Consider the given state of stress. Take X = 36 MPa and Y = 65 MPa. Determine the maximum shearing stress when σz = +24 MPa. Determine the maximum shearing stress when σz = −24 MPa. Determine the maximum shearing stress when σz = 0.

Answers

Answer 1

Consider the given state of stress. Take X = 36 MPa and Y = 65 MPa. The maximum shearing stress when σz = +24 MPa is 28.03 MPa. The maximum shearing stress when σz = -24 MPa is also 28.03 MPa.the maximum shearing stress when σz = 0 MPa is 14.5 MPa.

To determine the maximum shearing stress in each case, we need to use the following formulas:

  Maximum Shearing Stress (τmax) = (σx - σy) / 2

  Principal Stress (σ1, σ2) = (σx + σy) / 2 ± √[((σx - σy) / 2)^2 + τzx^2]

Given:

σx = 36 MPa

σy = 65 MPa

Let's calculate the maximum shearing stress for each value of σz:

Case 1: σz = +24 MPa

Using the formula for principal stress, we have:

σ1 = (36 + 65) / 2 + √[((36 - 65) / 2)^2 + (24^2)]

= 50.5 + √[(-14.5)^2 + 576]

= 50.5 + √(210.25 + 576)

= 50.5 + √(786.25)

= 50.5 + 28.03

= 78.53 MPa

σ2 = (36 + 65) / 2 - √[((36 - 65) / 2)^2 + (24^2)]

= 50.5 - √[(-14.5)^2 + 576]

= 50.5 - √(210.25 + 576)

= 50.5 - √(786.25)

= 50.5 - 28.03

= 22.47 MPa

Now, let's calculate the maximum shearing stress using the formula:

τmax = (σ1 - σ2) / 2

= (78.53 - 22.47) / 2

= 56.06 / 2

= 28.03 MPa

Therefore, the maximum shearing stress when σz = +24 MPa is 28.03 MPa.

Case 2: σz = -24 MPa

Following the same steps, we have:

σ1 = (36 + 65) / 2 + √[((36 - 65) / 2)^2 + (-24^2)]

= 50.5 + √[(-14.5)^2 + 576]

= 50.5 + √(210.25 + 576)

= 50.5 + √(786.25)

= 50.5 + 28.03

= 78.53 MPa

σ2 = (36 + 65) / 2 - √[((36 - 65) / 2)^2 + (-24^2)]

= 50.5 - √[(-14.5)^2 + 576]

= 50.5 - √(210.25 + 576)

= 50.5 - √(786.25)

= 50.5 - 28.03

= 22.47 MPa

τmax = (σ1 - σ2) / 2

= (78.53 - 22.47) / 2

= 56.06 / 2

= 28.03 MPa

Therefore, the maximum shearing stress when σz = -24 MPa is also 28.03 MPa.

Case 3: σz = 0 MPa

Using the same approach, we have:

σ1 = (36 + 65) / 2 + √[((36 - 65) / 2)^2 + (0^2)]

= 50.5 + √[(-14.5)^2 + 0]

= 50.5 + √(210.25)

= 50.5 + 14.5

= 65 MPa

σ2 = (36 + 65) / 2 - √[((36 - 65) / 2)^2 + (0^2)]

= 50.5 - √[(-14.5)^2 + 0]

= 50.5 - √(210.25)

= 50.5 - 14.5

= 36 MPa

τmax = (σ1 - σ2) / 2

= (65 - 36) / 2

= 29 / 2

= 14.5 MPa

Therefore, the maximum shearing stress when σz = 0 MPa is 14.5 MPa.

To learn more about shearing stress visit: https://brainly.com/question/30407832

#SPJ11


Related Questions

I RATE
1. Define a label object my_label which displays the following text:
"Hi There"
2. Given a method as below:
def click(self):
self.data.set('India')
define a button object b1 that will call the above method when user clicks on the b1 button

Answers

A root window is created using Tk(), the Example class is instantiated with the root as the parameter, and the code enters the main event loop using root.mainloop().

from tkinter import *

class Example:

   def __init__(self, master):

       frame = Frame(master)

       frame.pack()

       self.data = StringVar()

       

       my_label = Label(frame, text="Hi There")

       my_label.pack()

       

       b1 = Button(frame, text="Click me", command=self.click)

       b1.pack()

   

   def click(self):

       self.data.set('India')

root = Tk()

e = Example(root)

root.mainloop()

In this code, a class named Example is defined, which is initialized with a master parameter representing the parent widget. Inside the class, a frame is created and packed. Then, a StringVar() named data is defined.

A label object my_label is created with the text "Hi There" and packed using the pack() method. Next, a button object b1 is defined with the text "Click me" and the command self.click. The command parameter specifies that the click() method will be called when the button is clicked.

Finally, a root window is created using Tk(), the Example class is instantiated with the root as the parameter, and the code enters the main event loop using root.mainloop().

Learn more about loop visit:

https://brainly.com/question/14390367

#SPJ11

Client puzzles and amplification Denial-of-service (DoS) attacks attempt to overwhelm a server with a huge volume of requests. Researchers have proposed a defense against DoS attacks called client puzzles: For each request, the server sends the client a freshly generated random challenge r and a difficulty parameter n, and the client has to produce a solution s such that the last n bits of HMAC (s) are all 0. Clients must present a valid solution to receive service.
(a) What is the expected number of HMAC computations for the client to compute the solution? How many HMAC computations does it take for the server to check the
solution?
(b) Suppose a "unit of work" is equivalent to the difficulty of computing one HMAC. If an attacker enjoys an amplification factor of 64 (i.e., the attacker can cause the server to
do 64 units of work by expending one unit of work), what should n be to negate this advantage using client puzzles?

Answers

To negate the attacker's advantage using client puzzles, the difficulty parameter n should be set to 6, ensuring that the client needs to perform 64 HMAC computations to produce a valid solution while the server only needs to perform one computation to check the solution.

(a) The expected number of HMAC computations for the client to compute the solution depends on the difficulty parameter n and the randomness of the generated challenge. Since the challenge is freshly generated and random, each attempt by the client has an equal probability of producing a valid solution. Therefore, on average, the client would need to make 2^n attempts to find a valid solution.

For the server to check the solution, it only needs to perform a single HMAC computation to verify if the last n bits of HMAC(s) are all 0. This is a relatively quick operation compared to the client's computation.

(b) To negate the attacker's amplification advantage of 64, the difficulty parameter n should be set such that the client needs to perform 64 units of work to produce a valid solution. Since each unit of work for the client corresponds to one HMAC computation, the difficulty parameter n should be chosen such that 2^n is equal to 64. Solving 2^n = 64 gives n = 6.

Know more about HMAC computations here:

https://brainly.com/question/32243451

#SPJ11

The continuous time signal xe (t) = sin (13πt)+cos(k13πt) where
k =2.
is sampled with a sample period T to obtain the discrete-time signal
x [n] = sin()+cos() where A =19
Choose the smallest possible value of T in milliseconds/sample consistent with this information.
Provide a number as your answer with an accuracy of two decimal digits.

Answers

The continuous time signal xe (t) = sin (13πt)+cos(k13πt) where k =2 is sampled with a sample period T to obtain the discrete-time signal .x [n] = sin()+cos() where A =19.The smallest possible value of T in milliseconds/sample consistent with the given information is approximately 0.01224 milliseconds/sample.

To determine the smallest possible value of T in milliseconds/sample consistent with the given information, we need to consider the sampling rate. The sampling rate is the reciprocal of the sample period.

Given:

k = 2

A = 19

The sampling rate is determined by the highest frequency component in the continuous-time signal, which is 13π. According to the Nyquist-Shannon sampling theorem, the sampling rate must be at least twice the highest frequency component to avoid aliasing.

Therefore, the minimum sampling rate (Fs) can be calculated as:

Fs = 2 * 13π

Now, we can calculate the sample period (T) using the sampling rate (Fs):

T = 1 / Fs

Let's calculate the value of T in milliseconds/sample:

Fs = 2 * 13 * π ≈ 81.6814

T = 1 / Fs ≈ 1 / 81.6814 ≈ 0.01224

Therefore, the smallest possible value of T in milliseconds/sample consistent with the given information is approximately 0.01224 milliseconds/sample.

To learn more about Nyquist-Shannon sampling theorem visit: https://brainly.com/question/28592924

#SPJ11

The query engine supports two ways to define joins:
The ANSI SQL-92 syntax (in which the join is specified in the FROM clause) and the older ANSI SQL-89 syntax (in which the join is specified in the WHERE clause). The ANSI SQL-92 syntax is the preferred approach

Answers

The query engine supports two ways to define joins: the ANSI SQL-92 syntax and the older ANSI SQL-89 syntax. However, the ANSI SQL-92 syntax is the preferred approach.

In the ANSI SQL-92 syntax, the join is specified in the FROM clause of the query. It uses explicit JOIN keywords, such as INNER JOIN, LEFT JOIN, RIGHT JOIN, or FULL JOIN, to define the type of join and the related tables or views to be joined. This syntax provides a clear and structured way to express the join operation, making the query more readable and easier to understand.

On the other hand, the ANSI SQL-89 syntax specifies the join conditions in the WHERE clause of the query, using equality operators (=) to link the tables. This syntax is considered older and less expressive compared to the ANSI SQL-92 syntax.

While the query engine supports both syntaxes, it is generally recommended to use the ANSI SQL-92 syntax for defining joins. It offers more flexibility, readability, and better adherence to standard SQL conventions, making it the preferred approach for writing join queries.

Learn more about ANSI SQL-89 syntax here:

https://brainly.com/question/31586609

#SPJ11

In a planned experiment, a thermocouple is to be exposed to a step change in temperature. The response characteristics of the thermocouple must be such that the thermocouple's output reaches 98% of the final temperature within 5 s. Assume that the thermocouple's bead (its sensing element) is spherical with a density equal to 8000 kg/m3, a specific heat at constant volume equal to 380 J/(kg.K), and a convective heat transfer coefficient equal to 210 W/(m2.K). Determine the maximum diameter [] that the thermocouple can have and still meet the desired response characteristics. The unit is millimeter.

Answers

Answer:

max Diameter = 0.530 mm

Explanation:

Calculate the maximum Diameter that the thermocouple should have

applying this formula : e = [tex]\frac{SvCv}{hA}[/tex]  ------ ( 1 )

mass = density * volume

Time constant = mc / hA

attached below is the detailed solution

r ( diameter ) = 0.530 mm

A VA rating is more relevant when judging the current delivery capacity for a given signal source.
True or false

Answers

The statement "A VA rating is more relevant when judging the current delivery capacity for a given signal source" is false.VA stands for Volt-Ampere, which is a unit of power in an electrical system. It measures the overall power delivered to a load (such as an electronic device) by an alternating current (AC) source.

The VA rating is determined by multiplying the RMS (root-mean-square) voltage by the RMS current delivered to the device. It is frequently used to rate UPS (Uninterruptible Power Supply) systems, which are devices that provide backup power in the event of a power outage.The statement is incorrect because VA ratings are not relevant to signal sources. They are only used to rate the power delivery capacity of electrical systems, such as UPS devices. Signal sources, such as audio or video equipment, are usually rated in watts (W), which is a unit of power that indicates how much power is required to drive the device to a given volume or brightness level.A VA (volt-ampere) rating is typically used to measure the power capacity or power consumption of an electrical device or system, such as transformers, generators, or power supplies. It represents the product of voltage and current, indicating the apparent power.

To learn more about root-mean-square visit: https://brainly.com/question/30959432

#SPJ11

Overload protection of the internal components is covered in the Standards. Select one: A. UL B. TUV C. NFPA D. ICEA

Answers

The correct option is A. UL. The Underwriters Laboratories (UL) Standards, which is a nationally recognized testing laboratory, covers overload protection of the internal components of electrical equipment.

The UL offers testing and certification for safety and performance to a variety of products, including electronics, electrical equipment, and appliances.UL certification also provides information about the product's maximum load capacity, or the maximum amount of current it can carry before it fails. Furthermore, the UL certification process evaluates all components of a product, including its internal components, for their compliance with national safety standards.Internal overload protection is a type of electrical protection that is used in electrical systems to safeguard against overload conditions. The goal of this protection is to limit the amount of current that is allowed to flow through the system by either turning off the power supply or reducing the amount of current allowed to flow.Overload protection is an essential safety feature that is required in electrical equipment. Overloads can cause equipment to overheat, which can lead to the malfunction of internal components or, in severe cases, to equipment failure. Overloads can also cause fires, explosions, and other safety hazards.Therefore, to ensure the safety of electrical equipment, UL standards provide guidelines for designing, testing, and certifying overload protection in electrical equipment.

Learn more about Underwriters Laboratories here:-

https://brainly.com/question/30700393
#SPJ11

Plumbing


The should indicate the materials, fixtures, and faucets to be
used.
A. specifications
B. plumbing code
C. mechanical code
D. plumbing instructor

Answers

Answer:

B....................

What are some business concerns you might have if you want to retrieve the data to determine the superior for each martin even if each martin does not have a superior and did not use the correct join?
From a readability standpoint, what are the pros and cons of using table aliases when writing SQL? What are the issues when not using column aliases in the data that is displayed?
What reason would you use a subquery and right join to return the data for the Inventory Report? What happens if you didn’t use the right join?

Answers

If you want to retrieve the data to determine the superior for each Martin, even if each Martin does not have a superior and did not use the correct join, some business concerns you might have include:

1. **Data Accuracy**: The retrieved data may not accurately reflect the superior for each Martin if the join is not correct. It could result in incorrect or missing information, leading to inaccurate decision-making or analysis.

2. **Incomplete Insights**: Without the correct join, the analysis may not provide a complete picture of the hierarchical structure or relationships within the organization. This can hinder understanding and hinder the ability to identify patterns or trends.

3. **Impact on Decision-Making**: If the retrieved data does not reflect the actual superior for each Martin, it may impact decision-making processes that rely on this information. It can affect promotions, reporting lines, or delegation of authority, potentially leading to confusion or inefficiencies within the organization.

From a readability standpoint, using table aliases in SQL queries can have several pros and cons:

Pros of using table aliases:

1. **Conciseness**: Table aliases provide a shorthand notation for referring to tables, which can make the SQL code more concise and easier to read.

2. **Improved Readability**: Table aliases can improve code readability by reducing the need to repeat long table names throughout the query. They make the code more compact and focused on the logic being expressed.

3. **Clarity in Joins**: When using joins involving multiple tables, table aliases can make it clearer which tables are being joined and how they are related.

Cons of using table aliases:

1. **Reduced Understandability**: In some cases, table aliases can make the code less understandable, especially if non-standard or overly complex aliases are used. It is important to choose aliases that are intuitive and make the code more readable rather than introducing unnecessary complexity.

2. **Potential Confusion**: If the same alias is used for different tables within a query, it can cause confusion and make it difficult to interpret the query correctly. Using unique and meaningful aliases is essential to avoid such confusion.

When not using column aliases in displayed data, some issues can arise:

1. **Ambiguity**: If column aliases are not used, the column names displayed in the output may not be clear or descriptive. This can make it difficult for users to understand the meaning or purpose of each column.

2. **Cluttered Output**: Without column aliases, the displayed data may have long and cumbersome column names that can make the output visually cluttered and harder to interpret.

3. **Data Integrity**: When displaying data without column aliases, there is a risk of potential data integrity issues if the columns are misinterpreted or incorrectly used in subsequent processes or analysis. Clear aliases help ensure proper understanding and usage of the data.

A subquery and right join may be used to return the data for the Inventory Report in situations where you want to include all the records from the right table (Inventory) regardless of whether there is a match in the left table (Report). The subquery can be used to fetch relevant data for the report, and the right join ensures that all inventory records are included in the result, even if there is no matching report record.

If you didn't use the right join and instead used an inner join, only the matching records between the Report and Inventory tables would be returned. The result would exclude any inventory records that do not have a corresponding report. This can lead to incomplete or inaccurate data in the Inventory Report, as it would not reflect the full inventory information.

Learn more about Data Accuracy here:

https://brainly.com/question/32095111

#SPJ11

A jet leaves Oslo, whose latitude is 60 degrees north of the equator, and flies due west
until it returns to Oslo. How far does the jet travel? The radius of the earth is 3960 miles

Answers

The jet travels approximately 12440.70 miles.

How far does the jet travel when flying due west from Oslo?

To know distance traveled by the jet when flying due west from Oslo, we will calculate circumference of the latitude circle at 60 degrees north of the equator and then multiply it by the fraction of the circle covered by the jet.

The circumference of a circle is given by the formula: C = 2πr, where r is the radius of the circle.

Given that the radius of the Earth is 3960 miles, The circumference of the latitude circle at 60 degrees north will be:

C = 2π * 3960 * cos(60°)

Using the value of π ≈ 3.14159 and the cosine of 60 degrees = 0.5, the calculation becomes:

C = 2 * 3.14159 * 3960 * 0.5

C = 12440.6964 miles

C = 12440.70 miles.

Read more about Distance

brainly.com/question/26550516

#SPJ4

what is the answer to life the universe and everything
(worth 95 points!)

Answers

i would say nothing, time is endless and the cycle of life is endless, not only on earth but almost anywhere, people try to find answers like what’s at the bottom of the ocean and stuff like that but there’s no point in finding out because it has no benefit, life is made for different reasons so there’s not one answer to it

Answer:

In the absence of dark energy, a flat universe expands forever but at a continually decelerating rate, with expansion asymptotically approaching zero; with dark energy, the expansion rate of the universe initially slows down, due to the effects of gravity, but eventually increases, and the ultimate fate of the universe ...

Explanation:

I think it goes on forever.

draw the logic diagram for a 16 to 4 encoder using just four 8-input nand gates. what are the active levels of the inputs and outputs in your design ?

Answers

Due to the fact that there are a total of four possible logic combinations that may be created using just two variables, the initial stage of the 2-to-4 decoder requires four 2-input NAND gates.

A NAND gate (NOT-AND) is a logic gate used in digital electronics that creates an output that is false only if all of its inputs are true; as a result, it is the complement to an AND gate.

Only when all of the gate's inputs are HIGH (1) does the output become LOW (0); otherwise, the output becomes HIGH (1) if any input is LOW (0). Transistors and junction diodes are used to create NAND gates. According to De Morgan's rules, the logic of a two-input NAND gate may be written as A • B=A+B, making it the same as inverters followed by an OR gate.

Because any boolean function may be implemented using a combination of NAND gates, the NAND gate is important. The term functional completeness refers to this quality.

To know more about NAND gate click here:

brainly.com/question/12969448

#SPJ4

***Use MATLAB ONLY***
***Use MATLAB ONLY***
A cylindrical aluminum fuel tank has an outside diameter of 30 in. and a height of 50 in. The thickness of the wall is t, and the bottom and top ends are 25% thicker. The specific weight of aluminum is 165 lb/ft³. (SW = Weight/Volume). Determine t if the weight of the tank is 152 lb. Hint: Use symbolic variable t to define the volume of the object. Use proper units.

Answers

The provided MATLAB code uses symbolic variables and equations to determine the thickness of a cylindrical aluminum fuel tank. The tank has an outside diameter of 30 inches, a height of 50 inches, and a weight of 152 pounds. The specific weight of aluminum is 165 pounds per cubic foot. The code calculates the dimensions and volumes of the inner cylinder and the top and bottom ends of the tank. It then determines the total volume of the tank and calculates the weight based on the specific weight. The weight equation is set up and solved for the thickness of the tank wall. The resulting thickness value is obtained and represents the required thickness to meet the given weight constraint.

To solve this problem using MATLAB, we can utilize symbolic variables and equations. Here's the MATLAB code to determine the thickness of the fuel tank wall:

```matlab

syms t

outside_diameter = 30; % in

height = 50; % in

specific_weight = 165; % lb/ft^3

weight_tank = 152; % lb

% Calculate the dimensions of the inner cylinder

inner_diameter = outside_diameter - 2*t;

inner_radius = inner_diameter / 2;

inner_volume = pi * inner_radius^2 * height;

% Calculate the dimensions of the top and bottom ends

end_thickness = 1.25 * t;

end_volume = pi * (inner_radius + end_thickness)^2;

% Calculate the total volume of the tank

total_volume = inner_volume + 2 * end_volume;

% Calculate the weight of the tank

weight_volume = specific_weight * total_volume / 12^3; % Convert to lb

equation = weight_volume == weight_tank;

% Solve the equation for t

solution = solve(equation, t);

thickness = double(solution);

```

The code defines a symbolic variable `t` to represent the thickness of the wall. It then calculates the dimensions and volumes of the inner cylinder and the top and bottom ends of the tank based on the given information.

Next, the total volume of the tank is calculated by summing the volumes of the inner cylinder and the two ends. The weight of the tank is then calculated using the specific weight of aluminum.

An equation is set up equating the weight of the tank to the weight calculated based on the volume. The `solve` function is used to solve the equation for `t`, and the result is stored in the variable `thickness`.

Finally, the `thickness` value is converted to a numeric value using `double` and represents the thickness of the tank wall that satisfies the given conditions.

Learn more about MATLAB code here:-

https://brainly.com/question/12950689
#SPJ11

When we consider BJT transistors in the context of a circuit design, we are usually employing the device in a common-emitter configuration, and we specify VBE and VCE rather than the VBC which appears in the Ebbers­Moll model, but of course we can easily calculate VBC from VBE and VCE . Using the Ebers­Moll parameters from Problem 2, evaluate the following: a) For VBE = 0.645 V and VCE = 1.500 V, evaluate VBC and state what is the operating mode of the device. (Forward active, Saturation, Reverse active, or Cutoff) b) Evaluate IC and IB for this bias condition. c) For VBE = 0.645 V and VCE = 0.150 V, evaluate VBC and state what is the operating mode of the device. (Forward active, Saturation, Reverse active, or Cutoff) d) Evaluate IC and IB for this bias condition.

Answers

Using the Ebers­Moll parameters (a)The operating mode of the device is forward active. This is because the base-emitter junction is forward biased and the collector-base junction is reverse biased.(b)IB = 1.0 mA(c)The operating mode of the device is saturation. This is because the collector-base junction is forward biased.The operating mode of the device is saturation. This is because the collector-base junction is forward biased.(d)IB =  10 mA

a) VBC can be calculated from VBE and VCE using the following equation:

VBC = VBE - VCE

The operating mode of the device is forward active. This is because the base-emitter junction is forward biased and the collector-base junction is reverse biased.

b) IC can be calculated using the following equation:

IC = β * IB

where β is the current gain of the transistor. The current gain of the transistor is given in Problem 2 as 100. Plugging in the values from the problem statement, we get:

IC = 100 * 0.010 A = 1.0 A

a) VBC can be calculated from VBE and VCE using the following equation:

VBC = VBE - VCE

Plugging in the values from the problem statement, we get:

VBC = 0.645 V - 1.500 V = -0.855 V

The operating mode of the device is forward active. This is because the base-emitter junction is forward biased and the collector-base junction is reverse biased.

b) IC can be calculated using the following equation:

IC = β * IB

where β is the current gain of the transistor. The current gain of the transistor is given in Problem 2 as 100. Plugging in the values from the problem statement, we get:

IC = 100 * 0.010 A = 1.0 A

IB can be calculated using the following equation:

IB = IC / β

Plugging in the values from the problem statement, we get:

IB = 1.0 A / 100 = 1.0 mA

c) VBC can be calculated from VBE and VCE using the following equation:

VBC = VBE - VCE

Plugging in the values from the problem statement, we get:

VBC = 0.645 V - 0.150 V = 0.495 V

The operating mode of the device is saturation. This is because the collector-base junction is forward biased.

d) IC can be calculated using the following equation:

IC = β * IB

where β is the current gain of the transistor. The current gain of the transistor is given in Problem 2 as 100. Plugging in the values from the problem statement, we get:

IC = 100 * 1.0 mA = 10 A

IB can be calculated using the following equation:

IB = IC / β

Plugging in the values from the problem statement, we get:

IB = 10 A / 100 = 10 mA

To learn more about transistor visit: https://brainly.com/question/1426190

#SPJ11

When an arbitrary substance undergoes an ideal throttling process through a valve at steady state, (SELECT ALL THAT APPLY) inlet and outlet mass flowrates will be equal. inlet and outlet specific enthalpies will be equal. inlet and outlet pressures will be equal. inlet and outlet mass flowrates will be equal. inlet and outlet specific enthalpies will be equal. inlet and outlet temperatures will be equal.

Answers

Answer:

15x

Explanation:

safe the release train engineer is a servant leader who displays which two actions or behaviors

Answers

The Release Train Engineer (RTE) is responsible for facilitating the Agile Release Train (ART) events and processes and enabling Agile Teams to deliver value.

As a servant leader, the RTE performs two key actions or behaviors that distinguish them from traditional management roles.Firstly, the Release Train Engineer is responsible for ensuring that the ART operates smoothly and efficiently. They accomplish this by facilitating program-level processes and execution, collaborating with other RTEs, managing risks and dependencies, and communicating with stakeholders. By doing so, they help Agile Teams to focus on delivering value and to eliminate any impediments that may arise.Secondly, the Release Train Engineer serves as a servant leader to the Agile Teams, who helps to promote a culture of continuous improvement and learning. They accomplish this by coaching the Agile Teams on Agile and Lean principles, facilitating effective collaboration, and helping to resolve impediments that arise. They also help the Agile Teams to develop and implement their own improvement plans, which are focused on delivering more value to customers and stakeholders.In summary, the Release Train Engineer is a servant leader who is responsible for ensuring that the ART operates efficiently and promoting a culture of continuous improvement and learning. By performing these two key actions or behaviors, the RTE helps Agile Teams to deliver more value and to improve their own performance.

To know more about stakeholders visit :

https://brainly.com/question/29532080

#SPJ11

For the accident of Gulf of Mexico Oil Spill, British Petroleum took the following steps to pay for the serious consequences (i=7% per quarter). Pay $3 billion at the end of the third quarter of 2010 and another $2 billion at the end of the fourth quarter of 2010. Make payments of $1.25 billion each quarter thereafter until a total of $20 billion (the total $20 billion includes the payments in 2010). a) Develop a cash flow diagram. b) What is the equivalent present value at the beginning of the third quarter of 2010? c) What is the equivalent present value at the beginning of the first quarter of 2010? d) What is the equivalent future value at the end of 2013?

Answers

a) Cash Flow Diagram:

```

           |------> $3 billion ------>|

           |                          |

           |------> $2 billion ------>|

           |                          |

$1.25 billion |------> $1.25 billion -->|

  per quarter|       per quarter       |

           |                          |

           |------> $1.25 billion -->|

           |       per quarter       |

           |                          |

           |       ... (repeated)     |

           |                          |

           |------> $1.25 billion -->|

           |       per quarter       |

```

b) To calculate the equivalent present value at the beginning of the third quarter of 2010, we need to discount each cash flow to its present value using the given interest rate of 7% per quarter. The present values are then added together.

c) To calculate the equivalent present value at the beginning of the first quarter of 2010, we need to discount each cash flow to its present value using the given interest rate of 7% per quarter. However, since the cash flows start from the third quarter of 2010, we need to discount the first two quarters' payments to their present value as well. The present values are then added together.

d) To calculate the equivalent future value at the end of 2013, we need to find the future value of each cash flow using the given interest rate of 7% per quarter. The present values are then added together.

e) Calculations for parts b, c, and d. However, by applying appropriate discounting or compounding formulas based on the given interest rate, you can determine the equivalent present or future values at specific time points.

To analyze the cash flow associated with the Gulf of Mexico Oil Spill, we can create a cash flow diagram. Each arrow represents a cash flow, and the time periods are indicated below each arrow. The diagram shows the cash inflows and outflows over time.

a) Cash Flow Diagram:

```

           |------> $3 billion ------>|

           |                          |

           |------> $2 billion ------>|

           |                          |

$1.25 billion |------> $1.25 billion -->|

  per quarter|       per quarter       |

           |                          |

           |------> $1.25 billion -->|

           |       per quarter       |

           |                          |

           |       ... (repeated)     |

           |                          |

           |------> $1.25 billion -->|

           |       per quarter       |

```

b) To calculate the equivalent present value at the beginning of the third quarter of 2010, we need to discount each cash flow to its present value using the given interest rate of 7% per quarter. The present values are then added together.

c) To calculate the equivalent present value at the beginning of the first quarter of 2010, we need to discount each cash flow to its present value using the given interest rate of 7% per quarter. However, since the cash flows start from the third quarter of 2010, we need to discount the first two quarters' payments to their present value as well. The present values are then added together.

d) To calculate the equivalent future value at the end of 2013, we need to find the future value of each cash flow using the given interest rate of 7% per quarter. The present values are then added together.

e) Calculations for parts b, c, and d. However, by applying appropriate discounting or compounding formulas based on the given interest rate, you can determine the equivalent present or future values at specific time points.

For more such questions on discount, click on:

https://brainly.com/question/23865811

#SPJ8

in series RL circuit, as the phase angle between the applied voltage and the total current increases, this is the same as: (a.) apparent power decreasing. (b) power factor decreasing. (c) power factor increasing. (d) true power decreasing.

Answers

In series RL circuit, as the phase angle between the applied voltage and the total current increases, the power factor decreases. The correct option is (b) power factor decreasing.

Explanation: What is an RL circuit?An RL circuit is made up of a resistor and an inductor linked in series with a voltage source or current source, such as a battery. The voltage across the resistor and the inductor varies as a function of time due to the time-varying magnetic field inside the inductor. The inductor opposes the change in current, while the resistor opposes the flow of current. As a result, the current in an RL circuit rises slowly when the voltage is first applied, then levels off at a constant value. The total current in the circuit is the vector sum of the current in the resistor and the inductor.In RL circuit, the current does not rise to its maximum value instantly after the voltage is applied, as there is an inductive reactance present. The phase difference between the voltage and current is therefore responsible for the power factor. As the phase angle between the applied voltage and the total current increases in series RL circuit, the power factor decreases.

Learn more about RL circuit, here https://brainly.in/question/17762894

#SPJ11

Which incident taught us the importance of working with our neighbors to inform them and protect them from the risks in our facilities? (Select the best answer and then click 'Submit.') Bhopal Imperial Sugar Tesoro Refinery Flixborough

Answers

The incident that taught us the importance of working with our neighbors to inform them and protect them from the risks in our facilities is Bhopal.

Bhopal was an industrial town in central India that became synonymous with the world's worst industrial disaster. A toxic gas leak in a pesticide factory owned by Union Carbide, a US chemical company, killed thousands of people instantly in December 1984. The gases affected hundreds of thousands of people, some of whom were exposed to it for years. It was a horrific tragedy that no one could ever forget. This incident taught us that the health and well-being of communities surrounding chemical facilities are crucial and should be prioritized.

Learn more about  incident here:

https://brainly.com/question/13671781

#SPJ11

Lists Compare By Length Create a public class Comparator that provides a single class method named compare.compare accepts two lists as arguments, and the lists can be any type. To declare a list with any type, we use the type List<?>. compare functions a bit like comparable except that it compares the two passed objects for order. In this case you should return a negative value if the first list is shorter than the second, a positive value if the first list is longer that the second, and zero if they have the same size. If either passed List is null, throw an IllegalArgumentException. You may find the List Javadoc helpful for completing this problem.

Answers

The `Comparator` class provides a `compare` method that compares the lengths of two lists, returning a negative value if the first list is shorter, positive if longer, and zero if they have the same size.

Here's an example implementation of the `Comparator` class that compares the lengths of two lists:

```java

import java.util.Comparator;

import java.util.List;

public class ListLengthComparator implements Comparator<List<?>> {

   public static int compare(List<?> list1, List<?> list2) {

       if (list1 == null || list2 == null) {

           throw new IllegalArgumentException("Lists cannot be null");

       }

       int sizeComparison = Integer.compare(list1.size(), list2.size());

       if (sizeComparison != 0) {

           return sizeComparison;

       } else {

           return 0;

       }

   }

}

```

In this implementation, the `compare` method takes two lists as arguments (`List<?> list1` and `List<?> list2`). It first checks if either of the lists is null and throws an `IllegalArgumentException` in such cases.

Next, it compares the sizes of the two lists using `Integer.compare(list1.size(), list2.size())`. If the first list is shorter, it returns a negative value. If the first list is longer, it returns a positive value. If the lists have the same size, it returns 0.

You can use this `ListLengthComparator` class to compare the lengths of different lists. For example:

```java

import java.util.ArrayList;

import java.util.List;

public class Main {

  public static void main(String[] args) {

       List<Integer> list1 = new ArrayList<>();

       list1.add(1);

       list1.add(2);

       list1.add(3);

       List<String> list2 = new ArrayList<>();

       list2.add("a");

       list2.add("b");

       list2.add("c");

       int comparisonResult = ListLengthComparator.compare(list1, list2);

       System.out.println("Comparison result: " + comparisonResult);

   }

}

```

In this example, the `compare` method is used to compare `list1` and `list2`, which have different types (`List<Integer>` and `List<String>`). The result will be a negative value (-1 in this case) because `list1` is shorter than `list2`.

I hope this helps! Let me know if you have any further questions.

Learn more about Comparator here:-

https://brainly.com/question/14908224
#SPJ11

The electric field of a plane wave propagating in a nonmagnetic medium is given by E- 25e-30x cos(2n × 109t-40x) (V/m). Obtain the corresponding expression for H.

Answers

As per the data given, the corresponding expression for H is H = (25 / 377) [tex]e^{(-30x)[/tex] cos(2π × [tex]10^{9t[/tex] - 40x) (A/m).

The relationship between the magnetic field (H) and the electric field (E) in a plane wave in a non-magnetic medium is given by:

H = (1 / η) × E

η = sqrt(μ₀ / ε₀)

η = sqrt((4π ×[tex]10^{(-7)[/tex] T·m/A) / (8.854 × [tex]10^{(-12)[/tex] C²/N·m²))

η ≈ 377 Ω

Now,

H = (1 / η) × E

H = (1 / 377) × [tex]25e^{(-30x)[/tex] cos(2π × [tex]10^{9t[/tex] - 40x)

H = (25 / 377)  [tex]e^{(-30x)[/tex] cos(2π ×  [tex]10^{9t[/tex] - 40x)

Therefore, the corresponding expression for H is H = (25 / 377) [tex]e^{(-30x)[/tex] cos(2π × [tex]10^{9t[/tex] - 40x) (A/m).

For more details regarding expressions, visit:

https://brainly.com/question/28170201

#SPJ4

A 57-tooth spur gear is in mesh with a 23- tooth pinion. The pd = 6 and the ? = 25°. The gearset transmits 125hp at 1000 pinion rpm. Find the torque on a) the pinion shaft and b) the gear shaft.

Answers

The torque on the pinion shaft is 22,915 in-lb and the torque on the gear shaft is 634,585 in-lb. is the answer.

Let Tp be the torque on the pinion shaft and Tg be the torque on the gear shaft. The equation for torque is T = (hp × 5252)/rpm.

Here, pd = 6 and the pressure angle, ϕ = 25°.We know that: Tp/Tg = dₓ/dₓP = ZP/Z ...(1)

Tp + Tg = HP × 5252/ωP = (125 × 5252)/1000 = 657,500 in-lb ...(2)

Since the gearset is transmitting 125 hp at 1000 rpm, we can calculate the pitch line velocity of the gearset as Vₓ = πdₓN/12 = π × 6 × 1000/12 = 157.1 ft/min.

We know that:Tp = (HP × 5252 × dₓ)/(rpm × ZP × YP × K) ...(3).

Substituting equation (3) in equation (1), we get:Tp/Tg = ZP/ZG ...(4).

From equation (2), we get:Tg = (657,500 - Tp) in-lb ...(5).

We know that:dₓ = pd × Z ...(6).

We also know that:K = [(sin ϕ + cos ϕ)/2] ...(7)

We know that:YP = 0.154 - 0.9129/pd + 2.8977/pd² - 3.3378/pd³ ...(8).

Substituting equation (6) and (7) in equation (3), we get: Tp = (HP × 5252 × pd × ZP)/(rpm × (sin ϕ + cos ϕ)/2 × YP) ...(9).

Substituting equation (9) in equation (4), we get:(HP × 5252 × pd × ZP)/(rpm × (sin ϕ + cos ϕ)/2 × YP) / Tg = ZP/ZG ...(10).

Substituting equation (5) in equation (10), we get:(HP × 5252 × pd × ZP)/(rpm × (sin ϕ + cos ϕ)/2 × YP) / (657,500 - Tp) = ZP/ZG ...(11).

Solving equation (11) for Tp and Tg, we get:Tp = 22,915 in-lb Tg = 634,585 in-lb.

Therefore, the torque on the pinion shaft is 22,915 in-lb and the torque on the gear shaft is 634,585 in-lb.

know more about torque

https://brainly.com/question/31323759

#SPJ11

sketch a schematic of a mosfet based single quadrant amplifier for a dc motor

Answers

I'm sorry, but I am unable to generate visual content or sketches as a text-based AI model. However, I can describe the schematic of a MOSFET-based single quadrant amplifier for a DC motor.

A MOSFET-based single quadrant amplifier for a DC motor typically consists of a power MOSFET, a gate driver circuit, and the DC motor itself.

The power MOSFET acts as the main amplifier component for controlling the motor's speed and direction. The gate driver circuit is responsible for providing the necessary voltage and current to drive the MOSFET.

In the schematic, the MOSFET is connected in a common source configuration, with the source terminal connected to the ground and the drain terminal connected to one terminal of the DC motor. The other terminal of the DC motor is connected to a DC power supply. The gate terminal of the MOSFET is connected to the output of the gate driver circuit.

know more about MOSFET here:

https://brainly.com/question/17417801

#SPJ11

4. an electrician is running imc (intermediate metal conduit) and the pipe is resting against the plumber’s copper pipe. are these two dissimilar metals allowed to touch each other per the code book?

Answers

According to the National Electrical Code (NEC), dissimilar metals are generally not allowed to come into direct contact with each other.

The reason behind this is to prevent galvanic corrosion, which can occur when two different metals come in contact and are exposed to an electrolyte, such as moisture.

In the case you mentioned, where an electrician is running IMC (intermediate metal conduit) and the pipe is resting against the plumber's copper pipe, it is advisable to provide some form of separation or insulation between the two pipes. This can be achieved by using insulating bushings or sleeves made of materials that prevent direct contact between the dissimilar metals.

Know more about National Electrical Code here:

https://brainly.com/question/17215290

#SPJ11

A home with 8’ ceilings measure 42” x 30” the areas of the window and the door openings are approximately 125 ft.². What’s the total wall area that needs to be insulated

Answers

The total wall area that needs to be insulated is -29 ft².

The negative value indicates that the area of the window and door openings exceeds the total wall area, which seems unlikely. It's important to note that the given dimensions or calculations might contain errors or inconsistencies. Double-checking the measurements or obtaining accurate dimensions will be necessary to provide a valid answer.

To determine the total wall area that needs to be insulated, we first need to calculate the area of the window and door openings and subtract it from the total wall area.

The dimensions of the window and door openings are not provided, but we know that their combined area is approximately 125 ft². Let's assume that the window and door openings are rectangular in shape.

Let's calculate the area of the window and door openings:

Area = Length × Width

Given that the combined area is 125 ft², we can assume:

Area of window and door openings = 125 ft²

Now, let's calculate the total wall area that needs to be insulated:

Total wall area = Wall area - Area of window and door openings

To calculate the wall area, we need to find the perimeter of the home and multiply it by the height of the walls. Assuming the home is rectangular:

Perimeter = 2 × (Length + Width)

Total wall area = Perimeter × Height

Let's substitute the given dimensions into the equations:

Perimeter = 2 × (42" + 30") = 144 inches

Total wall area = (144 inches × 8 feet) / 12 = 96 ft²

Finally, we can calculate the total wall area that needs to be insulated:

Total wall area = 96 ft² - 125 ft² = -29 ft²

The negative value indicates that the area of the window and door openings exceeds the total wall area, which seems unlikely. It's important to note that the given dimensions or calculations might contain errors or inconsistencies. Double-checking the measurements or obtaining accurate dimensions will be necessary to provide a valid answer.

For more such questions on area, click on:

https://brainly.com/question/25292087

#SPJ8

A cylindrical bar of metal having a diameter of 19.9 mm and a length of 186 mm is deformed elastically in tension with a force of 42600 N. Given that the elastic modulus and Poisson's ratio of the metal are 67.1 GPa and 0.34, respectively, determine the following: (a) The amount by which this specimen will elongate (in mm) in the direction of the applied stress. (b) The change in diameter of the specimen (in mm). Indicate an increase in diameter with a positive number and a decrease with a negative number.

Answers

Answer:

a) 0.347 mm

b)  - 0.0126 mm

Explanation:

Diameter of metal bar = 19.9 mm

length = 186 mm = 0.186 m

Tension force = 42600 N

elastic modulus = 67.1 GPa

Poisson's ratio = 0.34

a) calculate the amount by which the specimen will elongate

first calculate the area of metal bar

Area = πd^2 / 4 = π/4 ( 19.9 )^2  = 3.11 * 10^-4 m^2

Elongation ( E ) = б / e = P/A * L / ΔL

and ΔL = PL / AE

hence the elongation ( ΔL) = [ (42600 * 0.186 ) / ( 3.4*10^-4 *  67.1 * 10^9 ) ]

                                            = 3.47 * 10^-4 m ≈ 0.347 mm

b) Calculate the change in diameter of specimen

μ = -( Δd / d) / ( ΔL/L )

0.34 = - (Δd / 19.9 ) / ( 0.347 / 186 )

∴ Δd = 0.34 * 0.00186 * 19.9  = - 0.0126 mm

Which of the following identifies three advantages of PLM software?

reduced cost, faster marketing, and process transparency

faster marketing, process transparency, and outsourcing

process transparency, outsourcing, and reduced cost

outsourcing, reduced cost, and faster marketing

Answers

Answer:

reduced cost, faster marketing, and process transparency

Explanation:

The correct answer is reduced cost, faster marketing, and process transparency. PLM software helps coordinate tasks during implementation.

Reduced cost, faster marketing, and process transparency

create a query which shows order number, amount and date for every order from orders table. save the query as qry4_1.

Answers

The total number of words in this solution is 90 words.

To create a query which shows order number, amount, and date for every order from orders table, we'll follow the steps below:Launch Microsoft Access, create a new query, and save it as qry4_1.From the "Tables" tab on the top left corner, drag the "Orders" table and drop it in the main window area.On the "Design" tab, select "Order ID," "Amount," and "Order Date" from the "Orders" table by checking the boxes next to them to include them in the query.Then click on the "Run" button from the top menu bar or run the query by pressing the "F5" key on your keyboard.After running the query, the data for every order number, amount, and date from the orders table will be displayed.This is how you can create a query which shows order number, amount, and date for every order from orders table. The total number of words in this solution is 90 words.

To know more about Microsoft access,

https://brainly.com/question/24643423

#SPJ11

Q-) please give me a reference about Tack coat? Pleae i need it please??!!

Answers

Answer:

Tack coat is a sprayed application of an asphalt binder upon an existing asphalt or Portland cement concrete pavement prior to an overlay, or between layers of new asphalt concrete.

Explanation:

A primary runway is being designed for a new airport to serve airport approach category B. As part of this work it is required to design two consecutive vertical curves (a crest vertical curve followed by a sag vertical curve) to be located midway along the length of the runway. The design should satisfy all the grade and minimum length requirements. If conditions are such that the crest vertical curve connects grades of +0.5% and + 1.5%, determine all the properties of both curves that will be necessary to set out the curves. The elevation and station of the point of intersection of the two tangents of the crest vertical curve are 556.50 ft and 595 + 45.00, respectively, and the distance between the points of intersections (PVIs) of the vertical curves is 975 ft.

Answers

To design two consecutive vertical curves (a crest vertical curve followed by a sag vertical curve) located midway along the length of the runway satisfying all the grade and minimum length requirements, the properties of both curves that will be necessary to set out the curves are:

Length of the crest curve (Lc) = 50.63 feet.

Length of the sag curve (Ls) = 2531.25 feet.

Minimum length of the sag curve (Lsm) = 190.43125 feet.

So, there are a few properties of curves that are important in a runway design. Some of the significant properties of curves are:

Curvature Radius: The Curvature radius is the radius of the circle that lies on the inside edge of the curve.

Super-elevation: The angle at which a curve is banked is called super-elevation.

Longitudinal gradient: The slope of the curve is defined by its longitudinal gradient.

Setting out the Curves: Let's try to determine all the properties of both curves that will be necessary to set out the curves. To design two consecutive vertical curves that will be located midway along the length of the runway, we need to follow some steps:

1. We need to determine the distance between the PVIs of the vertical curves, which is 975 ft.

2. Determine the station of the VPIs (Vertical Point of Intersection) of each curve.

For the crest vertical curve, the station is 595 + 45.00.

3. Find the grade at the VPI of the crest vertical curve. The grade at the VPI of the crest vertical curve is the average of the grades between the PVI of the sag curve and the PVI of the crest curve.

Therefore, the grade is: Gc = (Gs + Gp) / 2 where Gs = 0.5% and Gp = 1.5%.

Hence Gc = (0.5% + 1.5%) / 2 = 1%.

4. The vertical distance between the VPI of the crest curve and the VPI of the sag curve is defined as "y."

5. The elevation of the VPI of the crest vertical curve is given as 556.50 ft.

Hence, the elevation of the VPI of the sag curve will be 556.50 + y.

6. The station of the VPI of the sag vertical curve can be calculated by subtracting half of the distance between the PVIs (975/2) from the station of the VPI of the crest curve (595+45.00).

Hence the station of the VPI of the sag curve is 595+45.00-487.50 = 153+45.00.

7. The length of the crest curve (Lc) and sag curve (Ls) can be found using the equation:

Lc = 1.25 y / GcLs = 1.25 y / Gs8.

Finally, we can calculate the required minimum length of the sag curve (Lsm) by using the following equation:

Lsm = (Gs + Gc) Ls / 2 Gc

Solved Numericals:

Length of Crest Curve Lc = 1.25 y / Gc = 1.25 × 40.5 / 1% = 50.63 feet.

Length of Sag Curve Ls = 1.25 y / Gs = 1.25 × 40.5 / 0.5% = 2531.25 feet.

Minimum length of Sag Curve Lsm = (Gs + Gc) Ls / 2 Gc= (0.5% + 1%) × 2531.25 / (2 × 1%)= 38,086.25/200 = 190.43125 feet.

Thus the properties of both curves that will be necessary to set out the curves are as follows:

Length of the crest curve (Lc) = 50.63 feet.

Length of the sag curve (Ls) = 2531.25 feet.

Minimum length of the sag curve (Lsm) = 190.43125 feet.

Learn more about vertical curves:

brainly.com/question/31493952

#SPJ11

Other Questions
The are the primary organs of the lower respiratory system. branch(es) into the lungs, allowing for the maximum amount of space for oxygen to be moved into the blood.The is the fluid-filled space that surrounds the lungs. 3. Which of the following is an example of alliteration?a) The scarlet coat was very warm.b) As the wind whispered in the treetops, the leaves whirled to the ground.c) Tariq is a very smart young man.d) What is the name of the new band that Brianna and Yvanna joined? you purchase a bond with a coupon rate of 7.9 percent, a par value of $1,000, semiannual coupons, and a clean price of $895. if the next coupon payment is due in two months, what is the invoice price? Which of the following balances has the least uncertainty? (PSS.1)Group of answer choicesplatform balance, +/- 0.1 ganalytical balance, +/- 0.0001 gAll balances have the same uncertaintytriple-beam balance, +/- 0.01 gelectronic balance, +/- 0.001 g Given a random sample size of n = 900 from a binomial probability distribution with P = 0.30. a. Find the probability that the number of successes is greater than 310.P(X 310) = _____ (round to four decimal places as needed and show work)b. Find the probability that the number of successes is fewer than 250.P(X 250) = _____ (round to four decimal places as needed and show work) what's the distance between theses two. (-5, 1) (2, 4) Inside a seed the new sporophyte is a(n)A. Embryo. B. Cotyledon. C. Pollen. D. Endosperm Which of the following steps happens first during transcription?A. RNA polymerase reaches the end of the gene.B. RNA polymerase reaches the beginning of a gene.C. RNA polymerase pulls apart the double helix.D. RNA polymerase produces mRNA from DNA. Let k be a constant and consider the function f(x,y,z) = kx? - kry + y2 -2yz - 22. (Thus, for example, if k = 4, then f(xy.z) = 4x2 - 4xy + 2y2-2yz -22) For what values (if any) of the constant k does / have a (nondegenerate) local maximum at (0.0.0)? For what values of k does / have a (nondegenerate) local minimum at (0.0.0)? Be sure to explain your reasoning. 15. The cost of an article including 15% for taxes is$138.00. What is the cost of the article withouttaxes? Montresor says:T!True-true," I replied; "and, indeed, I had no intention of alarming you unnecessarily;but you should use proper caution. A draft from this Medoc will defend us from thedamps."What word or words in this passage suggest danger?A.unnecessarilyB.use all proper cautionC.indeedD.one of the above how does wifredo lam, being of mixed-heritage, refer to heritage, race and/or religion? Valentina is single and claims no dependents. Assume that Valentina has only one job or that step 2 of Form W-4 is not checked. Use the Wage Bracket Method Tables for Manual Payroll Systems with Forms W-4 from 2020 or Later available online in Publication 15, Publication 15-T, "Federal Income Tax Withholding Methods." Use the appropriate wage bracket tables for a manual payroll systems. Required: a. If Valentina is paid weekly and her annual wages are $87,360, what is the amount of withholding per paycheck? b. If Valentina is paid monthly with annual wages of $77,280, what is the amount of withholding per paycheck? Amniotic egg is an egg that contains a f fluid-filled nucleus and a yolk sac True or FalsePLS HELP THIS IS FROM A UNIT TESTscience 30 points pls help Answer this question to get marked as barinliest!!!! The radius of a circle is 8 inches. What is the area?r=8 inGive the exact answer in simplest form. Which comparison is not correct?-2 > -71 < -9-3 > -86 > 5 An engineer stands 50 feet away from a building with a surveying device mounted on a tripod. ifthe surveying device is 5 feet above the ground and the angle of elevation is 50, find how tall isthe building. What was paramount to survival of colonial Americans?LivestockLandWaterFamilies Hydrogen peroxide and water both contain the same two elements. Write their chemical formulas. Compare and contrast their properties. Explain the importance of writing correct chemical formulas