certain fireworks shoot sparks for 2.5 seconds, leaving a trail. after how many seconds might the pyrotechnician want the fireworks to begin firing in order to for the sparks to be at the maximum height? Explain.

1) average power delivered to the circuit is 4.11 Watts. 2) the maximum power delivered to the circuit is 16.4 watts

To find the average power delivered to the circuit, we can use the formula Ohm's Law:
P_avg = V² / R
where P_avg is the average power, V is the voltage, and R is the resistance.
Substituting the given values, we get:
P_avg = (121²) / 3.53k
P_avg = 4.11 watts
Therefore, the average power delivered to the circuit is 4.11 watts.
To find the maximum power delivered to the circuit, we can use the formula:
P_max = (V²) / (4R)
where P_max is the maximum power.
Substituting the given values, we get:
P_max = (121²) / (4 x 3.53k)
P_max = 16.4 watts
Therefore, the maximum power delivered to the circuit is 16.4 watts.

Learn more about Ohm's Law here

https://brainly.com/question/1247379

#SPJ11

Up until now, 2/3 of the road has been finished and this part of the road is 3/4 of a mile long. So, when the road is a mile long, only 1/9 of the road will be complete.

First, we know that 2/3 of the road has been completed, and this portion is 3/4 of a mile long. We can represent this on a number line by dividing it into 12 equal parts (since 3/4 is equivalent to 9/12).

We can see that 2/3 of the road is equivalent to 8/12 of the road, so we can represent the length of the entire road as 12 parts. This means that each part represents 1/12 of a mile.

To find the length of the entire road, we can use a ratio:

8/12 = 3/4

x/12 = 1/4    (since 1 - 2/3 = 1/3, which is equivalent to 4/12)

Solving for x, we get:

x = 3/4 * 12

x = 9

So the length of the entire road is 9 miles.

To find out what fraction of the road is complete when the road is 1 mile long, we can divide 1 by the length of the entire road: 1/9

So when the road is 1 mile long, 1/9 of the road will be complete.

Learn more about fractions here:

https://brainly.com/question/10354322

#SPJ1

1) The frequency is 10 Hz. 2) The period is 0.025 s.


1) To find the frequency (f) of an oscillating object with a period of 0.10 s, you can use the following formula:
f = 1/T
where f is the frequency and T is the period.

In this case, T = 0.10 s. Plugging in the value, we get:
f = 1/0.10
f = 10 Hz

So, the frequency of the oscillating object is 10 Hz.

2) To find the period (T) of an oscillating object with a frequency of 40 Hz, you can use the same formula:
T = 1/f
where T is the period and f is the frequency.

In this case, f = 40 Hz. Plugging in the value, we get:
T = 1/40
T = 0.025 s

So, the period of the oscillating object is 0.025 seconds.

Know more about frequency here:

https://brainly.com/question/254161

#SPJ11

At  1.29 T/s rate must the magnitude of B change in order to induce a current of 0.392 A in the windings of the coil.

Using Faraday's Law, we can relate the induced EMF (voltage) to the rate of change of magnetic flux through the coil:

[tex]EMF = -N(dΦ/dt)[/tex]

where N is the number of turns in the coil, and Φ is the magnetic flux through the coil. The negative sign indicates that the induced EMF opposes the change in flux.

We can also relate the EMF to the current and resistance:

EMF = IR

Combining these equations, we can solve for the rate of change of magnetic flux:

[tex](dΦ/dt) = -EMF/N = (-IR)/N[/tex]

Plugging in the given values, we get:

[tex](dΦ/dt) = (-0.392 A x 12.7 Ω) / 147 = -0.0337 Wb/s[/tex]

Since the magnetic field is perpendicular to the plane of the coil, the magnetic flux through the coil is given by: [tex]Φ = BAN[/tex]

where A is the area of the coil (5 cm x 8 cm = 0.04 m^2). Solving for the rate of change of magnetic field:

[tex](dB/dt) = (dΦ/dt) / AN = (-0.0337 Wb/s) / (0.04 m^2 x 147) = -1.29 T/s[/tex]

Therefore, the magnitude of the magnetic field must decrease at a rate of 1.29 T/s in order to induce a current of 0.392 A in the coil.

learn more about magnitude here:

https://brainly.com/question/30881682

#SPJ11

For the light beam

a) The index of refraction is 2.24.

b) The wavelength of the same light in air is 551.04 nm.

c) the angle is 17.14°.

(a) The refraction index of the diamond at this wavelength can be found using the formula n=c/v, where c is the speed of light in a vacuum and v is the speed of light in a diamond.

n = c/v = 3.00 x 10^8 m/s / 1.34 x 10^8 m/s = 2.24

Therefore, the index of refraction of the diamond at this wavelength is 2.24.

(b) When light travels through air, its wavelength changes due to the change in the medium, but its frequency remains the same. The relationship between the speed, frequency, and wavelength of light is given by the formula c = λf, where c is the speed of light, λ is the wavelength, and f is the frequency.

We can rearrange this formula to solve for the new wavelength:

λ_air = c/f = (c/v) λ_diamond = n λ_diamond

where n is the index of refraction of a diamond. Substituting the values given,

λ_air = 2.24 x 246 nm = 551.04 nm

Therefore, the wavelength of the same light in air is 551.04 nm.

(c) According to Snell's law, n1 sinθ1 = n2 sinθ2, where n1 and n2 are the indices of refraction of the initial and final mediums, and θ1 and θ2 are the angles of incidence and refraction, respectively, with respect to the normal.

We can rearrange this formula to solve for θ2:

sinθ2 = (n1 / n2) sinθ1

Substituting the values given, we get:

sinθ2 = (1 / 2.24) sin 15°

θ2 = sin⁻¹(0.295) = 17.14°

Therefore, the angle at which the light ray will be refracted into the air is 17.14°.

Leran more about  Snell's law

brainly.com/question/2273464

#SPJ11

The force on Q1 due to Q2 is attractive and directed in the +x direction. The correct option is a). To determine the correct answer, we'll use Coulomb's Law which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

The charges are Q1 = -0.10 μC (located at the origin) and Q2 = +10 μC (located on the positive x-axis at x = 1.0m).

Since Q1 is negative and Q2 is positive, the force between them will be attractive. This is because opposite charges attract each other. The attractive force on Q1 will be directed towards Q2, which is in the positive x direction.

Therefore, it is attractive and directed in the +x direction.

To know more about Coulomb's Law refer here:

https://brainly.com/question/506926#

#SPJ11

The peak voltage across the bulb is approximately 17V. The correct answer is A. 17V.

For the 12V, 50W halogen bulb in a desk lamp, you need to determine the peak voltage when the bulb's rating refers to the RMS voltage. The relationship between RMS voltage and peak voltage is:
RMS voltage = peak voltage / √2
To find the peak voltage, rearrange the equation:
peak voltage = rms voltage * √2
Given the RMS voltage is 12V:
peak voltage = 12V * √2 ≈ 12V * 1.414 ≈ 17V
So, the peak voltage across the bulb is approximately 17V. Your answer is A. 17V.

Learn more about RMS voltage here: https://brainly.com/question/18883096

#SPJ11

The allowable torque T if the thickness of the outer skin is 12mm and the thickness of the inner web is 6mm is 3.78 kN-m.

To calculate the allowable torque T, we need to first determine the shear stress and angle of twist in the beam. Using the given information, we can calculate the shear flow in each segment of the cross-section as follows:

a. For the top segment:

q = V / (t * b)

where V is the shear force, t is the thickness of the segment (12mm), and b is the width of the segment (half of the overall width of the beam, which we don't know yet).

From the given torque values, we can calculate the shear force:

V = (Taw - To) / (d / 2)

where d is the distance between the segments, which is given as 119-91 = 28mm.

Plugging in the values, we get:
V = (245.8 - 145.3) / (28 / 1000 / 2)

= 36100 N

Now we can calculate the width of the segment:

b = (Taw - To) / (t * q)

Plugging in the values, we get:

b = (245.8 - 145.3) / (12 / 1000 * 36100)

= 0.156 m

b.For the bottom segment:

q = V / (t * b)

Using the same values as before, we get:

q = 36100 / (6 / 1000 * 0.156)

= 385986 N/m (Note that this value is negative because the shear flow direction is opposite to the one assumed.)

Next, we can calculate the maximum shear stress in the beam:

τmax = q / h

where h is the distance between the neutral axis and the outer skin, which is given as 6 + 12 / 2 = 12 mm.

Plugging in the values, we get:

τmax = 385986 / (12 / 1000) = 32165.5 Pa

Converting to MPa, we get:

τmax = 32.165 MPa

To check if this value is within the allowable limit of Tall-60MPa, we need to calculate the safety factor:

SF = Tall / τmax

Plugging in the values, we get:

SF = 60 / 32.165

= 1.865

Since the safety factor is greater than 1, the shear stress is within the allowable limit.

Finally, we can calculate the allowable angle of twist using the formula:

θ = T * L / (G * J)

where L is the length of the beam (4m), and J is the polar moment of inertia of the cross-section.

For a solid circular section, J = π/2 * (R⁴ - r⁴), where R is the outer radius and r is the inner radius.

In our case, we don't have a circular section, but we can approximate it as one with an equivalent radius:

J ≈ π/2 * (R⁴ - r⁴)

where R = (12 + 6) / 2 = 9 mm and r = 6 mm.

Plugging in the values, we get:

J ≈ 4.05e⁻⁸ m⁴

Now we can calculate the allowable torque T:

T = θ * G * J / L

Plugging in the values, we get:

T = 3° * π/180 * 28e⁹ Pa * 4.05e⁻⁸ m⁴ / 4 m

T ≈ 3.78 kN-m

Therefore, the allowable torque for the given beam is approximately 3.78 kN-m.

Learn more about torque: https://brainly.com/question/29024338

#SPJ11

The electric field in the wire is approximately 2.94 x 10⁶ V/m, and the electron drift speed in the wire is approximately 0.0018 m/s.

The electric field in a wire carrying current is given by the equation E = I/(πr²σ), where I is the current, r is the radius of the wire, and σ is the conductivity of the material. For silver, the conductivity is approximately 6.17 x 10⁷ S/m.

Substituting the given values, we get:

E = (30.0 x 10⁻³ A)/(π x (0.255 x 10⁻³ m)² x 6.17 x 10⁷ S/m) ≈ 2.94 x 10⁶ V/m.

The electron drift speed in a wire can be found using the equation v = I/(nAq), where n is the number density of free electrons in the material, A is the cross-sectional area of the wire, and q is the elementary charge. For silver, the number density of free electrons is approximately 5.86 x 10²⁸ m⁻³.

Substituting the given values, we get:

v = (30.0 x 10⁻³ A)/(5.86 x 10²⁸ m⁻³ x π x (0.255 x 10⁻³ m)² x (1.602 x 10⁻¹⁹C)) ≈ 0.0018 m/s.

Therefore, the electric field in the wire is approximately 2.94 x 10⁶ V/m, and the electron drift speed in the wire is approximately 0.0018 m/s.

To know more about drift speed click on below link:

https://brainly.com/question/16966226#

#SPJ11

The polar form of the complex number is z = 50∠53.13°.(C)

The polar form of a complex number can be represented as z = r∠θ, where r is the magnitude and θ is the angle in degrees or radians. To convert a complex number from rectangular form to polar form, we can use the following formulas:

r = |z| = √(Re(z)² + Im(z)²)

θ = arg(z) = tan⁻¹(Im(z) / Re(z))

where Re(z) and Im(z) are the real and imaginary parts of the complex number, respectively.

For the complex number 30 + j40, we have:

|z| = √(30² + 40²) = 50

arg(z) = tan⁻¹(40 / 30) = 53.13°(C)

To know more about polar form  click on below link:

https://brainly.com/question/11741181#

#SPJ11

To prevent a transistor from going into cutoff or saturation when an input signal is applied, proper biasing, signal limiting, coupling, and feedback can all contribute.

There are several measures that can be taken.

One method is to choose appropriate biasing resistors to set the DC voltage levels at the base, emitter, and collector terminals of the transistor. This will ensure that the transistor operates within its active region, avoiding cutoff or saturation. Additionally, the input signal should be limited to a certain range to avoid overdriving the transistor. A coupling capacitor can be used to block any DC voltage that may affect the biasing of the transistor.

Finally, a feedback loop can be implemented to stabilize the operating point of the transistor and prevent it from going into cutoff or saturation. Overall, proper biasing, signal limiting, coupling, and feedback can all contribute to preventing a transistor from going into cutoff or saturation when an input signal is applied.

Therefore,  By following these steps, you can prevent a transistor from going into cutoff or saturation when an input signal is applied, ensuring proper and linear operation of the transistor.

To know more about  transistor refer here :

https://brainly.com/question/1426190

#SPJ11

The lattice planes with Miller indices (100) and (011) in a simple cubic lattice are perpendicular to each other.

The lattice planes with Miller indices (100) and (011) can be sketched as follows:

(100) plane:

The plane intercepts the x-axis at (1,0,0).

The plane is parallel to the yz-plane, and hence its normal vector is along the x-axis.

The plane intersects the yz-plane at the midpoint of the y and z axes.

The lattice points located at the corners of the cube lying on the plane are connected to form a square.

(011) plane:

The plane intercepts the x-axis at (0,1,1).

The plane is not parallel to any of the coordinate planes, and hence its normal vector has non-zero components in all three directions.

The plane intersects the yz-plane at the points where the y and z coordinates are equal.

The lattice points located at the corners of the cube lying on the plane are connected to form a rhombus.

Lattice planes are a fundamental concept in crystallography, which is the study of the arrangement of atoms in crystals. A crystal lattice is a three-dimensional arrangement of points, known as lattice points, which represent the positions of the atoms in the crystal. A lattice plane is a plane that contains a row of lattice points.

In crystallography, lattice planes are important because they determine the physical properties of a crystal. For example, the angle between two adjacent lattice planes determines the diffraction pattern of X-rays that are scattered by the crystal. The diffraction pattern provides information about the crystal structure, such as the spacing between atoms.

To learn more about Lattice planes visit here:

brainly.com/question/31489989

#SPJ4

According to the question the train's speed is 32 m/s. Speed is a rate at which something moves or happens.

It is typically measured in terms of distance per unit of time, such as metres per second or miles per hour. It is a scalar quantity as it does not have a direction. Speed is an important concept in a wide range of scientific and everyday applications. It is used to measure the rate at which objects move, like in athletics, or the rate at which chemical reactions happen, such as in pharmacology. It is also important in the study of the movement of waves and electromagnetic radiation.

The train's speed can be calculated by dividing the distance covered (960 meters) by the time taken (30 s).

Speed = 960 meters / 30 s

Speed = 32 m/s.

To learn more about speed

https://brainly.com/question/3004254

#SPJ1

The current I in the solenoid windings if an ideal solenoid is wound with 470 turns on a wooden form that is 4.0 cm in diameter and 50 cm long is 3.5 A (Option A).

To find the current I in the solenoid windings, you can use the formula for the magnetic field of an ideal solenoid: B = μ₀ × n × I, where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.

Given values are:

B = 4.1 mT = 4.1 × 10⁻³ T
μ₀ = 4π × 10⁻⁷ T × m/A
Total turns N = 470
Length of solenoid L = 50 cm = 0.5 m

First, find the number of turns per unit length:
n = N / L = 470 / 0.5 = 940 turns/m

Now, plug in the values into the formula:
4.1 × 10⁻³ T = (4π × 10⁻⁷ T × m/A) × 940 turns/m × I

Solve for I:

I = (4.1 × 10⁻³ T) / [(4π × 10⁻⁷ T × m/A) ÷ 940 turns/m]

≈ 3.5 A

So the current I in the solenoid windings is approximately 3.5 A (option A).

Learn more about current: https://brainly.com/question/29341584

#SPJ11

The next longest wavelength is approximately 720 nm.

The energy levels of an electron in a one-dimensional box are given by:

E_n = (n^2 * h^2)/(8mL^2)

where n is the quantum number, h is Planck's constant, m is the mass of the electron, and L is the length of the box.

The longest wavelength photon that the electron can absorb is the one that excites it from the ground state (n=1) to the first excited state (n=2), such that the energy of the photon matches the energy difference between these two levels:

E_photon = E_2 - E_1 = (4-1)h^2/(8mL^2) = 3h^2/(8mL^2)

The corresponding wavelength of this photon can be found using the equation:

λ = c/f = hc/E_photon

where c is the speed of light, f is the frequency of the photon, and λ is its wavelength.

Substituting the given values, we get:

λ_1 = hc/E_photon = hc * 8mL^2 / 3h^2 = 8mcL^2/3h

λ_1 = 540 nm = 540 * 10^-9 m

Solving for L, we get:

L = √(3hλ_1/8mc)

Substituting this value of L in the expression for E_photon, we get the energy of the next excited state (n=3):

E_photon' = E_3 - E_1 = (9-1)h^2/(8mL^2) = 8h^2/(8mL^2)

The wavelength of the photon that corresponds to this energy difference can be found as before:

λ_2 = hc/E_photon' = hc * 8mL^2 / 8h^2 = mcL^2/h

Therefore, the next longest-wavelength photon that the electron can absorb is:

λ_2 = mcL^2/h = (9.11×10^-31 kg)(√(3hλ_1/8mc))^2/h

Substituting the given values, we get:

λ_2 ≈ 720 nm

Therefore, the next longest-wavelength photon that the electron can absorb, starting from the ground state, has a wavelength of approximately 720 nm.

Learn more about Planck's constant

brainly.com/question/30763530?referrer=searchResults

#SPJ11

A. The wheel's constant angular acceleration is 66.88 rad/s².
B. The angular velocity at t = 3.20 s is 326.25 rad/s.
C. The angular velocity at t = 0 is 548.01 rad/s.
D. The wheel turned through an angle of 1401.44 radians between t = 0 and t = 3.20 s.

A. To calculate the angular acceleration (α), divide the tangential acceleration (10.7 m/s²) by the radius (0.160 m): α = 10.7 / 0.160 = 66.88 rad/s².

B. To find the angular velocity (ω) at t = 3.20 s, divide the tangential speed (51.0 m/s) by the radius (0.160 m): ω = 51.0 / 0.160 = 326.25 rad/s.

C. Use the formula ω_final = ω_initial - α*t to find the angular velocity at t = 0: 326.25 = ω_initial - 66.88 * 3.20, thus ω_initial = 548.01 rad/s.

D. To find the angle turned (θ), use the formula θ = ω_initial*t + 0.5*(-α)*t²: θ = 548.01 * 3.20 + 0.5 * (-66.88) * 3.20² = 1401.44 radians.

To know more about angular acceleration click on below link:

https://brainly.com/question/29428475#

#SPJ11

Yes I agree. The socio historical concept implies that race is created and maintained through systems of power and inequality.

According to Michael Omi and Howard Winant, in "Racial Formations," race is a socio-historical concept that is constructed through the intersection of cultural, political, and economic forces.

In this book, they argue that race is not an immutable, biologically determined characteristic of individuals or groups but rather a social construct that is created and maintained through systems of power and inequality. The authors illustrate how race is constructed through examples from different historical periods and social contexts.

Learn more about race here: https://brainly.com/question/28138343

#SPJ1

I. System: Woman + barbell + Earth For the system consisting of the woman, the barbell, and the Earth, the terms on the left side of the energy equation (the deltaEsys side) are: deltaEwoman, -Fh, and (1/2)mv2.

An equation is a mathematical statement that expresses the equality of two expressions. It consists of two expressions separated by an equal sign (=). Equations are used to solve a wide range of mathematical problems, from basic arithmetic to complex calculus. Equations can be written using numbers, variables, and various mathematical operations such as addition, subtraction, multiplication, division, and exponentiation.

On the right side of the equation (the Wext side), there are no terms as the energy input is 0.

II. System: barbell only For the system consisting of the barbell only, the terms on the left side of the energy equation (the deltaEsys side) are (1/2)mv2 and -Fh. On the right side of the equation (the Wext side), there are no terms as the energy input is 0.

III. System: barbell + Earth For the system consisting of the barbell and the Earth, the terms on the left side of the energy equation (the Esys side) are (1/2)mv2 and -Fh. On the right side of the equation (the Wext side), there are no terms as the energy input is 0.

To learn more about equation

https://brainly.com/question/25699025

#SPJ1

The bar's angular velocity when theta = 0 is 2.68 rad/s.

To solve this, follow these steps:

1. Determine the potential energy (PE) of the system when theta = 60 degrees.
2. Apply conservation of mechanical energy, equating the initial PE to the final kinetic energy (KE) when theta = 0.
3. Find the bar's angular velocity using the conservation of energy principle and moment of inertia.

The initial potential energy is due to the height of the 2-kg slider and the center of mass of the 4-kg bar. Use trigonometry to find the heights and calculate the PE.

At theta = 0, the system has both rotational KE from the disk and translational KE from the slider and bar. Calculate the moment of inertia for the disk and use it along with the conservation of energy equation to solve for the angular velocity.

To know more about potential energy click on below link:

https://brainly.com/question/24284560#

#SPJ11

The speed ratio va/vb would be 4. Thus, the answer is option a.

The kinetic energy of a moving object is directly proportional to its mass and the square of its speed

In this scenario, ball a has half the mass of ball b but eight times its kinetic energy.

This means that the speed of ball a is greater than that of ball b. To find the speed ratio, we can use the formula for kinetic energy:

KE = (1/2)mv^2.

If we assume the velocity of ball b to be v, then the velocity of ball a would be sqrt((8/0.5)v^2) = 4v.

Learn more about kinetic energy at

https://brainly.com/question/26472013

#SPJ11

the volume of the body is approximately 0.1199 cubic meters.

To find the volume of the body, we can use Archimedes' principle, which states that the weight of a fluid displaced by an object is equal to the buoyant force acting on the object.

In this case, the buoyant force acting on the body in water is equal to the weight of the water displaced by the body. Since the body weighs 5 N in water, it displaces 5 N of water.

The weight of the body in the air is 6 N, which is greater than the weight of the water displaced by the body. This means that the body sinks in water and has a density greater than that of water.

We can use the formula for density, which is density = mass/volume, to find the volume of the body. We know that the mass of the body is equal to its weight divided by the acceleration due to gravity, which is approximately 9.81 m/[tex]S^{2}[/tex]. Therefore:

mass = 6 N / 9.81 [tex]m/s^{2}[/tex]= 0.611 kg

Since the density of water is 1000 [tex]kg/m^{3}[/tex], we can set up the following equation to solve for the volume of the body:

density of body * volume of body = mass of body

density of body * V = 0.611 kg

the density of body = 0.611 kg / V

The density of the body must be greater than 1000 [tex]kg/m^{3}[/tex], the density of water. We can assume that the density of the body is constant and solve for the volume:

density of body = 5 N / (V * 9.81 m/[tex]S^{2}[/tex])

Setting these two equations equal to each other, we get:

0.611 kg / V = 5 N / (V * 9.81m/[tex]S^{2}[/tex])

Solving for V, we get:

V = 0.611 kg / (5 N / 9.81 m/[tex]S^{2}[/tex])

V = 0.1199 m^3

Therefore, the volume of the body is approximately 0.1199 cubic meters.

Learn more about Archimedes' principle:

https://brainly.com/question/787619

Answer:

No, because the graph with the steepest slope experiences the greatest rate of change in velocity. That object has the greatest acceleration.

What does constant acceleration look like on an acceleration graph?

Constant acceleration means a horizontal line for the acceleration graph. The acceleration is the slope of the velocity graph. Constant acceleration = constant slope = straight line for the velocity graph. The area under the acceleration graph is the change in velocity.

Hope this helps :)

Pls brainliest...

The object needs to be placed 14.5 cm in front of the mirror to form a virtual image with a height of 10.6 cm.

[tex]1/f = 1/d_o + 1/d_i[/tex]

m =[tex]-h_i/h_o[/tex] = -10.6/3.5 = -3.03

m = [tex]-d_i/d_o[/tex]

-3.03 = -d[tex]_i/10.5[/tex]

[tex]d_i =[/tex] 31.8 cm

[tex]1/f = 1/10.5 + 1/31.8[/tex]

f = -33.8 cm

[tex]1/f = 2/R[/tex]

So we can solve for R:

[tex]1/-33.8 = 2/R[/tex]

R = -67.6 cm

The radius of curvature of the mirror is -67.6 cm.

[tex]m = h_i/h_o = 10.6/h_o[/tex]

[tex]10.6/h_o = 10.6/3.5[/tex]

[tex]h_o = 3.5 cm[/tex]

Now we can use the mirror equation again to find the image distance:

[tex]1/f = 1/d_o + 1/d_i[/tex]

Since the image is virtual, d_i is negative:

[tex]1/-33.8 = 1/10.5 + 1/d_i[/tex]

[tex]d_i = -14.5 cm[/tex]

A mirror is a surface that reflects light, sound, or other waves. Mirrors can be made of various materials such as glass, metal, or plastic, and can have different shapes and curvatures to achieve specific optical properties. When light waves hit a mirror, they bounce off at an angle that is equal to the angle of incidence, according to the law of reflection.

This allows us to see our reflection in a mirror, as well as to use mirrors in various applications such as telescopes, microscopes, and lasers. Mirrors can also be used to create optical illusions, such as in a funhouse mirror or in a kaleidoscope. In addition, mirrors play a crucial role in certain scientific experiments, such as those involving lasers or in the study of light and optics.

To learn more about Mirror visit here:

brainly.com/question/3795433

#SPJ4

Answer:

c

Explanation:

The time it takes for the sound to travel from the hiker to the cliff and back is equal to twice the time it takes the sound to travel from the hiker to the cliff:

t(total) = 2 * t(one way)

We know that the total time is 4.00 s, so:

4.00 s = 2 * t(one way)

t(one way) = 2.00 s

Using the formula for the speed of sound:

speed = distance / time

we can calculate the speed of sound in air as follows:

speed = distance / time(one way) = 685 m / 2.00 s = 342.5 m/s (to three significant figures)

Therefore, the speed of sound in this air is approximately 342.5 m/s. The correct answer is (c).

When a circuit is made, electricity is able to flow from the power source, through the circuit, and back to the power source. This creates a complete loop, and electricity is able to be used.

When the circuit is disconnected, the loop is broken and electricity cannot flow. This is because there is no path to complete the circuit. No electricity is able to flow, and the device connected to the circuit will not work.

In some cases, the lack of a complete circuit can cause a short circuit and potentially damage the device. In order to make sure a circuit is complete, all of the wiring must be connected properly and securely. If a wire is loose or broken, the circuit will not be complete and the device will not work.

Know more about circuit here

https://brainly.com/question/27206933#

#SPJ11

At the cutoff frequency of either a high-pass or a low-pass RC filter, the output power is equal to half the input power.

An RC filter is a type of electronic filter that is commonly used to pass or block certain frequencies of electrical signals. It is made up of a resistor (R) and a capacitor (C) that are connected in series or in parallel to create a filter circuit. The RC filter is a simple and cost-effective way to filter high or low-frequency signals in electronic circuits.

At the cutoff frequency of a high-pass or low-pass RC filter, the output voltage is reduced to 0.707 times the input voltage. Since power is proportional to the square of the voltage, the output power is reduced to (0.707)^2 = 0.5 times the input power at the cutoff frequency. This means that half of the power from the input signal is allowed to pass through the filter at the cutoff frequency, and the other half is attenuated.

Learn more about the RC filters:

https://brainly.com/question/29490209

#SPJ11

Hence, 150x would be the greatest achievable particle magnification for this telescope.

It is the product of the focal length of the telescope and the focal length of the eyepiece. The highest usable magnification of a telescope is 50 times its aperture in inches as a general rule (or twice its aperture in millimeters).

The maximum practical magnification of a telescope is determined by several factors,

Using this rule, the maximum practical magnification for a 3-inch telescope with a focal length of 1000 mm would be approximately:

50 x 3 =

150x

To know more about particle magnification

https://brainly.com/question/28957672

#SPJ1

If the plate area of a fully charged parallel plate capacitor is decreased, the electric field between the plates will increase.

This is because the electric field is directly proportional to the charge on the plates and inversely proportional to the distance between the plates.

As the plate area decreases, the distance between the plates also decreases, which increases the electric field. However, if the capacitor has a dielectric material inside, the electric field will decrease due to the increased capacitance of the capacitor. Therefore, the correct answer is that the electric field will increase, unless there is a dielectric material inside the capacitor, in which case it will decrease.
A parallel plate capacitor is fully charged by a 9 Volt battery before being disconnected. When the plate area is decreased, the capacitance of the capacitor decreases. However, the charge stored in the capacitor remains constant since it is disconnected from the battery.

Therefore, the electric field between the plates of the capacitor increases as the voltage across the capacitor increases due to the decreased capacitance.

The presence of a dielectric will not change this outcome.

Learn more about capacitor here:

https://brainly.com/question/17176550

#SPJ11

Both central carbon atoms in C2H2 exhibit sp hybridization.

The hybridization of both central carbon atoms in C2H2, also known as ethyne or acetylene, is sp. In this molecule, each carbon atom is bonded to one hydrogen atom and the other carbon atom. Here's a step-by-step explanation:

1. Draw the Lewis structure of C2H2.
2. Identify the number of electron domains around each central carbon atom (bonds and lone pairs).
3. For each carbon atom, there is a triple bond with the other carbon atom and a single bond with a hydrogen atom, totaling 2 electron domains.
4. Based on the number of electron domains, the hybridization can be determined: 2 electron domains correspond to sp hybridization.

Learn more about Ethyne here: brainly.com/question/4225077

#SPJ11

The following assertion is untrue: "The shorter the period of rotation tends to be, the farther the planet is from the Sun."

The inner planets are rocky, whereas the outer planets are gaseous, which can be attributed to the early solar system's temperature. The solar system's temperature increased as the gases came together to create a protosun. Temperatures in the inner solar system reached 2000 K, whilst, in the outer solar system, it was only 50 K.

Because of their compact, rocky surfaces akin to Earth's terra firma, the planets Mercury, Venus, Earth, and Mars are referred to as terrestrial. The four planets closest to the sun are the terrestrial planets.

to know more about solar systems here:

brainly.com/question/12075871

#SPJ1