Answer:
Define Transportation in plants: Transportation in plants is when the plant transports water and other mineral throughout the whole plant from the roots to the stem and finally specific parts of a plant.
Define Respiration In Plants: Is when plants use photosynthesis to make their own food to make energy for the plant's growth
Calculate the pH for each case in the titration of 50.0 mL of 0.220 M HClO(aq) with 0.220 M KOH(aq). Use the ionization constant for HClO, 4.0×10⁻⁸
What is the pH before addition of any KOH?
What is the pH after addition of 25.0 mL KOH?
What is the pH after addition of 35.0 mL KOH?
What is the pH after addition of 50.0 mL KOH?
What is the pH after addition of 60.0 mL KOH?
To calculate the pH at each stage of the titration, we need to consider the reaction between HClO and KOH. The balanced chemical equation for the reaction is:
HClO(aq) + KOH(aq) → KClO(aq) + H2O(l)
Before the addition of any KOH, we have only the HClO solution. HClO is a weak acid, so we can use the ionization constant (Ka) to calculate its initial concentration of H⁺ ions. Since HClO is the only acid present initially, the initial concentration of H⁺ ions is equal to the initial concentration of HClO. Therefore, [H⁺] = 0.220 M.
To calculate the pH after each addition of KOH, we need to determine the amount of HClO that reacts with KOH. From the balanced equation, we can see that the stoichiometric ratio between HClO and KOH is 1:1. This means that for every mole of HClO that reacts, an equal number of moles of H⁺ ions are consumed.
Before addition of any KOH:
[H⁺] = 0.220 M (given)
pH = -log10(0.220) ≈ 0.66
After addition of 25.0 mL KOH:
The amount of HClO reacted can be calculated using the initial concentration and the volume of KOH added. Since the concentration of KOH is the same as HClO, the concentration of HClO remaining is (0.220 M - 0.220 M/4) = 0.165 M. The volume of HClO solution remaining is (50.0 mL - 25.0 mL) = 25.0 mL = 0.025 L. Therefore, [H⁺] = 0.165 M/0.025 L = 6.6 M.
After addition of 35.0 mL KOH:
Following the same calculations as above, [H⁺] = 0.110 M.
After addition of 50.0 mL KOH:
[H⁺] = 0.055 M.
After addition of 60.0 mL KOH:
[H⁺] = 0.022 M.
Keep in mind that pH is a logarithmic scale, so as the concentration of H⁺ ions decreases, the pH value increases.
Learn more about pH here : brainly.com/question/2288405
#SPJ11
two similar solids have a scale factor of 6:7. what is ratio of their volumes expressed in lowest terms? enter your answer by filling in the boxes. :
The ratio of the volumes of the two similar solids, expressed in the lowest terms, is 216:343.
To find the ratio of the volumes of two similar solids with a scale factor of 6:7, we can use the fact that the ratio of the volumes of similar solids is equal to the cube of the scale factor.
The ratio of the volumes of the two similar solids can be expressed as (6/7)³.
To simplify this ratio to its lowest terms, we can cube the numerator and denominator separately.
(6/7)³ = (6³)/(7³) = 216/343
Therefore, the ratio of the volumes of the two similar solids, expressed in lowest terms, is 216:343.
To know more about volume
https://brainly.com/question/29796637
#SPJ11
describe the spectrum you would observe for the emission spectrum of elemental hydrogen gas.
The observed emission spectrum of elemental hydrogen gas is; Series of Lines, colors, Balmer Series, and Ultraviolet and Infrared Lines.
The emission spectrum of elemental hydrogen gas consists of a series of discrete and distinct lines of different colors.
Series of Lines; The emission spectrum of hydrogen gas consists of a series of sharp, discrete lines rather than a continuous spectrum. Each line corresponds to a specific transition between energy levels in the hydrogen atom.
Colors; The lines in the hydrogen emission spectrum are of different colors, representing different wavelengths of light. The colors observed in the Balmer series include red, blue-green, violet, and other shades in between.
Balmer Series; The Balmer series is the most prominent and well-known part of the hydrogen emission spectrum. It corresponds to transitions where the electron in the hydrogen atom jumps from higher energy levels (n ≥ 3) to the second energy level (n = 2). The visible lines in the Balmer series include Hα (red), Hβ (blue-green), Hγ (violet), and so on.
Ultraviolet and Infrared Lines; In addition to the visible lines, the hydrogen emission spectrum also includes ultraviolet and infrared lines. The ultraviolet lines belong to the Lyman series (transitions to the first energy level, n = 1), while the infrared lines belong to the Paschen series (transitions to higher energy levels, n > 2).
To know more about emission spectrum here
https://brainly.com/question/31702311
#SPJ4
How many possible Mole Ratios are in the following reaction:
ZnO + 2 HCl --> ZnCl2 + H2O
Answer: 2 moles
Explanation:
Decomposition of potassium chlorate are performed in the lab to make oxygen. You are strictly advised to be careful with it. Why is that, what might happen?
A beam of electrons, a beam of protons, a beam of helium atoms, and a beam of nitrogen atoms cach moving at the same speed. Which one has the shortest de-Broglie wavelength? A. The beam of nitrogen atoms. B. The beam of protons, C. All will be the same D. The beam of electrons. E the beam of helium atoms
The beam of protons has the shortest de-Broglie wavelength if a beam of electrons, a beam of protons, a beam of helium atoms, and a beam of nitrogen atoms cach moving at the same speed.
Define De Broglie wavelength
The De Broglie wavelength, which is a wavelength present in all quantum mechanically manifested things and establishes the probability density of locating the object at a specific location in the configuration space, is said to be a manifestation of wave-particle duality. A particle's momentum is inversely correlated with its de Broglie wavelength.
For electrons,
λ = h/mv = h/(m * 4*10⁶ m/s) = 3.3 x 10⁻¹¹ m.
For protons,
λ = h/mv = h/(m * 4*10⁶ m/s) = 1.3 x 10⁻¹³ m.
For helium atoms,
λ = h/mv = h/(m * 4*10⁶ m/s) = 1.7 x 10⁻¹¹ m.
For nitrogen atoms,
λ = h/mv = h/(m * 4*10⁶ m/s) = 3.3 x 10⁻¹¹ m.
To learn more about electrons :
https://brainly.com/question/371590
#SPJ4
Predict Will you find starch in a plant leaf grown in the light? Why?
Answer:
You would find starch in a plant leaf.
Explanation:
This is due to the fact that when there is excess energy, it will be stored in plant tissue as starch.
Which formula demonstrates a double replacement reaction?
1. A + B --> AB
2. AB + CD --> AC + BD
3. AB --> A + B
4. A + BC --> AC + B
Answer:
2
Explanation:
Convert 5 pounds to kilograms
Help me pleaseeee
Answer:
2.268
Explanation:
5 lb × 0.45359237 = 2.26796185 kg
How to convert Pounds to Kilograms
1 pound (lb) is equal to 0.45359237 kilograms (kg).
1 lb = 0.45359237 kg
The mass m in kilograms (kg) is equal to the mass m in pounds (lb) times 0.45359237:
m(kg) = m(lb) × 0.45359237
Example
Convert 5 lb to kilograms:
m(kg) = 5 lb × 0.45359237 = 2.268 kg
Hope this helped!!!
Answer:
2.26796 kg
Explanation:
An example of a material that is excluded from the Right to Know Law is:
A. Professional cleaning products
B. "Liquid Paper" correction fluid
C. Carbon tetrachloride 2000
D. All of the above
The Right to Know Law is a law that mandates access to information held by the government. It applies to all states and localities in the United States. However, there are exceptions to this rule. In addition to public safety and privacy concerns, there is a category of information that is explicitly excluded from the Right to Know Law. (a) A professional cleaning product is an example of a material that is excluded from the Right to Know Law.
As per the given options, a professional cleaning product is an example of a material that is excluded from the Right to Know Law. In 1984, the federal government amended the Right to Know Law to require businesses to provide information about hazardous chemicals in the workplace to employees. This law, known as the Hazard Communication Standard (HCS), requires employers to make information about hazardous chemicals available to employees in the form of Safety Data Sheets (SDSs) and labels.The HCS applies to all employers with hazardous chemicals in their workplace and requires them to provide their employees with 100-word descriptions of the hazards associated with those chemicals, as well as information on how to protect themselves from exposure. Therefore, a professional cleaning product is an example of a material that is excluded from the Right to Know Law.
To know more about Right to Know Law visit:
https://brainly.com/question/32368201
#SPJ11
One of the following equations is that of a parabola with x-intercepts -5 and +5 in the standard (x, y) coordinate plane. Which equation?
a. y = x² + 25
b. y = (x + 5)(x - 5)
c. y = x(x + 5)(x - 5)
d. y = (x + 5)² - 25
Given that the x-intercepts of the parabola are -5 and 5 and we need to find out which equation from the given options is that of the parabola. Option (b) y = (x + 5)(x - 5)
is the equation of a parabola with x-intercepts -5 and +5 in the standard (x, y) coordinate plane.
We know that the x-intercepts of a parabola are the points at which y is zero.
We have two x-intercepts: x = -5 and x = 5. Let's find which equation is correct.
a. y = x² + 25
For x = -5, we have
y = (-5)² + 25 = 50.
It does not satisfy the equation for the x-intercept of -5.
For x = 5, we have
y = (5)² + 25 = 50.
It does not satisfy the equation for the x-intercept of 5.
b. y = (x + 5)(x - 5)
For x = -5, we have
y = (0) (10) = 0.
This satisfies the equation for the x-intercept of -5.
For x = 5, we have
y = (10) (0) = 0.
This satisfies the equation for the x-intercept of 5.
c. y = x(x + 5)(x - 5)
For x = -5, we have
y = (-5) (0) (10) = 0.
This satisfies the equation for the x-intercept of -5.For x = 5, we have
y = (5) (10) (0) = 0.
This satisfies the equation for the x-intercept of 5.
d. y = (x + 5)² - 25
For x = -5, we have
y = (0) - 25 = -25.
It does not satisfy the equation for the x-intercept of -5.
For x = 5, we have
y = (10) - 25 = -15.
It does not satisfy the equation for the x-intercept of 5.
y = (x + 5)(x - 5)
is the equation of a parabola with x-intercepts -5 and +5 in the standard (x, y) coordinate plane.
Hence, the correct answer is option B.
To know more about x-intercepts visit:
https://brainly.com/question/32051056
#SPJ11
The Ksp for silver carbonate (Ag2CO3) is 8.1 times 10-12. Calculate the solubility of silver carbonate in each of the following. (a) water mol/L
(b) 0.22 M AgClO3 mol/L
(c) 0.41 M Na2CO3 mol/L
The solubility of silver carbonate in water is approximately 1.26 × 10⁻³ mol/L. The solubility of silver carbonate in 0.22 M AgClO₃ is approximately 2.92 × 10⁻⁵ mol/L. The solubility of silver carbonate in 0.41 M Na₂CO₃ is approximately 1.20 × 10⁻⁶ mol/L.
To calculate the solubility of silver carbonate (Ag₂CO₃) in different solutions, we need to compare the solubility product (Ksp) with the concentrations of relevant ions in the solution. The balanced equation for the dissociation of silver carbonate is:
Ag₂CO₃(s) ⇌ 2Ag⁺(aq) + CO₃²⁻(aq)
(a) Solubility in water:
Since water does not contain any common ions, the concentration of Ag⁺ and CO₃²⁻ ions in water is initially zero. Therefore, we assume x as the solubility of Ag₂CO₃ in mol/L.
The equilibrium concentrations of Ag⁺ and CO₃²⁻ ions are both 2x (as the stoichiometric ratio is 1:1).
The Ksp expression is:
Ksp = [Ag⁺]²[CO₃²⁻] = (2x)²(2x) = 8x⁵
Since the Ksp is given as 8.1 × 10⁻¹², we can set up the equation:
8x⁵ = 8.1 × 10⁻¹²
Solving for x, we find:
x = (8.1 × 10⁻¹² / 8)^(1/5) ≈ 1.26 × 10⁻³ mol/L
Therefore, the solubility of silver carbonate in water is approximately 1.26 × 10⁻³ mol/L.
(b) Solubility in 0.22 M AgClO₃:
In this case, the Ag⁺ ions are already present in the solution due to the presence of AgClO₃. The concentration of Ag⁺ is given as 0.22 M. Since the Ksp expression is [Ag⁺]²[CO₃²⁻], we assume x as the solubility of Ag₂CO₃ in mol/L.
The equilibrium concentration of Ag⁺ ions will be 0.22 + 2x, and the concentration of CO₃²⁻ ions will be 2x.
The Ksp expression is:
Ksp = (0.22 + 2x)²(2x) = 8x³ + 0.88x² + 0.088x
Since the Ksp is still 8.1 × 10⁻¹², we can set up the equation:
8x³ + 0.88x² + 0.088x = 8.1 × 10⁻¹²
Solving for x, we find:
x ≈ 2.92 × 10⁻⁵ mol/L
Therefore, the solubility of silver carbonate in 0.22 M AgClO₃ is approximately 2.92 × 10⁻⁵ mol/L.
(c) Solubility in 0.41 M Na₂CO₃:
In this case, the CO₃²⁻ ions are already present in the solution due to the presence of Na₂CO₃. The concentration of CO₃²⁻ is given as 0.41 M. Since the Ksp expression is [Ag⁺]²[CO₃²⁻], we assume x as the solubility of Ag₂CO₃ in mol/L.
The equilibrium concentration of Ag⁺ ions will be 2x, and the concentration of CO₃²⁻ ions will be 0.41 + 2x. The Ksp expression is then:
Ksp = (2x)²(0.41 + 2x) = 4x³ + 1.64x² + 0.328x²
Again, setting Ksp equal to 8.1 × 10⁻¹², we can solve for x:
4x³ + 1.64x² + 0.328x² = 8.1 × 10⁻¹²
x ≈ 1.20 × 10⁻⁶ mol/L
Therefore, the solubility of silver carbonate in 0.41 M Na₂CO₃ is approximately 1.20 × 10⁻⁶ mol/L.
Learn more about the common ion effect here:
https://brainly.com/question/30772969
#SPJ4
Help me plz I’m like slow
Answer:
probably A that's my best guess
Answer:
Hello There!!
Explanation:
The answer is A.H20.This is water which isn't an ionic compound.
hope this helps,have a great day!!
~Pinky~
how many moles of tin (ii) fluoride are there in 908 grams of tin (ii) fluoride
The number of moles of tin (II) fluoride in 908 grams of tin (II) fluoride is approximately 2.65 moles.
How many moles of tin (II) fluoride are present in 908 grams?To determine the number of moles of tin (II) fluoride in a given mass, we need to use the concept of molar mass. The molar mass of tin (II) fluoride (SnF₂) is calculated by adding up the atomic masses of its constituent elements: tin (Sn) and fluorine (F).
The atomic mass of tin is 118.71 g/mol, and the atomic mass of fluorine is 18.998 g/mol. By adding these values together, we find that the molar mass of tin (II) fluoride is 156.71 g/mol.
To calculate the number of moles in a given mass, we use the formula:
Number of moles = Mass (in grams) / Molar mass.
In this case, we have 908 grams of tin (II) fluoride. Plugging the values into the formula, we get:
Number of moles = 908 g / 156.71 g/mol = 2.65 moles.
Understanding the relationship between mass, moles, and molar mass is fundamental in chemistry. This concept allows us to convert between different units and make quantitative calculations.
The molar mass plays a crucial role in determining the number of moles in a given mass and vice versa. Exploring further applications of moles and molar mass, such as stoichiometry and chemical reactions, can provide a deeper understanding of chemical processes and their measurements.
Learn more about moles
brainly.com/question/30885025
#SPJ11
Calculate ΔHo for the process ½ N2(g) + ½ O2(g) → NO(g)
from the following information
N2(g) + 2 O2(g) → 2 NO2(g) ΔHo = -107.0 kJ/mol
2 NO(g) + O2 → 2 NO2(g) ΔHo = -351.5 kJ/mol
Answer : The ΔHo for the given reaction is -244.5 kJ/mol.
Explanation:
Given, the following equations and the corresponding ΔHo values:N2(g) + 2 O2(g) → 2 NO2(g) ΔHo = -107.0 kJ/mol2 NO(g) + O2 → 2 NO2(g) ΔHo = -351.5 kJ/mol
The reaction given is ½ N2(g) + ½ O2(g) → NO(g)
To determine the value of ΔHo for the above process, we can use the given thermochemical equations as follows:
What is meant by thermochemical equation?
Thermochemical equations: The chemical equation which includes the term 'Heat' are referred to as thermochemical equations. They include chemical equations for endothermic reactions and exothermic reactions.
Endothermic Reaction. Those thermochemical reactions in which heat is absorbed. Change in enthalpy for this reaction is positive. Exothermic Reaction. Exothermic reactions are the reaction in which the heat or the energy is evolved during the reaction.ΔHo for the first equation isΔHo = [2ΔHo (NO2(g))] - [ΔHo (N2(g))] - 2[ΔHo(O2(g))]
We haveΔHo (NO2(g)) = - 107.0 kJ/molΔHo (N2(g)) = 0 kJ/molΔHo (O2(g)) = 0 kJ/mol
To find: ΔHo for the process ½ N2(g) + ½ O2(g) → NO(g)Solution:To obtain the required reaction, we need to subtract equation (1) from equation (2).
The obtained equation is:½ N2(g) + ½ O2(g) → NO(g) ΔHo = [2 NO(g) + O2 → 2 NO2(g)] - [N2(g) + 2 O2(g) → 2 NO2(g)] ΔHo = (-351.5 kJ/mol) - (-107.0 kJ/mol) ΔHo = -244.5 kJ/mol.
Therefore, the ΔHo for the given reaction is -244.5 kJ/mol.
Learn more about ΔHo here https://brainly.com/question/13949764
#SPJ11
which gas has the same density at 316 degrees and 1.50 atm that o2 gas has at 0 degrees and 1 atm?
a. SO2
b. N2
c. NO2
d. CO2
e. Cl2
The gas that has the same density at 316 degrees and 1.50 atm as oxygen (O2) gas at 0 degrees and 1 atm is (d) carbon dioxide (CO2). The solution to this problem requires knowledge of the combined gas law, which is given as: (P1V1/T1) = (P2V2/T2).
Where P = pressure, V = volume, and T = temperature in Kelvin (K).Oxygen (O2) gas at 0 degrees Celsius and 1 atm has a density of 1.429 g/L. The temperature and pressure can be converted to Kelvin and atm, respectively as:0 degrees Celsius = 273 K1 atm = 1.01325 barUsing these values, we can calculate the volume of O2 gas at the given conditions as follows:(1 atm * V) / (273 K) = (1.429 g/L)(1 atm * V) = (1.429 g/L) * (273 K)V = 0.0539 LAt 316 degrees Celsius and 1.50 atm, the density of carbon dioxide (CO2) is also 1.429 g/L. Therefore, using the combined gas law, we can calculate the volume of CO2 gas at these conditions as follows:(1.50 atm * V) / (589 K) = (1.429 g/L)(1.50 atm * V) = (1.429 g/L) * (589 K)V = 0.0494 LThis volume corresponds to the same density of O2 gas at 0 degrees Celsius and 1 atm. Therefore, the answer is (d) carbon dioxide (CO2).
To know more about gas visit:
https://brainly.com/question/31778762
#SPJ11
Will mark brainliest!!
Answer:
I think its B im not sure
but i hope this helps
write the net ionic equation for the mixing of sodium iodide and the solution of lead(ii) nitrate.
The net ionic equation for the mixing of sodium iodide and lead(II) nitrate is:
Pb2+ (aq) + 2I- (aq) → PbI2 (s)
The net ionic equation for the mixing of sodium iodide (NaI) and lead(II) nitrate (Pb(NO3)2) can be determined by examining the dissociation of the compounds and identifying the ions involved in the reaction. Here's the breakdown of the reaction:
Sodium iodide (NaI) dissociates in water to form sodium ions (Na+) and iodide ions (I-):
NaI (aq) → Na+ (aq) + I- (aq)
Lead(II) nitrate (Pb(NO3)2) dissociates in water to form lead(II) ions (Pb2+) and nitrate ions (NO3-):
Pb(NO3)2 (aq) → Pb2+ (aq) + 2NO3- (aq)
When these two solutions are mixed, a double displacement reaction occurs, leading to the formation of a precipitate. The iodide ions (I-) from sodium iodide react with the lead(II) ions (Pb2+) from lead(II) nitrate to form solid lead(II) iodide (PbI2):
2Na+ (aq) + Pb2+ (aq) + 2I- (aq) + 2NO3- (aq) → PbI2 (s) + 2Na+ (aq) + 2NO3- (aq)
The net ionic equation is obtained by removing the spectator ions, which do not participate in the reaction. In this case, the spectator ions are the sodium ions (Na+) and nitrate ions (NO3-):
Pb2+ (aq) + 2I- (aq) → PbI2 (s)
Learn more about ionic equation here, https://brainly.com/question/13879496
#SPJ11
All matter has:
volume
mass
density
all of the above
In an acid-base reaction involving neutral base B, what will be the conjugate acid Select the correct answer below , a. h20 b. H30 c. Oh- d hb+
In an acid-base reaction involving a neutral base B, the conjugate acid will be H₃O⁺. Option B is correct.
In an acid-base reaction involving a neutral base B, the conjugate acid will be formed by the addition of a proton (H⁺) to the base.
H₂O; Water (H₂O) is not a base but can act as an acid in certain reactions. It can donate a proton to form the hydroxide ion (OH⁻), making it a conjugate base rather than a conjugate acid.
H₃O⁺; The hydronium ion (H₃O⁺) is formed when a proton (H⁺) is added to water (H₂O). It is commonly found in aqueous acidic solutions and can act as an acid by donating a proton. Therefore, H₃O⁺ is the correct answer as it represents the conjugate acid in this acid-base reaction.
OH⁻; The hydroxide ion (OH⁻) is a base, not an acid. It accepts a proton (H⁺) to form water (H₂O) in basic solutions. OH⁻ would be the conjugate base, not the conjugate acid.
Hence, B. is the correct option.
To know more about conjugate acid here
https://brainly.com/question/8908134
#SPJ4
--The given question is incorrect, the correct question is
"In an acid-base reaction involving neutral base B, what will be the conjugate acid Select the correct answer below , A) H₂O B). H₃0 C). OH⁻."--
In scenario C, visible light is in the middle of the yellow region of the visible spectrum. Estimate its wavelength, frequency, and energy per photon. frequency: S-1 Incorrect In scenario D, visible light has a photon energy of 4.160 x 10-19 J. Determine its wavelength, frequency, and color. frequency: Incorrect S-1 wavelength: Incorrect energy per photon: wavelength: Incorrect The visible light in scenario D is Incorrect blue. nm nm In scenario C, visible light is in the middle of the yellow region of the visible spectrum. Estimate its wavelength, frequency, and energy per photon. frequency: S-1 Incorrect In scenario D, visible light has a photon energy of 4.160 x 10-19 J. Determine its wavelength, frequency, and color. frequency: Incorrect S-1 wavelength: Incorrect energy per photon: wavelength: Incorrect The visible light in scenario D is Incorrect blue. nm nm
Scenario C: Visible light is in the middle of the yellow region of the visible spectrum. Here, we have to estimate its wavelength, frequency, and energy per photon. The wavelength of visible light in the middle of the yellow region of the visible spectrum is approximately 575 nm.
The frequency of the given light can be calculated by using the formula c = νλ where ν is the frequency of light, λ is the wavelength of light, and c is the speed of light. Hence the frequency is given by,ν = c / λν = 3.0 x 10^8 m/s / 575 x 10^-9 mν = 5.22 x 10^14 Hz. To calculate the energy per photon, we use the formula E = hc/λ where h is Planck's constant and c is the speed of light. E = hc/λE = (6.63 x 10^-34 J s) x (3.0 x 10^8 m/s) / (575 x 10^-9 m)E = 3.45 x 10^-19 J per photon.
Scenario D: Visible light has a photon energy of 4.160 x 10^-19 J. Here, we have to determine its wavelength, frequency, and colour. We can use the formula E = hc/λ to find the wavelength of light, where E is the energy of the photon. λ = hc/Let's substitute the given values.λ = (6.63 x 10^-34 J s) (3.0 x 10^8 m/s) / 4.160 x 10^-19 Jλ = 4.8 x 10^-7 m.
The frequency of light can be calculated using the formula c = νλ, where c is the speed of light.ν = c / λν = 3.0 x 10^8 m/s / 4.8 x 10^-7 mν = 6.25 x 10^14 Hz.
To determine the colour of visible light, we can use a chart that maps wavelength to colour. From the chart, it can be seen that the visible light of wavelength 480 nm is blue. Therefore, the visible light in scenario D is blue.
know more about wavelength,
https://brainly.com/question/31143857
#SPJ11
Which of the gases below are primarily obtained from the atmosphere? obtained from Atmosphere Drag the correct choices into the box. Leave the incorrect choices outside of the box. helium hydrogen nitrogen oxygen argon chlorine
Helium, hydrogen, and chlorine are obtained from sources other than the atmosphere. The gases primarily obtained from the atmosphere are nitrogen, oxygen, and argon.
Nitrogen, oxygen, and argon are the main components of Earth's atmosphere and are commonly obtained from the air. They exist in significant quantities in the atmosphere and are often extracted for various industrial and commercial purposes.
On the other hand, helium, hydrogen, and chlorine are not primarily obtained from the atmosphere. Helium is typically extracted from natural gas wells, hydrogen is usually produced from fossil fuels or electrolysis of water, and chlorine is obtained through chemical processes such as electrolysis or from chloride-containing compounds.
The gases primarily obtained from the atmosphere are nitrogen, oxygen, and argon. Helium, hydrogen, and chlorine are obtained from sources other than the atmosphere.
To know more about atmosphere, visit:
https://brainly.com/question/921955
#SPJ11
Carbon-14 is an isotope used in carbon dating. The nucleus becomes Nitrogen-14 through beta decay. Its half-life is 5370 years. We can use this information to think about the large sample of 14C that is part of all organic matter. We can also think about the fate of a single 14C nucleus, as we did above.
For a single 14C nucleus in the tool, how likely is it that it will decay in the next 5370 years? For a single 14C nucleus in the tool, how likely is it that it will decay in the next 200 years?
The probability that a single carbon-14 (14C) isotope nucleus will decay in a given time period can be calculated using the concept of half-life. The half-life of carbon-14 is 5370 years, which means that after this time period, half of the initial amount of carbon-14 will have decayed into nitrogen-14.
To determine the likelihood of decay for a single 14C nucleus in the next 5370 years, we can say that there is a 50% chance of decay. This is because the half-life is the time it takes for half of the nuclei to decay, so after one half-life, there is a 50% chance that an individual nucleus will have decayed. For the next 200 years, we need to calculate the number of half-lives that occur in that time period. Since each half-life is 5370 years, we can divide 200 by 5370 to find the number of half-lives. The result is approximately 0.037, meaning that less than one-half-life has passed. Therefore, the likelihood of decay for a single 14C nucleus in the next 200 years is low. It is less than 50% because less than one-half-life has passed. However, it is important to note that the decay of an individual nucleus is a random process, and while we can make predictions based on probabilities, it is not possible to determine with certainty whether a specific nucleus will decay within a given time frame.
Learn more about isotope here : brainly.com/question/28039996
#SPJ11
A.) Which metal would you expect to have the highest melting point? Tc, Ag, or Rb
B.) Which metal would you expect to have the highest melting point? Hg, Ba, or Os
the element with highest melting point among Tc, Ag, Rb is Tc that is technetium, while the element which highest melting point among Hg, Os, Ba is Os that is osmium. both of these elements belong to the d block also known as transition elements.
there is no regular trend in the melting point among the d block elements and tungsten is the elements with the highest melting point among the transition elements. the s block elemts on the other hand have relatively low melting points.
Rb and Ba belong to s block thus have lower melting points in comparison to d block elemts like technetium, osmium, silver, and mercury. s block metals are soft and have low melting points due to very week inter-metallic bonding between its atoms.
to know more about transition elements refer to the link below
https://brainly.com/question/30389112
#SPJ4
A buffer is made with 0.493 M of the weak base methylamine ([tex]CH3NH2[/tex]) with 0.493 M [tex]CH3NH3Cl[/tex] (KA = 5.6 x 10^-4)
What is the pH of this buffer system?
If 0.100 M HBr is added to the buffer, what is the pH?
h^ ar hidrojen oksijen azot helyum
how are the functions of a flower's stamen and pistil related to reproduction?
Answer: the essential parts of a flower
Explanation:
are engaged with seed creation. In the event that a blossom contains both useful stamens and pistils, it is known as an ideal bloom, regardless of whether it doesn't contain petals and sepals. On the off chance that either stamens or pistils are deficient with regards to, the blossom is called imperfect.
Which of Graphs 1 correctly represents the relationship between the volume and Kelvin temperature of a gas?
Answer:
B
Explanation:
Pressure is directly proportional to temperature
Br2 + 2LiF → 2LiBr + F2
Given: If 3.6 moles of Br2, react with 9.4 moles of LiF
a) How many moles of F, are produced? I
1 grams F2 to mol = 0.02632 mol
10 grams F2 to mol = 0.26318 mol
20 grams F2 to mol = 0.52636 mol
30 grams F2 to mol = 0.78954 mol
40 grams F2 to mol = 1.05272 mol
50 grams F2 to mol = 1.3159 mol
100 grams F2 to mol = 2.6318 mol
200 grams F2 to mol = 5.2636 mol
Explain why most inorganic substances do not burn, yet organic substances will
burn.
Most inorganic substances do not burn because they do to contain carbon. Organic substances do contain carbon.
identify the reagents necessary to accomplish each of the following transformations Choose the orrect reaents from the following list: Enter the correct letter for each step of the reaction below.
(Reagents cannot be used more than once)
Reagent 1:
Reagent 2:
Reagent 3:
Reagent 4:
Reagent 5:
Reagent 6:
Reagent 7:
Reagent 8:
Reagent 9:
Reagent 10:
The reagents necessary to accomplish the following transformations are listed below:
Transformation 1
The transformation for this reaction is: CH3CH2CH(CH3)CH2CH3 -> CH3CH2CH2CH2CH3 Reagents used:
The reaction is an isomerization reaction that involves the shifting of the location of the methyl group. This reaction can be catalyzed by any of the three acidic catalysts: H2SO4, H3PO4, or BF3.
Transformation 2
The transformation for this reaction is: CH3CH2CH2OH -> CH3CH2CHO Reagents used:
The reaction is an oxidation reaction that involves the oxidation of alcohol to aldehyde. This reaction can be catalyzed by PCC (Pyridinium Chlorochromate).
Transformation 3
The transformation for this reaction is: CH3CH2CH2OH -> CH3CH2CH2Br Reagents used:
The reaction is a substitution reaction that involves the substitution of hydroxyl group with bromine. This reaction can be catalyzed by any of the two reagents: PBr3 or SOCl2.
Transformation 4
The transformation for this reaction is: CH3CH2CH2Br -> CH3CH2CH(CH3)OH Reagents used:
The reaction is a substitution reaction that involves the substitution of bromine with the hydroxyl group. This reaction can be catalyzed by any of the two reagents: Mg and dry ether or NaBH4.
Transformation 5
The transformation for this reaction is: CH3CH2CH(CH3)OH -> CH3CH2CH(CH3)Br Reagents used:
The reaction is a substitution reaction that involves the substitution of the hydroxyl group with bromine. This reaction can be catalyzed by any of the two reagents: PBr3 or SOCl2.
Transformation 6
The transformation for this reaction is: CH3CH2CH(CH3)Br -> CH3CH2COOH Reagents used:
The reaction is an oxidation reaction that involves the oxidation of alkyl halides to carboxylic acid. This reaction can be catalyzed by any of the two reagents: KMnO4 or HNO3.
Transformation 7
The transformation for this reaction is: CH3CH2CH2OH -> CH3CH2CH(CH3)CH2OH Reagents used:
The reaction is a dehydration reaction that involves the removal of water from the compound. This reaction can be catalyzed by any of the two reagents: H2SO4 or H3PO4.
Transformation 8
The transformation for this reaction is: CH3CH2CH(CH3)CH2OH -> CH3CH2CH2CH2COOH Reagents used:
The reaction is an oxidation reaction that involves the oxidation of the secondary alcohol to carboxylic acid. This reaction can be catalyzed by any of the two reagents: KMnO4 or HNO3.
Transformation 9
The transformation for this reaction is: CH3CH2CH2OH -> CH3COCH3 Reagents used:
The reaction is an oxidation reaction that involves the oxidation of primary alcohol to ketones. This reaction can be catalyzed by any of the two reagents: PCC or CrO3.
Transformation 10
The transformation for this reaction is: CH3COCH3 -> CH3CH2COOH Reagents used:
The reaction is an oxidation reaction that involves the oxidation of the ketone to carboxylic acid. This reaction can be catalyzed by any of the two reagents: KMnO4 or HNO3.
know more about isomerization reaction
https://brainly.com/question/28191756
#SPJ11