hich command shows times users logged in and out of the system? select one: a. tail b. last c. logger d. seaudit

According to the National Institute of Standards and Technology (NIST) guidelines,

Mateo does not need to include irrelevant or immaterial information in the mobile device forensic report. The report should only contain relevant and significant findings and evidence related to the crime investigation.

Mateo should also ensure that the report follows the NIST guidelines for forensic reports to ensure its accuracy and reliability.

He also does not need to include his personal opinions or speculative information in the mobile device forensic report. He should focus on presenting factual, objective, and accurate findings based on the examination of the mobile device.

To learn more about NIST click here

brainly.com/question/30167392

#SPJ11

The term "parent-phenotype combination" refers to the pairing of two parents with specific observable traits (phenotypes) in a genetic cross. The second parent-phenotype combination would be the second pair of parents with their respective phenotypes being considered in a genetic study or experiment.

Explanation:

The second parent-phenotype combination refers to the genetic makeup of the second parent and how their traits are expressed in the offspring. A phenotype is the observable characteristics of an organism, such as its physical appearance, behavior, and biochemical traits. When two parents reproduce, their genetic information combines to create a unique set of traits in their offspring. The second parent-phenotype combination is important in understanding the genetic inheritance of traits and the likelihood of certain characteristics being passed down to future generations.

For example, in a Punnett square used to predict the probability of certain traits in the offspring of two parents, the second parent-phenotype combination would refer to the genotype and phenotype of the parent represented in the square's second column. This information is important for understanding how traits are inherited and can be used to make predictions about the characteristics of future generations.

To know more about phenotype combinations click here:

https://brainly.com/question/31519049

#SPJ11

The statement "The worst case running time of quick sort is O(nlogn), where n is the number of elements that to be sorted" is False.

Quick sort is a widely used sorting algorithm, which works by selecting a 'pivot' element and partitioning the input array around the pivot. In the average case, quick sort has a running time of O(nlogn). However, in the worst case, when the pivot is either the smallest or largest element, the running time becomes O(n^2). This is because the partitioning becomes very unbalanced, leading to inefficient performance. To avoid the worst case, various techniques can be employed, such as choosing a random pivot or the median of the first, middle, and last elements.

Learn more about algorithm here:

https://brainly.com/question/22984934

#SPJ11

The best data type for a variable to store a person's height in meters would be option (b) float. This is because float allows for the storage of decimal numbers, which is necessary when representing height in meters, as it can include both whole numbers and fractions.

The best data type to store a person's height in meters would be "float". This is because a person's height can have decimal values (for example, 1.75 meters) which cannot be stored using the "int" data type. Using an int, byte, or char would only allow for whole numbers and could lead to inaccuracies in height representation. A boolean is not suitable, as it only stores true or false values. Lastly, a String is not ideal, as it is meant to store text rather than numerical values. "Boolean" is a data type that can only hold two values (true or false) and is not suitable for storing numeric values like height. "Char" and "byte" are also not appropriate for storing decimal values. "String" is a data type used to store a sequence of characters, but it is not efficient to use it to store numerical values, especially when performing calculations. Therefore, the "float" data type, which is used to store decimal values, is the most appropriate option for storing a person's height in meters. It is important to choose the correct data type for a variable as it affects how the variable can be used in the program and how much memory it occupies.

To learn more about data type, click here:

brainly.com/question/21838436

#SPJ11

Demand-paged virtual memory management works well when the locality of reference is high, and most pages accessed are already in memory.

Demand-paged virtual memory management allows the operating system to only bring the necessary pages into memory when they are needed, reducing the amount of memory needed to run programs. It works well when the program being executed has a high locality of reference, meaning that it accesses a small subset of its memory frequently. In such cases, most of the pages accessed by the program are likely to already be in memory, minimizing the number of page faults that occur. "Evil" software that constantly causes page faults would perform very poorly on a demand-paged virtual memory system. Each page fault would result in time-consuming disk access to bring the page into memory, causing the program to slow down significantly. Additionally, the constant page faults would put a strain on the system's resources, leading to increased disk I/O and decreased overall system performance.

learn more about Demand-paged virtual memory here:

https://brainly.com/question/30064001

#SPJ11

The sequence developed by the range given is A. 1 4 7.

The range() function in Python generates a sequence of numbers within a specified range. It takes three arguments: start, stop, and step.

In the given sequence range(1, 10, 3), the starting number is 1, the ending number is 10, and the step size is 3. This means that the sequence will start at 1 and increment by 3 until it reaches a number that is greater than or equal to 10.

The sequence generated by range(1, 10, 3) is 1, 4, 7. This is because it starts at 1, adds 3 to get 4, adds 3 again to get 7, and then stops because the next number in the sequence (10) is greater than or equal to the ending number specified (10).

Find out more on sequences at https://brainly.com/question/29167841

#SPJ1

The minimum height of a binary tree with 100 vertices is 7.

A binary tree with n vertices has a minimum height of log2(n+1)-1. Therefore, in this case, log2(100+1)-1=6.6438. Since the height of a binary tree must be an integer, the minimum height of the tree is 7. This means that the tree can have a maximum of 128 vertices with a height of 7.

The height of a binary tree represents the number of edges on the longest path from the root to a leaf node. A binary tree with a small height is desirable as it results in faster search, insertion and deletion operations.

Learn more about binary here:

https://brainly.com/question/31413821

#SPJ11

The statement "The one-time pad is the perfect encryption scheme but is not widely used because key management and distribution is incredibly difficult" is true.

The one-time pad is a theoretically perfect encryption scheme, as it provides information-theoretic security. However, it has significant practical limitations, primarily related to the key management and distribution. Specifically, each key in a one-time pad must be used only once, and the key used for encryption must be as long as the plaintext to be encrypted. Therefore, key distribution and management become difficult and impractical when dealing with large amounts of data. Moreover, the one-time pad does not provide any protection against message integrity or replay attacks, and therefore, it is not widely used in practice.

Learn more about Encryption here:

https://brainly.com/question/30225557

#SPJ11

Answer: False

Explanation:

Segmentation faults occur when a program tries to access memory that it is not supposed to access, or when it tries to perform an illegal operation on memory. These types of errors can be hard to debug.

Logical errors occur when there is a mistake in the program's logic or algorithm, causing an incorrect output. These errors can be easier to identify and debug, since they are a result of a flaw in the program's design.

The answer is : E.  Copy the contents of register t0 into the memory address, 4.

The instruction "sw $t0, 0($t1)" in MIPS stands for "store word" and it means to copy the contents of register t0 into the memory address specified by the sum of the contents of register t1 and the immediate value 0. Therefore, the correct answer is E, which states that the contents of register t0 will be copied into the memory address specified.

To know more about registers, please visit:

https://brainly.com/question/16740765

#SPJ11

When selecting a UIC hierarchy, it is important to keep in mind that if the results exceed 1,000, then an error message will be displayed prompting the user to select a lower level UIC.

This is to ensure that the search results remain manageable and accurate. It is recommended to carefully consider the desired level of granularity when selecting a UIC hierarchy to avoid receiving this error message.

When selecting a UIC hierarchy, follow these steps:

1. Choose the desired UIC hierarchy level.
2. Check the number of results obtained.
3. If the results are greater than 1,000, an error message will be displayed.
4. In case of an error message, select a lower level UIC (more specific) to reduce the number of results.
5. Continue refining your selection until the results are less than or equal to 1,000.

By following these steps, you can ensure that you are selecting the appropriate UIC hierarchy level to avoid error messages and obtain the desired results.

Learn more about UIC at: brainly.com/question/17373314

#SPJ11

To create a script in Python for temperature distribution in a metallic bar, we need to use finite difference method. We can use numpy and matplotlib libraries for this purpose.

Finite difference method is a numerical technique used to approximate differential equations, including heat conduction equation, which governs the temperature distribution in a metallic bar. In this method, the bar is divided into small cells or grid points, and the temperature at each point is calculated using the surrounding temperatures and thermal properties of the material.

Python provides useful libraries such as numpy for numerical calculations and matplotlib for visualizing the results. We can use these libraries to create a script that generates temperature distribution in a metallic bar based on given initial and boundary conditions. The script can be further optimized by using parallel computing techniques for faster execution on large datasets.

Learn more about Python here:

https://brainly.com/question/30427047

#SPJ11

A program that allows the user to input their expenses, store them in a list, and then calculate the total expenses is given below.

expenses = []

while True:

   expense = input("Enter an expense (or 'done' to finish): ")

   if expense == 'done':

       break

   try:

       expense = float(expense)

   except ValueError:

       print("Invalid input, please enter a valid number.")

       continue

   expenses.append(expense)

total = sum(expenses)

print("Total expenses: $%.2f" % total)

In conclusion, the program allows the user to input their expenses, store them in a list, and them.

Learn more about Program

https://brainly.com/question/26642771

#SPJ1

Create a webpage with an input box and Guess button, which compares user's guess to a random secret number (1-100) and provides feedback (high, low, or correct).

1. Create an HTML file with a text input box and a "Guess" button.

2. Add JavaScript to generate a random secret number between 1 and 100 when the page loads.

3. Create a function that will be triggered when the "Guess" button is clicked.

4. Inside this function, compare the user's guess to the secret number.

5. If the guess is higher, display "High! Guess again."

6. If the guess is lower, display "Low! Guess again."

7. If the guess is equal to the secret number, display "Correct! Game over." and generate a new secret number to start a new game.

8. Repeat steps 4-7 until the user guesses the correct number.

Learn more about JavaScript here:

https://brainly.com/question/28448181

#SPJ11

Unfortunately, it is not possible to use the overload from the last exercise with string literals because they are not string objects in C++. Instead, they are pointers to a constant character, written as const char *. However, you can create a string object from a string literal using the constructor of the std::string class. For example, you can do:

```
std::string myString = "hello world";
```

This will create a string object called myString with the value "hello world". You can then use this string object with the overload from the last exercise.
Hi! I understand that you want to know how to work with string literals in C++ since they are not string objects like in Java, but rather pointers to constant characters (const char*). Here's a step-by-step explanation to handle string literals in C++:

1. First, include the necessary headers in your C++ program:
```cpp
#include
#include
```

2. Now, let's create a function to concatenate two string literals:
```cpp
const char* concatenate(const char* str1, const char* str2) {
   int len1 = strlen(str1);
   int len2 = strlen(str2);

   char* result = new char[len1 + len2 + 1];
   strcpy(result, str1);
   strcat(result, str2);

   return result;
}
```

3. In the main function, use the concatenate function to concatenate two string literals:
```cpp
int main() {
   const char* stringLiteral1 = "Hello, ";
   const char* stringLiteral2 = "World!";
   
   const char* concatenatedString = concatenate(stringLiteral1, stringLiteral2);
   std::cout << "Concatenated string: " << concatenatedString << std::endl;

   delete[] concatenatedString;
   return 0;
}
```

In summary, to handle string literals in C++, you can use pointers to constant characters (const char*) and C-style string manipulation functions like `strlen`, `strcpy`, and `strcat`.

to know more about String here:

brainly.com/question/30099412

#SPJ11

To print an array of strings in RISC-V assembly, you can use a loop to iterate through each element of the array and print each string using the system call for printing.

Here is an example code snippet to print an array of strings in RISC-V assembly:

# assume that the array of strings is stored in memory starting at address a0

# and the length of the array is in a1

# initialize loop counter

li t0, 0

# loop through each element of the array

loop:

   # calculate the address of the current string

   slli t1, t0, 2   # each string pointer is 4 bytes long

   add t1, t1, a0   # add offset to base address to get the string pointer

   # load the current string pointer into a0

   lw a0, 0(t1)

   # call the system call for printing a string

   li a7, 4    # system call for printing a string

   ecall

   # increment loop counter

   addi t0, t0, 1

   # check if we have reached the end of the array

   blt t0, a1, loop

In this example, the loop starts by initializing a loop counter (t0) to zero. Inside the loop, we calculate the address of the current string by adding the loop counter (multiplied by 4, since each string pointer is 4 bytes long) to the base address of the array (a0). We then load the current string pointer into a0 and call the system call for printing a string (li a7, 4 followed by ecall). Finally, we increment the loop counter and check if we have reached the end of the array (blt t0, a1, loop).

So to print an array of strings in RISC-V assembly, you will need to use a loop to iterate through each string and print it to the console.

Learn more about RISC-V assembly

brainly.com/question/30653891

#SPJ11

To print an array of strings in RISC-V assembly, you can use a loop to iterate through each element of the array and print each string using the system call for printing.

Here is an example code snippet to print an array of strings in RISC-V assembly:

# assume that the array of strings is stored in memory starting at address a0

# and the length of the array is in a1

# initialize loop counter

li t0, 0

# loop through each element of the array

loop:

   # calculate the address of the current string

   slli t1, t0, 2   # each string pointer is 4 bytes long

   add t1, t1, a0   # add offset to base address to get the string pointer

   # load the current string pointer into a0

   lw a0, 0(t1)

   # call the system call for printing a string

   li a7, 4    # system call for printing a string

   ecall

   # increment loop counter

   addi t0, t0, 1

   # check if we have reached the end of the array

   blt t0, a1, loop

In this example, the loop starts by initializing a loop counter (t0) to zero. Inside the loop, we calculate the address of the current string by adding the loop counter (multiplied by 4, since each string pointer is 4 bytes long) to the base address of the array (a0). We then load the current string pointer into a0 and call the system call for printing a string (li a7, 4 followed by ecall). Finally, we increment the loop counter and check if we have reached the end of the array (blt t0, a1, loop).

So to print an array of strings in RISC-V assembly, you will need to use a loop to iterate through each string and print it to the console.

Learn more about RISC-V assembly

brainly.com/question/30653891

#SPJ11

The ability of computers to learn dynamically instead of being told explicitly what to do is known as machine learning.

Machine learning techniques have been used for various applications, such as image recognition and analytics as a service. To support these applications, structured query language (SQL) is commonly used to query relational databases. These databases use metadata, such as identifier (or primary key) and foreign key fields, to encode information recorded by bits as 1, 0, or both.

However, a potential issue with this approach is the lost-update problem, which occurs when multiple users attempt to update the same record simultaneously. To address this problem, relational databases often use a crow's-foot notation to notate the maximum number of entities that can be involved in a relationship.

Learn more about machine learning: https://brainly.com/question/25523571

#SPJ11

To calculate the time taken to transmit x KB over a y-Mbps link, you can use the following formula: Time = (x * 8) / (y * 1,000,000), where 8 is the number of bits in a byte and 1,000,000 is the number of bits in a Mbps.

The ratio of x and y is (x * 8) / (y * 1,000,000). 6 Marks b. Regarding the operations on a remote file server: (a) Open a file: This operation is more delay-sensitive because the time taken to access the file depends on the latency and response time of the file server. (b) Read the contents of a file: This operation is more bandwidth-sensitive because the time taken to transfer the file's content depends on the file size and the available bandwidth. (c) List the contents of a directory: This operation is more delay-sensitive because the time taken to retrieve the list of files in a directory depends on the latency and response time of the file server. (d) Display the attributes of a file: This operation is more delay-sensitive because the time taken to retrieve the file's attributes depends on the latency and response time of the file server.

Learn more about byte here-

https://brainly.com/question/31318972

#SPJ11

To convert the given expressions into CNF (Conjunctive Normal Form), we will first eliminate implications and apply distributive laws:the implications have been eliminated, and the formulas are now in CNF.

1. [b ∨ (a ∧ c)] ⇒ (d ∨ ¬ a)
Eliminate the implication:
¬ [b ∨ (a ∧ c)] ∨ (d ∨ ¬ a)
Apply De Morgan's law:
(¬ b ∧ ¬ (a ∧ c)) ∨ (d ∨ ¬ a)
Distribute ¬ across the conjunction:
(¬ b ∧ (¬ a ∨ ¬ c)) ∨ (d ∨ ¬ a)
2. [b ∧ (a ∨ c)] ⇒ d
Eliminate the implication:
¬ [b ∧ (a ∨ c)] ∨ d
Apply De Morgan's law:
(¬ b ∨ ¬ (a ∨ c)) ∨ d
Distribute ¬ across the disjunction:
(¬ b ∨ (¬ a ∧ ¬ c)) ∨ d
In both expressions, the implications have been eliminated, and the formulas are now in CNF.

To learn more about CNF click the link below:

brainly.com/question/31424321

#SPJ11

Answer:

C. UPDATE OrdersCopy

SET ShipVia = 5

Where OrderID IN

(SELECT OrderiD

FROM OrdersCopy

WHERE OrderID=10248):

Explanation: Answer A can be eliminated because the command to change a value is SET not UPDATE. Answer B can be eliminated because as previously stated UPDATE in not the command to change a value. Finally, we can eliminate answer D because it has an orderID of 10258.

Answer:

C. UPDATE OrdersCopy

SET ShipVia = 5

Where OrderID IN

(SELECT OrderiD

FROM OrdersCopy

WHERE OrderID=10248):

Explanation: Answer A can be eliminated because the command to change a value is SET not UPDATE. Answer B can be eliminated because as previously stated UPDATE in not the command to change a value. Finally, we can eliminate answer D because it has an orderID of 10258.

The algorithm you described is efficient in determining if two sequences A and B with n elements, possibly containing duplicates, and on which a total order relation is defined, contain the same set of elements.

The steps of sorting both sequences A and B, removing duplicates, and comparing the sequences element by element, as you described, have the following time complexities:

(a) Sorting: Using an efficient sorting algorithm like Merge Sort or Quick Sort, the time complexity is O(n log n), where n is the number of elements in each sequence.

(b) Removing duplicates: Iterating through the sorted sequences and comparing adjacent elements to remove duplicates has a time complexity of O(n), where n is the number of elements in each sequence.

(c) Comparing sequences: Comparing the sorted and duplicate-free sequences element by element has a time complexity of O(n), where n is the number of elements in each sequence.

Therefore, the overall running time of this algorithm is dominated by the sorting step, resulting in an overall time complexity of O(n log n), making it efficient for large sequences with a total order relation defined.

Know more about algorithm :

https://brainly.com/question/13902805

#SPJ11

we commit the changes to the database and close the cursor and connection objects. We print a message to the user indicating that the criminal has been added successfully.

# Connect to database
conn = psycopg2.connect(database="your_database_name", user="your_username", password="your_password", host="localhost", port="5432")
cur = conn.cursor()
# Prompt user for criminal details
name = input("Enter criminal's name: ")
age = input("Enter criminal's age: ")
crime = input("Enter criminal's crime: ")
# Insert new criminal into table
cur.execute("INSERT INTO criminals (name, age, crime) VALUES (%s, %s, %s)", (name, age, crime))
conn.commit()
# Close database connection
cur.close()
conn.close()
print("Criminal added successfully!")
In this script, we first establish a connection to the database using the psycopg2 library. We then prompt the user for the details of the new criminal to be added - their name, age, and crime.
Using the cursor object, we then execute an SQL INSERT statement to insert the new criminal into the criminals table. We use placeholders (%s) to avoid SQL injection attacks and pass in the user input as a tuple.

To learn more about Database Here:

https://brainly.com/question/30634903

#SPJ11

To write the `zip_generator` function, you should follow these steps:

1. Define the `zip_generator` function with `*iterables` as its argument, which allows it to accept any number of iterables.
2. Find the length of the smallest iterable by using the `min()` function and `len()` function.
3. Use a `for` loop to iterate through the range of the smallest iterable's length.
4. In each iteration, create a new list that contains the nth item of each iterable.
5. Use the `yield` keyword to return the newly created list.

Here's the implementation of the `zip_generator` function:

python
def zip_generator(*iterables):
   # Find the length of the smallest iterable
   min_length = min(len(iterable) for iterable in iterables)

   # Iterate through the range of the smallest iterable's length
   for i in range(min_length):
       # Create a new list containing the nth items of each iterable
       zipped_list = [iterable[i] for iterable in iterables]

       # Yield the newly created list
       yield zipped_list

You can use this `zip_generator` function to zip together any number of iterables and get a series of lists, each containing the nth items of each iterable.

To know more about iteration visit:

https://brainly.com/question/31197563

#SPJ11

Based on the given relation R=(A, B, C, D, E) and the functional dependencies {BC→ADE, D→B}, the best normal form that R satisfies is 2NF.the best normal form for the given relation R is 2NF.

To determine the normal form, we first need to find the candidate keys. In this case, the candidate key is (B, C) because BC→ADE, which covers all attributes in the relation.1NF is satisfied since all attributes have atomic values.2NF is satisfied because there are no partial dependencies. functional dependencies A partial dependency occurs when a non-prime attribute (not part of the candidate key) is functionally dependent on a part of the candidate key. In this case, ADE depends on both B and C (BC→ADE), while B depends on D (D→B). No partial dependencies exist.However, R does not satisfy 3NF, as there is a transitive dependency. A transitive dependency occurs when a non-prime attribute is functionally dependent on another non-prime attribute. Here, D→B and B is a non-prime attribute as it is part of the candidate key. Since there is a transitive dependency, 3NF is not satisfied.

learn more about  functional dependencies here:

https://brainly.com/question/31044411

#SPJ11

Based on the given relation R=(A, B, C, D, E) and the functional dependencies {BC→ADE, D→B}, the best normal form that R satisfies is 2NF.the best normal form for the given relation R is 2NF.

To determine the normal form, we first need to find the candidate keys. In this case, the candidate key is (B, C) because BC→ADE, which covers all attributes in the relation.1NF is satisfied since all attributes have atomic values.2NF is satisfied because there are no partial dependencies. functional dependencies A partial dependency occurs when a non-prime attribute (not part of the candidate key) is functionally dependent on a part of the candidate key. In this case, ADE depends on both B and C (BC→ADE), while B depends on D (D→B). No partial dependencies exist.However, R does not satisfy 3NF, as there is a transitive dependency. A transitive dependency occurs when a non-prime attribute is functionally dependent on another non-prime attribute. Here, D→B and B is a non-prime attribute as it is part of the candidate key. Since there is a transitive dependency, 3NF is not satisfied.

learn more about  functional dependencies here:

https://brainly.com/question/31044411

#SPJ11

1)a[k-2] = 22;
2)a[k+1] = 9;
3)a[n-1] = -1;In C++, integers can be of different sizes and signedness, depending on the range of values they can store.


Array: An array is a collection of similar data items stored in contiguous memory locations that can be accessed by an index or a subscript. In C++, the size of an array must be specified at the time of declaration.

Vector: A vector is a container that can store a dynamic array of elements of a specific data type. Unlike arrays, vectors can be resized at runtime and provide various methods for accessing, inserting, and erasing elements.

Integer: An integer is a data type that represents a whole number, either positive, negative, or zero. In C++, integers can be of different sizes and signedness, depending on the range of values they can store.

Learn more about vector here:

https://brainly.com/question/29740341?referrer=searchResults

#SPJ11

B. All 32 general purpose registers. The register file is a set of memory locations within a processor that can quickly store and retrieve data.

In a typical computer system, the register file contains all 32 general purpose registers, which are used for holding data that is currently being worked on by the processor. The PC Counter, on the other hand, is a special register that holds the memory address of the next instruction to be executed by the processor. It is not typically stored in the register file. Additionally, while the register file can hold data that is being written to or read from registers, it does not hold the data to be written into a register, as this would typically be loaded into a register from memory or from another register using specific instructions.

learn more about register file here:

https://brainly.com/question/28335173

#SPJ11

False. Correctly structured HTML is important for search engine optimization, but it alone cannot guarantee high rankings without quality content. Quality content, such as relevant and engaging text, images, and multimedia, is essential for ranking well on search engines and attracting and retaining website visitors.

Search Engine Optimization (SEO) is the process of optimizing a website to increase its visibility and ranking on search engine results pages. While well-structured HTML can make a website more accessible to search engines, it does not guarantee high rankings on its own. The quality of a website's content is also a crucial factor in SEO. Search engines prioritize websites that offer high-quality, relevant, and engaging content that is optimized for relevant keywords and topics. Without quality content, even the best-structured HTML will not be enough to rank well on search engines.

Learn more about Search engine optimization here:

https://brainly.com/question/28355963

#SPJ11

Verifying whether an item number exists in an array involves searching the array to see if the item is present.

Here are the steps to verify if an item number exists in an array:

Declare an array: First, declare an array and initialize it with some values.

Iterate through the array: Use a loop to iterate through each element of the array.

Check each element: For each element in the array, compare it with the item number that you want to verify.

Return the result: If the item number is found in the array, return true. If it is not found, return false.

Learn more about array on

https://brainly.com/question/28061186

#SPJ1

For the DFA on the right, the language it accepts is L = {w | w contains an odd number of 1's}. In notation, L = {w | #1(w) is odd}, where #1(w) denotes the number of 1's in w.

To give a CFG that generates B, we can first define a nonterminal symbol S that represents the language of all strings that contain at least one 1 in their second half. Then, we can use production rules to generate strings in B starting from S. One possible CFG for B is:

S → 0S | 1S | A
A → 1B8
B → 0B | 1B | ε

Here, the nonterminal symbol A generates all strings that contain the substring "18". The nonterminal symbol B generates all strings that end with "18". The nonterminal symbol S generates all strings that contain at least one such string.

b. To give a PDA that recognizes B, we can use a stack to keep track of the symbols read so far. We can start with an empty stack and push symbols onto it whenever we read a 1. Whenever we read an 8, we can pop symbols from the stack until we reach a 1. If the stack is non-empty at the end of the input, then the string is in B. One possible PDA for B is:

- States: q0, q1, q2
- Input alphabet: {0, 1, 8}
- Stack alphabet: {0, 1, Z}
- Start state: q0
- Start symbol: Z
- Accept states: q2
- Transition function:

1. δ(q0, ε, Z) = (q0, Z)
2. δ(q0, 1, Z) = (q1, 1Z)
3. δ(q1, 1, 1) = (q1, 11)
4. δ(q1, 0, 1) = (q1, 01)
5. δ(q1, 1, 0) = (q1, 10)
6. δ(q1, 8, 1) = (q2, ε)
7. δ(q1, ε, Z) = (q2, Z)

Here, δ(q, a, X) = (p, Y) means that if the PDA is in state q, reads input symbol a, and sees symbol X on top of the stack, then it can transition to state p and replace X with Y on top of the stack. In the above PDA, the stack symbol Z is used as a marker to indicate the bottom of the stack.

For the DFA you mentioned, I'm unable to see the image, but I'll provide general information on the language and notation.
The language, L, that a given DFA accepts can be defined using the notation: L = { w | condition }. The condition is based on the structure and transitions of the DFA, and it ensures that the string w is accepted by the DFA.

For the second part of your question, let I = {0,1} and B be the collection of strings that contain at least one 1 in their second half. B = {uv | u ∈ I*, v = *1* and |u| = |v|}. To give a CFG and PDA that generates and recognizes B respectively, we'll need more specific information about the DFA.

To know more about language click here .

brainly.com/question/20921887

#SPJ11

In ancient Athens, a common task performed both by women and slaves was textile production, specifically spinning and weaving.

This activity was an essential part of daily life, as it was required to produce clothing, bedding, and other fabrics. Women and slaves worked collaboratively on this task, which was usually done at home or in workshops. Their contributions to textile production were highly valued, as these products were vital for personal use and trade. By working together on this important task, women and slaves in Athens played a significant role in the functioning of the society and the economy.

learn more about textile production here:

https://brainly.com/question/8991757

#SPJ11