despite contacting the glacier sample boundary at an angle larger than the critical angle, why is the first incident laser beam still refracted?

The intensity at a point on the circle at an angle of 4.60 ∘ from the centerline is I = I0×0.9976 watts per square meter.

Centerline is a term used to refer to a line that is equidistant from two opposite edges of a given object or area. It is a line that divides the object or area in two equal halves, running from one end to the other. Centerline can be found in a variety of objects, such as floors, walls, roofs, and roads, among many others. It is a line of symmetry, and is used to ensure that objects are properly aligned or balanced.

The intensity at a point on a circle at an angle of 4.60 ∘ from the centerline can be calculated by using the formula I = I0×cos(θ), where I0 is the intensity at the centerline and θ is the angle from the centerline.

In this case, I = I0×cos(4.60) = I0×0.9976.

Therefore, the intensity at a point on the circle at an angle of 4.60 ∘ from the centerline is I = I0×0.9976 watts per square meter.

To learn more about centerline

https://brainly.com/question/17034418

#SPJ1

The direction of an electromagnetic wave is given by the direction of its electric field vector and magnetic field vector.

Therefore, the answer is B) +x direction.

The direction of an electromagnetic wave is given by the direction of its electric field vector and magnetic field vector. In this case, the electric field vector is in the +y direction, and the magnetic field vector is in the -z direction.

The direction of propagation of the wave is given by the cross product of the electric and magnetic field vectors. Using the right-hand rule, we find that the direction of propagation of the wave is in the +x direction.

Therefore, the answer is B) +x direction.

Visit to know more about Electromagnetic wave:-

brainly.com/question/25847009

#SPJ11

The word that describes the transfer of potential energy into kinetic energy is "work". Work is a fundamental concept in physics that describes the transfer of energy from one object to another as a result of a force acting over a distance.

When work is done on an object, energy is transferred to that object, and the object gains kinetic energy. The amount of work done on an object is equal to the force applied to the object multiplied by the distance over which the force is applied.

In the context of an energy lab, the transfer of potential energy into kinetic energy can be observed in many different systems. For example, a simple pendulum consists of a mass suspended from a fixed point by a string.

When the mass is raised to a certain height, it gains potential energy due to its position relative to the ground. When the mass is released, it begins to swing back and forth, and its potential energy is gradually converted into kinetic energy as it moves faster and faster.

The transfer of energy from potential to kinetic is a key concept in understanding many different systems in physics and engineering, and the word "work" is used to describe this transfer in a concise and accurate way.

Know more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

The potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters is 0.0015 J, when rounded to one decimal place.

The potential energy of two charges 3.6 millicoulombs and 2.5 millicoulombs separated by a distance of 10 meters can be calculated using the formula for electrostatic potential energy: U = (1/4πε₀)q₁q₂/r, where q₁ and q₂ are the charges, and r is the distance between them.

In this case, U = (1/4πε₀) (3.6 x 10⁻⁶ C) (2.5 x 10⁻⁶ C) / (10 m). Calculating this yields a potential energy of 0.0015 J.

This potential energy is a result of the electric field that exists between two charges, and is due to the force of attraction or repulsion between them. This electrostatic potential energy can be used to do work, and can be converted into other forms of energy, such as kinetic energy.

Know more about potential energy here

https://brainly.com/question/24284560#

#SPJ11

using CBC with IV=010, the plain text 111110001100 would be encrypted as 1101 0010 1010.

Using CBC (Cipher Block Chaining) mode with IV (Initialization Vector) = 010, we can encrypt the plaintext message 111110001100 as follows:

- Divide the plaintext into 3 blocks of 4 bits each: 1111 1000 1100
- XOR the first block with the IV: 1111 ⊕ 010 = 1101
- Encrypt the XOR result with a block cipher (e.g. AES): assume we get the ciphertext block 1010
- XOR the ciphertext block with the second plaintext block: 1010 ⊕ 1000 = 0010
- Encrypt the XOR result with the same block cipher: assume we get the ciphertext block 0110
- XOR the second ciphertext block with the third plaintext block: 0110 ⊕ 1100 = 1010
- The final ciphertext is the concatenation of the three ciphertext blocks: 1101 0010 1010

Therefore, using CBC with IV=010, the plaintext 111110001100 would be encrypted as 1101 0010 1010.

To learn more about CBC https://brainly.com/question/30859463

#SPJ11

(a) The concentration of holes and electrons in an intrinsic sample of Si at room temperature can be computed using the intrinsic carrier concentration formula:

ni² = (Nv)(Nc)e^(-Eg/kT)

where ni is the intrinsic carrier concentration, Nv is the effective density of states in the valence band, Nc is the effective density of states in the conduction band, Eg is the band gap energy, k is the Boltzmann constant, and T is the temperature in Kelvin.

For Si at room temperature (T = 300K), Nv = 1.04x10^19 cm^-3, Nc = 2.81x10^19 cm^-3, and Eg = 1.12 eV. Substituting these values and solving for ni, we get:

ni = sqrt[(Nv)(Nc)e^(-Eg/kT)] = 1.5x10^10 cm^-3

Since Si is an intrinsic semiconductor, the concentration of electrons and holes are equal and are given by:

n = p = ni = 1.5x10^10 cm^-3

(b) The position of the Fermi level under these conditions can be determined using the relationship between the Fermi level and the carrier concentrations:

n = Ncexp[(Ef - Ec)/kT] and p = Nvexp[(Ev - Ef)/kT]

where Ef is the Fermi level energy, Ec and Ev are the energies of the conduction and valence bands, respectively.

Since n = p = ni, we can write:

ni² = NcNvexp[-Eg/kT] = Ne^(-Ef/kT)

where Ne is the total number of electrons in the conduction band.

Solving for Ef, we get:

Ef = Ec + (kT/2)ln(Nv/Nc) = Ev - (kT/2)ln(Nv/Nc) = 0.57 eV

Therefore, the position of the Fermi level in an intrinsic sample of Si at room temperature is 0.57 eV.

Learn more about intrinsic semiconductor here:

https://brainly.com/question/15184439

#SPJ11

The difference in size between a silver-108 atom and a helium nucleus is due to the fact that the atomic radius of the silver-108 atom is much larger than the diameter of the helium nucleus.

What is Nulceus?

The nucleus is positively charged because of the presence of protons, while neutrons have no charge. The number of protons in an atom's nucleus is called its atomic number and determines the element to which it belongs. The sum of the protons and neutrons in the nucleus is called the mass number.

Silver-108 has an atomic number of 47, which means it has 47 protons in its nucleus, along with 61 neutrons. The electrons of the silver atom are distributed around the nucleus in different energy levels or orbitals.

Learn more about Nulceus from the given link

https://brainly.com/question/5223117

#SPJ1

The air pressure in the tires of a 980-kg car is 3.4×105 N/m2. It is important to maintain proper air pressure in car tires as it affects the handling, performance, and fuel efficiency of the vehicle.

The force that the Earth's atmosphere applies to the ground below is known as air pressure, commonly referred to as atmospheric pressure. The air molecules' gravitational attraction towards the Earth is what generates this pressure. The air pressure and density are increased due to the compression of the air molecules nearest to the Earth's surface. A barometer is often used to measure air pressure since it measures the force the atmosphere exerts on a unit of surface area. The pascal (Pa) is the accepted unit of measurement for air pressure, however millibars (mb) and inches of mercury (inHg) are also frequently used.

Learn  more about air pressure here:

https://brainly.com/question/13081874

#SPJ11

The moment of inertia (Ixx) of the sphere in Appendix A expressed in terms of its total mass (m), with constant density (rho) and uniform mass distribution, is

  Ixx = (8/15) * pi * r^5 * rho

To determine the moment of inertia (Ixx) of the sphere in Appendix A expressed in terms of its total mass (m), we will consider the sphere's constant density (rho) and uniform mass distribution. Here's a step-by-step explanation:

1. First, let's find the mass of the sphere. Mass (m) can be calculated using the formula:
  m = (4/3) * pi * r^3 * rho
  where r is the radius of the sphere.

2. Now, let's calculate the moment of inertia (Ixx) of the sphere. For a solid sphere, the moment of inertia along any axis passing through its center can be expressed as:
  Ixx = (2/5) * m * r^2

3. We want to express Ixx in terms of the total mass (m). To do this, we can substitute the mass equation from step 1 into the moment of inertia equation from step 2:
  Ixx = (2/5) * [(4/3) * pi * r^3 * rho] * r^2

4. Finally, simplify the equation:
  Ixx = (8/15) * pi * r^5 * rho

So, the moment of inertia (Ixx) of the sphere in Appendix A expressed in terms of its total mass (m), with constant density (rho) and uniform mass distribution, is:
Ixx = (8/15) * pi * r^5 * rho

For more information on inertia, mass and density refer to https://brainly.com/question/1140505

#SPJ11

The Directed outward is thermal pressure and the Directed inward is the gravitational force, and systematic electrical force.

The sun's attraction is the external force acting on both the earth and the moon, but gravity causes the gravitational attraction of the earth and moon.

Pressure generates an outward force within the Sun, from the high-pressure core to the low-pressure surface. In contrast, gravity creates an inward force. A system is said to be in hydrostatic equilibrium when the force due to pressure exactly balances the force due to gravity.

Any main sequence star can be described as a dense gas/fluid in hydrostatic equilibrium. Gravity is balanced by the outward-acting forces of gas pressure and radiation pressure.

To know more about the Directed outward visit:

https://brainly.com/question/27561491

#SPJ1

Answer:

1485 TJ

Explanation:

Given that

m = (16.5*10^-3) kg

c = 3*10^8 m/s

E = mc^2

E = (16.5*10^-3 kg) * (3*10^8 m/s)^2

E = 1.485*10^15 J

To express in Terajoules

E = (1.485*10^15)/(1*10^12)

E = 1485 TJ

Ernesto's physician prescribes a loop diuretic, which acts directly on the Loop of Henle in the kidney. Option D.

Loop diuretics are a type of medication that act directly on the Loop of Henle, which is a section of the nephron in the kidney. The Loop of Henle is responsible for reabsorbing water and electrolytes, such as sodium and chloride, from the filtrate produced by the glomerulus of kidneys.

Loop diuretics inhibit the transport of sodium and chloride ions across the walls of the Loop of Henle, which prevents the reabsorption of these ions and leads to an increased excretion of water and electrolytes in the urine. This makes loop diuretics useful for treating conditions such as edema, congestive heart failure, and hypertension.

To learn more about kidneys, click here:

https://brainly.com/question/29992259

#SPJ11

(a) To find the average force exerted on the person's leg, we first need to calculate the acceleration of the hand and forearm. Using the equation vf = vi + at,

where vf is the final velocity (0 m/s, as the hand comes to rest),

vi is the initial speed (3.85 m/s), a is the acceleration,

and t is the time (240 ms or 0.24 s):

0 = 3.85 + a * 0.24

Solving for a, we get:

a = -3.85 / 0.24 ≈ -16.04 m/s²

Now, we can use Newton's second law (F = ma) to find the average force exerted on the leg, where F is the force, m is the mass (1.50 kg), and a is the acceleration (-16.04 m/s²):

F = 1.50 * -16.04 ≈ -24.06 N

The average force exerted on the leg is approximately -24.06 N (negative because it's in the opposite direction of the initial speed).

(b) If the woman clapped her hands together at the same speed and brought them to rest in the same time, the force would be the same. This is because the mass and the change in velocity are the same, leading to the same acceleration and, consequently, the same force. The only difference would be that the force would be exerted on the opposite hand rather than the leg.

Learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ11

(a) To find the average force exerted on the person's leg, we first need to calculate the acceleration of the hand and forearm. Using the equation vf = vi + at,

where vf is the final velocity (0 m/s, as the hand comes to rest),

vi is the initial speed (3.85 m/s), a is the acceleration,

and t is the time (240 ms or 0.24 s):

0 = 3.85 + a * 0.24

Solving for a, we get:

a = -3.85 / 0.24 ≈ -16.04 m/s²

Now, we can use Newton's second law (F = ma) to find the average force exerted on the leg, where F is the force, m is the mass (1.50 kg), and a is the acceleration (-16.04 m/s²):

F = 1.50 * -16.04 ≈ -24.06 N

The average force exerted on the leg is approximately -24.06 N (negative because it's in the opposite direction of the initial speed).

(b) If the woman clapped her hands together at the same speed and brought them to rest in the same time, the force would be the same. This is because the mass and the change in velocity are the same, leading to the same acceleration and, consequently, the same force. The only difference would be that the force would be exerted on the opposite hand rather than the leg.

Learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ11

The Angular momentum of the bicycle tire is 1.90 kg x [tex]m^2/s[/tex].

The formula for angular momentum of a rotating object is L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
For a hoop, the moment of inertia is I = [tex]MR^2[/tex], where M is the mass of the object and R is the radius.
Using this formula, we can find the moment of inertia of the bicycle tire:

I = [tex](1.3 kg)(0.3 m)^2[/tex] = 0.117 kg x [tex]m^2[/tex]

Next, we convert the angular speed from rpm to rad/s:

ω = (155 rpm) x (2π/60) = 16.22 rad/s

Finally, we can calculate the angular momentum:

L = Iω = (0.117 kg x [tex]m^2[/tex])(16.22 rad/s) = 1.90 kg x [tex]m^2/s[/tex]

For more questions on Angular momentum, click on:

https://brainly.com/question/4126751

#SPJ11

The bright interference fringes on the screen 5 meters away from the slits are approximately 0.013755 meters, or 13.755 mm, apart.

To find the distance between the bright interference fringes on a screen 5 meters away from the slits, you'll need to use the double-slit interference formula:

x = (λL) / d

where x is the distance between adjacent bright fringes, λ is the wavelength of the laser beam (632.4 nm), L is the distance from the slits to the screen (5 m), and d is the distance between the slits (0.230 mm).

Step 1: Convert the given measurements to meters:
λ = 632.4 nm * (1 m / 1,000,000,000 nm) = 6.324 x 10^-7 m
d = 0.230 mm * (1 m / 1,000 mm) = 2.30 x 10^-4 m

Step 2: Substitute the values into the formula:
x = (6.324 x 10^-7 m * 5 m) / (2.30 x 10^-4 m)

Step 3: Solve for x:
x ≈ 0.013755 m

So, the bright interference fringes on the screen 5 meters away from the slits are approximately 0.013755 meters, or 13.755 mm, apart.

For more information on incidental beam and slits refer to https://brainly.com/question/19167100

#SPJ11

Answer:

x = ± √(8/9) A.

Explanation:

For a simple harmonic oscillator with amplitude A and angular frequency ω, the speed at position x is given by v = ω√(A^2 - x^2).

The maximum speed occurs at the equilibrium position, where x = 0, and is given by vmax = ωA.

To determine the positions at which the speed is one-third of the maximum speed, we need to solve the equation:

v = (1/3)vmax

ω√(A^2 - x^2) = (1/3)ωA

√(A^2 - x^2) = (1/3)A

A^2 - x^2 = (1/9)A^2

8/9 A^2 = x^2

x = ± √(8/9) A

Therefore, the positions at which the speed of the simple harmonic oscillator is one-third of the maximum speed are x = ± √(8/9) A.

TheThe mole fraction of N2O4 is 1.52/(1.52 + 1) = 0.603, and the mole fraction of NO2 is 0.397.

To determine the mole fractions of N2O4 and NO2, we need to use the partial pressures of each component and the total pressure of the system.

Let x be the mole fraction of N2O4, then the mole fraction of NO2 is (1-x). The total pressure of the system is 2.96 atm, which is equal to the sum of the partial pressures of N2O4 and NO2.

From the chemical equation for the reaction of N2O4 to NO2:

N2O4(g) ⇌ 2NO2(g)

we know that the equilibrium constant Kp is equal to the partial pressure of NO2 squared, divided by the partial pressure of N2O4:

Kp = (PNO2)^2/PN2O4

At equilibrium, Kp is equal to the ratio of the product of the mole fractions of NO2 and N2O4, raised to their stoichiometric coefficients, to the product of the mole fractions of N2O4 raised to its stoichiometric coefficient:

Kp = [(1-x)^2]/x

We can rearrange this equation to solve for x:

x = [(Ptotal)(Kp)]/[1 + Kp]

Substituting the values given, we get:

x = [(2.96 atm)(4.63)]/[1 + 4.63] = 1.52 atm

Therefore, the mole fraction of N2O4 is 1.52/(1.52 + 1) = 0.603, and the mole fraction of NO2 is 0.397.

Visit to know more about Mole fraction:-

brainly.com/question/31285244

#SPJ11

Measuring current in series is essential because it ensures that the current passing through each component in the circuit is the same. In a series circuit, there is only one path for the current to flow, which means that the current measured at any point is the same throughout the entire circuit.

If you were to connect a current probe in parallel, you would create an additional path for the current to flow, which could lead to an inaccurate measurement. Connecting the probe across the resistor (opposite sides) in parallel would essentially create a short circuit, bypassing the resistor and causing a potentially dangerous situation with increased current flow, potential damage to the circuit, and an incorrect current reading.

Therefore, it's essential to measure current in series to ensure accuracy and maintain the safety of the circuit.

Learn more about current here:

https://brainly.com/question/13076734

#SPJ11

Object B has density rho₂ such that  rho₂ = 3 rho₁. From the given options, the third option is the correct one for the density.

The density of a particular thing or object is specified as its mass per unit volume. Let's assume that object A has a mass of m and a volume of V. Therefore, its density rho₁ is given by:

rho₁ = m/V

Now, object B has the same form and proportions as physical object A, but it is three times as big as the object A. This means that the mass of object B is 3m. Since the two objects have the same shape and dimensions, they have the same volume V. Therefore, the density rho₂ of object B is given by:

rho₂ = (3m)/V

Substituting m/V from the equation for rho₁, we get:

rho₂ = 3 rho₁

Therefore, the correct answer is rho₂= 3 rho₁.

Learn more about density here:

https://brainly.com/question/28464887

#SPJ1

The general solution is w(t) = C₁e^(-6t/5) + C₂te^(-6t/5).

To find the general solution to the given differential equation, 25w'' + 60w' + 36w = 0, we will first solve the characteristic equation for the given homogeneous linear differential equation.

The characteristic equation is:
25r^2 + 60r + 36 = 0

By solving for r, we can determine the general solution. In this case, we can factor the equation:
(5r + 6)(5r + 6) = 0

Since both factors are the same, we have a repeated root:
r = -6/5

Now, we can construct the general solution using the repeated root:
w(t) = C₁e^(-6t/5) + C₂te^(-6t/5)

Learn more about differential equations at https://brainly.com/question/28099315

#SPJ11

The hoop reaches a maximum height of 5.10 meters when it climbs the incline.

we need to use the principle of conservation of energy. The hoop starts with kinetic energy and converts it into potential energy as it climbs the incline. We can set the initial kinetic energy equal to the final potential energy to determine the maximum height the hoop reaches.

The initial kinetic energy of the hoop can be calculated as:

K = (1/2) ˣ m ˣ v²

where m is the mass of the hoop, v is its velocity, and K is the initial kinetic energy.

Plugging in the given values, we get:

K = (1/2) ˣ 2.0 kg ˣ (10.0 m/s)² = 100 J

The final potential energy of the hoop is given by:

U = m ˣ g ˣ h

where g is the acceleration due to gravity and h is the height the hoop reaches.

Since the hoop is rolling without slipping, the velocity of its center of mass can be related to the angular velocity of the hoop by:

v = R * w

where R is the radius of the hoop and w is its angular velocity.

Solving for the angular velocity, we get:

w = v / R = 10.0 m/s / 0.2 m = 50 rad/s

The hoop is climbing at an angle of 15 degrees, so the component of gravity acting parallel to the incline is given by:

F_parallel = m ˣ g ˣ sin(15)

Using Newton's second law, we can relate this force to the acceleration of the hoop:

F_parallel = m ˣ a

Solving for the acceleration, we get:

a = F_parallel / m = g ˣ sin(15)

Finally, we can use the conservation of energy principle to solve for the maximum height h:

K = U

(1/2)ˣ mˣ v² = m ˣ g ˣ h

h = (1/2) ˣ v² / g

Plugging in the values we calculated, we get:

h = (1/2) ˣ (10.0 m/s)² / (9.81 m/s²) = 5.10 m

Learn more about climbs incline

brainly.com/question/16958898

#SPJ11

The bridge increase at 70C is  7.7*[tex]10^{-11}[/tex]  m.  when Golden Gate Bridge  longer (in meters) would the bridge be for an increase of 70C.

With a diameter of little over three feet, 7,659 feet in length, and 27,572 parallel wires, each of the two major cables is composed. The Golden Gate employs the world's longest bridge cables, which at the equator could circle the globe more than three times.

To cross the Golden Gate Bridge, how long does it take? Walking each direction takes roughly 35 minutes because the bridge is 1.7 miles long.

Change of Length: ΔL= aΔT

[remember that the product of ΔL must then be multiplied by the length of the steel bridge (1.3K)]

To know more about Golden Gate Bridge visit:-

https://brainly.com/question/5314674

#SPJ1

the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º is approximately 6.18 x 10^-7 m.

To find the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º, we can use the equation:

d*sinθ = mλ

Where d is the distance between the two slits, θ is the angle of the first minimum (41.0º), m is the order of the minimum (in this case, m = 1), and λ is the wavelength of the violet light (405 nm = 405 x 10^-9 m).

Rearranging the equation to solve for d, we get:

d = mλ/sinθ

Plugging in the values, we get:

d = (1 * 405 x 10^-9 m) / sin(41.0º)

Using a calculator, we can evaluate sin(41.0º) to be 0.6561, so:

d = (1 * 405 x 10^-9 m) / 0.6561

d ≈ 6.18 x 10^-7 m

Therefore, the distance between two slits that produces the first minimum for 405 nm violet light at an angle of 41.0º is approximately 6.18 x 10^-7 m.

Learn more about the distance at  brainly.com/question/15172156

#SPJ11

Hi! The direction of the magnetic field at different locations around a bar magnet and an electromagnet can be predicted using the following principles:

For a bar magnet, the magnetic field lines emerge from the North pole and enter the South pole. So, at locations near the North Pole, the magnetic field direction is away from the magnet, while near the South pole, it's towards the magnet. On the sides of the bar magnet, the magnetic field lines curve from North to South.

For an electromagnet, the magnetic field direction depends on the direction of the current flowing through the coil. You can use the right-hand rule to predict the direction of the magnetic field: point your thumb in the direction of the conventional current (positive to negative), and your fingers will curl around the coil in the direction of the magnetic field lines.

So, at different locations around an electromagnet, the magnetic field direction will follow the circular path of the coil, with the field lines emerging from the North pole and entering the South pole, similar to a bar magnet.

https://brainly.com/question/31485859

#SPJ11

The analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and m2[tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], is [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

To write an analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and [tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], follow these steps:

Step 1: Understand the concept of linear momentum. Linear momentum (p) is defined as the product of an object's mass (m) and its velocity (v). Mathematically, it is expressed as [tex]p=mv[/tex].

Step 2: Identify the linear momentum of each car. For car 1, with mass [tex]m_1[/tex] and velocity [tex]v_1[/tex], the linear momentum is [tex]p_1=m_1v_1[/tex]. Similarly, for car 2, with mass [tex]m_2[/tex] and velocity [tex]v_2[/tex], the linear momentum is [tex]p_2=m_2v_2[/tex].

Step 3: Calculate the total linear momentum of the system. To find the total linear momentum, add the linear momentum of both cars: [tex]P_{total} = p_1 + p_2[/tex].

Step 4: Substitute the expressions for [tex]p_1[/tex] and [tex]p_2[/tex] from Step 2 into the equation from Step 3. The result is [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

In conclusion, the analytic expression for the total linear momentum of the system of two cars with masses [tex]m_1[/tex] and [tex]m_2[/tex], and velocities [tex]v_1[/tex] and [tex]v_2[/tex], is  [tex]P_{total} = m_1v_1 + m_2v_2[/tex].

To know more about linear momentum refer here:

https://brainly.com/question/31138302#

#SPJ11

To increase the speed of the hockey puck from v to 2v, the player must increase the distance over which he applies the same force by a factor of √2.

This is because the kinetic energy of the puck is proportional to the square of its velocity, so to double the velocity, the player must increase the kinetic energy by a factor of 2² = 4. Since work is the change in kinetic energy, the player must apply the same force over a distance that is √4 = 2 times greater in order to achieve this increase in kinetic energy, which corresponds to a velocity of 2v. Therefore, the required increase in distance is √2 times the original distance.

Learn more about speed here:https://brainly.com/question/13943409

#SPJ11

the power dissipated in w by the 23.5 ω resistors when connected in series with the rest of the circuit is 1.39 W.

To find the power dissipated by the 23.5 Ω resistors when connected in series with the rest of the circuit, we need to first calculate the total resistance of the circuit. This can be done by adding up the individual resistances in series. Once we have the total resistance, we can use Ohm's law to find the current flowing through the circuit. Finally, we can use the formula P = I^2R to calculate the power dissipated by the 23.5 Ω resistors.

Let's assume that the circuit consists of three resistors in series: R1 = 10 Ω, R2 = 23.5 Ω, and R3 = 15 Ω. The total resistance of the circuit is then:

R_total = R1 + R2 + R3 = 10 Ω + 23.5 Ω + 15 Ω = 48.5 Ω

To find the current flowing through the circuit, we can use Ohm's law:

I = V / R_total

where V is the voltage across the circuit. If we assume that V = 12 V, then:

I = 12 V / 48.5 Ω = 0.2474 A

Finally, we can use the formula P = I^2R to calculate the power dissipated by the 23.5 Ω resistors:

P = I^2R2 = (0.2474 A)^2 x 23.5 Ω = 1.39 W

Therefore, the power dissipated by the 23.5 Ω resistors when connected in series with the rest of the circuit is 1.39 W.

Learn more about power  at  brainly.com/question/29575208

#SPJ11

The object distance at which the magnification will be +0.80 for a diverging lens with a focal length of magnitude 13 cm is:

do = -21.67 cm

To solve this problem, we can use the formula for magnification:

m = -di/do

Where m is the magnification, di is the image distance, and do is the object distance.

We are given that the focal length of the lens, f, is 13 cm. For a diverging lens, the focal length is negative, so we can write:

f = -13 cm

We are also given that the magnification, m, is +0.80. Substituting these values into the formula above, we get:

0.80 = -di/do

Solving for di, we get:

di = -0.80do

Now we can use the lens equation to relate do and di:

1/do + 1/di = 1/f

Substituting the values we know, we get:

1/do + 1/(-0.80do) = 1/(-13 cm)

Simplifying and solving for do, we get:

do = -21.67 cm

However, we need to express our answer with the appropriate units, which are centimeters. Therefore, the object distance at which the magnification will be +0.80 for a diverging lens with a focal length of magnitude 13 cm is:

do = -21.67 cm

(Note that the negative sign indicates that the object is on the opposite side of the lens from the observer, which is consistent with the fact that we are dealing with a diverging lens)

For more information on lens and their focal length refer to https://brainly.com/question/25779311

#SPJ11

Answer: D. Both A and B

Explanation: A supernova is a giant explosion caused by the iron core of a star collapsing. A supernova is also a giant explosion which happens when a white dwarf exceeds 1.44 solar masses.

A supernova obviously is not the birth of the star.

On conservation of momentum:

(a) The cart goes in the opposite direction as the man does.

(b) With a speed of 0.07 m/s, the cart proceeds in the opposite direction as the guy.

(c) the cart starts moving in the forward direction with the same velocity of 0.07 m/s.

(a) As per the conservation of momentum, the total momentum of the system is conserved. Initially, the system was at rest, but when the man starts walking towards the other end, he gains some momentum in the forward direction, which the cart has to compensate for. So, the cart moves in the opposite direction to that of the man's motion.

(b) Assume that the man moves a distance of 10 m, i.e., the length of the cart.

Therefore, the total distance covered by the man is 20 m (10 m forward and 10 m backward).

The momentum gained by the man while walking forward is (70 kg) x (1.0 m/s) = 70 kg m/s.

As the total momentum of the system is conserved, the cart gains an equal and opposite momentum of -70 kg m/s.

The mass of the cart is 1,000 kg, so its velocity can be calculated using the conservation of momentum formula:

Total initial momentum = Total final momentum

0 = (70 kg) x (1.0 m/s) + (1,000 kg) x V

V = -0.07 m/s

So, the cart moves in the opposite direction to that of the man's motion with a speed of 0.07 m/s.

(c) When the guy comes to a complete halt at the back of the automobile, he loses the momentum he got while going forward, and the cart obtains equal and opposite motion. As a result, the cart begins going ahead at the same velocity of 0.07 m/s.

Find out more on Conservation of momentum here: https://brainly.com/question/7538238

#SPJ1