magnet comes to a stop at the center of the coil.
The reason a bar magnet moves inside a coil from one side to the other and then changes the direction of the current is due to electromagnetic induction.

Step 1: When a bar magnet is moved inside a coil, it generates a magnetic field around the coil.
Step 2: As the magnet moves, the magnetic field around the coil changes. This change in the magnetic field induces an electromotive force (EMF) in the coil.
Step 3: The induced EMF causes a current to flow through the coil in a specific direction, according to Lenz's Law. This law states that the induced current will always flow in such a way that it opposes the change in the magnetic field that caused it.
Step 4: When the bar magnet passes through the center of the coil and starts moving towards the other side, the magnetic field changes direction.
Step 5: As a result of this change in the magnetic field, the induced EMF and current also change direction.
In summary, a bar magnet moves inside a coil from one side to the other and changes the direction of the current due to electromagnetic induction and Lenz's Law.

Visit here to learn more about magnetic field:

brainly.com/question/14848188

#SPJ11

The magnitude of the total linear acceleration at t = 0 for a point on the object 8.5 cm from the axis is 11.9 cm/s².

To find the linear acceleration, we first need to determine the angular acceleration (α) and angular velocity (ω) at t = 0.

1. Differentiate θ(t) with respect to time to find the angular velocity: ω(t) = d(θ(t))/dt = βθ0 * [tex]e^\beta^t[/tex]
2. Differentiate ω(t) to find the angular acceleration: α(t) = d(ω(t))/dt = β²θ₀ * [tex]e^\beta^t[/tex].
3. Plug in t = 0 into both equations: ω(0) = βθ₀ and α(0) = β²θ₀.
4. Calculate the radial (ar) and tangential (at) linear accelerations: ar = rω² and at = rα.
5. Add ar and at in quadrature to find the total linear acceleration: a_total = √(ar² + at²).

With the given values of β = 2 s⁻¹, θ₀ = 0.7 rad, and r = 8.5 cm, the total linear acceleration is 11.9 cm/s².

To know more about angular acceleration click on below link:

https://brainly.com/question/29428475#

#SPJ11

As the Moon moves further away from Earth, the apparent size of the Moon will appear smaller from Earth.

This means that during a solar eclipse, the Moon may not be able to completely block out the Sun, resulting in what is called an annular eclipse. In an annular eclipse, the outer edges of the Sun will still be visible around the Moon, creating a "ring of fire" effect. So, in the distant future, solar eclipses may be more likely to be annular eclipses rather than total eclipses due to the increasing distance of the Moon from Earth. However, it is important to note that this process of the Moon moving further away from Earth is a slow one, taking place over millions of years.

To learn more about distance click here https://brainly.com/question/29769926

#SPJ11

Hi! I'd be happy to help you with your question.

To find the final temperature of the iron piece, we can use the formula:

q = mcΔT

where:
q = heat supplied (9.5 J)
m = mass of iron (10.0 g)
c = specific heat of iron (0.450 J/g·°C)
ΔT = change in temperature (final temperature - initial temperature)

First, we need to solve for ΔT:

9.5 J = (10.0 g) × (0.450 J/g·°C) × ΔT

To find ΔT, divide both sides by the product of mass and specific heat:

ΔT = 9.5 J / (10.0 g × 0.450 J/g·°C) = 2.11°C

Now, we can find the final temperature by adding the initial temperature to the change in temperature:

Final temperature = initial temperature + ΔT = 25°C + 2.11°C = 27.11°C

So, the final temperature of the 10.0 g piece of iron is 27.11°C when supplied with 9.5 J of heat.

To know more about temperature visit link :

https://brainly.com/question/15267055

#SPJ11

The magnitude and direction of the magnetic force each exerts on the other is 0.006392 N towards each other.

To find the magnitude and direction of the magnetic force between the two power lines, we'll use Ampere's Law. The magnetic force between two parallel wires carrying current is given by:

F = (μ₀ * I₁ * I₂ * L) / (2 * π * d)

where F is the magnetic force, μ₀ is the permeability of free space (4π × 10⁻⁷ Tm/A), I₁ and I₂ are the currents in the wires, L is the length of the wires, and d is the distance between the wires.

In this case, I₁ = 140 A, I₂ = -140 A (since the currents are antiparallel), L = 280 m, and d = 0.35 m (converted from 35 cm).

F = (4π × 10⁻⁷ Tm/A * 140 A * -140 A * 280 m) / (2 * π * 0.35 m)

F ≈ -0.006392 N (negative sign indicates the force is attractive)

Since the forces are attractive, then the direction is towards each other. Hence, the magnetic force each powerline exerts on the other is 0.006392 N towards each other.

Learn more about Ampere's Law here: https://brainly.com/question/17070619

#SPJ11

The longest wavelength in nanometers that will undergo destructive interference when shone on the oil can be determined by wavelength and destructive interference condition using the formula λ = (2 * Δ) / (2m + 1).

To determine the longest wavelength in nanometers that will undergo destructive interference when shone on the oil, we'll need to consider the following terms:

1. Wavelength: The distance between two consecutive points on a wave (e.g., from one crest to another). It is measured in nanometers (nm) for light waves.
2. Destructive interference: A phenomenon that occurs when two waves meet and their amplitudes cancel each other out, resulting in a reduced or zero-amplitude wave.

In order to provide a specific answer to your question, we would need additional information, such as the thickness of the oil layer and the angle of incidence of the light.

The constructive and destructive interference in thin films (like oil) is governed by the interference conditions based on the path difference between the light waves reflecting off the top and bottom surfaces of the film.

However, a general approach to find the longest wavelength (λ) that undergoes destructive interference is as follows:

Step 1: Determine the oil layer thickness (d) and the angle of incidence (θ).

Step 2: Calculate the optical path difference (Δ) using the formula Δ = 2d * cos(θ).

Step 3: Use the destructive interference condition,

Δ = (m + 1/2)λ, where m is an integer.

Step 4: Rearrange the formula and solve for λ:

λ = (2 * Δ) / (2m + 1).

Step 5: Find the largest integer value for m that satisfies the given conditions, and calculate the longest wavelength that undergoes destructive interference.

Learn more about wavelength:

https://brainly.com/question/10750459

#SPJ11

The speed of the boat relative to the shore while moving upstream is 3.0 m/s.

To find the speed of the boat relative to the shore while moving upstream, we need to consider the speed of the boat in still water and the speed of the river flow.
Step 1: Identify the boat's speed in still water, which is 4 m/s.
Step 2: Identify the speed of the river flow, which is 1 m/s.
Step 3: Since the boat is moving upstream (against the river flow), we subtract the river's speed from the boat's speed in still water: 4 m/s - 1 m/s = 3 m/s.
So, the speed of the boat relative to the shore while moving upstream is 3.0 m/s. Your answer is (b) 3.0 m/s.

learn more about speed Refer: https://brainly.com/question/30462853

#SPJ11

The magnitude of the net force on +q will be less.

The magnitude of the net electric force on +q will be greater than the magnitude of the net electric force on +q.

In the given scenario, the force F_P on the test charge +q will be attractive towards the negative point charge -Q. The force F_R on the rod will also be attractive towards -Q due to the presence of the negative charge.

However, the force on the test charge +q will be less than the force on the rod as the test charge is equidistant from all points on the rod and experiences equal but opposite forces from opposite points on the rod, resulting in cancellation.

When a second negative point charge -Q is placed, the net force on the test charge +q will be greater than the net force in part b. This is because the presence of the second negative charge will cause a repulsive force on the first negative charge, which will in turn reduce the attractive force on the test charge +q towards the negative charge -Q.

As a result, the net electric force on the test charge +q will be greater due to the reduced attractive force towards the negative charge -Q.

For more such questions on Net electric force.

https://brainly.com/question/30262205#

#SPJ11

The big ideas needed to find the initial speed of a clay ball of mass are Newton's laws of motion, kinetic energy, and conservation of momentum.

To find the initial speed of a clay ball, you will need to understand Newton's laws of motion, which govern the movement of objects.

First, consider the forces acting on the clay ball and how they influence its acceleration. Then, apply the second law of motion, which states that the force acting on an object is equal to its mass times its acceleration (F=ma). Next, use the concept of kinetic energy, which is the energy an object possesses due to its motion.

The formula for kinetic energy is KE = (1/2)mv², where m is the mass and v is the velocity.

Finally, apply the principle of conservation of momentum, which states that the total momentum before a collision or interaction is equal to the total momentum after. By analyzing the situation using these concepts, you can solve for the initial speed of the clay ball of mass.

To know more about conservation of momentum click on below link:

https://brainly.com/question/25028535#

#SPJ11

The emf ℰx of the cell being measured in the potentiometer is 21.41 V. To calculate the emf ℰx of the cell being measured in a potentiometer, we can use the formula:
ℰx = ℰ standard * (rs + rx) / rx

Where ℰ standard is the emf of the standard cell, rs is the resistance in the potentiometer arm, and rx is the resistance of the resistor in series with the cell being measured.

Substituting the given values, we get:
ℰx = 12.0 * (2.300 + 5.100) / 5.100
ℰx = 12.0 * 1.7843
ℰx = 21.41 V

Therefore, the emf ℰx of the cell being measured in the potentiometer is 21.41 V. This means that the cell being measured has a higher emf than the standard cell. The potentiometer balances when the potential difference across the resistor in series with the cell being measured is equal to the potential difference across the potentiometer arm. This indicates that the two potential differences are equal and opposite, and cancel each other out, resulting in a balanced condition.

For more such questions on Potentiometer, visit:

brainly.com/question/30009729

#SPJ11

The distance from the center of the central maximum to the first minimum is approximately 0.00357 m.

To find this distance, use the formula for the angular position of the first minimum in a double-slit interference pattern: θ = sin^(-1)(λ / (2 * d)), where λ is the wavelength (660 nm), and d is the slit separation (0.260 mm).

Convert the wavelength and slit separation to meters, and calculate the angle θ. Then, use the small angle approximation and the formula y = L * tan(θ), where L is the distance from the slits to the screen (0.990 m).

Calculate y, which represents the distance on the screen from the center of the central maximum to the first minimum.

To know more about central maximum click on below link:

https://brainly.com/question/30365113#

#SPJ11

The second derivative of f(x) = [tex]-x^5[/tex] at x = -2 is -160

The second derivative of a function gives us information about the rate of change of the first derivative. In this case, we are given the function [tex]f(x) = -x^5,[/tex] and we need to find the second derivative of the function at x = -2.

To find the second derivative of f(x), we need to take the derivative of the first derivative of the function. Using the power rule of differentiation, we find that the first derivative of [tex]f(x) is f'(x) = -5x^4[/tex]. Then, we take the derivative of f'(x) to get the second derivative of f(x), which is f''(x) = [tex]-20x^3.[/tex]

Substituting x = -2 into the expression for f''(x), we get f''(-2) = -20(-2)^3 = -160.

Therefore, the second derivative of f(x) at x = -2 is -160. This means that the rate of change of the slope of the function at x = -2 is negative and steep, indicating that the function is concave down at this point.

Learn more about second derivative

https://brainly.com/question/29090070

#SPJ4

The amount of energy delivered to the toaster is 43,876.8 joules.

This is the amount of electrical energy that is converted into heat energy to toast the bread.

To solve this problem, we need to use the formula for electrical energy:

Energy = Power x Time

where Power is the electrical power in watts and Time is the time in seconds.

We can find the electrical power using the formula:

Power = Voltage² / Resistance

where Voltage is the electrical potential difference in volts and Resistance is the electrical resistance in ohms.

In this case, we know the resistance of the toaster (13 ohms) and the voltage of the outlet (120 volts). Using the formula for power, we get:

Power = 120² / 13 = 1096.92 watts

Now we can use the formula for energy to calculate the total energy delivered to the toaster:

Energy = Power x Time = 1096.92 x 40 = 43,876.8 joules

To know more about electrical energy click on below link:

https://brainly.com/question/18739636#

#SPJ11

Answer:Racial formation was coined by sociologists Michael Omi and Howard Winant in the first edition of their book Racial Formation in the United States in 1986 – now in its third edition (Omi and Winant 2014). The theory has become a dominant perspective within sociology and has contributed to understanding the role of race in the contemporary United States during the latter half of the twentieth and start of the twenty-first centuries. Racial formation highlights the ways that “race” is socially constructed. That is, how do processes connected to social, economic, and political forces shape how racial categories and hierarchies are formed? This question forces us to focus on both the historical context of race categorization, as well as where our current social contexts are positioned.

The energy of photons with wavelength λ=5800 Å is approximately 3.4 x  [tex]10^-^1^9[/tex]  Joules . option e is correct. .

To find the energy of the photons, we can use the formula:

E = (hc) / λ

where E is the energy of the photon, h is the Planck's constant (6.63 x  [tex]10^-^3^4[/tex]Js), c is the speed of light (3 x [tex]10^8[/tex] m/s), and λ is the wavelength of the photon.

First, let's convert the wavelength from Å to meters:

5800 Å = 5800 x 10^-10 meters = 5.8 x  [tex]10^-^7[/tex] meters

Now, we can plug in the values into the formula:

E = (6.63 x [tex]10^-^3^4[/tex]Js × 3 x [tex]10^8[/tex]m/s) / 5.8 x [tex]10^-^7[/tex]m

E ≈ 3.43 x [tex]10^-^1^9[/tex] Joules

So, the energy of photons with wavelength λ=5800 Å is approximately  [tex]10^-^1^9[/tex] Joules (option e).

To know more about energy of photons refer here :

https://brainly.com/question/30741819

#SPJ11

The energy of photons with wavelength λ=5800 Å is approximately 3.4 x  [tex]10^-^1^9[/tex]  Joules . option e is correct. .

To find the energy of the photons, we can use the formula:

E = (hc) / λ

where E is the energy of the photon, h is the Planck's constant (6.63 x  [tex]10^-^3^4[/tex]Js), c is the speed of light (3 x [tex]10^8[/tex] m/s), and λ is the wavelength of the photon.

First, let's convert the wavelength from Å to meters:

5800 Å = 5800 x 10^-10 meters = 5.8 x  [tex]10^-^7[/tex] meters

Now, we can plug in the values into the formula:

E = (6.63 x [tex]10^-^3^4[/tex]Js × 3 x [tex]10^8[/tex]m/s) / 5.8 x [tex]10^-^7[/tex]m

E ≈ 3.43 x [tex]10^-^1^9[/tex] Joules

So, the energy of photons with wavelength λ=5800 Å is approximately  [tex]10^-^1^9[/tex] Joules (option e).

To know more about energy of photons refer here :

https://brainly.com/question/30741819

#SPJ11

A) To find the impedance of the large air conditioner (Z), we can use the formula:

Z = √(R² + XL²)

where R is the resistance (8.0 Ω) and XL is the inductive reactance (17 Ω).

Z = √(8.0² + 17²) = √(64 + 289) = √353 ≈ 18.8 Ω

B) To find the rms current (Irms), we can use Ohm's Law:

Irms = Vrms / Z

where Vrms is the rms voltage (220 V) and Z is the impedance (18.8 Ω).

Irms = 220 / 18.8 ≈ 11.7 A

C) To find the average power consumed by the air conditioner (Pav), we can use the formula:

Pav = Irms² × R

where Irms is the rms current (11.7 A) and R is the resistance (8.0 Ω).

Pav = (11.7²) × 8 ≈ 1372 W

Your answer:
A) The impedance of the air conditioner is approximately 18.8 Ω.
B) The rms current is approximately 11.7 A.
C) The average power consumed by the air conditioner is approximately 1372 W.

https://brainly.com/question/31484975

#SPJ11

Magnetron in a kitchen microwave oven operates as a resonant circuit similar to an RLC circuit. The resonant frequency is determined by the dimensions of the resonant cavity and the magnetic field strength. This generates high-frequency microwaves that are used to heat food.

A magnetron in a kitchen microwave oven is a type of vacuum tube that generates microwaves used to heat food. The magnetron operates by using a combination of electric and magnetic fields to excite electrons and cause them to move in a circular motion.

This movement creates a resonant circuit that generates a high-frequency electromagnetic wave at a frequency of 2.50 GHz. An RLC circuit is an electrical circuit that contains a resistor, an inductor, and a capacitor.

The circuit can resonate at a certain frequency, which is determined by the values of the components in the circuit. In a magnetron, the resonant circuit is created by the interaction of the magnetic field and the electrons moving in the circular motion.

Know more about frequency here:

brainly.com/question/14480835

#SPJ11

the magnitude of the momentum of the marble is approximately 0.001815 kg·m/s.

The momentum of an object is given by the equation:

Momentum (p) = Mass (m) × Velocity (v)

Given:

Mass (m) = 0.0033 kg

Velocity (v) = 0.55 m/s

Plugging in these values, we can calculate the momentum:

Momentum (p) = 0.0033 kg × 0.55 m/s

Momentum (p) = 0.001815 kg·m/s (rounded to 3 significant figures)

Therefore, the magnitude of the momentum of the marble is approximately 0.001815 kg·m/s.

Learn more here https://brainly.com/question/8000834

#SPJ11

To calculate the three-sigma control limits, we first need to find the mean and standard deviation of the sample.

The mean is:

μ = (4 + 12 + 16 + 8 + 9 + 6 + 5 + 12 + 15 + 7 + 6 + 4 + 2 + 11) / 14 = 8.071

The standard deviation is calculated using the standard deviation formula and is arrived at:

σ = 4.319

The three-sigma control limits are:

Upper control limit = μ + 3σ = 8.071 + (3 × 4.319) = 20.027

Lower control limit = μ - 3σ = 8.071 - (3 × 4.319) = -3.886

b. We can check if the process is in control by looking at whether any of the data points fall outside of the control limits.

From the given data, we can see that the maximum number of complaints is 16, which is well within the upper control limit of 20.027. The minimum number of complaints is 2, which is also well within the lower control limit of -3.886.

Therefore, based on the given data, we can conclude that the process is in control.

Learn more about mean and standard deviation here:

https://brainly.com/question/28108712

#SPJ1

As the object moves on the plane, its displacement from the unstretched position is x The work done by the object is mgsinθ.

Thus, The units of measurement for work, force, and displacement are joules, newtons, and meters, respectively.

When an object is moved across a specific distance by an external force, work is the quantity of energy that is transmitted to the object.

The quantity of energy transmitted to an object through work is referred to as the work done on the thing. Force on and displacement of the object are the two basic parts of work done on an object. For a force to exert its force along an object's path of motion, the object must be moved along that path.

Thus,  As the object moves on the plane, its displacement from the unstretched position is x . The work done by the object is mgsinθ.

Learn more about Work done, refer to the link:

https://brainly.com/question/3902440

#SPJ12

The cells in the cortex that learn to recognize meaningful objects are known as content-loaded cells. These cells are responsible for encoding and storing information about objects that are relevant and meaningful to the individual. As an individual encounters different objects, the content-loaded cells in the cortex become activated and begin to create associations between the object and its features. Over time, these associations become more robust, allowing the individual to easily recognize and identify the object. This process is critical for perception and learning and is one of the key ways in which the brain is able to process and make sense of the world around us.

The cortex is a part of the brain that is involved in many different functions, including perception, movement, and memory. Within the cortex, there are specific regions that are responsible for processing information related to visual perception.

The term "cortex" is not commonly used. However, there are a few instances where it may be referenced. One such instance is in the field of neuroscience, where the cortex refers to the outer layer of the brain that is responsible for many of the brain's complex functions, such as perception, thought, and voluntary movement.

Another possible reference to the cortex in physics could be in the study of plasma physics. In this context, the term "cortex" may refer to the edge of a plasma, where the plasma meets the surrounding material. The plasma cortex is an important area for understanding plasma behavior, as it can influence the transport of particles and energy in and out of the plasma. Overall, the term "cortex" is not a common concept in physics, but in certain contexts, it may refer to the outer layer of the brain or the edge of a plasma.

To learn more about Cortex visit here:

brainly.com/question/12993641

#SPJ4

If the plate area of a parallel plate capacitor is decreased while it is connected to a 9 volt battery, the electric field between the plates of the capacitor will increase.

This is because the capacitance of a parallel plate capacitor is inversely proportional to the distance between the plates. As the plate area decreases, the distance between the plates decreases, which increases the capacitance. The relationship between the voltage (V), electric field (E), and the plate separation (d) can be expressed as: V = E * d. Since the voltage across the capacitor remains constant, the increase in capacitance leads to an increase in the electric field between the plates. The dielectric constant of the dielectric material between the plates will also affect the capacitance, but it is not directly related to the increase in electric field due to the decrease in plate area.

To learn more about capacitor click here https://brainly.com/question/29301875

#SPJ11

The angular acceleration of the bicycle wheel is 23.9 rad/s².

To find the angular acceleration of the bicycle wheel, we need to use the formula:
α = τ / I
where α is the angular acceleration, τ is the torque applied, and I is the moment of inertia of the wheel. Since we are treating the wheel as a hoop, the moment of inertia can be found using the formula:
I = MR²
where M is the mass of the wheel and R is the radius of the wheel. Substituting the given values, we get:
I = (0.65 kg) × (0.25 m)²
I = 0.0406 kg⋅m²

Now we can substitute the values into the formula for angular acceleration:
α = (0.97 N⋅m) / (0.0406 kg⋅m²)
α = 23.9 rad/s²

To learn more about Angular Acceleration : https://brainly.com/question/21278452

#SPJ11

the speed of sound in air is 343 m/s. Option d (343 m/s) is the correct answer.

How to solve the question?

The speed of sound in air can be calculated using the formula:

v = d/t

Where v is the speed of sound, d is the distance traveled by the sound wave, and t is the time taken for the sound wave to travel that distance.

In this problem, we are given that the distance between the chime and the observer is 515 m, and the time taken for the sound wave to travel this distance is 1.50 s. So, we can use the above formula to calculate the speed of sound:

v = d/t = 515/1.5 = 343 m/s

Therefore, the speed of sound in air is 343 m/s.

Option d (343 m/s) is the correct answer.

It's worth noting that the speed of sound in air can be affected by various factors such as temperature, humidity, and pressure. At a standard temperature of 20°C and normal atmospheric pressure, the speed of sound in air is approximately 343 m/s. However, this value can vary depending on the conditions in which the sound wave is traveling.

To know more about sound waves visit :-

https://brainly.com/question/1199084

#SPJ1

The sound level (in dB) of a hair dryer emitting a sound wave with an intensity of 4.65 µW/m² can be calculated using the following formula:

Sound level (dB) = 10 log (I/I0)

Where I is the sound wave intensity in question (4.65 µW/m²) and I0 is the reference intensity of 1 µW/m².

Substituting the values into the formula, we get:

Sound level (dB) = 10 log (4.65/1)

Sound level (dB) = 10 log (4.65)

Sound level (dB) = 57.6 dB (rounded to one decimal place)

Therefore, the sound level emitted by the hair dryer is 57.6 dB.
Hi! To calculate the sound level in decibels (dB) of a sound wave emitted by a hair dryer with an intensity of 4.65 µW/m², you can use the following formula:

Sound level (dB) = 10 × log10(I/I₀)

where I is the intensity of the sound wave (4.65 µW/m²) and I₀ is the reference intensity, which is 10^-12 W/m².

So, Sound level (dB) = 10 × log10(4.65 × 10^-6 W/m² / 10^-12 W/m²) = 73.68 dB

Therefore, the sound level of the hair dryer is approximately 73.68 dB.

Visit here to learn more about sound wave brainly.com/question/21995826

#SPJ11

The vector that models the ship's movement in component form is ⟨38.71, 39.21⟩.

To find the vector in component form, we will follow these steps:
1. Convert the bearing of N47E to a standard angle.
2. Calculate the horizontal (x) and vertical (y) components of the vector using trigonometry.
Step 1: Convert N47E to a standard angle:
N47E means 47 degrees to the east of the north direction. To find the standard angle, measured counterclockwise from the positive x-axis, we subtract 47 degrees from 90 degrees: 90 - 47 = 43 degrees.
Step 2: Calculate the horizontal and vertical components:
Now that we have the standard angle, we can use trigonometry to find the x and y components of the vector. The ship travels 55 miles at an angle of 43 degrees. Using cosine and sine, we get:
x = 55 * cos(43°) ≈ 38.71
y = 55 * sin(43°) ≈ 39.21
Thus, the vector in component form is ⟨38.71, 39.21⟩.

Learn more about vector here:

https://brainly.com/question/29740341

#SPJ11

After powering the circuit for 1 hour, the battery has 75 kJ - 12.96 kJ = 62.04 kJ of energy left.

To solve this problem, we first need to calculate the amount of energy supplied by the battery to the circuit in one hour. This can be done using the formula:

Energy = Power x Time

Since the battery supplies a constant voltage of 6 volts to the circuit, we can use Ohm's Law (V = IR) to calculate the current flowing through the circuit. Assuming the resistance of the circuit is known, we can use the formula:

Power = Voltage x Current

Once we have the power supplied by the battery, we can use it to calculate the energy supplied in one hour:

Energy = Power x Time = (Voltage x Current) x Time

Now, let's assume that the circuit has a resistance of 10 ohms. Using Ohm's Law, we can calculate the current flowing through the circuit as:

Current = Voltage / Resistance = 6 V / 10 Ω = 0.6 A

Using the formula for power, we can calculate the power supplied by the battery as:

Power = Voltage x Current = 6 V x 0.6 A = 3.6 W

Finally, we can calculate the energy supplied by the battery in one hour as:

Energy = Power x Time = 3.6 W x 1 hour = 3.6 Wh

Note that 1 Wh (watt-hour) is equivalent to 3600 joules (J), so we can convert the energy supplied by the battery to joules as:

Energy = 3.6 Wh x 3600 J/Wh = 12,960 J = 12.96 kJ

Therefore, after powering the circuit for 1 hour, the battery has 75 kJ - 12.96 kJ = 62.04 kJ of energy left.

For more questions on batteries and circuits - https://brainly.com/question/14998759

#SPJ11

The capacitance of the mercury spherical conductor is 7.05×10^-4 F.

To determine the capacitance of a spherical conductor, we need to use the formula C = 4πεr / (1/κ), where C is capacitance, ε is the permittivity of free space (8.85×10^-12 F/m), r is the radius of the conductor (2.44×10^6 m), and κ is the dielectric constant. Since we are assuming the conductor to be mercury, which is a metal, its dielectric constant is very close to 1.

Substituting the values in the formula, we get:
C = 4πεr
C = 4π × 8.85×10^-12 F/m × 2.44×10^6 m
C = 7.05×10^-4 F

To learn more about Capacitance of Spherical Conductor : https://brainly.com/question/12719729

#SPJ11

The total momentum of the system after they push off is 0.

According to the law of conservation of momentum, the total momentum of a system before and after an interaction must be the same, as long as there are no external forces acting on the system.

In this case, the two ice skaters are initially at rest, which means that the total momentum of the system is zero.

When the two skaters push off one another, they exchange momentum.

Skater A pushes on skater B with a certain amount of force, and as a result, skater A moves in the opposite direction with an equal amount of momentum.

Similarly, skater B pushes on skater A with the same force, and moves in the opposite direction with the same amount of momentum.

Since the momentum of each skater is equal and opposite, the total momentum of the system after they push off is still zero.

However, each skater now has an individual momentum that is equal in magnitude but opposite in direction to the other skater's momentum.

In summary, the total momentum of the system (i.e. both skaters) is conserved before and after they push off, and is equal to zero.

Learn more about momentum:

https://brainly.com/question/1042017

#SPJ11