How is oxide different from a neutral oxygen atom

Answer:

The limiting reactant is the covers.

We are left with 3750 sheets of lined paper, 1125 sheets of graph paper and 25 staples.

Explanation:

the reaction is:

B - book

C - cover

Sl = sheet of lined paper

Sg - sheet of graph paper

St - staple

1B = 2C + 50Sl + 25Sg + 3St

We have covers for 150/2 = 75 books

We have lined paper for 7500/50 = 150 books

We have graph paper for 3000/25 = 120books

We have Staples for 250/3 = 83.(3) books, so for 83 books as we cannot make 1/3 of a book.

Because we only have covers for 75 books, covers are the limiting reactant.

After making 75 books we are left with:

0 covers

7500 - 75*50 = 3750 sheets of lined paper

3000 - 75*25 = 1125 sheets of graph paper

250 - 75*3 = 25 staples

The limiting reactant should be the covers.

We are left with 3750 sheets of lined paper, 1125 sheets of graph paper, and 25 staples.

The reaction should be like:

B - book

C - cover

Sl = sheet of lined paper

Sg - sheet of graph paper

St - staple

Now the equation should be

1B = 2C + 50Sl + 25Sg + 3St

We have covers for 150/2 = 75 books

We have lined paper for 7500/50 = 150 books

We have graph paper for 3000/25 = 120books

We have Staples for 250/3 = 83.(3) books, so for 83 books as we cannot make 1/3 of a book.

Now the left should be

7500 - 75*50 = 3750 sheets of lined paper

3000 - 75*25 = 1125 sheets of graph paper

250 - 75*3 = 25 staples

learn more about reaction here: https://brainly.com/question/9230368

2.50 Kilojoule (2.5 Kj) is the same amount of energy in calories as (A) 598 cal.

To convert kilojoules (Kj) to calories, you can use the conversion factor of 1 kilocalorie (kcal) = 4.184 kilojoules (Kj).

Here, 2.50 Kilojoules (2.5 Kj) is the amount of energy, we can convert it to calories as follows:

2.50 Kj * (1 kcal / 4.184 Kj) = 0.598 kcal

Since 1 kilocalorie (kcal) is equal to 1000 calories (cal), we can further convert:

0.598 kcal * 1000 cal/kcal = 598 cal

Therefore, the same amount of energy as 2.50 Kilojoules (2.5 Kj) is 598 calories.

Learn more about energy (in calories) here, https://brainly.com/question/28589779

#SPJ11

A 0.100 M oxalic acid, HO₂CCO₂H, solution is titrated with 0.100 M KOH. Calculate the pH when 25.00 mL of oxalic acid solution is titrated with 35.00 mL of NaOH. Ka1 = 5.4 × 10−2 and Ka2 = 5.42 × 10−5 for oxalic acid is 1.94.

Oxalic acid is a dicarboxylic acid with the chemical formula HO₂CCO₂H, with a pKa1 of 1.25 and a pKa2 of 4.14. A titration is a process in which a solution of known concentration is added to a solution of unknown concentration until the equivalence point is reached.

The goal of a titration is to determine the concentration of the unknown solution. A 0.100 M oxalic acid solution is titrated with 0.100 M KOH. The pH is calculated when 25.00 mL of oxalic acid solution is titrated with 35.00 mL of NaOH. Ka1 = 5.4 × 10−2 and Ka2 = 5.42 × 10−5 for oxalic acid. Here is how to calculate the pH when 25.00 mL of oxalic acid solution is titrated with 35.00 mL of NaOH:

Step 1: Calculate the moles of oxalic acid

moles of oxalic acid = concentration x volume

moles of oxalic acid = 0.100 M x 0.025 L

moles of oxalic acid = 0.0025 mol

Step 2: Calculate the moles of NaOH

moles of NaOH = concentration x volume

moles of NaOH = 0.100 M x 0.035 L

moles of NaOH = 0.0035 mol

Step 3: Determine which species is in excess

0.0025 mol of oxalic acid reacts with 0.0025 mol of KOH

0.0010 mol of oxalic acid reacts with 0.0035 mol of KOH

0.0010 mol of oxalic acid is consumed in the reaction

The excess moles of NaOH = 0.0035 - 0.0010 = 0.0025 mol

Step 4: Calculate the concentration of the remaining OH- ions

Concentration of OH- ions = moles of OH- ions / volume

Concentration of OH- ions = 0.0025 mol / 0.060 L

Concentration of OH- ions = 0.0417 M

Step 5: Calculate the concentration of H+ ions

Ka1 = [H+][C₂O₄₂-]/[HC₂O₄-]

5.4 x 10^-2 = x^2 / (0.100 - x)

Assuming that x is much smaller than 0.100, x = [H+] = 0.115 M

Step 6: Calculate the pH

pH = -log[H+]

pH = -log(0.115)

pH = 1.94

To know more about oxalic acid refer here: https://brainly.com/question/9939766#

#SPJ11

Answer: Do you have an image so I can solve it?

Answer: I don’t think the answer is A or C. Maybe B.

The word chemosynthesis means

the synthesis of organic compounds by bacteria or other living organisms using energy derived from reactions involving inorganic chemicals, typically in the absence of sunlight.

Explanation:

Answer:

the explanation of this 20

Explanation:

20 c

Answer:

D.  

cut.

Explanation:

Both the appearance and cooking times of food items are affected by the way a piece of food is cut. Thus option D is correct.

Food has an important role in both culture and cuisine of every country, Different types of food combine to form culinary delights which can bring people together

Food is obtained from both plants and animals where Plants are the primary producers in the food pyramid and all organism directly or indirectly obtain food from plants.

Herbivorous animals get their food from their  plant ecosystem where Some animals, obtain food by hunting other animals while others depend on decaying matter of plants and animals  which are called decomposers like bacteria, fungi.

Food offers  variety forms  depend upon climatic conditions and availability and depend on the different factors like Physical determinants ,Biological determinants, Economical determinants.

Thus option D is correct.

Learn more about food, here:

https://brainly.com/question/24177594

#SPJ2

61.9 grams

2.33x10^23 molecules (159.7 g Fe2O3/6.02x10^23 molecules) = 61.9 g

Answer:

I think A I hope it's A

Explanation:

hsjsjakkska

Answer:

I believe the volume should increase.

The “33 percent more for free” deal is better than the “33 percent off” deal. This is because the “33 percent more for free” deal gives you 13.3 ounces of coffee for $10, while the “33 percent off” deal gives you only 6.7 ounces of coffee for $6.67

For the “33 percent more for free” deal:

10 dollars for 10 ounces of coffee

13.3 ounces of coffee for 10 dollars (33% more)

Price per ounce = 10/13.3 = $0.75 per ounce

For the “33 percent off” deal:

10 dollars for 10 ounces of coffee

6.7 ounces of coffee for $6.67 (33% off)

Price per ounce = 6.67/6.7 = $0.99 per ounce

So, the “33 percent more for free” deal is better than the “33 percent off” deal because you get more coffee for your money.

To know more about coffee

https://brainly.com/question/29697224

#SPJ11

The correct answer is D) H2C=O < CH3OH < CH3CH3Explanation:Viscosity is the measure of the resistance of a liquid to flow.

It is the ratio of shear stress to shear rate, which is a measure of how fast the fluid is moving between the plates. It can be measured in different units such as poise or centipoise.The viscosity of a liquid is affected by the attractive forces between the molecules, which depend on the type of molecules and their intermolecular forces. The stronger the intermolecular forces, the more viscous the liquid.In this case, CH3OH (methanol), CH3CH3 (ethane), and H2C=O (acetone) are the compounds to be ranked. Methanol is a polar molecule with hydrogen bonding and has a higher viscosity than ethane, which is nonpolar and has weak van der Waals forces. Acetone is a polar molecule with dipole-dipole interactions that are intermediate between methanol and ethane. The order of increasing viscosity is therefore H2C=O < CH3OH < CH3CH3.

To know more about compounds visit:

https://brainly.com/question/32086879

#SPJ11

The required correct answer is D) 2.70 M

The final concentration of a solution prepared by using 75.0 mL of 18.0 M H2SO4 to prepare 500. mL of solution is 2.70 M. Here's how to calculate it:We will use the formula:M1V1 = M2V2where:M1 = initial molarityV1 = initial volumeM2 = final molarityV2 = final volumeGiven that M1 = 18.0 M, V1 = 75.0 mL, and V2 = 500. mL. We can find M2 as follows:M1V1 = M2V218.0 M x 75.0 mL = M2 x 500. mLM2 = (18.0 M x 75.0 mL)/500. mL= 2.70 MTherefore, the final concentration of the solution is 2.70 M. The correct option is D.

Learn more about Final concentration of a solution Here https://brainly.in/question/19273308

#SPJ11

Answer:

Because water conducts electricity, so if an electrical current were to meet the water while you're in there taking a bath, you would essentially be surrounded by a huge conductor.

Answer:

[tex]\huge\boxed{\sf 1.0 \ mg}[/tex]

Explanation:

Half-life = 73 hours

Disintegration period = 6 days 2 hours = (6*24) hours + 2 hours

= 144 hours + 2 hours

= 146 hours

No. of Half lives = 146 hours / 73 hours

No. of Half lives = 2

Hence, there are 2 half lives passed in 6 days 2 hours.

Amount of thallium-201 left after first half-life:

= 4.0 mg / 2

= 2.0 mg

Amount of thallium-201 left after second half-life:

= 2.0 mg / 2

= 1.0 mg

Hence, the amount of thallium-201 left after 6.0 days and 2 hours is 1.0 mg.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer: If one mole of carbon monoxide has a mass of 28.01 g and one mole of carbon dioxide has a mass of 44.01 g , it follows that the reaction produces 44.01 g of carbon dioxide for every 28.01 g of carbon monoxide.

Explanation: (May Be Unrelated?)

The dissolution of gases in water is exothermic therefore oceans will dissolve less CO2 as their temperatures rise.

The term  effervescence refers to the rise of a gas in a system or simply put, it is the evolution of gas. When an  effervescent tablet is placed in the water under each inverted glass, a gas will rise in each glass.

The air space in the hot glass  is greater than the air space in the cold glass  We can see that the gas has a lower solubility in hot water than in cold water. This is because, solubility of gases is exothermic.

The bottle that is left in the hot sun will have more fizzing because the CO2 does not dissolve owing to the higher temperature.

The rise in ocean temperature means that the oceans will dissolve less CO2 in the future and reduce the CO2 holding capacity of the oceans.

Learn more about CO2: https://brainly.com/question/867804?

I think producer

option is A

Answer:

B. Producer

Explanation:

A producer is normally a type of plant which is food for the animals. Decomposers are things that decompose dead living things into nutrients and etc. Consumers are the ones who normally feed on producers in the food web and are small animals.

The element for the given electron configuration 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁰ is Chromium (Cr).

An element's electron configuration is a numeric representation of how the electrons are distributed among the various energy levels and orbitals. It may provide valuable insights into an element's chemical properties and reactions. To comprehend this electron configuration, we'll go through each sublevel from the lowest to the highest energy level: 1s², 2s², 2p⁶, 3s², 3p⁶, 3d¹⁰, 4s², and 4p⁰.

The 1s sublevel contains two electrons (1s²). In the second energy level, the 2s sublevel contains two electrons (2s²), and the 2p sublevel contains six electrons (2p⁶). The 2p sublevel has three orbitals, each of which may accommodate two electrons. As a result, the 2p sublevel contains six electrons. The third energy level contains 3s² and 3p⁶ sub levels. The 3s sublevel contains two electrons, while the 3p sublevel contains six electrons.

Both sublevels' orbitals may accommodate two electrons. The 3d sublevel is also in the third energy level. It contains ten electrons (3d¹⁰). The 3d sublevel has five orbitals, each of which may hold two electrons. As a result, the 3d sublevel has ten electrons. The 4s sublevel is in the fourth energy level. It contains two electrons (4s²). Finally, the 4p sublevel contains zero electrons. As a result, the electronic configuration 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁰ is that of Chromium (Cr).

know more about electron configuration,

https://brainly.com/question/14283892

#SPJ11

Answer:

A. inverse

Explanation:

Boyle's Law is a relationship between pressure and volume. In this relationship, pressure and volume have an inverse relationship when temperature is held constant. If there is a decrease in the volume there is less space for molecules to move and therefore they collide more often, increasing the pressure.

The resulting solution is neutral when equal volumes of 1 M HF and 1 M KOH are mixed.

When equal volumes of a strong acid and a strong base are mixed, the resulting solution is neutral. In this case, 1 M HF (hydrofluoric acid) and 1 M KOH (potassium hydroxide) are both strong acids and bases, respectively.

When the HF and KOH react, they undergo a neutralization reaction:

HF + KOH → KF + H2O

The reaction between a strong acid and a strong base forms a salt (KF in this case) and water. Since KF is a neutral salt and water is neutral, the resulting solution will be neutral.

When equal volumes of 1 M HF and 1 M KOH are mixed, the resulting solution is neutral.

To know more about neutral, visit:

https://brainly.com/question/31314689

#SPJ11

Answer:

Kinetic energy, form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

It is important to keep the stopcock open after adding hydrochloric acid to the marble chips in an Erlenmeyer flask for gas collection and accurate measurement of the carbon dioxide produced during the reaction.

By allowing the gas to escape into the syringe or collection apparatus, the experiment can obtain precise gas volume measurements. Additionally, immediately replacing the stopper and syringe assembly helps prevent gas loss and maintains safety by avoiding the build-up of excessive pressure inside the flask.

These measures ensure the reliable and controlled execution of the experiment while obtaining accurate data.

Read mroe on stopcock here:https://brainly.com/question/29332945

#SPJ4

The given question is incomplete. The complete question is:

Consider the spontaneous dissolution of NaCl in water: NaCl(s) → Na+(aq) + Cl −(aq) Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.

Answer: The entropy change is positive. The free energy change for the process is negative and reaction is spontaneous.

Explanation:

Entropy is defined as the degree of randomness of a system. For a system in which randomness increses , the enetropy is said to increase and [tex]\Delta S[/tex] is positive.

As in the given reaction : [tex]NaCl(s)\rightarrow Na^+(aq)+Cl^-(aq)[/tex] , the solid is dissociating to give ions , randomness increases and thus entropy is positive.

Also the dissociation of a molecule requires energy , thus the enthalpy [tex]\Delta H[/tex] is also positive as heat is absorbed by the system.

[tex]\Delta G=\Delta H-T\Delta S[/tex]

[tex]\Delta G=(+ve)-T(+ve)[/tex]

[tex]\Delta G=-ve[/tex] when Temperature is high.

Consider the spontaneous dissolution of NaCl in water: NaCl(s) → Na+(aq) + Cl −(aq)

Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.

The given question is incomplete. The complete question is:

Consider the spontaneous dissolution of NaCl in water: NaCl(s) → Na(aq)  Cl −(aq) Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.

Answer: The entropy change is positive. The free energy change for the process is negative and reaction is spontaneous.

Explanation:

Entropy is defined as the degree of randomness of a system. For a system in which randomness increses , the enetropy is said to increase and  is positive.

As in the given reaction :  , the solid is dissociating to give ions , randomness increases and thus entropy is positive.

Also the dissociation of a molecule requires energy , thus the enthalpy  is also positive as heat is absorbed by the system.

when Temperature is high.

Which of these ideas did you include in your answer?

Have a Nice Day .

The crystal field splitting energy for the transition metal complex with a maximum absorbance of 610.7 nm is approximately 53.8 kJ/mol.

The absorbance maximum at 610.7 nm corresponds to the energy of the absorbed light, which can be calculated using the equation E = hc/λ, where E is the energy, h is Planck's constant, c is the speed of light, and λ is the wavelength. Rearranging the equation to solve for the crystal field splitting energy (Δ), we get Δ = hc/λ. Plugging in the values, Δ = (6.626 x 10^-34 J·s * 3.00 x 10^8 m/s) / (610.7 x 10^-9 m). The result is approximately 3.23 x 10^-19 J. To convert this to kJ/mol, we need to multiply by Avogadro's number (6.022 x 10^23) and divide by 1000, giving us a crystal field-splitting energy of approximately 53.8 kJ/mol. This value is obtained by calculating the energy of the absorbed light using the equation E = hc/λ, where E is the energy, h is Planck's constant, c is the speed of light, and λ is the wavelength. By rearranging the equation and plugging in the values, we can determine the crystal field splitting energy, which represents the energy difference between the d-orbitals in the complex.

To learn more about Avogadro's number, click here: brainly.com/question/28812626

#SPJ11

Answer:

A) 122 atm

Explanation:

PV = nRT

Solve for P --> P = nRT/V

n = 10.0 mol + 5.0 mol = 15.0 mol

R = 0.08206 L atm / mol K

T = 25 + 273 = 298 K

V = 3.0

P = (15.0)(0.08206)(298) / (3.0) = 122 atm