determine ∆s for the phase change of 2.80 moles of water from liquid to solid at 0.0 °c. (∆h = -6.01 kj/mol)

Therefore, you need 47.922 grams of [tex]Cr_{2}(SO_{4})_{3}[/tex] to prepare exactly 250 mL of a 0.490 M solution of [tex]Cr_{2}(SO_{4})_{3}[/tex].

To calculate the mass of [tex]Cr_{2}(SO_{4})_{3}[/tex] required to prepare exactly 250 mL of a 0.490 M solution of [tex]Cr_{2}(SO_{4})_{3}[/tex], follow these steps:

1. Convert the volume from mL to L: 250 mL * (1 L / 1000 mL) = 0.250 L
2. Use the formula for molarity: moles = molarity * volume
  Calculate the moles of [tex]Cr_{2}(SO_{4})_{3}[/tex]: moles = 0.490 M * 0.250 L = 0.1225 mol
3. Determine the molar mass of [tex]Cr_{2}(SO_{4})_{3}[/tex]: (2 * 51.996 g/mol for Cr) + (3 * (4 * 16.00 g/mol for O + 1 * 32.07 g/mol for S)) = 103.992 g/mol + 3 * (64 + 32.07) = 103.992 g/mol + 3 * 96.07 g/mol = 391.2 g/mol
4. Calculate the mass of [tex]Cr_{2}(SO_{4})_{3}[/tex]: mass = moles * molar mass
  Mass = 0.1225 mol * 391.2 g/mol = 47.922 g

To know more about Molarity:

https://brainly.com/question/16727614

#SPJ11

The mass of HCl required is 73 g (to two significant figures).

To find the mass of HCl, follow these steps:

1. Determine the molar mass of Zn, HCl, and ZnCl₂ using their atomic masses: Zn = 65.38 g/mol, HCl = 36.46 g/mol, ZnCl₂ = 136.32 g/mol.

2. Calculate the moles of Zn²⁺: moles of Zn²⁺ = mass of Zn²⁺/molar mass of Zn = 38 g / 65.38 g/mol ≈ 0.581 mol.

3. Use the balanced equation's stoichiometry (1:2 ratio) to find moles of HCl: moles of HCl = 2 × moles of Zn²⁺ = 2 × 0.581 mol ≈ 1.162 mol.

4. Calculate the mass of HCl: mass of HCl = moles of HCl × molar mass of HCl = 1.162 mol × 36.46 g/mol ≈ 73 g (to two significant figures).

To know more about balanced equation's click on below link:

https://brainly.com/question/7181548#

#SPJ11

Yes, the equilibrium constant of a reaction changes with temperature. This is because the reaction requires different energy at different temperatures thus the equilibrium constant changes.

In a forward endothermic reaction, the rate of reaction and thus equilibrium constant increases with a decrease in temperature similarly in a forward exothermic reaction, the equilibrium constant increases with an increase in the temperature.

An equilibrium constant doesn't change with the concentration of substrate and product or the volume of the container but does with the change in temperature. The position of equilibrium in a reaction might also change with the change in temperature.

Learn more about Equilibrium:

https://brainly.com/question/13414142

#SPJ4

The average potential energy for the ground state of the harmonic oscillator is (1/2) * ħω.

To evaluate the average potential energy ([tex]E_{potential[/tex]) for the ground state (n=0) of the harmonic oscillator, we'll use the following equation:
[tex]E_{potential} = (1/2) * m * \omega ^{2[/tex]
Here, m is the mass, ω is the angular frequency, and  is the average of the square of the position in the ground state.
The ground state wavefunction ([tex]\Psi_0[/tex]) for the harmonic oscillator is given by:
[tex]\Psi_0(x) = (\alpha /\pi )^{(1/4)} * exp(-\alpha x^2/2)[/tex]
where α = mω/ħ (ħ is the reduced Planck's constant).
To find , we integrate the product of the wavefunction and its complex conjugate, multiplied by x^2, over all space:
[tex]= \int (\Psi_0(x)) x^2 \Psi_0(x) dx[/tex]  , from -∞ to ∞
After evaluating the integral, we find:
= ħ/(2mω)
Now, substitute  back into the [tex]E_{potential[/tex] equation:
[tex]E_{potential[/tex] = (1/2) * m * [tex]\omega ^2[/tex] * (ħ/(2mω))
Simplifying this, we get:
[tex]E_{potential[/tex] = (1/2) * ħω
So, the average potential energy for the ground state of the harmonic oscillator is (1/2) * ħω.

Learn more about harmonic oscillator :

https://brainly.com/question/29471489

#SPJ11

First, we can write the balanced chemical equation for the reaction between HI and KOH: HI + KOH → KI + H2O Next, we need to determine which reagent is limiting.

Using the molarity and volume information given,  we can calculate that the number of moles of HI is 0.55 x 0.05 = 0.0275 mol, while the number of moles of KOH is 0.20 x 0.007 = 0.0014 mol. Since KOH is limiting, all of the KOH will react with HI to form KI and H2O.

The balanced chemical equation shows that the reaction produces one equivalent of H+ ion for every equivalent of KOH. Therefore, the number of moles of H+ ions produced is also 0.0014 mol.

To calculate the pH, we need to use the definition of pH: pH = -log[H+]. Therefore, pH = -log(0.0014) = 2.85.

Therefore, the pH of the resulting solution is approximately 2.85.

Learn more about  pH   here:

https://brainly.com/question/15289714

#SPJ11

The quantity in moles of NaOH needed to be added to 200.0 mL of a 0.200 M solution of HF to make a buffer with a pH of 2.80 is 2.72 x 10⁻⁵ moles of NaOH.

A buffer is a solution of a weak acid and its conjugate base, or a weak base and its conjugate acid. When making a buffer, the key is to maintain a constant pH.

In this problem, we are given that the desired pH of the buffer is 2.80, the volume of the solution is 200.0 mL, and the Ka of HF is 6.8 × 10⁻⁴.

The first step is to calculate the concentration of the HF in the solution. Since the volume is given in mL, we need to convert it to liters. This can be done by dividing 200.0 mL by 1000, giving us 0.200 L. Since the concentration is 0.200 M, we can determine the number of moles of HF in the solution by multiplying the molarity by the volume. This gives us 0.200 moles of HF.

Next, we need to calculate the concentration of the conjugate base, NaOH. The Ka of HF is 6.8 × 10⁻⁴, so we can use the Henderson-Hasselbalch equation to calculate the ratio of conjugate base to acid. This ratio is given by:

(Concentration of conjugate base) / (Concentration of acid) = Ka

Rearranging this equation gives us:

(Concentration of conjugate base) = Ka * (Concentration of acid)

Substituting the given values gives us:

(Concentration of conjugate base) = 6.8 x 10⁻⁴ * 0.200

This gives us a concentration of 1.36 x 10⁻⁴ M.

Finally, we can use this concentration to calculate the number of moles of NaOH needed to make the buffer. This is done by multiplying the concentration by the volume, giving us:

Moles of NaOH = (Concentration of conjugate base) * (Volume)

= 1.36 x 10⁻⁴ * 0.200

= 2.72 x 10⁻⁵ moles of NaOH.

Therefore, the quantity in moles of NaOH needed to be added to 200.0 mL of a 0.200 M solution of HF to make a buffer with a pH of 2.80 is 2.72 x 10⁻⁵ moles of NaOH.

For more questions related to conjugate base

https://brainly.com/question/14684465

#SPJ1

To convert moles to grams, we need to use the molar mass of benzoic acid: 0.00200 moles x 122.12 g/mol = 0.244 g So, about 0.244 grams of benzoic acid will be neutralized by 20.00 mL of the prepared NaOH solution.

Since benzoic acid and NaOH react in a 1:1 ratio, the moles of benzoic acid needed to neutralize the NaOH will be equal to the moles of NaOH.
Moles of benzoic acid = Moles of NaOH = 0.00200 moles
To find the mass of benzoic acid in grams, simply multiply the moles by its molar mass:
Mass of benzoic acid = (0.00200 moles) x (122.12 g/mol) = 0.244 g
So, you will need 0.00200 moles or 0.244 grams of benzoic acid to neutralize the 20.00 mL of prepared NaOH solution.

Learn more about moles here: https://brainly.com/question/29367909

#SPJ11

To determine if the reduction of camphor was successful, you would analyze the IR spectrum of the final product. In the IR spectrum, you would look for a disappearance of the carbonyl peak at around 1700 cm1, which indicates that the ketone group in camphor was successfully reduced to an alcohol group in the final product.

Additionally, you would look for the appearance of a new peak at around 3400 cm-1, which indicates the presence of an alcohol group.
During the camphor reduction lab, we used magnesium sulfate (MgSO4) to remove any residual water in the ether solution. MgSO4 is a hygroscopic substance, meaning that it has a strong affinity for water and can effectively remove any remaining water in the solution. This step is important because water can interfere with the reduction reaction and affect the purity of the final product.

For more such questions on camphor , click on:

https://brainly.com/question/10964215

#SPJ11

In a small test tube, when you combine about 6 drops of ammonium carbonate solution (NH4)2CO3 aq and about 6 drops of barium chloride solution BaCl2 aq, you will observe the formation of a white precipitate.

First, break up the reactants into ions:
(NH4)2CO3 aq → 2NH4+ (aq) + CO3^2- (aq)
BaCl2 aq → Ba^2+ (aq) + 2Cl- (aq)

Switch the cations:
NH4+ (aq) + Cl- (aq) → NH4Cl (aq)
Ba^2+ (aq) + CO3^2- (aq) → BaCO3 (s)

Use the criss-cross method to get the balanced formulas for the products:
NH4Cl (aq)
BaCO3 (s)

Write the balanced molecular equation for this reaction, including phase labels:
(NH4)2CO3 (aq) + BaCl2 (aq) → 2NH4Cl (aq) + BaCO3 (s)

Write the complete ionic equation for this reaction:
2NH4+ (aq) + CO3^2- (aq) + Ba^2+ (aq) + 2Cl- (aq) → 2NH4+ (aq) + 2Cl- (aq) + BaCO3 (s)

Write the net ionic equation for this reaction:
CO3^2- (aq) + Ba^2+ (aq) → BaCO3 (s)

The precipitate in this reaction is barium carbonate (BaCO3) solution, which is a white solid.

Learn more about solutions at  brainly.com/question/30620786

#SPJ11

The change in Gibbs free energy of 1.0 mol of hydrogen regarded as an ideal gas, when it is compressed isothermally from 1.0 atm to 700 atm at 298.15 K is approximately 14,466 J/mol.

To calculate the change in Gibbs free energy (ΔG) for the isothermal compression of 1.0 mol of hydrogen gas from 1.0 atm to 700 atm at 298.15 K, we can use the formula:

ΔG = nRT ln(P₂/P₁)

where n is the number of moles, R is the ideal gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and P₁ and P₂ are the initial and final pressures, respectively. Plugging in the values, we have:

ΔG = (1.0 mol) * (8.314 J/mol·K) * (298.15 K) * ln(700 atm / 1.0 atm)

ΔG ≈ 14466 J/mol

So, the change in Gibbs free energy for the isothermal compression of 1.0 mol of hydrogen gas from 1.0 atm to 700 atm at 298.15 K is approximately 14,466 J/mol.

Learn more about Gibbs free energy here: https://brainly.com/question/13765848

#SPJ11

The speed of the proton after being accelerated from rest through a 4.9×10^7 V potential difference is approximately 1.54×10^7 m/s.

To calculate the speed of a proton after being accelerated from rest through a 4.9×10^7 V potential difference, we can use the formula for the kinetic energy of a charged particle:

KE = q × V

Where q is the charge of the particle and V is the potential difference.

For a proton, q = +1.6×10^-19 C, the kinetic energy gained by the proton is:

KE = (1.6×10^-19 C) x (4.9×10^7 V)

     = 7.84×10^-12 J

Now, we can use the formula for kinetic energy to calculate the speed of the proton:

KE = (1/2)mv^2

Where m is the mass of the proton, and v is its speed. The mass of a proton is 1.67×10^-27 kg.

Substituting the values, we get:

7.84×10^-12 J = (1/2) (1.67×10^-27 kg)(v^2)

Solving for v (speed), we get:

v = √[(2 x 7.84×10^-12 J) / (1.67×10^-27 kg)]

v = 1.54×10^7 m/s

To know more about speed in an accelerating body, click on the below link:

https://brainly.com/question/19891482

#SPJ11

The pOH of pure water under the given conditions is approximately 7.93.

To find the pOH of pure water under the given conditions, you need to use the dissociation constant for water (Kw) which is 1.4×[tex]10^{-15}[/tex] at that particular temperature and pressure.

Step 1: Remember that for pure water, the concentration of H+ ions equals the concentration of OH- ions. Let's denote this concentration as x. So, [H+] = [OH-] = x.

Step 2: Use the dissociation constant formula: Kw = [H+][OH-]. Substitute the values we have: 1.4×[tex]10^{-15}[/tex] = [tex]x^{2}[/tex].

Step 3: Solve for x. x = sqrt(1.4×[tex]10^{-15}[/tex]) ≈ 1.18×[tex]10^{-8}[/tex].

Step 4: Use the pOH formula: pOH = -log[OH-]. Substitute the value of x: pOH = -log(1.18×1[tex]10^{-8}[/tex]).

Step 5: Calculate the pOH: pOH ≈ 7.93.

To know more about pOH:

https://brainly.com/question/10669518

#SPJ11

A solution that is 1.0 x 10^-1 M Ca(NO3)2 and 3.0 x 10^-5 M NaF is Ksp and a precipitate will not form. option A.

To determine if a precipitate will form, we need to compare the reaction quotient (Q) to the equilibrium constant (Ksp).

The balanced equation for the dissolution of CaF2 is:

CaF2(s) ⇌ Ca2+(aq) + 2F-(aq)

The Ksp expression is:

Ksp = [Ca2+][F-]2

At equilibrium, the concentration of Ca2+ and F- ions will be equal to x, where x is the concentration of CaF2 that dissolves. Therefore:

[Ca2+] = x
[F-] = 2x

Substituting these expressions into the Ksp equation, we get:

Ksp = x(2x)2 = 4x3

At the given concentrations of Ca(NO3)2 and NaF, the initial concentrations of Ca2+ and F- ions will be:

[Ca2+] = 1.0 x 10^-1 M
[F-] = 3.0 x 10^-5 M

Therefore, the reaction quotient Q is:

Q = [Ca2+][F-]2 = (1.0 x 10^-1)(3.0 x 10^-5)2 = 2.7 x 10^-12

Comparing Q to Ksp, we see that:

Q < Ksp

Therefore, a precipitate will not form and the answer is A.

Learn more about solution here:

https://brainly.com/question/30665317

#SPJ11

Answer:

pH = 4.90

Explanation:

Use the hassel henderbach equation:

[tex]pH = pKa + log(\frac{Conjugate Acid or Base}{Acid or Base})\\pH = -log(3.5*10^-4)+log(\frac{\frac{0.63g Naf}{45/1000L} }{0.5 M HF}) = 4.90[/tex]

In general, a polar stationary phase, such as a silica gel or alumina column, is effective for separating alcohols based on their polarity.

The stationary phase that should be chosen to separate a mixture of alcohols depends on the specific alcohols in the mixture and their properties. The appropriate stationary phase to separate a mixture of alcohols is typically a polar stationary phase, such as silica gel or polymeric sorbents. This is because alcohols are polar compounds, and in chromatography, like dissolves like. A polar stationary phase will interact more strongly with the polar alcohols, allowing for better separation.

Alternatively, a stationary phase with a high degree of cross-linking, such as a polymeric resin, can provide improved resolution and selectivity for certain alcohol mixtures. Other factors to consider include the desired separation efficiency, column length and diameter, and operating conditions such as temperature and flow rate. Ultimately, the best stationary phase for a given alcohol mixture will depend on a careful evaluation of these factors and the specific separation goals.

To know more about Column Chromatography:
https://brainly.com/question/30296545

#SPJ11

The balanced chemical equation for the thermite reaction is: Fe2O3 (s) + 2Al(s) → Al2O3 (s) + 2Fe(l)

In this reaction, solid iron (Fe) and solid aluminum oxide (Al2O3) are formed as products. The states of matter are indicated in parentheses: (s) for solid and (l) for liquid. Fe2O3(s) + 2Al(s) → Al2O3(s) + 2Fe(l)

The thermite reaction is an exothermic reaction between a metal oxide and a reducing agent, typically aluminum. The balanced chemical equation for the thermite reaction between iron(III) oxide and aluminum.

In this equation, two molecules of aluminum react with one molecule of iron(III) oxide to form two molecules of iron and one molecule of aluminum oxide, along with the release of a significant amount of heat. This reaction is commonly used in welding and pyrotechnics due to its intense heat production. It is important to note that the equation must be balanced to accurately represent the reaction, with equal numbers of each element on both sides of the equation.

To learn more about aluminum oxide click here

brainly.com/question/9496279

#SPJ11

5.2 L of NO2 can be produced from 2.6 L of O2, assuming an excess of NO and constant temperature and pressure.

For the given reaction, the volume of NO2 that can be produced from 2.6 L of O2, assuming an excess of NO and constant temperature and pressure, can be calculated using the stoichiometry of the reaction.
First, we need to know the balanced chemical equation for the reaction:
2 NO + O2 → 2 NO2
Now, we can use the stoichiometry of the reaction to determine the volume of NO2 produced:
From the balanced equation, we see that 1 mole of O2 reacts with 2 moles of NO to produce 2 moles of NO2. Since the volume ratio is equal to the mole ratio for gases at constant temperature and pressure (according to Avogadro's Law).As per Avogadro's law,

V ∝ n

V/n = k

V1/n1 = V2/n2 ( = k, as per Avogadro’s law)
Volume of O2 : Volume of NO2 = 1 : 2
Next, plug in the given volume of O2:
2.6 L O2 : Volume of NO2 = 1 : 2
To solve for the volume of NO2, we can cross-multiply:
2.6 L O2 × 2 = Volume of NO2 × 1
5.2 L = Volume of NO2
So, 5.2 L of NO2 can be produced from 2.6 L of O2, assuming an excess of NO and constant temperature and pressure.

Learn more about Temperature : https://brainly.com/question/27944554

#SPJ11

The molality of the solution is 78.11 m, which means that there are 78.11 moles of naphthalene per kilogram of benzene. The molality is a concentration unit that is defined as the number of moles of solute per kilogram of solvent.

In this case, we have 0.100 mole of naphthalene dissolved in 100. g of benzene, which is equivalent to 0.1/128.17 = 0.0007802 kg of naphthalene and 0.100/78.11 = 0.0012798 kg of benzene. Therefore, the total mass of the solution is 0.0007802 + 0.0012798 = 0.00206 kg.

To calculate the molality, we need to divide the number of moles of solute by the mass of solvent in kilograms. So, the molality is:

molality = (0.100 mol)/(0.0012798 kg) = 78.11 m

This value is a measure of the concentration of the solution and it is independent of the temperature and pressure. It is also useful in calculating other properties of the solution, such as the boiling point elevation and the freezing point depression.

To know more about molality refer here:

https://brainly.com/question/26921570#

#SPJ11

Equilibrium is a state where the forward and reverse reactions of a chemical system occur at equal rates. Le Châtelier's Principle states that a system in equilibrium will shift in response to a change in conditions to re-establish equilibrium.

In this lab report, the equilibrium system being studied is HA (aq) = H (aq) + A (aq), where HA represents the acidic form of the bromothymol blue indicator and A represents the basic form.

Upon completing Step 1, the color of bromothymol blue in distilled water was observed to be yellow. When reagent A was added in Step 2, the color changed to blue, indicating a shift toward the basic form of the indicator. Reagent A is likely a base, causing the equilibrium system to shift towards the basic form to re-establish equilibrium.

In Step 3, reagent B caused a return to the original yellow color. Reagent B is likely an acid, causing the equilibrium system to shift towards the acidic form of the indicator to re-establish equilibrium.

Overall, this lab report demonstrates the principles of Le Châtelier's Principle in action and how changes in conditions can affect equilibrium systems.

Learn more about Equilibrium here:

https://brainly.com/question/30807709

#SPJ11

The order of the mass measurements from smallest to largest is: 10 mg: This is the smallest unit of mass measurement in the given list. It is equal to 0.01 grams or 0.00001 kilograms.

10 g: This is the second smallest unit of mass measurement in the given list. It is equal to 10,000 milligrams or 0.01 kilograms.

10 kg: This is the second largest unit of mass measurement in the given list. It is equal to 10,000 grams or 10,000,000 milligrams.

10 Mg: This is the largest unit of mass measurement in the given list. It is equal to 10,000 kilograms or 10,000,000 grams.

It is important to understand the different units of mass measurement and their conversions, as they are used in many fields, such as science, engineering, and medicine, to measure and calculate the properties of objects and materials.

To know more about measurement

brainly.com/question/2107310

#SPJ11

The magnesium ion molarity for a solution with a concentration of 176.4 ppm is 7.25 x [tex]10^-^3[/tex] M, and the total hardness of a water sample containing 21.4 ppm Mg²⁺ and 51.9 ppm Ca²⁺ is 4.35 ppm of CaCO₃.

To calculate the magnesium ion molarity for a solution with a concentration of 176.4 ppm:

Convert the concentration from ppm (parts per million) to mg/L:

176.4 ppm = 176.4 mg/L

Calculate the molar mass of Mg²⁺:

Mg²⁺ has a molar mass of 24.31 g/mol

Calculate the number of moles of Mg²⁺ in 1 L of the solution:

176.4 mg/L / 24.31 g/mol = 7.25 x [tex]10^-^3[/tex] mol/L

So the magnesium ion molarity is 7.25 x [tex]10^-^3[/tex] M.

To calculate the hardness of a water sample containing 21.4 ppm Mg²⁺ and 51.9 ppm Ca²⁺:

Convert the concentrations from ppm to mg/L:

21.4 ppm Mg²⁺ = 21.4 mg/L

51.9 ppm Ca²⁺ = 51.9 mg/L

Calculate the equivalent concentration of each ion in the water sample:

One mole of Mg²⁺ or Ca²⁺ ions will react with two moles of the complexing agent used in the hardness test. Therefore, the equivalent concentration of each ion is calculated by dividing the concentration (in mg/L) by the ion's equivalent weight:

Equivalent weight of Mg²⁺ = 12.16 g/mol

Equivalent weight of Ca²⁺ = 20.04 g/mol

Equivalent concentration of Mg²⁺ = 21.4 mg/L / 12.16 g/mol = 1.76 equivalent ppm

Equivalent concentration of Ca²⁺ = 51.9 mg/L / 20.04 g/mol = 2.59 equivalent ppm

Calculate the total hardness of the water sample:

Total hardness = equivalent concentration of Mg2² ⁺ equivalent concentration of Ca⁺

Total hardness = 1.76 equivalent ppm + 2.59 equivalent ppm = 4.35 equivalent ppm

Convert the total hardness from equivalent ppm to ppm of CaCO₃:

1 equivalent ppm = 1 mg/L of CaCO3

So, the total hardness of the water sample is 4.35 ppm of CaCO₃.

Learn more about Magnesium ion molarity

brainly.com/question/15440029

#SPJ11

The pH of a solution that is 0.085 M in HNO₃ and 0.15 M in HBrO is approximately 1.07.

To calculate the pH of this solution, first recognize that HNO₃ is a strong acid and will fully dissociate, while HBrO is a weak acid. For HNO₃, the [H⁺] concentration is 0.085 M. Next, apply the Ka expression for HBrO: Ka = [H⁺][BrO⁻] / [HBrO].

Plug in the given Ka value (2.3 x 10⁻⁹) and the initial concentration of HBrO (0.15 M). Since [H⁺] from HNO₃ is much larger than what HBrO will contribute, you can approximate [H⁺] to be 0.085 M. Solve for [BrO⁻], which is approximately 3.22 x 10⁻⁹ M.

Finally, calculate the pH using the formula pH = -log([H⁺]). The pH of the solution is approximately 1.07.

To know more about strong acid click on below link:

https://brainly.com/question/8743052#

#SPJ11

(a) pH an aqueous solution of 0.083 M HCl at 25°C is 1.08.

(b) pH of an aqueous solution 7.3 × [tex]10^-^3[/tex] M HNO₃ at 25°C is 2.14.

(c) pH of an aqueous solution 3.1 × [tex]10^-^6[/tex] M HClO₄ at 25°C is 2.26.

(a) For 0.083 M HCl, we can assume that all of the HCl will dissociate in water, so the concentration of H⁺ ions is equal to the concentration of HCl. Therefore, [H⁺] = 0.083 M.

To find the pH, we use the equation: pH = -log[H⁺].

pH = -log(0.083) = 1.08

Therefore, the pH of the solution is 1.08.

(b) For 7.3 × [tex]10^-^3[/tex] M HNO₃, we can also assume complete dissociation of HNO₃. Therefore, [H⁺] = [NO₃⁻] = 7.3 × [tex]10^-^3[/tex] M.

pH = -log(7.3 × [tex]10^-^3[/tex]) = 2.14

Therefore, the pH of the solution is 2.14.

(c) For 3.1 × [tex]10^-^6[/tex] M HClO₄, we need to take into account the fact that HClO₄ is a strong acid, but it is not completely dissociated in water. The dissociation constant (Ka) of HClO₄ is 7.5 × [tex]10^-^1[/tex]. Therefore, we can assume that [H⁺] = [ClO₄⁻] = x (where x is the concentration of H⁺ ions).

Using the equation for the dissociation constant of an acid (Ka = [H⁺][ClO₄⁻]/[HClO₄]), we can write:

7.5 × [tex]10^-^1[/tex] = x²/3.1 × [tex]10^-^6[/tex]

Solving for x, we get:

x = 5.45 × [tex]10^-^3[/tex] M

pH = -log(5.45 × [tex]10^-^3[/tex]) = 2.26

Therefore, the pH of the solution is 2.26.

Learn more about pH

brainly.com/question/1625945

#SPJ11

To determine the pH of a solution of NaN3, we need to first consider the dissociation of HN3, the acid form of NaN3, in water. The equilibrium equation for the dissociation of HN3 is:

HN3 + H2O ⇌ H3O+ + N3-

The acid dissociation constant, Ka, for HN3 is given as 1.9 × 10−5. This means that at equilibrium, the concentration of H3O+ and N3- can be determined using the following equation:

Ka = [H3O+][N3-]/[HN3]

Since NaN3 is a salt, it dissociates completely in water to form Na+ and N3-. However, N3- can react with water to form HN3 and OH-. Therefore, the concentration of HN3 can be determined using the equilibrium equation for the reaction of N3- with water:

N3- + H2O ⇌ HN3 + OH-

The equilibrium constant for this reaction is Kw/Ka, where Kw is the ion product constant of water and has a value of 1.0 × 10^-14 at 25°C.

Kw/Ka = (1.0 × 10^-14)/(1.9 × 10^-5) = 5.26 × 10^-10

Let x be the concentration of HN3 and [OH-] be the concentration of hydroxide ions. Then the concentration of N3- is also x, and the concentration of H3O+ is (Ka/x). Using the equilibrium constant expression for the reaction of N3- with water, we have:

Kw/Ka = [HN3][OH-]/[N3-]

Substituting the values for Kw/Ka and the concentrations of HN3 and N3-, we get:

5.26 × 10^-10 = [(Ka/x)(x + [OH-])]/x

Simplifying and rearranging the equation, we get:

x^2 + Ka[OH-] - Kw = 0

Substituting the values for Ka and Kw, we get:

x^2 + (1.9 × 10^-5)[OH-] - 1.0 × 10^-14 = 0

Solving for [OH-], we get:

[OH-] = (−Ka ± √(Ka^2 + 4Kw))/2 = (−1.9 × 10^-5 ± √(1.9 × 10^-5)^2 + 4(1.0 × 10^-14))/2

Taking the positive value of [OH-] (since pH = -log[H3O+], and [OH-][H3O+] = Kw), we get:

[OH-] = 2.4 × 10^-6 M

The pH of the solution can be calculated as:

pH = -log[H3O+] = -log(Ka/[OH-]) = -log(1.9 × 10^-5/[2.4 × 10^-6]) = 3.58

Therefore, the pH of a 0.681 M solution of NaN3 is approximately 3.58.

Click the below link, to learn more about pH of solution:

https://brainly.com/question/12482336?

#SPJ11"

Since [C9H8NO3^-] = [H^+], the concentration of C9H8NO3^- is also 2.2 x 10^-4 M.

Hippuric acid has the chemical formula C9H8NO3 and dissociates in water to form C9H8NO3^- and H^+ ions. The dissociation reaction is as follows:

C9H8NO3 (aq) ⇌ C9H8NO3^- (aq) + H^+ (aq)

The concentration of C9H8NO3^- can be calculated using the equilibrium constant expression for the dissociation reaction:

K_a = [C9H8NO3^-][H^+]/[C9H8NO3]

where K_a is the acid dissociation constant of hippuric acid.

At equilibrium, the concentration of C9H8NO3^- is equal to the concentration of H^+, since one C9H8NO3^- ion is produced for each H^+ ion. Therefore:

[C9H8NO3^-] = [H^+]

We can then rearrange the equilibrium constant expression to solve for [C9H8NO3^-]:

[C9H8NO3^-] = K_a[C9H8NO3]/[H^+]

The acid dissociation constant, K_a, for hippuric acid is 1.4 x 10^-5 at 25°C. We can assume that the dissociation of hippuric acid is negligible compared to its initial concentration of 0.190 M, so we can use the initial concentration of hippuric acid as [C9H8NO3] and solve for [H^+]:

K_a = [C9H8NO3^-][H^+]/[C9H8NO3]
1.4 x 10^-5 = [H^+]^2/0.190
[H^+] = 2.2 x 10^-4 M

Since [C9H8NO3^-] = [H^+], the concentration of C9H8NO3^- is also 2.2 x 10^-4 M.

Visit to know more about Concentration:-

brainly.com/question/26255204

#SPJ11

NiCO₃, which is nickel(II) carbonate, has a Ksp of 1.42 x 10⁻⁷. Determine the compound's molar solubility, S. NiCO₃(s) + Ni₂₊ + CO₃²⁻(aq) chemical reaction. Ksp = 1.42·10⁻⁷.

The equilibrium constant for a solid material dissolving in an aqueous solution is the solubility product constant, Ksp. It stands for the degree of solute dissolution in solution. A substance's Ksp value increases with how soluble it is.

NiCO₃, the nickel(II) carbonate, has the following Ksp expression:

Ksp = [Ni₂₊][CO₃²⁻]

where [Ni₂₊] and [CO₃²⁻] are the concentrations of nickel and carbonate ions, respectively, in the solution.

Fe(OH)₂, the iron(II) hydroxide, has the following Ksp expression:

Ksp = [Fe₂₊][OH⁻]²

where [Fe₂₊] denotes the amount of iron(II) ions in the solution and [OH⁻] denotes the amount of hydroxide ions in the solution.

To know more about solubility visit:-

https://brainly.com/question/28170449

#SPJ1

a) The values are q = 2199 J, w = -1099 J, ΔU = 1100 J, ΔH = 2199 J, ΔS = 6.33 J/K
b) The values are q = 1100 J, w = 0 J, ΔU = 1100 J, ΔH = 2199 J, ΔS = 3.19 J/K
c) The values are q = 685 J, w = 685 J, ΔU = 0 J, ΔH = 0 J, ΔS = 2.21 J/K


a) For constant pressure heating, q = nCpΔT = (2.25)(5/2R)(675-310), w = -PextΔV = -nRΔT, ΔU = q - w, ΔH = nCpΔT, ΔS = q/T2 - q/T1

b) For constant volume heating, q = nCvΔT = (2.25)(3/2R)(675-310), w = 0, ΔU = q, ΔH = nCpΔT, ΔS = q/T2 - q/T1

c) For reversible isothermal expansion, q = w = nRTln(P1/P2), ΔU = ΔH = 0, ΔS = nRln(V2/V1)

To know more about isothermal expansion click on below link:

https://brainly.com/question/4674503#

#SPJ11

The volume in mL of 0.202 M KOH(aq) needed to reach the equivalence point in the titration of 34.27 mL of 0.184 M C₆HOH(aq) is 31.14 mL.

To determine the volume in mL of 0.202 M KOH(aq) needed to reach the equivalence point in the titration of 34.27 mL of 0.184 M C₆H₅OH(aq), you can use the stoichiometric relationship between the reactants.

C₆H₅OH + KOH → C₆H₅O⁻ + H₂O

At the equivalence point, the moles of KOH will equal the moles of C₆H₅OH. You can use the formula:

moles of C₆H₅OH = moles of KOH

(34.27 mL)(0.184 mol/L) = (volume of KOH)(0.202 mol/L)

Solve for the volume of KOH:

volume of KOH = (34.27 mL)(0.184 mol/L) / (0.202 mol/L) ≈ 31.14 mL

Therefore, 31.14 mL of 0.202 M KOH(aq) is needed to reach the equivalence point in the titration of 34.27 mL of 0.184 M C₆H₅OH(aq).

Learn more about equivalence point: https://brainly.com/question/31375551

#SPJ11

Mechanism: Electrophilic substitution via protonation and deprotonation with the aid of D2SO4, leading to gradual replacement of benzene hydrogens by deuterium.

D2SO4 serves as a source of the electrophilic H+ ion, which attacks the electron-rich benzene ring, forming a sigma complex. The sigma complex then undergoes deuterium substitution, facilitated by the presence of excess D2SO4 and the acidic environment. This process repeats until all the hydrogens on the benzene ring have been replaced by deuterium, resulting in the formation of fully deuterated benzene (hexadeuterobenzene).

Learn more about hydrogens here:

https://brainly.com/question/28937951

#SPJ11

The solution has a molality of 0.658 mol/kg.

The amount of moles of solute per kilogram of solvent is known as molality (m).

We must first determine the number of moles of NaI3 in the solution in order to determine the molality of a solution containing 314 grams of NaI3 in 1.18 kilograms of water.

The formula below can be used to determine NaI3's molar mass:

Na: 1 x 22.99 = 22.99 g/mol

I: 3 x 126.90 = 380.70 g/mol

Total molar mass: 22.99 + 380.70 = 403.69 g/mol

The number of moles of NaI3 in the solution is therefore:

moles = mass/molar mass

moles = 314 g/403.69 g/mol

moles = 0.7786 mol

Next, we need to calculate the mass of water in the solution:

mass of water = 1.18 kg = 1180 g

Finally, we can determine the solution's molality:

molality = moles of solute/mass of solvent (in kg)

molality = 0.7786 mol/1.18 kg

molality = 0.658 mol/kg

Therefore, The solution has a molality of 0.658 mol/kg.

Learn more about molality here : brainly.com/question/24065939

#SPJ1