d) add a kalman filter to this system and attempt to remove the additional noise. hint: remember to switch the system to continuous time!

To be 95% confident that the estimate of the population mean is within 4 of the true population mean, a sample size of n is required.

The formula for determining the required sample size to estimate the population mean with a desired margin of error is given by:

n = (Z * δ / E[tex])^2\\[/tex]

where Z is the z-score corresponding to the desired level of confidence (in this case, 95% confidence corresponds to a z-score of approximately 1.96), δ is the population standard deviation (given as 71.1), and E is the desired margin of error (given as 4).

Plugging in the values into the formula, we have:

n = (1.96 * 71.1 / 4[tex])^2[/tex]

Calculating this expression, we find that the required sample size is approximately 980.61. Since sample sizes should be whole numbers, rounding up to the nearest whole number, the required sample size is 981.

Therefore, a sample size of 981 is required to estimate the population mean with a 95% confidence level and a margin of error of 4.

Learn more about z-score here:

https://brainly.com/question/31871890

#SPJ11

The textbook search committee can select 3 books out of the 20 in 1140 different ways.

To determine the number of ways the textbook search committee can select 3 books out of the 20 for further consideration, we can use the concept of combinations.

The number of ways to select a group of 3 books from a total of 20 can be calculated using the formula for combinations:

C(n, r) = n! / (r!(n - r)!)

In this case, we have 20 books to choose from, and we want to select a group of 3 books. So, plugging in the values into the combination formula:

C(20, 3) = 20! / (3!(20 - 3)!)

Simplifying this expression gives us:

C(20, 3) = (20 * 19 * 18) / (3 * 2 * 1)

C(20, 3) = 1140

This means that there are 1140 different combinations of 3 books that the committee can choose for further consideration out of the initial set of 20 books.

To learn more about combinations click on,

https://brainly.com/question/15170273

#SPJ4

An approximation of order is O(h⁸). (option a)

In this case, you are interested in the Romberg integration with the R₄,₄ approximation. The notation R₄,₄ indicates that the method has been iterated four times, resulting in a table with four rows and four columns. Now, let's discuss the order of this approximation.

The order of the Romberg integration method corresponds to the rate at which the error decreases as the step size h diminishes. The general formula to determine the order of Romberg integration is O(h²ⁿ)), where n is the number of iterations.

For the R₄,₄ approximation, we have n = 4 because the method has been iterated four times. Plugging this value into the formula, we get O(h²ˣ⁴), which simplifies to O(h⁸). Therefore, the answer is (a) O(h⁸).

To know more about integration here

https://brainly.com/question/18125359

#SPJ4

Complete Question:

When approximating ∫f(x)dx using Romberg integration, R₄,₄ gives an approximation of order: a) O(h⁸) b) O(h⁴) c) O(h¹⁰) d) O(h⁶)

The distance traveled by the vehicle during the 60-second period using the velocities at the beginning of the time intervals is approximately 366 feet. Another estimate using the velocities at the end of the time intervals gives a distance traveled of approximately 370 feet.

To estimate the distance traveled, we can use the average velocity over each time interval and multiply it by the duration of the interval. Using the velocities at the beginning of the time intervals, we calculate the average velocity for each interval as follows: (37 + 29) / 2 = 33 ft/s, (34 + 37) / 2 = 35.5 ft/s, (36 + 34) / 2 = 35 ft/s, and (31 + 36) / 2 = 33.5 ft/s. Multiplying each average velocity by 12 seconds (the duration of each interval) and summing them up, we get 33 * 12 + 35.5 * 12 + 35 * 12 + 33.5 * 12 = 366 feet.

Using the velocities at the end of the time intervals, we calculate the average velocity for each interval as follows: (29 + 37) / 2 = 33 ft/s, (37 + 34) / 2 = 35.5 ft/s, (34 + 36) / 2 = 35 ft/s, and (36 + 31) / 2 = 33.5 ft/s. Multiplying each average velocity by 12 seconds (the duration of each interval) and summing them up, we get 33 * 12 + 35.5 * 12 + 35 * 12 + 33.5 * 12 = 370 feet.

Therefore, the distance traveled is estimated to be approximately 366 feet using the velocities at the beginning of the time intervals and approximately 370 feet using the velocities at the end of the time intervals.

Learn more about average velocity here: brainly.com/question/14365341

#SPJ11

θ = arccos(-sin(θ) + 4) - π/2

To find the solutions within the given interval [0, 21), we can substitute values within that interval into the equation and solve for θ.

Please note that solving this equation exactly may involve numerical methods since it does not have a simple algebraic solution.

Let's solve the equation step by step.

The given equation is:

4 cos(θ) = -sin(θ) + 4

We can rewrite the equation using the identity cos(θ) = sin(π/2 - θ):

4 sin(π/2 - θ) = -sin(θ) + 4

Expanding and simplifying:

4 cos(θ) = -sin(θ) + 4

4 sin(π/2) cos(θ) - 4 cos(π/2) sin(θ) = -sin(θ) + 4

4 cos(π/2) cos(θ) + 4 sin(π/2) sin(θ) = -sin(θ) + 4

4 cos(π/2 + θ) = -sin(θ) + 4

Now, let's solve for θ within the given interval [0, 21).

4 cos(π/2 + θ) = -sin(θ) + 4

Since we need to find the solutions in terms of radians, we can use the inverse trigonometric functions to solve for θ.

Taking the arccosine of both sides:

arccos(4 cos(π/2 + θ)) = arccos(-sin(θ) + 4)

Simplifying:

π/2 + θ = arccos(-sin(θ) + 4)

Now, solving for θ:

θ = arccos(-sin(θ) + 4) - π/2

To find the solutions within the given interval [0, 21), we can substitute values within that interval into the equation and solve for θ.

Please note that solving this equation exactly may involve numerical methods since it does not have a simple algebraic solution.

Learn more about trigonometric functions:

https://brainly.com/question/25618616

#SPJ11

The Laplace transform of [tex]L[4t^4 e^{-8t} -e^{9t} COS \sqrt{2}t][/tex] is 24 / (s + 8)⁵ - (s - 9) / (s² - 18s + 83).

To determine the Laplace transform of the given function [tex]L[4t^4 e^{-8t} -e^{9t} COS \sqrt{2}t][/tex] , we can break it down into separate terms and apply the linearity property of the Laplace transform.

a) [tex]L[4t^4 e^{-8t}][/tex]

Using the Laplace transform table, we find that the transform of t^n e^{-at} is given by:

L{t^n e^{-at}} = n! / (s + a)^{n+1}

In this case, n = 4 and a = -8.

Therefore, the Laplace transform of 4t^4 e^{-8t} is:

L{4t^4 e^{-8t}} = 4 × 4! / (s - (-8))⁽⁴⁺¹⁾

                = 24 / (s + 8)⁵

b) L{-e^{9t} \cos(\sqrt{2t})}:

The Laplace transform of e^{at} \cos(bt) is given by:

L{e^{at} \cos(bt)} = s - a / (s - a)² + b²

In this case, a = 9 and b = \sqrt{2}.

Therefore, the Laplace transform of -e^{9t} \cos(\sqrt{2t}) is:

L{-e^{9t} \cos(\sqrt{2t})} = -(s - 9) / ((s - 9)^2 + (\sqrt{2})^2)

                           = -(s - 9) / (s² - 18s + 81 + 2)

                           = -(s - 9) / (s² - 18s + 83)

Now, using the linearity property of the Laplace transform, we can combine the two transformed terms:

L{4t^4 e^{-8t} - e^{9t} \cos(\sqrt{2t})} = L{4t^4 e^{-8t}} - L{e^{9t} \cos(\sqrt{2t})}

                                         = 24 / (s + 8)⁵ + -(s - 9) / (s² - 18s + 83)

So, the Laplace transform of the given function is 24 / (s + 8)⁵ - (s - 9) / (s² - 18s + 83).

Question: Use the Laplace transform table and the linearity of the Laplace transform to determine the following transform. Complete parts a and b below. [tex]L[4t^4 e^{-8t} -e^{9t} COS \sqrt{2}t][/tex]

To learn more about Laplace Transform: https://brainly.com/question/29583725

#SPJ11

We cannot determine which of the two options is the best one to get admitted to Yale.

In 2017, the mean of SAT scores in Ohio was 1149 with a standard deviation of 212. To get admitted to Yale, you need to score 1460 in the SAT or 33 in the ACT. So which of the two options is the best one to get accepted to Yale?

Solution: Given that the mean SAT scores in Ohio in 2017 was 1149, with a standard deviation of 212. Therefore, the normal distribution of SAT scores can be written as N (1149, 212).To get accepted into Yale, you need an SAT score of 1460 or an ACT score of 33.Because SAT scores are normally distributed, we can find the probability of scoring 1460 or higher by converting this score to a z-score. Using the formula below;Z = (X - µ)/σwhere X = 1460, µ = 1149 and σ = 212Z = (1460 - 1149)/212Z = 1.47Using the normal distribution table, we can find that the probability of obtaining a z-score of 1.47 or more is approximately 0.429. Therefore, the probability of obtaining a score of 1460 or higher on the SAT is 0.429.However, if you take the ACT instead, you will need to score at least 33. Unfortunately, we don't have enough information to compare the probability of scoring 33 or higher on the ACT to the probability of scoring 1460 or higher on the SAT. Therefore, we cannot determine which of the two options is the best one to get admitted to Yale.

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ11

The given mean and standard deviation can be used to calculate the z-score of a student's SAT score. The z-score will tell us how many standard deviations a student's score is above or below the mean. To find which test score (SAT or ACT) would give you a better chance of getting into Yale, we will need to convert the ACT score to an equivalent SAT score and then compare that to your SAT score converted to a z-score.

SAT scores are normally distributed in Ohio in 2017 with mean = 1149 and standard deviation = 212.To get accepted into Yale, you need an SAT score of 1460 or an ACT score of 33.Z-score of 1460 can be calculated as below:z = (x - μ) / σwhere x = 1460, μ = 1149 and σ = 212.z = (1460 - 1149) / 212z = 1.4747So, a student needs to score 1.4747 standard deviations above the mean to get into Yale.Using the standard normal distribution table, we can find that the probability of a randomly selected student scoring higher than 1.4747 standard deviations above the mean is approximately 7.6%.This means that if a student scores a 1460 on the SAT, they would be in the top 7.6% of all test-takers in Ohio in 2017.Now, we need to find the equivalent SAT score of an ACT score of 33. According to the College Board, the equivalent SAT score for an ACT score of 33 is 1460. So, if a student scores a 33 on the ACT, they would be in the top 1% of all test-takers, and this score would be equivalent to a 1460 on the SAT.Therefore, if a student can score a 33 on the ACT, they would have a better chance of getting into Yale than if they scored a 1460 on the SAT.

To know more about standard deviation, visit:

https://brainly.com/question/29115611

#SPJ11

The Standard Error of Measurement (SEM) for the economics final is approximately 27.5 is the answer.

SEM stands for Standard Error of the Mean. It is a measure of the precision or reliability of the sample mean as an estimate of the population mean. It shows the standard deviation of the sampling distribution of the mean.

To calculate the SEM, you need to divide the standard deviation (SD) by the square root of the sample size (n). The formula of SEM is given-

The formula to calculate SEM is:

SEM = Standard Deviation / √(1 - Reliability)

In this case, the reliability of the economics final is given as 0.84, and the standard deviation of the test scores is 11. By Putting these values into the formula, we get:

SEM = [tex]11 / \sqrt{(1 - 0.84)}[/tex]

SEM = [tex]11 / \sqrt{0.16}[/tex]

SEM ≈ 11 / 0.4

SEM ≈ 27.5

Therefore, the Standard Error of Measurement (SEM) for the economics final is approximately 27.5.

The reliability of a test, also known as the reliability coefficient, is not directly related to the standard deviation or SEM. It measures the consistency or repeatability of the test scores. It is usually expressed as a value between 0 and 1, with higher values indicating greater reliability.

know more about Standard Error of the Mean

https://brainly.com/question/30765693

#SPJ11

The real and imaginary parts to obtain the general solution y(t) = A cos(3t) + B sin(3t).

To find the general solution of the differential equation y⁽⁴⁾ + 18y'' + 81y = 0, we can use the characteristic equation method.

The characteristic equation is obtained by assuming the solution of the form y(t) = e^(rt), where r is a constant. Substituting this into the differential equation, we get:

r⁴e^(rt) + 18r²e^(rt) + 81e^(rt) = 0

Factoring out e^(rt), we have:

e^(rt)(r⁴ + 18r² + 81) = 0

For the equation to hold for all t, the term in the parentheses must be equal to zero:

r⁴ + 18r² + 81 = 0

This is a quadratic equation in r². Let's solve it:

(r² + 9)² = 0

Taking the square root of both sides:

r² + 9 = 0

r² = -9

r = ±√(-9)

Since the square root of a negative number is imaginary, we have complex roots:

r₁ = 3i

r₂ = -3i

The general solution of the differential equation is given by:

y(t) = c₁e^(3it) + c₂e^(-3it)

Using Euler's formula (e^(ix) = cos(x) + isin(x)), we can rewrite the general solution in terms of trigonometric functions:

y(t) = c₁(cos(3t) + isin(3t)) + c₂(cos(-3t) + isin(-3t))

Simplifying, we get:

y(t) = c₁(cos(3t) + isin(3t)) + c₂(cos(3t) - isin(3t))

y(t) = (c₁ + c₂)cos(3t) + i(c₁ - c₂)sin(3t)

Finally, we can combine the real and imaginary parts to obtain the general solution:

y(t) = A cos(3t) + B sin(3t)

where A = c₁ + c₂ and B = i(c₁ - c₂) are constants determined by initial conditions or boundary conditions.

Learn more about imaginary here

https://brainly.com/question/5564133

#SPJ11

To prove the conclusion (3x) (FX Hx) from the premises (x) ((Fx V Gx) > Hx) and (3x)Fx, we can use universal instantiation and universal generalization, along with the law of excluded middle.

By instantiating the existential quantifier in premise 1, we obtain Fx. From premise x, we can deduce that (Fx V Gx) implies Hx. By applying modus ponens to statements 4 and 3, we derive Hx.

Using existential generalization, we can introduce the existential quantifier to conclude that there exists an x such that FX and Hx hold.

Therefore, we have successfully proven the conclusion (3x) (FX Hx) from the given premises.

To learn more about  universal instantiation visit:

brainly.com/question/30578957

#SPJ11

Using the formula of area of a triangle and area of a rectangle, the area of figure A, B and C are 27units², 24 units² and 4√5 units² respectively

To determine the area of the figure, we have to find the area of figure A, B and C and sum them up.

In triangle A, the area can be calculated using the formula;

A = 1/2 * base * height

Substituting the values into the formula;

A = 1/2 * 6 * 9

A = 27 units²

In figure B, we can use the formula of area of a rectangle;

A = L * W

Substituting the values into the formula;

A = 4 * 6

A = 24 units²

In figure c, we know the length of the hypothenuse

Using Pythagorean theorem;

6² = 4² + x²

x² = 6² - 4²

x = 2√5

Using the formula of area of a triangle;

A = 1/2 * 4 * 2√5

A = 4√5 units

Learn more on area of a triangle here;

https://brainly.com/question/17335144

#SPJ1

The volume V of the solid is (248/3)π cubic units.

To find the volume of the solid below the cone z = √(x² + y²) and above the ring 1 ≤ x² + y² ≤ 25, we can use polar coordinates to simplify the calculation.

In polar coordinates, we have x = rcos(θ) and y = rsin(θ), where r represents the distance from the origin to a point and θ represents the angle between the positive x-axis and the line connecting the origin to the point.

The given inequalities in terms of polar coordinates become:

1 ≤ x² + y² ≤ 25

1 ≤ r² ≤ 25

Since z = √(x² + y²), we can express it in terms of polar coordinates as z = √(r²cos²(θ) + r²sin²(θ)) = √(r²) = r.

So, the height of the solid at any point is equal to the radius r in polar coordinates to find the volume.

Now, we need to determine the limits of integration for r and θ.

For r, the lower limit is 1, and the upper limit is the radius of the ring, which is √25 = 5.

For θ, we need to consider a full circle, so the lower limit is 0, and the upper limit is 2π.

Therefore, the volume V of the solid can be calculated as:

V = ∫∫∫ r dz dr dθ

V = ∫[θ=0 to 2π] ∫[r=1 to 5] ∫[z=0 to r] r dz dr dθ

To evaluate the volume of the solid below the cone z = √(x² + y²) and above the ring 1 ≤ x² + y² ≤ 25, we'll integrate the expression as mentioned earlier:

V = ∫[θ=0 to 2π] ∫[r=1 to 5] ∫[z=0 to r] r dz dr dθ

Let's evaluate this integral step by step:

∫[z=0 to r] r dz = r[z] evaluated from z=0 to r = r(r-0) = r²

∫[r=1 to 5] r² dr = [(1/3)r³] evaluated from r=1 to 5 = (1/3)(5³ - 1³) = (1/3)(125 - 1) = (1/3)(124) = 124/3

∫[θ=0 to 2π] (124/3) dθ = (124/3)[θ] evaluated from θ=0 to 2π = (124/3)(2π - 0) = (124/3)(2π) = (248/3)π

Therefore, the volume V of the solid is (248/3)π cubic units.

To know more about volume check the below link:

https://brainly.com/question/14197390

#SPJ4

Suppose that X, Y, and Z are jointly distributed random variables, that is, they are defined on the same sample space. The values of the expressions are below.

E(-4Z+5) = 37

E(-2X+4Y/5) = 58/5

Var(-2+Y) = 20

E(-4Y²) = -276

Let's calculate the values of the expressions and the usage of the given statistics.

E(-4Z+5):

The anticipated fee (E) is a linear operator, so we are able to distribute the expectancy across the terms:

E(-4Z+5) = E(-4Z) + E(5)

Since the expected price is steady, we can pull it out of the expression:

E(-4Z+5) = -4E(Z) + 5

Given that E(Z) = -8:

E(-4Z+5) = -4(-8) + 5 = 32 + 5 = 37

Therefore, E(-4Z+5) = 37.

E(-2X+4Y/5):

Again, we can distribute the expectation throughout the terms:

E(-2X+4Y/5) = E(-2X) + E(4Y/5)

Since the expected cost is steady, we can pull it out of the expression:

E(-2X+4Y/5) = -2E(X) + 4E(Y)/5

Given that E(X) = -3 and E(Y) = 7:

E(-2X+4Y/5) = -2(-3) + 4(7)/5 = 6 + 28/5 = 30/5 + 28/5 = 58/5

Therefore, E(-2X+4Y/5)= 48/5.

Var(-2+Y):

The variance (Var) is not a linear operator, so we need to consider it in another way.

Var(-2+Y) = Var(Y) seeing that Var(-2) = 0 (variance of a consistent is 0).

Given that Var(Y) = 20:

Var(-2+Y) = 20

Therefore, Var(-2+Y) = 20.

E(-4Y²):

E(-4Y²) = -4E(Y²)

We don't have the direct facts approximately E(Y²), but we are able to use the variance and the implication to locate it. The method is:

Var(Y) = E(Y²) - [E(Y)]²

Given that Var(Y) = 20 and E(Y) = 7:

20 = E(Y²) - 7²

20 = E(Y²) -49

E(Y²) = 20 + 49

E(Y²) = 69

Now we can calculate E(-4Y²):

E(-4Y²) = -4E(Y²) = -4(69) = -276

Therefore, E(-4Y²) = -276.

To know more about linear equations,

https://brainly.com/question/28732353

#SPJ4

1. Carter invested her money for approximately 4.78 years.2.  the annual interest rate charged to Winnie with compound interest compounded semi-annually is approximately 92.4%.

1. To find the duration of Carter's investment, we can use the simple interest formula:

Interest = Principal * Rate * Time

Given:

Principal (P) = $5300

Rate (R) = 7.2% = 0.072 (as a decimal)

Interest (I) = $1200

Substituting the values into the formula, we have:

$1200 = $5300 * 0.072 * Time

Simplifying the equation:

Time = $1200 / ($5300 * 0.072)

Time ≈ 4.78 years

Therefore, Carter invested her money for approximately 4.78 years.

2. To find the annual interest rate charged to Winnie with compound interest compounded semi-annually, we can use the compound interest formula:

A = P(1 + r/n)^(n*t)

Given:

Principal (P) = $2112

Amount (A) = $1879

Number of compounding periods per year (n) = 2 (semi-annually)

Time (t) = 1.5 years

Substituting the values into the formula, we have:

$1879 = $2112(1 + r/2)^(2 * 1.5)

Simplifying the equation and isolating the variable:

(1 + r/2)^(3) ≈ 0.8888

Taking the cube root of both sides:

1 + r/2 ≈ 0.962

Subtracting 1 and multiplying by 2:

r ≈ 0.924

Therefore, the annual interest rate charged to Winnie with compound interest compounded semi-annually is approximately 92.4%.

Learn more about interest rate at https://brainly.com/question/25793394

#SPJ1

a)the HCF of 12xy and 3x is [tex]2 \times 3 \times x[/tex], which simplifies to 6x. b)  the HCF of 54xyz and 12x²12 is 2xy. c)  the HCF of 21x²y²z and 7.xyz is xyz. d) the HCF of 3a²b³c³, 9a³b³c³, and 18a²b²c² is 3a²b²c². d) the HCF of 6abc, 7ab³c, and 8abc³ is abc.

a) To find the highest common factor (HCF) of 12xy and 3x, we need to determine the highest power of each common factor that appears in both terms. Here, the common factors are 2, 3, and x. The highest power of 2 in both terms is 1 (from 12xy), the highest power of 3 is 1 (from 3x), and the highest power of x is 1. Therefore, the HCF of 12xy and 3x is[tex]2 \times 3 \times x[/tex] which simplifies to 6x.

b) The common factors in 54xyz and 12x²12 are 2, 3, x, and y. The highest power of 2 in both terms is 1, the highest power of 3 is 0 (as it appears in only one term), the highest power of x is 1, and the highest power of y is 1. Therefore, the HCF of 54xyz and 12x²12 is 2xy.

c) The common factors in 21x²y²z and 7.xyz are 7, x, y, and z. The highest power of 7 in both terms is 0 (as it appears in only one term), the highest power of x is 1, the highest power of y is 1, and the highest power of z is 1. Therefore, the HCF of 21x²y²z and 7.xyz is xyz.

d) To find the HCF of 3a²b³c³, 9a³b³c³, and 18a²b²c², we consider the common factors and their highest powers. The common factors are 3, a, b, and c. The highest power of 3 in all terms is 1, the highest power of a is 2, the highest power of b is 2, and the highest power of c is 2. Therefore, the HCF of 3a²b³c³, 9a³b³c³, and 18a²b²c² is 3a²b²c².

e) The common factors in 6abc, 7ab³c, and 8abc³ are a, b, and c. The highest power of a in all terms is 1, the highest power of b is 1, and the highest power of c is 1. Therefore, the HCF of 6abc, 7ab³c, and 8abc³ is abc.

For more such questions on HCF

https://brainly.com/question/21504246

#SPJ8

Conditional expectation of Y given X, the formula is:E(Y/X) = E(Y) + (ρ * (SD(Y) / SD(X)) * (X - E(X)))Where, ρ = the correlation coefficient between X and YE(Y) = expected value of YE(X) = expected value of XX = the value of X at which we want to calculate the conditional expectation of YSD(X) = standard deviation of XSD(Y) = standard deviation of Y.

The required information to find the conditional expected value of Y on condition that X = 17 has been provided below:Given that X follows normal distribution X ~ N (17, 3^2) and Y follows normal distribution Y ~ N (12, 2^2)Correlation coefficient (ρ) = 0.8We can use the formula to calculate the conditional expected value of Y on condition that X=17.E(Y/X=17) = E(Y) + (ρ * (SD(Y) / SD(X)) * (X - E(X)))E(Y/X=17) = 12 + (0.8 * (2 / 3) * (17 - 17)) = 12 + 0 = 12Therefore, the conditional expected value of Y on condition that X=17 is 12. Hence, option (D) is correct. Extra Information:To calculate the conditional expectation of Y given X, the formula is:E(Y/X) = E(Y) + (ρ * (SD(Y) / SD(X)) * (X - E(X)))Where, ρ = the correlation coefficient between X and YE(Y) = expected value of YE(X) = expected value of XX = the value of X at which we want to calculate the conditional expectation of YSD(X) = standard deviation of XSD(Y) = standard deviation of Y.

Learn more about standard deviation here:

https://brainly.com/question/29115611

#SPJ11

The given problem consists of two differential equations. In the first equation (a), we need to find the solutions for the equation [tex]x'' - 3x^12 - 20cos(24).[/tex] In the second equation (b), we need to find the solutions for the equation[tex]x^2 + 4x + 4x^2[/tex]ult-2), with initial conditions x(0) = 0 and x^2(0) = 1.

In equation (a), x'' represents the second derivative of x with respect to some independent variable. To find the solutions to this equation, we need more information about the independent variable or any additional initial or boundary conditions. Without this information, it is not possible to determine the exact solutions.

In equation (b), we have a quadratic equation involving x and its derivatives. The initial conditions x(0) = 0 and x^2(0) = 1 provide us with the initial values of x and x^2 at the starting point. By solving this quadratic equation with the given initial conditions, we can find the solutions for x. The quadratic equation can be solved using various techniques such as factoring, completing the square, or using the quadratic formula. Once we find the solutions for x, we can use them to determine the behavior and properties of the system described by the equation.

Please note that without additional information or constraints, it is not possible to provide the exact solutions to the given equations. Additional details, such as the domain and range of x, are necessary for a more precise analysis and solution.

Learn more about quadratic here:

https://brainly.com/question/22364785

#SPJ11

[tex]\begin{aligned} \boxed{\tt{ \green{\cos = \frac{front \: side}{hypotenuse}}}} \\ \ \\ \cos(U) &= \frac{ST}{SU} \\& = \frac{8}{10} \\ &= \bold{\green{\frac{4}{5}}} \\ \\ \rm{\text{So, the value of cos(U) is}\: \bold{\green{\frac{4}{5}}}} \\ \\\small{\blue{\mathfrak{That's\:it\: :)}}} \end{aligned}[/tex]

The area of sector KLM, rounded to the nearest hundredth, is approximately 16.19 square units.

To find the area of sector KLM, we need to use the formula for the area of a sector, which is given by:

A =[tex](1/2) r^2[/tex]θ

where r is the radius of the circle, and θ is the central angle of the sector in radians.

First, we need to convert the angle measure from degrees to radians since the formula requires θ in radians. We know that:

1. The circle has 360 degrees

2. The angle at the center of the circle is twice the angle at the circumference of the circle.

So, the central angle of the sector in radians can be calculated as:

θ = (46/360) * 2 * π

θ ≈ 0.80 radians

Next, we need to find the radius of the circle by using the given length of KL. Since KL is a chord of circle L and the central angle of the sector passes through K and L, the radius of the circle is half of KL, or:

r = KL/2

r = 13/2

Now we can plug in the values of r and θ into the formula for the area of a sector to get:

A = [tex](1/2)(13/2)^2(0.80)[/tex]

A ≈ 16.19

In summary, to find the area of sector KLM, we used the formula for the area of a sector and first converted the angle measure from degrees to radians. We then found the radius of the circle from the given length of KL, which was used in the area formula along with the angle measure to calculate the area of the sector KLM.

For such more questions on square

https://brainly.com/question/27307830

#SPJ8

In a collection of phone calls, let's define the random variable as the number of voice calls. We assume that data calls and voice calls occur independently of one another.

The random variable represents the count or number of voice calls within a given set of phone calls. It captures the variability and uncertainty associated with the number of voice calls that may occur in a particular collection of phone calls. By defining this random variable, we can analyze its probability distribution and statistical properties to gain insights into the behavior and characteristics of voice calls in relation to the overall phone call activity.

The assumption of independence between data calls and voice calls implies that the occurrence or non-occurrence of one type of call does not affect the occurrence or non-occurrence of the other type. This assumption allows us to analyze and model the random variable for voice calls separately from data calls, enabling a focused examination of voice call patterns and probabilities within the overall phone call context.

Learn more about random variable here: brainly.com/question/17238189

#SPJ11

The most appropriate term that describes "in a case-control study on Covid, cases remembered their exposures better" is information bias. Option d is correct.

Information bias, also known as recall bias or reporting bias, occurs when there is a systematic difference in the accuracy or completeness of information provided by different groups.

In this case, the statement suggests that cases (individuals with Covid) have a better memory of their exposures compared to the control group. This could introduce bias into the study results if the cases' ability to recall and report their exposures is different from that of the control group.

Therefore, option d is correct.

Learn more about case-control study https://brainly.com/question/30760832

#SPJ11

Counting in a base-7 place value system involves using seven digits (0-6) to represent numbers. The first paragraph will summarize the answer, and the second paragraph will explain how counting in a base-7 system works.

In base-7, the place values are powers of 7, starting from the rightmost digit. The digits used are 0, 1, 2, 3, 4, 5, and 6.

Counting in base-7 begins with the single-digit numbers: 0, 1, 2, 3, 4, 5, and 6. After reaching 6, the next number is represented as 10, followed by 11, 12, 13, 14, 15, 16, and 20. The pattern continues, where the numbers increment until reaching 66. The next number is represented as 100, followed by 101, 102, and so on.

The key concept in base-7 counting is that when a digit reaches the maximum value (6 in this case), it resets to 0, and the digit to the left is incremented. This process continues for each subsequent place value.

For example:

14 in base-7 represents the number 1 * 7^1 + 4 * 7^0 = 11 in base-10.

24 in base-7 represents the number 2 * 7^1 + 4 * 7^0 = 18 in base-10.

36 in base-7 represents the number 3 * 7^1 + 6 * 7^0 = 27 in base-10.

By following this pattern, we can count and represent numbers in the base-7 system.

Learn more about digits here:

https://brainly.com/question/30142622

#SPJ11

1. T is a linear transformation.

2. The matrix of linear transformation is [T] = [(1/√5) cos x - sin x, cos x;(-2/√5) cos x + sin x, sin x].

Given function,T:R² → R² + span{cos x, sin x}T(a,b) = (a + b) cos x + (a - b) sin x

We have to show that T is a linear transformation.

Linear transformation follows two conditions:

Additivity: T(u + v) = T(u) + T(v)

Homogeneity: T(cu) = cT(u)

T(a₁, b₁) = (a₁ + b₁) cos x + (a₁ - b₁) sin x

T(a₂, b₂) = (a₂ + b₂) cos x + (a₂ - b₂) sin x

T(a₁ + a₂, b₁ + b₂) = (a₁ + a₂ + b₁ + b₂) cos x + (a₁ + a₂ - b₁ - b₂) sin x

= [(a₁ + b₁) cos x + (a₁ - b₁) sin x] + [(a₂ + b₂) cos x + (a₂ - b₂) sin x]

= T(a₁, b₁) + T(a₂, b₂)

Therefore, T(u + v) = T(u) + T(v) holds.

Now, T(cu) = cT(u)

T(ca, cb) = (ca + cb) cos x + (ca - cb) sin x

= c(a + b) cos x + c(a - b) sin x

= cT(a, b)

Therefore, T(cu) = cT(u) holds.

Thus, T is a linear transformation.

2. [T] = [T(i), T(j)][T(i), T(j)] = [(1 + 1) cos x + (1 - 1) sin x, (1 - 1) cos x + (1 + 1) sin x]= [2cos x, 2sin x]

3. B {i - 2j, j}, C {cos 2x + 3sin x, cos x - sin x}Since B is not orthonormal, first orthonormalize it: i - 2j = i - 2 projⱼi = (1/√5)i - (2/√5)j

Hence, B becomes an orthonormal basis ={(1/√5)i - (2/√5)j, (1/√5)j}Let T(a₁i - 2a₂j + b₁j, b₂i - 2b₂j)= a₁[(1/√5)i - (2/√5)j] cos x + b₁(cos 2x + 3sin x) + a₂[(1/√5)j] cos x - b₂(sin x - cos x)

By the definition of [T], we can see that the first column is [T(i - 2j)], and the second column is [T(j)] in terms of the orthonormal basis.

So, we have[T(i - 2j), T(j)] = [(1/√5) cos x - sin x, cos x;(-2/√5) cos x + sin x, sin x]

Finally, we get[T] = [T(B)], where B is the orthonormal basis= [(1/√5) cos x - sin x, cos x;(-2/√5) cos x + sin x, sin x]

Hence, the matrix of linear transformation is [T] = [(1/√5) cos x - sin x, cos x;(-2/√5) cos x + sin x, sin x].

To learn more about matrix

https://brainly.com/question/28180105

#SPJ11

A 3x2 factorial ANOVA has a total of four F-tests.

In a factorial ANOVA, the number of F-tests is determined by the number of factors and their levels. In this case, the factorial ANOVA has two factors: Factor A with 3 levels and Factor B with 2 levels. The number of F-tests is equal to the number of unique combinations of factor levels minus 1.

For a 3x2 factorial design, we have 3 levels for Factor A and 2 levels for Factor B. The unique combinations of factor levels are (A1, B1), (A1, B2), (A2, B1), (A2, B2), (A3, B1), and (A3, B2). Therefore, there are 6 unique combinations, resulting in 6-1 = 5 F-tests.

However, since the interaction between the factors is also tested, one F-test is used to examine the interaction effect. Hence, the total number of F-tests in a 3x2 factorial ANOVA is 5-1 = 4.

Therefore, a 3x2 factorial ANOVA has four F-tests.

To learn more about ANOVA visit : https://brainly.com/question/15084465

#SPJ11

The F ratio is approximately 0.833, as calculated by dividing 25 by 30.

In an analysis of variance (ANOVA), the F ratio is a statistical measure used to compare the variability between different groups to the variability within each group. It is calculated by dividing the between-group estimate of the population variance by the within-group estimate.

In this scenario, the between-group estimate of the population variance is given as 25, and the within-group estimate is given as 30. To find the F ratio, we divide the between-group estimate by the within-group estimate.

F ratio = between-group estimate / within-group estimate

F ratio = 25 / 30

Simplifying the expression, we have:

F ratio ≈ 0.833

Therefore, the correct answer is c) 25/30 = 0.833.

The F ratio is a crucial component in conducting hypothesis tests in ANOVA. It allows us to determine whether the differences between the group means are statistically significant or simply due to random variation within each group. By comparing the F ratio to a critical value from the F-distribution, we can assess the significance of the observed differences.

The numerator of the F ratio, which represents the between-group estimate of the population variance, measures the variability between the group means. It quantifies the extent to which the means of different groups differ from each other. A larger value indicates greater differences between the group means, suggesting that the treatment or factor being studied has a significant effect.

The denominator of the F ratio, which represents the within-group estimate of the population variance, measures the variability within each group. It quantifies the extent to which the individual observations within each group deviate from their respective group means. A smaller value indicates less variation within each group, suggesting that the data points within each group are more consistent.

By dividing the between-group estimate by the within-group estimate, the F ratio allows us to compare the relative magnitude of the differences between groups to the random variability within each group. If the F ratio is sufficiently large, it provides evidence that the differences between the group means are unlikely to be due to random chance alone and are instead statistically significant.

To determine whether the observed F ratio is statistically significant, we compare it to a critical value from the F-distribution corresponding to the chosen significance level. If the observed F ratio exceeds the critical value, we reject the null hypothesis and conclude that there are significant differences between the group means. If the observed F ratio is smaller than the critical value, we fail to reject the null hypothesis and conclude that any observed differences between the group means are likely due to random variation.

In summary, the F ratio is a key statistical measure used in ANOVA to assess the significance of differences between group means. It is calculated by dividing the between-group estimate of the population variance by the within-group estimate. By comparing the F ratio to a critical value from the F-distribution, we can determine whether the observed differences between groups are statistically significant. In this case, the F ratio is approximately 0.833, as calculated by dividing 25 by 30.

Learn more about F ratio here

https://brainly.com/question/31961335

#SPJ11

The particular solution that satisfies the initial conditions is:

y = (-83/20) e^(2x) + (123/10) x e^(2x) + (1/4) e^(2x) + (12/5) cos(3x) + sin(3x)

To solve the given initial value problem, which is a second-order ordinary differential equation (ODE) with constant coefficients, we'll follow these steps:

Step 1: Find the homogeneous solution by solving the associated homogeneous equation:

y'' - 4y' + 4y = 0

The characteristic equation is:

r^2 - 4r + 4 = 0

Solving this quadratic equation, we get:

(r - 2)^2 = 0

r - 2 = 0

r = 2 (double root)

Therefore, the homogeneous solution is:

y_h = C1 e^(2x) + C2 x e^(2x), where C1 and C2 are constants.

Step 2: Find a particular solution for the non-homogeneous equation:

We need to find a particular solution for the equation:

y'' - 4y' + 4y = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

We can assume a particular solution of the form:

y_p = A e^(2x) + B cos(3x) + C sin(3x)

Taking derivatives:

y_p' = 2A e^(2x) - 3B sin(3x) + 3C cos(3x)

y_p'' = 4A e^(2x) - 9B cos(3x) - 9C sin(3x)

Substituting these into the non-homogeneous equation, we get:

4A e^(2x) - 9B cos(3x) - 9C sin(3x) - 4(2A e^(2x) - 3B sin(3x) + 3C cos(3x)) + 4(A e^(2x) + B cos(3x) + C sin(3x)) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Simplifying the equation, we have:

4A e^(2x) - 8A e^(2x) + 4B cos(3x) + 9B cos(3x) - 4C sin(3x) - 9C sin(3x) + 4A e^(2x) + 4B cos(3x) + 4C sin(3x) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Grouping the terms, we get:

(-4A + 8A + 4A) e^(2x) + (4B - 9B + 4B) cos(3x) + (-4C - 9C + 4C) sin(3x) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Simplifying further:

8A e^(2x) - 5B cos(3x) - 5C sin(3x) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Equating the coefficients of the like terms on both sides, we have:

8A = 2, -5B = -12, -5C = -5

Solving these equations, we find:

A = 1/4, B = 12/5, C = 1

Therefore, a particular solution is:

y_p = (1/4) e^(2x) + (12/5) cos(3x) + sin(3x)

Step 3: Find the general solution:

The general solution is given by the sum of the homogeneous and particular solutions:

y = y_h + y_p

= C1 e^(2x) + C2 x e^(2x) + (1/4) e^(2x) + (12/5) cos(3x) + sin(3x)

Step 4: Apply initial conditions to find the values of constants:

Using the initial conditions y(0) = -2 and y'(0) = 4:

At x = 0:

-2 = C1 + (1/4) + (12/5)

-2 = C1 + (17/4) + (12/5)

C1 = -2 - (17/4) - (12/5)

C1 = -83/20

Differentiating y with respect to x:

y' = 2C1 e^(2x) + 2C2 x e^(2x) + C2 e^(2x) - (36/5) sin(3x) + 3 cos(3x)

To solve the given initial value problem, which is a second-order ordinary differential equation (ODE) with constant coefficients, we'll follow these steps:

Step 1: Find the homogeneous solution by solving the associated homogeneous equation:

y'' - 4y' + 4y = 0

The characteristic equation is:

r^2 - 4r + 4 = 0

Solving this quadratic equation, we get:

(r - 2)^2 = 0

r - 2 = 0

r = 2 (double root)

Therefore, the homogeneous solution is:

y_h = C1 e^(2x) + C2 x e^(2x), where C1 and C2 are constants.

Step 2: Find a particular solution for the non-homogeneous equation:

We need to find a particular solution for the equation:

y'' - 4y' + 4y = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

We can assume a particular solution of the form:

y_p = A e^(2x) + B cos(3x) + C sin(3x)

Taking derivatives:

y_p' = 2A e^(2x) - 3B sin(3x) + 3C cos(3x)

y_p'' = 4A e^(2x) - 9B cos(3x) - 9C sin(3x)

Substituting these into the non-homogeneous equation, we get:

4A e^(2x) - 9B cos(3x) - 9C sin(3x) - 4(2A e^(2x) - 3B sin(3x) + 3C cos(3x)) + 4(A e^(2x) + B cos(3x) + C sin(3x)) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Simplifying the equation, we have:

4A e^(2x) - 8A e^(2x) + 4B cos(3x) + 9B cos(3x) - 4C sin(3x) - 9C sin(3x) + 4A e^(2x) + 4B cos(3x) + 4C sin(3x) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Grouping the terms, we get:

(-4A + 8A + 4A) e^(2x) + (4B - 9B + 4B) cos(3x) + (-4C - 9C + 4C) sin(3x) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Simplifying further:

8A e^(2x) - 5B cos(3x) - 5C sin(3x) = 2 e^(2x) - 12 cos(3x) - 5 sin(3x)

Equating the coefficients of the like terms on both sides, we have:

8A = 2, -5B = -12, -5C = -5

Solving these equations, we find:

A = 1/4, B = 12/5, C = 1

Therefore, a particular solution is:

y_p = (1/4) e^(2x) + (12/5) cos(3x) + sin(3x)

Step 3: Find the general solution:

The general solution is given by the sum of the homogeneous and particular solutions:

y = y_h + y_p

= C1 e^(2x) + C2 x e^(2x) + (1/4) e^(2x) + (12/5) cos(3x) + sin(3x)

Step 4: Apply initial conditions to find the values of constants:

Using the initial conditions y(0) = -2 and y'(0) = 4:

At x = 0:

-2 = C1 + (1/4) + (12/5)

-2 = C1 + (17/4) + (12/5)

C1 = -2 - (17/4) - (12/5)

C1 = -83/20

Differentiating y with respect to x:

y' = 2C1 e^(2x) + 2C2 x e^(2x) + C2 e^(2x) - (36/5) sin(3x) + 3 cos(3x)

At x = 0:

4 = 2C1 + C2

4 = 2(-83/20) + C2

4 = -83/10 + C2

C2 = 4 + 83/10

C2 = 123/10

Therefore, the particular solution that satisfies the initial conditions is:

y = (-83/20) e^(2x) + (123/10) x e^(2x) + (1/4) e^(2x) + (12/5) cos(3x) + sin(3x)

To know more about constant coefficient,

https://brainly.com/question/27983400

#SPJ11

A function X that maps from a sample space to a measurable space is a random variable.

X-1(B) is an event and P(X-1(B)) is the probability of that event, and the converse is true.

Let X be a random variable defined on some probability space.

The definition of a random variable is a real-valued function X on a sample space that is measurable.

If X is a random variable and B is a Borel set, then X-1(B) is an event, and P(X-1(B)) is the probability of that event.

Therefore, X is a random variable since it meets the required conditions.

Yes, the converse is true.

If X is a random variable, then it meets the necessary conditions to be a function that maps from a sample space to a measurable space.

X-1(B) is an event and P(X-1(B)) is the probability of that event.

A random variable X is a function from the sample space to a measurable space that meets certain conditions.

The definition of a random variable is a function that maps from a sample space to a measurable space.

If X is a random variable and B is a Borel set, then X-1(B) is an event, and P(X-1(B)) is the probability of that event.

The converse is true if X is a random variable.

X is a function that maps from the sample space to a measurable space that meets certain requirements.

X-1(B) is an event and P(X-1(B)) is the probability of that event.

To know more about probability, visit:

https://brainly.com/question/31120123

#SPJ11

The expression logr + 3 logs - 9 lo can be simplified and written as a single logarithm: log(r * s^3 / o^9).

To simplify the given expression, we use the properties of logarithms. According to the properties, when we add or subtract logarithms with the same base, it is equivalent to multiplying or dividing the corresponding arguments. In this case, we have logr + 3 logs - 9 lo. By applying the property of addition, we can rewrite it as logr + log(s^3) - log(o^9). Then, using the property of subtraction, we can rewrite it as log(r * s^3 / o^9).

So, the simplified expression as a single logarithm is log(r * s^3 / o^9).

To know more about logarithm here: brainly.com/question/28346542

#SPJ11

a)  k1(x) = log2(x-5)

b) k2(x) = log2(x-5) - 2

c) k3(x) = -log2(x-5) - 2

d) k4(x) = log2(x-5) - 2

A)  It takes approximately 6.931 minutes for the probability to reach 50%.

B) It takes approximately 17.329 minutes for the probability to reach 80%.

Consider the following transformations of the function k(x) = log2 (x)

a) Shift it to the right 5 units.

Denote the function that results from this transformation by k1.

The function k(x) = log2(x) shifted to the right 5 units can be represented as k1(x) = log2(x-5)

b) Shift k1 down 2 units.

Denote the function that results from this transformation by K2.

The function k1(x) = log2(x-5) shifted down 2 units can be represented as k2(x) = log2(x-5) - 2

c) Reflect K2 about the x-axis.

Denote the function that results from this transformation by k3.

The function k2(x) = log2(x-5) - 2 reflected about the x-axis can be represented as k3(x) = -log2(x-5) - 2

d) Reflect k3 about the y-axis.

Denote the function that results from this transformation by k4.

The function k3(x) = -log2(x-5) - 2 reflected about the y-axis can be represented as k4(x) = log2(x-5) - 2

e) Use Maple to Plot k4

The following is the graph for the function k4:

Therefore, the Maple command for k4 can be written as plot(log2(x-5) - 2, x = -100 .. 100);2.

Between 12:00pm and 1:00pm, cars arrive at Citibank's drive-thru at the rate of 6 cars per hour. (0.1 car per minute). The following formula from statistics can be used to determine the probability that a car will arrive within t minutes of 12:00pm

F(t)= 1-e0.1t

Use Maple command fsolve to solve for t.

a) Determine how many minutes are needed for the probability to reach 50%.

The probability of a car arriving within t minutes can be represented by F(t) = 1 - e^(-0.1t).

We need to find the value of t such that F(t) = 0.5.

Therefore, we have:0.5 = 1 - e^(-0.1t)⇒ e^(-0.1t) = 0.5⇒ -0.1t = ln(0.5)⇒ t = -(ln(0.5))/(-0.1) = 6.931 min

Therefore, it takes approximately 6.931 minutes for the probability to reach 50%.

b) Determine how many minutes are needed for the probability to reach 80%.

The probability of a car arriving within t minutes can be represented by F(t) = 1 - e^(-0.1t).

We need to find the value of t such that F(t) = 0.8.

Therefore, we have:0.8 = 1 - e^(-0.1t)⇒ e^(-0.1t) = 0.2⇒ -0.1t = ln(0.2)⇒ t = -(ln(0.2))/(-0.1) = 17.329 min

Therefore, it takes approximately 17.329 minutes for the probability to reach 80%.

c) No, it is not possible for the probability to equal 100% because F(t) approaches 1 as t approaches infinity, but never actually reaches 1.3. Roger places one thousand dollars in a bank account that pays 5.6 % compounded continuously.  Let A(t) represent the balance in the account after t years.

Find A(t).

The balance in the account after t years is given by the formula A(t) = A0e^(rt), where A0 is the initial amount, r is the interest rate, and t is the time in years.

The balance in the account after one year with continuous compounding is:

A(1) = 1000e^(0.056 * 1)≈ 1056.09

Since the balance in the account after one year is less than $1060, Roger does not have enough money to buy a computer system.

The balance in the account after t years with monthly compounding is:

A(t) = 1000(1 + 0.059/12)^(12t)≈ 1095.02

Therefore, the balance in the account after one year with monthly compounding is:

A(1) = 1000(1 + 0.059/12)^(12*1)≈ 1059.36

Since the balance in the account after one year with monthly compounding is greater than $1060, the other bank is a better deal.

To learn more about probability

https://brainly.com/question/13604758

#SPJ11

In the given system of linear inequalities,

Solutions: (1, 0), (-2, 5)

Non-solutions: (2, 0), (0, 1)

To graph the system of linear inequalities, we will plot the boundary lines for each inequality and shade the appropriate regions based on the given inequalities.

1. Graphing the inequality y < −x + 3:

To graph y < −x + 3, we first draw the line y = −x + 3. This line has a slope of -1 and a y-intercept of 3. We can plot two points on this line, for example, (0, 3) and (3, 0), and draw a dashed line passing through these points. Since y is less than −x + 3, we shade the region below the line.

2. Graphing the inequality y ≥ 2x − 1:

To graph y ≥ 2x − 1, we first draw the line y = 2x − 1. This line has a slope of 2 and a y-intercept of -1. We can plot two points on this line, for example, (0, -1) and (1, 1), and draw a solid line passing through these points. Since y is greater than or equal to 2x − 1, we shade the region above the line.

Now let's find two ordered pairs that are solutions and two that are not solutions.

Ordered pairs that are solutions:

- (1, 0): This point satisfies both inequalities. Plugging in the values, we get y = -1 and y ≥ 1, which are both true.

- (-2, 5): This point satisfies both inequalities. Plugging in the values, we get y = 7 and y ≥ 3, which are both true.

Ordered pairs that are not solutions:

- (2, 0): This point does not satisfy the first inequality y < −x + 3 since 0 is not less than -2 + 3.

- (0, 1): This point does not satisfy the second inequality y ≥ 2x − 1 since 1 is not greater than or equal to -1.

By graphing the system of linear inequalities and examining the solutions and non-solutions, we have:

Solutions: (1, 0), (-2, 5)

Non-solutions: (2, 0), (0, 1)

To know more about linear inequalities, refer here:

https://brainly.com/question/31366329

#SPJ4