Copper is low down in the reactivity series and can be obtained from
copper oxide.
Devise a simple method to obtain a sample of copper from copper oxide in
the laboratory.

The molarity of a solution containing 74.6 g of C2H6O in 2.36 L of solution is 0.685 M.

We need to know the number of moles of solute and the volume of the solution in liters.

First, let's calculate the number of moles of C2H6O:

Molar mass of C2H6O = (2 x atomic mass of C) + (6 x atomic mass of H) + (1 x atomic mass of O)

= (2 x 12.01 g/mol) + (6 x 1.01 g/mol) + (1 x 16.00 g/mol)

= 46.07 g/mol

Number of moles of C2H6O = mass of C2H6O / molar mass of C2H6O

= 74.6 g / 46.07 g/mol

= 1.618 moles

Now, let's calculate the molarity of the solution:

Molarity = number of moles of solute / volume of solution in liters

= 1.618 moles / 2.36 L

= 0.685 M

Therefore, the molarity of a solution containing 74.6 g of C2H6O in 2.36 L of solution is 0.685 M.

Learn more about molarity here : brainly.com/question/30404105

#SPJ1

Answer:

Gas pressure= 766.4 mmHg

Explanation:

Gas pressure greater than atmospheric pressure = Atmospheric pressure + height

750.0 mmHg + 26.4 cm = 766.4 mmHg

If the concentration of sodium thiosulfate in the reaction mixture is decreased, then the rate of the reaction will also decrease.

The rate of a chemical reaction is the speed at which reactants are consumed and products are formed in a chemical reaction. It is usually measured as the change in the concentration of reactants or products per unit time.

The concentration of reactants plays a crucial role in determining the rate of a chemical reaction. In general, the rate of a reaction increases with an increase in the concentration of reactants. This is because an increase in the concentration of reactants leads to a higher number of reactant molecules per unit volume, increasing the frequency of successful collisions between reactant molecules. The higher the frequency of collisions, the higher the probability of successful collisions resulting in the formation of products. Therefore, the rate of reaction is directly proportional to the concentration of reactants, according to the rate law of the reaction.

A decrease in the concentration of sodium thiosulfate would mean that fewer sodium thiosulfate molecules are available to react with the hydrochloric acid molecules. Thus, the frequency of successful collisions between reactant molecules will decrease, resulting in a slower rate of reaction.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ9

Concentration of species capable of effective interactions: Ionic Strength

Correction factor applied to concentrations based on the ionic strength of the solution: Activity coefficient.

Coefficient is a numerical or constant quantity that is placed in front of a variable or term. The term "coefficient" comes from the Latin word "coefficiente  which means "a joint or mutual agreement."

In algebra, coefficients are used to represent the relative size or weight of a variable or term. For example, in the expression 3x + 2y, the coefficients are 3 and 2, which indicate that the variable x has a weight of 3 and the variable y has a weight of 2.

To know more about coefficient visit :

https://brainly.com/question/28975079

#SPJ1

This acid is known as sulfurous acid, as it's the conjugate base for base HSO3.

This compound is made up of three different elements: hydrogen, sulfur, & oxygen. According to the molecular formula, there are two hydrogen atoms, one sulfur atom, or three oxygen atoms. The sulfurous acid compound name is H2SO3 H 2 S O 3.

Sulfuric acid is a very corrosive chemical that, when concentrated, can be explosive. It can potentially cause skin burns, irritate the respiratory tract and make breathing difficult if inhaled, burn the eyes but instead possibly cause blindness if swallowed, and burn holes there in stomach if swallowed.

To know more about  sulfurous acid visiit :

https://brainly.com/question/29303579

#SPJ1

1017.5 Joules is the heat released when 25g water is condensed at 100 C.

When water is condensed, it changes from a gas to a liquid, releasing heat in the process. The amount of heat released can be calculated using the formula:

q = m * ΔH

where:

q = heat released (in Joules)

m = mass of water (in grams)

ΔH = heat of vaporization of water (in J/g)

The heat of vaporization of water at 100°C is 40.7 kJ/mol, or 40.7 J/g. Therefore, substituting the values in the formula, we get:

q = 25 g * 40.7 J/g

q = 1017.5 J

So the heat released when 25 g of water is condensed at 100°C is approximately 1017.5 Joules.

To learn more about vaporization problem at

https://brainly.com/question/14578189

https://brainly.com/question/26127294

The new pressure of the gas at a volume of 23 mL is 17.9 atm

The fundamental equation in physics and chemistry, known as the ideal gas law, is crucial in describing the behavior of an ideal gas. This theoretical gas consists of numerous small particles that are constantly moving randomly without any interaction except for perfectly elastic collisions. The ideal gas law establishes a relationship between pressure, volume, temperature, and the number of particles present in an ideal gas. The equation is expressed as PV = nRT.

According to the ideal gas law, the pressure (P), volume (V), and number of moles (n) of a gas are related by the equation:

PV = nRT

where R is the gas constant and T is the absolute temperature of the gas. Assuming that the number of moles of gas and the temperature remain constant during the compression process, we can write:

P1V1 = P2V2

Substituting the given values, we get:

P2 = P1V1/V2 = (1.50 atm)(275 mL)/(23 mL) = 17.9 atm

To know more about Ideal gas law, click here

https://brainly.com/question/28257995

#SPJ1

Step 1: Start with the end in mind - we want to determine the number of moles of gallium chloride.

Step 2: Cancel out the units from step 1 - we can use the balanced equation to convert the volume of the 1.44 M solution of HI to moles of GaCl2. Specifically, we need to use the stoichiometric ratio between HI and GaCl2, which is 6:2 or 3:1. This means that for every 3 moles of HI reacted, 1 mole of GaCl2 is produced.

Step 3: Cancel out the units from step 2 - we can convert the volume of the solution to moles of HI using the concentration (1.44 M).

Step 4: Multiply the top - we can use the following calculation to determine the number of moles of GaCl₂ produced:

(2.6 L) x (1.44 mol/L) x (1 mol GaCl2/3 mol HI) = 1.251 mol GaCl₂

Step 5: Divide the top by the bottom - we don't need to divide anything since we already have the final answer.

Step 6: Write your answer with the correct number of significant figures and correct units - the answer is 1.251 mol of GaCl₂. We should round this to 3 significant figures since the volume given in the problem only has 2 significant figures. So the final answer is 1.25 mol of GaCl₂.

To know more about stoichiometric ratios, visit:

https://brainly.com/question/29841194

#SPJ1

Non-rechargeable batteries, also known as primary batteries, are designed with a limited amount of active materials in their electrodes. Once all the active materials are consumed, the battery cannot be recharged. This is because non-rechargeable batteries have significantly different chemistries than rechargeable batteries, despite both being based on reversible redox reactions.

On the other hand, rechargeable batteries, or secondary batteries, are designed to be recharged because they contain more active materials in their electrodes that can be replenished when the battery is charged. Rechargeable batteries also have additional layers to protect their active materials from degrading during the charge and discharge process.

Therefore, the fundamental difference between non-rechargeable and rechargeable batteries is the amount of active materials contained in the electrodes and their corresponding battery chemistries – which results in the limited use of non-rechargeable batteries.

The information for the equation of the circle is given as follows:

Coordinate F(7,0) -   =8

Coordinate   R(7,-4) = 8
Coordinate   T(11,0) = 8

Where the following equation is given:

(x-9)² + (y+2)² = 8

If Coordinate   F(7,0)

Substituting we have:

(7-9)² + (0+2)² = 8

(-2)²+ (2)² = 8

4 + 4 = 8

If Coordinate  R(7,-4)

Substituting we have:

(7-9)² + (-4+2)² = 8

(-2)²+ (-2)² = 8

4 + 4 = 8

If Coordinate   T(11,0)

Substituting we have:

(11-9)² + (0+2)² = 8

(2)²+ (2)² = 8

4 + 4 = 8

3) The length of the diameter of the circle is 8

Learn more  about circles:
https://brainly.com/question/29142813
#SPJ1

Answer:

39.7%

Explanation:

The balanced chemical equation for the reaction is:

3CuO + 2NH3 → 3Cu + N2 + 3H2O

First, we need to calculate the theoretical yield of N2:

Molar mass of CuO = 79.55 g/mol

Molar mass of NH3 = 17.03 g/mol

Molar mass of N2 = 28.02 g/mol

Number of moles of CuO = 68.8 g / 79.55 g/mol = 0.865 mol

Number of moles of NH3 = 45.9 g / 17.03 g/mol = 2.695 mol

From the balanced equation, 3 moles of CuO react with 2 moles of NH3 to produce 1 mole of N2. Therefore, the number of moles of N2 produced should be:

(1 mol N2 / 3 mol CuO) x (0.865 mol CuO) x (2 mol NH3 / 3 mol CuO) = 0.383 mol N2

The theoretical yield of N2 is:

Theoretical yield = 0.383 mol x 28.02 g/mol = 10.73 g

The percent yield is:

Percent yield = (Actual yield / Theoretical yield) x 100%

Percent yield = (4.25 g / 10.73 g) x 100%

Percent yield = 39.7%

Therefore, the percent yield of the experiment is 39.7%.

Hope this helps!

The number of grams in the specified moles for each compounds are;

1. Dinitrogen Pentoxide would be 1328.523 g

2. Iron (III) Nitrate = 653.076 g

3.   Sucrose (C12H22O11) = 54.7744 g

4. Potassium Iodide (KI) = 144.42 g

1. The molar mass of N2O5 = (2 × atomic mass of N) + (5 × atomic mass of O)

(2×14.01 g/mol) + (5 × 16.00 g/mol)

= 28.01 g/mol + 80.00 g/mol

Molar mass of N2O5 = 108.01 g/mol

12.3 moles× 108.01 g/mol = 1328.523

2. The molar mass of Fe(NO3)3 = atomic mass of Fe + 3 × (atomic mass of N + 3 × atomic mass of O)

(55.85 g/mol) + 3 × (14.01 g/mol) + 3 × (16.00 g/mol))

Molar mass of Fe(NO3)3 = 241.88 g/mol

2.7 moles × 241.88 g/mol = 653.076 g

3. Sucrose (C12H22O11):

The molar mass of C12H22O11 = (12×atomic mass of C) + (22×atomic mass of H) + (11 × atomic mass of O)

= (12×12.01 g/mol) + (22 × 1.01 g/mol) + (11 × 16.00 g/mol)

= 144.12 g/mol + 22.22 g/mol + 176.00 g/mol

= 342.34 g/mol

0.16 moles × 342.30 g/mol = 54.7744 g

4. Potassium Iodide (KI):

The molar mass of KI = atomic mass of K + atomic mass of I

= (39.10 g/mol) + (126.90 g/mol)

= 166.00 g/mol

So, 0.87 moles of KI = 0.87 moles × 166.00 g/mol = 144.42 grams

Find more exercises for solving grams or compounds;

https://brainly.com/question/2312089

#SPJ1

The concentration of hydrogen peroxide in the original sample is 0.061 M.

Hydrogen is the first element on the periodic table. It is the lightest and most abundant element in the universe. Hydrogen is an odorless, colorless gas that is highly flammable. It is a nonmetal and has the atomic number of one. Hydrogen has a valence of one, meaning it can form one bond with other elements. Hydrogen is found in most compounds, either as a single atom or as part of a molecule. It is the main component of water and is also found in many organic compounds, such as carbohydrates and proteins. Hydrogen is used in many industries, including the production of ammonia for fertilizer, the production of methane for fuel, and the production of methanol for fuel and other products.

To learn more about hydrogen

https://brainly.com/question/24433860

#SPJ1

Answer:

403.2 grams of oxygen

Explanation:

According to the balanced chemical equation, 2C2H6 + 7O2 —> 4CO2 + 6H2O, 4 moles of carbon dioxide (CO2) are produced for every 7 moles of oxygen (O2) that react. Therefore, if 7.2 moles of carbon dioxide are produced, the number of moles of oxygen that react is (7.2 moles CO2) * (7 moles O2 / 4 moles CO2) = 12.6 moles O2.

Since the molar mass of oxygen is approximately 32 g/mol, the mass of oxygen that reacts is (12.6 moles O2) * (32 g/mol) = 403.2 g. Therefore, 403.2 grams of oxygen react in order to produce 7.2 moles of carbon dioxide.

Answer: 2.53

P = Pressure of the ideal gas,

V = Volume of the ideal gas,

n =  Total amount of ideal gas that is measured in terms of moles,

R = Gas constant, and

T =  Temperature

By rearranging the ideal gas equation we get,

P = 380 kPa

V = 6 L

n = 3 moles

T = 27+273 = 300 K

Put the value given in this equation:

R = 380 kPa . 6L / 3 mol . 300 K

R =  2.53

The empirical formula for Epsom salts is MgSO₄, which means that for every one magnesium atom in the compound, there is one sulfur atom and four oxygen atoms.

To determine the empirical formula of Epsom salts we have to calculate the moles of each element in the sample:

Moles of magnesium = 1.01 g ÷ 24.31 g/mol = 0.0415 mol

Moles of sulfur = 1.33 g ÷ 32.06 g/mol = 0.0415 mol

Moles of oxygen = 2.66 g ÷ 16.00 g/mol = 0.1663 mol

Divide the number of moles of each element by the smallest number of moles:

0.0415 mol Mg ÷ 0.0415 mol = 1

0.0415 mol S ÷ 0.0415 mol = 1

0.1663 mol O ÷ 0.0415 mol = 4

If necessary, multiply each ratio by a whole number to get the smallest possible whole-number ratio:

1 : 1 : 4

This ratio is 1:1:4 for magnesium, sulfur, and oxygen respectively.

To learn more about empirical follow the link:

https://brainly.com/question/14044066

#SPJ1

The correct answer is D: All of the above. The environmental movement encompasses all of these fields, including scientific, social, and political aspects.

Movement is a physical activity that involves the change of position of a person or object over a particular area of space. It can include the displacement of the body, such as walking, running, and dancing, or the movement of objects, such as throwing a ball or lifting a weight. Movement can be voluntary or involuntary, as in reflexes or twitches, or it can involve the movement of non-living objects such as a car moving on a road. Movement can be used to express social and emotional states, such as joy or sadness, or to coordinate with others in a group. Movement can also help to explore and learn about the environment, to socialize with others, or to simply have fun.

To learn more about movement

https://brainly.com/question/382594

#SPJ1

Answer:

When a piece of iron that is 25 °C is dropped into water that is 15 °C, the heat from the iron will dissipate into the water until the temperature is the same by conduction. Thus, option A is correct.

What is conduction?

Conduction is the transfer of the dissipated energy from the hot iron metal at 25 °C to the water at a lower temperature. The heat or the energy molecules gets transferred from the region of high to lower temperature.

This occurs through the diffusion that allows the hot iron to release the energy from its body that diffuses and gets transferred to the water molecules that have a tempearture of 15 °C, which is lower than that of the iron.

Therefore, the piece of the iron loses its heat to the water till both have the same tempearture.

The hydronium ion concentration, [H₃O⁺], for a solution with a pH of 5.71 is 2.10 x 10⁻⁶ M.

The pH of a solution is defined as the negative logarithm (base 10) of the hydronium ion concentration, [H₃O⁺]. Therefore, we can use the pH value of 5.71 to calculate the hydronium ion concentration as follows:

pH = -log[H₃O⁺]

5.71 = -log[H₃O⁺]

log[H₃O⁺] = -5.71

[H₃O⁺] = -5.71 ÷ log

[H₃O⁺] = 2.10 x 10⁻⁶ M

The hydronium ion is formed when a water molecule accepts a proton (H⁺) from an acid. Low pH has a high concentration of hydronium ions and is considered acidic. Conversely, solutions with a high pH have a low concentration of hydronium ions and are considered basic.

To learn more about hydronium follow the link:

https://brainly.com/question/14619642

#SPJ1

The percent yield if you actually reacted 316.0 g of aluminum sulfide with 439.0 g of water to produce 125 g of aluminum hydroxide is 38.03%.

Percent yield refers to the percent ratio of actual yield to the theoretical yield. In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage. The amount of product actually made compared with the maximum calculated yield is called the percentage yield.

Given,

Mass of Aluminum sulfide = 316g

Mass of water = 439g

Moles of Aluminum sulfide = 316 / 150

= 2.107 moles

Al₂S₃ + 6H₂O = 2Al(OH)₃ + 3H₂S

From the reaction, 1 moles of aluminum sulfide gives 2 moles of aluminum hydroxide.

Thus, 2.107 moles will give 2.107 × 2 = 4.214 moles

mass of aluminum hydroxide = 4.214 × 78

= 328.7g

Actual yield = 125g

Percent yield = Actual yield × 100 ) ÷ Theoretical yield

= ( 125 × 100 ) ÷ 328.7

= 38.03%

Learn more about Percent yield, here:

https://brainly.com/question/17042787

#SPJ1

Aluminum oxide has an 81.18% percent yield.

Aluminum and oxygen atoms combine to form the chemical compound known as aluminum oxide, commonly known as alumina, with the formula Al2O3. Corundum, emery, and bauxite are a few examples of the minerals that naturally contain it and are utilized extensively in industrial and commercial applications.

The actual yield must be divided by the theoretical yield, then multiplied by 100% to determine the percent yield.

The formula for percent yield is as follows:

(actual yield / theoretical yield) x 100%= Percentage yield

When we enter the supplied values, we obtain:

percent yield = (1.38 mol/1.70 mol) x 100% percent yield : 0.8118 x 100%  

Percentage yield : 81.18%

As a result, aluminum oxide has an 81.18% percent yield.

To know more about aluminum oxide, visit:

brainly.com/question/25869623

#SPJ1

Answer: The answer is (20 kj is released)

Explanation:

Have A Good Day :)

Answer:

A

Explanation:

A. They are cooler than the surrounding area of the Sun.

Sunspots are regions on the Sun's photosphere where the magnetic fields are extremely strong, inhibiting the convective flow of hot gas from the solar interior. These regions appear darker than the surrounding photosphere because they are cooler (around 3,500-4,500 K) than the surrounding areas (around 5,500 K), making them less luminous.

The molarity of the KMnO₄ solution is 0.0491 M.

To determine the molarity of the KMnO₄ solution, we need to use the stoichiometry of the balanced chemical equation to calculate the number of moles of KMnO₄ that reacted with the H₂C₂O₄ solution.

The number of moles of H₂C₂O₄ in the solution is:

n(H₂C₂O₄) = conc(H₂C₂O₄) x V(H₂C₂O₄)

= 0.0505 M x 0.020 L

= 0.00101 mol

The number of moles of KMnO₄ in the solution is:

n(KMnO₄) = (2/5) x n(H₂C₂O₄)

= (2/5) x 0.00101 mol

= 0.000404 mol

Assume that the number of moles of KMnO₄ in the solution is equal to the number of moles of H₂C₂O₄ in the solution:

n(KMnO₄) = n(H₂C₂O₄)

= 0.00101 mol

The volume of the KMnO₄ solution to calculate the molarity:

M(KMnO₄) = n(KMnO₄) / V(KMnO₄)

= 0.00101 mol / 0.02055 L

= 0.0491 M

To learn more about molarity follow the link:

https://brainly.com/question/8732513

#SPJ1

If a less concentrated initial solution of sodium bicarbonate was used in beaker C, it would require more bicarbonate to neutralize the acid.

Concentrated means something that has been increased in strength or power by reducing its volume. It can refer to a solution that has a higher concentration of solutes than the original solution, a sound that is louder or stronger, or a force that is more powerful or intense. Concentrated can also refer to a person’s focus or attention on one particular thing, when their thoughts and energy are directed to a single point.

This is because the concentration of sodium bicarbonate determines how much of the acid can be neutralized by the solution. If the initial solution is less concentrated, then it will take more of the bicarbonate to neutralize the same amount of acid.

To learn more about concentrated
https://brainly.com/question/30558048
#SPJ1

In this process, 10.8 moles of carbon monoxide were converted into 10.8 moles of carbon dioxide.

The carbon dioxide and carbon monoxide have a 2:2 mole ratio according to the balanced chemical equation. The mole ratio will make it easier for us to determine how many moles of carbon dioxide will be created from the specified amount of carbon monoxide. (oxygen gas is excess).

The balanced chemical formula for carbon monoxide combustion is:

2carbon monoxide + oxygen → 2carbon dioxide

2 moles of carbon monoxide react with 1 mole of oxygen gas in this reaction, according to the stoichiometry, to produce 2 moles of carbon dioxide.

So, in order to generate 10.8 moles of carbon dioxide, we must:

10.8 moles carbon dioxide x (2 moles carbon monoxide / 2 moles carbon dioxide) = 10.8 moles carbon monoxide

In this process, 10.8 moles of carbon monoxide were converted into 10.8 moles of carbon dioxide.

To know more about carbon monoxide visit:-

https://brainly.com/question/22530423

#SPJ1

The Scientific Method is a method of research in which a problem is identified, relevant data are gathered, a hypothesis is formulated from these date, and the hypothesis is empirically rested.

The Scientific Method was used even in ancient times, but it was first documented by England's Sir Francis Bacon (15-61-1626) who set up inductive methods for scientific inquiry.

Scientific method is often spelled out in a simplistic stepwise fashion in textbooks as if it were some sort of recipe or set of instructions that scientists follow. It’s somewhat mythical, not something a working scientist necessarily thinks of and consciously follows step by step. But textbook authors have very limited space and must simplify.

Briefly, scientific method is not a set of instructions for research, but a habit of thought and investigation by which we gain the most reliable and objective information on how the world works—from the world of subatomic particles to the world of galaxies and beyond.

A scientist is, above all, an endlessly curious and highly disciplined person. A scientist has a question about nature. He or she conceives of a possible answer to it framed in the context of what we already know about the subject. That possible answer is called a hypothesis.

A hypothesis is useless and not really scientific at all unless there’s some conceivable way of empirically testing it—i.e., by direct observation. (Stephen Hawking even went so far as to say the string theory of particle physics isn’t really science at all, because there’s no conceivable way of putting it to an empirical test.) So a scientist’s next step is to formulate a way of observationally testing his or her hypothesis.

The test might be simple qualitative observation (not manipulating nature but just observing it with a trained and careful eye—as in much field research in animal behavior and paleontology), or it might be by experimentation (manipulating some variables to see what effect that produces on a system, as medical research, most laboratory science, and some field science).

The test should generate information—data, usually in numerical form. Next, one must ask whether those data really mean anything. Do they truly show an effect of your manipulated (independent) variables on the behavior of a system (dependent variables). This calls for tests of statistical significance—mathematical procedures of great variety, depending on the kind of data one is testing (Student’ t-test, analysis of variance, Person’s product-moment correlation coefficient, Tukey’s range test, and many others). These tests are meant to minimize subjective bias in the interpretation of data. The product of such tests is probability statements. Experimental scientists speak in probabilities, not certainties. Scientists will not say, for example, This proves that disease X is caused by virus Y, or that this new drug controls hypertension or produces leukemia remission better than the old one. Rather, they will make such statements as, There’s at least a 99.5% chance that variable X caused the observed change in variable Y. A careful scientist doesn’t assert “My findings prove ___,” but “My findings are consistent with the hypothesis that ___.”

Then, to have truly “done science,” one must make one’s findings available to the scientific community and the public—that is, publish them. Some say, if you don’t publish it, it’s not science. You’ve contributed nothing to the world’s understanding if you don’t publish. Public knowledge is the ultimate goal of science, not just the satisfaction of personal curiosity.

To publish one’s findings, one must first demonstrate that the work was important enough to warrant a share of the limited and expensive space in a recognized scientific journal; then show that one’s hypothesis and methods were sound; then show that the results were meaningful—often, but not always, by demonstration of statistical tests of confidence.

All of this entails surviving a process of peer review, in which an editor or grant agency sends your draft publication out to other experts in your field, whose job is basically to find fault (if there is any) with what you’ve done: to closely scrutinize your logic, assumptions, methods, findings, and tests of significant to see if they can find anything wrong with it, serious enough that you need to revise your paper or the journal editor should outright reject it for publication. The prestigious journals Cell, Science, and Nature reject 97% of all papers that scientists submit for publication, for various reasons including insufficient importance to warrant publication, inappropriateness of subject matter to those journals, unclear hypotheses, fallacious methods, poor analysis of the results, violation of research ethics, or poor writing.

The overall dipole moments of the compounds have been shown in the image attached to this answer

The polarity of a chemical bond or molecule is determined by the dipole moment. It is a vector variable that denotes the division of a molecule's positive and negative charges along a specific axis.

The difference in electronegativity between the atoms in a bond is what causes the dipole moment to form. A measure of an atom's ability to draw electrons to itself is its electronegativity.

Learn more about dipole moment:https://brainly.com/question/14140953

#SPJ1

The number of moles of products based on the information given is 0.5 moles product.

It is given that each unshaded sphere represents an atom A and shaded represents B. If we look at the diagram, we have 8 unshaded doubly attached units and 4 unshaded doubly attached units on the left side which means we have 8 A2 molecules that react with 4 B2 molecules.

Whereas in the right-side diagram(which are products), 4 molecules have 4 unshaded and one shaded sphere, which means it is BA4 and 2 moles have two shaded spheres which mean it is B2. Hence, the number of moles of products based on the information given is 0.5 moles product.

Learn more about moles on

https://brainly.com/question/29367909

#SPJ1