An object being pulled towards Earth by gravity is said to be in __.

Answer:

B. 0.552

Explanation:

To find the resistance in the circuit above, u simply divide the current in the circuit by the voltage to get the resistance.

Answer:

The lens to be used for the objective is lens A

Explanation:

The objective of a compound microscope

The focal length of the lens used for the objective = 1/(magnification obtained)

The focal length of most modern is equal to the tube length

The range of sizes for the focal length of a microscope is between 2 mm and 40 mm

Therefore, the appropriate lens to be used for the objective of the compound is lens A that has a focal length of 0.50 cm = 5 mm

Answer:

See explanations below

Explanation:

For resistors in series, the will be added for those in parallel, we will take the sum of their reciprocal

A) 3 2ohms resistors in series

Equivalent resistance = 2 + 2 + 2

Equivalent resistance = 6ohms

B) 2 4 ohms resisstors in parallal

1/R = 1/4 + 1/4

1/R = 2/4

R = 4/2

R = 4ohms

Equivalent resistance is 2ohms

C) 4 ohms with in series with 8ohms = 4 + 8

Equivalent resistance = 4 + 8

Equivalent resistance = 12ohms

D) 4 ohms and 2 ohms in parallel is expressed as;

1/R = 1/4 + 1/2

1/R = 1+2/4

1/R = 3/4

R = 4/3

4/3 ohms in series with 6ohms

Equivalent resistance = 4/3 + 6

Equivalent resistance =4+18/3

Equivalent resistance = 22/3 ohms

Answer:Due to change in direction

Explanation:

Given

Initially train has traveled a 100 km in North and after exchanging some railroad cars, it traveled 100 in south.

The velocity of the train changes as it direction of motion changes. Velocity is the vector quantity which require direction and magnitude for its reperesentation.

Answer:

220 A

Explanation:

The magnetic force on the floating rod due to the rod held close to the ground is F = BI₁L where B = magnetic field due to rod held close the ground = μ₀I₂/2πd where μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, I₂ = current in rod close to ground and d = distance between both rods = 11 mm = 0.011 m. Also, I₁ = current in floating rod and L = length of rod = 1.1 m.

So, F = BI₁L

F = (μ₀I₂/2πd)I₁L

F = μ₀I₁I₂L/2πd

Given that the current in the rods are the same, I₁ = I₂ = I

So,

F = μ₀I²L/2πd

Now, the magnetic force on the floating rod equals its weight , W = mg where m = mass of rod = 0.10kg and g = acceleration due to gravity = 9.8 m/s²

So, F = W

μ₀I²L/2πd = mg

making I subject of the formula, we have

I² = 2πdmg/μ₀L

I = √(2πdmg/μ₀L)

substituting the values of the variables into the equation, we have

I = √(2π × 0.011 m × 0.1 kg × 9.8 m/s²/[4π × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2 × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2.2 × 10⁻⁷ H])

I = √(0.0049 × 10⁷kgm²/s²H)

I = √(0.049 × 10⁶kgm²/s²H)

I = 0.22 × 10³ A

I = 220 A

Answer:

I don't know i really I'm sorry I wish I could help

Suppose that Joe and Jim are twins and :

________________________________

Joe :

Height = 1000 m

==》 PE = 150 × 1000

Weight = 150 N

==》 PE = 150,000 j

_________________________________

Jim :

Height = 1500 m

==》PE = 100 × 1500

Weight = 100 N

==》PE = 150,000 j

______________________________

As u can see Joe and Jim has equal PE before they begin skiing .

Answer:

the speed of the wave is 0.65 m/s

Explanation:

Given;

distance between two successive crests, λ = 1.4 m

number of crests, n = 8

number of waves formed = 7

The total distance covered by the wave, d= 7λ = 7 x 1.4 = 9.8 m

time of motion of the wave, t = 15 s

The speed of the wave is calculated as;

V = d/t

V = 9.8 / 15

V = 0.65 m/s

Therefore, the speed of the wave is 0.65 m/s

Explanation:

Since the mast is a conductor and connected to the plastic so charge transfer takes place between the mast and the tube because the mast is connected to the ground with wire which is called grounded which means its potential is 0 equal to the ground so that charge can transfer from plastic tube to the ground. This is why the wire is used to connect the metal mast to the Earth.

Answer:

I was going to give you the paper where I saw it but since you are not giving enough points I can not give you so I am only going to give you some of these that are here sorry

Explanation:

1.

[tex]9^{2} + 12^2 = x^2\\81 + 144= x^2\\\sqrt{225} = \sqrt{x} \\ 15=x\\\\ 2.\\x^2+12^2+=13^2\\x^2+144 =169\\x^2 = 25\\\sqrt{x^2 =\sqrt{25\\\\[/tex]

x=5

[tex]3.\\12^2+32^2 = x^2\\34.176= x[/tex]

7.

5,12,13

9.

[tex]\frac{x}{4} ,\frac{12}{4} ,\frac{20}{4}\\\\\frac{x}{4},3,5 \\\\x=16\\\\12. \\x^2 + 48^2=50^2\\\\x^2=196\\x=14[/tex]

Answer:

Gaseous; liquid.

Explanation:

A planet can be defined as a large celestial body having sufficient mass to allow for self-gravity and make it assume a nearly circular shape (hydrostatic equilibrium), revolves in an orbit around the Sun in the solar system and has a cleared neighborhood.

Some examples of the planet are Mars, Venus, Earth, Mercury, Neptune, Jupiter, Saturn, Uranus, Pluto, etc.

Basically, the planets are divided into two (2) main categories and these includes;

I. Inner planets: these planets are the closest to the sun and comprises of mercury, venus, earth and mars.

II. Outer planets: these planets are beyond the asteroid belt and comprises of jupiter, saturn, uranus and neptune, from left to right of the solar system.

These outer planets are made mostly of gases (hydrogen and helium) causing them to be less dense than the solid inner planets. These gases are generally known to be less dense in terms of physical properties.

In conclusion, Planets in the solar system can vary from rocky and terrestrial objects to gaseous and liquid object.

However, the set of characteristics which is unique to the outer planets are gaseous and liquid.

Answer:

I am happy with you the father said to his daughter

Answer:

Because Jupiter is a much larger planet than Earth, its gravitational pull is 240% stronger than that of earth. This is why sawdust, which is lighter than its equivalent measure of sugar would weigh more on Jupiter.

Explanation:

Let's assume that a type of bag can contain 50 kilograms of sugar. If that same bag was filled up with sawdust instead, it would weigh far less than 50Kg.

If that bag of sawdust, on earth weighed 35Kg for instance, on Jupiter, the new weight would be:

35Kg x 2.4 = 84Kg

Put differently, Jupiter simply has a stronger gravitational pull than earth. This extra pull is attributed to its size.

Cheers

Answer:

Explanation:

Gravity pulls everything down at the same rate of 9.8 m/s/s. If you're looking for the normal force, which is the same as the weight of the object, we'll find that, just in case.

w = mg which says that the normal force/weight of an object is equal to its mass times the pull of gravity:

w = 4.0(9.8) so

w = 39N

Answer:

Explanation:

Wavelength is one way of measuring the size of waves. ... The wavelength of a transverse wave can be measured as the distance between two adjacent crests. The wavelength of a longitudinal wave can be measured as the distance between two adjacent compressions.Feb 19, 2021

Answer:

A point mutation or substitution is a genetic mutation where a single nucleotide base is changed, inserted or deleted from a DNA or RNA sequence of an organism's genome.

Answer:

P = V * Q      potential energy = potential * charge

V = =3.09 J / 6.93 * 10E-4 C = 4460 Joules / Coulomb

The electric potential, V at the point given the data from the question is –4458.87 V

The electric potential or electromotive force (EMF) is defined as the energy supplied by a battery per unit charge. Mathematically, it can be expressed as:

Electromotive force (EMF) = Work (W) / charge (Q)

V = EMF = W / Q

V = W / Q

V = –3.09 / 6.93×10⁻⁴

V = –4458.87 V

Learn more about electric potential:

https://brainly.com/question/820393

#SPJ2

Answer: Mineral and non- mineral components circulate in the environment in different forms whether it is in the form of solid, liquid, or gas.

Explanation:

Plants take up the minerals like calcium, potassium, nitrogen, sulphur, and others from the soil and utilize them for their survival and growth. These minerals are stored in the flowers, leaves, roots, and other plant parts and these plant parts are consumed by humans and animals. So, inorganic minerals from the soil are converted into organic forms by the plants again the minerals are decomposed into inorganic forms after the death of organisms and again mineral is converted into inorganic form in the soil and these minerals can become the component of the rocks after the sedimentation of the soil.

1) The relationship in between the electrical energy carriesd by the transmission wires and the amount of the heat loss in it is due to the reason that when the electricity is flown through the wires there are some resistance found in these wires which creates a disturbance in the efficient flow of electricty.Also we know that current have an heating effect when it is in motion as due to if a large amount or magnitude of electricity is flown through the transmission wires it will carry a larger heat effected and also due to the resistance is provided by the wires and so the process of heat loss takes place.

2)It is important to minimize current in transmission wires due to minimize the heat loss and resistance on flowing electric current to make the system more efficient

3)Given Resistance = 250 ohms

Electric potential = 150 volts

so we know Power =

volt^2/Resistance =

=(150^2/250)(ohms/volts)

=(22500/250)watt = 90 watt

4)Heat energy (H) = Power(P)×Time(t)

4)Heat energy (H) = Power(P)×Time(t)= (90×2)joules = 180 joules

Hope it helps

Answer:

Explanation:

To find the direction of this vector we need o find the angle that has a tangent of the y-component over the x-component:

[tex]tan^{-1}(\frac{11.1}{-43.0})=-14.5[/tex] but since we are in Q2 we have to add 180 degrees to that angle giving us 165.5 degrees

Answer:

c and d

what i would do is ask the coach if you could take a minute to stretch and as soon as posible jump into the game

Explanation:

i play soccer lol

Answer: i'm pretty sure its  warm up your muscles before playing

Explanation:

if you don't u get hurt.

The distance of the object from the mirror Is = –8 cm

The image distance from the mirror = –1.60cm

The magnification of the image = 0.20

The distance of the object from the mirror can be calculated using the formula below:

magnification= – image distance/ object distance

Substitute the available values into the equation above,

0.20 = – 1.60/ X

Make X the subject of formula,

X = – 1.60/0.20

X = – 8cm

The negative sign indicates that the image is virtual which is formed behind the mirror.

Therefore, the distance of the object from the mirror Is = –8 cm.

Learn more about mirror equations here:

https://brainly.com/question/26257987

Answer:

I think it's B , maybe wrong tho....

Answer:

24000N

Explanation:

The mass of the object stays the same, regardless of its gravitational field strength. But, weight=mass*gravitational field strength.

So, the gravitational field strength on Earth is 10N. 2400*10=24000.

hope this helps

Answer:

The centre of the earth is harder to study than the centre of the sun." Temperatures in the lower mantle the reach around 3,000-3,500 degrees Celsius and the barometer reads about 125 gigapascals, about one and a quarter million times atmospheric pressure.

Explanation:

The atmospheric pressure of earth is 1 atm. As the height decreases, the pressure of the surface increases. Pressure increases about one atmosphere for every 10 meter depth of earth surface and water, hence, the pressure at 5000 km below approximately equal to 500 - 1000 atm.

Pressure of a region is the force acting per unit area. The atmospheric pressure is generated by the gases and dust particles. As the heights from the surface increases, the temperature decreases and pressure also decreases.

Thus, in lower altitudes the pressure will be higher. The standard unit of pressure is  atm. The normal atmospheric pressure is 1 atm. Other units are bar, pascal, torr etc.

Pressure increases about one atmosphere for every 10 meter depth of earth surface and water, hence, the pressure at 5000 km below approximately equal to 500 - 1000 atm.

Find more on pressure:

https://brainly.com/question/29341536

#SPJ3

Answer:

Explanation:

The degree of hotness and coldness of the body is called temperature.

Answer:

Explanation:

frequency=1/time period

50=1/time

time=1/50

time=0.020 s

Answer: A

Explanation:

Answer:

"42 m/s" is the appropriate answer.

Explanation:

Given:

Initial speed of Ball 1,

= 14 m/s

Now,

If the initial speed of ball 1 is doubled, then the speed of ball 2 will be:

⇒ [tex](V_{fx})_2=\frac{2m_1}{m_1+m_2}(v_1x_1)[/tex]

hence,

Doubling ([tex]v_1x_1[/tex]) will double [tex](V_{fx})_2[/tex],

⇒ [tex](V_{fx})_2=2\times 21[/tex]

              [tex]=42 \ m/s[/tex]

Answer:

F= kq1q2÷r^2 r=√9x10^9 x 2.0 x 10^-5 x 5.0x 10^-6 ÷ 1000 ) the ansewer√300