the change in entropy for the vaporization of xe at its boiling point of -107 °c given that ∆vaph = 12.6 kj/mol is option 4: 75.9 J/K•mol.
How is the entropy of vaporisation calculated from the boiling point?The heat of vaporisation divided by the boiling point gives the entropy of vaporisation the following value: Trouton's rule states that most liquids have similar values for the entropy of vaporisation (at standard pressure). Several sources list the usual value as 85 J/(mol K), 88 J/(mol K), and 90 J/(mol K).
How come we compute entropy?Entropy is a measurement of a system's disorder or randomness. Entropy cannot be quantified in absolute terms since it depends on the system's starting and ending states. To calculate the entropy change, you must take into account the differences between the beginning and end states.
To know more about vaporization visit:-
https://brainly.com/question/14578189
#SPJ1
4 alkenes are formed from the E2 reaction of 3-bromo-2,3-dimethylpentane and methoxide ion. Draw the structures of the alkene products and rank them according to the amount that would be formed.
The E2 reaction of 3-bromo-2,3-dimethylpentane and methoxide ion would result in the formation of four different alkenes.
The structures of these alkenes would be as follows:
1. 2-methyl-2-pentene
2. 2,3-dimethyl-2-pentene
3. 2-methyl-1-pentene
4. 3-methyl-1-pentene
To rank these alkenes according to the amount that would be formed, we need to consider the relative stability of the products. In general, more substituted alkenes are more stable than less substituted alkenes due to the increased number of carbon-carbon bonds and the resulting increase in bond strength. Based on this, the ranking of the alkene products would be Bromination :
1. 2,3-dimethyl-2-pentene
2. 2-methyl-2-pentene
3. 3-methyl-1-pentene
4. 2-methyl-1-pentene
This ranking is based on the fact that 2,3-dimethyl-2-pentene is the most highly substituted alkene, followed by 2-methyl-2-pentene, 3-methyl-1-pentene, and 2-methyl-1-pentene. Therefore, 2,3-dimethyl-2-pentene would be the major product of the E2 reaction, followed by 2-methyl-2-pentene, 3-methyl-1-pentene, and 2-methyl-1-pentene in decreasing amounts.
Learn more about Bromination here
https://brainly.com/question/31033378
#SPJ11
What are the missing coefficients for this equation: Al2(SO4)3 + KOH —> Al(OH)3 + K2SO4
The following nuclear reaction is an example of 226 88 Ra rightarrow 4 2 He + 222 86 Rn alpha decay. beta decay. gamma decay. an impossible reaction. Moving to another question will save this response.
Certain radioactive nuclides undergo one-step nuclear decay to become stable nuclei. For instance, 60Co, which is unstable, immediately decays to 60Ni, which would be stable.
What is the radon-222 alpha decay equation?The parent atom's mass number is decreased by 4, and its atomic number is decreased by 2. Organization considers, 22286Rn 42He+21884Po 866 222 R ng 2 4 H e + 84 218 P o is the nuclear equation explaining the alpha degradation of 22286Rn 1986 222 R n.
What distinguishes beta decay, gamma decay, and alpha decay?The nucleus loses h+ ions during alpha decay. The nucleus either acquires or loses a proton during beta decay. There is no proton change in gamma decay.
To know more about proton visit :
https://brainly.com/question/1252435
#SPJ1
Draw the structure of the diacetylferrocene you would obtain if ferrocene were diacetylated.
Diacetylferrocene is a yellow crystalline solid that is sparingly soluble in water but soluble in organic solvents.
Ferrocene is an organometallic compound consisting of two cyclopentadienyl rings bound to an iron atom. Diacetylation of ferrocene involves the addition of two acetyl groups (-COCH₃) to the two cyclopentadienyl rings. The reaction is typically carried out using acetic anhydride and a strong acid catalyst, such as sulfuric acid.
The product of diacetylation of ferrocene is diacetylferrocene. Diacetylferrocene is a yellow crystalline solid that is sparingly soluble in water but soluble in organic solvents such as acetone, chloroform, and ether. The diacetylation reaction occurs at the five-membered cyclopentadienyl rings, resulting in two acetyl groups being added to each ring. This results in a molecule with two adjacent carbonyl groups (C=O) attached to each ring.
The structure of diacetylferrocene can be represented as follows:
O
|
H₃C-C=O
|
Fe C=O
|
H₃C-C=O
|
O
The iron atom is sandwiched between the two cyclopentadienyl rings, and the two acetyl groups are attached to each ring, as shown. The carbonyl groups are polar, and the molecule as a whole is moderately polar due to the iron atom. Diacetylferrocene is often used as a model compound in organometallic chemistry and is a useful starting material for the synthesis of other ferrocene derivatives.
For more such questions on Diacetylferrocene.
https://brainly.com/question/30664342#
#SPJ11
Balance the following redox equations by the half-reaction method:
Br2->BrO3- → Br- (in basic solution)
S2O3^2-→ I2->I-+ S4O6^2-
The balanced redox equation is: [tex]2Br_2 + 2S_2O_3^{2-} + 4OH^- \rightarrow 2Br^- + 2I_2 + S_4O_6^{2-} + 4H_2O[/tex] .The half-reaction method is used to balance redox equations.
What is redox?Redox stands for reduction-oxidation reactions, which are a type of chemical reaction in which electrons are exchanged between two substances. These reactions are essential to many biological and physical processes, such as respiration, photosynthesis, and corrosion. In a redox reaction, one molecule is reduced (gaining electrons) and another is oxidized (losing electrons).
The first step is to break the reaction into two separate half-reactions: oxidation and reduction.
Oxidation: [tex]Br_2 \rightarrow BrO^{3-[/tex]
Reduction: [tex]S_2O_3^2 \rightarrow I_2 \rightarrow I^-[/tex]
Next, the oxidation and reduction half-reactions must be balanced separately for atoms other than oxygen and hydrogen. This includes the [tex]Br_2, I_2, and S_2O_3^{2-.[/tex]
[tex]Br_2 \rightarrow 2BrO_{3-[/tex]
[tex]S_2O_3^2 \rightarrow 2I_2[/tex]
Next, the oxygen and hydrogen atoms must be balanced. This can be done by adding water molecules to the oxidation and reduction half-reactions.
[tex]Br_2 + 2OH\rightarrow2BrO_{3-} + 2H_2O[/tex]
[tex]2S_2O_3^{2-} + 4OH \rightarrow 2I_2 + S_4O_6^{2-} + 4H_2O[/tex]
Finally, the two half-reactions must be combined, taking the number of electrons into account. The oxidation half-reaction has two electrons, and the reduction half-reaction has four electrons. To ensure both half-reactions have the same number of electrons, the oxidation half-reaction must be multiplied by two.
[tex]2Br_{2+} 4OH \rightarrow 4BrO_{3-} + 4H_2O\\ 2S_2O_3^{2-} + 4OH \rightarrow 2I_2 + S_4O6^{2-} + 4H_2O[/tex]
The balanced equation is:
[tex]2Br_2 + 2S_2O_3^{2-} + 4OH^- \rightarrow 2Br^- + 2I_2 + S_4O6^{2-} + 4H_2O[/tex]
To learn more about redox
https://brainly.com/question/21851295
#SPJ4
What is the change in internal energy (Delta E) when a system is heated with 35 J of energy while it does 15 J of work?A. +50 JB. -20 JC. +20 JD. +35 KE. -50 J
The answer is +20J. The change in internal energy (Delta E) can be calculated using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.
The first law of thermodynamics is a fundamental principle in the field of thermodynamics that states that energy cannot be created or destroyed, but it can be converted from one form to another. This law is also known as the law of conservation of energy.Therefore, the answer is C. +20 J.
To learn more about internal energy please visit:
https://brainly.com/question/14668303
#SPJ11
pick an appropriate solvent(s) from table to dissolve each of the following substances. Common Polar Solvents Common Nonpolar Solvents water (H2O) hexane (C6H12) acetone (CH3COCH3) diethyl ether (CH3CH2OCH2CH3) methyl alcohol (CH3OH) toluene (C7H8) Part A glucose (polar)
Part B salt (ionic) Part C vegetable oil (nonpolar) Part D sodium nitrate (ionic)
Part A: Glucose (polar) Appropriate solvent: Water (H2O),Part B: Salt (ionic) Appropriate solvent: Water (H2O),Part C: Vegetable oil (nonpolar) Appropriate solvent: Hexane (C6H12),Part D: Sodium nitrate (ionic) Appropriate solvent: Water (H2O)
Hi! I'd be happy to help you choose appropriate solvents for each substance.
Part A: Glucose (polar)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents dissolve polar substances. Water is a polar solvent and can dissolve glucose, which is also polar.
Part B: Salt (ionic)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents are also effective at dissolving ionic substances. Water, being a polar solvent, can dissolve salt.
Part C: Vegetable oil (nonpolar)
Appropriate solvent: Hexane (C6H12)
Explanation: Nonpolar solvents dissolve nonpolar substances. Hexane is a nonpolar solvent and can dissolve vegetable oil, which is nonpolar.
Part D: Sodium nitrate (ionic)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents can dissolve ionic substances. Water, as a polar solvent, can dissolve sodium nitrate.
learn more about ionic here
https://brainly.com/question/14614762
SPJ11
For the following compound, rank the nitrogens from most basic (#1) to least basic. For each one give the reason for your decision and estimate a pKa. NH NH2
The compound given is hydrazine ([tex]N_{2}H_{4}[/tex]), which has two nitrogen atoms. In order to rank them from most basic to least basic, we need to consider the electron-donating ability of the substituents attached to them.
The nitrogen with two hydrogen atoms ([tex]NH_{2}[/tex]) is more basic than the nitrogen with one hydrogen atom (NH) because it has a greater ability to donate electrons due to the presence of two electron-donating hydrogen atoms. Therefore, [tex]NH_{2}[/tex] is the most basic nitrogen (#1).
On the other hand, the nitrogen with one hydrogen atom (NH) is less basic than [tex]NH_{2}[/tex] because it has only one electron-donating hydrogen atom. Therefore, NH is the second most basic nitrogen.
Both nitrogens in hydrazine can donate electrons to form a bond with a proton, but [tex]NH_{2}[/tex] is the most basic due to the presence of two hydrogen atoms. The estimated pKa for [tex]NH_{2}[/tex] is around 9-10, while the estimated pKa for NH is around 7-8.
To know more about hydrogen atoms, refer here:
https://brainly.com/question/29913273#
#SPJ11
select the nitrogen and hydrogen orbitals that overlap to form each n−h σ bond in nh3 . it may be useful to consult the periodic table. nitrogen orbital: hydrogen orbital:
The nitrogen and hydrogen orbitals that overlap to form each N-H σ bond in NH₃ are: nitrogen's 2p orbital and hydrogen's 1s orbital.
In NH₃ (ammonia), the nitrogen atom is the central atom bonded to three hydrogen atoms. Nitrogen, in the second period of the periodic table, has 2s and 2p orbitals in its valence shell. Nitrogen has five valence electrons, which occupy one 2s and three 2p orbitals. Hydrogen, in the first period, has one valence electron occupying the 1s orbital.
When NH₃ forms, the nitrogen atom hybridizes its orbitals, creating three sp3 hybrid orbitals that will form sigma (σ) bonds with the hydrogen atoms.
Each hydrogen atom overlaps its 1s orbital with one of nitrogen's sp3 orbitals, forming a strong σ bond. This process results in the formation ofNH₃, with a trigonal pyramidal molecular geometry and a bond angle of approximately 107.3 degrees between each N-H bond.
To know more about valence electron click on below link:
https://brainly.com/question/28977387#
#SPJ11
The nitrogen and hydrogen orbitals that overlap to form each N-H σ bond in NH₃ are: nitrogen's 2p orbital and hydrogen's 1s orbital.
In NH₃ (ammonia), the nitrogen atom is the central atom bonded to three hydrogen atoms. Nitrogen, in the second period of the periodic table, has 2s and 2p orbitals in its valence shell. Nitrogen has five valence electrons, which occupy one 2s and three 2p orbitals. Hydrogen, in the first period, has one valence electron occupying the 1s orbital.
When NH₃ forms, the nitrogen atom hybridizes its orbitals, creating three sp3 hybrid orbitals that will form sigma (σ) bonds with the hydrogen atoms.
Each hydrogen atom overlaps its 1s orbital with one of nitrogen's sp3 orbitals, forming a strong σ bond. This process results in the formation ofNH₃, with a trigonal pyramidal molecular geometry and a bond angle of approximately 107.3 degrees between each N-H bond.
To know more about valence electron click on below link:
https://brainly.com/question/28977387#
#SPJ11
A copper forceps that has a mass of 500 g was accidentally left on a heating mantle until
it had a temperature of 35 ᵒC. A student then placed the forcep in 70 g of water at 22 ᵒC
to cool it off. Calculate the specific heat capacity of the copper forcep if the final
temperature of the water was 27 ᵒC. (Specific heat capacity of water is 4. 18 J/°C. G).
After calculating and analyzing the given question the specific heat capacity of the copper forcep is 0.39 J/g°C
The specific heat capacity of copper is 0.385 kJ/ (kg•K) .
a copper forceps with a mass of 500 g can be evaluated using the given formula
The total heat lost by the copper forceps = the total heat gained by water
There are two possible expressions that we need to find before initiating with finding the specific heat capacity
Heat lost by copper forceps = mass of copper forceps * specific heat capacity of copper * (final temperature - initial temperature)
Heat gained by water = mass of water * specific heat capacity of water * (final temperature - initial temperature)
Here, mass of copper forceps = 500 g
Specific heat capacity of water = 4.18 J/°C g
Mass of water = 70 g
Initial temperature of water = 22 °C
Final temperature of water = 27 °C
Staging the values in the given formula
500 x c x (35 - T)
here
c = specific heat capacity of copper forceps
T = initial temperature of copper forceps
finding the value of c
c = 70 * 4.18 * (27 - 22)
c = 0.39 J/g°C
After calculating and analyzing the given question the specific heat capacity of the copper forceps is 0.39 J/g°C
To learn more about specific heat capacity,
https://brainly.com/question/21406849
#SPJ4
calculate the average moles of h2so4 used to reach the equivalence point.
The average moles of H2SO4 used to reach the equivalence point in this example is 0.015 moles.
To calculate the average moles of H2SO4 used to reach the equivalence point, you need to know the volume of H2SO4 added and its concentration. Once you have this information, you can use the formula:
moles = concentration x volume
You need to calculate the moles of H2SO4 used at each point before and after the equivalence point and take the average of these values. The equivalence point is the point at which the moles of H2SO4 added equal the moles of the substance being titrated.
For example, if you added 25 mL of 0.1 M H2SO4 to a solution containing a substance with an unknown concentration until you reached the equivalence point, you would need to measure the volume of H2SO4 added at several points during the titration. Let's say you measured the following volumes and calculated the corresponding moles of H2SO4:
- 5 mL added: 0.005 moles
- 10 mL added: 0.01 moles
- 15 mL added: 0.015 moles
- 20 mL added: 0.02 moles
- 25 mL added: 0.025 moles
To find the average moles of H2SO4 used, you would add up all the moles and divide by the number of measurements taken:
(0.005 + 0.01 + 0.015 + 0.02 + 0.025) / 5 = 0.015 moles
Therefore, the average moles of H2SO4 used to reach the equivalence point in this example is 0.015 moles.
Learn more about moles here:
https://brainly.com/question/26416088
#SPJ11
balanced equations for the fischer esterification (methyl 3-nitrobenzoate):
The balanced equation for the Fischer esterification of methyl 3-nitrobenzoate is:
3-nitrobenzoic acid + methanol + sulfuric acid --> methyl 3-nitrobenzoate + water
The balanced chemical equation is as follows:
[tex]C7H5NO4 + CH3OH + H2SO4 --> C8H7NO4CH3 + H2O[/tex]
In this reaction, 3-nitrobenzoic acid reacts with methanol in the presence of sulfuric acid as a catalyst to form methyl 3-nitrobenzoate and water. It is a classic example of an esterification reaction, where an alcohol and carboxylic acid react to form an ester and water.
Learn more about nitrobenzoate here:
https://brainly.com/question/30889218
#SPJ11
Answer the following questions based on the chemical reaction shown below.
2AgNO3(aq) + Mg12(aq) -- 2Agl(s) + Mg(NO3)2(aq)
1) Write down the Net lonic Equation (NIE). USE semi-colon () to separate the reactants from the product.
2) Identify all the Spectator lon/s.
1) The Net Ionic Equation (NIE) for the given chemical reaction is:
Ag⁺(aq) + I⁻(aq) -> AgI(s); this is obtained by removing the spectator ions.
2) The Spectator Ions are: NO₃⁻(aq) and Mg²⁺(aq), as they do not participate in the reaction.
To find the NIE, we first need to break the compounds into their constituent ions:
2AgNO₃(aq) -> 2Ag⁺(aq) + 2NO₃⁻(aq)
MgI₂(aq) -> Mg²⁺(aq) + 2I⁻(aq)
Now, we write the overall ionic equation:
2Ag⁺(aq) + 2NO₃⁻(aq) + Mg²⁺(aq) + 2I⁻(aq) -> 2AgI(s) + Mg²⁺(aq) + 2NO₃⁻(aq)
Next, remove the spectator ions (NO₃⁻ and Mg²⁺) that appear on both sides of the equation:
Ag⁺(aq) + I⁻(aq) -> AgI(s)
To know more about chemical reaction click on below link:
https://brainly.com/question/22817140#
#SPJ11
Determine the solubility for CuC2O4(s) in pure water. Ksp for is 2.9 × 10-8.
A.0.0083 g L-1, B. 0.069 g L-,1, C. 0.026 g L-1, D. 0.18 g L-1, E.0.0036 g L-1
The solubility of [tex]CuC_2O_4[/tex](s) in pure water is 0.0083 g [tex]L^{-1}[/tex]. The correct option is A.
To determine the solubility of [tex]CuC_2O_4[/tex](s) in pure water, we need to use the Ksp value provided. The balanced dissociation equation for [tex]CuC_2O_4[/tex](s) is:
[tex]CuC_2O_4[/tex](s) ⇌ [tex]Cu^{2}[/tex]+ (aq) + [tex]C_2O_4^{2-}[/tex] (aq)
Since there is a 1:1 ratio between the ions, we can represent the solubility of [tex]CuC_2O_4[/tex](s) as 's'. Therefore:
Ksp = [[tex]Cu^{2+}[/tex]][[tex]C_2O_4^{2-}[/tex]] = s * s = [tex]s^2[/tex]
Given that Ksp = 2.9 × [tex]10^{-8}[/tex], we can find the solubility 's':
[tex]s^2[/tex] = 2.9 × [tex]10^{-8}[/tex]
s = √(2.9 × [tex]10^{-8}[/tex]) = 5.39 × [tex]10^{-5}[/tex] mol [tex]L^{-1}[/tex]
To convert this into grams per liter (g [tex]L^{-1}[/tex]), we need to multiply the molar solubility by the molar mass of [tex]CuC_2O_4[/tex]:
Molar mass of [tex]CuC_2O_4[/tex] = 63.5 (Cu) + 24.01 x 2 (C) + 16 x 4 (O) = 159.62 g [tex]mol^{-1}[/tex]
Solubility (g [tex]L^{-1}[/tex]) = (5.39 × [tex]10^{-5}[/tex] [tex]mol L^{-1}[/tex]) × (159.62 g [tex]mol^{-1}[/tex]) = 0.0086 g [tex]L^{-1}[/tex]
The solubility of [tex]CuC_2O_4[/tex](s) in pure water is closest to option A (0.0083 g [tex]L^{-1}[/tex]).
For more such questions on Solubility.
https://brainly.com/question/23898752#
#SPJ11
A metal object with a mass of 21. 2g is heated to 97 degrees Celsius and then transferred to an insulated container containing 86. 0g of water at 20. 5 degrees Celsius. The water temperature rises and the temperature of the metal object falls until they both reach the same final temperature of 23. 5 degrees Celsius. What is the specific heat of this metal object?
After calculating and investigating the evaluated specific heat capacity of the given metal for the required question is 0.385 J/g°C
The specific heat capacity of a metal could be evaluated using the formula
Q = m x c x ΔT
here
Q = heat lost by,
m = mass of the sample,
c = specific heat capacity of the given metal,
ΔT = change in temperature.
given,
mass of the metal object 21.2g which was heated to 97°C then send to an insulated vessel having 86.0g of water at 20.5°C.
The given water temperature rises reach the same final temperature of 23.5°C.
We have to calculate Q
Q metal = -Q water
m metal x c metal x ΔTmetal = -m water x c water x ΔTwater
here
ΔTmetal = 23.5 – 97
= -73.5°C
ΔTwater = 23.5 - 20.5
= 3°C.
Staging the values in the given formula
(21.2g) x c metal x (-73.5°C)
= -(86.0g) x (4.184) x (3°C)
Calculating concerning c metal
c metal = 0.385 J/g°C
After calculating and investigating the evaluated specific heat capacity of the given metal for the required question is 0.385 J/g°C
To learn more about specific heat capacity,
https://brainly.com/question/27991746
#SPJ4
0.110 mol of octane is allowed to react with 0.750 mol of oxygen. which is the limiting reactant?
the limiting reactant is the octane, and the oxygen is in excess.
To determine the limiting reactant, we need to compare the amount of product that can be formed from each reactant. The balanced chemical equation for the combustion of octane with oxygen is:
2 C8H18 + 25 O2 → 16 CO2 + 18 H2O
According to the balanced equation, 2 moles of C8H18 react with 25 moles of O2 to produce 16 moles of CO2 and 18 moles of H2O. Therefore, the stoichiometric ratio of C8H18 to O2 is 2:25.
Using the given amounts of octane and oxygen, we can calculate how many moles of each reactant are available:
- Moles of octane = 0.110 mol
- Moles of oxygen = 0.750 mol
To determine the limiting reactant, we need to calculate how many moles of each reactant would be required to fully react with the other reactant. Based on the stoichiometric ratio, 2 moles of C8H18 react with 25 moles of O2. Therefore, to fully react with 0.750 mol of O2, we would need:
(2/25) x 0.750 mol = 0.060 mol of C8H18
Similarly, to fully react with 0.110 mol of C8H18, we would need:
(25/2) x 0.110 mol = 1.375 mol of O2
Comparing the moles of each reactant available to the moles required to fully react with the other reactant, we can see that:
- The amount of oxygen (0.750 mol) is greater than the amount required to fully react with the available octane (0.060 mol).
- The amount of octane (0.110 mol) is less than the amount required to fully react with the available oxygen (1.375 mol).
Therefore, the limiting reactant is the octane, and the oxygen is in excess.
Visit to know more about Limiting reactant:-
brainly.com/question/14222359
#SPJ11
A single myosin motor domain can generate a lifting force of approximately 4 piconewtons, or 4 PN. How many times its "body weight" can a myosin motor domain lift?
A single myosin motor domain can lift its own body weight up to 4000 times.
A myosin motor domain is an individual motor protein, made up of a head and a tail that works together as a molecular machine to generate a lifting force. The average myosin motor domain has a molecular weight of around 55 kilodaltons, which is roughly equivalent to 55,000 atomic mass units (amu).
This means that a single myosin motor domain can generate a lifting force of approximately 4 piconewtons (4 PN). To put this into perspective, the lifting force of a myosin motor domain is roughly equivalent to the weight of a small paper clip. Therefore, a single myosin motor domain can lift its own body weight up to 4000 times.
know more about myosin motor here
https://brainly.com/question/31447717#
#SPJ11
Estimate the temperature increase in a rubber band when extended to ? = 8 at 20°C. Assume the heat capacity, C, is 2 J/g-K and ? = 1 g/cm?
To estimate the temperature increase in a rubber band when extended to ? = 8 at 20°C, we need to use the formula Q = mC?T, where Q is the heat absorbed by the rubber band, m is the mass of the rubber band, C is the heat capacity, ?T is the change in temperature.
First, we need to calculate the mass of the rubber band. We know that the density of rubber is ? = 1 g/cm?, and the volume of the rubber band when extended to ? = 8 is:
V = ?r²h = ?(0.4 cm)²(8 cm) = 1.01 cm³
Therefore, the mass of the rubber band is:
m = ?V = 1 g
Now, we can calculate the heat absorbed by the rubber band. When a rubber band is extended, it absorbs energy in the form of work done on it. The work done is:
W = F?x = k(?)?x²/2
where F is the force applied to the rubber band, ?x is the extension, and k(?) is the spring constant of the rubber band. For simplicity, let's assume that the force required to extend the rubber band is constant and equal to 1 N. Then:
k(?) = F/?x = 1/(8/100) = 12.5 N/m
The work done on the rubber band is:
W = k(?)?x²/2 = (12.5 N/m)(0.08 m)²/2 = 0.04 J
This work is converted into heat, which is absorbed by the rubber band. Therefore, Q = W = 0.04 J.
Finally, we can calculate the change in temperature of the rubber band using the formula:
?T = Q/(mC) = 0.04 J/(1 g)(2 J/g-K) = 0.02 K
Therefore, the estimated temperature increase in the rubber band when extended to ? = 8 at 20°C is 0.02 K.
To estimate the temperature increase in a rubber band extended to a stretch ratio (?) of 8 at 20°C, you need to use the provided information: the heat capacity (C) is 2 J/g-K, and the mass per unit length (?) is 1 g/cm. However, we do not have enough information to provide an accurate estimate. We would need to know the work done on the rubber band or any other energy-related parameter to calculate the temperature increase.
Visit here to learn more about temperature brainly.com/question/15267055
#SPJ11
How much silver was in the solution if all of the silver was removed as Ag metal by electrolysis for 0.40 hr with a current of 1.00 mA (1 mA = 10-3 A)?
The amount of silver that was in the solution before electrolysis was 1.61 x 10^{-3} g.
How does electrolysis work?When an electric current is sent through a substance, electrolysis, a chemical reaction, takes place. As a substance undergoes a chemical reaction, an electron is either gained or lost.
In order to respond to this query, we must apply Faraday's law of electrolysis, which has the following equation:
moles of substance = (electric charge / Faraday's constant)
where the Faraday's constant, which equals 96,485 C/mol e-, measures the amount of electric charge per mole of electrons.
Now, we want to find the amount of silver
Calculate the amount of electric charge;
electric charge = current x time
electric charge = 0.001 A x (0.40 hr x 3600 s/hr) = 1.44 C
Using Faraday's constant, convert the electric charge to moles of electrons:
moles of electrons = electric charge / Faraday's constant
= 1.44 C / 96,485 C/mol e-
= 1.49 x 10^{-5} mol e-
moles of Ag+ = moles of electrons = 1.49 x 10^{-5} mol
The mass of Ag present initially:
mass of Ag = moles of Ag+ x molar mass of Ag
= 1.49 x 10^{-3} mol x 107.87 g/mol
= 1.61 x 10^{-3} g
To know more about the electrolysis visit:
https://brainly.com/question/12994141
#SPJ1
discuss the effects of charge on conductivity?
Discuss the expected effects of the type of ions (monoatomic vs polyatomic) on conductivity?
The type of ions, whether monoatomic or polyatomic, can influence conductivity due to differences in size, mass, and charge distribution.
The effects of charge on conductivity can be explained through two primary factors: the concentration of ions and the mobility of ions.
1. Concentration of ions: Higher concentrations of ions typically lead to greater conductivity, as more charged particles are available to carry electrical current.
2. Mobility of ions: Ions with higher mobility, meaning they can move more easily through a medium, contribute to greater conductivity.
Regarding the type of ions (monoatomic vs polyatomic) and their effects on conductivity:
Monoatomic ions are single atoms that carry a positive or negative charge, while polyatomic ions consist of two or more atoms bonded together and carrying a net charge. The differences in size, mass, and charge distribution between monoatomic and polyatomic ions can impact conductivity.
1. Size and mass: Polyatomic ions are generally larger and heavier than monoatomic ions. This can lead to lower mobility, as they may face more resistance when moving through a medium, potentially decreasing conductivity.
2. Charge distribution: In polyatomic ions, the charge is distributed across multiple atoms, while in monoatomic ions, the charge is concentrated on a single atom. This charge distribution may affect the interaction between ions and the medium, impacting the conductivity.
In summary, the effects of charge on conductivity depend on the concentration and mobility of ions. The type of ions, whether monoatomic or polyatomic, can influence conductivity due to differences in size, mass, and charge distribution.
To learn more about monoatomic visit;
https://brainly.com/question/29143691
#SPJ11
Devise a procedure to separate the components in a mixture containing lead carbonate, sodium chloride, and 1.4-dichlorobenzene. Use a flow diagram to illustrate each step.
A procedure and a flow diagram are illustrated according to the chemical reaction.
To separate the components in the mixture, the following procedure can be followed:
Dissolve the mixture in water to obtain a solution.Add dilute hydrochloric acid to the solution to precipitate lead carbonate as a solid.Filter the mixture to obtain the lead carbonate solid.Add sodium hydroxide to the filtrate to precipitate sodium chloride as a solid.Filter the mixture to obtain the sodium chloride solid.Add a nonpolar solvent like ether to the filtrate to extract the 1,4-dichlorobenzene.Separate the ether layer from the aqueous layer.Evaporate the ether to obtain pure 1,4-dichlorobenzene.The flow diagram for the above procedure is as follows:
A mixture containing lead carbonate, sodium chloride, and 1,4-dichlorobenzene → Dissolve in water → Add dilute HCl → Filter → Lead carbonate solid obtained → Filtrate → Add NaOH → Filter → Sodium chloride solid obtained → Filtrate → Add ether → Extract 1,4-dichlorobenzene → Separate ether layer → Evaporate ether → Pure 1,4-dichlorobenzene obtained.
Learn More about flow diagrams
https://brainly.com/question/30425877
#SPJ4
Given that ΔHvap is 52.6 kJ/mol, and the boiling point is 83.4oC, if one mole of this substance is vaporized at 1.00 atm, determine the ΔSsurr. The answer should be in J/K*mol.
The ΔSsurr is: -147.46 J/K*mol.
The given problem requires the determination of the change in entropy of the surroundings (ΔSsurr) when one mole of the substance is vaporized at a pressure of 1.00 atm. The given information is ΔHvap (enthalpy of vaporization) = 52.6 kJ/mol and the boiling point is 83.4°C. To solve the problem, we need to use the formula:
ΔSsurr = -ΔHvap / T
where T is the temperature in Kelvin.
So, we need to convert the boiling point from Celsius to Kelvin by adding 273.15 to the value:
T = 83.4°C + 273.15 = 356.55 K
Next, we convert ΔHvap from kJ/mol to J/mol by multiplying it with 1000:
ΔHvap = 52.6 kJ/mol × 1000 J/kJ = 52600 J/mol
Now, we can substitute these values into the formula to find ΔSsurr:
ΔSsurr = -52600 J/mol / 356.55 K = -147.46 J/K*mol
Therefore, the change in entropy of the surroundings when one mole of the substance is vaporized at 1.00 atm is -147.46 J/K*mol.
To know more about "Entropy" refer here:
https://brainly.com/question/1859555#
#SPJ11
calculate the ph of a solution containing 200 ml of 0.1 m naoh and 80 ml of 2.5 m acetic acid. give the answer in two sig figs.
The pH of the solution containing 200 mL of 0.1 M NaOH and 80 mL of 2.5 M Acetic Acid is 2.47.
When we discuss a solution's pH, also known as its "potential of hydrogen" or "power of hydrogen," we are really talking about its hydrogen ion concentration. In other words, the pH scale is used to define whether an aqueous solution is basic or acidic. Acidic solutions with greater H+ ion concentrations often have pH values that are lower than basic or alkaline solutions.
When the solution's pH is less than 7 and the temperature is 25 °C, the solution is acidic. The same holds true for solutions that have a pH higher than 7. They are neutral ions if a solution has a pH of 7 at this temperature.
In pure water, there are 10-7 moles of dissociated hydrogen ions per litre. Based on the proportion of hydrogen ions (H+) relative to pure water, solutions are classified as acidic or basic.
We have acid base solution so net pH will be the amount of H+ left after neutralizing the acid acetic acid with base NaOH
so mole of H⁺ = volume x molarity
= 80mL x 2.5 M = 200 milli moles
similarly mole of base
= 200 mL x 0.1M
= 20 milli moles
so amount of H+ left = moles of acetic acid - moles of NaOH
= 200 millimoles - 20 millimoles
= 180 millimoles
The concentration of H⁺ = moles / volume of water
= 180 millimoles / 280 milliliter
= 0.64 M
pH = -log (H⁺) = -log(0.64 ) = 2.47
Learn more about pH of solution:
https://brainly.com/question/29323762
#SPJ4
The pH of the solution containing 200 mL of 0.1 M NaOH and 80 mL of 2.5 M Acetic Acid is 2.47.
When we discuss a solution's pH, also known as its "potential of hydrogen" or "power of hydrogen," we are really talking about its hydrogen ion concentration. In other words, the pH scale is used to define whether an aqueous solution is basic or acidic. Acidic solutions with greater H+ ion concentrations often have pH values that are lower than basic or alkaline solutions.
When the solution's pH is less than 7 and the temperature is 25 °C, the solution is acidic. The same holds true for solutions that have a pH higher than 7. They are neutral ions if a solution has a pH of 7 at this temperature.
In pure water, there are 10-7 moles of dissociated hydrogen ions per litre. Based on the proportion of hydrogen ions (H+) relative to pure water, solutions are classified as acidic or basic.
We have acid base solution so net pH will be the amount of H+ left after neutralizing the acid acetic acid with base NaOH
so mole of H⁺ = volume x molarity
= 80mL x 2.5 M = 200 milli moles
similarly mole of base
= 200 mL x 0.1M
= 20 milli moles
so amount of H+ left = moles of acetic acid - moles of NaOH
= 200 millimoles - 20 millimoles
= 180 millimoles
The concentration of H⁺ = moles / volume of water
= 180 millimoles / 280 milliliter
= 0.64 M
pH = -log (H⁺) = -log(0.64 ) = 2.47
Learn more about pH of solution:
https://brainly.com/question/29323762
#SPJ4
how many grams of copper(ii) nitrate are needed to produce 39.4 g copper(ii) phosphate in the presence of excess sodium phosphate?
The 26.6 grams of copper(II) nitrate are needed to produce 39.4 grams of copper(II) phosphate in the presence of excess sodium phosphate.
Why the 26.6 grams of copper(II) nitrate are needed to prodouce 39.4 grams?The balanced chemical equation for the reaction between copper(II) nitrate and sodium phosphate to form copper(II) phosphate is:
Cu(NO3)2 + Na3PO4 → Cu3(PO4)2 + 6NaNO3
From the equation, we can see that one mole of copper(II) nitrate reacts with one mole of sodium phosphate to produce one mole of copper(II) phosphate.
To determine the amount of copper(II) nitrate needed to produce 39.4 g of copper(II) phosphate, we need to use stoichiometry and the molar mass of copper(II) nitrate.
Calculate the molar mass of copper(II) nitrateCu(NO3)2 = 1 x Cu + 2 x N + 6 x OCu(NO3)2 = 1 x 63.55 g/mol + 2 x 14.01 g/mol + 6 x 16.00 g/molCu(NO3)2 = 187.55 g/molCalculate the moles of copper(II) phosphate producedm(Cu3(PO4)2) = 39.4 g ÷ (3 x 31.00 g/mol + 2 x 94.97 g/mol)m(Cu3(PO4)2) = 39.4 g ÷ 277.94 g/molm(Cu3(PO4)2) = 0.1418 molUse stoichiometry to determine the moles of copper(II) nitrate neededFrom the balanced chemical equation, we know that one mole of copper(II) nitrate reacts with one mole of copper(II) phosphate. Therefore, the moles of copper(II) nitrate needed is equal to the moles of copper(II) phosphate produced.n(Cu(NO3)2) = 0.1418 molCalculate the mass of copper(II) nitrate neededm(Cu(NO3)2) = n(Cu(NO3)2) x M(Cu(NO3)2)m(Cu(NO3)2) = 0.1418 mol x 187.55 g/molm(Cu(NO3)2) = 26.6 gLearn more about copper.
brainly.com/question/13677872
#SPJ11
Draw the lewis structure of NCO⁻ (with minimized formal charges) and then choose the appropriate formal charges for each of the atoms.
A) N = 0, C = 0, 0 = -1 B) N = -1, C = +1, O = -1 C) N = 0, C = 0, 0 = 0 D) N = +1, C = -1, 0 = -1 E) N=-1, C = 0, 0 = 0
The appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.
To draw the Lewis structure of NCO⁻, we first need to determine the total number of valence electrons in the molecule. N has 5 valence electrons, C has 4, and O has 6, giving a total of 15 electrons. We then place the atoms in a linear arrangement with the N in the center and the C and O on either side. We then place the remaining electrons around each atom to satisfy the octet rule.
N: 5 valence electrons + 2 electrons from a triple bond with C + 1 lone pair = 8 electrons
C: 4 valence electrons + 2 electrons from the triple bond with N = 6 electrons
O: 6 valence electrons + 1 lone pair = 8 electrons
The Lewis structure of NCO⁻ is therefore:
:N≡C:O:
We can then calculate the formal charges of each atom by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons for each atom.
Formal charge on N = 5 - 2 - 1 = +2
Formal charge on C = 4 - 2 - 0 = +2
Formal charge on O = 6 - 4 - 1 = +1
To minimize the formal charges, we can move one of the lone pairs from the O to the C, giving:
:N≡C=O:
Formal charge on N = 5 - 2 - 0 = +3
Formal charge on C = 4 - 2 - 1 = +1
Formal charge on O = 6 - 4 - 1 = +1
Therefore, the appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.
Learn more about Lewis structure :
https://brainly.com/question/20300458
#SPJ11
Draw a structural formula for the organic product of the following acid catalyzed reaction. acetophenone + 2,4-dinitrophenylhydrazine ----->
-You do not have to consider stereochemistry. -Apply formal charges to any nitro groups. - Do not draw organic or inorganic by-products.
O
|
C
|
-C
|
=C
O N -O
|
|
O N - O
| | |
-C -N-C
| |
C -C
Calculate the concentration of all species in a 0.210M C6H5NH3Cl solution.
Enter your answers numerically separated by commas. Express your answer using two significant figures.
[C6H5NH+3], [Cl?], [C6H5NH2],[H3O+], [OH?] = M?
[C6H5NH+3] = 0.210 M, [Cl-] = 0.210 M, [C6H5NH2] = 0 M, [H3O+] = 2.2 x 10^-11 M, [OH-] = 4.5 x 10^-4 M
How to find the dissociation equation of a reaction?The dissociation equation is as follows:
C6H5NH3Cl (solute) + H2O (solvent) → C6H5NH3+ (aq) + Cl- (aq)
From this equation, we can see that C6H5NH3Cl dissociates into C6H5NH3+ cations and Cl- anions in the solution. The concentration of C6H5NH3+ and Cl- will be equal to the initial concentration of C6H5NH3Cl, which is 0.210 M.
[C6H5NH3+] = 0.210 M, [Cl-] = 0.210 M
Since C6H5NH3+ is a weak acid, it will undergo partial ionization in water and produce H3O+ ions. The concentration of H3O+ ions can be calculated using the dissociation constant of C6H5NH3+ (Ka) and the concentration of C6H5NH3+:
Ka for C6H5NH3+ = Kw/Kb for C6H5NH2
Given that Kw (the ion product constant for water) is 1.0 x 10^-14 at 25°C, and assuming Kb for C6H5NH2 (the conjugate base of C6H5NH3+) is negligible, we can use Kw as an approximation for Ka of C6H5NH3+.
Ka = Kw/Kb = 1.0 x 10^-14
[H3O+] = [C6H5NH3+] = 0.210 M
Next, we can use the fact that Kw = [H3O+][OH-] to calculate the concentration of OH- ions:
Kw = [H3O+][OH-]
1.0 x 10^-14 = [0.210][OH-]
[OH-] = 4.76 x 10^-14 M
Finally, we can use the fact that the solution is neutral, meaning [H3O+] = [OH-], to calculate the concentration of H3O+ ions:
[H3O+] = [OH-] = 4.76 x 10^-14 M
In summary, the concentration of all species in the 0.210 M C6H5NH3Cl solution is:
[C6H5NH3+] = 0.210 M
[Cl-] = 0.210 M
[H3O+] = 4.76 x 10^-14 M
[OH-] = 4.76 x 10^-14 M
[C6H5NH2] = 0 M (assuming complete dissociation)
To know more about Dissociation Constant:
https://brainly.com/question/7283343
#SPJ11
Calculate the energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm.
The energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm are -13.6 eV, -3.4 eV, and -1.51 eV for the n values of 1, 2, and 3, respectively.
The energy levels of an electron constrained to move on a sphere of radius R are given by the equation:
E = -13.6 eV / n²
where n is the principal quantum number.
To calculate the energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm (0.05 nm), we plug in n values of 1, 2, and 3:
E₁ = -13.6 eV / 1² = -13.6 eV
E₂ = -13.6 eV / 2² = -3.4 eV
E₃ = -13.6 eV / 3² = -1.51 eV
This problem involves calculating the energies of the first three energy levels of an electron that is constrained to move on a sphere of radius 50 pm. The energy levels of a particle constrained to move on a sphere are given by the equation E = -13.6 eV / n², where n is the principal quantum number.
By plugging in n values of 1, 2, and 3, we can calculate the energies of the first three energy levels. It is important to note that the energy levels of a particle that is constrained to move on a sphere are quantized, meaning that the energies can only take on certain discrete values, which are determined by the quantum number n.
To know more about principal quantum number click on below link:
https://brainly.com/question/16725426#
#SPJ11
A disk of radioactively tagged benzoic acid 1 cm in diameter is spinning at 20 rpm in 94 cm? of initially pure water (1 mPa, 1 gm/cm²). We find that the solution contains benzoic acid at 7.3 x 10-4 g/cm3 after 10 hr 4 min and 3.43x 109 g/cm’after a long time (i.e., at saturation). What is the mass transfer coefficient? The diffusion coefficient of the acid is 1.8 x10 cm/sec.
The mass transfer coefficient (K) can be calculated using the following equation: the mass transfer coefficient is 0.005 cm/s and the heat transfer coefficient is 1.248 W/m2K.
K = [tex](C_s - C_i) / (t * A * (C_s - C_i) / C_s)[/tex]
where [tex]C_s[/tex] is the saturation concentration of benzoic acid (3.43x 10^9 g/cm3), [tex]C_i[/tex] is the initial concentration (assumed to be zero), t is the time elapsed (10 hr 4 min or 10.067 hours), A is the surface area of the disk [tex](πr^2 = π(0.5 cm)^2 = 0.785 cm2).[/tex]
Substituting the given values, we get:
K = (3.43x[tex]10^9[/tex] - 0) / (10.067 * 0.785 * (3.43x[tex]10^9[/tex] - 0) / 3.43x[tex]10^9[/tex])
K = 0.005 cm/s
The diffusion coefficient of benzoic acid (D) is given as 1.8 x [tex]10^-5[/tex] cm2/s.
The Sherwood number (Sh) can be calculated as:
Sh = K * D / δ
where δ is the thickness of the boundary layer around the disk, which can be assumed to be approximately equal to the radius of the disk (0.5 cm).
Substituting the values, we get:
Sh = 0.005 * 1.8x[tex]10^-5[/tex] / 0.5
Sh = 1.8x[tex]10^-8[/tex]
The Nusselt number (Nu) can be calculated using the Sherwood number:
[tex]Nu = Sh * Re * Sc^(1/3)[/tex]
where Re is the Reynolds number and Sc is the Schmidt number. Since the flow around the disk is laminar, the Reynolds number is very small (<<1) and can be neglected. The Schmidt number for benzoic acid in water at room temperature is approximately 600.
Substituting the values, we get:
[tex]Nu = 1.8x10^{-8} * 600^(1/3)[/tex]
Nu = 1.04x[tex]10^{-5}[/tex]
Finally, the heat transfer coefficient (h) can be calculated using the Nusselt number and the thermal conductivity of water:
h = Nu * k / δ
where k is the thermal conductivity of water (0.6 W/mK).
Converting the units to cm and substituting the values, we get:
h = 1.04x[tex]10^{-5}[/tex] * (0.6x[tex]10^{4}[/tex]) / 0.5
h = 1.248 W/m2K
Therefore, the mass transfer coefficient is 0.005 cm/s and the heat transfer coefficient is 1.248 W/m2K.
Learn more about benzoic acid
https://brainly.com/question/29010858
#SPJ4
List NACL, Ethyl Alcohol and Acetic Acid in order from strong electrolyte to weak
NACL is the strongest electrolyte, followed by Acetic Acid as a weak electrolyte, and Ethyl Alcohol as a non-electrolyte. Alcohol does not dissociate into ions in solution, so it is considered a non-electrolyte.
Based on the terms provided, the order of these substances from strong electrolyte to weak is as follows:
1. NaCl (Sodium Chloride) - Strong electrolyte
2. CH3COOH (Acetic Acid) - Weak electrolyte
3. C2H5OH (Ethyl Alcohol) - Non-electrolyte
Sodium chloride is a strong electrolyte because it dissociates completely into ions when dissolved in water. Acetic acid is a weak electrolyte as it partially dissociates in water. Ethyl alcohol is a non-electrolyte because it does not dissociate into ions in water.
Learn more about electrolyte here:
brainly.com/question/1557895
#SPJ11