Find the surface area of this triangular prism. Be sure to include the correct unit in your answer.

Answer:

9x + 13x = 176

22x = 176

x = 8

So the numbers are 9 × 8 = 72 and

13 × 8 = 104.

The area of ACD based on the information given will be 54 units².

The area of a trapezoid is calculated as follows:

(base1 + base2) height / 2 = Area

where base1 and base2 are the lengths of the trapezoid's two parallel sides, and height is the perpendicular distance between them.

So, assuming you have the measurements for base1, base2, and height, you can use the formula above to compute the area of the trapezoid.

Area = 1/2 × (10 + 8) × 6

Area = 1/2 × 18 × 6

Area = 54 units ²

Learn more about area on

https://brainly.com/question/25292087

#SPJ1

The most common amount of sleep is 8 1/2 hours.

There is no outlier in the data.

The difference in hours between the longest night's sleep and the longest night's sleep is 3.5 hours.

The number of people who slept longer than 8 hours is 15 people.

In Mathematics and Statistics, a dot plot can be defined as a type of line plot that is typically used for the graphical representation of a data set above a number line, especially through the use of crosses or dots.

Based on the information provided about the number of hours Molly's friends slept last night, we can reasonably infer and logically deduce that all of the data points would be between 6 and 11, without any outlier.

In this scenario, we would use an online graphing calculator to construct a dot plot with respect to a number line that accurately fit Molly's data set, with a scale of 0 < x < 11.

Difference in hours = 10 - 6.5 = 3.5 hours.

In conclusion, the dot plot would be titled "Hours of sleep."

Read more on dot plots here: brainly.com/question/30486649

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

Okay, let's analyze the linearized data options to determine which equation best models it:

a. log y = 0.116315x+0.249114

This has a positive slope coefficient of 0.116315, so it will model increasing data. But the y-intercept term 0.249114 is negative, so the model line would start below the origin. This does not seem to match the typical linear relationship we would expect.

b. log y = 0.249114x+0.116315

This also has a positive slope coefficient, but now the y-intercept term 0.116315 is positive. This could potentially model increasing data that starts above the origin. However, without seeing the data it's hard to definitively say if this is the best fit.

c. log y = 0.0288761x+0.435269

This has a positive but much smaller slope coefficient of 0.0288761. This would model increasing data at a much shallower rate. Again, without seeing the data we can't rule this out, but it seems less likely.

d. log y = 0.435269x+0.0288761

This has a larger positive slope coefficient of 0.435269, so it would model increasing data at a steeper rate. And the positive y-intercept term of 0.0288761 ensures the model line starts above the origin.

Of these 4 options, choice d (log y = 0.435269x+0.0288761) seems the most likely to best model increasing linear data that starts above the origin. However, without seeing the actual data points, we can't say that with certainty. The slope and intercept values would need to give the closest fit to the data for that to be the definitive choice.

Let me know if this helps explain the options, or if you have any other questions!

Answer:

(-1, 2)

Step-by-step explanation:

When an equation is formatted like this, you can just reverse the operators (in this case +1 and -2) and you'll get your coordinates.

Answer:

9

Step-by-step explanation:

All you have to do is replace the letters with numbers

= ( x - y) + z

= ( 4 - 5) +  10

= -1 + 10

= 10 - 1

= 9

Answer:

the answer is E

Step-by-step explanation:

This means that the coordinates of P are (a, b), where a is the value for which f'(a) = 0, and b = f(a).

The term "coordinate" generally refers to a value or set of values that describe the position or location of a point or object in a particular system or space. In mathematics, coordinates are typically used to describe the position of a point on a graph or in a geometric plane, and they usually consist of a set of numerical values that indicate the distance or direction of the point from a specified origin or reference point. In geographic or cartographic contexts, coordinates might refer to latitude and longitude values that indicate a specific location on the Earth's surface. Other systems may use different types of coordinates, but the underlying idea is usually the same: a set of values that describe the position of an object or point in a given space or system.

if the graph of f has a horizontal tangent at point P, this means that the slope of the tangent line at P is zero.

Let (a, b) be the coordinates of P. Then the equation of the tangent line at P is:

[tex]y - b = f'(a)(x - a)[/tex]

Since the slope of the tangent line at P is zero, we have:

f'(a) = 0

This means that the derivative of f at x = a is zero. So, we need to find the value of a for which f'(a) = 0.

Once we find the value of a, we can substitute it into the equation of the tangent line to find the value of b.

So, let's find f'(x) first:

f(x) = ... (the function is not given, so we cannot find f'(x) explicitly)

We know that f'(a) = 0, so we have:

[tex]f'(a) = lim h- > 0 [f(a+h) - f(a)]/h = 0[/tex]

This means that:

[tex]lim h- > 0 [f(a+h) - f(a)]/h = 0[/tex]

Multiplying both sides by h, we get:

[tex]lim h- > 0 [f(a+h) - f(a)] = 0[/tex]

Taking the limit as h approaches 0, we get:

[tex]f(a) - f(a) = 0[/tex]

So, we have:

[tex]f(a) = b[/tex]

To know more about tangent line, visit:

https://brainly.com/question/31326507

#SPJ1

The maximum price you should be willing to pay for the annuity, given the cash flow and the interest rates, would be 2. R 39, 272

The maximum price to be paid for the annuity would be the present value of the annuity which can be found by the formula :

= Annuity x Present value interest factor of annuity, 20 years, 8 %

The annuity = R 4, 000

Present value interest factor of annuity, 20 years, 8 %  = 9. 81815

The maximum you should pay for the annuity is therefore:

= 4, 000 x 9. 81815

=  R 39, 272 . 60

= R 39, 272

Find out more on maximum price at https://brainly.com/question/14473676

#SPJ1

Answer:

Yes, you did solve it correctly, and the way you did it is fine

Step-by-step explanation:

You correctly applied the formula for the Law of Cosines to solve for the unknown side length c of a triangle, given the values of the other two side lengths and the angle opposite the unknown side. Specifically, you plugged in the given values of a, b, and C into the formula c^2 = a^2 + b^2 - 2ab cos(C) and then solved for c by taking the square root of both sides of the equation. Finally, you simplified the expression for c by calculating the square root of 25 to obtain a numerical value of c=5

POWERED BY CGPT

The factored form of        [tex]8x^{2} 4 - 27y^{6}[/tex] 8x²4 - 27y⁶

To factor this expression, that it is in the form of a difference of two squares.

Specifically, 8x²4 is equal to (2x²)³ and 27y⁶ is equal to (3y²)³.

the formula for the difference between two cubes, states that:

              [tex]a^3 - b^3 = (a - b)(a^2 + ab + b^2)[/tex]  (a³ - b³ = (a - b)(a² + ab + b²)

Substituting [tex]a = 2x^2[/tex] a = 2x² and [tex]b = 3y^2[/tex] b = 3y², gives

[tex]8x^24 - 27y^6 = (2x^2)^3 - (3y^2)^3= (2x^2 - 3y^2)(4x^2 + 6x^2y^2 + 9y^4)[/tex]

8x²4 - 27y⁶ = (2x²)³ - (3y²)³ = (2x² - 3y²)(4x⁴ + 6x²y² + 9y⁴)

Therefore, the factored form of [tex]8x^{2} 4 - 27y^{6}[/tex] 8x²4 - 27y⁶ is [tex](2x^2 - 3y^2)(4x^4 + 6x^2y^2 + 9y^4).[/tex](2x² - 3y²)(4x⁴ + 6x²y² + 9y⁴).

To learn more about Factored form:

https://brainly.com/question/29065045?referrer=searchResults

Where the above information about right triangles are given, the asnswer is

A. x = 3, y = 2 (Option A)

The hypotenuse and the length of one leg of one right triangle must be equal to the hypotenuse and corresponding length of the one leg of the other ∆ for both triangles to be equal by the HL Congruence Theorem.

Thus, let's find x and y by setting the corresponding lengths of the two right ∆s equal to each other.

Therefore:

x = y + 1 ----› eqn. 1

2x + 3 = 3y + 3 ----› eqn. 2

Substitute x = (y + 1) into eqn. 2, and solve for y.

2x + 3 = 3y + 3 ----› eqn. 2

2(y + 1) + 3 = 3y + 3

2y + 2 + 3 = 3y + 3

2y + 5 = 3y + 3

Collect like terms

2y - 3y = -5 + 3

-y = -2

Divide both sides by -1

y = 2

Substitute y = 2 into eqn. 1.

x = y + 1 ----› eqn. 1

x = 2 + 1

x = 3

Thus,

x = 3, and y = 2 (Option A)

Learn more about right triangles:
https://brainly.com/question/6322314
SPJ1

Full Question:

See attached image

Answer: To find the area of the ring-shaped path, we need to subtract the area of the inner circle (the pool) from the area of the outer circle. The radius of the pool is half the diameter, so it is 11 yards. The radius of the outer circle is the sum of the radius of the pool and the width of the path, so it is 11 + 5 = 16 yards.

The area of the pool is:

A_pool = pi * r^2 = pi * 11^2 ≈ 380.13 square yards

The area of the outer circle is:

A_outer = pi * R^2 = pi * 16^2 ≈ 804.25 square yards

The area of the ring-shaped path is:

A_path = A_outer - A_pool ≈ 804.25 - 380.13 ≈ 424.12 square yards

Since one gallon of coating can cover 5 square yards, we need:

Gallons = A_path / 5 ≈ 424.12 / 5 ≈ 84.82

Therefore, we need approximately 85 gallons of coating to cover the ring-shaped path.

Step-by-step explanation:

Step-by-step explanation:

(3h - 5)(5h + 4) =   3h * 5h    +   3h * 4     - 5*5h    - 5 *4

                              =    15h^2        - 13h    -20

[tex](3h-5)(5h+4)[/tex]

[tex]=(3h+-5)(5h+4)[/tex]

[tex]=(3h)(5h)+(3h)(4)+(-5)(5h)+(-5)(4)[/tex]

[tex]=15h^2+12h-25h-20[/tex]

Answer:

The equation of line L is given as follows:

L: x = 2.

The equation of line L is the line of symmetry of the quadratic function given as follows:

y = 3x² - 12x + 7.

Considering a quadratic function with equation y = ax² + bc + c, the line of symmetry is defined as follows:

L: x = -b/2a.

The coefficients of the function are given as follows:

a = 3, b = -12.

Hence the equation of line L is defined as follows:

L: x = -(-12)/2(3)

L: x = 2.

More can be learned about quadratic functions at https://brainly.com/question/1214333

#SPJ1

Answer:

If I am not mistaken a=3;b=10;c=23;d=39

Step-by-step explanation:

Along with proof of (a.) and (d.), (b.) Power tower: one level is a, (k + 1) levels is a raised to the power of a power tower with k levels, (c.) A(2, n) <= 2 ↑↑ n for all positive integers n, where ↑↑ denotes power tower notation.

The idea of a fully computable function that is not primitive recursive is illustrated by the recursively constructed mathematical function known as the Ackermann function. Since m and n are non-negative integers, it is commonly written as A(m, n).

a.) Prove using regular induction that [tex]A(1, n) \leq 2^n[/tex] for all positive integers n:

Base Case: For n = 1, A(1, 1) = 2, which is equal to [tex]2^1[/tex].

Inductive Hypothesis: Assume that [tex]A(1, k) \leq 2^k[/tex] for some positive integer k.

Inductive Step: We need to show that [tex]A(1, k + 1) \leq 2^{(k + 1)}[/tex]. Using the recursive definition of A(m, n), we have [tex]A(1, k + 1) = A(0, A(1, k)) = 2^{(A(1, k))}\leq 2^{(2^k)}[/tex] (by inductive hypothesis)[tex]< = 2^{(2^{(k + 1)})}[/tex].

Therefore, by regular induction, we have proved that [tex]A(1, n) \leq 2^n[/tex] for all positive integers n.

b.) A power tower with one level is defined as a, and a power tower with (k + 1) levels is defined as a raised to the power of a power tower with k levels.

c.) [tex]A(2, n) \leq 2[/tex] ↑↑ n for all positive integers n, where ↑↑ denotes power tower notation.

d.) The recursive definition of a triple arrow-up notation for power towers is:

a ↑↑↑ 1 = a (base case)

a ↑↑↑ (k + 1) = a ↑↑ (a ↑↑↑ k) (recursive step)

This definition states that a triple arrow-up notation with one level is equal to the base value "a", and a triple arrow-up notation with (k + 1) levels is equal to "a" raised to the power of a triple arrow-up notation with "k" levels.

Learn more about Ackermann function here:

https://brainly.com/question/14868559

#SPJ1

Complete Question: ( Refer to image)

Therefore, after 8 years, the interest will be $20,146.60.

When a customer pays interest to borrow money from a bank, for example, interest is referred to as a payment from the borrower in the finance industry.

The customer would pay an amount that is greater than the amount they borrowed due to interest.

The principal is the sum of money that was first invested or lent and upon which interest is based.

We refer to the process of calculating fresh interest based on the new principal (which is the old principal plus interest) at the conclusion of the subsequent payment period as compound interest when we add interest to interest.

So, compound interest is interest that is paid on both the principal and interest that has already been generated.

We may calculate compound interest using the following straightforward formula:

That has to be clarified in order for us to address the issue at hand:

17400 invested at a 2.5% annual compounded rate for an 8-year period.

Let's take a look at what is provided and note it down.

Therefore, the principal is $43,000.00. In addition, we know that our rate is 2.5%, or 0.025

If it is annually compounded, n=1 times every year.

Additionally, t=8 years.

A = 17400(1 + 0.025/1)⁸ A = $20,146.60

Therefore, after 8 years, the balance will be $20,146.60.

To know more about interest visit:

brainly.com/question/29222674

#SPJ1

Therefore, after 8 years, the interest will be $20,146.60.

When a customer pays interest to borrow money from a bank, for example, interest is referred to as a payment from the borrower in the finance industry.

The customer would pay an amount that is greater than the amount they borrowed due to interest.

The principal is the sum of money that was first invested or lent and upon which interest is based.

We refer to the process of calculating fresh interest based on the new principal (which is the old principal plus interest) at the conclusion of the subsequent payment period as compound interest when we add interest to interest.

So, compound interest is interest that is paid on both the principal and interest that has already been generated.

We may calculate compound interest using the following straightforward formula:

That has to be clarified in order for us to address the issue at hand:

17400 invested at a 2.5% annual compounded rate for an 8-year period.

Let's take a look at what is provided and note it down.

Therefore, the principal is $43,000.00. In addition, we know that our rate is 2.5%, or 0.025

If it is annually compounded, n=1 times every year.

Additionally, t=8 years.

A = 17400(1 + 0.025/1)⁸ A = $20,146.60

Therefore, after 8 years, the balance will be $20,146.60.

To know more about interest visit:

brainly.com/question/29222674

#SPJ1

Elsa has a 5:7 an odd of getting an extra-large stuffed animal against her.

Elsa has a 7:5 chance in her favor of getting an extra-large stuffed animal.

(a) The total number of balloons is 1 + 2 + 2 + 7 = 12. The number of balloons that are not extra-large is 1 + 2 + 2 = 5. So the odds against Elsa winning an extra-large stuffed animal are 5:7.

(b) The odds in favor of Elsa winning an extra-large stuffed animal are the opposite of the odds against winning an extra-large stuffed animal. So the odds in favor of Elsa winning an extra-large stuffed animal are 7:5.

Find out more on odds here: https://brainly.com/question/14350753

#SPJ1

The distance, 27 ft 10  in, is equivalent to 8.48 meters.

1. Convert 27 ft first to inches by multiplying it by a conversion factor.

2. Add the converted value to 10 inches.

3. Convert the inch measure by multiplying it by a conversion factor.

4. Round to the nearest hundredth.

Convert the factor 12 inch/ 1 ft.

since 1 foot is equivalent to 12 inches.

= 27 ft × [tex]\frac{12inch}{1ft}[/tex] + 10 inch = 324 inch + 10 inch = 334 inch

This means that 27 ft 10 in is equivalent to 47/2 inches.

Again, The conversion factor 0.0254 m/ 1 inch

since there are 0.0254 meters in an inch.

[tex]334 inches[/tex] × [tex]\frac{0.00254 meters}{1 inch}[/tex]

= 334  × 0.00254 meters

= 8.4836 meters

Thus, distance, 25 ft and 20 inches, is equivalent to approximately 8.48 meters.

Learn more about Conversion factor at:

https://brainly.com/question/30166433

#SPJ1

Front-end rounding 10,355 to the nearest ten is 10,360.

Rounding is the process of approximating a number to a specified degree of accuracy or precision. Rounding is useful when we want to simplify numbers or express them in a more manageable or meaningful way. There are various methods of rounding, such as rounding up, rounding down, and rounding to the nearest value.

To round a number to a specified degree of accuracy, we first identify the place value we are rounding to, such as units, tens, hundreds, etc. We then look at the digit in that place value and the digit to the right of it. If the digit to the right is 5 or greater, we round up by adding 1 to the digit in the place value we are rounding, and then replace all the digits to the right with zeros. If the digit to the right is less than 5, we round down by simply dropping all the digits to the right.

To front-end round a number, you look at the digit in the place value you are rounding to and round up or down based on the digit to the right of that place value.

To front-end round 10,355 to the nearest ten, we look at the tens place, which is the second digit from the right. The digit in the tens place is 5, which is greater than or equal to 5, so we round up.

To round up, we add 1 to the digit in the tens place and replace all the digits to the right with zeros. So, rounding up 10,355 to the nearest ten gives us:

10,360

Therefore, front-end rounding 10,355 to the nearest ten is 10,360.

To know more about digit visit:

https://brainly.com/question/14588148

#SPJ1

The probabilities will be :

P(none) = 0.018

P(at least one) =  0.982

P(at most one) = 0.187

Pretty Betty share  is 15%, the probability that any one household is tuned to the show will be:  0.15.

To find the probability that none of the households are tuned to Pretty Betty will be:

P(none) = 0.85¹¹

            ≈ 0.018

So, to find the probability that at least one household is tuned to Pretty Betty,  i use the complement rule as well as subtract the probability of none of the households being tuned to the show from 1:

P(at least one)

= 1 - P(none)

≈ 1 - 0.018

≈ 0.982

So, to find the probability that at most one household is tuned to Pretty Betty:

P(at most one) = P(none) + P(one)

= 0.85^11 + 11(0.15)(0.85^10)

≈ 0.187

Hence, the probabilities will be :

P(none) = 0.018

P(at least one) =  0.982

P(at most one) = 0.187

Learn more about probabilities  from

https://brainly.com/question/13604758

#SPJ1

The approximate z-score that corresponds to a right tail area of 1.50 is 0.066807

From the question, we have the following parameters that can be used in our computation:

P(Z > 1.5)

This means that we calculate the z-score right tail area of 1.50

This is represented as

Probability = (z > 1.50)

Using a graphing calculator, we have

Probability =  0.066807

Hence, the probability value is 0.066807

Read mroe about z-scores at

brainly.com/question/25638875

#SPJ1

The solution to the equations for y are y = 9, y = 8 and y = 7

From the question, we have the following parameters that can be used in our computation:

y²- 1 = 80

(y - 4)÷ 4 = 1

10 - 63 ÷ y = 1​

Solving the equations, we have

y²- 1 = 80

y² = 81

y = 9

Next, we have

(y - 4)÷ 4 = 1

(y - 4) = 4

y = 8

Lastly, we have

10 - 63 ÷ y = 1​

-63 ÷ y = -9

-9y = -63

y = 7

Read more about equations at

https://brainly.com/question/148035

#SPJ1

Answer:

y = [tex]\sqrt{11}[/tex]

Step-by-step explanation:

Substitute -4 for x and solve for y

[tex]y^{2}[/tex] = -2x + 3

[tex]y^{2}[/tex] = -2(-4) + 3

[tex]y^{2}[/tex] = 8 + 3

[tex]y^{2}[/tex] = 11

[tex]\sqrt{y^{2} }[/tex] = [tex]\sqrt{11}[/tex]

y = [tex]\sqrt{11}[/tex]

Helping in the name of Jesus.

For an isosceles triangle, a leg is congruent to the other leg. A leg is not necessarily congruent to the base. The correct solution found by solving the equation 2x = 3x - 5 is x = 5. The length of the top left side is 10, and the length of the bottom left side is 10.

In Mathematics and Geometry, an isosceles triangle simply refers to a type of triangle with two (2) sides that are equal in length and two (2) equal angles.

This ultimately implies that, an isosceles triangle comprises two (2) side lengths that are equal and two (2) angles with the same magnitude.

In this isosceles triangle, we have the following equation;

2x = 3x - 5 (two (2) side lengths are congruent).

3x - 2x = 5

x = 5 units.

For the bottom left side, we have;

3x - 5 = 3(5) - 5 = 15 - 5 = 10 units.

Read more on isosceles triangle here: brainly.com/question/19238666

#SPJ1

Any point that includes the origin that comes in the shaded region will satisfy the system of equation.

For the points that satisfy the system of inequalities y < x² + 3 and y > x² - 4, we need to graph the two parabolas y = x² + 3 and y = x² - 4 and shade the region where the two graphs overlap.

The graph of y = x² + 3 is an upward-facing parabola that intersects the y-axis at (0, 3). The graph of y = x² - 4 is also an upward-facing parabola that intersects the y-axis at (0, -4).

We can see from the graphs that the region where y < x² + 3 and y > x² - 4 is the shaded region between the two parabolas. This region is bounded by the two lines y = x² + 3 and y = x² - 4.

To find a point that satisfies this system of inequalities, we can pick any point within this shaded region. For example, the point (0, 0) lies within the shaded region and satisfies both inequalities:

[tex]y = 0 < x^2+ 3 = 3\\y = 0 > x^2 - 4 = -4[/tex]

Therefore, the point (0, 0) is a solution to the system of inequalities.

Learn more about the System of equations here:

https://brainly.com/question/12628931

#SPJ1