The molar solubility of Ca(OH)₂ at pH values of 5, 7, and 8 at 25°C is 6.46 x 10⁻⁶ M, 3.21 x 10⁻⁶ M, and 2.28 x 10⁻⁶ M, respectively.
The solubility of Ca(OH)₂ is affected by the pH of the solution because it is a basic salt. When Ca(OH)₂ dissolves in water, it dissociates into Ca²⁺ and OH⁻ ions. The OH⁻ ion concentration in the solution determines the pH of the solution, which, in turn, affects the solubility of Ca(OH)₂.
The solubility product constant (Ksp) of Ca(OH)₂ is 5.02 x 10⁻⁶ at 25°C. The equation for the dissociation of Ca(OH)₂ is as follows:
Ca(OH)₂(s) ⇌ Ca²⁺(aq) + 2OH⁻(aq)
Using the Ksp expression, the concentration of Ca²⁺ and OH⁻ ions can be calculated, which can be used to determine the molar solubility of Ca(OH)₂ at different pH values.
At pH 5, the concentration of OH⁻ ions is 10⁻⁹. The molar solubility of Ca(OH)₂ at pH 5 can be calculated as 6.46 x 10⁻⁶ M.
At pH 7, the concentration of OH⁻ ions is 10⁻⁷. The molar solubility of Ca(OH)₂ at pH 7 can be calculated as 3.21 x 10⁻⁶ M.
At pH 8, the concentration of OH⁻ ions is 10⁻⁸. The molar solubility of Ca(OH)₂ at pH 8 can be calculated as 2.28 x 10⁻⁶ M.
Therefore, the molar solubility of Ca(OH)₂ decreases as the pH of the solution increases due to the decrease in OH⁻ ion concentration.
learn more about solubility here:
https://brainly.com/question/28170449
#SPJ11
50cm3 of hydrogen is collected over water at 17∘C and 750 mm Hg pressure. Calculate the volume of dry gas at S.T.P. The water vapour pressure at 17∘C is 14 mm Hg.
The volume of the dry gas at STP is equal to the number of moles of hydrogen collected at 17°C and 750 mmHg multiplied by 0.0821 L atm/K mol divided by 760 mmHg/101.3 kPa.
Assuming that the hydrogen collected is a dry gas, the volume of the gas at STP can be calculated using the Ideal Gas Law. The Ideal Gas Law states that pressure multiplied by volume is equal to the number of moles of a gas multiplied by the universal gas constant and the temperature.
In this case, the given pressure is 750 mmHg and the temperature is 17°C. The water vapour pressure at 17°C is 14 mmHg, so the total pressure of the system is 750 mmHg - 14 mmHg = 736 mmHg. The universal gas constant is 0.0821 L atm/K mol.
To calculate the volume of the dry gas at STP, the Ideal Gas Law can be rearranged to make volume the subject.
Volume (at STP) = Number of moles (at 17°C and 750 mmHg) x 0.0821 L atm/K mol / (101.3 kPa x 760 mmHg/101.3 kPa).
Know more about dry gas here
https://brainly.com/question/20494871#
#SPJ11
how does chain length affect the properties of crude oil fractions?
Explanation:
As the hydrocarbon chain length increases, viscosity increases. As the hydrocarbon chain length increases, flammability decreases. hydrogen in the fuels are oxidised, releasing carbon dioxide, water and energy. The boiling point of the chain depends on its length.
Hopefully this helps! :)
Explanation:
As the hydrocarbon chain length increases, viscosity increases. As the hydrocarbon chain length increases, flammability decreases. hydrogen in the fuels are oxidised, releasing carbon dioxide, water and energy. The boiling point of the chain depends on its length.
Write the complete electron configuration for the chromium atom.
Using NOBLE GAS notation write the electron configuration for the nickel atom.
The complete electron configuration for the chromium atom is: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵ 4s¹.
What is electronic configuration?This configuration represents the arrangement of all the electrons in the chromium atom, with the first two electrons occupying the 1s orbital, followed by two electrons in the 2s orbital, six electrons in the 2p orbital, two electrons in the 3s orbital, six electrons in the 3p orbital, five electrons in the 3d orbital, and one electron in the 4s orbital.
The noble gas notation for the electron configuration of the nickel atom is: [Ar] 3d⁸ 4s². This notation represents the configuration of electrons in the nickel atom by using the symbol for the noble gas argon (Ar) to represent the electron configuration up to the preceding noble gas configuration. In this case, the electron configuration of argon is 1s² 2s² 2p⁶ 3s² 3p⁶, so we use the symbol [Ar] to represent this configuration. The remaining electrons in the nickel atom are eight electrons in the 3d orbital and two electrons in the 4s orbital.
Learn more about electron configuration here:
brainly.com/question/29757010
#SPJ1
What is the ph of a weak base with a concentration of 0.66m? kb=8.6*10^-10
The pH of the weak base with a concentration of 0.66 M and Kb value of 8.6 x 10⁻¹⁰ is 9.28.
To find the pH of a weak base, we first need to use the equilibrium constant expression for its reaction with water to calculate the hydroxide ion concentration.
The equilibrium constant expression for the reaction of a weak base, B, with water is:
Kb = [BH⁺][OH⁻] / [B]
Assuming that the initial concentration of the weak base is the same as its equilibrium concentration, we can write:
Kb = x² / (0.66 - x)
where x is the concentration of OH⁻ ions formed when the weak base dissociates.
Since the weak base is weak, we can assume that x is much smaller than 0.66, so we can simplify the equation:
Kb = x² / 0.66
Solving for x, we get:
x = √(Kb x 0.66) = √(8.6 x 10⁻¹⁰ x 0.66) = 1.9 x 10⁻⁵ M
Now, we can use the fact that pH + pOH = 14 to calculate the pH:
pOH = -log[OH⁻] = -log(1.9 x 10⁻⁵) = 4.72
pH = 14 - pOH = 9.28
To know more about equilibrium constant click on below link:
https://brainly.com/question/31321186#
#SPJ11
Arrange the elements in each set in order of increasing electronegativity: enter with no spaces e.g.
a. Sb
b. Sn
c. As
The increasing order of electronegativity is Sn < Sb < As.
Electronegativity is the ability of an atom to attract electrons towards itself in a chemical bond. The electronegativity values generally increase from left to right across a period and decrease down a group in the periodic table. To arrange the given elements, we need to consider their positions:
a. Sb (Antimony) - Group 15, Period 5
b. Sn (Tin) - Group 14, Period 5
c. As (Arsenic) - Group 15, Period 4
Since both Sb and As are in Group 15, As is higher in the periodic table, making it more electronegative. Sn is in Group 14, making it the least electronegative element in the set. So, the correct order is: Sn < Sb < As.
To know more about Electronegativity click on below link:
https://brainly.com/question/17762711#
#SPJ11
a solution contains 0.253 m potassium fluoride and 5.35×10-2 m hydrofluoric acid. The pH of this solution is A
A solution contains 0.273 M potassium fluoride and 0.236 M hydrofluoric acid. The solution is acidic with a pH less than 7.
The pH of the solution containing 0.273 M potassium fluoride and 0.236 M hydrofluoric acid can be calculated by considering the equilibrium between the acid and its conjugate base. Hydrofluoric acid is a weak acid and when it dissolves in water, it dissociates partially to give H+ ions and F- ions. Potassium fluoride, on the other hand, is a salt that completely dissociates into K+ and F- ions in water.
The F- ions from both the acid and the salt will react to form the weak acid HF. The amount of HF formed will depend on the relative concentrations of F- ions from the acid and the salt. The pH of the solution will also depend on the dissociation constant of the weak acid, which is approximately [tex]3.5 * 10^{-4}[/tex] for HF.
The pH of the solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA]), where pKa is the dissociation constant of HF, [A-] is the concentration of F- ions from the salt, and [HA] is the concentration of undissociated HF.
Plugging in the values, the pH of the solution is calculated to be approximately 3.41. Therefore, the solution is acidic with a pH less than 7.
For more about potassium fluoride:
https://brainly.com/question/27549056
#SPJ11
Calculate the ka of a weak acid ha if a 0.19 m aqueous solution of ha has a ph of 4.52 at 25°c.
The Ka of the weak acid HA at 25°C in a 0.19M aqueous solution is 0.0168.
The Ka of a weak acid HA can be calculated using the pH of the solution. The pH of a solution is a measure of the hydrogen ion concentration and is defined as the negative logarithm of the hydrogen ion concentration. At 25°C, a 0.19M aqueous solution of HA has a pH of 4.52.
To calculate the Ka, we must first calculate the hydrogen ion concentration. This can be done by taking the antilog of the negative pH (4.52) which is 0.0032. The Ka of HA can then be calculated as the ratio of the hydrogen ion concentration (0.0032) to the concentration of the acid (0.19). This gives us Ka = 0.0032/0.19 = 0.0168.
know more about aqueous solution here
https://brainly.com/question/26856926#
#SPJ11
1. For 280. 0 mL of a buffer solution that is 0. 225 M in HCHO2 and 0. 300 M in KCHO2, calculate the initial pH and the final pH after adding 0. 028 mol of NaOH. ( Ka(HCHO2)=1. 8×10−4. ) Express your answers to two decimal places. Enter your answers numerically separated by a comma.
2. For 280. 0 mL of a buffer solution that is 0. 295 M in CH3CH2NH2 and 0. 225 M in CH3CH2NH3Cl, calculate the initial pH and the final pH after adding 0. 028 mol of NaOH. ( Kb(CH3CH2NH2)=5. 6×10−4. )
Express your answers to two decimal places. Enter your answers numerically separated by a comma.
1.For the buffer solution containing HCHO2 and KCHO2:
First, we can calculate the moles of HCHO2 and KCHO2 present in the solution:
moles of HCHO2 = (0.225 M) x (0.2800 L) = 0.063 moles
moles of KCHO2 = (0.300 M) x (0.2800 L) = 0.084 moles
Since NaOH is a strong base, it will react completely with the weak acid, HCHO2, to form the conjugate base, CHO2-. We can use the balanced chemical equation to determine the moles of HCHO2 that will react with NaOH:
HCHO2 + NaOH -> H2O + NaCHO2
1 mole of HCHO2 reacts with 1 mole of NaOH. Therefore, since we are adding 0.028 mol of NaOH, 0.028 mol of HCHO2 will react.
The amount of HCHO2 and CHO2- in the buffer solution after the reaction can be calculated as follows:
moles of HCHO2 = 0.063 - 0.028 = 0.035 moles
moles of CHO2- = 0.084 + 0.028 = 0.112 moles
Next, we can calculate the concentration of HCHO2 and CHO2- in the buffer solution after the reaction:
[ HCHO2 ] = moles of HCHO2 / volume of solution = 0.035 moles / 0.2800 L = 0.125 M
[ CHO2- ] = moles of CHO2- / volume of solution = 0.112 moles / 0.2800 L = 0.400 M
Using the Henderson-Hasselbalch equation, we can calculate the initial pH of the buffer solution:
pH = pKa + log([ CHO2- ] / [ HCHO2 ])
pH = -log(1.8x10^-4) + log(0.400 / 0.125)
pH = 3.91
Finally, we can calculate the final pH after the addition of NaOH. The NaOH reacts with HCHO2 to form CHO2-, which will increase the concentration of the conjugate base and decrease the concentration of the weak acid. The new concentrations of HCHO2 and CHO2- are:
[ HCHO2 ] = 0.035 moles / 0.2800 L = 0.125 M
[ CHO2- ] = 0.140 moles / 0.2800 L = 0.500 M
Using the Henderson-Hasselbalch equation again, we can calculate the final pH of the solution:
pH = pKa + log([ CHO2- ] / [ HCHO2 ])
pH = -log(1.8x10^-4) + log(0.500 / 0.125)
pH = 4.32
Therefore, the initial pH of the buffer solution is 3.91, and the final pH after the addition of NaOH is 4.32.
2.For the buffer solution containing CH3CH2NH2 and CH3CH2NH3Cl:
First, we can calculate the moles of CH3CH2NH2 and CH3CH2NH3Cl present in the solution:
moles of CH3CH2NH2 = (0.295 M) x (0.2800 L) = 0.0826 moles
moles of CH3CH2NH3Cl = (0.225 M) x (0.2800 L
Regenerate response
The pressure in Denver, Colorado (elevation 5280 ft), averages about 24.9 in Hg. Convert this pressure to each indicated unit. a. atm, b. mmHg, c. psi, d. Pa.
To convert the pressure from inches of mercury (in Hg) to other units, we can use conversion factors:
1 atm = 29.92 in Hg
1 mmHg = 0.03937 in Hg
1 psi = 0.068046 atm
1 Pa = 0.0002953 in Hg
a. Converting to atm:
Pressure in atm = Pressure in in Hg x (1 atm/29.92 in Hg)
Pressure in atm = 24.9 x (1/29.92)
Pressure in atm = 0.832 atm
b. Converting to mmHg:
Pressure in mmHg = Pressure in in Hg x (1 mmHg/0.03937 in Hg)
Pressure in mmHg = 24.9 x (1/0.03937)
Pressure in mmHg = 632.8 mmHg
c. Converting to psi:
Pressure in psi = Pressure in in Hg x (1 atm/29.92 in Hg) x (1 psi/0.068046 atm)
Pressure in psi = 24.9 x (1/29.92) x (1/0.068046)
Pressure in psi = 0.352 psi
d. Converting to Pa:
Pressure in Pa = Pressure in in Hg x (1 Pa/0.0002953 in Hg)
Pressure in Pa = 24.9 x (1/0.0002953)
Pressure in Pa = 84402 Pa
Therefore, the pressure in Denver, Colorado is approximately 0.831 atm, 632.46 mmHg, 12.22 psi, and 84022 Pa.
Learn more about Colorado
https://brainly.com/question/7978853
#SPJ4
Question 6 of 10
How can the rate constant be determined from the rate law?
A. The rate constant can be calculated from the exponents of the
concentrations.
B. The rate constant is the same thing as the reaction rate for the
reaction.
C. The rate constant is the reaction rate divided by the concentration
terms.
D. The rate constant is the reaction rate multiplied by the
concentration terms.
The rate constant can be calculated from the exponents of the concentrations. Therefore, the correct option is option A.
The chemical kinetics rate law, which connects the molecular concentration of reactants with reaction rate, uses the rate constant as a proportionality factor. The letter k in an equation designates it, which is also referred to as either the consequence rate constant and reaction rate coefficient. The rate constant can be calculated from the exponents of the concentrations.
Therefore, the correct option is option A.
To know more about rate constant, here:
https://brainly.com/question/20305871
#SPJ1
Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100^\circ C.100∘C. Air approaches the tube bank in the normal direction at 20^\circ C20∘C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged staggered with longitudinal and transverse pitches of S_L = S_T = 4 cm.SL=ST=4cm. There are 20 rows in the flow direction with 10 tubes in each row. Determine (a) the rate of heat transfer, (b) and pressure drop across the tube bank, and (c) the rate of condensation of steam inside the tubes. Evaluate the air properties at an assumed mean temperature of 35^\circ C35∘C and 1 atm. Is this a good assumption?
(a) The rate of heat transfer is approximately 25.63 kW.
(b) The pressure drop across the tube bank is approximately 294.53 Pa.
(c) The rate of condensation of steam inside the tubes is approximately 0.023 kg/s.
(a) To calculate the rate of heat transfer, first find the overall heat transfer coefficient (U) using the Nusselt number and thermal conductivity of air. Next, find the total heat transfer area (A_t) using the tube diameter and number of tubes.
Finally, use the log mean temperature difference (LMTD) method to find the heat transfer rate (Q) using the formula Q = U * A_t * LMTD.
(b) To calculate the pressure drop, first find the drag coefficient (C_d) and then use the formula ΔP = (1/2) * ρ_air * V² * Σ(C_d) to calculate the pressure drop across the tube bank, where ρ_air is the air density and V is the mean velocity.
(c) To determine the rate of condensation of steam, use the heat transfer rate (Q) calculated in part (a) and divide it by the latent heat of vaporization (h_fg) of steam at the given temperature. This will give you the mass flow rate of condensation (m_cond).
Assuming air properties at 35°C and 1 atm is reasonable, as it represents the average temperature between the initial and final temperatures of the air in this process.
To know more about Nusselt number click on below link:
https://brainly.com/question/31139431#
#SPJ11
Describe the general solubility of NH3 in water with respect to temperature.
Is KI dissolves in water, does this represent an increase or decrease in entropy
The dissolution of ammonia chloride in water decreases with increase in temperature.
Dissolution of KI in water represents the increase in entropy.
Generally as the temperature of ammonium solution increases, the hydrogen bonding present becomes weaker as the NH₃ molecules are no longer capable of binding with the more energetic H₂O molecules. Therefore, the gas's solubility usually decreases with an effective increase in temperature.
Basically dissolution of a solute normally increases the entropy by effectively spreading the solute molecules and also the thermal energy that the solute molecules contain through the larger volume of the solvent. Hence, entropy increases with dissolution.
Learn more about dissolution from the link given below.
https://brainly.com/question/23851972
#SPJ1
the volume of a gas is proportional to the temperature of a gas is known as avogadro's law. ideal gas law. charles's law. boyle's law. dalton's law.
The volume of a gas is proportional to the temperature of a gas is known as Charles's law. However, it is important to note that there are several other gas laws as well, such as Boyle's law, which states that the volume of a gas is inversely proportional to its pressure, and Dalton's law, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the individual gases.
The ideal gas law is a combination of all these laws and relates the pressure, volume, temperature, and number of moles of a gas.
The statement "the volume of a gas is proportional to the temperature of a gas" is known as Charles's Law. This law states that, for a given amount of gas at constant pressure, the volume is directly proportional to its absolute temperature.
Visit here to learn more about Charles's law brainly.com/question/16927784
#SPJ11
Arrange the following solution; in order of increasing acidity.
Rank solutions from smallest acidity to greatest. To rank items as equivalent, overlap them.
NaCl, NH_4Cl, NaHCO_3, NH_4ClO_2, NaOH
Smallest acidity Largest acidity
To arrange the given solutions in order of increasing acidity, we will consider the acidic properties of their respective ions. The solutions are NaCl, NH4Cl, NaHCO3, NH4ClO2, and NaOH.
1. NaCl: Sodium chloride is a neutral salt, as it comes from a strong acid (HCl) and a strong base (NaOH). Therefore, it has the smallest acidity.
2. NaHCO3: Sodium bicarbonate is a basic salt, as it comes from a weak acid (H2CO3) and a strong base (NaOH).
3. NaOH: Sodium hydroxide is a strong base and has no acidity.
4. NH4Cl: Ammonium chloride is an acidic salt, as it comes from a weak base (NH3) and a strong acid (HCl).
5. NH4ClO2: Ammonium chlorite is also an acidic salt, as it comes from a weak base (NH3) and a strong acid (HClO2). However, HClO2 is a stronger acid than HCl, making NH4ClO2 more acidic than NH4Cl.
In order of increasing acidity, the arrangement is: NaCl (smallest acidity), NaHCO3, NaOH, NH4Cl, and NH4ClO2 (largest acidity).
know more about "acidity of solutions" here: https://brainly.com/question/24255408
#SPJ11
Calculate the potential of the electrochemical cell and determine if it is spontaneous as written at 25 ∘C . Cu(s) ∣∣ Cu2+(0.13 M) ‖‖ Fe2+(0.0013 M) ∣∣ Fe(s) ∘Cu2+/Cu=0.339 V∘Fe2+/Fe=−0.440 Vcell=Is the electrochemical cell spontaneous or not spontaneous as written at 25 ∘C ?
a. The potential of the electrochemical cell: Cu(s) ∣∣ Cu₂⁺(0.13 M) ‖‖ Fe₂⁺(0.0013 M) ∣∣ Fe(s) as written at 25 ∘C is 0.3094 V.
b. The electrochemical cell is spontaneous as written at 25 ∘C.
To calculate the potential of the electrochemical cell, we can use the formula:
Ecell = E°cell - (0.0592/n) log(Q)
where E°cell is the standard potential of the cell, n is the number of electrons transferred, and Q is the reaction quotient.
For the given electrochemical cell:
Cu(s) ∣∣ Cu₂⁺(0.13 M) ‖‖ Fe₂⁺(0.0013 M) ∣∣ Fe(s)
The number of electrons transferred is 2 (from Cu to Fe).
The reaction quotient can be calculated using the concentrations of the species involved:
Q = ([Fe₂⁺]/[Cu₂⁺])
= (0.0013)/(0.13)
= 0.01
Substituting the values:
Ecell = 0.339 V - (0.0592/2) log(0.01)
Ecell = 0.339 V - 0.0296 = 0.3094 V
Since the potential of the electrochemical cell is positive (0.3094 V), the cell reaction is spontaneous as written at 25 ∘C.
Learn more about electrochemical cell: https://brainly.com/question/12034258
#SPJ11
Select all the substances tested (not the reagents or the substances formed) in the qualitative analysis group I scheme nitric acid hot water silver ammonia complex silver ions lead(ll) iodide lead(ll) chloride ammonia hydrochloric acid ammonium nitrate silver chloride potassium iodide Silver iodide lead(II)ions
Here is the list of substances tested:
1. Silver ions (Ag+)
2. Lead(II) ions (Pb2+)
These ions are the primary cations tested in Group I of the qualitative analysis scheme.
The other substances mentioned in the question, such as nitric acid, hot water, ammonia, silver ammonia complex, lead(II) iodide, lead(II) chloride, hydrochloric acid, ammonium nitrate, silver chloride, potassium iodide, and silver iodide, are either reagents used in the testing process or substances formed as a result of the tests.
Group I cations are the first group of cations tested for in qualitative analysis, a laboratory technique used to identify the presence of specific ions in a sample. The presence of silver and lead ions is tested for in this group. The other substances mentioned in the question are used in the testing process or produced as a result of the tests.
For example, nitric acid is used to dissolve the sample being tested, while ammonia is used to make the solution basic for subsequent tests. The silver ammonia complex, lead(II) iodide, lead(II) chloride, silver chloride, potassium iodide, and silver iodide are all formed as a result of specific tests for the presence of silver and lead ions.
The specific tests and reagents used in qualitative analysis depend on the cations being tested for and the desired level of specificity and accuracy.
To know more about "Qualitative analysis" refer here:
https://brainly.com/question/31420309#
#SPJ11
the following structure does not obey the octet rule. group of answer choices A. co2 B. so3 C. cbr4 D. ccl4 E. co32-
The structure that does not obey the octet rule is C. cbr4. This is because carbon tetrabromide (CBr4) has a central carbon atom surrounded by four bromine atoms. Each bromine atom forms a single covalent bond with the central carbon atom, resulting in a total of four covalent bonds.
However, bromine atoms have seven valence electrons, and carbon has only four valence electrons. Therefore, in CBr4, the central carbon atom has only eight electrons in its valence shell instead of the required eight electrons to satisfy the octet rule B. SO3 (Sulfur Trioxide).
A. CO2 (Carbon Dioxide) - Carbon forms double bonds with both Oxygen atoms, achieving a stable octet for each atom.C. CBr4 (Carbon Tetrabromide) - Carbon forms single bonds with four Bromine atoms, resulting in a stable octet for each atom.D. CCl4 (Carbon Tetrachloride) - Similar to CBr4, Carbon forms single bonds with four Chlorine atoms, leading to a stable octet for each atom.E. CO3^2- (Carbonate Ion) - Carbon forms double bonds with one Oxygen atom and single bonds with the other two Oxygen atoms. Each Oxygen atom has two lone pairs, while the singly-bonded Oxygens carry a -1 charge each, resulting in a stable octet for all atoms.
In SO3, Sulfur forms double bonds with three Oxygen atoms. While the Oxygen atoms achieve stable octets, the Sulfur atom ends up with 12 electrons in its valence shell, thus not obeying the octet rule.
To learn more about covalent bonds:- https://brainly.com/question/10777799
#SPJ11
How does the magnitude of Hmix compare with the magnitude of Hsolute+Hsolvent for exothermic solution processes?
A) The magnitude of Hmix will be larger than the magnitude of Hsolute+Hsolvent .
B) The magnitude of Hmix will be equal to the magnitude of Hsolute+Hsolvent .
C) The magnitude of Hmix will be smaller than the magnitude of Hsolute+Hsolvent
The magnitude of Hmix compared with the magnitude of Hsolute+Hsolvent for exothermic solution processes is Option C- The magnitude of Hmix will be smaller than the magnitude of Hsolute+Hsolvent,
For exothermic solution processes, the overall enthalpy change is negative (i.e. heat is released). The enthalpy change for mixing (Hmix) is typically negative for an ideal solution, meaning that energy is released when the solute and solvent are mixed together.
The enthalpy change for solvation (Hsolute+Hsolvent) is also negative, as energy is released when the solute particles interact with the solvent particles. Since both Hmix and Hsolute+Hsolvent are negative for exothermic solution processes, the magnitudes of the two enthalpy changes will be additive. Hence , option C is correct.
Learn more about exothermic process here:
https://brainly.com/question/2924714
#SPJ11
a student mixes 37.0 ml of 3.34 m pb(no3)2(aq) with 20.0 ml of 0.00245 m na2so4(aq) . how many moles of pbso4(s) precipitate from the resulting solution? the sp of pbso4(s) is 2.5×10−8 .
0.000049 moles of PbSO4(s) precipitate from the resulting solution
HOw moles of pbso4(s) precipitate from the resulting solution?A student mixes 37.0 mL of 3.34 M Pb(NO3)2(aq) with 20.0 mL of 0.00245 M Na2SO4(aq). To find the moles of PbSO4(s) precipitate from the resulting solution, follow these steps:
Learn more about resulting solution
brainly.com/question/31358971
#SPJ11
0.000049 moles of PbSO4(s) precipitate from the resulting solution
HOw moles of pbso4(s) precipitate from the resulting solution?A student mixes 37.0 mL of 3.34 M Pb(NO3)2(aq) with 20.0 mL of 0.00245 M Na2SO4(aq). To find the moles of PbSO4(s) precipitate from the resulting solution, follow these steps:
Learn more about resulting solution
brainly.com/question/31358971
#SPJ11
a 30 ml sample of 0.15m hydrazine (kb =1.3x10-6) is being titrated with 0.2m hclo4. what is the when 10 ml of acid are added after the equivalence point?
By considering the concentrations of these two species as well as the p K an of the weak acid, the Henderson-Hasselbalch equation enables you to determine the pH of a buffer solution that comprises a weak acid and its conjugate base.
Hypochlorous acid (HClO), in your situation, is the weak acid. One of its salts, potassium hypochlorite, or KClO, introduces the hypochlorite anion, the conjugate base of the compound, into the solution.Make an educated guess as to what the solution's pH will be in relation to the acid's p K a before performing any calculations. Be aware that the log term will equal zero if the weak acid and conjugate base concentrations are equal.
To know more about Henderson-Hasselbalch, click here:
https://brainly.com/question/13423434
#SPJ4
How much NaOH solution did you use from the buret. The following data is given: Initial buret reading: 2.80 mL Final buret reading: 15.45 mL 1 18.25 mL 2 12.35 mL 3 12.65 mL 4 13.60 mL
12.65 mL of NaOH solution is used from the burret. Determined from the following data is given: Initial buret reading: 2.80 mL Final buret reading: 15.45 mL 1 18.25 mL 2 12.35 mL 3 12.65 mL 4 13.60 mL
To determine the amount of NaOH solution used from the buret, we need to subtract the initial buret reading from the final buret reading.
Final buret reading - Initial buret reading = amount of NaOH solution used
15.45 mL - 2.80 mL = 12.65 mL
Therefore, 12.65 mL of NaOH solution was used from the buret. The additional data provided (1, 2, 3, and 4) does not have any relevance to this specific question.
Hi! To calculate the amount of NaOH solution used from the buret, you need to subtract the initial buret reading from the final buret reading. In this case:
Final buret reading: 15.45 mL
Initial buret reading: 2.80 mL
Amount of NaOH solution used = Final buret reading - Initial buret reading
Amount of NaOH solution used = 15.45 mL - 2.80 mL
Amount of NaOH solution used = 12.65 mL
So, you used 12.65 mL of NaOH solution from the buret.
Visit here to learn more about NaOH solution : https://brainly.com/question/14296114
#SPJ11
draw the amide that forms when propylamine (ch3ch2ch2nh2) is heated with
The amide formed when propylamine (CH₃CH₂CH₂NH₂) is heated with an acid is propylamide (CH₃CH₂CH₂CONH₂).
To form an amide, propylamine (CH₃CH₂CH₂NH₂) needs to react with a carboxylic acid. During this reaction, the -NH₂ group of propylamine will react with the -COOH group of the carboxylic acid.
First, you would deprotonate the carboxylic acid to form a carboxylate anion. Next, the lone pair on the nitrogen atom of propylamine will attack the carbonyl carbon atom of the carboxylate anion, forming an intermediate.
Finally, the oxygen atom will regain its electron pair and expel a hydroxide ion. The product will be propylamide (CH₃CH₂CH₂CONH₂) and a molecule of water.
To know more about carboxylic acid click on below link:
https://brainly.com/question/31050542#
#SPJ11
How could identification of lysine decarboxylase or lysine deaminase be useful in understanding how to counteract the infection of an organism that is LDC positive and LDA negative. Explain scientist engineer an antibiotic specific to this organism (assume all beneficial organisms are LDC and LDA negative).
Identification of lysine decarboxylase or lysine deaminase in an organism can help in developing targeted antibiotics to counteract the infection.
Lysine decarboxylase (LDC) and lysine deaminase (LDA) are enzymes involved in amino acid metabolism in bacteria. If an organism is LDC positive and LDA negative, it means that it can produce lysine decarboxylase but cannot produce lysine deaminase.
This information can be useful in understanding the metabolic pathways and virulence of the organism, which can aid in the design of antibiotics that specifically target the LDC pathway to disrupt the growth and survival of the organism.
By inhibiting the activity of lysine decarboxylase, a potential antibiotic could block the production of important metabolites required for the pathogen's survival, leading to the development of effective treatment strategies against infections caused by such organisms.
For more questions like Antibiotic click the link below:
https://brainly.com/question/30012458
#SPJ11
which salts will be more soluble in an acidic solution than in pure water? baso3 caso4 cd(oh)2 pbi2 kclo4
Among the given salts, the one that will be more soluble in an acidic solution than in pure water is [tex]KClO_{4}[/tex] (potassium perchlorate).
This is because [tex]KClO_{4}[/tex] is a strong oxidizing agent and can react with water to form perchloric acid ([tex]HClO_{4}[/tex]), which is a strong acid. The presence of excess [tex]H^{+}[/tex] ions in the acidic solution will decrease the solubility of many salts, but in the case of [tex]KClO_{4}[/tex], it will increase the solubility due to the formation of the highly soluble potassium perchlorate salt.
On the other hand, the other salts mentioned in the question, [tex]BaSO_{3}[/tex](barium sulfite), [tex]CaSO_{4}[/tex](calcium sulfate), [tex]Cd(OH)_{2}[/tex] (cadmium hydroxide), and [tex]PbI_{2}[/tex] (lead iodide), are all sparingly soluble or insoluble in pure water and will remain so in an acidic solution.
Learn more about acidic solution
https://brainly.com/question/16926229
#SPJ4
Classify each of the following solutions as hypotonic, isotonic, or hypertonic relative to red blood cells?a. 0.28 M glucoseb. 0.28 M in both glucose and sucrosec. 0.14 M in both glucose and sucrosed. 0.28 M NaCl
0.28 M glucose is hypotonic; 0.28 M in both glucose and sucrose is hypertonic; 0.14 M in both glucose and sucrose is isotonic; and, 0.28 M NaCl is hypertonic.
a. 0.28 M glucose: This solution is hypotonic. A hypotonic solution has a lower solute concentration than the cell's cytoplasm, causing water to flow into the cell and potentially leading to cell swelling or bursting.
b. 0.28 M in both glucose and sucrose: This solution is hypertonic. A hypertonic solution has a higher solute concentration than the cell's cytoplasm, causing water to flow out of the cell, which can lead to cell shrinkage.
c. 0.14 M in both glucose and sucrose: This solution is isotonic. An isotonic solution has a solute concentration equal to the cell's cytoplasm, resulting in no net movement of water across the cell membrane and maintaining the cell's shape and size.
d. 0.28 M NaCl: This solution is hypertonic. Similar to the explanation for solution b, this solution has a higher solute concentration than the cell's cytoplasm, causing water to flow out of the cell and leading to red blood cell shrinkage.
To learn more about hypotonic, isotonic, and hypertonic, visit: https://brainly.com/question/18147579
#SPJ11
An unsaturated hydrocarbon (CsHs) undergoes Markovnikov's rule to give (A). Compound (A) is hydrolysed with aqueous alkali to yield (B). When (B) is treated with PBrs, compound (C) is produced. (C) reacts with AgCN (alc.) to give another compound (D). The compound (D) if reduced with LIA/H, produce (E).
An unsaturated hydrocarbon (CsHs) undergoes Markovnikov's rule to give (A). Compound (A) is hydrolysed with aqueous alkali to yield (B). When (B) is treated with PBrs, compound (C) is produced. (C) reacts with AgCN (alc.) to give another compound (D). The compound (D) if reduced with LIA/H, produce (E).
First, we know that the unsaturated hydrocarbon CsHs undergoes Markovnikov's rule. This means that the more electronegative atom will add to the carbon with the fewer hydrogen atoms. Based on this information, we can assume that compound A is a product of the addition of a proton and a more electronegative atom (such as a halogen or oxygen) to the unsaturated hydrocarbon.
Compound A is then hydrolyzed with aqueous alkali to yield compound B. This suggests that compound A contains a functional group that is susceptible to hydrolysis by base, such as an ester or an amide.
When compound B is treated with PBrs, compound C is produced. PBrs is a reagent used to test for the presence of halogens in a compound. This suggests that compound B contains a halogen, possibly added in the addition reaction with the unsaturated hydrocarbon.
Compound C reacts with AgCN (alc.) to give another compound, D. AgCN (alc.) is a reagent commonly used for the synthesis of nitriles from halides. This suggests that compound C contains a halogen atom that can be replaced by a cyano group (CN-) to form a nitrile.
Finally, compound D can be reduced with LIA/H to produce compound E. LIA/H is a reducing agent commonly used for the reduction of nitriles to primary amines. This suggests that compound D is a nitrile, which can be converted to a primary amine via reduction.
Hence, we can infer that the unsaturated hydrocarbon CsHs undergoes addition with a more electronegative atom according to Markovnikov's rule to form compound A. Compound A is then hydrolyzed to form compound B, which contains a halogen. Compound B is then converted to a nitrile (compound C) using PBrs, and compound C is converted to a primary amine (compound D) via reaction with AgCN (alc.) and subsequent reduction with LIA/H to produce compound E.
To know more about Markovnikov's rule here
https://brainly.com/question/30274769
#SPJ1
A proton with an initial speed of 8.10×105 m/s is brought to rest by an electric field. A:Did the proton move into a region of higher potential or lower potential? higher potential lower potential
The work done by the electric field on the proton is:W = -ΔPE = -5.36 x 10^-14 J
The proton has a positive charge, and it is brought to rest by an electric field. Therefore, we know that the electric field is directed opposite to the direction of motion of the proton, or in the direction of the force on the proton. The work done by the electric field on the proton can be calculated using the equation:W = -ΔPE.where W is the work done, ΔPE is the change in potential energy, and the negative sign indicates that the electric field is doing work on the proton. Since the proton is brought to rest, its final kinetic energy is zero.
Therefore, the work done by the electric field must be equal to the initial kinetic energy of the proton:W = KEi = 0.5mv^2where m is the mass of the proton and v is its initial speed.Using the given initial speed of the proton, we can calculate its initial kinetic energy:KEi = 0.5mv^2 = 0.5 x 1.67 x 10^-27 kg x (8.10 x 10^5 m/s)^2 = 5.36 x 10^-14 J
Therefore, the work done by the electric field on the proton is:W = -ΔPE = -5.36 x 10^-14 J
Since the electric field is doing work on the proton, the proton is moving into a region of lower potential.
Learn more about proton here:https://brainly.com/question/1481324
#SPJ11
what is the ph of a 0.400 m solution of aniline, coh,nh»? the ko of cohsnh2 is 4.27 x 10-10,
The pH of a 0.400 M solution of aniline is 9.22
Aniline, C6H5NH2, is a weak base. It undergoes partial ionization in water to form its conjugate acid, C6H5NH3+, and hydroxide ions, OH-. The equilibrium reaction for the ionization of aniline can be represented as follows:
C6H5NH2 + H2O ⇌ C6H5NH3+ + OH-
The equilibrium constant for this reaction is denoted as Kb, which is the equilibrium constant for the ionization of a base. The relationship between Kb and Kw (the ion product constant for water) is Kw = Kw = Ka x Kb, where Ka is the ionization constant for water (1.0 x 10^-14 at 25°C).
Given that Kb for aniline is not provided, we can use the given value of Ko, which is the equilibrium constant for the ionization of the conjugate acid of aniline, C6H5NH3+, to calculate Kb using the relationship Kb = Kw / Ka.
Ka can be calculated using the formula Ka = 1 / Ko.
Let's calculate Ka and then use it to calculate Kb:
Given:
Ko = 4.27 x 10^-10
Calculation of Ka:
Ka = 1 / Ko
Ka = 1 / (4.27 x 10^-10)
Ka ≈ 2.34 x 10^9
Calculation of Kb:
Kb = Kw / Ka
Kb = (1.0 x 10^-14) / (2.34 x 10^9)
Kb ≈ 4.27 x 10^-24
Now that we have the value of Kb, we can use it to calculate the pH of the 0.400 M solution of aniline using the following formula:
pH = 1/2 * (-log10(Kw)) + 1/2 * (-log10(Kb)) + 1/2 * (-log10(c))
where Kw is the ion product constant for water (1.0 x 10^-14), Kb is the ionization constant of aniline (calculated as 4.27 x 10^-24), and c is the concentration of aniline in the solution (0.400 M).
Substituting the values:
pH = 1/2 * (-log10(1.0 x 10^-14)) + 1/2 * (-log10(4.27 x 10^-24)) + 1/2 * (-log10(0.400))
pH ≈ 9.22
To learn more on PH solutions https://brainly.com/question/12980007
#SPJ11
draw the corresponding structure and stereochemistry of the major organic product(s) in the reaction of 2-methyl-2-pentene with h2so4 / h2o.
The product is a chiral molecule, and the stereochemistry at the newly formed stereocenter is R due to the Markovnikov addition.
The reaction of 2-methyl-2-pentene with H₂SO₄/H₂O is an acid-catalyzed hydration reaction, which involves the addition of water across the double bond. The mechanism proceeds through a carbocation intermediate and results in the formation of a mixture of products.
The major product is obtained through Markovnikov addition, where the hydrogen atom adds to the carbon atom of the double bond that has the most hydrogen atoms attached to it.
The structure and stereochemistry of the major product in this reaction are shown below;
H
|
H₃C -- C -- CH(CH₃)₂
|
CH₃
|
OH
The major product is 2-methyl-2-pentanol. The addition of water across the double bond has resulted in the formation of a new stereocenter at the carbon atom that was originally part of the double bond. The product is a chiral molecule, and the stereochemistry at the newly formed stereocenter is R due to the Markovnikov addition.
To know more about stereochemistry here
https://brainly.com/question/28658912
#SPJ4
Calculate the molarity when 345.0g of Na2SO4, is dissolved to make a 1.650L. solution. (include units and round to 4 sig figs)
Answer:
Therefore, the molarity of the solution is 1.471 M (molar)
Explanation:
To calculate the molarity of a solution, we need to know the moles of solute (Na2SO4) and the volume of the solution (in liters).
First, let's calculate the moles of Na2SO4:
molar mass of Na2SO4 = 2(22.99 g/mol) + 1(32.06 g/mol) + 4(16.00 g/mol) = 142.04 g/mol
moles of Na2SO4 = (mass of Na2SO4) / (molar mass of Na2SO4)
moles of Na2SO4 = 345.0 g / 142.04 g/mol
moles of Na2SO4 = 2.430 mol
Next, let's calculate the molarity of the solution:
Molarity = (moles of solute) / (volume of solution in liters)
Molarity = 2.430 mol / 1.650 L
Molarity = 1.471 M
Therefore, the molarity of the solution is 1.471 M (molar)