Azim wants to buy a tablet computer that is priced at $255 25. If the sales tax rate on the computer is 8%, how many dollars and cents will Azim spend on the sales tax only?​

Answer:

1875

Step-by-step explanation:

750 x 2.5 = 1,875

This tutorial provides step-by-step instructions on how to perform an independent samples t-test in SPSS and interpret the results.

The tutorial outlines the following steps to conduct an independent samples t-test in SPSS:

Access the Analyze menu.

Select "Compare Means" and then "Independent-Samples T Test."

Drag and drop the dependent variable into the "Test Variable(s)" box and the grouping variable into the "Grouping Variable" box.

Define the groups by clicking on "Define Groups" and inputting the coded values that represent each group.

Click "Continue" and then "OK" to run the test.

The results will be displayed in the SPSS data viewer.

By following these steps, users can conduct an independent samples t-test to compare means between two groups and assess whether there is a statistically significant difference. The result provides information such as the t-value, degrees of freedom, and p-value, which is used to interpret the significance of the difference between the means of the two groups. Researchers can then make conclusions based on the statistical findings from the independent samples t-test.

Learn more about t-test here:

brainly.com/question/32576462

#SPJ11

Step-by-step explanation:

12x^2 + 8x

4x ( 3x + 2)

2x^2 - 16x

2x ( x - 8)

Answer:

972 cubic feet

Step-by-step explanation:

12 by 9 by 7.5

+

1.5 by 9  by 12

Answer:

891 ft³

Step-by-step explanation:

First I'll find the volume of the rectangular prism. (l * w * h)

12 * 9 * 7.5

Multiply 12 by 9 to get 108.

108 * 7.5

Now, multiply 108 by 7.5 to get 810. (756 + 54 = 810)

810

Now for the triangular prism. (1/2(l * w * h))

1/2(12 * 9 * 1.5) (I figured the height was 1.5 since the height of the rectangular prism was 7.5; the entire figure's height was 9)

Multiply 12 by 9 to get 108.

1/2(108 * 1.5)

Multiply 108 by 1.5 to get 162. (108 + 54 = 162)

1/2(162)

Multiply 162 by 1/2 to get 81. (162/2)

81

Now add that to 810 to get 891.

810 + 81

891 ft³

The volume of the garage is 891 ft³.

Answer:

lateral surface area =perimeter of base×height=

={4+7+7+11)×6=174 km²

Step-by-step explanation:

Answer:

red = 28 apples

green = 13 apples

equations:

r + g = 41

r = g + 15

Step-by-step explanation:

r = number of red

g = number of green

r = g + 15 (the number of red apples is 15 more than the number of green apples)

r + g = 41

Substitute the first equation into the second and solve for a numerical value of g

(g + 15) + g = 41

2g + 15 = 41

2g = 26

g = 13

Now solve for a numerical value of r

r = g + 15

r = 13 + 15

r = 28

checking the math:

r + g = 41

28 + 13 = 41

Please lmk if you have any questions.

Answer:

a=25

b=7

Step-by-step explanation:

The 95% confidence interval for the population proportion is approximately (0.7465, 0.7935).

(a) To calculate a 90% confidence interval for the population proportion, we can use the formula:

Confidence Interval = sample proportion ± z * sqrt((sample proportion * (1 - sample proportion)) / sample size)

Given that the sample proportion is p = 0.77 and the sample size is n = 800, we need to find the critical value, z, corresponding to a 90% confidence level.

Using a standard normal distribution table or a statistical software, the critical value for a 90% confidence level is approximately 1.645.

Substituting these values into the formula, we have:

Confidence Interval = 0.77 ± 1.645 * sqrt((0.77 * (1 - 0.77)) / 800)

Calculating the confidence interval, we get:

Confidence Interval = 0.77 ± 0.0191

Therefore, the 90% confidence interval for the population proportion is approximately (0.7509, 0.7891).

(b) Similarly, to calculate a 95% confidence interval, we need to find the critical value corresponding to a 95% confidence level. The critical value is approximately 1.96 for a 95% confidence level.

Using the same formula and substituting the values, we have:

Confidence Interval = 0.77 ± 1.96 * sqrt((0.77 * (1 - 0.77)) / 800)

Calculating the confidence interval, we get:

Confidence Interval = 0.77 ± 0.0235

to learn more about confidence interval click here:

brainly.com/question/29730953

#SPJ11

Answer: A time series graph is useful for representing the frequencies of a data category over a period of several years.

Explanation:                                                                                                           Time series graphs are usually employed when it is critical to examine data values and trends over time. A time series graph displays changes in data over time. It is usually used to depict economic, social, or physical characteristics that are measurable over time.                                                    A time series is a collection of observations or data taken at regular intervals over time and used to track and analyze changes in data over time.

   Time series graphs display data over time on a graph with time on the x-axis and a measured value, such as temperature or height, on the y-axis. The graph can display change trends over time as well as seasonal or other patterns, in addition to providing insight into how data values are changing over time.

Learn more about Time series graphs here https://brainly.com/question/30438476

#SPJ11

Answer:

72 cm

Step-by-step explanation:

It would be multiplied by 8 so the length would become 72 cm

The integrating factor for the given differential equation is |x^2 - 1|.

To find the integrating factor for the given differential equation, we start by rearranging the equation in the form:

dy/dx + (2y)/(x^2 - 1) = (4(x + 1))/(x^2 - 1)

The integrating factor (IF) is given by the exponential of the integral of the coefficient of y, which in this case is (2/(x^2 - 1)). Therefore, the integrating factor IF is:

IF = exp ∫ (2/(x^2 - 1)) dx

To evaluate this integral, we can use a substitution. Let u = x^2 - 1, then du = 2x dx. Substituting this back into the integral, we get:

IF = exp ∫ (1/u) du = exp(ln|u|) = |u|

Since u = x^2 - 1, we have:

IF = |x^2 - 1|

Therefore, the integrating factor for the given differential equation is |x^2 - 1|.

To learn more about differential equations visit : https://brainly.com/question/1164377

#SPJ11

Answer:

[tex]14/50\\[/tex]

Step-by-step explanation:

The equation for sine is sine = opposite/ hypotenuse

The opposite of W is 14 and the hypotenuse the the side across the 90° angle, which is 50.

So, when you set up the equation it should be [tex]14/50[/tex].

By completing the square, the equation in standard form is (x - 2)² + (y + 4)² = 4².

In Mathematics and Geometry, the standard form of the equation of a circle is modeled by this mathematical equation;

(x - h)² + (y - k)² = r²

Where:

From the information provided below, we have the following equation of a circle:

x² - 4x + y² + 8y = -4

x² - 4x + (-4/2)² + y² + 8y + (8/2)² = -4 + (-4/2)² + (8/2)²

x² - 4x + 4 + y² + 8y + 16 = -4 + 4 + 16

(x - 2)² + (y + 4)² = 16

(x - 2)² + (y + 4)² = 4²

Therefore, the center (h, k) is (2, -4) and the radius is equal to 4 units.

Read more on equation of a circle here: brainly.com/question/15626679

#SPJ4

Complete Question:

Complete the square to rewrite the following equation in standard form. x² - 4x + y² + 8y = -4.

Answer:

Selling price of the laptop is $600.

Step-by-step explanation:

Let the sale price of the laptop = $x

Regular price of the laptop = $750

Discount on each computer = 20%

Selling price of the laptop 'x' = 750 - (20% of 750)

                                                = 750 - [tex](\frac{20}{100}\times 750)[/tex]

                                                = 750 - 150

                                                = $600

Therefore, selling price of the laptop is $600.

Answer:

e) yes, symmetric around the y-axis

f) minimum at (0,0)

g) x-intercept at 0

Step-by-step explanation:

for points sorry Answer:

Step-by-step explanation:

Answer:

the answers is A and E  <3

Step-by-step explanation:

i took this test

The set of vectors (b) (-3,0,4), (5,-1,2), (1,1,3) are linearly dependent. The other given sets of vectors in R3 are linearly independent.

Let's review the given sets of vectors in R₃ to determine which ones are linearly dependent.

(a) (4.-1,2), (-4, 10, 2).

To check if the given set is linearly dependent or not, we need to check whether there are non-zero scalars such that their linear combination is equal to

0.a(4,-1,2) + b(-4,10,2) = (0,0,0).

The system of equations can be written as;

4a - 4b = 0-1a + 10b = 00a + 2b = 0.

Clearly, a = b = 0 is the only solution.

So, the set is linearly independent.

(b) (-3,0,4), (5,-1,2), (1, 1,3)

To check if the given set is linearly dependent or not, we need to check whether there are non-zero scalars such that their linear combination is equal to

0.a(-3,0,4) + b(5,-1,2) + c(1,1,3) = (0,0,0).

The system of equations can be written as;

-3a + 5b + c = 00a - b + c = 00a + 2b + 3c = 0

Clearly, a = 2, b = 1, and c = -2 is a solution.

So, the set is linearly dependent.

(c) (8.-1.3). (4,0,1).

To check if the given set is linearly dependent or not, we need to check whether there are non-zero scalars such that their linear combination is equal to

0.a(8,-1,3) + b(4,0,1) = (0,0,0).

The system of equations can be written as;

8a + 4b = 01a + 0b = 0-3a + b = 0.

Clearly, a = b = 0 is the only solution.

So, the set is linearly independent.

(d) (-2.0, 1), (3, 2, 5), (6,-1, 1), (7,0.-2).

To check if the given set is linearly dependent or not, we need to check whether there are non-zero scalars such that their linear combination is equal to

0.a(-2,0,1) + b(3,2,5) + c(6,-1,1) + d(7,0,-2) = (0,0,0)

The system of equations can be written as;

-2a + 3b + 6c + 7d = 00a + 2b - c = 00a + 5b + c - 2d = 0

Clearly, a = b = c = d = 0 is the only solution.

So, the set is linearly independent.

Therefore, The set of vectors (b) (-3,0,4), (5,-1,2), (1,1,3) are linearly dependent. The other given sets of vectors in R₃ are linearly independent.

Learn more about vectors here

brainly.com/question/31328368

#SPJ4

Answer:

40 units

Step-by-step explanation:

For a square, all the sides are equal and the interior angles are equal and all equal to 90. Hence;

m<BOJ = 90 degrees

m<BOJ = 4x - 6

Equating both to get x;

4x - 6 = 90

4x = 90+6

4x = 96

x = 96/4

x = 24

Since all the sides are equal, hence BO = JO = 2x-8

JO = 2x - 8

Substitute x = 24 into JO

JO = 2(24) - 8

JO = 48 - 8

JO = 40

Hence the measure of JO is 40 units

The measure of each angle in the triangle is 24 degrees, 36 degrees, and 120 degrees.

Let's denote the three angles of the triangle as A, B, and C. According to the given ratio of 2:3:10, we can assign the values 2x, 3x, and 10x to angles A, B, and C, respectively, where x is a common factor.

The sum of the angle measures in a triangle is always 180 degrees. Therefore, we can set up the following equation:

2x + 3x + 10x = 180

Simplifying the equation, we get:

15x = 180

Dividing both sides by 15, we find:

x = 12

Now we can substitute x back into the expressions for each angle:

Angle A = 2x = 2(12) = 24 degrees

Angle B = 3x = 3(12) = 36 degrees

Angle C = 10x = 10(12) = 120 degrees

Therefore, the measure of each angle in the triangle is 24 degrees, 36 degrees, and 120 degrees.

Know more about Triangle here:

https://brainly.com/question/2773823

#SPJ11

Answer: B

The surface area of the right cylinder is 140π cubic units or 439.60 cubic units.

Step-by-step explanation:

We have formula to find the surface area of a right cylinder.

Surface area = 2πr(h + r)

Given: r = 5 and h = 9,

Now plug in the value of r and h in the above formula, we get

Surface area = 2π.5 (9 + 5)

= 10π(14)

Surface area = 140π

The value of π = 3.14, when we plug in the value of π, we get

The surface area = 140 × 3.14

= 439.60 cubic units.

Therefore, the surface area of the right cylinder is 140π cubic units or 439.60 cubic units.

Hope this helped!!!

The expression "a > b" is evaluated before the other expressions.

How to evaluate an expression?

Follow the order of operations (PEMDAS/BODMAS). Evaluate the expression following the order of operations or the rules of precedence.

Let's break down the given statement and determine the order of evaluation for each expression:

if (a > b && c == d || a == 10 && b > a * b)

The statement consists of two logical expressions connected by the "&&" and "||" operators. To determine the order of evaluation, we need to consider operator precedence and associativity.

1. Parentheses: As there are no parentheses in the statement, we move on to the next step.

2. "&&" Operator: The "&&" operator has higher precedence than the "||" operator, so expressions connected by "&&" are evaluated before those connected by "||".

The first expression connected by "&&" is "a > b". Let's call this Expression 1.

The second expression connected by "&&" is "c == d". Let's call this Expression 2.

3. "||" Operator: The "||" operator has lower precedence than the "&&" operator.

The first expression connected by "||" is Expression 1 (a > b) && (c == d).

The second expression connected by "||" is "a == 10" && "b > a * b". Let's call this Expression 3.

Now, let's evaluate each expression in the given order:

Expression 1: a > b

Expression 2: c == d

Expression 3: a == 10 && b > a * b

Therefore, the expression evaluated first in the given statement is Expression 1: a > b.

To summarize, in the statement "if (a > b && c == d || a == 10 && b > a * b)", the expression "a > b" is evaluated first.

To know more about expression, refer here:

https://brainly.com/question/28170201

#SPJ4

In summary:

The relation R is reflexive. The relation R is not symmetric. The relation R is antisymmetric. The relation R is transitive.

Let's analyze the properties of the relation R:

Reflexive:

A relation R is reflexive if every element in the set is related to itself. In this case, we need to check if (a, a) belongs to R for every a in the set.

For the given relation R: (a, b) belongs to R if and only if a - b = 0.

Since a - a = 0, (a, a) satisfies the condition and is in R for every a in the set. Therefore, the relation R is reflexive.

Symmetric:

A relation R is symmetric if for every (a, b) belongs to R, (b, a) must also be in R.

For the given relation R: (a, b) belongs to R if and only if a - b = 0.

However, if a - b = 0, it does not imply that b - a = 0. Therefore, the relation R is not symmetric.

Antisymmetric:

A relation R is antisymmetric if for every distinct (a, b) belongs to R, (b, a) cannot be in R.

For the given relation R: (a, b) belongs to R if and only if a - b = 0.

Since a - b = 0 implies b - a = 0, it means that if (a, b) and (b, a) are in R, then a must be equal to b. Thus, for distinct elements a and b, it is not possible for both (a, b) and (b, a) to be in R. Therefore, the relation R is antisymmetric.

Transitive:

A relation R is transitive if for every (a, b) and (b, c) belongs to R, (a, c) must also be in R.

For the given relation R: (a, b) belongs to R if and only if a - b = 0.

If a - b = 0 and b - c = 0, it implies that a - c = 0. Therefore, if (a, b) and (b, c) are in R, then (a, c) is also in R. Thus, the relation R is transitive.

In summary:

The relation R is reflexive.

The relation R is not symmetric.

The relation R is antisymmetric.

The relation R is transitive.

To know more about relation properties:

https://brainly.com/question/32600807

#SPJ4

The false statement among the following statements is: |ez| = |e³|. Here, e is the Euler number, and z is a complex number. Therefore, the correct answer is option (i) |ez| = |e³|.

We know that e^(ix) = cos(x) + i sin(x)

It is also known as Euler's formula, where e is the Euler number, i is the imaginary unit, x is the angle in radians. This formula connects the trigonometric functions with the exponential function. In this question, e is the Euler number, and z is a complex number. So, ez = |ez| × e^(iθ), where θ is the angle of the complex number z from the positive real axis. In the same way, e³ = |e³| × e^(i3θ)Here, the modulus of ez is |ez|, and the modulus of e³ is |e³|. It is not necessary that both will be equal because the value of θ may differ. Hence, the false statement is |ez| = |e³|.

More on Euler number: https://brainly.com/question/30639766

#SPJ11

Answer:

2/11

Step-by-step explanation:

Let's say x = 0.18181818..

Then, 100x = 18.1818181....

so, if you put x in the repeating decimal in 18.1818,

you get the equation,

100x = 18+x

so, 99x = 18

x = 18/99 = 2/11

Answer:

18/100 = 9/50

Answer is 9/50

Do you really think you’re going to give me brainliest lol

Answer:

85 wpm

Step-by-step explanation:

From the scatter plot, we can see the following;

At 20 hours, average typing speed = 34 wpm

At 30 hours, the average typing speed = 40 wpm

At 40 hours, the average typing speed = 51 wpm

At 50 hours, the average typing speed = 65 wpm

Average differences = ((40 - 34) + (51 - 40) + (65 - 51))/3 = 10.3

Approximating to a whole number = 10

Now, we can approximate that at 60 hours, average typing speed = 65 + 10 = 75 wpm

At 70 hours, the average typing speed = 75 + 10 = 85 wpm

Answer:

85 wpm

Step-by-step explanation:

I took this test!

Answer:

answer I have no clue sorry dude

a. Using the z-score, the probability of a randomly chosen mouse having a mass of less than 20.7 grams is approximately 0.2794.

b. The probability that a randomly chosen mouse has a mass more than 21.02g is 0.0985

c.  The probability of a mouse having a mass between 20.65 and 20.95 grams is approximately 0.6474.

d. About 10% of all mice have a mass of less than 20.5649 grams.

a) To find the probability that a randomly chosen mouse has a mass of less than 20.7 grams, we can use the normal distribution.

First, we need to standardize the value of 20.7 grams using the formula: z = (x - μ) / σ, where x is the value, μ is the mean, and σ is the standard deviation.

The z-score for the data is;

z = (20.7 - 20.8) / 0.17 = -0.5882

P = 0.2794

b) To find the probability that a randomly chosen mouse has a mass of more than 21.02 grams, we also need to standardize the value:

z = (21.02 - 20.8) / 0.17 = 1.2941

P = 0.0985

Using the standard normal distribution table or a calculator, we find that the probability corresponding to this z-value is approximately 0.0985.

c) To find the proportion of mice that have a mass between 20.65 and 20.95 grams, we can standardize both values:

For 20.65 grams:

z₁ = (20.65 - 20.8) / 0.17 = -0.8824

For 20.95 grams:

z₂ = (20.95 - 20.8) / 0.17 = 0.8824

Using the standard normal distribution table or a calculator, we can find the probabilities corresponding to these z-values. The probability of a mouse having a mass between 20.65 and 20.95 grams is approximately 0.6474.

d) To find the mass of mice that corresponds to the 10th percentile, we need to find the z-score associated with the 10th percentile. We can use the standard normal distribution table or a calculator to find this value.

The z-score associated with the 10th percentile is approximately -1.2816.

Next, we can use the z-score formula to find the corresponding mass value:

z = (x - μ) / σ

-1.2816 = (x - 20.8) / 0.17

Solving for x, we get:

x = -1.2816 * 0.17 + 20.8 ≈ 20.5649 grams

Therefore, 10% of all mice have a mass of less than 20.5649 grams.

learn more on probability here;

https://brainly.com/question/24756209

#SPJ4