The angles for the first-order diffraction of the shortest and longest wavelengths of visible light are 22.33 ⁰ and 49.46 ⁰ respectively.
Angle for the first order diffractionThe angle for the first order diffraction is calculated as follows;
dsinθ = mλ
sinθ = mλ/d
For shortest wavelength (λ = 380 nm)d = 1/10,000 lines/cm
d = 1 x 10⁻⁴ cm x 10⁻² m/cm = 1 x 10⁻⁶ m/lines
sinθ = (1 x 380 x 10⁻⁹)/(1 x 10⁻⁶)
sinθ = 0.38
θ = sin⁻¹(0.38)
θ = 22.33 ⁰
For longest wavelength (λ = 760 nm)sinθ = (1 x 760 x 10⁻⁹)/(1 x 10⁻⁶)
sinθ = 0.76
θ = sin⁻¹(0.76)
θ = 49.46 ⁰
Learn more about diffraction here: https://brainly.com/question/16749356
#SPJ1
The weight of a body is 147N. what is its mass?
To find the mass, with only the weight:
⇒ must consider the relationship between the mass and weight
⇒ (in other words) we must find the equation that has both the
mass and weight
Based on our physics knowledge, we know:
[tex]Weight=mass*gravitational_. acceleration[/tex]
Weight: 147NGravitational Acceleration: 9.8 m/s²Now let's plug in the values, and solve:
[tex]147N = mass*9.8_.m/s^2\\mass = 15_.kg[/tex]
Answer: 15 kg
Hope that helps!
*as a note, if you use the gravitational acceleration as 10m/s², then the answer would be 14.7 kg
True or False: A sound wave causes particles of air to travel from the source of sound (e.g., the speaker) to the listener's ear. Explain your answer.
It is True that A sound wave causes particles of air to travel from the source of sound (e.g., the speaker) to the listener's ear : This is because of the collision of the air particles that is caused by the wave.
Meaning of sound waveA sound wave can be defined as first a mechanical wave because it needs a medium to propagate.
A sound wave is an acoustic disturbance that is caused by the movement of energy traveling through a medium that is air, water etc.
In conclusion, It is True that A sound wave causes particles of air to travel from the source of sound (e.g., the speaker) to the listener's ear : This is because of the collision of the air particles that is caused by the wave.
Learn more about Sound wave: https://brainly.com/question/1199084
#SPJ1
The student measured the extension for five different forces rather than just measuring the extension for one force. Suggest why.
The student measured the extension for five different forces rather than just measuring the extension for one force to identify anomalies. This is further explained below.
What is measurement?Generally, measurement is simply defined as the process of determining the size of something.
In conclusion, The student took five separate measurements of extension for various forces in order to better detect any discrepancies.
Read more about measurement
https://brainly.com/question/3780384
#SPJ1
under the "law of effect" what was observed?
Answer:
those behavioural responses that were most closely followed by a satisfying result were most likely to become established patterns and to occur again in response to the same stimulus.
Explanation:
Engineers are trying to improve a race car. Their goal is to increase the acceleration of the car using the same engine. Which change shows the best application of Newton’s laws of motion to achieve this goal?
increasing the inertia of the car
decreasing the reaction force
increasing the action force
decreasing the mass of the car
Answer:
increasing the inertia of the car
Why can we see the moon at
night?
a. the moon is luminous and produces its own
light.
b. light from the earth is reflected back to us off
of the moon.
c. light from the sun is reflected back to us off
the moon
d. light from the sun is absorbed by the moon.
Answer:
c. light from the sun is reflected back to us off the moon
Explanation:
the moon does not produce its own light
How does gravity relate to potential energy?
Answer:
the potential energy a massive object has in relation to another massive object due to gravity
Answer:
PE uses the acceleration of gravity in its calculation definition
Explanation:
Potential Energy = mass * acceleration of gravity * height
How many million kilometers is one astronomical unit.
Answer:
150 million kilometres
Explanation:
The astronomical unit (symbol: au, or AU or AU) is a unit of length, roughly the distance from Earth to the Sun and equal to 150 million kilometres (93 million miles) or 8.3 light minutes.
Discuss the 3 most important lessons you learned in this class. explain why they were so meaningful? how will critical thinking help you "realize potential-the ultimate objective"?
The three most important lessons learned in the school are never cheat, make less but selfless friends and respect teachers.
What is critical thinking?
Critical thinking is the action done by the person that has a wide range of thinking skills that eventually leads to a desired outcome.
The important lessons one learn being in schools that are crucial forr the whole life are never cheat, make less but selfless friends and respect teachers.
Critical thinking makes one realize his inner potential. The potential is the desired outcome and it is the final objective of the person.
Learn more about Critical thinking.
https://brainly.com/question/12980631
#SPJ1
The fastest train in the world moves at 500 km/hr. How far will it go in 3 hours?
Answer:
1500 because i aded 500+500+500= 1500 km/hr thats how i got my answer
Explanation:
Answer:
1500 kmh
Explanation:
500+500+500 making it 1500
Which three factors are used to calculate gravitational potential energy?
A. The height of an object
Jury
B. The mass of an object
C. The chemical formula for an object
D. The velocity of an object
E. The acceleration of an object due to gravity
F. The density of an object
Answer:
Height, mass, acceleration.
Explanation:
I hope it helps u dear! ^_^
This photograph shows a person using a type of wave technology. Which need or want does this technology meet?
A. It allows people to check their sense of touch.
B. It allows people to see very distant objects clearly.
C. It allows people to check their eyesight.
D. It allows people to see very small objects clearly.
The photography that shows a person using a type of wave technology, allows people to see very small objects clearly. D as it is a microscope
Why are wave technologies important?
Wave technologies are important because;
They create waves that are more perfect than humans can provide by themselves.Certain inventions use waves to enhance human senses like hearing, sight and touch.Thus, the photography that shows a person using a type of wave technology, allows people to see very small objects clearly. D as it is a microscope.
Learn more about microscope here:
https://brainly.com/question/1444040
#SPJ1
A) the wind is blowing directly towards the wind turbine at a speed of 12 m/s. at this wind
speed, 7500 kg of air passes every second through the circular area swept out by the
blades.
() calculate the kinetic energy of the air travelling at 12m/s, which passes through
the circular area in 1 second.
The kinetic energy of the air travelling at 12m/s, which passes through
the circular area in 1 second is 5.4 x 10⁵ J.
What is kinetic energy?The kinetic energy of an object is associated with its motion. It can be related to the mass and velocity as
K.E = 1/2 mv²
Given the wind is blowing directly towards the wind turbine at a speed of 12 m/s. At this wind speed, 7500 kg of air passes every second through the circular area swept out by the blades.
Substitute the values, we have
K.E = 1/2 x 7500 x (12)²
K.E = 5.4 x 10⁵ J
Hence, the kinetic energy of the air travelling at 12m/s, which passes through the circular area is 5.4 x 10⁵ J.
Learn more about kinetic energy.
https://brainly.com/question/12669551
#SPJ1
what kind of intermolecular force is H2O
Answer: H2O has hydrogen bonds, dipole-induced dipole forces, and London dispersion forces.
Explanation:
Answer:
The H2O water molecule is polar with intermolecular dipole-dipole hydrogen bonds. As the water molecules attract each other and form bonds, water displays properties such as high surface tension and a high heat of vaporization
A good long distance runner has an average speed of 5.5m/a. How far would the runner go in 30 mins
Explanation:
if the runner maintains an average speed of 5.5 m/s
we can use the formula
vt = d
hence the answer would be:
5.5 × (30 × 60)
note: we have to convert meter to second which is the SI unit.
answer: 4950 meters
why do you think spiders are disliked
Answer:
it is called arachnophobia
Explanation:
most reason are they way they walk and jump and the people who know they have 4 eyes
Hope This Helped i Like Spiders (^^vv^^) (spider smiley face)
Answer:
why do you think spiders are disliked?The presence of body hair seems to be significantly associated with both fear and disgust of spiders (Davey, 1991). We suggest that the rationale for this perception (fear of hairiness) is that body hair (or fur) when standing up in many mammals occur when the animal is threatened.
Explanation:
Always remember:beluga always love answer your question by following these steps:Follow belugaask meBrainliest me first oktake note please: everyone i answer question I got happy:)please don't delete Your question beacause Brainliest Marks & pointswill be loseNeed help asap please!
what produces the emf in an electric generator?
a coil rotating in a magnetic field to change its flux
an electric current in a coil that produces a torque on the coil to make it rotate
an electric battery
the repulsion between a positive charge and the north pole of a magnet
Answer:
a coil rotating in a magnetic field to change its flux
As stream discharge increases ________. only velocity increases velocity, width, and depth increase velocity, width, and depth decrease only depth increases
As stream discharge increases, only velocity increases.
What is discharge?The discharge or volume flow rate is defined as the product of the velocity of the fluid and the area of cross- section of the pipe or tube.
Discharge Q = Area A x Velocity V
Q = AV
The discharge is directly proportional to the velocity of the fluid. When discharge increases, velocity is the only physical quantity that can be changed.
Thus, As stream discharge increases, only velocity increases.
Learn more about discharge.
https://brainly.com/question/25727077
#SPJ1
Six students each make an electromagnet for an investigation. Each student wraps copper wire around a nail and attaches each end of the wire to a 9-volt battery. The students use their electromagnets to pick up paper clips. The table shows the number of paper clips each student picks up with their electromagnet.
a) Write one question about how the electromagnets were made that the students could answer that would help explain the differences in the numbers of paper clips picked up by the electromagnets. Explain your reasoning.
b) Identify one factor, other than how the electromagnets were made, that would affect the number of paper clips picked up by the electromagnet. Explain your reasoning.
The question on how electromagnets are produced that students may answer to help explain the disparities in the quantity of paper clips taken up by the electromagnets "What is the strength of electromagnet”
What is static electricity?The imbalance of electric charges within or on the surface of a substance, or between materials, is known as static electricity.
Static electricity is generated by Van de Graaff generators. Static does not include acceleration, implying that it is stationary, which pertains to the formation of electric charges.
a)The question on how electromagnets are produced that students may answer to help explain the disparities in the quantity of paper clips taken up by the electromagnets "What is the strength of electromagnet”
b)The one factor, other than how the electromagnets were manufactured, that influences the quantity of paper clips the electromagnet picks up will be electrostatics.
Hence,the whole activity is about the electromagnets.
To learn more about static electricity refer:
https://brainly.com/question/12791045
#SPJ1
when a metal sphere is dropped in to a tall cylinder containing liquid its acceleration is g÷2 (gravity over 2) show that : density of metal =2density of liquid
The density of the metal is twice the density of liquid since acceleration, a is half of accelerating due to gravity, g.
What is the relationship between acceleration and density?For a solid falling through a viscous fluid, the acceleration of the object decreases until it attains terminal velocity.
The acceleration of the body increases with increase in density of the solid.
When density of solid = density of liquid, acceleration a = g
When density of solid = 2 × density of the liquid, acceleration a = g/2.
Therefore, the density of the metal is twice the density of liquid since acceleration, a is half of accelerating due to gravity, g.
Learn more about density and acceleration at: https://brainly.com/question/1156422
#SPJ1
jennifer is pulling her little brother, michael, by the hand because she wants to leave the zoo, but he cant stop crying and wanting to see the monkeys. she applies a force of 35 N and the force of her brother is 20 N
is jennifer able to drag her brother out of the zoo? how do u know
what is the total net force...show your work
draw a force schema. label ALL components and draw vector quantities that include the direction and amount of force
Jennifer is able to drag her brother out of the zoo due to an applied net force of 15 N.
What is force?Force refers to any agent which tends to cause a change in the motion or state of an object.
Forces are of two types;
contact forces, and Non-contact forcesThe net force is the difference between two forces which causes a change in the motion of an object.
The net force that Jennifer applies = 35 N - 20 N = 15 N
Therefore, Jennifer is able to drag her brother out of the zoo due to an applied net force of 15 N.
Learn more about Net force at: https://brainly.com/question/141439
#SPJ1
A boy throws a toy up in the air with an initial velocity of 7.9 m/s at an angle of 37 degrees . what is the maximum height reached by the toy?
The maximum height reached by the toy at the given velocity and angle of projection is determined as 1.15 m.
Maximum height reached by the toyThe maximum height reached by the toy is calculated as follows;
H = u²sin²θ/2g
where;
u is the initial velocityθ is the angle of projectiong is gravityH = (7.9² x (sin37)²)/(2 x 9.8)
H = 1.15 m
Thus, the maximum height reached by the toy at the given velocity and angle of projection is determined as 1.15 m.
Learn more about maximum height here: https://brainly.com/question/12446886
#SPJ1
The quarks that compose a baryon may have charges of.
The quarks that compose a baryon may have negative and positive charges of +(2/3)e, -(1/3)e.
What is a quark?A quark is a type of particle that forms protons and neutrons and combines to generate particles called hadrons.
Protons and neutrons may be formed by up quarks and down quarks that have a charge equal to -1/3e.
In conclusion, the quarks that compose a baryon may have negative and positive charges of +(2/3)e, -(1/3)e.
Learn more about quarks here:
https://brainly.com/question/1472008
#SPJ1
Gravity and magnetism are both
A common forces
B natural cycles
C states of matter
D forms of energy
Answer:
Explanation:
Comment
You have to read this carefully enough that you don't mix up energy and forces.
Gravity is a force. If you don't believe me try jumping off a building. Which way are you going to go and why? Down because gravity attracts your mass.
So Magnetism must be a force as well. It acts in one direction, but not a specific one the way gravity acts). It also either attracts or repulses (pushes an object away)
Answer A
HELPPPPP PLEASEEEEEE
How can biomass energy use improve water quality? a. the combustion of biomass material to produce energy improves water quality by filtering out pollutants. b. biomass energy use does not require water, which reduces the impact of other energy producing technologies on water quality. c. soil erosion and sedimentation are decreased during biomass crop growth. d. all of the above please select the best answer from the choices provided a b c d
The biomass energy can use improve water quality in soil erosion and sedimentation are decreased during biomass crop growth. The correct option is C.
What is biomass energy?Biomass energy is obtained by the processing of the dead plants and animal or vegetable, cow dung or wood.
The biomass energy obtained by these bio things, it is enriched with the nutrients required by the new crop plants to grow effectively.
The biomass energy provides good water quality by soil erosion and sedimentation.
Thus, The correct option is C.
Learn more about biomass energy.
https://brainly.com/question/2292559
#SPJ1
An object that is initially not rotating has a constant torque of 3.6 N⋅m applied to it. The object has a moment of inertia of 6 kg⋅m2.What is the magnitude of the angular acceleration of the object?
[Please answer if you know]
Answer:
0.6
Explanation:
Angular acceleration is equal to Net Torque divided by rotational inertia, which is the rotational equivalent to Newton’s 2nd Law. Therefore, angular acceleration is equal to 3.6/6 which is 0.6. Hope this helped!
4. A lens has a focal length of 2m. A pencil is placed 3m from the lens.
a. Where will the image of the pencil be formed? (show all work) (3 marks)
I
b. Is the image inverted or upright? How do you know? (1 mark)
(a) The distance of the image of the pencil from the lens is determined as 6 m.
(b) The image formed is upright, because it is magnified.
Image distance
The distance of the image formed is determined by applying lens formula as shown below;
1/f = 1/v + 1/u
1/v = 1/f - 1/u
1/v = 1/2 - 1/3
1/v = (3 - 2)/6
1/v = 1/6
v = 6 m
Magnification of the imageM = v/u
M = 6/3
M = 2
A convex lens forms an upright and magnified image.
Learn more about image distance here: https://brainly.com/question/2854969
#SPJ1
To help you rank the reactivity of the three metals you will be creating atomic charge models for each of the elements. You may use the periodic table as a model to help you complete these individual models.
1. Complete the atomic charge models to show the charged substructure of sodium, magnesium and potassium.
Metals tend to readily lose electrons and form cations. Most of them react with atmospheric oxygen to form metal oxides. However, different metals have different reactivities towards oxygen (unreactive metals such as gold and platinum do not readily form oxides when exposed to air
For sodium
Nucleus =11+Core electrons=10-Valence electrons=1-For Magnesium
Nucleus=12+Core electrons=10-Valence electrons=2-For potassium
Nucleus=19+Core electrons=18-Valence electrons=1-Which SI units are used to describe energy
Answer:
The SI units used to describe energy is Joule (J)