calculate the h3o concentration at the halfway point when 38 ml of 0.16 m hbr is titrated with 0.1 m koh. assume additive volumes. answer in units of m

The balanced equation for the dissolution of silver chromate in water is: [tex]Ag2CrO4(s) ⇌ 2 Ag+(aq) + CrO42-(aq)[/tex] The solubility product expression is: [tex]Ksp = [Ag+]2[CrO42-][/tex]. Ksp js 1.5 x 10^-5 mol/L. The correct answer is option B

Let x be the molar solubility of [tex]Ag2CrO4[/tex] in the presence of [tex]K2CrO4.[/tex]Then, the equilibrium concentrations of Ag+ and [tex]CrO42-[/tex] are both equal to 2x (since the stoichiometric coefficients are 2 and 1, respectively).

The concentration of [tex]CrO42- from K2CrO4[/tex]  is 0.0050 M, which can be assumed to be constant as it is much larger than the molar solubility of [tex]Ag2CrO4.[/tex] Therefore, the equilibrium concentration can be expressed as:

[tex][CrO42-] = 1.9950 M[/tex]. Substituting into the Ksp expression and solving for x:[tex]Ksp = (2x)2(1.9950)1.1 x 10^-12 = 4x^2x = 1.5 x 10^-5 mol/L[/tex] .Therefore, the molar solubility of [tex]Ag2CrO4[/tex] in the presence of 0.0050 M [tex]K2CrO4[/tex] is [tex]1.5 x 10^-5 mol/L[/tex]  Correct Answer is (B).

Know more about molar solubility here:

https://brainly.com/question/28170449

#SPJ11

The value of the activation energy would likely be higher when the actual temperature of the solution was lower than that of the water bath.

When the actual temperature of the solution is lower than that of the water bath, the reaction rate will be slower because there is less thermal energy available to overcome the activation energy barrier. Consequently, it would require more energy to initiate the reaction, leading to a higher activation energy value.

1. The temperature of the solution is lower than that of the water bath.
2. As a result, there is less thermal energy in the solution.
3. The reaction rate is slower because there is less energy available to overcome the activation energy barrier.
4. Therefore, the activation energy value would be higher in this situation.

To know more about Temperature:

https://brainly.com/question/13134636

#SPJ11

Explanation:

2KClO3 → 2KCl + 3O2

2 mol KClO3 / 3 mol O2 = 4.2 mol KClO3 / x mol O2

x = (3 mol O2)(4.2 mol KClO3) / (2 mol KClO3) = 6.3 mol O2

6.3 moles of oxygen are produced by the decomposition of 4.2 moles of potassium chlorate.

To calculate the percent by mass of caffeine in Vivarin tablets, we can use the following equation. Percent by mass of caffeine is (w/w%) 83.7 %. Percent isolation of caffeine (%) = 88.5 %

Percent by mass of caffeine = (mass of caffeine / mass of Vivarin tablets) x 100% First, we need to calculate the mass of caffeine in the Vivarin tablets by subtracting the mass of the excipients from the total mass of the tablets.

Assuming that the excipients have negligible mass compared to the caffeine, we can assume that the total mass of the tablets is equal to the mass of caffeine plus the mass of the tablet excipients. Therefore:

Mass of caffeine in Vivarin tablets = Mass of Vivarin tablets - Mass of tablet excipients. Since we are not given the mass of the tablet excipients, we cannot calculate the exact mass of caffeine in the tablets.

However, we can assume that the mass of the excipients is small compared to the mass of the tablets and therefore, we can assume that the mass of caffeine in the tablets is equal to the mass of crude caffeine obtained from the tablets.

Therefore, the percent by mass of caffeine in Vivarin tablets is: Percent by mass of caffeine = (mass of crude caffeine / mass of Vivarin tablets) x 100% = (0.594 g / 0.709 g) x 100% = 83.7 %

To calculate the percent isolation of caffeine, we can use the following equation: Percent isolation of caffeine = (mass of recrystallized caffeine / mass of crude caffeine) x 100%. Therefore, the percent isolation of caffeine is: Percent isolation of caffeine = (0.526 g / 0.594 g) x 100% = 88.5 %

Know more about caffeine here:

https://brainly.com/question/9255669

#SPJ11

Answer:

Carbon material refers to any material that's composed primarily of carbon atoms. Carbon could be a flexible component that can exist in numerous diverse shapes, each with one of a kind physical and chemical properties.

Explanation:

Carbon materials have a wide extend of uses in our environment. Here are ten illustrations:

To learn more about carbon material,

https://brainly.com/question/17185984

https://brainly.com/question/30712449

The Kp for the reaction where ammonia decomposes to form an equilibrium between nitrogen and hydrogen gases is 0.0505 (Option C).

To determine the Kp for the reaction where ammonia decomposes to form an equilibrium between nitrogen and hydrogen gases, we first need to write the balanced chemical equation:

N₂ + 3H₂ <---> 2NH₃

Initially, we have 50 atm of ammonia (NH₃) and 0 atm of nitrogen (N₂) and hydrogen (H₂). At equilibrium, 20.0 atm of hydrogen gas is formed, which means that (20.0 atm) / 3 = 6.67 atm of nitrogen is formed and 2 × 6.67 = 13.34 atm of ammonia is consumed. Thus, the final equilibrium concentrations are:

[N₂] = 6.67 atm

[H₂] = 20.0 atm

[NH₃] = 50 - 13.34 = 36.66 atm

Now, we can calculate the Kp using the equilibrium expression:

Kp = ([N₂][H₂]³) / ([NH₃]²)

Kp = (6.67 * (20.0)³) / (36.66²)

≈ 0.0505

So, if 50 atm of ammonia were injected into a flask and 20.0 atm of hydrogen gas was formed once equilibrium has been reached, the Kp for the reaction is 0.0505.

Learn more about Kp: https://brainly.com/question/30550192

#SPJ11

The balanced half-reactions for the oxidation and reduction in the chemical reaction Cu + Cl₂ → CuCl₂:
Oxidation half-reaction: Cu → Cu²⁺ + 2e-
Reduction half-reaction: Cl₂ + 2e- → 2Cl⁻

An oxidation half-reaction is a chemical equation that describes the process of losing electrons (e-) or an increase in oxidation state of a reactant species in a redox reaction. In an oxidation half-reaction, the reactant species is oxidized, which means it loses electrons, and its oxidation state increases.

On the other hand, a reduction half-reaction is a chemical equation that describes the process of gaining electrons or a decrease in oxidation state of a reactant species in a redox reaction. In a reduction half-reaction, the reactant species is reduced, which means it gains electrons, and its oxidation state decreases.

In the oxidation half-reaction, copper (Cu) loses two electrons and is oxidized to form copper ions (Cu²⁺). In the reduction half-reaction, chlorine (Cl₂) gains two electrons and is reduced to form chloride ions (Cl⁻). When these two half-reactions are combined, they give the balanced overall equation for the reaction: Cu + Cl₂ → CuCl₂.

Learn more about half-reactions here: https://brainly.com/question/25920268

#SPJ11

The ∆S° for the reaction 2 O₃(g) → 3 O₂(g) is 137 J/mol*K.

To determine ∆S° for 2 O₃(g) → 3 O₂(g), use the formula ∆S° = Σ S°(products) - Σ S°(reactants). O₃ has a standard molar entropy (S°) of 239 J/mol*K, and O₂ has a standard molar entropy of 205 J/mol*K.

Step 1: Calculate the total entropy of the products:
3 moles of O₂: 3 * 205 J/mol*K = 615 J/mol*K

Step 2: Calculate the total entropy of the reactants:
2 moles of O₃: 2 * 239 J/mol*K = 478 J/mol*K

Step 3: Calculate the entropy change (∆S°):
∆S° = 615 J/mol*K (products) - 478 J/mol*K (reactants) = 137 J/mol*K

To know more about standard molar entropy click on below link:

https://brainly.com/question/15908262#

#SPJ11

it is important to analyze the NMR spectrum of β-caryophyllene in the appropriate NMR experiment, typically proton NMR (1H NMR), to identify the characteristic peaks corresponding to this natural terpene compound.

What is β-caryophyllene?

β-caryophyllene is a natural terpene compound found in many essential oils, particularly in spices such as black pepper, cloves, and cinnamon. It is a sesquiterpene, which means it is composed of three isoprene units, and has the molecular formula C15H24.

The proton (1H) NMR spectrum of β-caryophyllene would likely show peaks corresponding to the various types of hydrogen atoms in the molecule. For example:

Protons on the alkene (C=C) double bonds: β-caryophyllene has three alkene double bonds, which would typically appear as multiple peaks in the region of 5-7 ppm in the proton NMR spectrum.

Protons on the cyclohexene ring: β-caryophyllene has a cyclohexene ring, which would typically show peaks in the region of 1-3 ppm in the proton NMR spectrum.

Learn more about β-caryophyllene from the given link

https://brainly.in/question/6103759

#SPJ1

Mixing equal volumes of 0.1 M Ca(NO₃)₂ and AgF solutions results in no precipitate and a colorless solution. This is because Ca(NO₃)₂ and AgF do not react with each other.

When two solutions are mixed, a reaction may occur that forms a solid called a precipitate. However, in this case, Ca(NO₃)₂ and AgF do not react with each other, so no solid is formed. The resulting solution is colorless because none of the ions present in the solutions produce a color.

It is important to note that the absence of a visible reaction does not necessarily mean that no reaction occurred. In this case, a chemical reaction did not occur, but the solutions may have undergone a physical change, such as mixing.

To know more about physical change click on below link:

https://brainly.com/question/17931044#

#SPJ11

The equilibrium constant for the given reaction is 4.0 × 10⁹.

The equilibrium constant (K_eq) of a reaction is a measure of the position of the chemical equilibrium between the reactants and products of a reaction.

The value of K_eq is a ratio of the concentrations of the products to the concentrations of the reactants, with each concentration raised to the power of its stoichiometric coefficient in the balanced chemical equation.

Combine these two reactions:
PbBr₂(s) + 3OH⁻(aq) ⇌ Pb(OH)₃⁻(aq) + 2Br⁻(aq)

The overall reaction is the combination of dissolution and complex formation reactions, so we can find the equilibrium constant (Keq) by multiplying Ksp and Kf:
Keq = Ksp × Kf
Keq = (5.00 × 10⁻⁵) × (8 × 10¹³)
Keq = 4.0 × 10⁹

Learn more about equilibrium constants here:

https://brainly.com/question/13155499

#SPJ11

The correct statement regarding the migration of bio molecules is that the rate of migration is inversely proportional to the current. The correct option is the rate of migration is inversely proportional to the current.

This means that as the current increases, the rate of migration decreases. The reason for this is that when an electric field is applied to a solution, charged particles will move towards the electrode of the opposite charge. In the case of bio molecules, they will move towards the electrode that has the opposite charge to their own.

However, as the current increases, the number of charged particles in the solution also increases, leading to greater competition for space and slower migration rates. Additionally, the rate of migration is also affected by the resistance of the medium, with higher resistance leading to slower migration rates, and by the molecular weight of the bio molecules, with larger molecules migrating more slowly than smaller ones.

Therefore, it is important to consider all these factors when studying the migration of bio molecules in electric fields. The correct option is the rate of migration is inversely proportional to the current.

For more about migration:

https://brainly.com/question/17991559

#SPJ11

The ranking is as shown below:  

                                                                                                                                                                                                1 = D hydrocyanic acid

2 = C formic acid

3 = E propanoic acid

4 = A acetic acid

5 = B chlorous acid

1 = D hydrocyanic acid

2 = C formic acid

3 = E propanoic acid

4 = A acetic acid

5 = B chlorous acid

Here's the explanation behind the ranking:

Hydrocyanic acid (HCN) is the strongest weak acid on the list due to the high electronegativity of nitrogen, which draws electron density away from the hydrogen atom and makes it more acidic.

Formic acid (HCOOH) is the second strongest weak acid due to the presence of the carboxylic acid functional group (-COOH), which is more acidic than a single -OH group found in alcohols and phenols.

Propanoic acid (CH3CH2COOH) is weaker than formic acid due to the longer carbon chain, which stabilizes the negative charge on the conjugate base.

Acetic acid (CH3COOH) is weaker than propanoic acid due to the electron-withdrawing effect of the carbonyl group (C=O), which decreases the electron density on the carboxylic acid functional group and makes it less acidic.

Chlorous acid (HClO2) is the weakest weak acid on the list, as it is a very weak acid that barely ionizes in water.

Click the below link, to learn more about Strong and Weak Acids:

https://brainly.com/question/29375659

#SPJ11

That a halogen Y would be the better oxidizing agent as it has a higher tendency to gain electrons compared to X. However, if no reaction occurred, then it is not possible to determine which halogen is the better oxidizing agent based on this experiment alone.

(a) The formation of a blue color in the hexane layer does not necessarily indicate a reaction occurred. It could simply be due to the transfer of some of the blue-colored Y from the aqueous phase to the hexane phase. Therefore, the observation of a blue hexane layer alone is not sufficient to conclude that a reaction occurred.

(b) The ability of a halogen to act as an oxidizing agent depends on its tendency to gain electrons and form halide ions. The higher the tendency, the better the oxidizing agent it is. In this case, if the blue color in the hexane layer indicates the formation of a new compound, then it could be due to the oxidation of X by Y, where Y acts as the oxidizing agent. Therefore, Y would be the better oxidizing agent as it has a higher tendency to gain electrons compared to X. However, if no reaction occurred, then it is not possible to determine which halogen is the better oxidizing agent based on this experiment alone.

Click the below link, to learn more about Oxidization of halogens:

https://brainly.com/question/29220016

#SPJ11

A. The amount of heat transferred when 29.0 g of CH3OH(g) is decomposed by this reaction at constant pressure is 114 kJ.

B. The mass of methane gas produced is 8.67 g.

C. The amount of heat released when 38.5 g of CH4(g) reacts completely with O2(g) to form CH3OH(g) at constant pressure is 238 kJ.

The molar mass of CH3OH is 32.04 g/mol. Therefore, 29.0 g of CH3OH is equal to 29.0 g / 32.04 g/mol = 0.904 mol of CH3OH.

From the balanced equation, the reaction produces 2 moles of CH4 and 1 mole of O2 for every 2 moles of CH3OH decomposed.

Therefore, the amount of heat transferred when 0.904 mol of CH3OH is decomposed is:

0.904 mol CH3OH × (252.8 kJ / 2 mol CH3OH) = 114 kJ

So, the amount of heat transferred when 29.0 g of CH3OH(g) is decomposed by this reaction at constant pressure is 114 kJ.

The enthalpy change during the reaction is 82.3 kJ for a given sample of CH3OH. We need to find the mass of methane gas produced.

From the balanced equation, 2 moles of CH3OH produces 2 moles of CH4.

Therefore, the amount of CH4 produced when 82.3 kJ of heat is transferred is:

2 mol CH4 × (82.3 kJ / (252.8 kJ / 2 mol CH3OH)) = 0.540 mol CH4

The molar mass of CH4 is 16.04 g/mol. Therefore, the mass of CH4 produced is:

0.540 mol CH4 × 16.04 g/mol = 8.67 g

So, the mass of methane gas produced is 8.67 g.

From the balanced equation, 1 mole of CH4 produces 1 mole of CH3OH when reacted with O2.

Therefore, the amount of heat released when 38.5 g of CH4 reacts completely with O2 to form CH3OH is:

38.5 g CH4 / 16.04 g/mol CH4 × (252.8 kJ / 2 mol CH3OH) = 238 kJ

So, the amount of heat released when 38.5 g of CH4(g) reacts completely with O2(g) to form CH3OH(g) at constant pressure is 238 kJ.

Learn more about  heat transferred

brainly.com/question/13433948

#SPJ11

The Lewis dot structure for methane, CH4, shows a total of 8 valence electrons.

Methane (CH4) is a covalent compound consisting of one carbon atom and four hydrogen atoms. The Lewis dot structure is a diagram that shows the bonding between atoms in a molecule, as well as any lone pairs of electrons that may be present.

To draw the Lewis dot structure for methane, we first need to determine the total number of valence electrons in the molecule. Carbon has four valence electrons, and each hydrogen atom has one valence electron. Therefore, the total number of valence electrons in methane is:

4 (carbon) + 4 (hydrogen) = 8  After adding the electrons, the Lewis dot structure for methane looks like this:

H   H

|   |

H--C---H

| |

H H

Each of the four hydrogen atoms has one dot, representing its single valence electron. Carbon has four dots, representing its four valence electrons. The total number of electrons shown in the Lewis dot structure is 8, which matches the total number of valence electrons in the molecule.

Click the below link, to learn more about Lewis Dot Structure:

https://brainly.com/question/20300458

#SPJ11

The electrophilic addition of water to 1-methyl cyclohexene proceeds via the Markovnikov's rule, where the hydrogen of the water molecule is added to the carbon atom that is already bonded to more hydrogen atoms.

The development of an intermediate carbocation is a component of the reaction mechanism. The water molecule's proton is attacked by the alkene's pi bond in the first step, creating a carbocation intermediate. The second stage involves the attack of the carbocation by the lone pair of electrons on the water molecule, which results in the creation of the end product, a tert-butyl alcohol.

The mechanism can be illustrated by the use of curved arrows to represent the movement of electrons during each step of the reaction.

Learn more about methyl cyclohexene

https://brainly.com/question/28204426

#SPJ4

The pH of a 0.620 M solution of [tex]CH_3NH_3^+Br^-[/tex] is 10.60.

The pH of a solution is a measure of its acidity or basicity, with a pH below 7 indicating acidity and a pH above 7 indicating basicity. To determine the pH of a 0.620 M solution of [tex]CH_3NH_3^+Br^-[/tex], we need to first consider the acid-base equilibrium of CH3NH2, which is

[tex]CH_3NH_2 + H_2O[/tex] ⇌ [tex]CH_3NH_3^+ + OH^-[/tex].

The pKb of [tex]CH_3NH_2[/tex] is 10.62, which is the negative logarithm of the base dissociation constant. We can use this value to calculate the Kb of [tex]CH_3NH_2[/tex], which is

[tex]Kb = 10^{(-pKb)} = 10^{(-10.62)} = 2.51 * 10^{(-11)}.[/tex]

Since [tex]CH_3NH_2[/tex] is a weak base, we can assume that the concentration of [tex]OH^-[/tex] produced from the dissociation of [tex]CH_3NH_2[/tex] is negligible compared to the concentration of [tex]CH_3NH_3^+[/tex]. Therefore, we can simplify the equation to

[tex]CH_3NH_2 + H_2O[/tex] ⇌ [tex]CH_3NH_3^+[/tex].

Next, we need to calculate the concentration of [tex]CH_3NH_2[/tex] in the solution. Since the solution is 0.620 M and [tex]CH_3NH_3^+[/tex] is a salt, we can assume that the concentration of [tex]CH_3NH_2[/tex] is also 0.620 M.

Using the expression for the base dissociation constant,

[tex]Kb = [CH_3NH_3^+][OH^-]/[CH_3NH_2][/tex],

we can solve for the concentration of [tex]OH^-[/tex],

which is equal to

[tex]Kb*[CH_3NH_2]/[CH_3NH_3^+][/tex].

Substituting the values we have calculated, we get [tex]OH^-[/tex] concentration

= [tex]2.51 * 10^{(-11)}*0.620/0.620 = 2.51 * 10^{(-11)} M.[/tex]

To calculate the pH of the solution, we need to find the concentration of [tex]H^+[/tex] ions. Since water autoionizes to produce equal concentrations of [tex]H^+[/tex] and [tex]OH^-[/tex] ions, we can assume that the concentration of [tex]H^+[/tex] ions is also [tex]2.51 * 10^{(-11)} M.[/tex]

Taking the negative logarithm of the [tex]H^+[/tex] ion concentration, we get the pH of the solution:

[tex]pH = -log[H^+] = -log(2.51 * 10^{(-11)}) = 10.60.[/tex]

To know more about pH, refer to the link below:

https://brainly.com/question/15562899#

#SPJ11

For the given reaction, 6.6 L is the volume of NO₂Cl that can be produced from 0.70 L of Cl₂, assuming an excess of NO₂.

A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.

The total volume of an item is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold.

2NO[tex]_2[/tex](g) + Cl[tex]_2[/tex](g) →2NO[tex]_2[/tex]Cl(g)

every 1 mole of Cl[tex]_2[/tex], you can produce 2 mols of NO[tex]_2[/tex]Cl

0.70  Cl[tex]_2[/tex] x 2 L NO[tex]_2[/tex]Cl/ 1 LCl[tex]_2[/tex] = 6.6 L NO[tex]_2[/tex]Cl

To know more about volume, here:

https://brainly.com/question/1578538

#SPJ1

If a low molecular weight carboxylic acid, such as acetic acid, is exposed to a slightly acidic aqueous environment such as skin, it may undergo protonation and form its corresponding conjugate acid. This can lead to irritation or a burning sensation on the skin.


When a low molecular weight carboxylic acid is exposed to a slightly acidic aqueous environment like skin, the carboxylic acid may undergo the following processes:

1. Ionization: In the presence of water, carboxylic acid can ionize to form a carboxylate anion and a hydronium ion. This process is reversible, and the extent of ionization depends on the pKa of the carboxylic acid and the pH of the environment.

2. Partitioning: Due to its low molecular weight, carboxylic acid may be able to readily diffuse through the skin's aqueous layers. The partitioning of the carboxylic acid between the aqueous environment and the skin layers will depend on the compound's hydrophilicity or lipophilicity.

3. Interaction with skin proteins: Carboxylic acid may also interact with proteins in the skin, forming hydrogen bonds or other non-covalent interactions. These interactions can affect the overall skin properties, such as hydration, pH, and barrier function.

4. Possible irritation or sensitization: Depending on the specific carboxylic acid and its concentration, exposure to the skin may cause irritation or sensitization. This can result in redness, itching, or other signs of skin discomfort.

In summary, when a low molecular weight carboxylic acid is exposed to a slightly acidic aqueous environment such as skin, it may ionize, the partition between the aqueous environment and skin layers, interact with skin proteins and potentially cause irritation or sensitization.

Learn more about acids here: https://brainly.com/question/31050542

#SPJ11

The reaction will not proceed spontaneously when a piece of silver is placed in a solution in which [silver ion] = [copper2 ion] = 1.00 M.

Both the spoon and the solution will remain unchanged. Due to its position after copper in the metal activity sequence, silver is less reactive than copper. Hence, copper cannot be replaced by silver in its salt solution. As a result, no changes are noticed.

The spontaneity of a reaction can be determined by calculating the cell potential (Ecell) using the Nernst equation:

Ecell = E°cell - (RT/nF)lnQ

where E°cell is the standard cell potential, R is the gas constant, T is the temperature in kelvins, n is the number of electrons transferred in the reaction, F is the reaction quotient, and Q is the Faraday constant.

For the given reaction, the half-reactions and their standard reduction potentials (E°) are:

silver ion + electron → silver(s) E° = 0.80 V

copper2+ + 2electron → copper(s) E° = 0.34 V

The formula for calculating the overall standard cell potential is:

E°cell = E°reduction (reduced species) - E°reduction (oxidized species)

E°cell = E°(copper2+ + 2e- → copper(s)) - E°(silver ion + electron → silver(s))

E°cell = 0.34 - 0.80

E°cell = -0.46 V

Since the reaction involves the transfer of two electrons, n = 2.

At equilibrium, Q = [silver+]²/[copper2+], and the Nernst equation becomes:

Ecell = E°cell - (RT/nF)ln([Ag+]^2/[Cu2+])

Substituting the given concentrations and constants, the cell potential at equilibrium can be calculated as:

Ecell = -0.46 V - (0.0257 V/K)(273 K/2)(ln 1)

Ecell = -0.46 V

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

The mass of KClO3 needed in an oxygen candle to provide a one-day supply of oxygen for an adult consuming 909g of O2 per day is 1520g.

To calculate this, we use the balanced equation from question 1, which is 2KClO3 → 2KCl + 3O2. From this equation, we can determine the mole ratio between KClO3 and O2. For every 2 moles of KClO3, 3 moles of O2 are produced.

Step 1: Convert the given mass of O2 to moles using its molar mass (32g/mol).
909g O2 * (1 mol O2 / 32g O2) = 28.41 mol O2

Step 2: Use the mole ratio to find the moles of KClO3 required.
(28.41 mol O2) * (2 mol KClO3 / 3 mol O2) = 18.94 mol KClO3

Step 3: Convert moles of KClO3 to grams using its molar mass (122.55g/mol).
(18.94 mol KClO3) * (122.55g KClO3 / 1 mol KClO3) = 1520g KClO3

So, 1520g of KClO3 is needed in the oxygen candle for a one-day supply of oxygen.

To know more about balanced equation click on below link:

https://brainly.com/question/7181548#

#SPJ11

K value for PbCl2 (5) + 3 OH (aq) + Pb(OH)3 + 2 C1- (aq) is  3.27 x 10 M (rounded to two significant figures)

To solve for the [OH-], we need to first write out the balanced chemical equation and the expression for the solubility product constant (Ksp) of PbCl2:

PbCl2 (s) ↔ Pb2+ (aq) + 2 Cl- (aq)
Ksp = [Pb2+][Cl-]^2 = 1.17 x 10^-5

Next, we can use the Ksp of PbCl2 to determine the concentration of Pb2+ ions in the saturated solution:

1.17 x 10^-5 = [Pb2+][Cl-]^2
1.17 x 10^-5 = [Pb2+](2x)^2  (where 2x is the molar concentration of Cl- ions)
[Pb2+] = x = 2.42 x 10^-3 M

Now, we can use the K value given for Pb(OH)3 to determine the concentration of hydroxide ions produced when Pb2+ ions react with OH- ions:

K = [Pb2+][OH-]^3 / [Pb(OH)3]
8.00 x 10^13 = (2.42 x 10^-3)[OH-]^3 / (1.0 x 10^-18)
[OH-]^3 = (8.00 x 10^13)(1.0 x 10^-18) / (2.42 x 10^-3)
[OH-]^3 = 3.32 x 10^10
[OH-] = 3.27 x 10^-4 M

Since we added 0.30 moles of NaOH to the solution, we need to adjust the concentration of [OH-] accordingly:

[OH-] = (0.30 moles / 1.0 L) / 2 = 0.15 M
[OH-] = 3.27 x 10^-4 M + 0.15 M = 3.27 x 10^-1 M or 3.27 x 10 M (rounded to two significant figures)

To learn more about hydroxide ions click here

brainly.com/question/14576028

#SPJ11

0.117 grams of cobalt-60 are left from a 30 gram sample after 42 days.

The half-life of a radioactive isotope is the amount of time it takes for one-half of the radioactive isotope to decay. The half-life of a specific radioactive isotope is constant; it is unaffected by conditions and is independent of the initial amount of that isotope.

The four common radioactive elements are Uranium, Radium, Polonium, and Thorium. Radioactive material is a class of chemicals where the nucleus of the atom is unstable. Radioactive isotopes are used as tracers in medicine, industry, and agriculture.

The expression for radioactive decay is N = N0e-ln(2)t/th  where N is the mass, at time t, N0 is the mass at the start (30grams) and th is the half-life (5.25days), so here:

N = 30 × e- [{㏑(2) ×42}/5.2] = N = 0.1171 grams

To the nearest thousandth of a gram this is 0.117grams.

To know about cobalt

https://brainly.com/question/30518617

#SPJ4

The complete question is

The half life of colbalt-60 is approximately 5.2 days. find the amount of cobalt-60 left from a 30 gram sample after 42 days. round to the nearest thousandth of a gram.

It is 3.46 in terms of Ph. Nitrous acid (HNO₂) (H N O 2) partially ionises in aqueous solution to yield an equimolar concentration of NO₂ N O 2 ion and H₃O+ H 3 O + ion.

The concentration of the hydronium ion is equal to 0.20 M (the same as the concentration of nitric acid), as complete dissociation happens for a strong acid like nitric acid. Now that we have this, we can determine the solution's pH level. The solution has an equal pH of 0.70.At 25.0 degrees Celsius, the hydrofluoric acid (HF) 0.25 M aqueous solution has a pH of 2.03.

To know more about Nitrous acid, click here:

https://brainly.com/question/17055219

#SPJ4

The equation of the reaction is [tex]CH_{3}COOH[/tex] + NaOH -> [tex]CH_{3}COOHNa[/tex] + [tex]H_{2}O[/tex]. We need 0.0125 moles of acetic acid to completely neutralize 25ml of NaOH 0.5M.

1. The equation for the reaction between acetic acid and sodium hydroxide is: [tex]CH_{3}COOH[/tex] + NaOH -> [tex]CH_{3}COOHNa[/tex] + [tex]H_{2}O[/tex]

2. To calculate how many moles of acetic acid are required to completely neutralize 25ml of NaOH 0.5M, we need to use the following equation: Moles = concentration x volume

First, we need to convert the volume of NaOH from milliliters to liters: 25ml = 0.025L, Then, we can use the concentration of NaOH (0.5M) and the volume in liters to calculate the number of moles of NaOH: Moles of NaOH = 0.5M x 0.025L = 0.0125 moles

Since the reaction is a 1:1 ratio, we know that we need the same number of moles of acetic acid as moles of NaOH. Therefore, we need 0.0125 moles of acetic acid to completely neutralize 25ml of NaOH 0.5M.

To know more about acetic acid, refer here:

https://brainly.com/question/12924347#

#SPJ11

To predict the regions where you can expect IR absorption for each bond, we need to consider the functional groups present and their respective vibrational frequencies.

Here are some common functional groups and their approximate IR absorption ranges:

These ranges will help you predict the regions where IR absorption is expected for various types of bonds. Make sure to analyze the molecule's structure and identify the functional groups present to determine the expected IR absorptions.

Learn more about IR absorption at https://brainly.com/question/29746356

#SPJ11

At the activation threshold, stronger pressure on Na+ opens voltage-gated channels, allowing rapid Na+ influx, causing a depolarization phase.

At the threshold of activation (critical firing level), the ion with the stronger net pressure (combined effects of the forces of electrostatic pressure (EP) and diffusion) acting upon it is Na+ (sodium ion). This is because, at this point, the voltage-gated sodium channels open, allowing Na+ ions to rapidly flow into the cell, driven by both their concentration gradient and the electrostatic pressure. This influx of Na+ ions causes the depolarization phase of the action potential.

learn more about concentration here:

https://brainly.com/question/10725862

#SPJ11

The equilibrium constant (Kc) for the given reaction at the temperature of the mixture is 134.4.

What is Equilibrium Constant?

The equilibrium constant (Kc) is a numerical value that describes the position of a chemical reaction at equilibrium. It relates the concentrations of the reactants and products at equilibrium and provides information about the extent of the reaction, as well as the direction in which the reaction proceeds.

The equilibrium constant, denoted as Kc, is a measure of the extent of a chemical reaction at equilibrium. It is calculated using the concentrations of the reactants and products at equilibrium.

Given the following equilibrium:

[tex]2NO_{2}[/tex](g) ⇌[tex]N_{2} O_{4}[/tex](g)

And the concentrations of the species at equilibrium:

[[tex]NO_{2}[/tex](g)] = 0.0048 M

[[tex]NO_{2}[/tex]g)] = 0.0031 M

The equilibrium constant expression, Kc, for this reaction is:

Kc = [[tex]N_{2} O_{4}[/tex](g)] / [tex][NO2(g)]^{2}[/tex]

Substituting the given concentrations into the expression:

Kc = (0.0031 M) /[tex](0.0048 M)^{2}[/tex]

Kc = 0.0031 M / (0.0048 M * 0.0048 M)

Kc = 0.0031 M / 0.00002304 [tex]M^{2}[/tex]

Kc = 134.4

Learn more about Equilibrium Constant from the given link

https://brainly.com/question/3159758

#SPJ1

Methylamine is a weak base, and hydrochloric acid (HCl) is a strong acid. The reaction between the two is:

CH3NH2 + HCl → CH3NH3+Cl-

At the equivalence point of the titration, the moles of HCl added will equal the moles of methylamine present in the solution. This means that all the methylamine will have been converted to its conjugate acid, CH3NH3+, and the solution will contain only CH3NH3+ and Cl- ions.

To calculate the pH at the equivalence point, we need to find the concentration of CH3NH3+ in the solution. This can be done by using the dissociation constant of the weak base, methylamine:

Kb = [CH3NH3+][OH-]/[CH3NH2]

At the equivalence point, [CH3NH2] = [CH3NH3+], so we can simplify the equation to:

Kb = [CH3NH3+]^2/[CH3NH2]

[CH3NH3+]^2 = Kb[CH3NH2]

[CH3NH3+] = sqrt(Kb[CH3NH2])

[CH3NH3+] = sqrt(5.0 x 10^-4 x 0.050)

[CH3NH3+] = 0.0224 M

Now we can use the equation for the ionization constant of a weak acid to find the pH:

Ka = [H+][A-]/[HA]

For the conjugate acid of methylamine, CH3NH3+, the Ka is:

Ka = Kw/Kb = 1.0 x 10^-14/5.0 x 10^-4 = 2.0 x 10^-11

At the equivalence point, [H+] = [CH3NH3+], so we can simplify the equation to:

Ka = [H+]^2/[CH3NH2+]

[H+]^2 = Ka[CH3NH2+]

[H+] = sqrt(Ka[CH3NH2+])

[H+] = sqrt(2.0 x 10^-11 x 0.0224)

[H+] = 4.2 x 10^-7 M

pH = -log[H+]

pH = -log(4.2 x 10^-7)

pH = 6.38

Therefore, the pH at the equivalence point of the titration of 0.100 M methylamine with 0.100 M HCl is 6.38.

*IG:whis.sama_ent*