Answer:
Relative plate motion describes the motion of one tectonic plate relative to another. Absolute plate motion describes the motion of one plate relative to a fixed reference system.
Explanation:
While the movement of nearby plates has an impact on relative plate velocity, the movement of the entire planet, including the mantle, has an impact on absolute plate velocity.
Multiple tectonic plates interact along the western North American plate boundary, making it a complicated border. A convergent border along the west coast of North America is the result of the Pacific Plate advancing northward in relation to the North American Plate.
The movement of one plate in relation to another is referred to as relative plate velocity. The Pacific Plate is migrating northward compared to the North American Plate in the case of the western North American plate border, with a relative plate velocity between the two plates of roughly 50 mm per year.
The movement of a plate with respect to a fixed location in the mantle is referred to as absolute plate velocity. The Pacific Plate is moving to the northwest in relation to a fixed point in the mantle at an absolute plate velocity of roughly 100 mm per year in the western North American plate border.
Although they are connected, absolute plate velocity and relative plate velocity are not the same.
To know more about Tectonic Plates,
https://brainly.com/question/838446
On his way to mastering the art of scientific, or linear, perspective, Filippo Brunelleschi did all of the following EXCEPT
a. studied the principles of balance and proportion in the works of Euclid and Ptolemy.
b. He unearthed previously unknown ancient Greek and Roman texts on perspective.
c. He surveyed and measured Roman ruins.
d. He investigated the optics of Arabic science.
Your answer: On his way to mastering the art of scientific, or linear, perspective, Filippo Brunelleschi did all of the following EXCEPT b. He unearthed previously unknown ancient Greek and Roman texts on perspective.
Filippo Brunelleschi , considered to be a founding father of Renaissance architecture, was an Italian architect, designer, goldsmith and sculptor, and is now recognized to be the first modern engineer, planner, and sole construction supervisor. In 1421, Brunelleschi became the first person to receive a patent in the Western world. He is most famous for designing the dome of the Florence Cathedral, a feat of engineering that had not been accomplished since antiquity, as well as the development of the mathematical technique of linear perspective in art which governed pictorial depictions of space until the late 19th century and influenced the rise of modern science. His accomplishments also include other architectural works, sculpture, mathematics, engineering, and ship design. His principal surviving works can be found in Florence.
Learn more about Filippo Brunelleschi here:
https://brainly.com/question/11375894
#SPJ11
Labeling theory holds that Select one: a. deviance is both functional and dysfunctional b. deviance is caused by societal inequities caused by capitalism people learn deviance through interaction with significant others C. d. socialization explains gender gaps in arrests society's reaction to behavior is a major factor in defining deviance e. Question 14 PFlag question Points out of 1.00 Not yet answered The inequity caused by diminishes women's control over their lives and increases their invisibility as victims Select one: a. Egalitarianism b. Patriarchy c. Feminism d. Democracy e. Matriarchy
The labelling theory claims that deviance is not inherent in an act, but rather tends to focus on majorities' proclivity to label minorities or those perceived to be deviant from normal cultural norms negatively.
What exactly is labelling theory?This is a social behaviour theory that states that the way other members of society label people influences their behaviour significantly. It has been used to explain a wide range of group social behaviour, including deviant criminal behaviour. The self-fulfilling prophecy is a central feature of labelling theory, in which the labelled correspond to the label in terms of delinquent behaviour. It has been castigated for choosing to ignore the individual's capacity to defy warning labels and assuming that labelling is a natural process.
To know about labelling theory visit:
https://brainly.com/question/30413731
#SPJ1
briefly explain in a couple of sentences why each of these sets of coordinate are incorrect: 1. 98° 7' s, 43° 38' w 2. 59° 25' n, 183° 19' w
The first set of coordinates, 98° 7' s, 43° 38' w, is incorrect because the latitude coordinate should not be greater than 90° (the maximum latitude value is 90° north and 90° south). The second set of coordinates, 59° 25' n, 183° 19' w, is incorrect because the longitude coordinate should not be greater than 180° (the maximum longitude value is 180° east and 180° west).
1. The coordinates 98° 7' S, 43° 38' W are incorrect because the latitude value (98°) is out of range. Latitude can only range from 0° to 90° (north or south), as it measures the distance from the equator.
2. The coordinates 59° 25' N, 183° 19' W are incorrect because the longitude value (183°) is out of range. Longitude can only range from 0° to 180° (east or west), as it measures the distance from the Prime Meridian.
Learn more about Prime Meridian here:
https://brainly.com/question/20573958
#SPJ11
Name country start rich in forest resources
Explanation:
Brazil the united states
Where do valleys tend to form in a landscape?
A)Valleys form where rock layers are resistant to erosion.
B)Valleys form where rock layers are easily erodible (soft).
C)Valleys tend to form where rocks are horizontal.
D)Valleys form where rocks are tilted.
B)Valleys tend to form where rock layers are easily erodible (soft). do valleys tend to form in a landscape
The formation of valleys in a landscape is largely determined by the geology of the area. Valleys form when water or ice erodes the landscape over a long period of time, typically following the path of least resistance. This erosion is most effective where the underlying rock layers are soft or easily erodible, allowing the water or ice to cut through the landscape and form a channel.
Rock layers that are resistant to erosion, such as hard sandstone or granite, are more likely to form ridges or plateaus than valleys. However, valleys can still form in areas where there are differences in the resistance of the rock layers, such as where a soft layer overlies a hard layer.
The orientation of the rock layers, whether they are horizontal or tilted, can also play a role in the formation of valleys. However, this is not a universal rule, and valleys can form in both horizontal and tilted rock layers depending on the specific conditions of the area.
Learn more about Valleys here
https://brainly.com/question/27916620
#SPJ11
Sort the following statements according to whether they describe a winter or summer beach profile. Items (6 items) (Drag and drop into the appropriate area below) The beach becomes narrower. The angle of beach is flatter. The beach builds out a little. Sand is deposited on the beach. The beach angle becomes steeper. Sand is eroded from the beach during frequent storms. Categories Winter Beach Profile Summer Beach Profile Drag and drop here Drag and drop here
During winter, the beach becomes narrower with a steeper angle due to erosion caused by storms, while during summer, the beach angle becomes flatter and builds out a little with sand deposits.
Here's the sorted list of statements according to whether they describe a winter or summer beach profile:
Winter Beach Profile:
1. The beach becomes narrower.
2. The beach angle becomes steeper.
3. Sand is eroded from the beach during frequent storms.
Summer Beach Profile:
1. The angle of the beach is flatter.
2. The beach builds out a little.
3. Sand is deposited on the beach.
Learn more about storms here: brainly.com/question/29808425
#SPJ11
Learning Objectives After completing this lecture Tutorial, students should be able to: distinguish between chemical and physical weathering relate parent material to the type of weathering that is likely to occur. Part 1: Comparison of Chemical and Physical Weathering 1. You put salt (the mineral halite) in hot water. After 10 minutes, can you see the salt in the water Yes No Explain what happens to the salt 2. You put sand (the mineral quartz) in hot water. After 10 minutes, can you see the sand in the water Yes No Explain how the sand in the water is different than the salt.
The learning objectives of this lecture tutorial are to help students distinguish between chemical and physical weathering and to relate parent material to the type of weathering that is likely to occur.
After completing this lecture tutorial, students should be able to distinguish between chemical and physical weathering and relate parent material to the type of weathering that is likely to occur.
Part 1: Comparison of Chemical and Physical Weathering
1. When you put salt (the mineral halite) in hot water, after 10 minutes, you cannot see the salt in the water. This is because the salt undergoes chemical weathering, where it dissolves in the water and forms a homogeneous solution.
2. When you put sand (the mineral quartz) in hot water, after 10 minutes, you can still see the sand in the water. The sand undergoes physical weathering, where it remains as solid particles suspended in the water. The sand is different from the salt because it does not dissolve and remains visible in the water.
Learn more about Physical Weathering here:
https://brainly.com/question/14426457
#SPJ11
the correct sequence of layers of the atmosphere from nearest the earth’s surface upward is:
Answer:
Explanation:From lowest to highest, the major layers are the troposphere, stratosphere, mesosphere, thermosphere and exosphere.
the gunflint microbiota, described by Barghoorn and Cloud, is significant because
A. It was the first shelly fossils in the rock record
B. It was the first fossil find on Earth
C. It is not significant, just a curiosity
D. It was the first Precambrian fossil discovery, hinting at a solution to Darwin's dilemma
E. All of the above
The correct answer is D. The gunflint microbiota, described by Barghoorn and Cloud, is significant because it was the first Precambrian fossil discovery, hinting at a solution to Darwin's dilemma.
It provided evidence for the existence of life on Earth at least 1.9 billion years ago, which helped to address the question of the origin of life and the evolution of complex organisms.
While it was not the first fossil find on Earth, it was one of the earliest and most important in terms of understanding the history of life on our planet. It is not just a curiosity, but a crucial piece of evidence in the study of paleontology and evolution.
To know more about Darwin's dilemma,refer to the link :
https://brainly.com/question/14353066?#
#SPJ11
rocks formed during the earliest parts of earth's history include those that are shattered rock pieces surrounded by a glassy matrix, and metamorphosed ultramafic lava flows called
The shattered rock pieces surrounded by a glassy matrix are known as tuff, which is a type of volcanic rock that forms from explosive volcanic eruptions.
These explosive eruptions release a mixture of ash, pumice, and volcanic bombs, which are rapidly cooled and consolidated to form tuff. Tuff is a common rock type found in the oldest parts of the Earth's crust.
Metamorphosed ultramafic lava flows are called komatiite, which is a rare and unusual rock type that is found in some of the oldest rocks on Earth. Komatiite forms from very hot and fluid lava that erupted from the Earth's mantle during the Archean Eon, between 4 and 2.5 billion years ago.
The lava flows were so hot that they were able to flow for long distances before cooling and solidifying. Over time, these ultramafic lava flows were buried and subjected to high pressures and temperatures, which caused them to undergo metamorphism and transform into komatiite. Today, komatiite is an important rock type for studying the early history of the Earth and the formation of the planet's crust.
To know more about volcanic eruptions visit:
https://brainly.com/question/30028532
#SPJ11
a large opening that goes all the way through a narrow panel of rock is called a . a smaller, but similar opening is called a . these features may form in areas where a narrow panel of rocks, called a , has formed due to weathering controlled by joints on both sides.
A large opening that goes all the way through a narrow panel of rock is called an arch. A smaller, but similar opening is called a natural bridge. These features may form in areas where a narrow panel of rocks, called a fin, has formed due to weathering controlled by joints on both sides. Joints are natural cracks that form in rock, and they can be caused by a variety of factors, including tectonic activity, freezing and thawing cycles, and chemical weathering.
When water, wind, or other erosive forces wear away at the rock surrounding the joints, it can create narrow fins. If the erosion continues, an arch or natural bridge may form when the narrowest part of the fin is worn away completely. These geological formations can be found in many parts of the world, and they provide unique opportunities for exploration and recreation.
They can be found in various landscapes, including coastal areas, deserts, and mountainous regions. Fins, on the other hand, are created when parallel fractures or joints in the rock lead to differential weathering and erosion, resulting in long, thin ridges of rock. Over time, these fins can further erode to form arches and bridges, showcasing the dynamic nature of our planet's geology.
to know more about a large opening that goes all the way through a narrow panel of rock click this link -
brainly.com/question/28981956
#SPJ11
Which of the following patterns of cell phone use can be observed in this chart? A. More people in Germany like to use their phones to take pictures than to send text messages. B. People in Pakistan often use their phones to access the Internet. C. People in Indonesia are just as likely to use their phones to make calls as they are to send text messages. D. People in the United States use their cell phones most to send text messages.
The patterns of cell phone use that is mots correct is B. People in Pakistan often use their phones to access the Internet.
Which patterns of cell phone use are true?According to research, the people in Pakistan often use their cell phones to access the internet as Pakistan Telecommunication Authority found that nearly half of all mobile phone users in the country regularly use their devices to go online.
This trend is expected to continue as the country's mobile network infrastructure expands and more people gain access to affordable smartphones.
Read more about cell phone use
brainly.com/question/23433108
#SPJ1
Step 2: Background information about an area of study You must explain where in South Africa the study area is located. (This can be indicated on the map.) nition (degrees minutes and seconds) sit
The education system in South Africa has a complex history shaped by social, political, and economic factors. It has gone through significant changes over the years, but still faces challenges such as inequality, resource disparities, and high dropout rates.
A research background information on South Africa education:During the apartheid era, education was segregated along racial lines, with separate systems for white, black, colored, and Indian students. The education of black students was severely disadvantaged, with limited resources and poor infrastructure.
After the end of apartheid in 1994, efforts were made to address these inequalities and create a more inclusive and equitable education system. However, challenges persist, including disparities in resources and quality of education between different regions, high dropout rates, and a lack of access to quality education for many marginalized communities.
Additionally, the legacy of apartheid still impacts the education system, with issues such as language policies and curriculum transformation being debated. Despite these challenges, South Africa has made progress in increasing access to education and improving the quality of teaching and learning.
Read more about background information
brainly.com/question/24197526
#SPJ1
What is one major similarity between a Kuiper Belt Object (KBO) and a comet? a. Location in the Solar System: they both stay in the inner solar system b. Observations from Earth: They both have comas and tails c. Size: they may both be the same sizes (from the size of a football field to the size of a county) d. Orbit: they both have nearly circular orbits
One major similarity between a Kuiper Belt Object (KBO) and a comet is their composition. Both KBOs and comets are made of ice, dust, and rocky materials. However, it is important to note that their locations in the Solar System and their orbits differ. KBOs are generally found in the outer Solar System within the Kuiper Belt, while comets can originate from both the Kuiper Belt and the more distant Oort Cloud, and their orbits can bring them closer to Earth and the inner Solar System
Kuiper Belt Objects (KBOs) and comets both originate from the outer Solar System beyond the orbit of Neptune. KBOs are small, icy bodies that are typically composed of frozen gases such as methane, ammonia, and water, as well as rock and dust. They orbit in the Kuiper Belt, a region of the outer Solar System that contains thousands of small icy bodies. Comets, on the other hand, are a type of small Solar System body that are also composed of frozen gases, rock, and dust. They typically originate from the Kuiper Belt or the Oort Cloud, a hypothetical cloud of icy objects that surrounds the Solar System at a distance of up to 100,000 AU. Comets are known for their highly elliptical orbits, which can bring them close to the Sun and then take them out to the far reaches of the Solar System.
Learn more about region here:
https://brainly.com/question/13162113
#SPJ11
describe the relationship between the graphs of f and g. consider amplitude, period, and shifts. f(x)
To describe the relationship between the graphs of functions f(x) and g(x), consider their amplitude, period, and shifts:
1. Amplitude: Compare the heights of the peaks and troughs of both graphs. If the amplitudes are different, specify which function has a larger amplitude.
2. Period: Determine the length of one complete cycle for each graph. If their periods differ, mention which function has a shorter or longer period.
3. Shifts: Observe any horizontal or vertical shifts between the graphs. Identify if one graph is shifted left/right or up/down compared to the other.
By considering these aspects, you can effectively describe the relationship between the graphs of f(x) and g(x).
To learn more about graphs of functions, click here:
https://brainly.com/question/27757761
#SPJ11
NOTE: The above question is incomplete. here's the complete question.
QUESTION: Describe the relationship between the graphs of f and g. consider amplitude, period, and shifts.
You have a special candle that makes a Ruby look black. What would this special candle have more of as compared to a normal candle?A. Blue light wavelengths and few red wavelengthsB. NothingC. Red light wavelengths and few black wavelengthsD. Iron and TitaniumE. Chromium
The special candle that makes a Ruby look black would have more of: Blue light wavelengths and few red wavelength as compared to a normal candle. The correct option is A.
To explain this phenomenon, we need to understand that the color of a gemstone, such as a Ruby, is due to the selective absorption and transmission of specific light wavelengths. Rubies appear red because they absorb blue and green light wavelengths while allowing red light wavelengths to pass through.
In this case, the special candle emits more blue light wavelengths and fewer red wavelengths than a normal candle. As a result, the Ruby appears black because it absorbs most of the blue light from the candle, and there is not enough red light available to be transmitted through the gemstone.
This creates the perception of a black color, as the Ruby is not reflecting any significant amount of light in the visible spectrum back to our eyes.
In summary, the special candle has more blue light wavelengths and few red wavelengths, which leads to the Ruby appearing black due to the absorption of the available light and the lack of red light transmission.
To know more about wavelength, refer here:
https://brainly.com/question/12377285#
#SPJ11
Complete question:
You have a special candle that makes a Ruby look black. What would this special candle have more of as compared to a normal candle?
A. Blue light wavelengths and few red wavelengths
B. Nothing
C. Red light wavelengths and few black wavelengths
D. Iron and Titanium
E. Chromium
The mantle is composed of. A) iron and nickel. B) iron-rich silicate rocks. C) half liquid and half rocky material
D) solid rock.
Answer:
iron Rick silicate rock
Explain why Nigeria moving its capital from legos to Abuja in 1991 is an example of a centripetal force for the country
Nigeria moving its capital from Legos to Abuja in 1991 is an example of a centripetal force for the country because the development is pushed towards the center of the country.
Centripetal force is the force that makes an object move in the direction of the center in a circular path. There will be some force pushing or pulling an object towards the center of the circle.
Nigeria is the richest African country and the capital city was moved to Abuja from Lagos in 1991. Abuja was located in the center of the country and the authorities decided to shift the capital to Abuja from Lagos to concentrate the development more towards the center of the country, which is an example of centripetal force.
Legos was not big enough to make more advancements and it was not structured well and it became very crowdy and dirty. So, they thought of making the development in all the sectors towards the center of the country. Finally, the capital was moved to Abuja in 1991, when Ibrahim Babangida was the head of the state.
To know more about Centripetal force, click on:https://brainly.com/question/14021112
what kinds of events makes relative dating difficult flipping
a)The layers could be flipped.
b)The layer can be folded
c)The layer can be tilted.
d)All of these are potential results of geological movements and can disrupt dating.
Relative dating relies on the assumption that rock layers are deposited in a horizontal position and that they are deposited in chronological order, with the oldest layers at the bottom and the youngest at the top.
The correct answer is d) All of these are potential results of geological movements and can disrupt dating.
However, geological events like folding, tilting, faulting, and erosion can cause the layers to be disrupted, making it difficult to establish the correct sequence of events. Flipping or overturning of layers, folding of rock layers, and tilting of layers can all make relative dating difficult or even impossible. These events can cause older layers to be placed above younger layers, making it difficult to establish the correct sequence of events.
Learn more about “ rock layers “ visit here;
https://brainly.com/question/31215118
#SPJ4
Explain the processes that cause the shape of a beach to have a distinct seasonal cycle.
Answer:
Explanation:
The energy levels of the waves and currents are different in the winter vs. the summer. This affects the beach shape and the amount of sand on the beach. Stronger winter currents leave coarser materials in the winter such as gravel and cobbles.
9. While drilling, the mud is being circulated at 5 bbls/minute. The surface pressure seen at the pumps is 3,500 psi.(2 pts) Assuming the well is 7,375 ft deep, estimate is the bottomhole pressure (at 7,375 ft) under these conditions, assuming the mud weight is 11 ppg? (the bottomhole pressure is the sum of a) the surface pressure and b) the pressure caused by the column of mud in the wellbore)
Estimated bottomhole pressure at a depth of 7,375 ft under the given conditions is 7,545 psi.
To estimate the bottomhole pressure (BHP) at a depth of 7,375 ft, we need to consider the surface pressure and the pressure caused by the column of mud in the wellbore. The pressure caused by the column of mud in the wellbore can be calculated using the formula:Pressure = Mud weight x Depth x 0.052
Where: Mud weight = 11 ppg ,Depth = 7,375 ft ,0.052 = a conversion factor
So, Pressure caused by mud column = 11 x 7,375 x 0.052 = 4,045 psi .To estimate the BHP, we need to add the surface pressure and the pressure caused by the mud column. BHP = Surface pressure + Pressure caused by mud column= 3,500 psi + 4,045 psi = 7,545 psi
Therefore, the estimated bottomhole pressure at a depth of 7,375 ft under the given conditions is 7,545 psi.
To know more about pressure,refer the link:
https://brainly.com/question/29341536#
#SPJ11
what 2 statements about political maps are accurate?
Answer:
Explanation:
1. Political maps depict the boundaries and territories of countries, states or other administrative regions.
2. Political maps typically show the locations of major cities, capital cities, and other important places such as airports, ports, and military bases.
what is the worst possible location of an external surface flaw that could exist in the vessel (remember, neglect end effects)?
The worst possible location of an external surface flaw in a vessel would be at a highly stressed area, such as the mid-section or where the vessel experiences the maximum load.
The worst possible location of an external surface flaw in a vessel would be at a highly stressed area, such as the mid-section or where the vessel experiences the maximum load. In these areas, the presence of a surface flaw could potentially lead to a faster propagation of cracks and, ultimately, a failure of the vessel. Neglecting end effects, this mid-section would be the most critical area for an external surface flaw to occur.
Learn more about surface flaw here
https://brainly.com/question/15041657
#SPJ11
The worst possible location of an external surface flaw in a vessel would be at the point of maximum tensile stress, which typically occurs on the surface of the vessel perpendicular to the applied force or pressure.
In cylindrical vessels, this is typically at the mid-section of the vessel wall, where the stress is highest due to the bending caused by internal pressure. Therefore, if an external surface flaw were to occur at this point, it could potentially propagate and cause a catastrophic failure of the vessel.
It is important to note that other factors, such as the size, shape, and orientation of the flaw, as well as the material properties of the vessel, can also affect the likelihood and severity of failure.
To know more about Advection here
https://brainly.com/question/18803983
#SPJ4
Why is it difficult for countries to balance freedom and equality?
It can be challenging for any country to find a balance between freedom and equality because it is a complex process. The issue comes from the reality that encouraging equality sometimes requires limiting individual freedoms. And, encouraging freedom regularly ends in promoting inequality. Because rewards are reliant on individual efforts and skills, free markets, for example, frequently favour some people over others.
On the other hand, centrally planned economies often distribute resources more fairly, but at the price of restricting personal freedoms like the ability to be self-employed or choose a line of work. To build a stable society where everyone has opportunities and rights without sacrificing one's own preferences or ideas, the right balance must be found.
Governments must create policies that promote equality and freedom while reducing conflicts between them in order to resolve these conflicting objectives. Since no one answer will work in every situation, careful thought and compromise are required.
Therefore, finding a balance between freedom and equality continues to be a major problem for governments all over the world.
Balancing freedom and equality is challenging due to the inherent tension between these two concepts. Achieving both requires careful consideration and often involves trade-offs. Societal and cultural factors can complicate the balancing act.
Explanation:In many countries, balancing freedom and equality can be difficult due to the inherent tension between these two concepts.
Freedom implies the ability to act and make decisions without interference, while equality suggests that individuals should have equal rights and opportunities.
Achieving both can be a challenge because the exercise of freedom by some individuals or groups may result in inequality for others.
For example, guaranteeing freedom of speech may allow individuals to express their opinions freely, but it can also lead to hate speech or discrimination.
On the other hand, enforcing strict equality can limit individual freedoms and stifle innovation.
Striking the right balance between these two values requires careful consideration and often involves trade-offs.
Furthermore, societal and cultural factors can also complicate the balancing act. Different countries have different historical, political, and cultural contexts that shape their understanding of freedom and equality.
What may be considered an acceptable balance in one country may be viewed as imbalanced in another.
Additionally, power dynamics, economic disparities, and social divisions within a country can further complicate efforts to achieve a harmonious balance between freedom and equality.
Learn more about Balancing freedom and equality here:https://brainly.com/question/33178212
#SPJ2
Hi can someone help me with these two discussion post.
Streams that have achieved a graded state can be disrupted through the instigation of abrupt changes in their flow, temperature, or chemical composition.
What is the consequence of this?The catastrophic breach of a dam, for instance, could provene to constitute a radical rise in water and sediment within a particular river, leading to both flooding and erosion farther along its course.
Alternatively, contributing pollutants and wastewater may greatly differ the water chemistry and compromise aquatic life within it. Moreover, shifting climates may perturb stream habitats by morphing their temperatures and water circulation patterns, which consequently alter the species quantity and distribution present.
Read more about chemical compositions here:
https://brainly.com/question/29108029
#SPJ1
In an ancient Indian story, two river gods raced down the side of what snow-covered mountain range?
Answer:
The Himalayas
Explanation:
Pls give me brainliest i beg u i will follow u aswell
Global demand for oil increases by about ____ per year.
a. 2 percent
b. 0.5 percent
c. 25 percent
d. 10 percent
Global demand for oil increases by about A. 2 % per year.
How does oil demand change ?Oil is a key and omnipresent energy source that is critical worldwide. Its widespread use has contributed to an incremental surge in demand over several decades.
Numerous reports confirm that the international desire for oil persists and moves ahead, increasing at roughly 1-2% each year. The principal reason behind this upsurge can be attributed to the rising global population coupled with industrialization and urbanization happening on many fronts across the globe.
Find out more on oil demand at https://brainly.com/question/22411514
#SPJ1
in a sedimentation basin, is a smaller or larger particles settle faster? why? assume the density of particles are the same.
When planning and running a sedimentation basin for the purpose of efficiently removing particles from water, the size of the particles is a crucial issue to take into account.
In a sedimentation basin, larger particles settle faster than smaller particles, assuming that the density of the particles is the same. This is because larger particles have a greater gravitational force acting on them, which allows them to overcome the resistance of the water and settle more quickly. Smaller particles have less gravitational force acting on them and therefore settle more slowly. Additionally, smaller particles tend to have more surface area per unit volume than larger particles, which can make them more buoyant and resistant to settling. Overall, the size of particles is an important factor to consider when designing and operating a sedimentation basin for effective removal of particles from water.
Learn more about particles here
https://brainly.com/question/721988
#SPJ11
encircle the Philippines on the map above
Answer:
these are the philippines
In August 1947, after three hundred years, the British left South
Asia. The subcontinent was partitioned into two independent states:
2. Hindu-majority India and Muslim-majority Pakistan.
Which of the following happened directly after these events?
After the partition of India and Pakistan, Options A. Massive migrations across the border and B. Widespread violence and riots were the events that directly happened.
Millions of Hindus and Muslims migrated across the newly formed border, resulting in one of the largest migrations in history. This led to widespread violence and riots between the two communities, with estimates of hundreds of thousands to millions of deaths.
Option C. Establishment of a democratic government in India, also took place, with India establishing a democratic government led by Jawaharlal Nehru. Option D did not happen, as India and Pakistan became hostile toward each other and engaged in several wars.
Option E didn't happen immediately, as both countries faced the challenges of partition, violence, and instability. However, both countries did experience periods of economic growth and development in the following decades.
To learn more about, Partition of India, visit:
https://brainly.com/question/1134392
Here's the complete question,
In August 1947, after three hundred years, the British left South Asia. The subcontinent was partitioned into two independent states: 1. Hindu-majority India and 2. Muslim-majority Pakistan. Which of the following happened directly after these events?
A. Massive migrations of Hindus and Muslims across the border.
B. Widespread violence and riots between Hindus and Muslims.
C. The establishment of a democratic government in India.
D. The formation of a military alliance between India and Pakistan.
E. A period of economic growth and development in both countries.
The answers are- A. Massive migrations of Hindus and Muslims across the border and B. Widespread violence and riots between Hindus and Muslims.
These were the events that happened directly after the events mentioned in the question.
Hence, option A. and B. are correct.
According to the question, After three hundred years, the British left South Asia in August 1947, Hindu-majority India and Muslim-majority Pakistan were created from the division of the subcontinent into two sovereign republics, what happened after these events, to which the options are-
A. Massive migrations of Hindus and Muslims across the border.B. Widespread violence and riots between Hindus and Muslims.C. The establishment of a democratic government in India.D. The formation of a military alliance between India and Pakistan.E. A period of economic growth and development in both countries.What happened after the events ?After these events, One of the greatest migrations in history occurred when millions of Muslims and Hindus crossed the recently established boundary.
As a result, there was intense fighting and rioting between the two populations, which resulted in tens of thousands to millions of fatalities, according to estimates.
To know more about Partition Of India visit:
https://brainly.com/question/1134392
#SPJ1