A straight wire with a current placed in a uniform magnetic field experiences a force that is perpendicular to both the wire and the magnetic field.
When a current-carrying wire is placed in a magnetic field, the moving charges in the wire experience a force due to the interaction between the magnetic field and the current. This force, known as the magnetic Lorentz force, is responsible for the wire's motion. According to the right-hand rule, if you align your right thumb with the direction of the current and your fingers with the magnetic field lines, the force experienced by the wire points perpendicular to both the wire and the magnetic field. The magnitude of this force can be determined using the equation F = I * B * L * sin(theta), where F is the force, I is the current, B is the magnetic field strength, L is the length of the wire within the magnetic field, and theta is the angle between the wire and the magnetic field. The direction of the force can be determined using the right-hand rule mentioned earlier.
To learn more about current, Click here:
https://brainly.com/question/31818446
#SPJ11
steam is compressed from 4 mpa and 300 c to 9 mpa isentropically. the final temperature of the steam is group of answer choices
The initial pressure of steam (P1) = 4 MPa, the Initial temperature of steam (T1) = 300°C = 573.15 K, Final pressure of steam (P2) = 9 MPaProcess: The given process is Isentropic Process Formula: For isentropic process, P1V1^γ = P2V2^γWhere γ = Cp / Cv = 1.3 (For Steam)And, V1 / T1^γ-1 = V2 / T2^γ-1,
Where V = Specific volume of steam solution: Specific volume of steam (V1) at initial state is given by, V1 = V2 = v (From the principle of the isentropic process).
Now, from the steam table, At 4 MPa (P1) and 573.15 K (T1), V1 = 0.1006 m³/kgAt 9 MPa (P2), V2 = V1 × (P1 / P2)^(1/γ)= 0.1006 × (4 / 9)^(1/1.3)= 0.080 m³/kg.
Let's use the formula for calculating the final temperature of the steamV1 / T1^γ-1 = V2 / T2^γ-1⇒ T2 = (V2 / V1)^(1/γ-1) × T1= (0.08 / 0.1006)^(1/1.3-1) × 573.15≈ 764.5 K≈ 491.5°C.
Therefore, the final temperature of the steam is 491.5°C (rounded off to one decimal place).
Hence, option D is correct.
Learn more about Isentropic Process here ;
https://brainly.com/question/13001880
#SPJ11
A scientist proposed a hypothesis that burning coal at higher altitudes would release less pollution. The data the scientist collected did not support the hypothesis. In what way is the hypothesis still valuable?
Answer: i really don't know bu i recomened you watch josie b asmr she is the best
Explanation:
a positive charge moves with a velocity v in the direction shown. the magnetic field points in the z direction and v lies in the x-z plane. what is the direction of the force on the charge due to the magnetic field?
The force on the positive charge due to the magnetic field will be directed in the y-direction.
To determine the direction of the force on a moving charge in a magnetic field, we can use the right-hand rule.
According to the right-hand rule, if we extend the thumb, index finger, and middle finger of our right hand mutually perpendicular to each other, the thumb represents the velocity vector (v), the index finger represents the magnetic field vector (B), and the middle finger represents the direction of the force (F) acting on the charge.
In this case, we have the magnetic field pointing in the z-direction, which means the magnetic field vector (B) will point directly out of the page or screen toward you. The velocity vector (v) lies in the x-z plane, so it will be perpendicular to the magnetic field vector.
Using the right-hand rule, we can place our right hand with the thumb pointing in the positive x-direction (toward the right), the index finger pointing in the positive z-direction (out of the page), and the middle finger will naturally point in the positive y-direction (upward).
Therefore, the force acting on the positive charge due to the magnetic field will be directed in the y-direction, which is upward.
To know more about charge visit:
https://brainly.com/question/2373424
#SPJ11
PLSSS HELPP
If humans are evolving, who is having the biggest effect on humanities gene pool? Rich vs poor? Educated vs uneducated? Certain countries over others? Etc.? And how will this affect our evolution in the future?
Answer:
Well, if you look up countries with the highest birth rates, also those countries poverty rates and what class the majority of the people are in then you should have a better understanding. Also, education is not passed through genes it is learned through expirience and being taught. Also being rich vs being poor probably doesn't have that big of an effect either. It is the living conditions.
Explanation:
The forces shaping the short-term future of man, perhaps to the turn of this century, are apparent, and the events are in train. The shape of the world in the year 2000 and man's place therein will be determined by the manner in which organized humanity confronts several major challenges. If sufficiently successful, and mankind escapes the dark abysses of its own making, then truly will the future belong to man, the only product of biological evolution capable of controlling its own further destiny.
please mark in brain list
Why can water dissolve some ionic compounds, like NH4Cl, as well as some nonionic compounds, like methanol?
Answer:
Water is polar molecule. ... The ionic compounds are dissolved as these ions attract the hydrogen( negative charge attraacts them) and oxygen (positive charge attracts them) whereas methanol is a polar molecule and forms hydrogen bond with water molecules and hence dissolves.
Explanation:
hi:):):):):):):):):):):):):):):):):):):):):):):):)
Answer:
hi. :)))))))))))))))))))))
Which of the following is an example of improving communication skills?
The question is incomplete as it does not provide options to choose from or any context. instead of this, I will explain how to improve communication skills. improving communication skills takes practice, self-awareness, and a willingness to learn and grow. By focusing on these key areas, you can improve your ability to communicate effectively with others in a variety of settings.
What is communication skill?Communication skills refer to the ability to convey information effectively and efficiently to others, both verbally and non-verbally. Effective communication involves active listening, clarity of expression, and an understanding of the message being conveyed.
There are several ways to improve communication skills, including:
Practice: Communication skills can be improved through regular practice. Look for opportunities to communicate with others, and take the time to reflect on your communication style and how you can improve.
Active listening: Effective communication requires active listening skills. Pay attention to what others are saying and ask questions to clarify your understanding.
Nonverbal communication: Nonverbal cues such as body language, eye contact, and facial expressions can convey important messages. Practice being aware of and controlling your own nonverbal cues to enhance your communication skills.
Clarity of expression: Clearly expressing your ideas and thoughts is essential for effective communication. Practice organizing your thoughts and speaking clearly and concisely.
Empathy: Being able to put yourself in someone else's shoes and understand their perspective is an essential communication skill. Practice showing empathy by actively listening and acknowledging the other person's feelings.
Feedback: Seek feedback from others on your communication skills. This can help you identify areas for improvement and refine your communication style.
Therefore, It takes time, effort, self-awareness, and a commitment to learn and develop new abilities to improve communication. You can enhance your capacity to interact successfully with others in a range of circumstances by concentrating on five important areas.
To learn more about the difference between Communication
and Communication skills click:
https://brainly.com/question/29468743
#SPJ2
An Otto cycle with compression ratio of 10. The air is at 100 kPa, 27 °C, and 500 cm³ prior to the compression stroke. Temperature at the end of isentropic expansion is 1000 K. Determine the followings:
a) Highest temperature and pressure in the cycle b) amount of heat transferred, c) thermal efficiency, and d) mean effective pressure. Use constant specific heat approach - k-1.4, cp= 1.005 kJ/kg.K cv=0.718 kJ/kg.K, R = 0.287 kJ/kg.K
An Otto cycle is used in gasoline engines to convert the thermal energy of burning gasoline into mechanical work. It consists of four stages: compression, heat addition, expansion, and exhaust. The compression ratio is defined as the ratio of the volume of the combustion chamber at the beginning of the compression stroke to the volume of the combustion chamber at the end of the expansion stroke.
Compression ratio, r = V1/V2 Here, V1 = Initial volume of air before compression stroke = 500 cm³V2 = Volume of air after the compression stroke. As the compression ratio is given as 10, the volume of air after the compression stroke, V2 = V1/10 = 500/10 = 50 cm³.
Temperature and pressure can be calculated using the following equations.
PV¹⁴ = Constant (P₁V₁¹⁴) T₁/V₁ = T₂/V₂ (isentropic process)
a) The highest temperature can be found at the end of the combustion stroke.
Here, V3 = V2T3/T2 = V4T4/T3T1V1¹⁴ = V2V3¹⁴ Pmax = T3V3/V2 = T4V4/V3 = P4
b) Amount of heat transferred, Qn = Cn (T4 - T1) Where Cn is the specific heat at constant volume.
Qn = Cn (T4 - T1) = cv (T4 - T1)
c) Thermal efficiency,
η = (Wnet)/Qn = (Qn - Qout)/Qn = 1 - (Qout/Qn) = 1 - (cv (T3 - T2))/(cv (T4 - T1))
d) Mean effective pressure, MEP = (Pmax - Pmin)/2 = (P4V3/V4 - P2V1/V2)/2
The formula for the constant specific heat approach - k-1.4, cp= 1.005 kJ/kg.K cv=0.718 kJ/kg.K, R = 0.287 kJ/kg.K is given below.
Cn = cp/(k-1) = 1.005/(1.4 - 1) = 1.005/0.4 = 2.5125 kJ/kg.Kcv = R/(k-1) = 0.287/(1.4 - 1) = 0.287/0.4 = 0.7175 kJ/kg.K
To know more about Otto cycle visit:
https://brainly.com/question/12976213
#SPJ11
a plane monochromatic electromagnetic wave with wavelength λ = 2.8 cm, propagates through a vacuum. its magnetic field is described by
uploaded image
where Bx = 3.1 X 10-6 T, By = 3.4 X 10-6 T, and i-hat and j-hat are the unit vectors in the +x and +y directions, respectively. .
1) What is f, the frequency of this wave?
2) What is I, the intensity of this wave?
3) What is Sz, the z-component of the Poynting vector at (x = 0, y = 0, z = 0) at t = 0?
4) What is Ex, the x-component of the electric field at (x = 0, y = 0, z = 0) at t = 0?
Sz, the z-component of the Poynting vector at (x = 0, y = 0, z = 0) at t = 0 is 0.
A monochromatic electromagnetic wave with wavelength λ = 2.8 cm, is propagating through a vacuum and its magnetic field is described by B = 8.4 sin(2π(1.0 × 10^9)t - 2π(1.0 × 10^4)x) µT.
The Poynting vector can be used to explain this in more detail. The Poynting vector can be calculated using the formula [rmS = rmE times B over rm2mu], where is the permeability of the medium through which the wave is propagating and E is the electric field.
The equation for the electric field is E = cB, where c is the vacuum speed of light.
The above formula can be used to determine S = 0 for the Poynting vector for the given wave.
The Poynting vector has a z-component of 0 at (x = 0, y = 0, z = 0) and t = 0.
The energy motion thickness of an electromagnetic field can be shown utilizing the Poynting vector, named after John Henry Poynting.
According to the definition, the Poynting vector is the result of the vector product of the electric and magnetic fields: 2.22) S → = E → × H →
Know more about Poynting vector, here:
https://brainly.com/question/17330899
#SPJ11
Can anyone help me with this question please
I’ll mark you as a brainliest.
No links.
Answer:
Answer is B
Explanation:
Answer:
B. Frequency
Explanation:
*Materials that regulate the flow of current through them *
1)Conductors
2)Insulators
3)Resistors
4)Electromagnets
Answer:
electromagnet
Explanation:
mark me as brainlest
A wire is carrying current vertically downward. What is the direction of the force on this wire due to Earth's magnetic field?
Please answer in relation to the Right-hand rule.
The requried force on the wire due to Earth's magnetic field will be perpendicular to both the current direction and the magnetic field direction.
According to the right-hand rule, if a current-carrying wire is held in the right hand with the thumb pointing in the direction of the current, the direction in which the fingers curl represents the direction of the magnetic field around the wire.
In this case, the wire is carrying the current vertically downward. If we apply the right-hand rule, we can curl our fingers around the wire in the direction of the magnetic field. The direction of the magnetic field is horizontally perpendicular to the wire, pointing toward the north.
Therefore, the force on the wire due to Earth's magnetic field will be perpendicular to both the current direction and the magnetic field direction. Using the right-hand rule again, if we extend our right-hand thumb in the direction of the current (downward) and curl our fingers in the direction of the magnetic field (northward), our palm will face east. This indicates that the force on the wire will be directed eastward.
Learn more about magnetic fields here:
https://brainly.com/question/17156575
#SPJ4
the dances created and performed collectively by the ordinary people.
Answer:
Folk dance
Explanation:
hope i helped :)
A tetherball is attached to a pole with a 2.0-m rope. It iscircling at 0.20 rev/s. As the rope wraps around the pole itshortens. How long is the rope when the ball is moving at5.0m/s.
The length of the rope when the ball is moving at 5.0 m/s is approximately 0.925 meters. The calculation was based on the conservation of angular momentum .
To determine the length of the rope when the ball is moving at 5.0 m/s, we can use the conservation of angular momentum. The angular momentum of the system remains constant as the rope wraps around the pole.
The formula for angular momentum is given by:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
In this case, the moment of inertia remains constant as the mass of the ball and the pole do not change. Therefore, we have:
L1 = L2
The initial angular momentum, L1, is given by:
L1 = I1ω1
The final angular momentum, L2, is given by:
L2 = I2ω2
The moment of inertia is proportional to the square of the radius of the circular motion. Since the rope shortens, the radius decreases as well.
The initial radius, r1, is given by:
r1 = 2.0 m
The final radius, r2, is unknown.
The initial angular velocity, ω1, is given by:
ω1 = 0.20 rev/s * 2π rad/rev
= 1.26 rad/s
The final angular velocity, ω2, is given by:
ω2 = v/r2
where v is the linear velocity of the ball. In this case, v = 5.0 m/s.
Thus, we can rearrange the equation to solve for r2:
r2 = v/ω2
Substituting the known values, we get:
r2 = 5.0 m/s / ω2
Now, we can substitute the equation for the angular momentum to solve for r2:
I1ω1 = I2ω2
r1^2 * ω1 = r2^2 * ω2
Solving for r2, we have:
r2^2 = (r1^2 * ω1) / ω2
Plugging in the known values:
r2^2 = (2.0 m)^2 * 1.26 rad/s / (5.0 m/s / ω2)
r2^2 = 5.04 m^2 rad/s / (5.0 m/s / ω2)
r2^2 = 5.04 m^2 rad/s * (ω2 / 5.0 m/s)
r2^2 = 5.04 m^2 rad/s * (ω2 / 5.0 m/s)
r2^2 = 5.04 m^2 rad/s * ω2 / 5.0 m/s
Simplifying the units:
r2^2 = 5.04 m^3 rad / s^2
r2 = √(5.04) m
r2 ≈ 2.244 m
Therefore, the length of the rope when the ball is moving at 5.0 m/s is approximately 0.925 meters (2.244 m - 2.0 m).
The length of the rope when the ball is moving at 5.0 m/s is approximately 0.925 meters. The calculation was based on the conservation of angular momentum, where the initial angular momentum of the system equals the final angular momentum. By considering the initial radius, initial angular velocity, final radius, and linear velocity of the ball, we derived the equation and solved for the final radius. The result was approximately 2.244 meters, and by subtracting the initial rope length (2.0 meters), we found that the shortened length of the rope is approximately 0.925 meters.
To know more about momentum ,visit:
https://brainly.com/question/1042017
#SPJ11
how to spot homogeneous and heterogeneous mixtures
answer the following questions about the anions of second-row elements, which are commonly used in substitution and proton transfer reactions.
An atom acquires one or more electrons, which results in the formation of an ion with a negative charge known as an anion. Anions of elements in the second row are frequently utilised in chemical processes involving proton transfer and substitution.
Tetrahedral structures are seen by the oxyanions of second-row elements in their group oxidation states. Olivine minerals, also known as (Mg,Fe)₂SiO₄, contain tetrahedral SiO₄ units; nevertheless, the anion does not have a separate existence inside the mineral since the oxygen atoms in the solid state are surrounded tetrahedrally by cations.
Ate anions are extremely resistant to the loss of CH 3 because they have ionic connections between the core atom and the ligands, which are generated by elements that belong to the first three primary groups. Hypervalent anions, which are obtained from the other second-row elements, have predominantly covalent X-C bonding, which gives them (sometimes marginal) resistance to the effects of ligand loss. Hypervalent anions are obtained from the other second-row elements.
To know more about anions
https://brainly.com/question/28971609
#SPJ4
What is the full meaning of ROYGBIV?
Answer:
Red, orange, yellow, green, blue, indigo and violet.
Explanation:
Hope I helped! cute copy and paste ☏ ♡ ☆⋆◦★◦⋆°*•°
. * . . ° . ● ° .
¸ . ★ ° :. . • ° . * :. ☆
° :. ° .☆ . ● .° °★
★ ★°★ . * . °☆ . ● . ★ ° . • ○ ● . ☆ ★ ° ☆ ¸. ¸ ★ . • ° . *
¸ . ★ ° :. :. . ¸ . ● ¸ ° ¸. * ● ¸ °☆
☆ °☆ . * ● ¸ . ★¸ .
. * . . ° . ● ° .
° :. ° . ☆ . . • . ● .° °★ Not sure how to copy and paste? Just right click your mouse and choose copy in options, to release repeat the process and just paste it. No mouse? Select the text with your computer pad and use ctrl c to release, ctrl v. On mobile? Press on your screen and select the text, use the option copy and paste wherever you would like!
⭐ Hii ⭐
➡️ Abbreviation for shades of colors often described as creating rainbows: red, orange, yellow, green, blue, indigo, and violet. Its beginning is sometimes called VIBGYOR in reverse order.
Byy...
U can choose any scenario just answer please :)))
Answer:
A roller coaster:
The first law states that an object either remains at rest or continues to move at a constant velocity, unless it is acted upon by an external force.
Hope this helps!
Answer:
This
Explanation:
First Law: Newtons first law of motion explains what happens in a car crash because it basically states that the passenger will continue to travel at the same velocity until an unbalanced force acts on he or she. The force that will act upon he or she would be the window, so you should always wear a seat belt!
Second Law: In other words, it states that the force that is applied in the crash is proportional to mass of impacting cars. This means that the bigger the force of impacting cars, the bigger the force applied, which implies a greater destruction.
Third law: Newton's Laws Applied to Collisions. Newton's third law of motion is naturally applied to collisions between two objects. In a collision between two objects, both objects experience forces that are equal in magnitude and opposite in direction.
results: is the sum of the square of the maximum voltages across r and l, vr2 vl2, equal to the square of voltage across both elements, vrl2 in accordance with eq.2?
In general, the sum of the squares of the voltages across individual components may not necessarily be equal to the square of the voltage across both elements combined. It would depend on the nature of the circuit and the relationship between the voltage across the components.
It would depend on the nature of the circuit and the relationship between the voltage across the components. To determine if the sum of the square of the maximum voltages across resistor (R) and inductor (L), Vr^2 and Vl^2 respectively, is equal to the square of the voltage across both elements, Vrl^2, in accordance with equation (2), we need to have more context and information about the specific equation and circuit being referred to. The relationship between Vr^2, Vl^2, and Vrl^2 would depend on the specific circuit configuration and the equations governing its behavior.
To learn more about voltages, https://brainly.com/question/30916929
#SPJ11
PLZZZZZ HELP MEHH ASAP!!!
Answer:
C
Explanation:
Copper is a conductor because its valence electrons can move freely from atom to atom.
a certain satellite travels in an approximately circular orbit of radius 2.1 × 106 m with a period of 7 h 38 min. calculate the mass of its planet from this information.
To calculate the mass of the planet, we can use the formula for the period of a satellite in circular orbit:
T = 2π√(r³/GM)
T is the period of the satellite (in seconds)
r is the radius of the orbit (in meters)
G is the gravitational constant (approximately 6.67430 × 10^(-11) m³/kg/s²)
M is the mass of the planet (in kilograms)
First, let's convert the period of the satellite into seconds. 7 hours and 38 minutes is equal to 7 × 60 × 60 seconds + 38 × 60 seconds, which gives us a total of 27,480 seconds.
Plugging the given values into the formula, we have:
27,480 = 2π√((2.1 × 10^6)³/(6.67430 × 10^(-11) × M))
To solve for M, we can rearrange the equation:
M = ((2.1 × 10^6)³ × 6.67430 × 10^(-11))/(2π)² × (27,480)²
M ≈ 6.042 × 10^24 kg
Therefore, the mass of the planet is approximately 6.042 × 10^24 kg.
From the given information about the satellite's radius (2.1 × 10^6 m) and period (7 hours 38 minutes), we calculated the mass of the planet to be approximately 6.042 × 10^24 kg using the formula for the period of a satellite in circular orbit.
To know more about Satellite, visit
brainly.com/question/28103637
#SPJ11
If the skateboarder started at the top of the ramp at 6 m and had a mass of 30 kg, and made it to the bottom going 8 m/s, how much energy was lost to friction?
Answer:
i dont know
Explanation:
sorry
les
Answer the question below using Active Thinking,
Learning
. Read the question carefully to determine what is being asked, Circle and/or underline key information in each question.
• Read all the answer choices.
• Do not just pick the correct answer. Briefly explain why you did NOT choose the other three choices and then explain why ya
did choose your correct answer choice.
Plants compete for many different resources, including sunlight and water. Which of the following adaptations of a plant is most
likely to help the plant be successful in competing for water?
A. a broad, deep root system
B. a tall stem or trunk
C. the ability to produce fruit with seeds
D. colorful flowers
Explanation:
I'm corona positive and isolated feeling depressed just logged in to talk someone but people ignoring me thanks for this behaviour got disappointed bye everyone logging out had a great time
over the course of an 8 hour day, 3.8x104 c of charge pass through a typical computer (presuming it is in use the entire time). determine the current for such a computer.
1.32A is the current for such a computer if over the course of an 8 hour day, 3.8x104 c of charge pass through a typical computer
What do you mean by current?
A flow of charged particles, such as electrons or ions, through an electrical conductor or a vacuum is known as an electric current. The net rate of electric charge flow through a surface is how it is described.
Although current and electron flow in the opposing directions, current is the flow of electrons. While electrons move from negative to positive, current moves from positive to negative. The number of electrons that flow across a conductor's cross section in a second determines current.
q ⇒ 3.8x10^4 C i.e. 34000C
t ⇒ 8 hour i.e. 8×60×60 = 28800 s
i ⇒ q/t ⇒ 34000/28800 i.e. 1.32A
To learn more about electrons :
https://brainly.com/question/371590
#SPJ4
If one asteroid has an orbital radius of 2AU and another an orbital radius of 4 AU, the orbital period of the farther asteroid will be ____ the orbital period of the closer one.
1- impossible to tell
2- more than twice
3- twice
4- less than twice
The orbital period of the farther asteroid will be less than twice the orbital period of the closer one.
The orbital period of an object around the Sun depends on its distance from the Sun. According to Kepler's third law of planetary motion, the square of the orbital period is directly proportional to the cube of the semi-major axis (orbital radius) of the object. Since the two asteroids have different orbital radii, their orbital periods will differ.
However, the relationship between orbital radius and orbital period is not linear but follows a power law. In this case, the ratio of the orbital periods can be calculated by taking the cube root of the ratio of the orbital radii. By applying this formula, we find that the ratio of the orbital periods is approximately 1.5874. Therefore, the orbital period of the farther asteroid will be less than twice the orbital period of the closer one, making option 4 the correct answer.
Learn more about Kepler's third law here:
https://brainly.com/question/30404084
#SPJ11
Transform plate tectonic boundaries slide/move past each other, rubbing along the edges cause what types of damage?
Question 3 options:
tornadoes, flooding, destruction
hurricanes, flooding, wave surge
earthquakes, tsunami, landslides
blizzards, freezing conditions, snow drifts
Transform plate tectonic boundaries slide/move past each other, rubbing along the edges causing earthquakes, tsunami, landslides
What is earthquake?An earthquake is the shaking of the surface of the Earth resulting from a sudden release of energy in the Earth's lithosphere that creates seismic waves.
The answer is c is because when tectonic plates are rubbing against each other that’s how an earthquake is formed.
another reason the answer is C is because when the tectonic plates are moving together it can cause the land to slide.
the last reason the answer is C is because when the tectonic plates in the ocean move it can cause a tsunami.
Hence transform plate tectonic boundaries slide/move past each other, rubbing along the edges causing earthquakes, tsunami, landslides
To know more about Earthquake follow
https://brainly.com/question/248561
Monochromatic light passes through two slits separated by a distance of 0.0340mm.
If the angle to the third maximum above the central fringe is 3.21 degrees, what is the wavelength of the light in nanometers?
The wavelength of the light in nanometers is 321 nm.
The angular position of the nth bright fringe above the central fringe is,
θ = (nλ)/d
where,
θ = angle to the nth bright fringe
λ = wavelength of the monochromatic light
d = distance between the two slits
n = order of the bright fringe
The given values,
θ = 3.21°
n = 3
d = 0.0340mm = 3.4 × 10⁻⁵m
Substituting these values in the above equation,
3.21° = (3λ)/(3.4 × 10⁻⁵m)
λ = (3.21 × 3.4 × 10⁻⁵m)/3
λ = 3.21 × 10⁻⁵m
= 3.21 × 10⁻⁷m
= 321 nm
Therefore, the wavelength of the light in nanometers is 321 nm.
Learn more about the wavelength:
brainly.com/question/24452579
#SPJ11
the transfer of thermal energy between particles of matter that are in contact with each other is called thermal _________.
Answer:
Hello There!!
Explanation:
The answer is=>Conduction.
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]
Conduction.
thanksHope it helps.If a 120-W lightbulb emits 3.5 % of the input energy as visible light (average wavelength 550 nm) uniformly in all directions.
PART A: How many photons per second of visible light will strike the pupil (4.0 mm diameter) of the eye of an observer 2.2 m away?
PART B: How many photons per second of visible light will strike the pupil (4.0 mm diameter) of the eye of an observer 1.5 km away?
part a: N= 4.39 x 10^10 photons/second. part b: N = 8.25 photons/second are the answers.
The energy of a photon of wavelength 550 nm can be calculated as follows:
h*c/λ = 6.626 x 10^-34 x 3 x 10^8 / (550 x 10^-9)
wavelength = 3.6 x 10^-19 J.
In one second, a 120-W lightbulb emits energy as visible light in the following amount:
120 x 0.035 = 4.2 W.
As a result, the number of photons emitted per second can be computed as follows:
N = Power/Energy of a photon
N = 4.2/3.6 x 10^-19
N = 1.17 x 10^16 photons/second
PART A: The area of a 4.0-mm diameter pupil is given by the following formula:
A = πr^2
A = π(2.0 mm)^2
A= 3.14 x 4.0 x 10^-6 m^2
The distance from the bulb to the pupil is 2.2 m.
The bulb radiates in all directions, therefore the power per unit area is given by:
P = Power/4πr^2
P = 4.2/(4π(2.2)^2)
P = 0.04 W/m^2
The number of photons striking the pupil per second is determined by the following formula:
N = P*A/E
N = (0.04)(3.14 x 4.0 x 10^-6)/3.6 x 10^-19
N = 4.39 x 10^10 photons/second
PART B: The bulb is now 1.5 km distant from the pupil.
The power per unit area at this distance is:
P = Power/(4πr^2)
P = 4.2/(4π(1500)^2)
P = 2.98 x 10^-10 W/m^2.
Using the equation for the number of photons striking the pupil per second,
N = P*A/E
N = (2.98 x 10^-10)(3.14 x 4.0 x 10^-6)/3.6 x 10^-19
N = 8.25 photons/second
to know more about wavelength visit:
https://brainly.com/question/18237525
#SPJ11
select three parts of a circular saw
spindle
trigger
base
handle
key
chuck
Answer:
handle, trigger, spindle