find the general solution of the given system. dx dt = − 5 2 x 4y dy dt = 3 4 x − 3y

To negate the statement "Prices are high if and only if supply is low and demand is high," you would say:

"Prices are not high if and only if either supply is not low or demand is not high."

we are asserting that it is not necessarily true that high prices only occur when supply is low and demand is high. It allows for the possibility that high prices can happen under different circumstances, such as when supply is not low or demand is not high.

These words are very true. In job markets, prices are determined by supply and demand. When the demand for a particular quality or service for their products is high, prices will rise. Conversely, prices will fall when supply exceeds demand.

So if a product is in short supply, the price will be higher because consumers are willing to pay more for that product.

On the other hand, if there is a shortage of products, prices will be low because producers will have to lower their prices to attract buyers.

To know more about demands:

https://brainly.com/question/29703449

#SPJ11

The volume of the balloon at its highest point is approximately 80 times greater than its volume at sea level.

We can start by using the formula for the volume of a sphere:

V = (4/3) * π * r³

where V is the volume and r is the radius of the sphere. Since the diameter of the balloon at sea level is 8 feet, the radius is 4 feet.

Therefore, the volume of the balloon at sea level is:

V₁ = (4/3) * π * (4³) = 268.08 cubic feet (rounded to the nearest hundredth)

Similarly, at its highest point, the diameter of the balloon is 32 feet, so the radius is 16 feet. The volume of the balloon at its highest point is then:

V₂ = (4/3) * π * (16³) = 21,493.33 cubic feet (rounded to the nearest hundredth)

To find how many times greater the volume is at its highest point, we can divide V₂ by V₁:

V₂/V₁ = 21,493.33/268.08 = 80.15

To learn more about volume click on,

https://brainly.com/question/14764487

#SPJ1

The width of the larger cell phone: [tex]W_{2}=\frac{(W_{1} *L_{2})}{L_{1} }[/tex]

Length is a measure of the size of an object in one dimension. It refers to the distance between two points, usually measured in units such as meters, feet, inches, or centimetres.

Width is a measure of the size of an object in one dimension, specifically the distance between its two sides that are parallel to each other. It is usually considered the shorter of the two dimensions, the other being length.

Since the length and width of the two cell phones are proportional, we can express this relationship using a proportion. Let [tex]L_{1}[/tex] and [tex]W_{1}[/tex] be the length and width, respectively, of the smaller cell phone, and let [tex]L_{2}[/tex] and [tex]W_{2}[/tex] be the length and width, respectively, of the larger cell phone. Then we have:

[tex]\frac{L_{1} }{W_{1} } =\frac{L_{2} }{W_{2} }[/tex]

We can rearrange this equation to solve for the width of the larger cell phone:

[tex]W_{2}=\frac{(W_{1} *L_{2})}{L_{1} }\\[/tex]

To know more about the length visit:

https://brainly.com/question/2217700

#SPJ1

The divergence ▽-F and the curl ▽ × F of the vector field.

F = [tex](3xye^z, -2y^2ze^z, 5xe^z)[/tex]

▽-F = <[tex]3ye^z - 4yze^z + 5xe^z[/tex]>

▽ × F =  <[tex]5xe^z, 3xe^z + 4yze^z, -6yze^z[/tex]>

To compute the divergence ▽-F and the curl ▽ × F of the vector field F = <[tex]3xye^z, -2y^2ze^z, 5xe^z[/tex]>:
First, let's find the divergence:
▽·F = (∂/∂x)([tex]3xye^z[/tex]) + (∂/∂y)([tex]-2y^2ze^z[/tex]) + (∂/∂z)([tex]5xe^z[/tex])
    = [tex]3ye^z + (-4yze^z) + (5xe^z)[/tex]
    = [tex]3ye^z - 4yze^z + 5xe^z[/tex]
Therefore, ▽-F = <[tex]3ye^z - 4yze^z + 5xe^z[/tex]>
Next, let's find the curl:
▽×F = ( (∂/∂y)([tex]5xe^z[/tex]) - (∂/∂z)([tex]-2y^2ze^z[/tex]) ) i
         + ( (∂/∂z)[tex](3xye^z)[/tex] - (∂/∂x)[tex](-2y^2ze^z)[/tex] ) j
         + ( (∂/∂x)[tex](-2y^2ze^z)[/tex] - (∂/∂y)[tex](3xye^z)[/tex] ) k
       = [tex](5xe^z)[/tex] i + [tex](3xe^z + 4yze^z)[/tex] j + [tex](-6yze^z)[/tex] k
Therefore, ▽×F = <[tex]5xe^z, 3xe^z + 4yze^z, -6yze^z[/tex]>
Note that in this notation, i, j, and k represent the unit vectors in the x, y, and z directions, respectively.

The complete question is:-

Compute the divergence ▽-F and the curl ▽ × F of the vector field. (Your instructors prefer angle bracket notation < > for vectors.)

F = [tex](3xye^z, -2y^2ze^z, 5xe^z)[/tex]

▽-F = _______

▽ × F = _______

Submit Answer

To learn more about vector field, refer:-

https://brainly.com/question/14122594

#SPJ11

The divergence ▽-F and the curl ▽ × F of the vector field.

F = [tex](3xye^z, -2y^2ze^z, 5xe^z)[/tex]

▽-F = <[tex]3ye^z - 4yze^z + 5xe^z[/tex]>

▽ × F =  <[tex]5xe^z, 3xe^z + 4yze^z, -6yze^z[/tex]>

To compute the divergence ▽-F and the curl ▽ × F of the vector field F = <[tex]3xye^z, -2y^2ze^z, 5xe^z[/tex]>:
First, let's find the divergence:
▽·F = (∂/∂x)([tex]3xye^z[/tex]) + (∂/∂y)([tex]-2y^2ze^z[/tex]) + (∂/∂z)([tex]5xe^z[/tex])
    = [tex]3ye^z + (-4yze^z) + (5xe^z)[/tex]
    = [tex]3ye^z - 4yze^z + 5xe^z[/tex]
Therefore, ▽-F = <[tex]3ye^z - 4yze^z + 5xe^z[/tex]>
Next, let's find the curl:
▽×F = ( (∂/∂y)([tex]5xe^z[/tex]) - (∂/∂z)([tex]-2y^2ze^z[/tex]) ) i
         + ( (∂/∂z)[tex](3xye^z)[/tex] - (∂/∂x)[tex](-2y^2ze^z)[/tex] ) j
         + ( (∂/∂x)[tex](-2y^2ze^z)[/tex] - (∂/∂y)[tex](3xye^z)[/tex] ) k
       = [tex](5xe^z)[/tex] i + [tex](3xe^z + 4yze^z)[/tex] j + [tex](-6yze^z)[/tex] k
Therefore, ▽×F = <[tex]5xe^z, 3xe^z + 4yze^z, -6yze^z[/tex]>
Note that in this notation, i, j, and k represent the unit vectors in the x, y, and z directions, respectively.

The complete question is:-

Compute the divergence ▽-F and the curl ▽ × F of the vector field. (Your instructors prefer angle bracket notation < > for vectors.)

F = [tex](3xye^z, -2y^2ze^z, 5xe^z)[/tex]

▽-F = _______

▽ × F = _______

Submit Answer

To learn more about vector field, refer:-

https://brainly.com/question/14122594

#SPJ11

The zeros of the function f(x)=4x(9x + 8)(2x + 5)(x +√6)(x−√6) with its multiplicities are 0, 8/9, 5/2; each of multiplicity 1; and 6 of multiplicity 2. Therefore, option d. is correct.

The zeros of the function f(x)=4x(9x + 8)(2x + 5)(x +√6)(x−√6) are:

a. 0, -8/9, -5/2; each of multiplicity 1; and √6 of multiplicity 2

This means that the function crosses the x-axis at x=0, x=-8/9, and x=-5/2, and each of these zeros has a multiplicity of 1. Additionally, the zeros x=√6 and x=-√6 are both roots of multiplicity 2, meaning that the function touches the x-axis at these points but does not cross it.

b. 0, -8/9, +5/2; each of multiplicity 1

This is not correct because the root 2x+5=0 leads to x=-5/2, which is a root with multiplicity 1. Therefore, the correct answer cannot include +5/2 as a zero.

c. 0, 8/9, 5/2; each of multiplicity 1

This is also incorrect because the function does not have a factor of (x-5/2), so x=5/2 cannot be a root.

d. 0, 8/9, 5/2; each of multiplicity 1; and 6 of multiplicity 2

This is the correct answer because it includes the roots 0, 8/9, and 5/2 with multiplicities of 1, as well as the root x=√6 with multiplicity 2.

Learn more about function:

https://brainly.com/question/22340031

#SPJ11

The zeros of the function f(x)=4x(9x + 8)(2x + 5)(x +√6)(x−√6) with its multiplicities are 0, 8/9, 5/2; each of multiplicity 1; and 6 of multiplicity 2. Therefore, option d. is correct.

The zeros of the function f(x)=4x(9x + 8)(2x + 5)(x +√6)(x−√6) are:

a. 0, -8/9, -5/2; each of multiplicity 1; and √6 of multiplicity 2

This means that the function crosses the x-axis at x=0, x=-8/9, and x=-5/2, and each of these zeros has a multiplicity of 1. Additionally, the zeros x=√6 and x=-√6 are both roots of multiplicity 2, meaning that the function touches the x-axis at these points but does not cross it.

b. 0, -8/9, +5/2; each of multiplicity 1

This is not correct because the root 2x+5=0 leads to x=-5/2, which is a root with multiplicity 1. Therefore, the correct answer cannot include +5/2 as a zero.

c. 0, 8/9, 5/2; each of multiplicity 1

This is also incorrect because the function does not have a factor of (x-5/2), so x=5/2 cannot be a root.

d. 0, 8/9, 5/2; each of multiplicity 1; and 6 of multiplicity 2

This is the correct answer because it includes the roots 0, 8/9, and 5/2 with multiplicities of 1, as well as the root x=√6 with multiplicity 2.

Learn more about function:

https://brainly.com/question/22340031

#SPJ11

The critical value of a one-tailed t-test with degrees of freedom of 8 and using an alpha level of 0.01 is approximately 2.896.

To find the critical value of a one-tailed t-test with degrees of freedom (df) = 8 and an alpha level of 0.01, follow these steps:

1. Identify the degrees of freedom (df): In this case, df = 8.
2. Determine the alpha level: Here, the alpha level is 0.01.
3. Check a t-distribution table for the critical value corresponding to the given degrees of freedom and alpha level.

Using a t-distribution table, the critical value for a one-tailed t-test with df = 8 and an alpha level of 0.01 is approximately 2.896.

Your answer: The critical value of a one-tailed t-test with degrees of freedom of 8 and using an alpha level of 0.01 is approximately 2.896.

Learn more about one-tailed t-test

brainly.com/question/30818311

#SPJ11

Answer:

To solve this problem, we can use the formula:

number of workers * time = amount of work

Let's call the amount of work required to complete the project "W". Then, we know that:

20 workers * 35 days = W

To finish the project 10 days earlier, we need to reduce the time required to complete the project to 25 days. Using the same formula, we get:

(number of workers + x) * 25 days = W

where "x" is the number of extra workers needed to finish the project 10 days earlier.

We can set these two equations equal to each other, since they both represent the same amount of work:

20 workers * 35 days = (number of workers + x) * 25 days

Expanding the equation, we get:

700 = 25(number of workers + x)

Dividing both sides by 25, we get:

28 = number of workers + x

Subtracting 20 from both sides, we get:

x = 8

Therefore, we need to hire 8 extra workers to finish the project 10 days earlier.

1) If sec ( θ ) = 17/ 8, 0 ≤ θ ≤ 90, then:

sinθ = 8/17, cosθ = 15/17, tanθ = 8/15

2) The value of sin ^2 x+cos ^2 x for x = 30 degrees is 1/2.

Given that sec(θ) = 17/8, which is equivalent to 1/cos(θ) = 17/8.

From this, we can find cos(θ) = 8/17.

Using the identity sin^2(θ) + cos^2(θ) = 1, we can find sin(θ) = sqrt(1 - cos^2(θ)) = sqrt(1 - (8/17)^2) = 15/17.

Finally, using the identity tan(θ) = sin(θ)/cos(θ), we can find tan(θ) = (15/17)/(8/17) = 15/8.

We are given x = 30 degrees, which means we can use the special right triangle with angles 30-60-90 to find the values of sin(x) and cos(x).

In this triangle, the opposite side to the 30 degree angle is 1/2 times the hypotenuse, and the adjacent side to the 30 degree angle is sqrt(3)/2 times the hypotenuse.

So, sin(x) = 1/2 and cos(x) = sqrt(3)/2.

Using the identity sin^2(x) + cos^2(x) = 1, we get:

sin^2(x) + cos^2(x) = (1/2)^2 + (sqrt(3)/2)^2 = 1/4 + 3/4 = 4/4 = 1/2.

For more questions like Triangle click the link below:

https://brainly.com/question/2773823

#SPJ11

The value of the integral is (81/2) for method 1, (95/2) for method 2, and (375/2) for method 3.

We have,

The integral (xz − y³) dV over the region

E = {(x, y, z) : −1 ≤ x ≤ 3, 0 ≤ y ≤ 2, 0 ≤ z ≤ 6}.

Method 1:

Integrating with respect to x first

∫∫∫ (xz − y^3) dV = ∫0⁶ ∫0² ∫−1³ (xz − y³) dx dy dz

= ∫0⁶ ∫0² [(1/2)x²z − xy³]∣−1³ dy dz

= ∫0⁶ [4z − (27/2)z] dz

= (3/2) ∫0⁶ z dz

= (81/2)

Method 2:

Integrating with respect to y first

In this method, we integrate with respect to y first,

∫∫∫ (xz − y₃) dV = ∫0⁶ ∫−1³ ∫0² (xz − y³) dy dx dz

= ∫0⁶ ∫−1³ [(1/2)xz y² − (1/4)y⁴]∣0² dx dz

= ∫0⁶ [(8/3)xz − (81/4)] dz

= (95/2)

Method 3:

Integrating with respect to z first

∫∫∫ (xz − y³) dV = ∫−1³ ∫0² ∫0⁶ (xz − y³) dz dy dx

= ∫−1³ ∫0² [(1/2)xz² − y³z]∣0⁶ dy dx

= ∫−1³ [(54/2)x − (32/3)] dx

= (375/2)

Learn more about integration here:

brainly.com/question/30404807

#SPJ1

The correct answer is C. dV = πr^2 0h dr. This is because the formula for the volume of a right circular cylinder is V = πr^2h. To estimate the change in volume, we take the derivative with respect to r:dV/dr = 2πrh

To estimate the change in volume when the radius changes from r0 to r0 dr, we multiply both sides by dr:

dV = 2πrh0 dr

Since the height does not change, we can substitute h0 for h:

dV = 2πr0h0 dr

Finally, we can use the formula for the volume of a cylinder to substitute πr^2 for h0:

dV = πr^2 0h dr

Therefore, the correct answer is C.

The differential formula that estimates the change in the volume (dV) of a right circular cylinder when the radius changes from r0 to r0 + dr and the height does not change is:

dV = 2πr0h dr

So, the correct answer is B. dV = 2πr0h dr.

Visit here to learn more about Volume of a Cylinder:

brainly.com/question/27033747

#SPJ11

The volume V of the solid is 500π/3 cubic units.

To find the volume V of the solid formed by rotating the region inside the first quadrant enclosed by y=x² and y=5x about the x-axis, we will use the disk method: V = ∫[πh(x)²]dx, where a and b are the limits of integration, and h(x) is the height of the solid at each x-value.

First, find the points of intersection between y=x² and y=5x by setting the two equations equal to each other: x² = 5x. Solve for x: x(x - 5) = 0, which gives x=0 and x=5. These are our limits of integration, a=0 and b=5.

Next, find the height h(x) at each x-value by subtracting the two functions: h(x) = 5x - x².

Now, we can find the volume V by integrating the area of the disks formed at each x-value: V = ∫[π(5x - x²)²]dx from 0 to 5.

V = ∫₀⁵[π(25x² - 10x³ + x⁴)]dx = π[25/3x³ - (5/2)x⁴ + (1/5)x⁵]₀⁵ = π[(125 - 625 + 3125/5) - 0] = π(500/3).

To know more about limits of integration click on below link:

https://brainly.com/question/31314427#

#SPJ11

The curve y = 5 ln(x) has maximum curvature at the point  (2.122, 5 ln(2.122)).

explanation; -

step1:-To find the maximum curvature of the curve y = 5 ln(x), we need to find the second derivative of y with respect to x:

y' = 5/x (first derivative)

y'' = -5/x^2 (second derivative)

step2:-The curvature of the curve at a given point is given by the formula:

k = |y''| / (1 + y'^2)^(3/2)

Substituting y'' and y' from above, we get:

k = |(-5/x^2)| / (1 + (5/x)^2)^(3/2)

  = 5 / (x^2 * (1 + (5/x)^2)^(3/2))

step3:- To find the point where the curvature is maximum, we need to find the value of x that maximizes k. We can do this by taking the derivative of k with respect to x, setting it to zero, and solving for x:

dk/dx = (-10/x^3 * (1 + (5/x)^2)^(3/2)) + (15x/((1 + (5/x)^2)^(5/2))) = 0

Simplifying this expression, we get:

-10/x^3 * (1 + (5/x)^2)^(3/2) = -15x/((1 + (5/x)^2)^(5/2))

Multiplying both sides by (1 + (5/x)^2)^(5/2), we get:

-10(1 + (5/x)^2)^(2) = -15x^4

Simplifying further, we get:

5x^4 - 2x^2 - 25 = 0

This is a quadratic equation in x^2, which we can solve using the quadratic formula:

x^2 = (2 ± sqrt(4 + 500)) / 10

= (1 ± sqrt(126)) / 5

Since x^2 must be positive, we can discard the negative solution, and we get:

x^2 = (1 + sqrt(126)) / 5

Taking the square root of both sides, we get:

x ≈ 2.122

Therefore, the point where the curvature is maximum is approximately (2.122, 5 ln(2.122)).

As x approaches infinity, the curvature approaches zero. This is because as x gets larger, the second derivative of y with respect to x (which is negative) gets smaller and smaller, while the first derivative of y with respect to x (which is positive) gets larger and larger. This means that the curve becomes flatter and flatter as x increases, so its curvature approaches zero.

know more about the maximum curvature of any curve click here;

https://brainly.com/question/8570736

#SPJ11

The probability Pr(X=8) is approximately 0.52 or 52%. Let X be a discrete random variable. We are given the probabilities Pr(X<8) = 1/7 and Pr(X>8) = 1/3.

We need to find Pr(X=8).
We know that the sum of all probabilities for a random variable is equal to 1. So, Pr(X<8) + Pr(X=8) + Pr(X>8) = 1.
Now, we can plug in the given values and solve for Pr(X=8):
1/7 + Pr(X=8) + 1/3 = 1
To solve for Pr(X=8), we first need to find a common denominator for the fractions. The least common multiple (LCM) of 7 and 3 is 21. So, we can rewrite the equation as:
3/21 + Pr(X=8) + 7/21 = 1
Now, combine the fractions:
(3+7)/21 + Pr(X=8) = 1
10/21 + Pr(X=8) = 1
Next, subtract 10/21 from both sides of the equation to isolate Pr(X=8):
Pr(X=8) = 1 - 10/21
Now, find the difference:
Pr(X=8) = (21-10)/21 = 11/21
Finally, convert the fraction to a decimal and round to the nearest hundredth:
Pr(X=8) ≈ 0.52
So, the probability Pr(X=8) is approximately 0.52 or 52%.

Learn more about probability here: brainly.com/question/30034780

#SPJ11

The value of the line integral is (10800i + 7290j)/5.

To evaluate the line integral, we need to parameterize the curve C and then integrate the dot product of F with the tangent vector of C with respect to the parameter.

Let's parameterize C by breaking it into three segments:

We can calculate the tangent vectors for each of these segments:

The tangent vector for the x-axis segment is dr/dt = i.

The tangent vector for the parabola segment is dr/dt = -i - 2tj.

The tangent vector for the y-axis segment is dr/dt = j.

Now we can evaluate the line integral as follows:

∫ F · dr = ∫ F(r(t)) · dr/dt dt

= ∫₀³ (2t(0)⁶)i + (5t²(0)⁵)j · i dt

+ ∫₃⁰ [(2(3-t)(9-t²)⁶)i + (5(3-t)²(9-t²)⁵)j] · (-i - 2tj) dt

+ ∫₉⁰ (2(0)t⁶)i + (5(0)²t⁵)j · j dt

= ∫₀³ 0 dt + ∫₃⁰ (30t³ - 492t² + 2187t - 1872)i + (15t⁴ - 405t³ + 4374t² - 14580t + 13122)j dt + ∫₉⁰ 0 dt

= (∫₃⁰ 30t³ - 492t² + 2187t - 1872 dt)i + (∫₃⁰ 15t⁴ - 405t³ + 4374t² - 14580t + 13122 dt)j

= (10800i + 7290j)/5

Learn more about line integrals here: https://brainly.com/question/28381095

#SPJ1

The given statement "If λ1 and λ2 are distinct eigenvalues of a linear operator T, then Eλ1 ∩ Eλ2 = {0}." is True.

Let v be a nonzero vector in the intersection of the eigenspaces Eλ1 and Eλ2. Then T(v) = λ1v and T(v) = λ2v, where λ1 and λ2 are distinct eigenvalues. This implies that (λ1 - λ2)v = 0.

Since λ1 and λ2 are distinct, it follows that v = 0, contradicting the assumption that v is nonzero. Therefore, the intersection of Eλ1 and Eλ2 is the zero vector {0}.

To learn more about intersection of the eigenspaces, here

https://brainly.com/question/28564799

#SPJ4

Let's use x to represent the number of months that have passed since the changes were made. The equation that can be used to find the number of months, x, after which there will be an average of 320 total attendees each month is:

(10 + x) * (8 + 2x) = 320

This equation represents the total number of attendees for each month, which is the product of the number of workshops and the average number of attendees per workshop. We want to find the value of x that makes the total number of attendees equal to 320.

To check if seven months is a reasonable number of months for this situation, we can substitute x = 7 into the equation and see if it makes sense.

(10 + 7) * (8 + 2(7)) = 17 * 22 = 374

This means that after seven months, the total number of attendees would be 374, which is higher than the target of 320. Therefore, seven months is not a reasonable number of months for this situation as it exceeds the expected value of total attendees. We would need to solve the equation to find the exact number of months it would take to reach an average of 320 total attendees per month.

Learn more about workshops ,

https://brainly.com/question/31026752

#SPJ4

The measure of length of a 12.83.

The value of angle B is 71 and angle C is 55.

The measure of length of a is calculated by applying cosine rule as shown below.

a² = 13² + 15² - 2(13 x 15) cos54

a² = 164.8

a = √ (164.8)

a = 12.83

The value of angle B is calculated as follows;

sin B/15 = sin 54/12.83

sin B = 15 x ( sin 54/12.83)

sin B = 0.9458

B = sin⁻¹ (0.9458)

B = 71⁰

The value of angle C is calculated as follows;

A + B + C = 180

54 + 71 + C = 180

C = 180 - 125

C = 55⁰

Learn more about angles of triangle here: https://brainly.com/question/25215131

#SPJ1

The first four terms in the power series expansion of f(x) = e^(2x) about x = 0 are 1, 2x, 2x^2, and (4/3)x^3

The first four terms in the power series expansion of the function f(x) = e^2x about x = 0 are:
f(x) = e^2x = 1 + 2x + 2x^2 + (4/3)x^3 + ...

This can be obtained by using the formula for the Taylor series expansion of e^x:
e^x = 1 + x + (x^2/2!) + (x^3/3!) + ...

and replacing x with 2x to get:
e^(2x) = 1 + 2x + (4x^2/2!) + (8x^3/3!) + ...

Simplifying the coefficients of the terms gives:
f(x) = e^(2x) = 1 + 2x + 2x^2 + (4/3)x^3 + ...

Therefore, the first four terms in the power series expansion of f(x) = e^(2x) about x = 0 are 1, 2x, 2x^2, and (4/3)x^3.

For more such questions on Power Series, visit:

brainly.com/question/31318960

#SPJ11

The coordinates of the reflected points are A' = (3, 3), B' = (4, 0) and C' = (1, 1).

Given that, a triangle ABC is reflected by x = -3, and then translated by the directed segment,

Firstly, the reflection of the points,

A = (-5, 2)

B = (-6, -1)

C = (-3, 0)

After reflection =

A' = (-1, 2)

B' = (0, -1)

C' = (-3, 0)

After translation =

A' = (3, 3)

B' = (4, 0)

C' = (1, 1).

Hence, the coordinates of the reflected points are A' = (3, 3), B' = (4, 0) and C' = (1, 1).

Learn more about transformation, click;

https://brainly.com/question/13801312

#SPJ1

By the comparison test, the integral also converges.

∫(1 to ∞) dx/√[tex](x^9 + sin^8(x) + 2015)[/tex] converges.

To determine whether the integral converges or diverges, we can use the substitution x = 4sin(t), dx = 4cos(t)dt:

∫(0 to 4) 1/(16 - [tex]x^2[/tex]) dx = ∫(0 to π/2) 1/(16 - 16[tex]sin^2(t))[/tex] * 4cos(t) dt

= ∫(0 to π/2) 1/(4[tex]cos^2(t))[/tex]* 4cos(t) dt

= ∫(0 to π/2) sec(t) dt

= ln|sec(t) + tan(t)| from 0 to π/2

= ln(sec(π/2) + tan(π/2)) - ln(sec(0) + tan(0))

= ln(∞) - ln(1) = ∞

Since the integral diverges, it does not converge.

To determine whether the integral converges or diverges, we can use the comparison test:

[tex]x^9 + sin^8(x)[/tex]≤ [tex]x^9 + 1[/tex]

√[tex](x^9 + sin^8(x) + 2015)[/tex] ≤ √[tex](x^9 + 1 + 2015) = (x^9 + 2016)[/tex]

Since 1/√[tex](x^9 + 2016)[/tex] is a p-series with p = 9/2 > 1, it converges. Therefore, by the comparison test, the integral also converges.

∫(1 to ∞) dx/√[tex](x^9 + sin^8(x) + 2015)[/tex] converges.

Learn more about integral converge,

https://brainly.com/question/29558996

#SPJ4

By the comparison test, the integral also converges.

∫(1 to ∞) dx/√[tex](x^9 + sin^8(x) + 2015)[/tex] converges.

To determine whether the integral converges or diverges, we can use the substitution x = 4sin(t), dx = 4cos(t)dt:

∫(0 to 4) 1/(16 - [tex]x^2[/tex]) dx = ∫(0 to π/2) 1/(16 - 16[tex]sin^2(t))[/tex] * 4cos(t) dt

= ∫(0 to π/2) 1/(4[tex]cos^2(t))[/tex]* 4cos(t) dt

= ∫(0 to π/2) sec(t) dt

= ln|sec(t) + tan(t)| from 0 to π/2

= ln(sec(π/2) + tan(π/2)) - ln(sec(0) + tan(0))

= ln(∞) - ln(1) = ∞

Since the integral diverges, it does not converge.

To determine whether the integral converges or diverges, we can use the comparison test:

[tex]x^9 + sin^8(x)[/tex]≤ [tex]x^9 + 1[/tex]

√[tex](x^9 + sin^8(x) + 2015)[/tex] ≤ √[tex](x^9 + 1 + 2015) = (x^9 + 2016)[/tex]

Since 1/√[tex](x^9 + 2016)[/tex] is a p-series with p = 9/2 > 1, it converges. Therefore, by the comparison test, the integral also converges.

∫(1 to ∞) dx/√[tex](x^9 + sin^8(x) + 2015)[/tex] converges.

Learn more about integral converge,

https://brainly.com/question/29558996

#SPJ4

Answer:

A. 5, 7, 9

Step-by-step explanation:

in a regular triangle the sum of any 2 sides must always be greater than the third side.

A.

5+7 = 12 > 9

5+9 = 14 > 7

9+7 = 16 > 5

yes, this can be a triangle.

B.

1+8 = 9 = 9

that violates the condition. both sides together are equally long as the third side, so the triangle would be only a flat line with the top vertex being squeezed flat onto the baseline.

no triangle.

C.

5+5 = 10 < 12

that violates the condition. the sides cannot even connect all around.

no triangle.

The statement that, an equation be represented by an unbalanced scale is True.

When an object's weight differs between either side of a scale, it depicts an equation. Correspondingly, one side denotes one part of the equation, while the other side represents another portion.

Consider this instance with 2x + 4 = 10: To illustrate, lay two weights upon the left scale and in confederation let there be a sole mass valued at six units on the right side. Through employing such an unbalanced scale composited with the given equation, students can comprehend vital components revolving around balancing equations. All concepts are easily identifiable with its visual nature, which incredibly strengthens their acquiring experience.

Find out more on unbalanced scales at https://brainly.com/question/1443731

#SPJ1

The correct choice is: B. There are infinitely many solutions. The solution is X1 = 85t and X2 = t, for any real number t.

To determine the solution of the system, we need to convert the given augmented matrix to row echelon form and then to reduced row echelon form.

Starting with the given matrix:

[ 1 -4 170 0 0 ]

Divide the first row by 1:

[ 1 -4 170 0 0 ]

Add the first row to the second row four times over:

[ 1 -4 170 0 0 ]

[ 0 -16 680 0 0 ]

Subtract 170 times the first row from the third row:

[ 1 -4 170 0 0 ]

[ 0 -16 680 0 0 ]

[ 0 676 -28900 0 0 ]

Divide the second row by -16:

[ 1 -4 170 0 0 ]

[ 0 1 -85 0 0 ]

[ 0 676 -28900 0 0 ]

Subtract -676 times the second row from the third row:

[ 1 -4 170 0 0 ]

[ 0 1 -85 0 0 ]

[ 0 0 -39180 0 0 ]

Divide the third row by -39180:

[ 1 -4 170 0 0 ]

[ 0 1 -85 0 0 ]

[ 0 0 1 0 0 ]

Now the matrix is in reduced row echelon form, and we can see that the third equation is X2 = 0, which means that X2 can take any value. The second equation is X1 - 85X2 = 0, which means that X1 = 85X2. Therefore, the solution to the system is X1 = 85X2 and X2 can take any value.

Thus, the correct choice is:

B. There are infinitely many solutions. The solution is X1 = 85t and X2 = t, for any real number t.

To learn more about  infinitely visit: https://brainly.com/question/29963265

#SPJ11

We can prove by induction that n! < n^n for all positive integers n ≥ 2

We can use mathematical induction to prove that n! < n^n for all positive integers n ≥ 2.

Base case:

For n = 2, we have 2! = 2 and 2^2 = 4. Since 2 < 4, the base case is true.

Inductive step:

Assume that n! < n^n for some positive integer n ≥ 2. We will show that (n+1)! < (n+1)^(n+1).

Starting with the left-hand side:

(n+1)! = (n+1) * n!

< (n+1) * n^n (by the inductive hypothesis)

< (n+1) * (n+1)^n (since n < n+1)

= (n+1)^(n+1)

proved that n! < n^n for all positive integers n ≥ 2 by mathematical induction

Therefore, (n+1)! < (n+1)^(n+1).

Since the base case is true and the inductive step holds, we have proved that n! < n^n for all positive integers n ≥ 2 by mathematical induction.

Learn more about induction

brainly.com/question/18575018

SPJ11

The probability of a randomly selected bill being at least $39.10 is approximately option (d) 0.0344

To solve this problem, we need to standardize the given value using the standard normal distribution formula

z = (x - mu) / sigma

where:

x = $39.10 (the given value)

mu = $30 (the mean)

sigma = $5 (the standard deviation)

z = (39.10 - 30) / 5

z = 1.82

Now, we need to find the probability of a randomly selected bill being at least $39.10, which is equivalent to finding the area under the standard normal distribution curve to the right of z = 1.82.

Using a standard normal distribution table or calculator, we can find that the probability of a randomly selected bill being at least $39.10 is approximately 0.0344.

Therefore, the correct option is (d) 0.0344.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

To calculate the adjusted R-squared, you need to use the formula: 1 - [(1 - R2) * (n - 1) / (n - k - 1)] where n is the sample size and k is the number of independent variables in the regression model.

In this case, k is equal to 2 (exper and exper2). Therefore, the adjusted R-squared can be calculated as 1 - [(1 - 0.011) * (30 - 1) / (30 - 2 - 1)] = 0.000.

False. The R2 value is a measure of how much variation in the dependent variable can be explained by the independent variables in the model.

Adding an independent variable with a t statistic less than one would mean that the variable is not statistically significant and does not have a significant impact on the dependent variable.

Therefore, the R2 value should not decrease as a result. In fact, adding a significant independent variable can increase the R2 value, indicating a better fit of the model to the data.

To know more about regression model click on below link:

https://brainly.com/question/14983410#

#SPJ11

One might choose to use a box and whisker plot instead of a bar graph because A box and whisker plot shows more information than a bar graph.

Box plot, which is also known as box and whisker plot, is a method of graphically representing the measures like minimum, maximum and the quartiles of the data set.

Bar graphs, on the other hand does not show all the information as box plot do.

They might not show quartiles of the set.

So box plot shows more information than a bar graph.

Hence the correct option is C. A box and whisker plot shows more information than a bar graph.

Learn more about Box and Whisker plot here :

https://brainly.com/question/3209282

#SPJ1

The required answer is p(x1 > 6 > 2x2) = 15/2.

To find p(2 < x1 < 2x2 < 5), we need to first determine the range of possible values for x1 and x2 that satisfy the inequality. We can do this by setting up a system of inequalities:

2 < x1
2x1 < 2x2
2x2 < 5

Simplifying the second inequality, we get:

x1 < x2

Combining all the inequalities, we have:

2 < x1 < x2 < 5/2

This means that x1 can take on values between 2 and 5/2, while x2 can take on values between x1 and 5/2. To find p(2 < x1 < 2x2 < 5), we need to calculate the probability of this event occurring, given that x1 and x2 are both uniformly distributed between 0 and 1. This can be done using a double integral:
p(2 < x1 < 2x2 < 5) = ∫∫(2 < x1 < x2 < 5/2) dx1 dx2
= ∫2^(1/2) 2x2 (5/2 - x2) dx2
= 15/8 - 2^(1/2)/2

To find p(x1 > 6 > 2x2), we need to determine the range of possible values for x1 and x2 that satisfy the inequality. We can do this by setting up the following inequalities:

x1 > 6
2x2 < x1

Combining these inequalities, we have:

2x2 < x1 > 6

This means that x1 can take on values greater than 6, while x2 can take on values between 0 and x1/2. To find p(x1 > 6 > 2x2), we need to calculate the probability of this event occurring, given that x1 and x2 are both uniformly distributed between 0 and 1. This can be done using a double integral:
The probability of an event is a number that indicates how likely the event is to occur. It is expressed as a number in the range from 0 and 1, or, using percentage notation, in the range from 0% to 100%. The more likely it is that the event will occur, the higher its probability.

p(x1 > 6 > 2x2) = ∫∫(x1 > 6, 0 < x2 < x1/2) dx1 dx2

= ∫6^1 2x2 dx2

= 15/2

Therefore, p(x1 > 6 > 2x2) = 15/2.

find p for the given inequalities.

step-by-step.

First inequality: 2 < x1 < 2x2 < 5
1. Rearrange the inequality to isolate x1: 2 < x1 < 2x2
2. Rearrange the inequality to isolate x2: x1/2 < x2 < 5/2

The probability of this event occurring, given that x1 and x2 are both uniformly distributed between 0 and 1. This can be done using a double integral .The probability of an event is a number that indicates how likely the event is to occur. It is expressed as a number in the range from 0 and 1, or, using percentage notation, in the range from 0% to 100%. The more likely it is that the event will occur, the higher its probability.

The probability of getting an outcome of "head-head" is 1 out of 4 outcomes, or, in numerical terms, 1/4, 0.25 or 25%. However, when it comes to practical application, there are two major competing categories of probability interpretations, whose adherents hold different views about the fundamental nature of probability.

Second inequality: x1 + 6 > 2x2
1. Rearrange the inequality to isolate x1: x1 > 2x2 - 6
2. Rearrange the inequality to isolate x2: x2 < (x1 + 6) / 2

Now we have the following inequalities:
1. 2 < x1 < 2x2
2. x1/2 < x2 < 5/2
3. x1 > 2x2 - 6
4. x2 < (x1 + 6) / 2

To find p, we need to find the range of x1 and x2 that satisfy all the given inequalities. Unfortunately, without more information or constraints on x1 and x2, we cannot find a unique solution for p.

To know more about probability. Click on the link.

https://brainly.com/question/14210034

#SPJ11

The area of the shape is

24.4 square units

Perimeter of the shape = 18.09 units

The area is calculated by dividing the figure into simpler shapes.

The simple shapes used here include

Area of shape

= area of square + area of the 2 sectors

= length x width + 2 * x/360 * πr^2

= 4 x 4 + 2 * 30/360 * π * 4^2

= 24.3775 square units

Perimeter of the shape

= 2 * length + 2 * radius + length of arc

= 2 * 4 + 2 * 4 + 30/360 * 2π * 4

= 18.09 units

Learn more about composite shapes at

https://brainly.com/question/8370446

#SPJ1