Describe the mechanisms by which out-of-plane deformation in the laser forming
process can occur. As part of your answer, identify the mechanism of laser forming
which is active for the experimental results provided.

Based on the calculations, the acceleration of this block as it slides down from the friction less ramp is equal to 0.85 m/s².

In order to determine the acceleration of this block, we would apply Newton's Second Law of Motion while taking moment about the tensional force.

The vertical component of the tensional force that is acting on the block as it slides down from this friction less ramp is given by:

T = Ma - Mgsinθ

0 = Ma - Mgsinθ

Ma = Mgsinθ

a = gsinθ

Substituting the given parameters into the formula, we have;

a = 9.8 × sin25

a = 9.8 × 0.4226

Acceleration, a = 0.85 m/s².

Read more on acceleration here: https://brainly.com/question/25961211

#SPJ1

Answer:

An object of volume 2.0×10⁴cm³ is under water .calculate the buoyant force of water on the object (Density of water=1000kg/m³) 196.2N

The surface of the stone which he should put on the ground is the base.

This is defined as the flat end which is usually located at the bottom with a larger surface area.

The large surface area helps to distribute the forces on all parts thereby preventing it from sinking.

Read more about Base here https://brainly.com/question/9624014

#SPJ1

(a) The initial speed at which the bottles are launched is 4.27 m/s.

(b) The horizontal displacement at which the bottle land is 1.75 m.

The initial speed of the bottle is calculated as follows;

[tex]T = \frac{2usin\theta}{g}[/tex]

where;

2usinθ = Tg

u = Tg/(2sinθ)

u = (0.5 x 9.8)/(2 x sin35)

u = 4.27 m/s

X = u²sin(2θ)/g

X = (4.27² x sin(70))/(9.8)

X = 1.75 m

Learn more about projectile here: https://brainly.com/question/12870645

#SPJ1

The result of 9 ∙ 10-⁵ divided by 3 ∙ 10-⁹ is 3 × 10⁴. Details about exponential functions can be found below.

Exponentiation is the process of calculating a power by multiplying together a number of equal factors, where the exponent specifies the number of factors to multiply.

According to this question, the following exponential function is given:

9 × 10-⁵ ÷ 3 × 10-⁹

9/3 × 10-⁵+⁹

3 × 10⁴

Therefore, the result of 9 ∙ 10-⁵ divided by 3 ∙ 10-⁹ is 3 × 10⁴.

Learn more about exponentiation at: https://brainly.com/question/2193820

#SPJ1

The acceleration of the aircraft is determined as -8.2 m/s².

The acceleration of the aircraft is calculated as follows;

a = Δv/t

where;

a = (5 - 250)/(30)

a = -8.2 m/s²

Thus, the acceleration of the aircraft is determined as -8.2 m/s².

Learn more about acceleration here: https://brainly.com/question/605631

#SPJ1

From the average velocity calculated, if the car should travel 363.0 miles, the time elapsed will be 7.6 hours.

Note that; Velocity is the speed at which an object moves in a particular direction. It is expressed as;

v = distance / time

Given that;

First we determine the velocity of the car.

v = distance / time

v = 263.0 miles / 5.5 hours

v = 47.8181 miles per hour.

Now, if the car travels 363.0 miles, time elapsed will be;

velocity = distance / time

time = distance / velocity

time = 363.0 miles / 47.8181 miles per hour

time = 7.6 hours

Therefore, from the average velocity calculated, if the car should travel 363.0 miles, the time elapsed will be 7.6 hours.

Learn more about speed here: brainly.com/question/7359669

#SPJ1

The speed of the wave created by Linh in the spring by moving the other end right and left with a frequency of 2 Hz is 1m/s.

The speed of a wave can be calculated by using the following formula:

Speed = Wavelength x Frequency

According to this question, Linh creates waves in the spring by moving the other end right and left with a frequency of 2 Hz. If wave crests are 0.5 m apart, the speed can be calculated as follows:

speed = 2Hz × 0.5m

speed = 1m/s

Therefore, the speed of the wave created by Linh in the spring by moving the other end right and left with a frequency of 2 Hz is 1m/s.

Learn more about speed at: https://brainly.com/question/10715783

#SPJ1

Answer:

three properties of intrinsic semiconductor

Explanation:

Given,

To Find:

a) Work done by the pump

b) Potential energy stored in the water

c)Power spent by the pump

d)Power rating of the pump.

Solution:

We know that,

[tex] \rm \: Work \: done = Force * Distance \: moved[/tex]

[tex] \rm \: Work\; Done =(100 \: kg \times \cfrac{10N}{kg} ) \times 60 \: m[/tex]

[tex] \rm \: Work\; Done =1000 \times 60 \: joule[/tex]

[tex] \boxed{\rm \: Work\; Done =60000 \: joule}[/tex]

[The unit'll be joule since N×M = J]

[tex] \rm \: P.E = m \cdot g \cdot h[/tex]

[tex] \rm \: P.E =100 \:kg \: \times \cfrac{10 \: N}{kg} \times 60[/tex]

[tex] \boxed{\rm \: P.E =60000 \: joule}[/tex]

[tex] \rm \: P = W/T[/tex]

[tex] \rm \: P = \cfrac{60000 \: joule}{20 \: seconds} =\boxed{\rm { 3000 \: Watts }}\: or \: \boxed{\rm 3 \: kW}[/tex]

Assumption: The pump is 100% efficient & works well.

Answer:

50kg

Explanation:

Force = 100N

Acceleration = 2 m/s2

Mass = ?

From formula,

Force = Mass * Acceleration

100 = Mass * 2

Mass = 50 kg

Hence ,mass of object is 50 kg.

Force(F) = 100N

Acceleration(a) = 2 m/s2

Mass(m) = ?

We know,

F = ma

100 = m x 2

m = 100/2

m = 50kg

Hence ,mass of object is 50 kg.

Answer:

50 kg

Explanation:

Force(F) = 100N

Acceleration(a) = 2 m/s2

Mass(m) = ?

We know,

F = ma

100 = m x 2

m = 50kg

hence ,mass is 50 kg.

The event that happens to sound waves from an object as it moves toward you is The pitch gets higher because of an increase in wavelength.

Sound waves refer to a form of transverse wave that compress and vibrate while travelling from one medium to another thereby transferring energy.

Therefore, The event that happens to sound waves from an object as it moves toward you is The pitch gets higher because of an increase in wavelength.

Learn more about sound waves below.

https://brainly.com/question/13105733

#SPJ1

Explanation:

The mass written on the periodic table is an average atomic mass taken from all known isotopes of an element. This average is a weighted average, meaning the isotope's relative abundance changes its impact on the final average. The reason this is done is because there is no set mass for an element.

Answer:

Acceleration = 2.143m/s²

Explanation:

Vf=Vi+at

(30)=(0)+a(14)

a=2.143m/s²

Based on this information, a psychologist would most likely conclude that Jonah's stress led him toward positive personal changes.

When a person is afraid or tensed about something, he overthinks about him and become stressed.

Anxious to the point that he couldn't eat very well without his stomach feeling queasy. As a result of his stress, Jonah increased his time of practicing basketball and asked an old team member to help him develop new skills he needed in order to make the team. After hearing that he made the basketball team a day after tryouts, Jonah went out for a large pizza with the rest of the team players.

As, he is feeling good, he wants to celebrate himself. So, he went to eat pizza with his team players. This shows that he is not stressed but happy.

Thus, ,this information depicts that Jonah's stress led him toward positive personal changes.

Learn more about stress.

https://brainly.com/question/9643296

#SPJ1

The two Health and safety risk at the scene are:

1. To deal with Chemicals.

2. To deal with Electricity.

The healthy and safety risk at the scene or office is described  as safety hazards that has to be taken when employers are working in office in some mechanical or electrical workshops.

Employers need to  e follow some healthy and safety risk while working in office like:

1. Chemicals : When employees have to handle harmful or dangerous chemicals as part of their work. To safety safe the must wear protective clothing.

2. Electrics - Electrical safety is an important issue in workplace , especially where there is a risk that heavy-duty equipment might cause electric shock.

These are some safety hazards employees must follow.

For more information regarding health and safety risk follow:

https://brainly.com/question/1331110

#SPJ1

The distance and Displacement travelled by skier is 17m and 16 m

Distance is the length of the actual path taken by object.

Displacement is the shortest distance between the initial and final position.

The SI unit of both distance and displacements is meter (m).

In this case,

Distance = 32m - 65m + 16 m

                 = 17 m

Here ,

Displacement  = Initial position - Final position

= 32m -16m  = 16m

Hence , The distance and displacement of the skier are 17m and 16m.

For more distance and displacement queries visit:

https://brainly.com/question/18965361

#SPJ1

Answer:

65

Explanation:

Answer:

fv nfv f n f vjrkfv frnv thrfn htrfn vt

Explanation:

v ntv tfrv tn vtv jr4v t5o vtv tv tv

A type of anchor that is a good choice when jacking or leveling the fastening component is a stud bolt anchor.

These are the type of anchor which bare embedded in concrete with the threaded portion on the outside.

This makes it easier to jack or level the fastening component which is why option B was chosen.

Read more about Anchor here https://brainly.com/question/17187235

#SPJ1

When living beings require energy, they require oxygen for breathing. The form in which oxygen is released back into the environment is carbon dioxide.

A vehicle built for use outside the atmosphere of the planet.

In pressurized tanks located outside the airlock of the station, the ISS gets a regular supply of oxygen from the planet.

These aren't enough to keep the station stocked for a long time, but they are plenty to keep topping the tank off because there are occasionally leaks.

Hydrogen and carbon dioxide combine to form biomass when oxygen is released into the environment.

Living beings need oxygen for breathing when they require energy. Carbon dioxide is the form in which oxygen is released back into the atmosphere.

Hence, oxygen is a must in the air supply aboard spacecraft,

To learn more about the spacecraft refer;

https://brainly.com/question/13478702

#SPJ1

The pathogen that immunization helps to prevent is virus.

To reduce the risk of atherosclerosis cut down on saturated fatty foods.

Immunization is defined as the prevention of pathogenic viral organisms from harming a living human host through the exposure of the host to an attenuated form of the virus to develop immunity prior to a future exposure.

Atherosclerosis is the deposition of fatty substances on the arterial wall leading to blocking of the blood vessels.

Learn more about immunization here:

https://brainly.com/question/8633386

#SPJ1

The efficiency of the steam engine is 78.9%.

The efficiency of a machine is a measure of the useful work done by the machine as against the work input into the machine.

Work output of the steam engine = 225 K

Work input of the steam engine = 285 K

The efficiency of the machine = 225/275 × 100% = 78.9%

Therefore, the efficiency of the steam engine is 78.9%.

Leran more about efficiency of machines at: https://brainly.com/question/7536036

#SPJ1

Answer:

Heat gain = Heat loss

Latent heat of fusion of water = 80 kcal/kg

Specific heat of water = 1 kcal /kg deg C

Heat gain = 1.33 * 80 + (12.4 + 1.33) T = 106 + 13.7 T

Heat Loss = 12.4 * (20 - T) = 248 - 12.4 ΔT

106 + 13.7 T = 248 - 12.4 T

26.1 T = 142

T = 5.4       final temperature

Answer: 10.310406 (works for acellus)

I tried to add an explanation but it wouldn't let me for some reason

Anyways watch the end of the video to see how to get the equation

Answer: 5

Explanation: If you use a real graph it could be easier to check, but here’s it the easy way.

You start at 0, add 3 as you are going right on the right , subtract 4 as you are going left, then again add 6 as you are going right, and you should get 5.

0+3= 3

3-4= -1

-1+6= 5

As a result this technological improvement, our structural information of rocks has improved greatly.

A petrographic microscope is a type of optical microscope that is used to identify rocks and minerals in very thin sections and also to investigate microscopic textures and features that are present in minerals and rocks.

This has improved greatly recent structural information about rocks.

Hence, microscopes used in the study of structures of rocks has overtime improved greatly our structural information about them

Learn more about structure of rocks here:

https://brainly.com/question/20151682

#SPJ1

Answer:

B is the correct answer.

Explanation:

Answer:

Showing results for Two point charge q, separated by 1.5cm have change value of +2.0 and -4.0AND/C respectively what is the magnitude of the Electric force midway between them?

Search instead for Two point charge q, seperated by 1.5cm have change value of +2.0 and -4.0N/C respectively what is the magnitude of the Electric force midway between them?

The final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

The total work done on the process will be conserved.

The lever is a simple machine which makes work easier by reducing the force applied to the load and increasing the distance traveled by the load.

Thus, the final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

Learn more about lever here: https://brainly.com/question/416386

#SPJ1

The spring constant, k will be 18 N/m.The ratio of force to one unit of displaced length is known as the spring constant.

Spring constant is defined as the ratio of force per unit displaced length.

Given data;

Mass of  block,m=0.250 k

Amplitude,A = 0.125 m

Velocity,V=3.00 m/

Spring constant,K=?

The formula for the spring constant when the spring is oscillate at the given amplitude A:

[tex]\rm K = \frac{V_{max}^2 m}{A} \\\\ K = \frac{3.0 \times 0.250}{0.125} \\\\ K=18 \ N/m[/tex]

Hence, the spring constant, k will be 18 N/m

To learn more about the spring constant, refer:

https://brainly.com/question/4291098

#SPJ1