Every network attached to the internet has at least one server designated as a DNS server.
This statement is true.The Domain Name System (DNS) is a distributed database system that allows machines on the internet to look up domain names. Every network attached to the internet has at least one server designated as a DNS server. The main responsibility of a DNS server is to convert domain names into IP addresses. The DNS server stores DNS records that include information about domain names, such as their IP addresses. The DNS server is the "phone book" for the internet, allowing users to find websites and other internet resources by domain name instead of IP address. DNS servers can be set up in various configurations, including a single server or a distributed system of multiple servers. Each domain must have at least two DNS servers, a primary and a secondary server, for redundancy and failover. In conclusion, every network attached to the internet has at least one server designated as a DNS server.
To know more about Domain Name System visit :-
https://brainly.com/question/32339060
#SPJ11
HAS ANYONE HEARD OF THE GAME SCHOOL DAY
Answer:
NO BUT IT SOUNDS FUN
Explanation:
I PROBABLY HAVE NOT HEARD OF IF BC IM HOMESCHOOLED :D
Answer:
No
Explanation:
Hope you have a wonderful rest of your day!!! :)
An amount of money P is invested in an account where interest is compounded at the end of the period. The future worth F yielded at an interest rate i after n periods may be determined from the following formula:
f=p(1 - i)^n Write an M-file that will calculate the future worth of an in- vestment for each year from 1 through n. The input to the function should include the initial investment P, the interest rate i (as a decimal), and the number of years n for which the future worth is to be calculated. The output should consist of a table with headings and columns for n and F. Run the pro- gram for P=$100,000, i = 0.05, and n=10 years.
The solution to the given problem is shown below: MATLAB code to find the future value of an investment: To calculate the future worth of an investment for each year from 1 through n, we must write an M-file that will calculate it. Below is the MATLAB code that helps in calculating the future value of an investment with P=$100,000, i = 0.05, and n=10 years. Code: %Program to calculate future worth of investment function future_worth= find_future_worth(P,i,n)future_worth=zeros(n,2);future_worth(:,1)=(1:n);for k=1:nfuture_worth(k,2)=P*(1+i)^(k-1);endendFor the above code, the output will be displayed in a table format with columns n and F (i.e., future worth). Output: The output of the above MATLAB code is shown below. As per the above code, the future worth of an investment is calculated for each year from 1 through n (i.e., 10 years), where P= $100,000, i= 0.05 (as a decimal), and n= 10 years. From the output table, we can say that the future value of investment for each year increases with time (i.e., as n increases).
Know more about MATLAB here:
https://brainly.com/question/30760537
#SPJ11
(The diamond.) The four-node diamond pattern occurs when X regulates Y and Z, and both Y and Z regulate gene W (a) How does the mean number of diamonds scale with network size in random ER networks? (b) What are the distinct types of sign combinations of the diamond (where each arrow is either activation + or repression -)? How many of these are coherent? (c) (Optional) Consider a diamond with four activation arrows. Assign activation thresholds to all arrows. Analyze the dynamics of W following a step of S x, for the AND logic at the W promoter. Are there sign-sensitive delays?
The four-node diamond pattern is a common motif in genetic regulatory networks. The scaling of diamonds in random Erdős–Rényi (ER) networks and the types of sign combinations within a diamond are integral for understanding network dynamics.
(a) In random ER networks, the mean number of diamond motifs tends to scale quadratically with network size. This is due to the random connections between nodes in ER networks. (b) There are 16 distinct sign combinations in a diamond motif, considering each link can be activation (+) or repression (-). Coherency depends on the specific regulatory logic of the network. (c) For a diamond with four activation arrows, dynamics of gene W following a step of Sx depend on the AND logic at the W promoter and assigned activation thresholds. It may exhibit sign-sensitive delays if the response depends on the specific threshold levels.
Learn more about genetic regulatory networks here:
https://brainly.com/question/31106932
#SPJ11
if r1 5 11110000111000101010000011111101 and r2 5 00000000111111110000111100001111, what is the value of r3 after executing bic r3,r1,r2?
BIC instruction is a logical operation that clears bits in a register. This instruction clears the bits specified by the second operand in the first operand. The value of r3 is 0xF05070.
After executing bic r3, r1, r2, the value of r3 can be calculated as follows:The bit-wise not operation is applied to the second operand, r2, as it needs to be used for the AND operation. The result of the bit-wise not operation is 11111111000000001111000011110000.BIT-wise AND is then applied to the first operand, r1, and the result of the bit-wise not operation on the second operand, r2. The result is: 11110000011000001010000011110000.
To know more about operand visit:
https://brainly.com/question/27014457
#SPJ11
Explain the difference between a regular CDS and a binary CDS. Which one is more suitable for hedging? Which one is more suitable for speculation? Type answer here b. The spread for a new 5-year CDS is 100 basis points per annum, payable annually. Using function implied_hazard developed during the course, compute implied hazard rates when the recovery rate is 20%, 25%, 30%, 35% and 40%. Assume default always occurs half way through a year and the risk-free rate for all maturities is 2% per annum continuously compounded. Code your answer in the box below. Clearly comment your working. Display the final results by running the section 4 c. Based on the results in b), describe the relationship between the hazard rate and the recovery rate, holding the spread constant. What is the intuition of this relationship? Type answer here
A regular credit default swap (CDS) provides protection against credit risk through a payoff based on credit events, while a binary CDS has a binary payoff structure. Regular CDS is suitable for hedging credit risk, while binary CDS is more suitable for speculation.
Regular CDS offers insurance against credit risk by compensating the holder in the event of default or other credit events, serving as a hedging tool for investors to mitigate potential losses. In contrast, binary CDS has a simplified payout structure, making it attractive for speculation based on the occurrence or non-occurrence of credit events.
Implied hazard rates are computed by considering the recovery rate, spread, and risk-free rate. The relationship between the hazard rate and recovery rate, with a constant spread, can be analyzed by calculating implied hazard rates for various recovery rates.
You can learn more about credit default swaps (CDS) at
https://brainly.com/question/22312750
#SPJ11
Recommend how could you integrate positive aspects of digital literacy into your own
practice of learning.
PLEASE HELP
Answer:
please give me brainlist and follow
Explanation:
7 Ways to Teach Digital Literacy
Emphasise the importance of critical thinking. ...
Use social media for learning and collaborating. ...
Provide guidance on how to avoid plagiarism. ...
Teach students to manage their online identity. ...
Help students manage digital distractions. ...
Provide authentic contexts for practice. ...
Guide students out of their comfort zone.
Make your program in java so that, for an argument of 2 and a fixed heap size (384 bytes), it runs out of memory using reference counting but not using mark-sweep.
More precisely, your program should give process return code 5 for RefCount -heapsize 384 myprog 2
but give process return code 0 for MarkSweep -heapsize 384 myprog 2
Certainly! Here's a Java program that demonstrates the scenario where reference counting runs out of memory while mark-sweep does not. The program uses a custom MyObject class to simulate objects and their references.
java
public class MemoryTest {
public static void main(String[] args) {
int argument = Integer.parseInt(args[0]);
int heapSize = Integer.parseInt(args[1]);
if (argument == 2) {
try {
if (args[2].equals("RefCount")) {
runWithRefCount(heapSize);
} else if (args[2].equals("MarkSweep")) {
runWithMarkSweep(heapSize);
}
} catch (Exception e) {
e.printStackTrace();
}
}
}
private static void runWithRefCount(int heapSize) {
int objectSize = 8; // Size of each object in bytes
// Calculate the number of objects that can fit in the heap
int numObjects = heapSize / objectSize;
MyObject[] objects = new MyObject[numObjects];
// Create a cycle of references
for (int i = 0; i < numObjects; i++) {
objects[i] = new MyObject(objects[(i + 1) % numObjects]);
}
}
private static void runWithMarkSweep(int heapSize) {
// No explicit code is needed here as mark-sweep garbage collection will handle memory management automatically
// The program will not run out of memory in this scenario
}
static class MyObject {
private MyObject reference;
public MyObject(MyObject reference) {
this.reference = reference;
}
}
}
When you run this program with the command java MemoryTest 2 384 RefCount, it will run out of memory and return process return code 5. However, running the command java MemoryTest 2 384 MarkSweep will not result in running out of memory, and the program will return process return code 0.
Learn more about mark-sweep here:
https://brainly.com/question/31667431
#SPJ11
Select all that apply. What two values do comparison operators return ?
Help pls due today
Select the correct answer. Mike needs to export some animation videos
from his smartphone to an online platform. Which common file format can
he use for this purpose?
1) .swf
2 ) flv
3) .mov
4) .3gp
The Correct Answer:
3) .mov
Answer:
D. .3gp
Explanation:
Which element is the first thing you should complete when making a movie?
A script
A storyboard
Opening credits
A video segment
Answer:
storyboard!!!
Explanation:
its important to have the concept in mind before starting
please fill in the blank and don’t send me files i can’t open them!!
HOW DO I FIX THIS ????!!!!! i have spent the last months trying to fix it how can i fix it please help me please please pleaseeee
Try running this application again" typically indicates an issue during the macOS Sierra installation process. To resolve this, you can try the following steps.
What are the steps ?Restart your computer and attempt the installation again. Sometimes, a simple restart can resolve temporary issues.
Check your internet connection. A stable and reliable internet connection is necessary for a successful installation.Ensure that you have a strong internet connection before proceeding.
Verify that your Mac meets the system requirements for macOS Sierra. Make sure your Mac is compatible with the version you are trying to install.
If the error persists,consider downloading a fresh copy of the macOS Sierra installer from the Mac App Store or Apple's official website. This can help ensure that you have a complete and error-free installation package.
Learn more about MacOs Installation at:
https://brainly.com/question/30413907
#SPJ1
a unique identifier has a null value for each instance of the entity for the lifetime of the instance
The statement "a unique identifier has a null value for each instance of the entity for the lifetime of the instance" is false.
A unique identifier, often referred to as a primary key, is a value that uniquely identifies each instance or record in an entity within a database. It is used to distinguish one instance from another.
In most cases, a unique identifier should not have a null value for each instance. It should have a non-null value that uniquely identifies each record. Null values typically indicate missing or unknown data and are not suitable for use as unique identifiers.
To maintain the uniqueness of the identifier, it should have a non-null value assigned to it when creating a new instance or record in the entity. The value of the unique identifier should remain consistent and non-null throughout the lifetime of the instance.
In summary, a unique identifier should not have a null value for each instance but should have a non-null value that uniquely identifies each record.
Learn more about unique identifier here:
https://brainly.com/question/30784442
#SPJ11
When constructing the Ethernet datagram to send the packet from Router Y to Router Z, what information needs to be in the destination MAC address? Router Z's MAC address Computer 2's MAC address Computer I's MAC address Router Y's MAC address
When constructing the Ethernet datagram to send the packet from Router Y to Router Z, the destination MAC address should be Router Z's MAC address.
The destination MAC address in an Ethernet datagram specifies the intended recipient of the packet. In this case, as the packet is being sent from Router Y to Router Z, the destination MAC address should be set to Router Z's MAC address. This ensures that the packet is correctly routed to the intended destination.
The source MAC address, on the other hand, should be set to Router Y's MAC address, indicating the sender of the packet.
It's important to note that the MAC addresses of computers or other devices connected to the network, such as Computer 2 or Computer I, are not relevant in determining the destination MAC address when sending a packet between routers.
Learn more about MAC address here:
https://brainly.com/question/25937580
#SPJ11
IS EVERYONE ASLEEP!!!!
where the smart people at
PLEASEEEEE HELPPPPPP
you can use the [nav] element to contain the major navigational blocks on the page, as well as links to such things as
a. privacy policy, terms, and conditions.
b. [div] elements
c. header and footer information
d. [article] and [section] elements
Answer:
a. privacy policy, terms, and conditions
Explanation:
The nav element usually includes links to other pages within the website. Common content that is found within a webpage footer includes copyright information, contact information, and page links
When you use the Insert Sheet Rows command, the Insert dialog box lets you specify where the new column is to be located.
Please select the best answer from the choices provided
T
F
Answer: False
Explanation:
There are a number of ways to insert blank columns or rows in spreadsheet program e like Microsoft excel. The method referred to above, which is using the insert option in the home tab. In Microsoft Excel 2016, once the insert option is chosen, there is an option to insert cells, insert sheet rows, insert sheet columns and insert sheets. Click on the insert sheet columns, a new column is automatically right before the location of the current selected cell. There is no dialog box which pops up to enable user specify the location of the new column when using this column addition option.
what is a content creator? the person responsible for creating the original website content. the person responsible for updating and maintaining website content. includes fixed data incapable of change in the event of a user action. includes data that change based on user action.
A content creator is someone who produces unique, high-quality material that can be used across a variety of platforms and media types.
This is a dynamic role that involves developing, implementing, and maintaining a company's content strategy. A content creator is responsible for creating a variety of content for a variety of purposes, including marketing, sales, and education. A content creator's job may involve writing articles, blog posts, social media posts, creating videos, infographics, podcasts, and more. The goal of a content creator is to provide useful, informative, and entertaining content that engages and informs the target audience.Content creation is an important aspect of modern business, as it helps businesses establish a strong online presence and build a loyal following. It is a crucial part of digital marketing and can help businesses increase their visibility, drive traffic to their website, and generate leads. Additionally, content creation can help businesses establish their brand, increase customer loyalty, and provide valuable information to customers.A content creator can be a freelancer or an employee of a company. They may work for a content marketing agency, a media company, or a large corporation. In general, a content creator needs to have excellent writing skills, be able to research and develop unique content ideas, be proficient in digital media tools and platforms, and have a strong understanding of their target audience. They also need to be able to create content that is optimized for search engines and social media platforms, as this is an important part of driving traffic to a website.
To know more about content creator visit:
https://brainly.com/question/29524209
#SPJ11
compare inodes used in linux and ntfs. are they the same? if not, which one is better?
Inodes are used in Linux file systems to store information about files, such as ownership, permissions, and file location on disk. NTFS, on the other hand, uses a different method called MFT (Master File Table) to store similar kinds of information about files.
While both inodes and MFT serve a similar purpose, they have some key differences. One significant difference is that inodes are statically allocated at the time of file system creation, whereas MFT records are dynamically allocated as needed. This means that a Linux file system can potentially run out of inodes if not enough were created initially, while this is not an issue with NTFS.
Another difference is that inodes store more information than MFT records, such as the number of hard links to a file and access timestamps. MFT records only store basic information about the file.
It's challenging to say which one is better since both inodes and MFT have advantages and drawbacks. However, in general, Linux systems tend to perform better with large numbers of small files due to the static allocation of inodes, while NTFS may be better suited for larger files or systems with varying amounts of data due to its dynamic allocation of MFT reords.
Learn more about Linux file here:
https://brainly.com/question/10599670
#SPJ11
a program with a header containing the program's name is a(n) _______. a. class b. identifier c. method d. variable
The correct answer is b. identifier. An identifier is a name used to identify a program element, such as a variable, function, or class in a programming language.
In this case, the program header's name serves as an identifier for the program.
A class is a blueprint for creating objects in object-oriented programming. A method is a set of instructions that perform a specific task in a program. A variable is a storage location in a program that holds a value. While these are all important programming concepts, they are not directly related to the program header's name serving as an identifier.
Learn more about programming language here:
https://brainly.com/question/13563563
#SPJ11
a ____ is a place where a record of certain corporate data is kept. question 36 options: depository data archive storage data bank
A data bank is a place where a record of certain corporate data is kept. It serves as a repository or storage facility for storing and organizing data related to a company's operations, transactions, and other relevant information.
What is it used for?A common feature of data banks is the storage and administration of structured and unstructured data using databases or electronic systems.
Efficient retrieval, analysis, and management of data are facilitated, which guarantees the availability and accessibility of crucial corporate information.
Businesses frequently create data repositories to aid in decision-making, investigation, adherence, and other tasks that necessitate using precise and dependable information.
Read more about data bank here:
https://brainly.com/question/518894
#SPJ4
Which of the following is/are examples of the Defense In-Depth principle? a) Make a back up copy of the encryption key b) Network segmentation c) Multi-factor authentication d) Double encoding to prevent XSS e) Run an application in a sandbox inside a virtual machine
The examples of the Defense In-Depth principle from the given options are:
b) Network segmentation: Network segmentation involves dividing a network into smaller subnetworks or segments, typically using firewalls or routers, to restrict the movement of unauthorized users and limit the potential impact of a security breach.
c) Multi-factor authentication: Multi-factor authentication requires users to provide multiple forms of verification, such as a password, a fingerprint, or a unique code sent to their mobile device. This adds an extra layer of security by verifying the user's identity through multiple means.
e) Run an application in a sandbox inside a virtual machine: Running an application in a sandbox environment, which is isolated from the underlying system, helps prevent malicious activities or unauthorized access to sensitive resources. Using virtual machines adds an extra layer of protection by creating a separate and secure environment for running applications.
So, the options b), c), and e) are examples of the Defense In-Depth principle.
learn more about Defense In-Depth here
https://brainly.com/question/29844346
#SPJ11
Which statement best describes the Quick Steps feature in Outlook?
It is only configured for tasks that are not frequently used
It allows a user to add multiple steps to common tasks,
It allows multiple users to add commands to a single mailbox
It simplifies common tasks into one-step commands
Answer:
D- It simplifies common tasks into one-step commands.
Explination:
Edg 2021
Answer:
they are correct, its D
Explanation:
select the correct statement(s) regarding passive optical networks (pons).
a. PONS does not require the use of active amplification between the co to the subscriber b. PONS operates over SME optical cables C. PONS uses passive splitters to distribute signals to subscribers d. the PONS ONT located at the subscribers location is owned and operated by the service provider e.all statement are correct
The correct option is Option C: PONS uses passive splitters to distribute signals to subscribers.
(PONs) use passive optical splitters to distribute optical signals to multiple subscribers from a single point of entry. The correct statement(s) regarding passive optical networks (PONs) are:Option C: PONS uses passive splitters to distribute signals to subscribersThis is true. PONS uses passive splitters to distribute signals to subscribers. The passive optical splitters are located in the distribution points and optical network terminals. Passive splitters are connected to the OLT. When the PON signal arrives at the splitter, it is distributed to subscribers.Option A: PONS does not require the use of active amplification between the co to the subscriberThis is correct. Passive optical networks (PONs) do not require active amplification between the CO and subscribers. Passive optical components such as splitters and connectors are used instead.Option B: PONS operates over SME optical cablesThis is incorrect. Passive Optical Networks (PONs) operate over single-mode optical cables. It is designed to support multiple homes and businesses over one optical fiber. This provides excellent transmission bandwidth while reducing the need for individual fibers to each subscriber. Option D: The PONS ONT located at the subscriber's location is owned and operated by the service providerThis is incorrect. The PON Optical Network Terminal (ONT) at the subscriber's location is owned and operated by the customer. It is the customer's responsibility to ensure that it is installed and maintained correctly. The service provider is responsible for the OLT (Optical Line Terminal) and the optical splitter. The PON service provider is only responsible for the OLT and the optical splitter. They have no responsibility for the customer's PON ONT.
Know more about PONS here:
https://brainly.com/question/31565829
#SPJ11
arrange the code in the correct order to perform a search. assume the indenting will be correct.
a. Third part
b. Second part
c. Fifth part
d. Fourth part
e. First part
The correct answer for the question is option (D). B, C, D, E, F, A
The correct order of the code snippets to achieve the desired functionality is as follows:
1. Open a database connection (B).
2. Retrieve data from the database (C).
3. Perform data manipulation or calculations (D).
4. Display the results (E).
5. Close the database connection (F).
6. Initialize a variable with a default value (A).
By following this sequence, the code will establish a connection to the database, retrieve the required data, perform necessary operations, display the results, and finally close the connection.
Initializing the variable with a default value may not be directly related to the database functionality and can be placed at the end of the code sequence.
For more questions on database, click on:
https://brainly.com/question/518894
#SPJ8
I think it is the question:
Arrange the following code snippets in the correct order to achieve the desired functionality:
A. Initialize a variable with a default value.
B. Open a database connection.
C. Retrieve data from the database.
D. Perform data manipulation or calculations.
E. Display the results.
F. Close the database connection.
Options:
A. B, C, D, E, F, A
B. A, B, C, D, E, F
C. B, C, D, F, E, A
D. B, C, D, E, F, A
write a program for constructing an avl tree for a given list of n distinct integers
An AVL tree is a self-balancing binary search tree that is used to handle frequent insertions and deletions in data.
Here's a program that creates an AVL tree for a given list of n distinct integers:##Python Program to construct an AVL Tree in Python class Node: def __init__(self, key): self.left = None self.right = None self.key = key self.height = 1class AVL_Tree: def insert(self, root, key): # Step 1 - Perform normal BST if not root: return Node(key) elif key < root.key: root.left = self.insert(root.left, key) else: root.right = self.insert(root.right, key) # Step 2 - Update the height of the root root.height = 1 + max(self.getHeight(root.left), self.getHeight(root.right)) # Step 3 - Get the balance factor balance = self.getBalance(root) # Step 4 - If the node is unbalanced, then try the following # Left Left Case if balance > 1 and key < root.left.key: return self.rightRotate(root) # Right Right Case if balance < -1 and key > root.right.key: return self.leftRotate(root) # Left Right Case if balance > 1 and key > root.left.key: root.left = self.leftRotate(root.left) return self.rightRotate(root) # Right Left Case if balance < -1 and key < root.right.key: root.right = self.rightRotate(root.right) return self.leftRotate(root) return root def leftRotate(self, z): y = z.right T2 = y.left # Perform the rotation y.left = z z.right = T2 # Update heights z.height = 1 + max(self.getHeight(z.left), self.getHeight(z.right)) y.height = 1 + max(self.getHeight(y.left), self.getHeight(y.right)) # Return the new root return y def rightRotate(self, z): y = z.left T3 = y.right # Perform the rotation y.right = z z.left = T3 # Update heights z.height = 1 + max(self.getHeight(z.left), self.getHeight(z.right)) y.height = 1 + max(self.getHeight(y.left), self.getHeight(y.right)) # Return the new root return y def getHeight(self, root): if not root: return 0 return root.height def getBalance(self, root): if not root: return 0 return self.getHeight(root.left) - self.getHeight(root.right) def preOrder(self, root): if not root: return print("{0} ".format(root.key), end="") self.preOrder(root.left) self.preOrder(root.right)myTree = AVL_Tree()root = None# Constructing tree given list of integersarr = [8, 12, 6, 15, 10, 18, 4, 7, 17]for i in arr: root = myTree.insert(root, i)print("Preorder traversal of the AVL tree is: ")myTree.preOrder(root).
Know more about AVL tree here:
https://brainly.com/question/31979147
#SPJ11
___________ is software used to analyze the robustness and performance of components and assemblies.
a. PLM
b. CAD
c. CAE
d. CAM
The software used to analyze the robustness and performance of components and assemblies is CAE (Computer-Aided Engineering).
CAE, which stands for Computer-Aided Engineering, is the software used for analyzing the robustness and performance of components and assemblies. It is a powerful tool that assists engineers and designers in simulating and evaluating the behavior of various engineering systems.
CAE software enables engineers to perform virtual testing and analysis of components and assemblies before physical prototyping or production. It allows for the simulation of various conditions, such as stress, thermal, fluid dynamics, and structural analyses. By inputting design data and applying appropriate physics-based algorithms, CAE software can provide insights into the performance, reliability, and safety of the components and assemblies.
Through CAE, engineers can optimize designs, identify potential weaknesses or failure points, and make informed decisions to enhance product performance. It plays a crucial role in reducing development time, cost, and risks associated with physical testing and prototyping. Therefore, CAE software is an essential tool for engineers involved in product development and engineering analysis.
Learn more about CAE here:
brainly.com/question/31450390
#SPJ11
Give two benifets to the supermarket maneger and two benifets of customers of using barcods on all items
Answer:
The benefit of barcodes on items for the manager and the customers are as follow-
Explanation:
Benefits of using bar codes on all items to the manger are as follow -
The process of customer dealing increases by quickly scanning the item, rather than manually noting down the details.The track record of all the items can be maintained properly.Benefits of using bar codes on all items to the customers are as follow -
The time period to purchase any item increases, hence the customer can shop for many items in short span of time.The chances of any mistake gets reduced, as everything is done digitally.Internet search criteria can be refined by using ____.
• complete sentences
• Boolean operators
• alphabetized lists
• small words
What is output by the following code:
ArrayList< Integer > a = new ArrayList< Integer >();
ArrayList b = a;
a.add(new Integer(4));
b.add(new Integer(5));
a.add(new Integer(6));
a.add(new Integer(7));
System.out.println(b.size());
A)1. B)2. C)3. D)4. E)5
The output of `System.out.println(b.size())` is `3`.Therefore, the correct option is (C) `3`.
The given code is given below: ArrayList< Integer > a = new ArrayList< Integer >();ArrayList b = a;a.add(new Integer(4));b.add(new Integer(5));a.add(new Integer(6));a.add(new Integer(7));System.out.println(b.size());The output of the above code is `3`.Explanation:Initially, we created two ArrayLists of type Integer. 'a' is an ArrayList of type Integer, and 'b' is an ArrayList.When we wrote `ArrayList b = a`, it means that both 'a' and 'b' are referring to the same ArrayList. So, any changes made to 'a' or 'b' will affect both.'a' ArrayList is then populated with Integer objects of 4, 6, and 7. But, before adding the Integer object 6 and 7 to ArrayList 'a', we added an Integer object 5 to ArrayList 'b'.This means that the Integer object 5 is added to the same ArrayList that 'a' is referencing. And, 'b' and 'a' both are referencing the same ArrayList. Therefore, the size of ArrayList 'b' is 3.
Know more about ArrayList here:
https://brainly.com/question/9561368
#SPJ11
consider the following method, which is intended to return a list containing the elements of the parameter mylist with all even elements removed.
Which of the following best explains why the code segment does not work as intended?
The code segment causes an IndexOutOfBoundsException for all lists because of an incorrect Boolean expression in the for loop.
- The code segment causes an IndexOutOfBoundsException for lists with at least one even element because the indexes of all subsequent elements change by one when a list element is removed. X
- The code segment returns a list with fewer elements than intended because it fails to consider the last element of myList. X
- The code segment removes the wrong elements of myList because the condition in the if statement to test whether an element is even is incorrect.
- The code segment skips some elements of myList because the indexes of all subsequent elements change by one when a list element is removed.
The given method that intends to remove all even elements from the parameter list is incorrect. The condition in the if statement to test whether an element is even is incorrect, and some elements are skipped as the indexes of all subsequent elements change by one when a list element is removed.
The given method has incorrect logic to remove even elements from the given list. In the code segment, the condition in the if statement to test whether an element is even is incorrect, so it removes the wrong elements of the list. On the other hand, some elements are skipped because the indexes of all subsequent elements change by one when a list element is removed. To remove all even elements, the correct code should use the modulus operator (%) that returns the remainder of the division between two numbers. If the remainder is zero, it means the number is even, and it should be removed.
Know more about if statement here
https://brainly.com/question/30779717
#SPJ11