Complete the following sentence by choosing the best answer:
Waves transfer ____.
a. particles
b. energy
с. light
d. matter

Answer:

carbon and hydrogen

Explanation:

the carbon atoms join together to form the frame work of the compound and the hydrogen atoms attach to them in many different configurations

In the gold unit cell, packing is more effective. The sodium chloride unit cell has a greater packing efficiency. In both lattice structures, packing is equally efficient.

Two unit cells share an atom on a face, therefore only one of these cells is the owner of the entire atom.

An example of cubic close packing is a crystalline structure in which planes of densely packed atoms or ions are arranged in a sequence of three alternating layers with various relative orientations.

To know more about efficiency visit:-

https://brainly.com/question/13828557

#SPJ4

The difference in the oxidation state of chromium in chromate and dichromate salts is 0 as chromium has an oxidation number of +6 in both salts.

Chromates and dichromates are salts of chromic acid and dichromic acid, respectively.

Chromate salts contain the chromate ion, CrO₄²-, and have an intense yellow color. Dichromate salts contain the dichromate ion, Cr₂O₇²−, and have an intense orange color.

The chromium atoms are in oxidation state +6 in both, and the chromate and dichromate ions are fairly strong oxidizing agents.

Chromium in the +6 (or VI) oxidation state is often referred to as hexavalent chromium.

Learn more about chromate and dichromate at: https://brainly.com/question/18763201

#SPJ1

Answer:

Explanation:

july

Answer:

Yes.

Explanation:

Yes.

Answer:10-1707

Explanation:

The conductivity of copper can be decreased when it takes in oxygen from the air and forms copper oxide on the surface or when oxygen impurities are present in the material. Copper oxide is a poor conductor of electricity compared to pure copper, and the presence of oxygen impurities can disrupt the regular arrangement of copper atoms and hinder the flow of electrons, leading to a decrease in conductivity.

Because a greater percentage of active sites will be occupied by substrate, competitive inhibition will be reduced.

When the competitive inhibitor attaches to the active site, the substrate is unable to bind there. Although it doesn't prevent substrate binding, the noncompetitive inhibitor attaches to a different spot on the enzyme and alters it in ways that prevent it from efficiently catalyzing the reaction.

When an inhibitor binds to an enzyme's target molecule, also known as the substrate, this process is known as inhibiting the activity of enzyme catalysis. In order to do this, the active site of the substrate's binding is blocked in some way.

To know more about competitive inhibition visit:

https://brainly.com/question/13554208

#SPJ4

Using simple and environmentally friendly synthesis approach, we can produce approximately 120 g of G-dots per 100 kg of food waste.

Because of the abundance of oxygen-containing functional groups on their surface, G-dots are highly soluble in water. Because of similar quantum effects and emission traps on the surfaces, the narrow band of photoluminescence emission (400-470 nm) confirms that the size of the G-dots (∼4 nm) is small. G-dots have excellent photostability; their photoluminescence intensity decreases slowly (∼8%) after 10 days of continuous excitation with a Xe lamp. We performed a cell viability assay to evaluate the effect of cytotoxicity by introducing G-dots into cells such as Chinese hamster ovary cells (CHO-K1), mouse muscle cells, and African green monkey kidney cells (COS-7) for 24 hours.

These G-dots are excellent probes for in vitro bioimaging due to their high photostability and low cytotoxicity. Furthermore, byproducts of G-dot synthesis from large food-waste derived sources aided in the growth and development of seedlings germinated on 3DW-supplemented gauze. G-dots hold great promise in a variety of fields, including biomedical imaging, solution state optoelectronics, and plant seed germination and/or growth, due to the advantages of green synthesis, high aqueous stability, high photostability, and low cytotoxicity.

To learn more about food-waste-derived sources, here

https://brainly.com/question/29615794

#SPJ4

Rate of dissociation of a solution is largely depends up on surface area of the solid solute.The correct option is D

Dissociation can be defined as chemical reaction in which a compound breaks apart into two or more components. The general formula for a dissociation reaction follows the form: AB → A + B.

Therefore dissociation reaction may occur when one molecule is divided to form two smaller ones leading to a decrease in energy. Dissociation reactions result in the break down of a large molecule to form smaller products.

Learn more about dissociation here: brainly.com/question/1539195

#SPJ1

Answer:

Explanation:

A is solid, b is melting, c is freezing, d is liquid, e is evaporating, g is gas, and f is condensation.

Hello Mikaela!

Let's start from the top, letter G. Letter G should be gas. Letter F should be condensation. Letter E should be evaporation. Letter D should be liquid. Letter C should be freezing. Letter B should be melting. And letter A should be solid.

I really hope this helps!!

I just know that much if my answer is helpful please mark it brainlist

Answer:

2.44×10²³ molecules

Explanation:

From the question given above, the following data were obtained:

Mass of H₂O = 7.30 g

Number of molecules of H₂O =?

From Avogadro's hypothesis:

1 mole of H₂O = 6.02×10²³ molecules

1 mole of H₂O = (2×1) + 16

= 2 + 16

= 18 g

Thus,

18 g of H₂O = 6.02×10²³ molecules

Finally, we shall determine the number of molecules present in 7.3 g of H₂O. This can be obtained as follow:

From Avogadro's hypothesis:

18 g of H₂O = 6.02×10²³ molecules

Therefore,

7.3 g of H₂O = 7.3 × 6.02×10²³ / 18

7.3 g of H₂O = 2.44×10²³ molecules

Thus, 7.3 g of H₂O contains 2.44×10²³ molecules

Answer:

The sign of ΔH is negative and reaction is exothermic so correct option is D.

Explanation:

Chemical reactions are endothermic if the heat of reaction is written on the reactant side of the equation. The heat of the reaction in exothermic reactions is written on the product side. The energy that is either released or absorbed when chemicals are changed in a chemical reaction is known as the heat of reaction. The heat of reaction, also known as reaction enthalpy, is frequently given as either specific enthalpy in kJ/kg or kJ/L or as molar enthalpy in kJ/mol.

To know about heat of reaction,

https://brainly.com/question/22741007

#SPJ4

The process's H indication The reaction of NaCl(l) NaCl(s) is positive and endothermic.

The process of melting salt is endothermic.

Gibbs free energy is connected to enthalpy change and entropy change at constant temperature in the following ways:

ΔG= ΔH– TΔS

The given reaction is,

                NaCl (l) → NaCl(g)

Now, we know that, as we move from solid to liquid and liquid to gas, entropy increases.

Thus, in the given reaction, entropy increases.

Also, if ΔG> 0, reaction is never spontaneous, and if ΔG< 0, reaction is spontaneous.

Now, as ΔS is positive, so, ΔG will be negative i.e. exothermic if and only if ΔH is negative.

Therefore, the correct option is negative and the process is exothermic. The reaction is as follows: NaCl(l) NaCl (g)

We now know that entropy rises as a substance changes state from solid to liquid and then from liquid to gas.

Entropy so rises in the process described.

Additionally, a reaction is always spontaneous if G > 0, and never if G 0.

Since S is now positive, G will only be exothermic, or negative, if H is also negative.

As a result, the process is exothermic, and the right answer is negative.

To know more about energy visit this:

https://brainly.com/question/1932868

#SPJ1

Answer:

To estimate the enthalpy change for Equilibrium 1, we need to calculate the bond energies for the reactants and products of the reaction and use them to determine the change in enthalpy.

The bond energies for the reactants of Equilibrium 1 are:

C2H4(g): 412 kJ/mol

Cl2(g): 243 kJ/mol

The bond energies for the products of Equilibrium 1 are:

C2H4Cl2(g): 575 kJ/mol

We can use these bond energies to calculate the enthalpy change for Equilibrium 1 as follows:

ΔrH = [C2H4Cl2(g)] - ([C2H4(g)] + [Cl2(g)])

ΔrH = 575 kJ/mol - (412 kJ/mol + 243 kJ/mol)

ΔrH = 120 kJ/mol

Therefore, the enthalpy change for Equilibrium 1 is approximately 120 kJ/mol.

For Equilibrium 2, the bond energies for the reactants are:

C2H4Cl2(g): 575 kJ/mol

The bond energies for the products are:

C2H3Cl(g): 328 kJ/mol

HCl(g): 432 kJ/mol

We can use these bond energies to calculate the enthalpy change for Equilibrium 2 as follows:

ΔrH = ([C2H3Cl(g)] + [HCl(g)]) - [C2H4Cl2(g)]

ΔrH = (328 kJ/mol + 432 kJ/mol) - 575 kJ/mol

ΔrH = -215 kJ/mol

Therefore, the enthalpy change for Equilibrium 2 is approximately -215 kJ/mol.

Ksp for each of the slightly soluble solids

The solubility product constant, also known as the equilibrium constant, is the rate at which a solid material called the solute solubility in an aqueous solution. It is equal to the product of the ionic species on the product side multiplied by the coefficient of each ion with in chemical process. The maximum extent to which a solvent can dissolve in a solution is shown by the Ksp of each dissolution reaction, which is determined by the solubility rules. The max number of solute that can dissolve in a solvent at balance is defined as solubility. The state in which the concentration levels of products and reactants are continuous after the reaction has occurred is referred to as equilibrium.

learn more about ksp here;

https://brainly.com/question/27132799

#SPJ4

Answer:

Global wind patterns

Ocean currents

Global climates

Explanation:

Edge2021 correct

The factors that were affected by the breakup of the supercontinent Pangaea include global wind patterns, ocean currents, and global climates.

The Pangea was a super-landmass that originally gave rise to all continents on the Earth planet.

According to the theory of continental drift, the Pangea break up millions of years ago to generate the continents.

This theory (continental drift) has been replaced by the tectonic plate model, but the idea of Pangea has still support in the scientific community.

In conclusion, the factors that were affected by the breakup of the supercontinent Pangaea include global wind patterns, ocean currents, and global climates.

Learn more about the Pangea here:

https://brainly.com/question/1557027

The equilibrium concentration of reactants and products are i.e.

[H2]=0.049,[I2]= 0.049,[HI]=0.36.

What is equilibrium concentration?

When the products and reactants remain constant over time, a chemical is said to be at equilibrium concentration. In other words, the rate of forward reaction in a chemical reaction must equal the rate of backward reaction in order for there to be chemical equilibrium, also known as equilibrium concentration.

For detailed calculation please refer attached file.

For more information about equilibrium concentration please visit:

https://brainly.com/question/13414142

#SPJ4

The balanced equation of combustion of the butane is:

2C₄H₁₀ (g) + 13 O₂ (g)  → 8 CO₂ (g) + 10 H₂O (g)

The volume of the butane, oxygen, CO₂, and water is 44.8 L, 291.2 L, 179.2 L, and 224 L.

The chemical equation is said to be balanced if the number of atoms of each element is equal on both sides of the chemical equation.

The law of conservation of mass should be followed while balancing of a chemical equation.  By obeying this law, the total mass on both sides of the equation will be equal in a balanced chemical equation.

Given the equation is 2 C₄H₁₀(g)  + 13 O₂ (g)  → 8 CO₂ (g) + 10 H₂O (g)

The moles of the butane = 2 mol

The volume of the butane = 2 ×22.4 = 44.8 L

The volume of the oxygen = 13 ×22.4 = 291.2 L

The volume of the carbon dioxide = 8 ×22.4 = 179.2 L

The volume of the water = 10 ×22.4 = 224 L

Learn more about the balanced chemical equation, here:

brainly.com/question/28294176

#SPJ1

Answer:

Bubbling can indicate a chemical reaction

Explanation:

Chemical reaction takes place with the beginning of bubbles and foam when hydrogen peroxide is put onto an open wound. This compound does not only heal the wound but also damages the body as it also kills the nearby healthy cells.

Chemical reaction is a process which leads to chemical transformation of a chemical substance into another.

Hydrogen peroxide bubbles when it comes into contact with an enzyme called catalase. Most of the cells in the body contain catalase enzyme, so whenever the tissue is damaged, the enzyme catalase is released from the cell and it becomes available to react with the peroxide ion.

Hydrogen peroxide applied on a cut produces a white, fizzling foam which is actually a sign that the solution is killing the bacteria as well as the healthy cells around it.

Learn more about Chemical reaction here:

https://brainly.com/question/3461108

#SPJ2

It is untrue that a bcc structure packs monatomic solids more effectively than just a fcc structure because it uses different unit cells.

The central atom and the eight eighths from of the corners make up the BCC unit cell's final atomic composition, which is two atoms overall. Again, there seem to be eight atoms in the unit cell's corners in the FCC layout, and one atom is positioned in the middle of each face. The neighboring cell and the molecule in the face are connected.

Since the atom in this novel shape is located in the cube's body, it is known as a body-centered cubic structure (see the diagram below). Iron in its phase, chromium, tungsten, tantalum, or molybdenum are a few metals that have this crystalline structure.

To know more about  BCC structure visit:

https://brainly.com/question/13098373

#SPJ4

Based on the Lewis structure, SCl₂ is a polar molecule whereas CBr₄ is a non-polar molecule.

Lewis dot structures, also known as electron dot structures, are pictorial representations that show the interatomic chemical bonds in a molecule. They also depict how many lone pairs are overall in each atom that makes up the molecule. Common names for Lewis dot structures include electron dot structures and Lewis structures. Lewis described an acid as an electron pair acceptor, while a base is an electron pair giver. One dot is included in a Lewis Electron Dot Formula along with the symbol of the element and each valence electron.

Hence, Lewis structure denotes nature of molecules

To know more about Bond.

https://brainly.com/question/10777799

#SPJ4

The reaction mechanisms of dissolution processes are discussed for the balanced equation for the recovery of germanium from its oxide ore is GeO2 + heat= Ge+O2(g)

The balanced equation for the recovery of germanium from its oxide ore is GeO2 + heat= Ge+O2(g)

To know more about compounds visit

brainly.com/question/14117795

#SPJ4

To solve this, we must know each and every concept related to mechanisms of organic reaction. Therefore, the  arrow that best describes the relationship between the reactants and products is the equilibrium arrow. The correct option is option A.

The technique of just an organic reactions is just the order of the steps in the process, giving information on which bonds are produced and/or disrupted in each step.

Understanding the processes of organic reactions is vital for understanding Organic Chemistry and for being able to harness the reactions to generate useful molecules. The  arrow that best describes the relationship between the reactants and products is the equilibrium arrow.

Therefore, the correct option is option A.

To know more about mechanisms of organic reaction, here:

https://brainly.com/question/29459601

#SPJ4

Answer:

4

Explanation:

All numbers in the calculation are to 4 significant figures.

The oceans absorb the most sunlight from the options that we have here.

Seventy-one percent or more of the surface of the Earth is covered by the oceans. The result is that they get a lot of sunshine. The upper layers of the ocean absorb a large amount of the incoming solar energy, which enters the ocean waters.

Solar radiation is efficiently absorbed by water, especially in the visible light spectrum. The ocean heats the water as a result of absorbing sunshine. The oceans' ability to absorb solar energy is vital for driving a variety of marine phenomena, including currents, circulation patterns, and temperature distribution, as well as managing Earth's climate.

Learn more about earth:https://brainly.com/question/12041467

#SPJ1

Answer:

The answer is A. Oceans.

Explanation:

I did the test.

i When sodium carbonate (Na2CO3) is mixed with an aqueous solution of copper(II) sulfate (CuSO4), the student can expect to see several evidence of a chemical reaction:

Formation of a solid precipitate: When these two solutions are mixed, a solid precipitate of copper(II) carbonate (CuCO3) will form. This is a sign that a chemical reaction has occurred.

Change in color: The reaction between sodium carbonate and copper(II) sulfate will also result in a change in color. The solution may turn a blue or green color, indicating the presence of copper(II) ions.

Release of gases: The reaction between sodium carbonate and copper(II) sulfate may also produce gases, such as carbon dioxide (CO2).

ii The balanced chemical equation for the reaction between sodium carbonate and copper(II) sulfate is:

2Na2CO3(aq) + CuSO4(aq) → 2Na2SO4(aq) + CuCO3(s)

iii This is a double displacement reaction, also known as a metathesis reaction. In this type of reaction, the cations (positively charged ions) and anions (negatively charged ions) of the reactant compounds exchange places to form the products. In this case, the sodium ions (Na+) and the copper ions (Cu2+) exchange places to form sodium sulfate (Na2SO4) and copper carbonate (CuCO3).

Relation of structure of an enzyme to its reaction specificity :The reaction specificity relates to unique shape of active site to which only a complementary shape can bind.

The relationship between enzyme structure and enzyme specificity is that an enzyme's form, which is a result of its amino acid sequence, determines how specific it is.

An enzyme's three-dimensional structure, which is essential to its normal operation, determines how specific it is. The lock-and-key theory of enzyme activity states that the three-dimensional structure of an enzyme's active site enables the enzyme to bind readily to just certain substrates.

To know more about enzyme specificity, refer

https://brainly.com/question/15538257

#SPJ4

The medicine rocecoxib, often known as viox, comprises an atom of this element double-bonded to two distinct oxygens.

Celecoxib is a nonsteroidal anti-inflammatory medicine (NSAID) used to treat mild to moderate pain and help reduce symptoms of arthritis, such as inflammation, swelling, stiffness, and joint discomfort (e.g., osteoarthritis, rheumatoid arthritis, or juvenile rheumatoid arthritis).

People who use NSAIDs (non-aspirin non-steroidal anti-inflammatory drugs), such as celecoxib, may be more likely to experience a heart attack or stroke than those who do not use these treatments. These occurrences could be fatal and could occur suddenly.

To know more about trade name visit:

https://brainly.com/question/29334811

#SPJ4