Answer:
b
Explanation:
radiation can treat tumors.
Answer:
B. Treat tumors in the body
Explanation:
took quiz
Given equal time periods, which statement about radioactive waste is correct?
A. Radioactive decay and nuclear fission always generate the same amount of waste.
B. Nuclear fusion generates less radioactive waste than radioactive decay does.
C. Nuclear fusion generates less radioactive waste than nuclear fission does.
D. Nuclear fission generates less radioactive waste than radioactive decay does.
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-
Answer:
mechanic and potential?
Explanation:
The half-life of Cs-137 is 30.2 years. If the initial mass of the sample is 1.00 kg, how much will remain after 151 years?
A.There will be 0.062 kg left after 151 years.
B.There will be 2.000 kg left after 151 years.
C.There will be 0.031 kg left after 151 years.
D.There will be 0.500 kg left after 151 years.
Answer:can someone help
Explanation:
How are radio waves modified to send information?
Answer:
Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.
Explanation:
Hope this helped!!!
This parallel circuit has three resistors R1-120 ohm; R2-45 ohm: R3=360
ohm and a power source of 240 volts.. Find the total resistance of the
circuit.
O 2.491 ohm
O 1.382 ohm
O 0.582 ohm
O 0.033 ohm
Answer:
the answer is 30 Ohms. Not found in the options provided
what are the objectives of the tourist for visiting Nepal write in points
Answer:
The objectives of the tourist for visiting Nepal are .
It is naturally decorative .Highest mountain ️ of the world mt.everest is situated in Nepal .many rivers are there for rafting .different types of land and climate can be found .many historical , religious and cultural site are present here to visit .hope it is helpful to you ☺️
As distance increases, gravitational force________
Answer:
Decreases
Explanation:
Answer:
Decreases
ExplanatIon:
How was our galaxy formed?
Answer:
according to big bang theory our galaxy was formed 13billion years ago and then made the stars and galaxies we see today. ... The universe began as a very hot, small, and dense superforce (the mix of the four fundamental forces), with no stars, atoms, form, or structure (called a "singularity).
LITERALLY HELP IMBEGGING YOU GUYS ANYONE IM NEEED HELP
Explanation:
The energy of a photon is given by :
[tex]E=\dfrac{hc}{\lambda}[/tex]
Where
h is Planck's constant
c is the speed of light
[tex]\lambda[/tex] is wavelength
or
[tex]E=hf[/tex], f is the frequency
Energy is directly proportional to the frequency of an object.
The energy transported by a wave is directly proportional to the square of the amplitude.
How much force required to prevent a book from falling if the mass of the book is 50 grams?
Answer:
The gravitational force on a mass is its weight. We can write this in vector form, where
→
w
is weight and m is mass, as
→
w
=
m
→
g
.
In scalar form, we can write
w
=
m
g
.
Since
g
=
9.80
m/s
2
on Earth, the weight of a 1.00-kg object on Earth is 9.80 N:
w
=
m
g
=
(
1.00
kg
)
(
9.80
m/s
2
)
=
9.80
N
Explanation:
How many cups of water should you drink in a day?
Answer:
about 2.7liters for women and 3.7liters for men
Explanation:
In this system, ___________________ energy from the sunlight causes the solar panel to create ___________________ energy which flows into the incandescent light bulb. In the light bulb, the ___________________ energy is transformed into two different types of energy: ___________________ energy and ___________________ energy.
Answer:
solar, heat,heat, light
A positive charge moving with a constant velocity v enters a region
of a uniform magnetic field pointing to the top of the page. What
is the direction of the magnetic force on the charge?
A. Left.
B. Right.
C. To the bottom of the page.
D. To the t&p of the page.
E. There is no magnetic force on the charge.
A 10cm3 sample of copper has a density of 897g/cm3. What is the mass of the sample?
A 10cm³ sample of copper has a density of 897g/cm³. What is the mass of the sample ?
Answer:-Given:-Density of sample of copper is 897g/cm³.
Volume of sample of copper is 10cm³.
To Find:-The mass of the sample.
Solution:-We know,
[tex] { \boxed{\bf{\rm \red {Mass \: = \: Density \: × \: Volume}}}} [/tex]
So, Mass = 897g/cm³ × 10cm³
Mass = 8970 g
The mass of the sample is 8970 g. [Answer]A magnet can generate an electric current in a wire if the magnet is close enough to the wire and if the magnet is also
A.)strong
B.)weak.
C.)at rest.
D.)in motion.
Answer:a stro
Explanation:
A magnet can generate an electric current in a wire if the magnet is close enough to the wire and if the magnet is also in motion. The correct answer is D) in motion.
What is electromagnetic induction?When a magnetic field is in motion with respect to a conductor, such as a wire, it induces an electric current in the wire. This is because the changing magnetic field creates a changing electric field around the wire, which causes electrons to flow. The induced electric current is proportional to the rate of change of the magnetic field. This consequence is known as electromagnetic induction.
The strength of the magnetic field does affect the magnitude of the induced electric current, but the magnetic field must be in motion in order to generate an electric current.
A weak magnetic field can still generate an electric current in a wire if it is in motion with respect to the wire.
If a magnetic field is at rest, it will not induce an electric current in a wire. The magnetic field must be in motion in order to generate an electric current.
Thus, the correct answer is D) in motion.
Learn more about electromagnetic induction here:
https://brainly.com/question/1305957
#SPJ6
Find the Y component of 35m/s at 57 degrees from the X-axis.
Answer:
35m/s[57o].
X = 35*Cos57 =
Y = 35*sin7 =Explanation:
learn man but there u go
The Y component of the velocity 35 m/s is 29.35 m/s.
What is a projectile?A projectile can be defined as an object upon which experiences only force is gravity. The projectile covers the path with a parabolic trajectory because of the effect of gravity. No horizontal forces act upon projectiles which causes no horizontal acceleration.
The velocity of a projectile is divided into two components one is the horizontal component and the other is the vertical component.
If the projectile makes an angle θ with the X- axis.
The vertical component of the velocity, Vy = Vsinθ
The horizontal component of the velocity, Vx = Vcosθ
Given the angle θ with the X- axis = 57°
The velocity of the projectile V = 35 m/s
Then the vertical or Y component of the velocity, Vy = Vsinθ =
Y component = 35× sin 57°
Vy = 29.35 m/s
Learn more about the projectile's velocity components, here:
brainly.com/question/14478315
#SPJ2
Select the correct answer.
Which situation will have the highest resistance?
А. long wire and high temperature
B. short wire and high temperature
C. long wire and cold temperature
D. short wire and low temperature
Describe the three methods of thermal energy transfer and provide a sketch that depicts each:
Conduction:
Convection:
Radiation:
Answer:
a)the process by which heat or electricity is directly transmitted through the material of a substance when there is a difference of temperature
b)the movement caused within a fluid by the tendency of hotter and therefore less dense material to rise, and colder, denser material to sink under the influence of gravity, which consequently results in transfer of heat
c)radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium.
what is th resistance force when you walk up an inclined plane?
Explanation:
Friction is a force that offers resistance to movement when one object is in contact with another
Answer:
Friction is a force.
Explanation:
Have a wonderful day.
In the process of photosynthesis, how do plants obtain the water, carbon dioxide, and energy they use for this process?
Answer:
They get it from the air and soil. They also take energy from the sun.
Explanation:
During photosynthesis, plants take in carbon dioxide (CO2) and water (H2O) from the air and soil.
Which changes in surface water movement are likely
to occur when vegetation is removed from the side of
a hill?
A) infiltration decreases and runoff decreases
B) infiltration decreases and runoff increases
C) infiltration increases and runoff decreases
D) infiltration increases and runoff increases
Answer:
infiltration decreases and runoff increase
Explanation:
The changes in surface water movement which is likely to occur when vegetation is removed from the side of a hill is infiltration decreases and runoff increases.
What is surface overflow?Surface overflow is the flow of water which take place on the surface of the ground. The extra water due to rain or flood arises on the ground or at the surface, flows in the nearby lacks or ponds.
Now if the vegetation is removed, great amount of water started to come from the hills. The result of it, more water started to overflow on the land of the surface. This way the runoff increases.
Infiltration is the way by which the ground level water enters into the soil of the earth.
Now, if the vegetation is removed, a lot of amounts of water started to come from the hills. This excess amount of water does not enter in to the soil of the earth.
The changes in surface water movement which is likely to occur when vegetation is removed from the side of a hill is infiltration decreases and runoff increases.
Learn more about the Infiltration here;
https://brainly.com/question/15362770
doing work alawyas means blank energy
Answer:
Transferring energy
Explanation:
Doing work always mean Transferring energy.
A load uses a current of 5.0 A when it is attached to a 20 V source. What is the resistance of the load?
Answer: 4.0 ohm
Explanation:
Can someone help me with this science one please
what is the line that joins northen and southren hemisphere of the earth is called a
The line is called equator.
describe the motion of the box as a result of the forces acting on it.
(picture cuts off right and left measurements- right is 100N, and left is 50N.)
The small piston of a hydraulic lift has an area of 0.20 m2. A car weighing 1200 N sits on a rack mounted on the large piston. The large piston has an area of 0.90 m2. What is the mechanical advantage of the hydraulic lift?
Answer:
4.5
Explanation:
Given the following
Weight of the car = 1200N (Load)
Let us get the effort by using the formula;
F1/A1 = F2/A2
Substitute the given values
1200/0.9 = F2/0.2
Cross multiply
0.9F2 = 1200 * 0.2
0.9F2 = 240
F2 = 240/0.9
F2 = 266.67N
Hence the effort is 266.67N
Mechanical Advntage = Load/Effort
MA = 1200/266.67
MA = 4.5
Hence he mechanical advantage of the hydraulic lift is 4.5
Mental health disorders may NOT affect...
O
A person's motivation levels
O
The ability to make decisions
о
A person's memory or ability to make new memories
A person's ability to breathe
In my opinion, mental health can affect all of these options. However, I think the answer this is looking for would be "A person's ability to breathe"
Mental health definitely affects motivation; and motivation affects mental health. Motivation is a driving force behind human behaviours; its absence can lead to mental illnesses such as depression. Often when someone is depressed, they lack the motivation to do things.
Mental health can affect decision making as well- for example, if someone has anxiety, decision-making can be harder. Anxiety disrupts the decision-making regions in the prefrontal cortex.
Mental health can also affect memory- Depression has been linked to memory problems, such as forgetfulness. Depression is associated with short-term memory loss. Stress and anxiety can also lead to poor memory.
I would say that panic attacks can inhibit a person from breathing, but considering the options I would say that's the best one. Breathing is more of a physical thing, not associated with the brain or mental condition. So the answer is A person's ability to breathe.
True or false? In a linear relationship, a change in one variable will always result in a change of the
same size in the other variable.
The statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.
What is a linear relationship?A linear relationship is a type of association between two variables where a change in one produces a direct modification in the another one.
A linear relationship may change depending on the rate of change and therefore the size of this variation is not the same.
In conclusion, the statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.
Learn more about linear relationships here:
https://brainly.com/question/6691346
#SPJ1
After rubbing a rubber brush on wool, Gilbert is able to use the brush to pick up small strips of paper. What causes the paper to be attracted to the brush?
A.) gravity
B.)electric current
C.) static electricity
D.)magnetism
After rubbing the a rubber brush on the wool it gets a charge acquired by the passage of electrons. The electrons from the wools escapes to the brush and thus the paper get attracted to electrons in the brush. Hence, option B is correct.
What is electric current?Electric current is the passage of electrons from the negative end to positive end of a potential difference.
When a an object is rubbed on a conducting material it gets some electrons into it. When this material comes in contact with another object which have random distribution of charges will attracts the electrons by its positive end.
The rubber brush gets negatively charged on rubbing. Paper have positive and negative charges in random. When it comes in contact with the negatively charged brush the electrons in the paper repelled away.
The positive charges thus accumulates on the other end of the paper and attracted to the brush. This is an example of static current. Hence option B is correct.
To find more about static current, refer the link below:
https://brainly.com/question/17028207
#SPJ2