for n2 at 298 k, what fraction of molecules has a speed between 200 and 300 m/s?

Answer:

False

Explanation:

Beta particles are electrons...which do not affect the atomic number...losing a beta particle will not change the atomic number.

  The atomic number is determined by the number of PROTONS in the matter.

( ALPHA particles will change the atomic number as they have protons in them)

To calculate the RMS current, Divide the RMS voltage by the impedance.

What is RMS value?

In science and its applications, the root mean square of a bunch of numbers is characterized as the square foundation of the mean square (math mean of squares) of that set. RMS, likewise called root mean square, is a unique instance of summed up mean. The RMS worth of a constantly shifting capability can be characterized as the fundamental of the square of the momentary worth north of one cycle.

For AC current, RMS rises to the worth of steady DC current that delivers a similar power utilization with a resistive burden. In assessment hypothesis, the root mean square mistake of an assessor is a proportion of the blemish of the assessor's fit to the information.

Therefore, To calculate the RMS current, Divide the RMS voltage by the impedance.

To know more about RMS value, visit:

brainly.com/question/9623597

#SPJ4

To get a saturated solution, we must dissolve 200 divide by 100 multiply by 20 grams of sugar in 20 l of water. The alternative to this statement is 40 grams of sugar.

The highest concentrations of an immediately following in the solvent is called a saturated solution, and any more solute will not breakdown in a liquid medium. Example: A sugar solution.

The sodium ions leave the exterior of the solids when a solvent containing the solute is added, becoming solvated by the solution and initially creating an imbalanced solution. The solution reaches saturation when the maximum amount of solute that can dissolve has done so.

To know more about saturated solution visit:

https://brainly.com/question/1851822

#SPJ4

Answer:

180 kilometers in 2 hours.

Explanation:

To find the distance Leah drove, we need to first determine her average speed. Since Leah was driving east at one-half of her car's top speed, her average speed was 180/2 = 90 kilometers per hour.

Next, we can use this speed to determine the distance she traveled. Since Leah was driving for 2 hours at an average speed of 90 kilometers per hour, she traveled 2 * 90 = 180 kilometers.

Therefore, Leah drove 180 kilometers in 2 hours while driving east at one-half of her car's top speed.

The ratio of the surface areas of The two solids are similar and the ratio between the lengths of their edges is 2:7 is 4:49

The ratio of the surface area can be calculates as follows:

The fact that

The scale factor is the ratio between the equivalent sides of two figures that are similar to one another.

The scale factor in this question is equal to the ratio 2

                                                                                 7

and

Acknowledge this

When two solid are similar, their surface area ratios are equal to the square of the scale factor.

therefore,

The ratio of their surface areas in this question is (2/7)² = 4/49

Your question is incomplete but most probably your full question was

The two solids are similar and the ratio between the lengths of their edges is 2:7 what is the ratio of their surface areas?

Learn more about scale factor at https://brainly.com/question/14289582

#SPJ4

Answer:

its because due to The lack of awareness is the major barrier for using ethane as a transportation fuel.

Explanation:

hope this helped:)

brainliest for the brains:)

The unknown solution added to the sample which turn the sample yellow is potassium nitrate.

Potassium chromate is an ionic compound formed by the lose of electrons from potassium to chromate group. Chromium can exists in both +3,  +4 and +7.

When chromate changes to dichromate in an alkaline medium, the color changes from orange to yellow.  The addition of potassium nitrate to the aqueous chromate solution leads to the formation of potassium dichromate.

Potassium dichromate is orange in color. When it releases the dichromate ions to the solution it turns the color to yellow.Hence, option b is correct.

To find more on potassium dichromate, refer here:

https://brainly.com/question/14558965

#SPJ1

Correct match Sodium Hypochlorite with SDS information is:

Physical State: Liquid and colorless

Route of Exposure and Symptoms: Eye contact, skin contact, inhalation, and ingestion.

Fire-fighting Measures: To extinguish media use water spray dry.

Safe Storage: away from incompatible substances.

Environmental/ Ecotoxicity: sewers or waterway.

Sodium hypochlorite is an inorganic chemical compound with the formula NaOCl comprising a sodium cation (Na⁺) and a hypochlorite anion (OCl⁻ or ClO⁻).

It can also refer as the sodium salt of hypochlorous acid. The anhydrous compound is unstable and can decompose explosively. It is crystallized as a pentahydrate NaOCl·5H₂O, a greenish-yellow solid which is not explosive.

Sodium hypochlorite is often a pale greenish-yellow dilute solution as liquid bleach, which is a household chemical used as a disinfectant or a bleaching agent. In solution, this compound is unstable and easily decomposes, releasing chlorine, still the oldest chlorine-based bleach.

Sodium Hypochlorite has corrosive properties, and reaction products make it a significant safety risk.

Learn more about Sodium Hypochlorite, here:

https://brainly.com/question/10423391

#SPJ4

Answer:

The most simple way to identify an ionic compound is to check if the chemical compound is made of just two elements wherein one element can be a metal (belonging to any groups 1, 2 or 3) and the second element is a non-metal, (from group 5, 6 or 7).

Explanation:

According to the modern VSEPR theory, the shape of  [tex]PF^{+}_4[/tex] is Tetrahedral. The predicted Cl - B - Cl bond angle forming  [tex]BCl_{3}[/tex]  is 120°. The molecular geometry (shape) of  [tex]SF_{4}[/tex] is See-saw.

According to the modern VSEPR theory, we can calculate geometry(shape) by calculating the valence electrons.

number of electron - shape

6 - Trigonal

8 - Tetrahedral

10 - Trigonal bipyramidal (TBP)

12 - Octahedral

a. [tex]PF^{+}_4[/tex]

Here, the total valence electrons = 5 + 4 - 1 = 8.

valence electrons of P = 5

Valence electrons of F = 1.

hence, we get the total  F = 4.

So, the number of valence electrons is 8. So the shape is Tetrahedral.

b. [tex]BCl_{3}[/tex]

Here, the total valence electrons = 3 + 3 = 6.

this means that the shape is trigonal planar.

So, the predicted Cl - B - Cl bond angle forming  [tex]BCl_{3}[/tex]  is 120°.

c. [tex]SF_{4}[/tex]

Here, the total valence electrons = 6 + 4 = 10.

valence electrons of P = 6

Valence electrons of 4 F = 4.

So, the number of valence electrons is 10. So the shape is Trigonal Bipyramidal (TBP).

Geometry is TBP according to VSEPR but the shape is see-saw according to Bents rule.

Check out the molecular geometry (shape) given below.

Read more about VSEPR Theory:

brainly.com/question/26498231

#SPJ4

The number of moles of the hydrogen at the beginning is  5.0. Option C

In this case, we have that the system does include the hydrogen gas, the nitrogen gas and the ammonia gas. The analysis of the mixture has shown the amount of each of the species that we have at equilibrium.

All we need to do is to look at the amount of the ammonia that we have at the point of equilibrium and this would give us the value of M. We would then have that at equilibrium;

3.2 = M - (1.8)

M = 3.2 + (1.8)

M = 5.0

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

4A1+30₂ → 2Al₂O3,6.0 mol Al can form 3.0 mol Al2O3 and 4.0 mol O2 can form 2.7 mol Al2O3. Oxygen reactant is limiting. Therefore, option 2 is correct.

The limiting reagent is a substance that prevents a chemical reaction from occurring completely. When a limiting reagent is used in a chemical reaction, the atoms, molecules, or ions of the other reactant that it (the limiting reagent) reacts with will either stay free or unreacted.

As you can see, O2 creates less of the final good. Therefore, the limiting reactant is O2. Keep in mind that the limiting reactant is the one that depletes before the other reactant(s) are fully reacted. As a result, 2.7 moles of Al2O3 were actually created.

Thus, option 2 is correct.

To learn more about limiting reactant, follow the link;

https://brainly.com/question/14225536

#SPJ1

Magnesium oxide (MgO) can be converted into Mg by reducing MgO with help of carbon.

The balanced chemical reaction for the above reaction is given as:

MgO (s) + C (s) → Mg (s) + CO (g)

Lets check if the reaction is spontaneous,

ΔGο = ΔHo − TΔSo

ΔGo = 491.18 − 298 × [197.67×10⁻³]

ΔGo = 432.27kJ

Thus reaction is non-spontaneous at 298K. For spontaneous nature

ΔGo = −ve      i.e.,        TΔSo > ΔHo

or T × [197.67×10⁻³ ] > 419.18

or T > 491.18 / 197.67 × 10⁻³ >  >2120.6K

​Hence, MgO can be reduced to Mg by using C at T more than 2120.6K.

Learn more about spontaneous reaction from the link given below.

https://brainly.com/question/13790391

#SPJ4

Culinary emulsion can disperse fat into the water, but it cannot disperse water into the fat. The sentence is True.

The two types of culinary emulsions are fat dissolved in water and water dissolved in fat. The emulsions of fat and water that are most frequently used are hollandaise, mayonnaise, aioli, milk, and pan sauces. The most typical forms of water in fat emulsifications are vinaigrettes and whole butter. The vinaigrette is made by mixing vinegar and oil. Mayonnaise is typically made with egg yolks and oil. Aioli is made with garlic and oil. Milk sauces can be made with any type of milk, but are mostly commonly seen in cream sauces. The fat in butter is emulsified with water. The butter is created when the butterfat is emulsified with salt and water.

Therefore, the given statement is right.

To learn more about Fat, Here :

https://brainly.com/question/28026434?referrer=searchResults

Answer: its false

Explanation: got it right on test

Answer:

Explanation:

Well put simply, all our beautiful lakes this time of year are cold after a long winter. If you are enjoying a nice sunny, warm calm day, then the temperature drops 20 degrees as a breeze swings in from the lake, we call that a lake breeze. You can blame the specific heat as to why that occurs. Specific heat is defined by the amount of energy required to raise a unit of mass of a substance by a degree. For our purposes it is how much heat energy it takes to raise the same amount of water as it does land.

The given question is incomplete, and hence, can not be answered. Still, adding some relevant information for your reference.

What is vapor pressure?

Vapor pressure , or equilibrium vapor pressure, is the pressure produced by a vapor in thermodynamic equilibrium with a condensed phase (solid or liquid) at a given temperature. Defined as applied pressure. temperature in a closed system. Equilibrium vapor pressure is a measure of the evaporation rate of a liquid. This refers to the tendency of particles to escape from liquids (or solids). Substances that have a high vapor pressure at room temperature are often called volatile. The pressure that vapor exerts on the liquid surface is known as vapor pressure. As the temperature of a liquid increases, so does the kinetic energy of its molecules. As the kinetic energy of the molecules increases, the number of molecules that become vapor also increases, increasing the vapor pressure.

The given question is incomplete, and hence, can not be answered. Still, adding some relevant information for your reference.

To know more about vapor pressure, visit:

https://brainly.com/question/4463307

#SPJ4

PVC pressure pipe should be operated at a maximum temperature of 140°F. PVC pipe and culvert stiffens as temperature drops and becomes more flexible as temperature rises. Published pipe stiffness figures, like dimensions as well as pressure capacity, are only valid for 73°F temperature applications.

Polyvinyl chloride is the third most widely manufactured polymeric material of plastic in the world. Every year, around 40 million metric tonnes of PVC are produced. PVC is classified into two types: rigid and flexible. PVC rigid is used in building projects for pipe and profile applications like doors and windows.

PVC, the third most common synthetic plastic polymer, can be manufactured with rigid or versatile properties. Its ability to meld with other materials is well-known.

Learn more about polymer from

https://brainly.com/question/17354715

#SPJ4

Conductivity level probes can only be used with conductive liquids.

a) True

The conductivity probe is the level of point measuring system consist of two or more probes or electrodes or electrodes and vessel ,the material in the vessel completes the circuit when the level will rise in the vessel. A probe is the insertable device which have the sensor. the conductive liquids are that are the solution of the acids , the bases and the salts. sugar solution and the distilled water are poor conductors.

Thus, it is true that , Conductivity level probes can only be used with conductive liquids.

To learn more about conductivity here

https://brainly.com/question/28869256

#SPJ4

Lewis valence electron dot structure is a representationof the valence electrons of an atom. It uses dots around the symbol of tye element.

In the Lewis dot structure the dots are arranged to the right and left and above and below the symbol with no more than two dots on a side. It does not matter what order the positions are used. It is used to show how the electrons are arranged around individual atoms in a molecule. It is used to find the electronic configuration of the element. To draw the Lewis structure we need to know the total number of valence electrons present. The number of valence electrons in an individual atom can be found based on the atom’s group number in the periodic table. Then we need to determine the central atom.

To learn more about Lewis dot structure please visit:

https://brainly.com/question/20300458

#SPJ4

Answer:

a double covalent bond

Explanation:

Appropriate benefit of dietary fiber intake to its associated disease.- c. Decreases intestinal transit time and exposure to potential toxins

Cardiovascular diseases (CVDs) are the most common cause of death worldwide, claiming the lives of an estimated 17.9 million persons each year. CVDs are a group of heart and blood disorders that include coronary artery disease, vascular disease, rheumatic fever, and others. Coronary heart disease could be cured, but treatment can help manage the symptoms and lower the risk of conditions such as heart attacks. Treatment may include changes in lifestyle, such as physical activity and quitting smoking. The most common symptom of heart disease is heart disease (CHD), which kills approximately 382,820 people every year. Every year, approximately 805,000 Americans suffer a heart attack.

To learn more about disease here:

https://brainly.com/question/8611708

#SPJ4

The connection among hydrogen and carbon was broken when one molecules of gas  (methane)  reacted with two molecule of oxygen in a specific process.

Massive natural sources of gas include termite digestion, emission from wetlands and seas, and ocean currents. Production of rice, landfills, raising of cattle and other reproductive animals (cow burps! ), and energy production are examples of sources linked to human activity.

Methane was non-toxic and poses no danger when inhaled in small amounts, but if significant amounts of the gas are allowed to replace air, the lack of oxygen could cause suffocating.

To know more about methane visit:

https://brainly.com/question/2127750

#SPJ1

0.750 moles of C12H22O11 are needed to prepare 2.50 L of a 0.300 M solution.

Molarity is a measure of concentration that can be used to determine how many moles of a particular substance are needed to prepare a given volume of a solution with a given concentration. In this problem, we are asked to calculate how many moles of C12H22O11 are needed to prepare 2.50 L of a 0.300 M solution.

To solve this problem, we will first use the molarity equation, which states that molarity (M) is equal to the moles of solute (n) divided by the volume of solution (V):

M = n/V

We can then rearrange the equation to calculate the number of moles of solute needed to prepare a given volume of solution with a given molarity:

n = M x V

Plugging in the values from the problem, we get:

n = 0.300 M x 2.50 L

This yields a result of 0.750 moles of C12H22O11 needed to prepare 2.50 L of a 0.300 M solution.

Alternatively, if we were given the moles of solute needed to prepare a given volume of solution with a given molarity, we could use the molarity equation to calculate the molarity of the solution. For example, if we were given that 0.430 moles of C12H22O11 are needed to prepare 2.50 L of a solution, then we could calculate the molarity of the solution as follows:

M = n/V

M = 0.430 moles / 2.50 L

This yields a result of 0.172 M.

Learn more about Molarity at : https://brainly.com/question/8732513

#SPJ4

Answer:

The boiling point is the temperature at which a liquid boils and changes into a gas. At the boiling point, the vapor pressure of the liquid is equal to the atmospheric pressure.

The melting point is the temperature at which a solid changes into a liquid. At the melting point, the solid and liquid phases are in equilibrium and the substance can exist in either phase.

The boiling point and melting point of a substance depend on the intermolecular forces between the molecules in the substance. Substances with strong intermolecular forces, such as covalent compounds, tend to have higher boiling points and melting points than substances with weaker intermolecular forces, such as ionic compounds. The boiling point and melting point of a substance also depend on the pressure under which the substance is being heated or cooled. For example, the boiling point of water is lower at high altitudes, where the atmospheric pressure is lower.

The percent composition of lithium bromide is 91.9% bromine and 8.1% lithium.

This can be calculated by dividing the mass of each element in the compound by the total mass of the compound, and then multiplying by 100 to get the percent composition.

For bromine, the mass is 4.96 g and for lithium, the mass is 0.43 g.

Therefore, the percent composition of bromine is (4.96/5.39) x 100 = 91.9%, and the percent composition of lithium is (0.43/5.39) x 100 = 8.1%.

To know more about chemical compound, click

https://brainly.com/question/2648746

The freezing point depression of a 0.1 m sodium chloride solution is nearly twice that of a 0.1 m glucose solution because sodium chloride is a stronger electrolyte than glucose.

Glucose solution is a liquid form of glucose, a simple sugar found naturally in fruits, vegetables and other foods. Glucose is an important source of energy for the human body, and it is a necessary component of many biochemical reactions. Glucose solutions are used in a variety of medical and scientific settings, such as to provide nutrition to hospitalized patients, to feed cells in tissue cultures, and to calibrate medical lab equipment. Glucose solutions are often prepared in a laboratory by dissolving a known amount of glucose powder in distilled water. The concentration of glucose in the solution is usually expressed as the percentage of glucose by weight. Solutions with a higher concentration of glucose are referred to as hypertonic, while those with a lower concentration are referred to as hypotonic.

When a solution contains an electrolyte, the ions it produces interact with the water molecules and reduce their ability to form hydrogen bonds. This reduces the amount of energy needed to freeze the solution and therefore decreases the freezing point. Since sodium chloride produces more ions than glucose, the freezing point depression of the sodium chloride solution is greater.

To learn more about glucose solution
https://brainly.com/question/19863770
#SPJ4

Although frequent handling and living near seawater can cause pewter to oxidize and discolor, pewter does not tarnish like silver and copper. Warm, soapy water can be used to clean pewter. After rinsing, the metal can be towel dried.

Lead-free and secure to use, modern pewter. It is primarily comprised of tin, with some antimony and copper. The goods are guaranteed to be lead-free and are perfectly safe to be used for all types of food and beverages, claims one maker.

30 percent lead and 70 percent tin were the main components of ancient pewter. With time, this pewter, sometimes known as black metal, darkened significantly, and lead rapidly leached out when it came into touch with acidic foods.

To know more about pewter visit:-

https://brainly.com/question/29550356

#SPJ4

The partial pressure of the hydrogen is 718.24 torr

The volume of the hydrogen is 273.6 mL

We know that the partial pressure is the pressure of a gas that is part of a mixture of gases. Following the law of the partial pressures, it is clear that the number of gases that can be mixed would give rise to the combination of gases that we can call a mixture of gasses.

The total pressure of the mixture of gases can be obtained by the use of the formula that was deduced from the Dalton's law of partial pressures.

Vapor pressure of water in torr = 23.76 torr

Partial pressure of the hydrogen = 742 torr - 23.76 torr

= 718.24 torr

Pressure in atm = 0.95 atm

From the Boyle's law to get the volume;

[tex]P_{1}[/tex][tex]V_{1}[/tex] = [tex]P_{2}[/tex][tex]V_{2}[/tex]

[tex]V_{2}[/tex] = 0.95 atm * 288/1.00 atm

[tex]V_{2}[/tex] = 273.6 mL

Learn more about gas laws:https://brainly.com/question/12669509

#SPJ1