1. R = {(a, b, c): a, b, c are positive integers and a < b < c} ; 2. S = {(x, y): x is a multiple of y}
For the first relation R, we can see that it is an n-ary relation with n = 3. The condition a < b < c ensures that the triplets (a, b, c) are in increasing order. For example, (1, 2, 3) is a valid element of R, but (3, 2, 1) is not.
For the second relation S, we can see that it is a binary relation with n = 2. The condition x is a multiple of y means that for every pair (x, y) in S, x must be divisible by y. For example, (12, 2) is a valid element of S, but (5, 3) is not.
Visit here to learn more about integers : https://brainly.com/question/15276410
#SPJ11
On analyzing a function, Jarome finds that f(a)=b . This means that the graph of f passes through which point?
Answer: (a, b)
Step-by-step explanation:
the notation f(x) = .... refers that plugging "x" into the function gives us a value which we call "f(x)". so the "plugged in" value is a, and the "spit out
value is b. So in terms of points, (x,y), it will be (a,b)
Assuming the number of views grows according to an EXPONENTIAL model, write a formula for the total number of views (V) the video will have after t days. NOTE: The input variable in the function below is t and the equals sign is already given. There should NOT be any z's or y's in your answer. V(t) = _____
If the number of views grows according to an exponential model, then the formula for the total number of views (V) the video will have after t days can be expressed as:
V(t) = A * e^(kt)
where A is the initial number of views, e is Euler's number (approximately equal to 2.71828), k is the growth rate constant, and t is the time in days.
In this formula, the exponential function e^(kt) represents the growth factor of the video views over time. The larger the value of k, the faster the video views grow over time. On the other hand, the value of A represents the initial number of views at t=0, and it determines the vertical shift of the exponential function.
Therefore, the formula for the total number of views (V) the video will have after t days, assuming an exponential model, is:
V(t) = A * e^(kt)
Learn more about "exponential model": https://brainly.com/question/16407547
#SPJ11
If a device shows that a place has high humidity but there are not clouds in the sky you can say that is because a. the temperature is at its minimum b. the temperature is too cold c. the temperature is too warm
d. the temperature is cooling off
Correct answer is c. the temperature is too warm When the temperature is warm, it can cause a higher rate of evaporation, which increases humidity.
Describe why this statement is right?If a device shows that a place has high humidity but there are no clouds in the sky, you can say that it is because the temperature is too warm. High humidity occurs when the air is holding a lot of moisture, and warm air can hold more moisture than cool air.
As the temperature rises, the air can hold more and more moisture until it reaches a point where it becomes saturated, leading to high humidity. Therefore, if there are no clouds in the sky, it is likely that the temperature is high and causing the high humidity reading.
Learn more about evaporation.
brainly.com/question/320765
#SPJ11
Compostie surface area. Please and thank you.
Therefore surface area of given is 331.63square yards.
Define surface area of cuboid?A cuboid's total surface area is equal to the sum of all of its faces' surface areas. Given that a cuboid has six faces, the formula for its total surface area is as follows:
Cuboid's total surface area is equal to 2(lb + bh + hl).
where the cuboid's length (l), width (b), and height (h) are all integers.
Surface area of the given picture = Total surface area of cuboid - Curved surface area of base of hemisphere + curved surface area of hemisphere
= 2(lb+bh+hl) - πr²+ 2πr²
= 2(lb+bh+hl) + πr²
= 2 (36+60+60) + 3.14(2.5)²
= 2 (36+60+60) + 3.14(2.5)²
= 312 + 19.625
= 331.63 square yards.
To know more about surface area visit:
brainly.com/question/2835293
#SPJ1
which of the choices belowm follow an exponetial pattern?select all that apply
The options that follow an exponential pattern are:
A. Division of skin cells every half hour.
C. y = 4 * 3^(x)
How to find the exponential pattern?An exponential function is defined as one which gradually increases or decreases by a constant rate.
A) Division of skin cells every half hour.
It will determine a exponential pattern since it could be represented in the form of:
y = ab^(x)
where:
a is the initial amount of skin cells and also the number of skin cells decreases by a constant rate in every half hour.
Thus, option: A is correct.
B) y = x²
It is not a exponential function.
It is a quadratic function.
Thus, option: B is incorrect.
C) y = 4 * 3^(x)
It is a exponential function.
Since it is represented in the form of:
y = ab^(x)
Thus, option: C is correct.
D) From the given table we could see that this represent a linear function and not exponential since the values are increasing by a fixed rate i.e. 3
Thus, option D is incorrect.
E) You are driving at a constant rate of 55 mph.
This situation will represent a linear function or we may say a constant function.
Thus, option E is incorrect.
F) y = 2x³
It represent a cubic function and not exponential.
Hence, option: F is incorrect.
Read more about exponential form at: https://brainly.com/question/31501021
#SPJ1
my baby sitting service charges an initial $5.00 fee plus an additional 6.50 per hour. write an equation for the situation below
The equation for the situation is C = (f + 6.5)h + 5.00.
We have,
Let C be the total cost charged by the babysitting service.
h = the number of hours of service
f = the initial fee charged by the service.
Now,
The initial fee is $5.00 and the additional cost per hour is $6.50.
The equation for the situation can be written as:
C = f h + 6.5h
We can simplify this equation by combining like terms:
C = (f + 6.5)h + 5.00
This means,
So, the total cost charged by the babysitting service is equal to the sum of the initial fee and the additional cost per hour multiplied by the number of hours of service.
Thus,
The equation for the situation is C = (f + 6.5)h + 5.00.
Learn more about equations here:
https://brainly.com/question/17194269
#SPJ1
I NEED HELP ON THIS ASAP!!!!
In the two functions as the value of V(x) increases, the value of W(x) also increases.
What is the value of the functions?The value of functions, V(x) and W(x) is determined as follows;
for h(-2, 1/4); the value of the functions is calculated as follows;
v(x) = 2ˣ ⁺ ³ = 2⁻²⁺³ = 2¹ = 2
w(x) = 2ˣ ⁻ ³ = 2⁻²⁻³ = 2⁻⁵ = 1/32
for h(-1, 1/2); the value of the functions is calculated as follows;
v(x) = 2ˣ ⁺ ³ = 2² = 4
w(x) = 2ˣ ⁻ ³ = 2⁻⁴ = 1/16
for h(0, 1); the value of the functions is calculated as follows;
v(x) = 2ˣ ⁺ ³ = 2³ = 8
w(x) = 2ˣ ⁻ ³ = 2⁻³ = 1/8
for h(1, 2); the value of the functions is calculated as follows;
v(x) = 2ˣ ⁺ ³ = 2⁴ = 16
w(x) = 2ˣ ⁻ ³ = 2⁻² = 1/4
for h(2, 4); the value of the functions is calculated as follows;
v(x) = 2ˣ ⁺ ³ = 2⁵ = 32
w(x) = 2ˣ ⁻ ³ = 2⁻¹ = 1/2
Learn more about functions here: brainly.com/question/10439235
#SPJ1
Do singles and families have the same distribution of cars? The results are shown in the table below. 10 65 Car Family Single Sport 45 Sedan 40 Hatchback 36 37 Truck 20 45 Van/SUV 22 8 For the data do the following: (a) Calculate the conditional distribution of the type of car given it is owned by families or singles. (b) Make an appropriate graph for comparing the conditional distributions in part (a). (c) Do singles and families have the same distribution of cars? Test at significance level of 0.01.
(a) The conditional distribution of car types differs between families and singles.
(b) An appropriate graph for comparing the conditional distributions could be a stacked or clustered bar chart.
(c) A chi-squared test at a significance level of 0.01 can be used to determine if singles and families have the same distribution of cars.
Do singles and families have the same distribution of cars?(a) The conditional distribution of the type of car given it is owned by families or singles can be calculated by dividing the count of each type of car for families or singles by the total count for families or singles, respectively.
For families:
Sport: 10
Sedan: 45
Hatchback: 40
Truck: 20
Van/SUV: 22
Total count for families = 10 + 45 + 40 + 20 + 22 = 137
Conditional distribution for families:
Sport: 10/137 ≈ 0.073
Sedan: 45/137 ≈ 0.328
Hatchback: 40/137 ≈ 0.292
Truck: 20/137 ≈ 0.146
Van/SUV: 22/137 ≈ 0.161
For singles:
Sport: 65
Sedan: 36
Hatchback: 37
Truck: 45
Van/SUV: 8
Total count for singles = 65 + 36 + 37 + 45 + 8 = 191
Conditional distribution for singles:
Sport: 65/191 ≈ 0.340
Sedan: 36/191 ≈ 0.188
Hatchback: 37/191 ≈ 0.194
Truck: 45/191 ≈ 0.236
Van/SUV: 8/191 ≈ 0.042
(b) An appropriate graph for comparing the conditional distributions in part (a) could be a stacked bar chart or a clustered bar chart, with the types of cars on the x-axis and the proportions on the y-axis. This would visually represent the differences in conditional distributions between families and singles.
(b) A chi-squared test for independence at a significance level of 0.01 can determine if there is a significant association between the type of car and ownership status (family or single), allowing for conclusions about whether singles and families have the same distribution of cars based on observed data.
Learn more about comparison
brainly.com/question/28231489
#SPJ11
Write the equations in cylindrical coordinates.
(a) 2x^(2) − 4x + 2y^(2) + z^(2) = 9
(b) z = 5x^(2) − 5y^(2)
The following parts can be answered by the concept of Cylindrical equation.
a. Cylindrical equation for (a) is: 2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9.
b. Cylindrical equation for (b) is: z = 5r² × cos²(θ) - 5r² × sin²(θ).
the given Cartesian equations to cylindrical coordinates.
(a) To convert 2x² − 4x + 2y² + z² = 9 to cylindrical coordinates, we use the following relationships:
x = r × cos(θ)
y = r × sin(θ)
z = z
Substituting these relationships into the equation, we get:
2(r × cos(θ))² - 4(r × cos(θ)) + 2(r × sin(θ))² + z² = 9
Simplifying the equation, we get:
2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9
Your cylindrical equation for (a) is: 2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9.
(b) To convert z = 5x² − 5y² to cylindrical coordinates, we use the same relationships as before. Substituting them into the equation, we get:
z = 5(r × cos(θ))² - 5(r × sin(θ))²
Simplifying the equation, we get:
z = 5r² × cos²(θ) - 5r² × sin²(θ).
Your cylindrical equation for (b) is: z = 5r² × cos²(θ) - 5r² × sin²(θ).
Therefore,
a. Cylindrical equation for (a) is: 2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9.
b. Cylindrical equation for (b) is: z = 5r² × cos²(θ) - 5r² × sin²(θ).
To learn more about Cylindrical equation here:
brainly.com/question/30591117#
#SPJ11
The following parts can be answered by the concept of Cylindrical equation.
a. Cylindrical equation for (a) is: 2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9.
b. Cylindrical equation for (b) is: z = 5r² × cos²(θ) - 5r² × sin²(θ).
the given Cartesian equations to cylindrical coordinates.
(a) To convert 2x² − 4x + 2y² + z² = 9 to cylindrical coordinates, we use the following relationships:
x = r × cos(θ)
y = r × sin(θ)
z = z
Substituting these relationships into the equation, we get:
2(r × cos(θ))² - 4(r × cos(θ)) + 2(r × sin(θ))² + z² = 9
Simplifying the equation, we get:
2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9
Your cylindrical equation for (a) is: 2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9.
(b) To convert z = 5x² − 5y² to cylindrical coordinates, we use the same relationships as before. Substituting them into the equation, we get:
z = 5(r × cos(θ))² - 5(r × sin(θ))²
Simplifying the equation, we get:
z = 5r² × cos²(θ) - 5r² × sin²(θ).
Your cylindrical equation for (b) is: z = 5r² × cos²(θ) - 5r² × sin²(θ).
Therefore,
a. Cylindrical equation for (a) is: 2r² × cos²(θ) - 4r × cos(θ) + 2r² × sin²(θ) + z² = 9.
b. Cylindrical equation for (b) is: z = 5r² × cos²(θ) - 5r² × sin²(θ).
To learn more about Cylindrical equation here:
brainly.com/question/30591117#
#SPJ11
-2a^(6)-8a^(3)b-8b^(2) write as a product
To write an expression as product means write a number as product of other. The product form of expression -2a⁶ - 8a³b - 8 b² is equals to the -2( a⁶ + 4a³b + b² ).
When we multiply two numbers, the resultant is called the product. For example the product of 3and 5" means "3 x 5" or 15. To write an expression as a product of its factors is called factorization. As we know each product of a number is obtained by multiplying it by any other number. We have an expression, -2a⁶ - 8a³b - 8 b². It is a trinomial because it contains three distinct terms. We have to write it as a product form. For this, we have to try to make factor of the numbers. Factors of first term, - 2a⁶ = -2× a× a×a× a× a× a
Factors of second term, -8a³b = -2×-2 × -2 × a×a×a×b
Factors of second term, -8b² = -2×-2 × -2 × b×b
The common factor in terms = - 2. So, pull out the common factor from expression, we can rewrite the expression as -2( a⁶ + 4a³b + b² ). Hence, required value is -2( a⁶ + 4a³b + b² ). For more information about product, visit :
https://brainly.com/question/28782029
#SPJ4
(a) If A is a 3 × 5 matrix, then the rank of A is at most . Why?(b) If A is a 3 × 5 matrix, then the nullity of A is at most . Why?(c)If A is a 3 × 5 matrix, then the rank of AT is at most . Why?(d) If A is a 3 × 5 matrix, then the nullity of AT is at most . Why?AT= A transpose
The following parts can be answered by the concept of Matrix.
(a) If A is a 3 × 5 matrix, then the rank of A is at most 3. This is because the rank is the maximum number of linearly independent rows (or columns) in a matrix, and since A has only 3 rows, it cannot have more than 3 linearly independent rows.
(b) If A is a 3 × 5 matrix, then the nullity of A is at most 5. The nullity is the dimension of the null space of A, which is the space of all solutions to the homogeneous system Ax = 0. The number of variables in this system is equal to the number of columns in A, which is 5. Therefore, the nullity cannot exceed 5.
(c) If A is a 3 × 5 matrix, then the rank of AT (A transpose) is at most 3. When transposing A, the number of rows and columns are switched, making AT a 5 × 3 matrix. The rank is still the maximum number of linearly independent rows (or columns), so the rank of AT cannot be more than the number of rows in AT, which is 3.
(d) If A is a 3 × 5 matrix, then the nullity of AT (A transpose) is at most 5. Since AT is a 5 × 3 matrix, the nullity corresponds to the dimension of the null space for the homogeneous system ATx = 0, with 3 variables. By the rank-nullity theorem, the rank plus the nullity of a matrix equals the number of columns in the matrix.
Therefore, the nullity of AT is at most 5, as the number of columns in A is 5.
To learn more about Matrix here:
brainly.com/question/28180105#
#SPJ11
find the area of the shaded region
SHOW YOUR SOLUTION
Answer:
1. 15.72m²
2. 48dm²
3. 4m²
Step-by-step explanation:
1.
area of unshaded circle=
r=3m. πr^2. (22/7)×3×3= 28.29
area of shaded circle
radius= total radius- unshaded circle radius
r=5m-3m = 2m
Area= πr^2. (22/7)×2×2= 12.57
therefore area= unshaded-shaded
28.29-12.57= 15.72
2.
area of unshaded= area of square = L²
8×8=64
area of shaded= length= 8-2-2= 4
4×4= 16
total area =
64-16= 48
3.
area of triangle= (b×h)/2
(7×6)/2= 42/2= 12
area of rectangle= L×b
4×2= 8
area=12-8= 4
How to solve this? (Ans: X= 5, y=8)
In the given equation, [tex]\frac{(a^x)^{2}}{b^{5-x}} \times \frac{b^{y - 4}}{a^{y}} = a^2b^4[/tex], the value of x and y is x = 5 and y = 8
Simultaneous equations: Calculating the value of x and yFrom the question, we are to determine the value of x and y in the given equation.
The given equation is
[tex]\frac{(a^x)^{2}}{b^{5-x}} \times \frac{b^{y - 4}}{a^{y}} = a^2b^4[/tex]
To determine the value of x and y, we will simplify the left hand side of the equation and then compare to the right hand side of the equation
The equation can written as
[tex]\frac{(a^x)^2}{a^{y}} \times \frac{b^{y - 4}}{b^{5-x}} = a^2b^4[/tex]
[tex]\frac{(a^{2x})}{a^{y}} \times \frac{b^{y - 4}}{b^{5-x}} = a^2b^4[/tex]
[tex]a^{2x - y}\times b^{y - 4 -(5-x) = a^2b^4[/tex]
Simplify
[tex]a^{2x - y}\times b^{y - 4 -5+x = a^2b^4[/tex]
[tex]a^{2x - y}\times b^{x+y - 9} = a^2b^4[/tex]
By comparison
[tex]2x - y = 2\\x + y - 9 =4[/tex]
Thus,
2x - y = 2
x + y = 4 + 9
and
2x - y = 2
x + y = 13
Solve the equations simultaneously
2x - y = 2
x + y = 13
Adding the two equations, we get:
3x = 15
Dividing both sides by 3, we get:
x = 5
Substituting this value of x into the second equation, we get:
5 + y = 13
Subtracting 5 from both sides, we get:
y = 8
Hence, the solution is:
x = 5, y = 8
Learn more on Simultaneous equations here: https://brainly.com/question/148035
#SPJ1
the sum of two consecutive odd numbers is 56. find the numbers
Answer:
27 , 29
Step-by-step explanation:
Consecutive odd numbers means that, if the lesser number is denoted by the variable, x, that the given equation is:
[tex](x) + (x + 2) = 56[/tex]
Solve. First, combine like terms, then isolate the variable, x:
[tex]x + x + 2 = 56\\(x + x) + 2 = 56\\2x + 2 = 56[/tex]
Do the opposite of PEMDAS. PEMDAS is the order of operations, and stands for:
Parenthesis
Exponents (& Roots)
Multiplications
Divisions
Additions
Subtractions
~
First, subtract 2 from both sides of the equation:
[tex]2x + 2 = 56\\2x + 2 (-2) = 56 (-2)\\2x = 56 - 2\\2x = 54[/tex]
Next, divide 2 from both sides of the equation:
[tex]2x = 54\\\frac{(2x)}{2} = \frac{(54)}{2}\\ x = \frac{54}{2}\\ x = 27[/tex]
Next, solve for the consecutive odd number. Plug in 27 for x:
[tex](x) = 27\\(x) + 2 = (27) + 2 = 29[/tex]
Check. Add 27 with 29:
[tex]27 + 29 = 56\\56 = 56\\\therefore 27 , 29[/tex]
27 , 29 is your answer.
~
Learn more about solving consecutive numbers, here:
https://brainly.com/question/2493629
Consider are linearly independent solutions on of a linear homogenous order differential equation.The objective is to determine whether the set of solution is linearly dependent or not.
To determine whether a set of solutions for a linear homogeneous differential equation is linearly dependent or not, follow these steps:
1. Identify the given solutions: Let's assume the given solutions are y1(t), y2(t), ..., yn(t).
2. Create the Wronskian: The Wronskian is a determinant used to test the linear dependence of solutions. For n solutions, it is an n x n determinant with the ith row containing the ith derivative of the solutions for i = 0, 1, ..., n-1.
3. Compute the Wronskian: Evaluate the determinant by following the standard methods for calculating determinants, such as cofactor expansion or row reduction.
4. Determine linear dependence: If the Wronskian is identically zero (i.e., it is zero for all values of t), then the set of solutions is linearly dependent. If the Wronskian is nonzero for at least one value of t, the set of solutions is linearly independent.
By following these steps, you can determine if the given set of solutions for a linear homogeneous differential equation is linearly dependent or linearly independent.
To know more about "Homogeneous" refer here:
https://brainly.com/question/28303206#
#SPJ11
The US National Center for Health Statistics estimates mean weights of Americans by age, height, and sex. Forty U.S. women, 5 ft 4 in. tall and age 18-24, are randomly selected and it is found that their average weight is 136.88 lbs. Assuming the population standard deviation of all such weights is 12.0 lb, determine
a. a 95% confidence interval for the mean weight :, of all U.S. women 5 ft 4 in. tall and in the age group 18-24 years.
b. a 70% confidence interval for the mean weight :, of all U.S. women 5 ft 4 in. tall and in the age group 18-24 years.
c. Interpret your answer in part (b).
(a) 136.88 ± 3.71
(b) 136.88 ± 2.02
(c) The 70% confidence interval is narrower than the 95% confidence interval.
What are the confidence intervals for the weight of U.S. women ?a. To calculate a 95% confidence interval for the mean weight of all U.S. women who are 5 ft 4 in. tall and in the age group 18-24 years, we can use the formula for a confidence interval for the mean:
Confidence interval = sample mean ± critical value * (standard deviation / square root of sample size)
The critical value for a 95% confidence interval for a normally distributed population is 1.96. Given that the sample mean is 136.88 lbs, the standard deviation is 12.0 lbs, and the sample size is 40, we can plug in these values to calculate the confidence interval:
Confidence interval = 136.88 ± 1.96 * (12.0 / sqrt(40))
Confidence interval = 136.88 ± 3.71
So the 95% confidence interval for the mean weight of all U.S. women who are 5 ft 4 in. tall and in the age group 18-24 years is (133.17 lbs, 140.59 lbs).
b. To calculate a 70% confidence interval, we can use the same formula, but with a different critical value. The critical value for a 70% confidence interval for a normally distributed population is 1.04. Plugging in the given values:
Confidence interval = 136.88 ± 1.04 * (12.0 / sqrt(40))
Confidence interval = 136.88 ± 2.02
So the 70% confidence interval for the mean weight of all U.S. women who are 5 ft 4 in. tall and in the age group 18-24 years is (134.86 lbs, 138.90 lbs).
(c) The interpretation of the 70% confidence interval for the mean weight of U.S. women aged 18-24 and 5 ft 4 in. tall is that it is narrower than the 95% confidence interval, indicating a higher level of certainty (70% confidence) that the true population mean weight falls within the narrower range of (134.86 lbs, 138.90 lbs), compared to the wider range of (133.17 lbs, 140.59 lbs) in the 95% confidence interval. This means that as the confidence level decreases, the confidence interval becomes narrower, providing a more precise estimate of the true population mean. However, a lower confidence level also implies a higher risk of the true population mean falling outside the narrower confidence interval."
Learn more about Confidence Interval
brainly.com/question/29680703
#SPJ11
A spring table arrangement of 30 flowers contains only two kinds of flowers,
daffodils and tulips. The number of tulips, t, is one-fourth the number of
daffodils. Write an equation that represents the relationship between the
number of tulips and the number of daffodils in the arrangement.
Answer:
t = (1/4)d
or
t/d = 1/4
Step-by-step explanation:
t = number of tulips
d = number of daffodils
t = (1/4)d
or
t/d = 1/4
t + d = 30
so, when using the first equation in the second we get
(1/4)d + d = 30
multiplying both sides by 4 to get rid of the fraction :
d + 4d = 120
5d = 120
d = 24
t = (1/4)d = 1/4 × 24 = 6
17. The perimeter of a rectangle is 86 centimeters. The length is 2 centimeters longer than the
width, w. What is the width?
White an equation that could be used to find the width of the rectangle.
According to the problem, the length is 2 centimetres longer than the width, so the length can be expressed as:
l = w + 2
length = width + 2
The perimeter of a rectangle is twice the sum of its length and width, so we can set up an equation to represent the perimeter given in the problem:
P = 2(l + w)
Substituting the expression for l in terms of w, we get:
P = 2((w + 2) + w)
Simplifying this expression, we get:
P = 2(2w + 2)
P = 4w + 4
We know that the perimeter of the rectangle is 86 centimetres, so we can substitute this value into the equation:
86 = 4w + 4
Subtracting 4 from both sides:
82 = 4w
Dividing both sides by 4:
w = 20.5
Therefore, the width of the rectangle is 20.5 centimetres.
The equation that could be used to find the width of the rectangle is:
4w + 4 = 86
where w represents the width of the rectangle in centimetres.
perimeter = 2L + 2w
so 86 = 2L + 2w
if the length is 2cm longer than the width, that means w+2=L
plug this back into our original equation to get 2(w+2) + 2w = 86
distribute terms to get 4w + 4 = 86
4w = 82
w = 20.5cm
what is 3(2/5) Witten in as column vector
The column vector of the expression is 6/5.
What is a column vector?
A column vector is an entity or matric with single column of entries.
Column vectors can be added and subtracted from each other, multiplied by a scalar, and transformed by matrices. They are also used to represent systems of linear equations.
The column vector of the expression is calculated as follows;
3 ( 2/5 ) = ( 3 x 2 )/ 5
= 6/5
Thus, by multiplying the fraction by 3 we have successfully converted the expression into a single vector.
Learn more about column vector here: https://brainly.com/question/21807172
#SPJ1
Step 3: Find how many 13 segments fit in 53.
There are 4 segments of 13 that fit in 53 with a remainder of 1.
To find out how many 13 segments fit in 53, we can use division. To find how many 13 segments fit in 53, we need to divide 53 by 13. We divide 53 by 13, and the quotient will give us the number of 13 segments that fit completely in 53. The remainder will tell us how many units are left over.
53 ÷ 13 = 4 with a remainder of 1
Therefore, there are 4 segments of 13 that fit completely in 53 with 1 unit left over.
Learn more about segments
https://brainly.com/question/28322552
#SPJ4
Complete Question:
Find how many 13 segments fit in 53.
4. Find the length of arc s.
7 cm
0
02 cm.
5 cm
The length of the arc s as required to be determined in the task content is; 17.5 cm.
What is the length of the arc s?It follows from the task content that the length of the arc s is to be determined from the given information.
By observation, the angle subtended at the center of the two concentric circles is same for the 2cm and 5 cm radius circles.
Therefore, it follows from proportion that the length of an arc is directly proportional to the radius of the containing circle.
Therefore, the ratio which holds is;
s / 5 = 7 / 2
s = (7 × 5) / 2
s = 17.5 cm.
Ultimately, the length of the arc s is; 17.5 cm.
Read more on length of an arc;
https://brainly.com/question/28108430
#SPJ1
Consider the function
�
(
�
)
=
(
�
+
3
)
(
�
−
5
)
f(x)=(x+3)(x−5)
What is the axis of symmetry?
To find the axis of symmetry in factored form, use:
�
=
�
1
+
�
2
2
x=
2
r
1
+r
2
The calculated value of the axis of symmetry for the function f(x) = (x+3)(x-5) is x = 1.
Calculating the axis of symmetryTo find the axis of symmetry for the given function, we need to use the formula:
x = -b/2a
where a and b are the coefficients of the quadratic term and the linear term in the function, respectively.
For the given function f(x) = (x+3)(x-5), we can expand it as:
f(x) = x^2 - 2x - 15
Here, a = 1 and b = -2.
Substituting these values into the formula, we get:
x = -(-2)/(2*1) = 1
Therefore, the axis of symmetry for the function f(x) = (x+3)(x-5) is x = 1.
Read more about axis of symmetry at
https://brainly.com/question/28180581
#SPJ1
Find the length of the missing side
Answer:
1. 13 KM. 2. 3.43 KM
Step-by-step explanation:
For these questions, use A^2 + B^2 = C^2, with C being the hypotenuse.
12^2 + 5^2 = c^2
9.5^2 + b^2 = c^2
13 KM,
3.43 KM
what is the range of 2 3 5 4 3 6 4 3. 56 6 5 4
For the sequence 2 3 5 4 3 6 4 3. 56 6 5 4:
The minimum number is 2
The maximum number is 6
The range is 6 - 2 = 4
So the range of the sequence 2 3 5 4 3 6 4 3. 56 6 5 4 is 4.
I NEED HELP ON THIS ASAPP!!!!!
a. The transformation for C > 0, f(x) is h(x) shifted C units to the right.
b. The transformation for C < 0, f(x) is h(x) shifted C units to the left.
What is a transformation?Transformation is a mathematical operation performed to change the shape, size or orientation of a graph or object.
Since we have the basic function h(x) = 2ˣ, we want to describe the functions. We proceed as folllows.
a. To compare f(x) = h(x - C) to the basic function for C > 0, we see that
f(x) = h(x - C)
[tex]f(x) = 2^{x - C}[/tex]
Now, for C > 0, f(x) is h(x) shifted C units to the right.
So, f(x) is h(x) shifted C units to the right.
b. To compare f(x) = h(x - C) to the basic function for C > 0, we see that
f(x) = h(x - C)
[tex]f(x) = 2^{x - C}[/tex]
Now, for C < 0,
[tex]f(x) = 2^{x - (-C)}\\f(x) = 2^{x + C}[/tex]
So, for C < 0, f(x) is h(x) shifted C units to the left.
So, f(x) is h(x) shifted C units to the left.
Learn more about transformation here:
https://brainly.com/question/29788009
#SPJ1
1. Which set of side lengths COULD be a RIGHT TRIANGLE?
A. 6, 11, 15
B. 7, 20, 28
C. 9, 40, 41
D. 12, 30, 39
what is the geometry of this fold? A. overturned B. inverted C. asymmetric D. symmetric
The geometry of the fold is asymmetric.
The term "geometry of the fold" refers to the spatial arrangement or shape of a fold in rock layers. In this case, the fold is described as asymmetric. This means that the fold does not exhibit symmetry or balance in its shape, and one limb of the fold is steeper or has a different shape compared to the other limb.
The term "asymmetric" in geology typically refers to folds that have limbs with different angles of inclination or curvature. Therefore, based on the given options, the correct answer is "C. asymmetric."
Therefore, the correct answer is: A. asymmetric
To learn more about geometry here:
brainly.com/question/11298860#
#SPJ11
The geometry of the fold is asymmetric.
The term "geometry of the fold" refers to the spatial arrangement or shape of a fold in rock layers. In this case, the fold is described as asymmetric. This means that the fold does not exhibit symmetry or balance in its shape, and one limb of the fold is steeper or has a different shape compared to the other limb.
The term "asymmetric" in geology typically refers to folds that have limbs with different angles of inclination or curvature. Therefore, based on the given options, the correct answer is "C. asymmetric."
Therefore, the correct answer is: A. asymmetric
To learn more about geometry here:
brainly.com/question/11298860#
#SPJ11
Complete the square to re-write the quadratic function in vertex form
Answer:
to express the quadratic equetion in to factor form
you must use completing squere method
[tex] y= {x}^{2} - 10x - 5[/tex]
y + 5 = x2 - 10x
y + 5 = x2 - 10xy + 5 + 25 = x2 - 10x + 25
y + 5 = x2 - 10xy + 5 + 25 = x2 - 10x + 25y + 30 = (x - 5)2
y + 5 = x2 - 10xy + 5 + 25 = x2 - 10x + 25y + 30 = (x - 5)2 y = ( x - 5)2 - 30 so we get the factor form of the quadratic equetion.
In other way :
if you need to get vertex (5, -30)
or simply by (x, f(x)) which is (-b/2a,f(-b/2a)) form
a=1
a=1b=-10
a=1b=-10c=-5
so when u substitute and you will get (5, f(5))
then for the y-coordinate you substitute 5 in place of x and you will get -30 so vertex = (5, -30)
PLEASE HELP I'LL GIVE BRAINLIEST PLEASEEE
The values are:
N = 25*12 = 300 (total number of payments)1% = 0.01 (monthly interest rate)PV = $295,000 (present value or principal)PMT = $1,639.71 (monthly payment)P/Y = 12 (payments per year)C/Y = 12 (compounding periods per year)How to solve for interestTo calculate the interest saved by the extra payment, we need to compare the total interest paid with and without the extra payment. We can start by calculating the various parameters of the mortgage:
N = 25*12 = 300 (total number of payments)
1% = 0.01 (monthly interest rate)
PV = $295,000 (present value or principal)
PMT = $1,639.71 (monthly payment)
P/Y = 12 (payments per year)
C/Y = 12 (compounding periods per year)
Using the above values, we can calculate the total interest paid over the 25-year period without the extra payment:
interest= (PMT * N) - PV
Total interest paid = ($1,639.71 * 300) - $295,000
Total interest paid = $170,313.65
Read more on amortization here:https://brainly.com/question/10561878
#SPJ1
(1 point) Are the following statements true or false? 1. The orthogonal projection p of y onto a subspace W can sometimes depend on the orthogonal basis for W used to compute p ? 2. If the columns of an n x p matrix U are orthonormal, then UUTy is the orthogonal projection of y onto the column space of U 3. For each y and each subspace W, the vector y - projw(y) is orthogonal to W. 4. If z is orthogonal to uz and u2 and if W = span(ui, u2), then z must be in W. ? 5. If y is in a subspace W, then the orthogonal projection of y onto W is y itself.
The first statement is false 2) true 3) true 4) false 5) true
The orthogonal projection p of y onto a subspace W does not depend on the orthogonal basis for W used to compute p, as the projection is unique.
1. False. The orthogonal projection p of y onto a subspace W does not depend on the orthogonal basis for W used to compute p, as the projection is unique.
2. True. If the columns of an n x p matrix U are orthonormal, then UUTy is indeed the orthogonal projection of y onto the column space of U.
3. True. For each y and each subspace W, the vector y - projw(y) is orthogonal to W, as this is the property of orthogonal projections.
4. False. If z is orthogonal to u1 and u2, and W = span(u1, u2), it implies that z is orthogonal to W, not that z must be in W.
5. True. If y is in a subspace W, then the orthogonal projection of y onto W is y itself, as y is already in the subspace and doesn't need to be projected.
learn more about orthogonal projection
https://brainly.com/question/2292926
#SPJ11