Erwin Schrödinger developed the quantum model of the atom. What scientific knowledge was necessary for Schrödinger’s work?

Answers

Answer 1

The scientific knowledge was necessary for Schrödinger’s work is the discoverd of electron.

What is electron and how was it discovered?

Thomson carried out new experiments that led him to conclude that cathode rays were formed by particles that have a negative charge. Later, Thomson proved that these rays were deflected by applying an electric field. Thus, these particles were called electrons.

The discovery of the electron allowed Schrodinger to explain quantum models that are based on how electrons behave.

See more about quantum model at brainly.com/question/13352063

#SPJ1


Related Questions

A rock is dropped from a bridge to the water below. It takes 2.40 s for the rock to hit the water (a) find the speed in m/s of the rock as it hits the water. (b) how high in metres is the bridge above the water

Answers

Answer: I think Its the Height is 11.76 Meters (38.582677 Feet) between the bridge and the ground

Explanation: Supposing that where not counting air resistance in the equation, the equation [tex]D = ut+\frac{1}{2} at^{2}[/tex] states that 1/2 multiplied by earths gravitational acceleration multiplied by the amount of time to reach the bottom: 2.4 seconds equals 11.76 meters of height between the bridge and the ground.

Is the ability to discriminate between two close objects.

Answers

Answer:

resolution

Explanation:

  That is the definition of resolution

The graph below shows the conservation of energy for a skydiver jumping out
of a plane and landing safely on the ground. Which energy is represented by
line C?

Answers

Answer:

Kinetic energy

Explanation:

A car of mass 500 kg is moving at a speed of 1.2 m/s. A man pushes the car, increasing the speed to 2 m/s. How much work did the man do?
A. 1360 J
B. 360 J
C. 640 J
D. 1000 J​

Answers

Answer:

Option B - 360 J

Explanation:

One of the formulas used to find out how much work was done is :

E = 0.5×m×v² (where m is the mass and v is the velocity)

Now we substitute values from the question and simplify :

E = 0.5×500×1.2²

E = 250×1.2²

E = 250×1.44

E = 360 J

So our answer is Option B

Hope this helped and have a good day

how much force is required to accelerate an 8.6kg wagon by 15 m/s ?

Answers

The amount of force required to accelerate the given mass of the wagon is 129 Newtons.

What is force?

A force is simply referred to as either a push or pull of an object resulting from the object's interaction with another object.

From Newton's Second Law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration.

Given the data in the question;

Mass of the rock m = 8.6kgAcceleration a = 15m/s²Force F = ?

F = 8.6kg × 15m/s²

F = 129kgm/s²

F = 129N

Therefore the amount of force required to accelerate the given mass of the wagon is 129 Newtons.

Learn more about force here: brainly.com/question/27196358

#SPJ1

which image shows an example of kinetic energy

Answers

Answer:

Hello there seems to be no Images in this question but Kinetic energy is a push or a pull force which has to do with motion if you just need to know what t is. Next time be sure to add the pictures for it.

Explanation:

Thank you!

Hello the other person (#Sonichj123), was indeed correct there appears to be no picture in your question. Although there is no picture in your question, If you have another question I will be gladly to help you!

Explanation:

Thank you so much! (≥ФωФ≤)

Classify each characteristic as either a metal or a nonmetal.
shiny surface
dull surface
good conductor of electricity
good conductor of heat
poor conductor of electricity
poor conductor of heat
malleable
brittle

Answers

Answer:

metal, non, metal, metal, non, non, metal, non

Explanation:

knowledge

why do electrons flow threw a wire

Answers

Answer:

When electric voltage is applied, an electric field within the metal triggers the movement of the electrons, making them shift from one end to another end of the conductor. Electrons will move toward the positive side.

A 10.0-kg test rocket is fired vertically. When the engine stops firing, the rocket’s kinetic energy is 1960 J. After the fuel is burned, to what additional height will the rocket rise?

Answers

Answer:

20m

Explanation:

So the formula for PE(Potential Energy) = Mass x Acceleration x Height

So we are given the following

PE = 1960

Mass = 10Kg

Acceleration = 9.8m/s^2 (The reason we have an acceleration is due to gravity)

Height = ?

So to calculate height we will use the same formula

1960 = 10 x 9.8 x h

1960 = 98 x h

1960 = 98h

we divide 98 on both sides

H = 20m

Hope this helped.

when the cross product of vector A and B are 2i+3j+4k and the sum of vector A and B are 3i+8j+7k then what will be the two vectors​

Answers

Explanation:

the two vectors are 5i+11j+11k

When a force of 450N pushes on a 20kg box as
shown, the acceleration of the box up the incline is
0.70m/s2. Find the coefficient of sliding friction
between the box and the incline.

Answers

Answer:

ma+mgsinh0​+f=F∴(25)(0.75)+(25)(10)sinh0​+μk​N=F∴18.75+(250)(0.6h)+μk​(mgcosh0​=F⟹18.75+150+μk​((25)(10)(0.76))=500∴168.75+μk​(190)=500⟹μk​(190)=331.25⟹μk​=1.74

Explanation:

Of the following, which is the best reason for why a woman's risk for cardiovascular disease increases after menopause?

Answers

Answer:

The best reason for the increased risk of cardiovascular diseases in women after menopause is the significant decrease in the levels of Estrogen in the body.

Detailed answer:

Due to the approach of menopause the estrogen levels in the blood decrease drastically. Estrogen helps in relaxing the vessels and keeping them in their natural diameter. But due to a drastic decrease in its level due to menopause, there is a high chance of cholesterol building up on the walls of the artery in the heart, which can cause many cardiovascular diseases.

(For example, if you used a lunch meat that claimed to be 97% fat-free, were just 3% of its calories provided by fat?) If the manufacturer made such claims, how do you explain the difference between the manufacturer's claims and your findings?

Salmon

Answers

The difference between the manufacturer's claims and your findings is, the manufacturer is concerned about amount of fat in the meat while you are concerned about calories.

Difference between your findings and the manufacturers claim

Your findings concluded that only fat can provide calories needed in the body, perhaps other classes of food or nutrients in the meat can provide calories as well.

In the manufacturer's claim there are about 3% fat in the lunch meat and doesn't necessary mean that all the calories needed is the 3% fat.

Thus, there are lots of difference between your findings and the manufacturer's claim. The manufacturer is concerned about amount of fat in the lunch meat while you are concerned about calories in the meat.

Learn more about claims here: https://brainly.com/question/2748145

#SPJ1

As a wave travels through a medium, the particles of the medium vibrate in a direction perpendicular to the direction of the wave’s motion. What kind of wave is this? Longitudinal Wave, Pulse Wave, Transverse Wave, Pressure Wave, or Electromagnetic Wave?

Answers

The answer is Transverse wave
The answer is transverse wave

Why is digital forensics important?

Answers

Hi! digital forensics is important because not only does digital forensics allow cyber security organisations to develop technologies that can prevent hackers from accessing devices, websites and networks but can lead businesses in the direction of understanding exactly what data is compromised.

An infinitely long line of charge has a linear charge density of 8.00*10^−12 C/m. A proton is at distance 19.0 cm from the line and is moving directly toward the line with speed 1200 m/s. How close does the proton get to the line of charge?

Answers

Hi there!

To solve, we need to find the distance traveled by the proton at which the proton's velocity reaches 0 m/s. This indicates the point at which the repulsive force caused by the line of charge and its consequential acceleration causes the proton to stop for an instant and be repelled back in the opposite direction.

For this, we can use the work-energy theorem to solve.

Recall the following equations:
[tex]W = \Delta KE[/tex]

[tex]W = \int F \cdot dx\\\\KE = \frac{1}{2}mv^2[/tex]

We will integrate along the path from the point 19.0 cm (0.19 m) from the line up to a point 'z' at which the proton has no kinetic energy (v = 0 m/s). This means that the wire will be doing NEGATIVE work on the proton as it is decreasing the proton's kinetic energy.

The equation for a force acting on a charged particle is given as:
[tex]F_E = qE[/tex]

For an infinite line of charge, the electric field is given as:
[tex]E = \frac{2k\lambda}{r}\\\\F_E = \frac{2k\lambda q}{r}[/tex]

**λ = Linear charge density (C/m)

To set up our integral:
[tex]W = \Delta KE = \int\limits^z_{0.19} {\frac{2k\lambda q}{r}} \, dr = -\frac{1}{2}mv^2[/tex]

Integrate using the following natural log rule:
[tex]\int {\frac{1}{r}} \, dr = ln(r) + C[/tex]

[tex]\int\limits^z_{0.19} {\frac{2k\lambda q}{r}} \, dr = -\frac{1}{2}mv^2\\\\2k\lambda q ln(r) \left \| {{z} \atop {0.19}} \right. = -\frac{1}{2}mv^2\\\\2k\lambda q (ln(z) - ln(0.19) = -\frac{1}{2}mv^2\\\\2k\lambda q ln(\frac{z}{0.19}) = -\frac{1}{2}mv^2[/tex]

Now, we can begin solving for 'a'.

Move coefficients to one side:
[tex]ln(\frac{z}{0.19}) = -\frac{mv^2}{4k\lambda q }[/tex]

Take the base 'e' of both sides:
[tex]e^{ln(\frac{z}{0.19})} = e^{-\frac{mv^2}{4k\lambda q }}\\\\\frac{z}{0.19} = e^{-\frac{mv^2}{4k\lambda q }}\\\\z = (0.19)e^{-\frac{mv^2}{4k\lambda q }}\\\\z = (0.19)e^{-\frac{(1.67*10^{-27})(1200^2)}{4(8.99*10^9)(8.00*10^{-12}) (1.6*10^{-19}) }}\\\\\boxed{z = 0.1803 m= 18.03 cm}[/tex]

It will reach a distance 18.03 cm from the wire before it temporarily loses all of its kinetic energy (at rest) and begins to speed up in the opposite direction.

What is the velocity of a plane that travels 3,000 miles in 5.0 hours?

Answers

Answer:

600mph

Explanation:

hope this helps!

Dressing suitably for different situations, using appropriate language, and maintaining good personal hygiene are all ways to demonstrate .
An employee will display by adhering to professional standards of the workplace and encouraging co-workers to do the same.

Answers

Dressing suitably for different situations, using appropriate language, and maintaining good personal hygiene are all ways to demonstrate self-representation.

Who is a leader?

A person taking the charge of the organization and leading a team under him is known as a leader.

"The complete question is"Dressing suitably for different situations, using appropriate language, and maintaining good personal hygiene are all ways to demonstrate _______________. An employee will display _______________ by adhering to professional standards of the workplace and encouraging co-workers to do the same."

Options:

First Blank: work ethic

First Blank: self-representation

First Blank: diversity awareness

Second Blank: leadership skills

Second Blank: nonverbal skills

Self-representation may be shown through dressing appropriately for diverse settings, speaking politely, and keeping up with personal cleanliness.

By upholding the workplace's ethical norms and encouraging others to do the same, an employee will demonstrate leadership qualities.

Dressing suitably for different situations, using appropriate language, and maintaining good personal hygiene are all ways to demonstrate self-representation.

An employee will display leadership skills by adhering to the professional standards of the workplace and encouraging co-workers to do the same.

Hence, self-representation and leadership skills are the correct answer.

To learn more about the leader refer to:

https://brainly.com/question/15176246

#SPJ1

Sunlight hits the black asphalt pavement on a sunny,
summer day. The pavement becomes excessively hot.
What wave behavior is demonstrated by this
phenomenon?

Answers

It is radiation (don’t mind this part just to fill 20 characters)

Why is it important to to find information about if if crabs can or can't see the plankton, they eat near the ocean floor

Answers

Answer:

One possible explanation students can make: The crabs cannot see the plankton they eat near the ocean floor. For the crabs to see the plankton, some color of visible light would need to reach the plankton so that it can be reflected into the crabs' eyes.

Two large parallel metal plates carry opposite charges. They are separated by 0.20 m and the p.d. between them is 500 V. What is the magnitude of electric field, if it is uniform, in the region between them.​

Answers

Hi there!

We can use the following relationship between the Potential Difference and the Electric field:

[tex]V = E d[/tex]

V = Potential Difference (500V)
E = Electric Field (V/m)
d = separation between plates (0.2 m)

We can rearrange the equation to solve for the electric field:
[tex]E = \frac{V}{d}\\\\[/tex]

Plug in the given values.

[tex]E = \frac{500}{0.2} = \boxed{2500 \frac{V}{m}}[/tex]

If a 75 resistor is connected to a 18 V battery, how much current passes
through the resistor?

Answers

Answer:

0.24 A

Explanation:

Voltage is given by the equation :

V = I × R

Voltage = Current × Resistance

Rearrange to make Current/I the subject :

18 = I × 75

I = 18÷75

I = 0.24 A

Hope this helped and brainliest please


You drive a car east on the highway at 26 m/s. Another car passes you moving east traveling at 32 m/s. How fast do you view the car passing you?

Answers

The speed of the car passing you is 6 m/s while car is moving 6 m/s behind the car.

Relative velocity of the car

The speed of the car passing you is determined by applying relative velocity principle as shown below;

Vr = Va - Vb

Vr = 26 m/s - 32 m/s

Vr = -6 m/s

Thus, the speed of the car passing you is 6 m/s while car is moving 6 m/s behind the car.

Learn more about relative velocity here: https://brainly.com/question/17228388

#SPJ1

A sewing machine uses 1.6kWh of electricity in one day. If electricity costs 9p per unit, what is the total cost in pence of using the sewing machine that day? Give your answer to 3 significant figures.

Answers

Answer:

[tex]\huge\boxed{\sf 1.6\ units = 14.4p}[/tex]

Explanation:

Since,

1 kWh = 1 unit

So,

1.6 kWh = 1.6 units

If,

1 unit = 9p

1.6 units = 9p × 1.6

1.6 units = 14.4p

[tex]\rule[225]{225}{2}[/tex]

What keeps the Moon from falling directly to Earth?
OA. The Moon is balanced between the gravitational pulls from both
Earth and the Sun.
OB. The Moon's gravitational force balances the gravitational pull from
Earth.
OC. The Moon's rotation about its own axis creates centripetal force
that balances Earth's pull.
OD. The Moon has a large tangential velocity that causes it to "miss"
Earth as it falls toward it.

Answers

The reason why the moon does not fall back to the earth is that  the Moon's rotation about its own axis creates centripetal force

that balances Earth's pull.

What is the gravitational force?

The gravitational force is the force that keeps the solar system together. All the members of the celestial bodies are held in place by gravity.

Thus, the reason that keeps the moon from falling back to the earth is because the Moon's rotation about its own axis creates centripetal force that balances Earth's pull.

Hence,  their tangential velocity is sufficient to ensure that the flight path misses the object being orbited. The centripetal force is enough to bend the otherwise straight path into an ellipse.

Learn more about the gravitational force:https://brainly.com/question/12528243

#SPJ1

Answer:

  D. The Moon has a large tangential velocity that causes it to "miss" Earth as it falls toward it.

Explanation:

You want to know what keeps the Moon from falling directly to Earth.

Orbit

The Moon does not fall directly to Earth because the direction of motion is more or less perpendicular to the direction of Earth from the Moon. That is, the large tangential velocity causes it to "miss" Earth.

Additional comment

One object will orbit another if their mutual gravitational attraction provides enough acceleration (change in speed and/or direction) to bend the path into a circular or elliptical one. If the acceleration is too little, the path may be bent, but no orbit will be established. If the acceleration is too great, the path may be bent to a curve that ultimately causes the objects to collide.

In general, the multi-body dynamics present in the solar system mean that the orbits of various objects are chaotic. In the short term, they are fairly predictable, but short-term behavior may not be predictive of long-term behavior.

an object is thrown straight up. which of the following is true abought the sign of workdone by the force of gravity on the object, while the object moves up and then down

Answers

Answer:

Upward: Negative

Downward: Positve

Explanation:

Let upward be positive

We want to find the work done on the object upwards.

The equation of work done due to gravity is

[tex]f _{g}d \cos( \alpha ) [/tex]

It is read as force of gravity times displacement times cos of the angle between the force and displacement.

Since gravity is happening down of the center of mass and the displacement is upwards, the angle is 180° so

[tex]f_{g}d \cos(180) [/tex]

Cosine of 180 is -1

so

[tex] - f_{g}d [/tex]

If we go downwards, the sign will be positive because cos(0)=1

How to determine the width/thickness of a coin using a screw gauge?​

Answers

We can calculate the width/thickness of a coin using a screw gauge by placing it in between the teeth of the gauge.

How we can calculate the thickness using screw gauge?

We can determine the width/thickness of a coin by using a screw gauge because screw gauge is an instrument that measures thickness of an object that are very thin. First we can placed the coin in between the teeth of the gauge and then move the gauge until the coin can be held tightly. After that note the reading on the scale.

So we can conclude that we can calculate the width/thickness of a coin using a screw gauge by placing it in between the teeth of the gauge.

Learn more about thickness here: https://brainly.com/question/4937019

#SPJ1

In-Class Problem #2
at
at
A 79.5 kg defensive end tackles a 60 kg
running back going north at 5 m/s. After the
hit both players move together at 2.5 m/s
south. How fast was the defensive end
running before the tackle?
on
ne ta
EAOLES
62
v = 8.16 m/s south
-0
362

Answers

Answer:

8.16m/s south

Explanation:

North is the negative direction.

60kg*(-5m/s)+79.5kg*v=(79.5kg+60kg)*(2.5m/s)

-300kgm/s+79.5kg*v=348.75kgm/s

79.5kg*v=648.75kgm/s

v=8.16m/s

Discuss the role of oxygen in air supply.

Answers

T he role of oxygen in air supply is to keep all the ling beings live and healthy.

What is Oxygen?

Oxygen is the most important gas required for the living of human beings, animals, birds and the whole ecosystem.

Oxygen is fundamental for breath on the grounds that the body utilizes it to 'consume' food atoms. Creatures take in oxygen while breathing in and radiate carbon dioxide while breathing out. Oxygen makes up practically 21% of the all out gases in air, with the majority of the excess gas being physiologically latent nitrogen.

Oxygen assumes a basic part in breath, the energy-delivering science that drives the digestion systems of most living things. We people, alongside numerous different animals, need oxygen in the air we inhale to remain alive. Oxygen is created during photosynthesis by plants and many sorts of organisms.

Thus, the air supply needs oxygen on the majority.

Learn more about oxygen.

https://brainly.com/question/2272415

#SPJ1

You are working for a manufacturing company. Your supervisor has an idea for controlling the position of a small bead by using electric fields. The physical setup is shown in the figure below.

Answers

You are working for a manufacturing company, which is mathematically given as

[tex]m=3\sqrt{2}[/tex][tex]m=\frac{15\sqrt{5}}{16}[/tex]x=0.747a[tex]m/n=\frac{(x^2+a^2)3/2}{x^3}[/tex]

What is the value of m that will place the movable bead in equilibrium at x-a a ....?

a)

Generally, the equation for the force of equilibrium is mathematically given as

F=2fcos\theta

Therefore

[tex]K(npq^2/a^2)=2\frac{kmpq^2}{a\sqrt{2}^2}0.5\\\\np=mP/ \sqrt{2}\\\\where n=3[/tex]

[tex]m=3\sqrt{2}[/tex]

b)

By force equilibrium

[tex]K(npq^2/(2a^2))=2*\frac{kmpq^2}{a\sqrt{5a}^2}* \frac{2a}{\sart{5a}}[/tex]

Therefore

[tex]n/4=2/5*m*2/\sqrt{5}\\\\m= \frac{5\sqrt{5}}{16}\\\\\\\\[/tex]

[tex]m=\frac{15\sqrt{5}}{16}[/tex]

c)

[tex]K(npq^2/x^2)=2\frac{kmpq^2}{a\sqrt{x^2+a^2}^2}0.5*x/\sqrt{x^2+a^2}[/tex]

x^2+a^2=(14/3)^{2/3}x^2

x=a/1.338

x=0.747a

d)

By force equilibrium

[tex]K(npq^2/x^2)=2\frac{kmpq^2n}{\sqrt{x^2+a^{3/2}}^2}\\\\n/x^2=\frac{2mx}{(x^2+a^2)^{3/2}}[/tex]

[tex]m/n=\frac{(x^2+a^2)3/2}{x^3}[/tex]

Read more about electric fields

https://brainly.com/question/9383604

#SPJ1

Other Questions
Question 4 of 25Click to read the passage from "Speech After Having Been Convicted ofVoting," by Susan B. Anthony. Then answer the question.The passage provides the first two paragraphs of Anthony's speech. Howdoes Anthony present her claim in the speech?A. She mentions it in the first sentence of the second paragraph.B. She mentions it in the middle of the second paragraph.C. She states it in the last sentence of the second paragraph.D. She states it in the first paragraph. 2. calcium reacts with oxygen to produce calcium oxide what is the :reactant' :products' and chemical equation" of this problem A brick is kept in 2 different ways on a table as shownbelow. which brick exerts more pressure? Why? What is the role of reasoning in learning and teaching process 23) What is another term for a free enterprise economic system?a) Democracyb) Socialismc) Capitalismd) Communismibien of a citizen? An 80-centimeter ramp connects the sidewalk to the bed of a truck. If the rampforms a 30-degree angle with the ground, the truck bed is centimeters off the ground. Question 1 of 10What is the effect on the graph of f(x) = x when it is transformed toh(x) = x +12? Andy has a parcel with an elevation that is substantially lower than most of the neighboring properties. in order to have the same view as neighboring parcels, a house built on his parcel will have to be 18 feet higher than the height limit for the zoning district. if he is to build such a house, he will need: a sticker shaped like a rectangle has an area of 56 square centimeters. it has a width of 7 centimeters. Which type of energy resource does not use a turbine to generate electricity?A. PetroleumB. SunlightC. Biomass D. Coal Julia made a model of a square pyramid. She used cardboard to construct the model with the dimensions shown. It has an open bottom.A square pyramid has a square base with side lengths of 8 centimeters, and 4 triangular sides with a height of 5 centimeters.What is the surface area of the model?A. 80 cm2B. 144 cm2C. 224 cm2D. 320 cm2 Help please . Why is it important that a pharmacist knows each medication that a person is taking before they provide a new drug? VHL spanish hw, lesson 3 Read the exchanges, and complete them with the correct forms of the present indicative or the present subjunctive.A: Espero que los otros estudiantes me (1) _______(aceptar) tal como soy.B: Seguro que algunos (2) ________ (considerar) la pregunta De dnde eres? ofensiva, pero es malo que yo quiera que los dems me (3) ________ (reconocer) como salvadoreo en vez de latino o hispano? indicate structural adaptations of Mitochondria for its function Use the pictureWhich statement explains the potential impact of new voter identification (ID)laws on the states highlighted in the map?(Which is the answer Below)1. The last could result in decreased voter participation and lead to elections results being thrown out2. The laws could result in increased in voters participation rate and change state congressional representation 3. The loss could lead to a decrease in the number of eligible voters in affect which candidate win elections4. The laws could lead to an increase in the number of eligible voters and boost the influence of some states and national election The feast included many Choose... dishes from around the world. It was fun to sample foods from different regions and cultures. (A) Bland (B) Ethnic (C) Natitonal (D) Questionable 4. PLEASE HELP!!!!!!You have a cup with 17 coins inside. The total inside the cup is $5.50. Determine how many half dollars and quarters are inside the cup. Use a system of equations. Be sure to define the variables and show all work. We have had our failures, but so have others, even if they do notadmit them. And they may be less public.Which statement most clearly focuses on a theme in this passage?O A. When Kennedy refers to "others" and "they," he primarily means the SovietUnion, which was winning the space race at the time.OB.Kennedy is referring to the tenden of the Soviet Union to gloss over itsfailures in the space race with propaganda.O C. Kennedy emphasizes how far humanity has come technologically sincethe beginning of civilization, which makes his audience optimistic.OD. Kennedy evokes unease about the Soviet Union's participation in thespace race when he refers to "others" and "they."