The description for a star cluster is a system of stars held together by gravity that can number from a thousand up to a million stars. The correct option is b.
What is a star cluster?Due to their location on the dusty spiral arms on the plane of spiral galaxies, they are occasionally referred to as galactic clusters. All of the stars in an open cluster originated from the same initial massive molecular cloud.
The most basic theory states that star cluster when a massive cloud of gas and dust condenses. Once the cloud's center has attracted enough material from its surroundings, star formation can begin.
Therefore, the correct option is b, a system of stars held together by gravity that can number from a thousand up to a million stars.
To learn more about star clusters, refer to the link:
https://brainly.com/question/15222665
#SPJ1
Determine the maximum tensile and compressive bending stress in the beam if it is subjected to a moment of M=4 kip. ft
Maximum tensile to y bar is 3.40 in and I Na is 91.73 in4 whereas bending stress is 1.78 ksi.
When an object is subjected to an external load at any cross-section, it typically experiences bending stress. The relationship between the section's section modulus and bending moment is another definition for the bending stress. The equation calculates the bending stress for the rail. Tensile strength is the maximum load or stress that a material can withstand before stretching and breaking. Tensile stress and strain are the two components of tensile force, which is the stretching force acting on the material. This indicates that the force is seeking to stretch the material that is subject to it since it is under tension.
To learn more about Bending Stress click here
brainly.com/question/24227487
#SPJ4
When you create a calculated column, you can use _____ references to create the formula.
A.) structured
B.) indexed
C.) key
D.) logical
Answer:
structured
Explanation:
investigate and report on the purpose, relative advantages, and relative disadvantages of two network management software tools. comment on another person's post.
The two network management tools are Datadog and Zabbix.
What are advantages of Datadog and Zabbix?Datadog
The application topology and interdependencies are well visualized, and Datadog assists in automatically monitoring and analyzing network traffic between the application's component parts. It is simple to access the metrics' past. It is easy to manage the downtime for different resources.
Zabbix
Zabbix can keep an eye on servers, networks, databases, and websites. The zabbix interface is absolutely fantastic. The team can monitor only the things that are important to them using the customized dashboards. aids in the production of reports on the network assets' performance. Monitoring connection availability is beneficial.
What are disadvantages of Datadog and Zabbix?
Datadog
A faster method of removing the resources from datadog would be preferable. Training is more expensive. There is a lack of documentation in some setup-related areas. Customization is valued over simplicity.
Zabbix
Reports that are already created can also be updated. Being open source does not imply that something is free. Overall, the UI is functional, not necessarily attractive. Increase the number of triggers that can be configured The user interface is now slightly more tidy. The process is a little bit lighter as a result.
Learn more about network monitoring tools
https://brainly.com/question/14293290
#SPJ4
The tailstock
a. is used to mount the lathe center
b. cannot be used for taper turning
C. is removed when long work must be turned
D. holds the inner end of the work being turned
describe the difference between lossy and lossless compression techniques and give an example of when each is most appropriate.
The difference between lossy and lossless compression techniques are:
Lossy compression is a method that reduces the size of a file by removing some of the data contained in it. This is done by identifying and removing redundant or unnecessary data, such as data that the human eye cannot perceive. Lossy compression is typically used for media files, such as images, audio, and video, and is often used in applications where the loss of some data is acceptable in exchange for a smaller file size. Examples of lossy compression include JPEG for images and MP3 for audio.Lossless compression, on the other hand, is a method that reduces the size of a file without removing any data. This is done by identifying and eliminating redundancy in the data, such as repeating patterns or sequences, and replacing them with a smaller representation. Lossless compression is typically used for files that cannot tolerate any loss of data, such as documents and other text-based files. Examples of lossless compression include ZIP and GZIP.Lossy and lossless are two types of data compression techniques that are used to reduce the size of a file or data stream. In general, lossy compression is most appropriate when the file size needs to be reduced as much as possible, even if it means sacrificing some data quality, while lossless compression is most appropriate when the file needs to be reduced in size without losing any data.
Learn more about lossy and losses, here https://brainly.com/question/13663721
#SPJ4
adjust your program from exercise 2 so that only lower case letters are allowed for valid passwords.
To adjust your program from exercise 2 so that only lower case letters are allowed for valid passwords, check the code given below.
What is program?A programme is a set of instructions that a computer uses to carry out a particular task. A programme is like the instructions for a computer, to use an analogy. It includes a list of components (called variables, which can stand for text, images, or numeric data) and a list of instructions (called statements), which instruct the computer how to carry out a particular task.
Specific programming languages like C++, Python, and Ruby are used to create programmes. These high level programming languages are writable and human-readable. Compilers, interpreters, and assemblers inside the computer system then translate these languages into low level machine languages.
//CODE//
/*Exercise 2: Adjust your program from Exercise 1 so that only
lower case letters are allowed for valid passwords.*/
#include <iostream>
#include <string>
#include <cctype>
#include <cstring>
using namespace std;
//function prototypes
bool testPassWord(char[]);
int countLetters(char*);
int countDigits(char*);
bool islowerCase(char *strPtr);
int main()
{
char passWord[20];
cout << "Enter a password consisting of exactly 4 letters in lower case letters and 6 digits:";
cin.getline(passWord,20);
if (testPassWord(passWord))
cout << "Please wait - your password is being verified" << endl;
else
{
cout << "Please enter a password with exactly 4 letters in lower case letters and 6 digits" << endl;
cout << "For example, my1237Ru99 is valid" << endl;
}
// Fill in the code that will call countLetters and countDigits and will
//print to the screen both the number of
// letters and digits contained in the password.
cout << "There are " << countLetters(passWord) << " letters in the password.\n";
cout << "There are " << countDigits(passWord) << " digits in the password.\n";
if(countLetters(passWord)==4 && countDigits(passWord)==6)
{
cout<<"password: "<<passWord<<" is valid"<<endl;
}
else
cout<<"So, password: "<<passWord<<" is INVALID"<<endl;
//Pause the system for a while
system("PAUSE");
return 0;
}
//**************************************************************
// testPassWord
//
// task: determines if the word in the character array passed to it, contains //exactly 5 letters and 3 digits.
// data in: a word contained in a character array
// data returned: true if the word contains 5 letters & 3
// digits, false otherwise
//
//**************************************************************
bool testPassWord(char custPass[])
{
int numLetters, numDigits, length;
length = strlen(custPass);
if(!islowerCase(custPass))
{
cout<<"Lower case letters are only allowed for valid password.";
}
numLetters = countLetters(custPass);
numDigits = countDigits(custPass);
//Check valid password consists of 10 characters,6 of which must be digits
//and the other 4 letters
if (numLetters == 4 && numDigits == 6 && length == 10 )
return true;
else
return false;
}
//**************************************************************
// countLetters
//
// task: counts the number of letters (both
// capital and lower case)in the string
// data in: a string
// data returned: the number of letters in the string
//
//**************************************************************
int countLetters(char *strPtr)
{
int occurs = 0;
while(*strPtr != '\0')
{
if (isalpha(*strPtr))
occurs++;
strPtr++;
}
return occurs;
}
bool islowerCase(char *strPtr)
{
int occurs = 0;
while(*strPtr != '\0')
{
if (islower(*strPtr))
occurs++;
strPtr++;
}
if(occurs==4)
return true;
else
return false;
}
//**************************************************************
// countDigits
//
// task: counts the number of digits in the string
// data in: a string
// data returned: the number of digits in the string
//
//**************************************************************
int countDigits(char *strPtr)
{
int occurs = 0;
while(*strPtr != '\0')
{
if (isdigit(*strPtr)) // isdigit determines if the character is a digit
occurs++;
strPtr++;
}
return occurs;
}
Learn more about program
https://brainly.com/question/26497128
#SPJ4
A solid shaft of 120 mm diameter is required to transmit 200 kW at 100r.p.m.
If the angle of twist is not to exceed 2°, find the length of the shaft. Take
modulus of rigidity for the shaft material as 90 GPa.
The required length of a shaft is approximately 2.96 meters.
To find the length of the shaft, you need to use the torsion formula, which is:
T = (Torque)/(pJ)
Where:
T is the angle of twist in radians
Torque is the applied torque
p is the radius of the shaft
J is the torsional stiffness of the shaft
To find the length of the shaft, you will need to rearrange the torsion formula to solve for L, the length of the shaft. The resulting equation will be:
L = (TpJ)/(Torque)
Plugging in the known values, we get:
L = (2° × 120 mm × 90 GPa) / (200 kW)
Converting the angle of twist to radians and the power to torque gives:
L = (0.0349 × 120 mm × 90 GPa) / (2777 Nm)
Solving this equation gives a shaft length of approximately 2.96 meters.
This is the minimum length of the shaft required to transmit the specified torque without exceeding the specified angle of twist.
To learn more about the torsion click here:
https://brainly.com/question/27375807
#SPJ1
Bryden is a network analyst who has been recruited into Big Bay Burger's security management. Which of the following terminologies must he use to explain to the company's employees about the possibility of someone using a deception in following them into a restricted area?
1. Phishing
2. Baiting
3. Piggybacking
4. tailgating
The correct term to use in this situation is "tailgating." Tailgating refers to the act of someone following another person into a restricted area without proper authorization, often by piggybacking on the other person's access.
Tailgating, also known as "piggybacking," is a security breach that occurs when an unauthorized person follows an authorized person into a restricted area, such as a building or a secure computer network. This can be done physically, by following someone through a door or gate, or digitally, by using someone else's login credentials to access a restricted system. This can be a security vulnerability, as it allows unauthorized individuals to enter secure areas without being detected. It is important for employees to be aware of this potential security risk and to take steps to prevent it, such as using proper authentication procedures and paying attention to their surroundings.
Learn more about tailgating, here https://brainly.com/question/2000011
#SPJ4
A four-pole induction motor drives a load at 2549 rpm. This is to be accomplished by using an electronic converter to convert a 400-V dc source into a set of three-phase ac voltages. Part A Find the frequency required for the ac voltages assuming that the slip is 4 percent. Part B If the dc-to-ac converter has a power efficiency of 93 percent and the motor has a power efficiency of 80 percent, estimate the current taken from the dc source.
The frequency of the ac voltages required is 41.95 Hz, The current taken from the dc source is P / 316.4. Since the power is not known, the current cannot be calculated.
What is Ac voltage?
Ac voltage, also known as alternating current voltage, is a type of electrical current that periodically reverses direction. It is the most common type of electrical current used in homes and businesses. Ac voltage is generated by an electrical generator and is supplied to homes and businesses through the power grid. The frequency of ac voltage is typically 60 Hz, or 60 cycles per second. Ac voltage is different from dc voltage, which is a type of electrical current that flows in a single direction. Ac voltage is used in a wide range of electrical applications, including powering motors and light bulbs. Ac voltage is also used in telecommunications, as it is more efficient than dc voltage for transmitting signals over long distances.
Part A
The frequency of the ac voltages required to drive the load at 2549rpm can be calculated using the following equation:
F = (n / 60) * (1 - s)
Where:
F = frequency (Hz)
n = speed (rpm)
s = slip (percent)
Therefore, the frequency of the ac voltages required is:
F = (2549 / 60) * (1 - 0.04)
F = 41.95 Hz
Part B
The current taken from the dc source can be estimated using the following equation:
I = P / (V * ηdc/ac * ηmotor)
Where:
I = current (A)
P = power (W)
V = voltage (V)
ηdc/ac = efficiency of DC-AC converter (percent)
ηmotor = efficiency of motor (percent)
Therefore, the current taken from the dc source is:
I = P / (400 * 0.93 * 0.8)
I = P / 316.4
Since the power is not known, the current cannot be calculated.
To learn more about Ac voltage
https://brainly.com/question/25966372
#SPJ1
A consultation with a world-famous surgeon is an example of a(n) _____ service.
a. specialty
b. unsought
c. convenience
d. shopping
e. dynamic
a capacitor uses an _____ field to store potential electric energy which can be used as a power source when connected to a network. fill in the blank.
A capacitor uses an electric field to store potential electric energy which can be used as a power source when connected to a network.
What is a capacitor and how it works?
Unlike the battery, a capacitor is a circuit component that temporarily stores electrical energy by distributing charged particles on (generally two) plates to create a potential difference. A capacitor can take a shorter time than a battery to charge up and it can release all the energy very quickly.
What is the main function of a capacitor?
The primary use of a capacitor is to store electrostatic energy in an electric field and hence supply this energy whenever possible to the circuit.
How does a capacitor store energy?
A charged capacitor stores energy in the electrical field between its plates. As the capacitor is being charged, the electrical field builds up. When a charged capacitor is disconnected from a battery, its energy remains in the field in the space between its plates.
Thus, the electric field is the correct answer.
To know more about a capacitor:
https://brainly.com/question/21851402
#SPJ4
1. Dr. Gulakowicz is an orthodontist. She estimates that adding two new chairs will increase fixed costs by $150,000, including the annual equivalent cost of the capital investment and the salary of one more technician. Each new patient is expected to bring in $3,000 per year in additional revenue, with variable costs estimated at $1,000 per patient. The two new chairs will allow Dr. Gulakowicz to expand her practice by as many as 200 patients annually. How many patients would have to be added for the new process to break even?
The break-even point would be 50 patients. This is calculated by taking the fixed costs of $150,000 and dividing it by the difference between the revenue per patient ($3,000) and the variable costs per patient ($1,000), which is $2,000. 150,000/2,000 = 75. Therefore, 75 patients would need to be added for the new process to break even.
A project ha following time chedule: Activity Time in Week Activity Time in Week 1-2 4 5-7 8 1-3 1 6-8 1 2-4 1 7-8 2 3-4 1 8-9 1 3-5 6 8-10 8 4-9 5 9-10 7 5-6 4 Contruct the network and compute: (1) TE and TL for each event (2) Float for each activity (3) Critical path and it duration
(1) TE and TL for each event
Event 1: TE=0, TL=0
Event 2: TE=4, TL=4
Event 3: TE=1, TL=5
Event 4: TE=2, TL=6
Event 5: TE=6, TL=12
Event 6: TE=1, TL=2
Event 7: TE=8, TL=16
Event 8: TE=9, TL=17
Event 9: TE=8, TL=18
Event 10: TE=16, TL=23
(2) Float for each activity
Activity 1-2: Float=0
Activity 1-3: Float=3
Activity 2-4: Float=2
Activity 3-4: Float=1
Activity 3-5: Float=0
Activity 4-9: Float=0
Activity 5-6: Float=0
Activity 5-7: Float=0
Activity 6-8: Float=7
Activity 7-8: Float=6
Activity 8-9: Float=5
Activity 8-10: Float=0
Activity 9-10: Float=0
(3) The critical path for this project is: 3-4, 4-9, 5-7, 7-8, 8-10, 9-10, with a total duration of 23 weeks.
THE SOLUTIONTo construct the network and compute the requested information, we first need to create a list of events and activities.From the given schedule, we can identify the following events and activities:Events:1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Activities:1-2: 4 weeks
1-3: 1 week
2-4: 1 week
3-4: 1 week
3-5: 6 weeks
4-9: 5 weeks
5-6: 4 weeks
5-7: 8 weeks
6-8: 1 week
7-8: 2 weeks
8-9: 1 week
8-10: 8 weeks
9-10: 7 weeks
Now we can compute the TE (time when an event is expected to start) and TL (time when an event is expected to be completed) for each event, as well as the float (amount of time that an activity can be delayed without delaying the project completion) for each activity.TE and TL for each event:Event 1: TE=0, TL=0
Event 2: TE=4, TL=4
Event 3: TE=1, TL=5
Event 4: TE=2, TL=6
Event 5: TE=6, TL=12
Event 6: TE=1, TL=2
Event 7: TE=8, TL=16
Event 8: TE=9, TL=17
Event 9: TE=8, TL=18
Event 10: TE=16, TL=23
Float for each activity:Activity 1-2: Float=0
Activity 1-3: Float=3
Activity 2-4: Float=2
Activity 3-4: Float=1
Activity 3-5: Float=0
Activity 4-9: Float=0
Activity 5-6: Float=0
Activity 5-7: Float=0
Activity 6-8: Float=7
Activity 7-8: Float=6
Activity 8-9: Float=5
Activity 8-10: Float=0
Activity 9-10: Float=0
The critical path is the sequence of activities that have zero float, meaning they cannot be delayed without delaying the project completion. The critical path for this project is: 3-4, 4-9, 5-7, 7-8, 8-10, 9-10, with a total duration of 23 weeks.Learn more about Construct Network here:
https://brainly.com/question/29355713
#SPJ4
All of the following are true of spreadsheets EXCEPT O A cell content that is displayed is the result of a formula entered in that cell. O Line graphs, bar graphs, stacked bar graphs, and pie charts are typical graphs created from spreadsheets. O A cell reference is made by a numbered column and lettered row reference, O A cell may contain label, value, formula, or function.
The statement about spreadsheets that incorrect is a cell reference is made by a numbered column and lettered row reference.
What is cell reference?Cell reference or cell address is a address to specific cell in spreadsheets. Cell reference is made by combining two axis reference which is called column and row.
Column reference in spreadsheets are by letter such as A, B, C, etc. Then, row reference in spreadsheets are by number such as 1, 2, 3, etc.
Thus, the cell reference is made by lettered column and numbered row. So, the option of a cell reference is made by a numbered column and lettered row reference is false or incorrect.
Learn more about cell reference here:
brainly.com/question/14309859
#SPJ4
The branch-circuit load for a counter-mounted cooking unit supplied from a single branch circuit shall be calculated by adding ____ of the nameplate rating.
A 50%
B 80%
C 100 %
D 125 %
The branch-circuit load for a counter-mounted cooking unit supplied from a single branch circuit shall be calculated by adding 80% of the nameplate rating.
The National Electrical Code (NEC) specifies that the branch-circuit load for a counter-mounted cooking unit (such as a stove, oven, or cooktop) supplied from a single branch circuit should be calculated by adding 80% of the nameplate rating. This is to account for the potential for high levels of electrical demand when the cooking unit is in use. It is important to ensure that the branch circuit is adequately sized to handle the expected electrical load in order to prevent overloading and potential hazards such as fires or electrical shock.
Learn more about NEC, here https://brainly.com/question/10165093
#SPJ4
Load Balancers are appropriate for which purposes? Select all that apply. 0 Off-loading overhead of protocols like TLS O Implementing Application Logic code that is hard to implement on Backends Providing High Availability istributing Clients amongst Backends
The purpose of load balancers is off-loading overhead of protocols like TLS.
Load balancers can be used to offload the overhead of encrypting and decrypting traffic using protocols like Transport Layer Security (TLS). This can be useful for improving the performance of a system by allowing the backend servers to focus on serving requests rather than handling the overhead of encryption and decryption. When a client establishes a secure connection to a load balancer, the load balancer establishes a separate secure connection to the backend servers using a different set of keys. This allows the load balancer to handle the overhead of encryption and decryption, while the backend servers can focus on processing the request and generating a response.
Learn more about load balancers, here https://brainly.com/question/27961988
#SPJ4
Users regularly log on with a username and password. However, management wants to add a second authentication factor for any users who launch the gcga application. The method needs to be user-friendly and non-disruptive. Which of the following will BEST meet these requirements?An authentication applicationTPMHSMPush notifications
Push notifications would likely be the best option for adding a second authentication factor that is user-friendly and non-disruptive.
An authentication application, such as a token generator or authenticator app, could also be a good choice, as it would allow users to easily complete the second authentication step without having to remember additional passwords or codes.
TPM (Trusted Platform Module) and HSMs (Hardware Security Modules) are hardware-based security measures that can provide additional protection for sensitive data, but they may not be as user-friendly or non-disruptive as the other options.
It's worth considering the specific needs and requirements of your organization and the users in deciding which option to choose.
Learn more about authentication, here https://brainly.com/question/29752591
#SPJ4
R = 4MN and C= 0.75μF.
v(0)
v¡(t) = −t²V for 0s ≤ t ≤ 5s. What is the value of v
at time t = 5s, if v (0)
5s, if = 0? You can assume the
operational amplifier behaves as an ideal op amp with
power supplies of +15V and −15V. Give your answer
in volts, and omit the units from your answer.
Answer:
45.9m
Explanation:
Given parameters:
Final velocity = 30m/s
Initial velocity = 0m/s
Unknown:
Height of fall = ?
Solution:
The motion equation to solve this problem is given below;
V² = U² + 2gH
V² = 0 + (2 x 9.8 x H)
How did NAT help resolve the shortage of IPV4 addresses after the increase in SOHO, Small Office Home Office, sites requiring connections to the Internet? Choose the best answer below:
A.It provides a migration path to IPV6.
B.It permits routing the private IPV4 subnet 10.0.0.0 over the Internet.
C.NAT adds one more bit to the IP address, thus providing more IP addresses to use on the Internet.
D.It allowed SOHO sites to appear as a single IP address, (and single device), to the Internet even though there may be many devices that use IP addresses on the LAN at the SOHO site.
Even though there may be numerous devices using IP addresses on the LAN at the SOHO site, it allowed SOHO sites to appear to the Internet as a single IP address (and single device).
After an increase in SOHO, Small Office Home Office, sites needing internet connections, NAT assisted in resolving the IPV$ address shortage.
A router can convert a public IP address to a private IP address and vice versa thanks to network address translation (NAT). The private IP addresses are kept secret (private) from the outside world thanks to the additional protection it gives the network. By doing this, NAT enables routers (single devices) to serve as intermediaries between local (private) networks and the Internet (public networks). A single distinct IP address is needed with this arrangement to identify a complete group of computers to anyone outside their networks.
Know more about IP address here:
https://brainly.com/question/16011753
#SPJ4
Management information systems (MIS) for communication directly support organizational decision making by helping managers communicate, obtain, discuss, and understand the information necessary for strategic decisions. ensuring that managers' decisions and goals are communicated and understood by everyone within the organization. allowing all stakeholders to communicate their opinions and insights and participate in making strategic decisions. creating a record of the organization's past decisions and their outcomes, which managers can easily refer back to
Management information systems (MIS) directly assist corporate decision making -by helping managers communicate, obtain, discuss, and understand the information necessary for strategic decisions.
How do management information systems (MIS) function?
A collection of systems and processes known as a management information system (MIS) collect data from many sources, compile it, and present it in an usable fashion.
Managers create reports using a MIS to offer them a complete overview of all the data they need to make choices about everything from daily operations to top-level strategy.
Although the notion is older than contemporary computing technologies, today's management information systems heavily rely on technology to gather and show data.
Information Systems Types:
a. Transaction Processing Systems (TPS):
b. Management Information Systems (MIS)
c. Decision Support Systems (DSS)
To know more about management information systems, visit: https://brainly.com/question/12977871
#SPJ4
: Delivery Execution Knowledge Check Question 1 of 8. When you walk into the station at the end of your route, what should you do?
O Check in with your DSP and being any undeliverable packages back to the Amazon Retum to Station desk
O leave the undeliverable packages with your OSP then go off duty
O You don't have to return to the station at the end of your day
O Sign out of your device and love
Mark for foto up
Question 2 of 8. How do you make sure that you are at the correct address?
O Compare the address on the package label with the address listed in your delivery app
O Compare the address in your delivery app with the physical home address
O Compare the address isted on the package label with the address listed in
O Delivery App, and the physical address listed on the home The delivery app will tell you the correct address
Mark forfollow up
Question 3 of 8 In the Delivery App, where can you find the button to contact the customer?
O In the Map screen
O In the Help menu
O in the linerary
O In the Main Menu
When you walk into the station at the end of your route, you should option A: check in with your DSP and bring any undeliverable packages back to the Amazon Return to Station desk.
2. To make sure you are at the correct address, you should option A: compare the address on the package label with the physical home address. You can also compare the address listed in your delivery app with the physical address.
3. In the Delivery App, you can find the button to contact the customer in option A: the Map screen or in the itinerary. It may be labeled "Contact Customer" or something similar.
When you finish your delivery route and return to the station, it is important to check in with your DSP (Delivery Service Provider) and return any undeliverable packages to the Amazon Return to Station desk. This helps to ensure that the packages are properly processed and that the delivery information is accurately recorded.
Therefore, To make sure you are at the correct address, you should compare the address on the package label with the physical home address.
Learn more about Delivery from
https://brainly.com/question/21840716
#SPJ1
Which of the following are true regarding using multiple vlans on a single switch?
a. The number of collision domains remains the same.
b. The number of broadcast domains increases.
There are more broadcast domains available. There are still the same amount of collision domains.
Although a switch can support many VLANs, none of them can speak to one another directly. If they could, the goal of a VLAN, which is to isolate a portion of the network, would be defeated. A router is necessary for VLAN communication. Numerous VLANs can be present on a single switch, and VLANs can span multiple switches. Trunking, a method that enables information from many VLANs to be transferred over a single connection between switches, is required in order for numerous VLANs on various switches to be able to communicate with one another.
Learn more about domains here:-
https://brainly.com/question/28135761
#SPJ4
A dormitory at a large university, built 50 years ago, has exterior walls constructed of L5 = 25-mm-thick sheathing with a thermal conductivity of k3 = 0. 1 W/m. K. To reduce heat losses in the winter, the university decides to encapsulate the entire dormitory by applying an Li = 25-mm-thick layer of extruded insulation characterized by ki = 0. 029 W/m K to the exterior of the original sheathing. The extruded insulation is, in turn, covered with an Lg = 5-mm-thick architectural glass with kg = 1. 4 W/m. K. Determine the heat flux through the original and retrofitted walls when the interior and exterior air temperatures are Tinfity, i = 22 degree C and Tinfity, 0 = -20 degree C, respectively. The inner and outer convection heat transfer coefficients are hi = 5 W/m2 K and h0 = 25 W/m2 K. respectively.
The heat flow through the original wall is 627.7 W/m² and the heat flux through the retrofitted wall is 174.3 W/m². So the retrofitted wall has a significantly lower heat flux than the original wall, indicating that it is much more effective at preventing heat loss.
Heat energy is a form of energy that is associated with the motion of particles in a substance, such as the vibrations of atoms and molecules. It is a form of thermal energy that is transferred between objects that are at different temperatures.
To determine the heat flux through the original and retrofitted walls, we can use the equation for heat flux through a multi-layer composite wall, which is:
Q = [tex](T_i - T_o) / (\frac{1}{h_i} + \frac{L_i}{k_i} + \frac{Lg}{k_g} + \frac{Lo}{k_o} + \frac{1}{h_o} )[/tex]
Where:
T = the interior and exterior air temperatures, respectively
[tex]L_i, k_i, L_g, k_g, L_o,[/tex] and [tex]k_o[/tex] are the thickness, thermal conductivity, and convection heat transfer coefficient of each layer of the wall
[tex]h_i[/tex] and [tex]h_o[/tex] are the inner and outer convection heat transfer coefficients, respectively
we are informed that:
Li = 0 (interior air layer)
ki = 0 (interior air layer)
L1 = 25 mm
k1 = 0.1 W/m.K
L2 = 25 mm
k2 = 0.029 W/m.K
L3 = 5 mm
k3 = 1.4 W/m.K
Lo = 0 (exterior air layer)
ko = 0 (exterior air layer)
So the heat flux through the original wall is:
Qoriginal = (22 - (-20)) / (1/5 + (25/0.1) + 1/25) = 627.7 W/m²
And the heat flux through the retrofitted wall is:
Qretrofitted = (22 - (-20)) / (1/5 + (25/0.1) + (25/0.029) + (5/1.4) + 1/25) = 174.3 W/m²
Learn more about heat energy here, https://brainly.com/question/8206631
#SPJ4
find the type of elements and their impedance in ohms within each electrical box. (assume that all elements of a load are in series.)
The type of element is Resistor and inductor in series. While the impedance will be 1.08 + 0.72.
What is Resistor?
A passive electrical component with two terminals that is used in electrical circuits to limit or regulate the flow of electric current.
The main function of a resistor is to reduce current flow and voltage in a specific section of a circuit. It is made of copper wires coiled around a ceramic rod, and the resistor's outer surface is coated with insulating paint.
Ohm is the SI unit of resistor.
The two basic types of resistors are as follows:
Linear resistorNon-linear resistorTo know more about Resistor, visit: https://brainly.com/question/29006457
#SPJ4
3. Suppose up to 300 cars per hour can travel between any two of the cities 1, 2, 3, and 4. Formulate a maximum flow problem that can be used to determine how many cars can be sent in the next two hours from city 1 to city 4. Give the network diagram and the LP formulation for your model.
Let $x ij$ represent the quantity of cars that will be delivered in the following two hours from city I to city j.
Create a maximum flow issue?Network Diagram:
LP Formulation:
Maximize Z = 150x14 + 150x24
Subject to:
x11 + x12 + x13 + x14 <= 300 (flow from city 1 to other cities)
x21 + x22 + x23 + x24 <= 300 (flow from city 2 to other cities)
x31 + x32 + x33 + x34 <= 300 (flow from city 3 to other cities)
x41 + x42 + x43 + x44 <= 300 (flow from city 4 to other cities)
x11 + x21 + x31 + x41 = 150 (flow into city 1)
x12 + x22 + x32 + x42 = 150 (flow into city 2)
x13 + x23 + x33 + x43 = 150 (flow into city 3)
x14 + x24 + x34 + x44 = 150 (flow into city 4)
xij >= 0 (all variables must be positive)
Where xij represents the number of cars traveling from city i to city j in two hours.To learn more about network diagram and the LP formulation refer to:
https://brainly.com/question/29672656
#SPJ4
Switching terminal screws on switches are always connected to the ___ conductor.
Switching terminal screws on switches are always connected to the ungrounded conductor.
What is an electrical circuit?An electrical circuit can be defined as an interconnection of different electrical components, in order to create a pathway for the flow of electric current (electrons) due to a driving voltage.
What is a switch?In Electrical engineering, a switch can be defined as an electrical component (device) that is typically designed and developed for interrupting the flow of current or electrons in an electrical circuit.
This ultimately implies that, a switch that can open or close an electric circuit should always be connected to the underground conductor, in order to avert any form of hazard and as a safety precaution.
Read more on switch here: https://brainly.com/question/16160629
#SPJ1
In the maturity model, when in cloud security planning do you reach minimum value security? Select an answer: O after using the integrated tools O after using the layered tools
O after understanding the basics
When you reach minimum value security in cloud security planning "after understanding the basics", you approach the maturity model.
What is the Capability Maturity Model?The Capability Maturity Model can be used to construct and enhance an organization's software development process (CMM). The model depicts a five-level evolutionary path of operations that get more orderly and systematic as they develop.
CMM was established and promoted by the Software Engineering Institute (SEI), a research and development center financed by the United States Department of Defense (DOD) and is now part of Carnegie Mellon University. SEI was founded in 1984 to address software engineering challenges and, more broadly, to develop software engineering methodologies.
If you reach minimum value security in cloud security planning after understanding the basics, you approach the maturity model.
Hence, the correct answer would be an option (C).
To learn more about the capability maturity model click here:
https://brainly.com/question/28999598
#SPJ4
TRUE/FALSE. it is important to know if a computer is byte or word addressable because we need to know how many addresses are contained in main memory, cache, and in each block when doing cache mapping
The statement " it is important to know if a computer is a byte or word addressable because we need to know how many addresses are contained in main memory, cache, and in each block when doing cache mapping" is True.
What is cache mapping?
Simply said, a cache is a block of memory used to store data that will probably be utilized again. Like web servers, the hard drive and CPU frequently employ a cache. The term "cache mapping" describes a method of bringing the information in the main memory into the cache. For cache memory mapping, three different forms of mapping are used: direct, associative, and set-associative mapping.
When we wish to accelerate and synchronize with a high-speed CPU, we use something called cache memory, which is a unique, extremely fast memory. The cache stores frequently requested data and instructions so that the CPU always has access to them when needed.
To learn more about cache mapping, use the link given
https://brainly.com/question/8237529
#SPJ4
TRUE/FALSE. a technician is using a network-attached desktop computer with a type 2 hypervisor to run two vms. one of the vms is infected with multiple worms and other forms of known malware. the second vm is a clean installation of windows. the technician has been tasked with logging the impact on the clean windows vm when the infected vm attempts to infiltrate the clean vm through the network.
This statement about networking is true.
What is network?A network is a system of interconnected components or entities that exchange data or information. It can refer to physical or virtual components, such as computers, wires, cables, and routers, or it can refer to the nodes and edges of a graph. Networking is the process of creating and maintaining connections between entities, which can be used to share resources and information. Networks can be used to connect computers to each other in a local area network (LAN) or to connect computers in different locations over the internet. Networks can also be used to connect people and organizations, or to provide services like email, video streaming, and telecommunication.
To know more about network click-
https://brainly.com/question/28041042
#SPJ4
The following problem has several moving parts. Although it's a multiple choice question, we recommend reading the code carefully and coming to an understanding of what it does. 1| def main(): 2| counter = Counter() 3| num = 0 4| for x in range(0, 100): 5| incrementor(counter, num) 6| return (counter.count, num) 7| 8| def incrementor(c, num): 9| c.count = c.count + 1 10| num = num + 1 11| 12| class Counter: 13| def __init__(self): 14| self.count = 0 15| 16| a_tuple = main() What is stored in a_tuple after the above code is run?(0, 100) (100, 0) (100, 100) (0,0) Nothing; an error occurs before the code can end on its own.
(100, 0) is stored in a_tuple after the above code is run.
What is code?The language that a computer can understand is generally referred to as code. Natural language cannot be understood by computers. As a result, the computer must translate human language into a set of "words" it can comprehend.
The words that, when used in a program, start a standard action are known as keywords. Syntax is the set of keywords that must be present for a computation to be successfully performed. A programming language is made up of a set of keywords and syntax.
The word "code" by itself is so vague that it doesn't convey much. Consideration of code as instructions as opposed to data can be helpful. This means that computer code takes data as an input, processes it, and then outputs the result.
Learn more about code
https://brainly.com/question/26134656
#SPJ4