Bromine is a red-brown liquid with a density of 3.10 g/mL. A sample of bromine weighing 88.5 g occupies what volume

Answer: It is causing erosion, landslides, and craters. If this keeps up the ice in the artic will eventually be gone

Explanation:

Answer:

This combination can make a buffer

Explanation:

A buffer is defined as an aqueous mixture of a weak acid and its conjugate base, or vice versa.

In the problem, HF is a weak acid, and its conjugate base is F⁻.

When NaOH reacts with HF, F⁻, Na⁺ and H₂O are produced as follows:

NaOH + HF → F⁻ + Na⁺ + H₂O

As there are initially 0.2mol of HF and 0.1mol NaOH, after the reaction you will have:

0.1mol HF and 0.1mol F⁻. As both, the weak acic and the conjugate base are present:

Answer:

[tex]\boxed {\boxed {\sf x\approx 12.0 \ moles \ HCl}}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter.

[tex]molarity= \frac{moles \ of \ solute}{liters \ of solution}[/tex]

We know the solution has a volume of 7.98 liters and it has a molarity of 1.50 M HCl.

We know 2 values for the variables, but the value for moles of solute is unknown, so we use x.

Substitute the values into the formula.

[tex]1.50 \ mol \ HCl/L=\frac{x}{7.98 \ L}[/tex]

We are trying to solve for x, the moles of solute, so we must isolate the variable. It is being divided by 7.98 liters and the inverse of division is multiplication. Multiply both sides of the equation by 7.98 liters.

[tex]7.98 \ L *1.50 \ mol \ HCl/L=\frac{x}{7.98 \ L} * 7.98 \ L[/tex]

[tex]7.98 \ L *1.50 \ mol \ HCl/L=x[/tex]

The units of liters (L) cancel each other out.

[tex]7.98 *1.50 \ mol \ HCl=x[/tex]

[tex]11.97 \ mol \ HCl=x[/tex]

The original measurements of molarity and volume both have 3 significant figures, so our answer must have the same. For the number we found, that is the tenths place.

The 9 in the hundredth place tells us to round the 1 to a 2. We leave a 0 in the tenths place to ensure there are 3 significant figures.

[tex]12.0 \ mol \ HCl \approx x[/tex]

There are approximately 12.0 moles of solute in the solution.

Answer:

The 40 represents the atomic number and the number of proton in Zirconium. The "Zr" on the tile is the symbol of the elementp

Answer:

I think the answer would be A.

Answer:

The original concentration is "35 mg/ml".

Explanation:

According to the question,

The solution is diluted,

= 1:50

The initial volume,

V1 = 1 ml

Final concentration,

= 0.07 mg

then,

The final volume,

V2 = 500 ml

As we know,

⇒ [tex]V_1N_1=V_2N_2[/tex]

or,

⇒ [tex]N_1=\frac{V_2N_2}{V_1}[/tex]

On substituting the values, we get

⇒       [tex]=\frac{500\times 0.07}{1}[/tex]

⇒       [tex]=\frac{35}{1}[/tex]

⇒       [tex]=35 \ mg/ml[/tex]

A 0.07 mg/mL BHL solution was prepared by performing a 1:500 dilution on a 35 mg/mL solution.

A 1:500 dilution was carried out to prepare a 0.07 mg/mL BHL solution. We can find the concentration of the initial solution using the dilution rule.

It is an equation that relates the concentration and volume of a concentrated and a dilute solution. The mathematical expression is:

C₁ × V₁ = C₂ × V₂

where,

C₁ = C₂ × (V₂/V₁)

C₁ = 0.07 mg/mL × (500/1) = 35 mg/mL

A 0.07 mg/mL BHL solution was prepared by performing a 1:500 dilution on a 35 mg/mL solution.

Learn more about dilution here: https://brainly.com/question/1615979

Answer:

The solution with [OH-] = 3.2x10-3 M will have an [H+] of 3.09x10–12 M.Explanation:

Explanation:

Respuesta: La masa atómica del carbono (C) es 12 g/mol; para el oxígeno (O) es de 16 g/mol. Esto significa que 6.022 x 1023 átomos de carbono pesan 12 gramos. Según esto, el peso molecular del CO2 es: 12 g/mol [C] + 2 x 16 g/mol [O2] = 44 g/mol

Answer:

11

Explanation:

becauase 5 +6

Answer:

In order from left to right, 7 (gamma), 5 (ultraviolet, now continue pattern), 4, 6, 2, 3, 1.

Answer:

[tex]\boxed {\boxed {\sf 0.255 \ mol \ C }}[/tex]

Explanation:

If we want to convert from grams to moles, the molar mass is used. This is the mass of 1 mole. They are found on the Periodic Table as the atomic masses, but the units are grams per mole (g/mol) instead of atomic mass units (amu).

Look up the molar mass of carbon.

Set up a ratio using the molar mass.

[tex]\frac {12.011 \ g \ C}{ 1 \ mol \ C}[/tex]

Since we are converting 3.06 grams to moles, we multiply by that value.

[tex]3.06 \ g \ C*\frac {12.011 \ g \ C}{ 1 \ mol \ C}[/tex]

Flip the ratio. This way, the ratio is still equivalent, but the units of grams of carbon cancel.

[tex]3.06 \ g \ C* \frac{1 \ mol \ C}{12.011 \ g\ C}[/tex]                      

[tex]3.06 * \frac{1 \ mol \ C}{12.011 }[/tex]    

[tex]\frac {3.06}{12.011 } \ mol \ C[/tex]                                

[tex]0.25476646 \ mol \ C[/tex]

The original measurement of grams (3.06) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.

The 7 in the ten-thousandth place tells us to round the 4 up to a 5.

[tex]0.255 \ mol \ C[/tex]

3.06 grams of carbon is approximately 0.255 moles of carbon.

Answer: C2H6O

Explanation: It is C2H6O with a molar mass of 46.07 g/mol.

Answer:

me too

Explanation:

1 becasuevof one vvalence shell

Answer:

1.The substance(s) to the left of the arrow in a chemical equation are called reactants. A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products

2.The substances that go into a chemical reaction are called the reactants, and the substances produced at the end of the reaction are known as the products

3.The law of conservation of mass states that in a chemical reaction, the total mass of reactants is equal to the total mass of products. For example, the mass of sodium plus the mass of chlorine that reacts with the sodium equals the mass of the product sodium chloride.

Answer:

The correct answer is MgCO₃.5H₂O.

Explanation:

Based on the given information,

The mass of hydrate of magnesium carbonate given is 15.67 grams, and the mass of anhydrous magnesium carbonate given is 7.58 grams.

Now the mass of water will be,

= 15.67 grams – 7.58 grams

= 8.09 grams

The molecular mass of magnesium carbonate is 84.32 grams, the moles of MgCO₃ can be determined by using the formula,

Number of moles = Mass/Molecular mass

Moles of MgCO₃ = 7.58/84.32

= 0.0898 moles

Similarly, the number of moles of water will be,

Moles of H₂O = 8.099/18.02

= 0.4489 moles

After getting the values, there is a need to choose the smaller value and use it to divide both the values to get the ratio,

MgCO₃ = 0.0898/0.0898 = 1

H₂O = 0.4489/0.0898 = 4.9 or 5

Thus, the molecular formula for the hydrate will be MgCO₃.5H₂O.

Answer:

Pure water contains no ions.  TRUE

Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O+ ] ions.  TRUE

Explanation:

This is the equilibrium for pure water:

2H₂O  ⇄  H₃O⁺  +  OH⁻          Kw

We see that pure water has no Ions. Pure water can not conduct electricity.

Generally ionized water comes from the water tap.

Another feature of pure water is pH.

Definetely pH of pure water is : 7

As pH = 7, [H₃O⁺] = 1×10⁻⁷

Then, [OH⁻] = 1×10⁻⁷

This is reazonable because Kw is 1×10⁻¹⁴ and Kw = [H₃O⁺] . [OH⁻]

In conclussion:

Pure water contains no ions.  TRUE

Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O+ ] ions.  TRUE

Pure water contains larger amounts of hydroxide [OH-] than hydronium [H3O+] ions.  FALSE

Pure water is an electrolyte. FALSE

Pure water contains smaller amounts of hydroxide [OH-] than hydronium [H3O ] ions. FALSE

Answer:

The correct solution is "[tex]0.480 \ J/g^{\circ}C[/tex]".

Explanation:

Given:

q = 103 J

Mass,

m = 12.6 grams

Temperature,

[tex]T_1=22.4[/tex]

[tex]T_2=39.4[/tex]

[tex]\Delta T=T_2-T_1[/tex]

      [tex]=39.4-22.4[/tex]

      [tex]=17^{\circ}C[/tex]

Now,

⇒  [tex]C=\frac{q}{m\times \Delta T}[/tex]

⇒      [tex]=\frac{103}{12.6\times 17}[/tex]

⇒      [tex]=\frac{103}{214.2}[/tex]

⇒      [tex]=0.480 \ J/g^{\circ}C[/tex]

Answer:

The correct answer is 1.21 L.

Explanation:

Based on the given information, the reaction will be,

CS2 (l) + 3Cl2 (g) ⇒ CCl4 (l) + S2Cl2 (l)

By using the standard values of the substances, the standard enthalpy of the reaction is,

ΔH° = [(-139.5) + (-58.5) – 0 – (87.3)] kJ/mol

= -285.3 kJ/mol

The amount of heat evolved for 3 moles of chlorine reacted us 285.3 kJ.

Now the number of moles of chlorine needed to react to produce 5.00 kJ is,

= 5.00 kJ × 3 mol Cl2/285.3 kJ

= 0.0526 mol Cl2

Now the volume of chlorine gas at 27degree C and 812 mmHg will be,

Volume = 0.0526 mol Cl2 × 0.0821 Latm/mol K × 300 K/ 1.07 atm

= 1.21 L

Answer:

Veins

Explanation:

Veins carry blood to the heart while arteries carry away from the heart

Answer:

Five general properties of organic  compounds:

Answer:

24.24 g

Explanation:

First we calculate how many moles are there in 300 mL of a 0.234 M solution, using the definition of molarity:

Converting 300 mL to L ⇒ 300 mL / 1000 = 0.300 L

Then we convert 0.78 moles of NH₄F into grams, using its molar mass:

Answer:

Beta decay

Explanation:

Radioactive decay changes one nucleus to another. The type of decay that a particular nucleus undergoes depends on the number of neutrons and protons present in such nucleus.

Radioactive decay tends to lead to the attainment of a stable neutron/proton ratio.

The decay mode for cesium-137 is beta decay. The beta decay of cesium-137 yields Barium-137.

Beta decay decreases the neutron - proton ratio.

Answer: The correct statements about thermal conductivity are:

Explanation:

The rate at which transfer of heat takes place from one object to another by conduction over a unit cross section area of a material is called thermal conductivity.

Hence, more is the distance between atoms of a substance less will be its thermal conductivity. This is because more is the space between molecules of a substance more will be their random motion due to which there will be less effective energy transport.

The thermal conductivity of metals is very high than liquids.

Also, the thermal conductivity of solids is generally higher than that of liquids.

As gases have more space between its molecules so they have less thermal conductivity.

Thus, we can conclude that the correct statements about thermal conductivity are:

Answer:

I think it's 1.D

2.C

3.C

my apologies if it's incorrect

Answer:

(a): The expression of equilibrium constant is [tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]

(b): The equation to solve the concentration of NO is [tex][NO]=\sqrt{K_{eq}\times [N_2]\times [O_2]}[/tex]

(c): The concentration of NO is 0.0017 M.

Explanation:

The equilibrium constant is defined as the ratio of the concentration of products to the concentration of reactants raised to the power of the stoichiometric coefficient of each. It is represented by the term [tex]K_{eq}[/tex]

(a):

The given chemical equation follows:

[tex]N_2+O_2\rightarrow 2NO[/tex]

The expression for equilbrium constant will be:

[tex]K_{eq}=\frac{[NO]^2}{[N_2][O_2]}[/tex]

(b):

The equation to solve the concentration of NO follows:

[tex][NO]=\sqrt{K_{eq}\times [N_2]\times [O_2]}[/tex]            ......(1)

(c):

Given values:

[tex]K_{eq}=1.2\times 10^{-4}[/tex]

[tex][N_2]_{eq}=0.166M[/tex]

[tex][O_2]_{eq}=0.145M[/tex]

Plugging values in equation 1, we get:

[tex][NO]=\sqrt{(1.2\times 10^{-4})\times 0.166\times 0.145}[/tex]

[tex][NO]=\sqrt{2.88\times 10^{-6}}[/tex]

[tex][NO]=0.0017 M[/tex]

Hence, the concentration of NO is 0.0017 M.

Answer:

It would test positive.