Consider the reaction in chemical equilibrium.

COCl₂(g) <—> CO(g) + Cl₂(g)

Which is the correct equation for K?
O K= [COCI₂]²/[CO][Cl₂]

O K= [COCl₂]/[CO][Cl₂]

O K= [CO][Cl₂]/[CoCl₂]

O K= [CO][Cl₂]/[COCI₂]²

So a buffer system containing 0.140 M sodium cyanide (NaCN) and 0.17 M hydrocyanic acid (HCN) has a pH of 9.13. Note: -You must become familiar with and comprehend the idea of equilibrium and buffer solutions in order to answer questions of this nature.

For HCN, 6.2 x 1010 is the acid dissociation constant. Hydronium ion in solution is therefore 1,4 x 106 M concentrated. A 0.003 M HCN solution has a pH of 5.90 and a pOH of 8.10 as a result. Known as HCN, hydrogen cyanide is a weak acid that splits into H+ and CN- in solution. HCN is a gas that is exceedingly hazardous, hence it is never utilised as a source of CN ions. The alternative is frequently sodium or potassium cyanide (KCN or NaCN).

To know more about sodium cyanide, click here:

https://brainly.com/question/30463329

#SPJ4

The species present in the weak acid solution before the titration starts are HA, H+ (H3O+), A-, and H2O.

Before the titration starts, the weak acid solution contains HA (the weak acid) and some H+ (or H3O+) ions due to the dissociation of the weak acid in water. There may also be some undissociated HA molecules present. A- is the conjugate base of the weak acid, which is formed when the weak acid donates a hydrogen ion (H+) to the solution. It carries a negative charge (anion) and is usually present in small amounts compared to the undissociated HA molecules. Additionally, there could be some water molecules (H2O) present in the solution.

No species of the strong base, such as Na+ or OH-, are present in the solution before the titration begins.

To know more about Weak Acids:

https://brainly.com/question/15726034

#SPJ11

To prepare the desired compound using the Diels-Alder reaction, you can follow two different ways:

1. First Method: Utilize a diene (a molecule with two double bonds separated by a single bond) and a dienophile (an electron-deficient alkene or alkyne) that are suitable for the desired product. Combine these reactants under appropriate reaction conditions to achieve the cyclohexene ring system characteristic of the Diels-Alder reaction.

2. Second Method: Employ an intramolecular Diels-Alder reaction by designing a molecule containing both the diene and dienophile within the same structure. In this case, the reaction will occur within the molecule, leading to a cyclic product.

The preferred method depends on factors such as reaction conditions, availability of reactants, and desired yield. Generally, the intramolecular Diels-Alder reaction (second method) is preferred due to its increased regioselectivity and stereocontrol, which can lead to higher yields and more specific products. However, it may require more complex starting materials. The choice ultimately depends on the specific target compound and the chemist's preferences.

To know more about Diels-Alder reaction click here:

https://brainly.com/question/29972519

#SPJ11

The value of ΔG° for the reaction 2Cl(g) ⇌ Cl2(g) at 913 K is approximately -161.4 kJ/mol.

To calculate the value of ΔG° in kJ for the reaction 2Cl(g) ⇌ Cl_{2} (g) at 913 K, given that the equilibrium constant, Kp, is 6.32 x [tex]10^{29}[/tex], we can follow these steps:

Step 1: Use the formula ΔG° = -RT ln(Kp) to calculate ΔG°, where R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and Kp is the equilibrium constant.

Step 2: Convert R to kJ/mol·K by dividing by 1000, so R = 0.008314 kJ/mol·K.

Step 3: Plug in the values into the formula: ΔG° = - (0.008314 kJ/mol·K) × (913 K) × ln(6.32 x [tex]10^{29}[/tex]).

Step 4: Calculate ΔG°, which equals - (0.008314 kJ/mol·K) × (913 K) × ln(6.32 x [tex]10^{29}[/tex]) ≈ -161.4 kJ/mol.

Therefore, the value of ΔG° for the reaction 2Cl(g) ⇌Cl_{2}  (g) at 913 K is approximately -161.4 kJ/mol.

Note that the negative sign indicates that the reaction is spontaneous in the forward direction at this temperature.

To know more about Gibbs Energy:

https://brainly.com/question/31488434

#SPJ11

a. The number of moles of OH- used is 0.04102 mol.

b. The number of moles of H+ in the solid acid is also 0.04102 mol. c. The equivalent mass of the unknown acid is 8.26 g/eq.

a. To determine the number of moles of OH- used, we need to use the formula:

moles of OH- = volume of NaOH x molarity of NaOH

where the volume of NaOH used is 41.02 mL or 0.04102 L (remember to convert mL to L), and the molarity of NaOH is known as it is standardized. Therefore, the number of moles of OH- used is:

moles of OH- = 0.04102 L x 0.1 mol/L = 0.004102 mol

b. Since the acid is neutralized by the same number of moles of OH-, the number of moles of H+ in the acid is also 0.004102 mol.

c. The equivalent mass of an acid is the mass of the acid that can donate one mole of H+ ions. It is calculated by dividing the molar mass of the acid by its acidity (or basicity) in equivalents. To find the acidity of the acid, we can use the formula:

acidity = moles of H+ / moles of acid

where the moles of H+ is 0.004102 mol (from part b) and the moles of acid can be calculated using the acid's molecular weight:

moles of acid = mass of acid / molecular weight

where the mass of the acid is given as 0.3389 g and the molecular weight is unknown. However, we can use the balanced chemical equation for the neutralization reaction to determine the molecular weight. Assuming the acid is monoprotic, the balanced equation is:

HX + NaOH → NaX + H₂O

where HX represents the acid. The equation shows that one mole of HX reacts with one mole of NaOH, which means that the molecular weight of HX is equal to the molar mass of NaOH, which is 40.00 g/mol. Therefore, the moles of acid is:

moles of acid = 0.3389 g / 40.00 g/mol = 0.0084725 mol

Now we can calculate the acidity:

acidity = 0.004102 mol / 0.0084725 mol = 0.484

Finally, the equivalent mass of the acid is:

equivalent mass = molecular weight / acidity

equivalent mass = (0.3389 g / 0.0084725 mol) / 0.484 = 8.26 g/eq.

learn more about molarity here:

https://brainly.com/question/8732513

#SPJ11

The dehydration of alpha-terpineol to alpha-pinene is a complex reaction that involves several intermediates.

The first step is the protonation of the hydroxyl group in alpha-terpineol, which is catalyzed by an acid catalyst. This step generates a carbocation intermediate, which is stabilized by the adjacent double bond in the terpene structure.

The carbocation intermediate undergoes a series of rearrangements, leading to the formation of a more stable carbocation species. In the case of alpha-terpineol, the carbocation undergoes a 1,2-methyl shift, resulting in the formation of a secondary carbocation. This carbocation then undergoes a second 1,2-methyl shift, leading to the formation of a tertiary carbocation.

The final step in the mechanism is the elimination of a proton from the tertiary carbocation, resulting in the formation of alpha-pinene. This reaction is facilitated by a base catalyst, which removes the proton and promotes the elimination of a molecule of water.

Overall, the mechanism of the dehydration of alpha-terpineol to alpha-pinene is a multistep process that involves the formation of several intermediates. The reaction requires the presence of both an acid and a base catalyst to facilitate the protonation and deprotonation steps.

For more about dehydration:

https://brainly.com/question/16394592

#SPJ11

while 1 mole of atoms of any element will always contain the same number of atoms as 1 mole of atoms of any other element, the mass, number of protons, volume, and density of these samples will not be the same due to the unique properties of each element.

How to solve the question?

Comparing 1 mole of atoms of any element to 1 mole of atoms of any other element would lead to the conclusion that both samples have the same number of atoms. This is because one mole of any substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23 atoms. Thus, 1 mole of any element will always contain the same number of atoms as 1 mole of any other element.

However, the mass of 1 mole of atoms of different elements will not be the same. This is because the mass of an atom is determined by its atomic mass, which is the sum of the masses of its protons, neutrons, and electrons. Different elements have different atomic masses, which means that the mass of 1 mole of atoms of one element will be different from the mass of 1 mole of atoms of another element.

Similarly, the number of protons, the volume, and the density of 1 mole of atoms of different elements will not be the same. Each element has a unique number of protons in its nucleus, which gives it a unique atomic number. The volume of 1 mole of atoms of different elements will also vary depending on the size of the atoms and their packing density. Finally, the density of 1 mole of atoms of different elements will depend on the mass of the atoms and the volume they occupy.

In summary, while 1 mole of atoms of any element will always contain the same number of atoms as 1 mole of atoms of any other element, the mass, number of protons, volume, and density of these samples will not be the same due to the unique properties of each element.

To know more about atoms visit :-

https://brainly.com/question/17545314

#SPJ1

The concentration of [Mg²⁺] in the solution is approximately 5.92×10⁻⁵ M.

To find the concentration of [Mg²⁺] in the solution, we need to use the solubility product constant (Ksp) for magnesium carbonate (MgCO₃). The Ksp at 25°C is 3.50×10⁻⁸.

First, we can write the balanced chemical equation for the dissolution of MgCO₃:

MgCO₃(s) ⇌ Mg²⁺(aq) + CO₃²⁻(aq)

Since the Ksp = [Mg²⁺][CO₃²⁻], and the stoichiometry of the reaction is 1:1, we can assume that the concentrations of Mg²⁺ and CO₃²⁻ are equal in the solution. Let the concentration of Mg²⁺ be x.

Ksp = (x)(x) = x²

Now, we can solve for x:

x² = 3.50×10⁻⁸
x = √(3.50×10⁻⁸) ≈ 5.92×10⁻⁵ M

So, the concentration of [Mg²⁺] in the solution is approximately 5.92×10⁻⁵ M.

To learn more about stoichiometry, refer below:

https://brainly.com/question/30215297

#SPJ11

To calculate the ΔG°' at 37°C for the reaction glucose-6-phosphate to fructose-6-phosphate with Keq = 0.517, use the formula:

ΔG°' = -RT ln(Keq)

Where ΔG°' is the standard Gibbs free energy change, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (37°C = 310.15K), and ln(Keq) is the natural logarithm of the equilibrium constant.

1. Convert temperature to Kelvin: 37°C + 273.15 = 310.15K
2. Calculate the natural logarithm of Keq: ln(0.517) = -0.659
3. Plug the values into the formula: ΔG°' = - (8.314 J/mol·K) × (310.15K) × (-0.659)
4. Calculate the result: ΔG°' ≈ 1,700 J/mol

The ΔG°' for the reaction at 37°C is approximately 1,700 J/mol.

To know more about Gibbs free energy click on below link:

https://brainly.com/question/13318988#

#SPJ11

1. The enthalpy of reactant is 80 KJ

2. The enthalpy of product is 160 KJ

3. The activaition energy for the reaction is 160 KJ

4. The heat of reaction is 80 KJ

5. The forward reaction is endothermic

6. The addition of catalyst will lower the activation energy

7. The enthalpy of reactant is less than the enthalpy of product

8. False

9. False

10. False

The enthalpy of reactants defines the energy of the reactants while the enthalpy of products defines the energy of product.

From the diagram given, we obtained the following

The activation energy for the reaction can be obtain as follow:

Activation energy = Peak energy - Energy of reactant

Activation energy = 240 - 80

Activation energy = 160 KJ

The heat of reaction can be obtain as follow:

Heat of reaction = Enthalpy of products - Enthalpy of reactants

Heat of reaction = 160 - 80

Heat of reaction = 80 KJ

The heat of reaction obtained above is positive (i.e 80 KJ).

Thus, we can conclude that the forward reaction is endothermic reaction.

A catalyst is a substance which alters the rate of a reaction. Catalyst tends to lower the activation energy of a reaction, thereby enhacing the reaction rate.

However, we must take note of the following:

From the diagram above, we obtain:

We can see that the enthalpy of the reactant is less than that of the products.

Learn more about activation energy:

https://brainly.com/question/29060218

#SPJ1

the mole fraction of K_2s in a solution that is 18% mass K_2s is 0.0228 or 2.28%.

To find the mole fraction of K_2s in a solution that is 18% mass K_2s, we need to first convert the mass percentage to mole fraction.

Let's assume we have 100 grams of the solution. Since it is 18% mass K_2s, we have 18 grams of K_2s.

To find the moles of K_2s, we need to divide the mass by the molar mass. The molar mass of K_2s is 174.27 g/mol.

So, moles of K_2s = 18 g / 174.27 g/mol = 0.1034 mol

Now, let's find the moles of the solvent (assuming it is water) using the total mass of the solution.

Moles of solvent = (100 g - 18 g) / 18.02 g/mol = 4.436 mol

The total moles of solute and solvent in the solution is:

Total moles = moles of K_2s + moles of solvent = 0.1034 mol + 4.436 mol = 4.5394 mol

Finally, we can find the mole fraction of K_2s:

Mole fraction of K_2s = moles of K_2s / total moles = 0.1034 mol / 4.5394 mol = 0.0228 or 2.28% (rounded to two decimal places)

Therefore, the mole fraction of K_2s in a solution that is 18% mass K_2s is 0.0228 or 2.28%.

Visit here to learn more about mole fraction  : https://brainly.com/question/29808190
#SPJ11

The Ka of carbonic acid solution is c) 4.4 * 10^-7.

To find the Ka of carbonic acid solution when 0.000066 moles of a 0.01 M solution dissociates, you can use the formula for Ka:
Ka = ([H+][A-]) / [HA]

Given the moles of carbonic acid that dissociate (0.000066 moles), you can calculate the concentrations of the products and the remaining carbonic acid:
[H+] = [A-] = 0.000066 moles / total volume
[HA] = 0.01 M - 0.000066 moles / total volume

Since total volume is constant for all concentrations, we can use ratios to find Ka:
Ka = (0.000066)^2 / (0.01 - 0.000066)

Now, calculate the Ka:
Ka = (0.000066 * 0.000066) / (0.01 - 0.000066) = 4.356 * 10^-9 / 0.009934 = 4.38 * 10^-7

Thus, the Ka of carbonic acid is 4.38 * 10^-7 (approximately), which is closest to option c) 4.4 * 10^-7.

To learn more about "carbonic acid", visit: https://brainly.com/question/27945587

#SPJ11

The [OH⁻] at 25°C for a solution having a pH of 5.65 is 4.47 × 10⁻⁹ M.

To calculate the [OH⁻] at 25°C for a solution having a pH of 5.65, you can use the following relationship:

pH + pOH = 14

First, you need to determine the pOH:

pOH = 14 - pH

= 14 - 5.65

= 8.35

Next, use the relationship between pOH and [OH⁻]:

pOH = -log10[OH⁻]

Now, solve for [OH⁻]:

[OH⁻] = 10^(-pOH) = 10^(-8.35)

≈ 4.47 × 10⁻⁹ M

So, the concentration of hydroxide ions [OH⁻] in the solution at 25°C with a pH of 5.65 is approximately 4.47 × 10⁻⁹ M.

Learn more about hydroxide ions [OH⁻]: https://brainly.com/question/14619642

#SPJ11

(a) The pH of a mixture that is 0.150 M in HF and 0.100 M in HClO is 2.14.

(b) The ClO⁻ concentration of the above mixture of HF and HClO is 0.0928 M.

1. To calculate the concentration of H₃O⁺ ions in the solution using the given x value: 0.0072 M.

2.To  Calculate the pH using the formula: pH = -log[H₃O⁺]. Here, pH = -log(0.0072) = 2.14.

3. Since HClO is a weak acid, use the initial concentration of HClO (0.100 M) and subtract the x value (0.0072 M) to find the concentration of ClO⁻ ions: 0.100 - 0.0072 = 0.0928 M.

To know more about pH click on below link:

https://brainly.com/question/2288405#

#SPJ11

In the given reaction, aluminum is the species that underwent oxidation in this reaction.

An oxidation reaction is a chemical reaction in which one or more electrons are lost from a molecule, atom or ion.

This can result in an increase in the oxidation state or oxidation number of the species undergoing oxidation.

Oxidation reactions are always accompanied by reduction reactions, in which another species gains one or more electrons, leading to a decrease in its oxidation state.

In the given reaction:

[tex]2Al + 3Cu_2+ ---- > 2Al_3+ + 3Cu[/tex]

Aluminum (Al) is being oxidized from its elemental form to its +3 oxidation state, while copper (Cu) is being reduced from its +2 oxidation state to its elemental form.

Therefore, aluminum is the species that was oxidized in this reaction.

For more details regarding oxidation, visit:

https://brainly.com/question/19528268

#SPJ1

For reactions A and D, Kc is expected to be less than 1 (Kc < 1) due to the presence of weak acids and bases on both sides of the equilibrium, while for reactions B and C, Kc is expected to be greater than 1 (Kc > 1) due to the presence of a strong acid driving the formation of weak acids.

A. H₂PO₄⁻ + F- ↔ HPO₄²⁻ + HF

The reaction involves the transfer of a proton (H+) from a weak acid (H₂PO₄⁻) to a weak base (F-) to form its conjugate acid (HPO42-) and conjugate base (HF). Since both the acid and base are weak, the equilibrium position is likely to favor the side with weaker acids and bases.

As a result, the concentration of reactants (H₂PO₄⁻- and F-) at equilibrium is expected to be higher than the concentration of products (HPO₄²⁻ and HF), leading to Kc < 1.

B. CH3COO⁻ + HSO₄- ↔ CH₃COOH + SO₄²⁻

This reaction involves a weak acid (CH₃COOH) and its conjugate base (CH₃COO-) reacting with a strong acid (HSO₄⁻) and forming a weak acid (CH3COOH) and a strong base (SO₄²⁻). Since the strong acid (HSO4-) drives the formation of a weak acid (CH₃COOH), the equilibrium position is likely to favor the formation of products (CH₃COOH and SO₄²⁻), leading to Kc > 1.

C. (CH₃)₂-NH + HCl ↔

This reaction involves a weak base ((CH₃)₂-NH) reacting with a strong acid (HCl) to form its conjugate acid ((CH₃)₂-NH₂⁺) and chloride ions (Cl-). Since the strong acid (HCl) drives the formation of the conjugate acid, the equilibrium position is likely to favor the formation of products ((CH₃)²⁻ NH₂⁺ and Cl⁻), leading to Kc > 1.

D. H-C=C-H + NH₃ ↔

This reaction involves a weak acid (H-C=C-H) reacting with a weak base (NH₃) to form a conjugate acid (H₂N-C=C-H) and a conjugate base (NH₂⁻). Since both the acid and base are weak, the equilibrium position is likely to favor the side with weaker acids and bases. As a result, the concentration of reactants (H-C=C-H and NH₃) at equilibrium is expected to be higher than the concentration of products (H₂N-C=C-H and NH₂⁻), leading to Kc < 1.

You can learn more about acids and bases at: brainly.com/question/31434755

#SPJ11

In the oxidation reaction of benzoin to benzil by ammonium nitrate, N₂(g) is formed via a radical mechanism involving NO₂ and HONO radicals, leading to N₂O₃, which then decomposes to N₂ and O₂.

1. Ammonium nitrate (NH₄NO₃) dissociates into NH₄⁺ and NO₃⁻ ions.
2. The NO₃⁻ ion undergoes homolytic cleavage, generating a NO₂ radical and O atom.
3. The O atom reacts with an NO₂ radical to form an HONO radical.
4. Another NO₂ radical reacts with the HONO radical to form N₂O₃ (dinitrogen trioxide).
5. N₂O₃ decomposes into N₂(g) (nitrogen gas) and O₂(g) (oxygen gas).

This mechanism demonstrates the formation of N₂(g) in the oxidation reaction of benzoin to benzil by ammonium nitrate.

To know more about oxidation reaction click on below link:

https://brainly.com/question/2525090#

#SPJ11

The correct answer is option 5. A precipitate will form because Q < Ksp, meaning the solution is unsaturated and the concentration of Ag+ and Cl- ions will increase until they reach the equilibrium concentrations given by Ksp.

To solve this problem, you need to calculate the reaction quotient Q and compare it with the solubility product constant Ksp. The reaction involved is:

AgNO3 (aq) + CaCl2 (aq) → AgCl (s) + Ca(NO3)2 (aq)

The equilibrium expression for this reaction is:

Ksp = [Ag+][Cl-] = 1.6 x [tex]10^-^1^0[/tex]

The concentrations of Ag+ and Cl- ions in the solution are given by:

[Ag+] = 1.0 x [tex]10^-^6[/tex] M

[Cl-] = 2 x [CaCl2] = 2 x 1.0 x [tex]10^-^4[/tex] M = 2 x [tex]10^-^4[/tex] M

Therefore, the reaction quotient Q is:

Q = [Ag+][Cl-] = (1.0 x [tex]10^-^6[/tex]) (2 x [tex]10^-^4[/tex]) = 2 x [tex]10^-^1^0[/tex]

Since Q < Ksp, the solution is unsaturated and a precipitate of AgCl will form until the concentration of Ag+ and Cl- ions reach the equilibrium concentrations given by Ksp. Therefore, the correct answer is 5. Q < Ksp and a precipitate will form.

Learn more about Solubility product constant

brainly.com/question/9336042

#SPJ11

The dissociation reaction of diethylamine, which is a weak base with a Kb of 1.3*10⁻³, can be represented as follows: C₄H₁₁N + H₂O ⇌ C₄H₁₀NH₂⁺ + OH⁻ In this reaction, diethylamine (C₄H₁₁N) reacts with water (H₂O) to produce diethyl ammonium ion (C₄H₁₀NH₂⁺) and hydroxide ion (OH⁻). This reaction is an example of a weak base reacting with water to form a conjugate acid and hydroxide ion.

The dissociation reaction of diethylamine is a weak base with a K value of 1.3 x 10⁻³. The dissociation reaction of diethylamine can be represented as follows:

Diethylamine (C₄H₁₁N) + H₂O (l) ⇌ C₄H₁₀NH⁺(aq) + OH⁻ (aq)

In this reaction, diethylamine accepts a proton (H+) from water, forming its conjugate acid (C₄H₁₀NH⁺) and hydroxide ions (OH⁻). Since diethylamine is a weak base, it does not dissociate completely in water, as indicated by its Kb value.

Learn more about the weak base at https://brainly.com/question/31309380

#SPJ11

Acidity increases down and right on the periodic table.

Acidity is determined by the tendency of an acid to donate a proton (H+ ion). The electronegativity and size of the atom that loses the proton play important roles in determining acidity. As we move down a group, the size of the atom increases, which makes it easier for it to lose a proton. This is why acidity increases down the periodic table.

On the other hand, as we move across a period from left to right, the electronegativity of the atom increases, which means that it holds onto its electrons more tightly and is less likely to lose a proton.

However, when we move down and right on the periodic table, we see a combination of both factors: the size of the atom is increasing, making it easier to lose a proton, while the electronegativity is also increasing, making it harder to lose a proton. In general, the size factor wins out and acidity increases down and right on the periodic table.

To know more about "Electronegativity" refer here:

https://brainly.com/question/17762711#

#SPJ11

Acidity increases down and right on the periodic table.

Acidity is determined by the tendency of an acid to donate a proton (H+ ion). The electronegativity and size of the atom that loses the proton play important roles in determining acidity. As we move down a group, the size of the atom increases, which makes it easier for it to lose a proton. This is why acidity increases down the periodic table.

On the other hand, as we move across a period from left to right, the electronegativity of the atom increases, which means that it holds onto its electrons more tightly and is less likely to lose a proton.

However, when we move down and right on the periodic table, we see a combination of both factors: the size of the atom is increasing, making it easier to lose a proton, while the electronegativity is also increasing, making it harder to lose a proton. In general, the size factor wins out and acidity increases down and right on the periodic table.

To know more about "Electronegativity" refer here:

https://brainly.com/question/17762711#

#SPJ11

The atomic mass of an atom is the sum of protons and neutrons. So, the atomic mass of this heavier isotope of atom gi is: 82 atomic mass units (amu).

we know that the heavier isotope of the atom gi has 42 neutrons, which is 2 more than the regular atom. This means that the regular atom has 40 neutrons.

The number of electrons in gi 2 is also given as 40. Since atoms are neutral and have the same number of electrons and protons, we can infer that the number of protons in gi 2 is also 40.

To find the atomic mass of gi 2, we need to add the number of protons and neutrons together.

Atomic mass = number of protons + number of neutrons

Atomic mass of gi 2 = 40 protons + 42 neutrons

Atomic mass of gi 2 = 82

Therefore, the atomic mass of gi 2 is 82.

To learn more about equivalence point click here

brainly.com/question/31375551

#SPJ11

To calculate the pH of a 0.500 M aqueous solution of NH3, we first need to find the concentration of hydroxide ions (OH-) in the solution. NH3 is a weak base, so it reacts with water to produce hydroxide ions

the conjugate acid[tex]NH4+: NH3 + H2O ⇌ NH4+ + OH[/tex]- The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 1.77x10^-5. Using the expression for Kb, we can calculate the concentration of OH-:

[tex]Kb = [NH4+][OH-] / [NH3]1.77x10^-5 = x^2 / (0.500 - x)[/tex]

Assuming x is much smaller than 0.500, we can approximate 0.500 - x to be 0.500, and solve for x:

[tex]x = sqrt(Kb*[NH3]) = sqrt(1.77x10^-5 * 0.500) = 0.00133 M[/tex]

The concentration of OH- in the solution is 0.00133 M, so we can calculate the pH as:

pH = 14 - pOH = 14 - (-log[OH-]) = 11.88

Therefore, the pH of a 0.500 M aqueous solution of NH3 is 11.88.

Learn more about   NH3  here:

https://brainly.com/question/16119085

#SPJ11

Answer:

Chemical formula:

Chemical formulas give information regarding what atoms (and how many of them) make up a compound or ion. On their basis the molar mass of the chemical species is found.

Explanation:

if it helped u please mark me a brainliest :))

The pH of the 0.100 M NH₃ solution is 10.13. Option B is correct.

The dissociation of NH₃ in water is an example of a weak base. To find the pH of the solution, we need to first find the concentration of OH⁻ ions in the solution using the Kb value for NH₃.

The Kb expression for NH₃ is;

Kb = [NH₄⁺][OH⁻] / [NH₃]

We are given that the initial concentration of NH₃ is 0.100 M. At equilibrium, let x be the concentration of OH⁻ ions produced. Then the equilibrium concentrations of NH₄⁺ and NH₃ are also 0.100 M, since they are produced in a 1:1 ratio.

Substituting these values into the Kb expression gives;

1.8 x 10⁻⁵ = (0.100 x) / 0.100

x = [OH⁻] = 1.8 x 10⁻⁶ M

The concentration of OH⁻ ions is then used to find the pH of the solution using the equation;

pH = 14 - pOH

pH = 14 - (-log[OH⁻])

pH = 14 - (-log(1.8 x 10⁻⁶))

pH = 10.13

Hence, B. is the correct option.

To know more about dissociation here

https://brainly.com/question/31145781

#SPJ4

At equilibrium, the concentrations of both products and reactants remain constant, so the [Sn²⁺] will remain 2.0 M.

The reaction is driven by the difference in concentrations between the two half-cells and the reduction potential of the reaction. Since the Pb⁺² concentration is much lower in the left cell, the reaction is driven to the right, where the Sn²⁺ concentration is higher.

This reaction will continue until both sides have equal concentrations, at which point the reaction will reach equilibrium. Since the [Sn²⁺] is higher in the right cell, it will remain at 2.0 M at equilibrium. This is because the reaction is driven by the difference in concentrations and not the absolute value of the concentrations.

Thus, [Sn²⁺] will remain at 2.0 M when the system reaches equilibrium.

know more about equilibrium here

https://brainly.com/question/30807709#

#SPJ11

1.10 V is the EMF of a cell of copper 0.34 and Zinc 0.76. In result of a positive EMF (1.10 V), this reaction drives spontaneously.

An energy transmission to an electric circuit based on a unit of electric charge, expressed in volts, is known as electromotive force (also known as electromotance, abbreviated emf) in electromagnetism and electronics. Electrical transducers are devices that create an emf by transforming non-electrical energy to electrical energy. Batteries, which transform chemical energy, or generators, which transform mechanical energy, both produce an electromagnetic field (emf). In result of a positive EMF (1.10 V), this reaction drives spontaneously

Cu2+ + 2e- → Cu E° = +0.34 V

Zn2+ + 2e- → Zn E° = -0.76 V

EMF = E°(Cu) - E°(Zn)

EMF = 0.34 V - (-0.76 V)

EMF = 1.10 V

To know more about EMF, here:

https://brainly.com/question/24376515

#SPJ1

The indicator that should be added to the base solution with a pH of 6 for titration with an equivalence point near pH 8 is phenolphthalein.

This indicator has a pH range between 8.2 and 10, making it suitable for detecting the equivalence point in this titration.

In a titration, an indicator is used to visually signal the equivalence point, which is when the moles of acid and base are equal, and the solution is neutral. To select the appropriate indicator, it is important to know the pH range of the indicator and the expected pH at the equivalence point.

Phenolphthalein is a commonly used indicator in acid-base titrations. It is colorless in acidic solutions (below pH 8.2) and turns pink in basic solutions (above pH 8.2).

Since the equivalence point in this titration is near pH 8, phenolphthalein is a suitable choice, as it will change color around the desired pH, indicating the endpoint of the titration. Other indicators like bromothymol blue or litmus paper would not work as well in this case, as their pH range does not align with the expected equivalence point.

To know more about equivalence point click on below link:

https://brainly.com/question/31375551#

#SPJ11

Methane and chlorine do not react with strong bases like NaOH when heated above 100°C or made extremely weakly acidic. By giving thorough methods for resolving chemical problems, it seeks to aid students in developing their analytical and problem-solving abilities. Hence (c) is the correct option.

It is discovered that ideal gas calculations can provide a reliable estimate of the loss in mass flow caused by swirl even when applied to real gases. None of these structural MRI abnormalities, nevertheless, appear to be diagnostically significant for CBD. It offers expert recommendations and discusses the real-world applications of the fundamental scientific concepts covered in Volume I.

To know more about Methane, click here:

https://brainly.com/question/2127750

#SPJ4